About the Job:

Job Title: Automation Engineer/Senior Automation Engineer

Location: Singapore, On-Site

Responsibilities:

· Responsible for design, coding and support of DeltaV system on site.

· Partial or full ownership in development and implementation of hardware and software solutions pertaining to industrial standards.

· Design and develop system architecture, functional specifications, control strategies and supporting documents as per industry standards.

· Review the life cycle documents/deliverables for the project.

· Determine the process requirements and translate them to automation design.

Resquirements:

· Bachelor’s degree in Automation, Electrical or Bioengineering,

· Experience in Emerson DeltaV DCS or similar, ideally in Pharma industry.

· Experience in designing and commissioning of DeltaV DCS or similar for pharma industry.

· Technical proficiency in determining hardware and software solutions for control systems.

· Familiarity with networking, field devices, control panel design and PLC control systems.

· Experience with design and configuration of communication protocols and interface between DeltaV DCS and other systems.

· Good understanding of S88 and cGMP standards.

· Highly skilled in design of Physical and Procedural layer in batch design.

· Ability to be a team player at all levels.

· Experience in automation roles for FAT, SAT and site commissioning.

· Knowledge of MES interface will be an advantage.

Interested candidates please reach out to us.

Phone: +65-92414243, Email: [email protected]

Responsibilities:

• Develop and maintain project schedules in consultation with the project team
• Coordinate and obtain inputs from project team, contractors and suppliers to support the development of project programmes
• Prepare baseline schedule which includes resources, cost loadings, S-curves, Programme Narratives, and scope appreciation presentation
• Work on progress forecast and prepare rolling programmes
• Update, track and report project progress against planned schedule
• Monitor and control progress to make sure that turnover and cost is in line with master construction program
• Ensure timely submission of materials with approvals
• Ensure project orders and deliveries are in accordance to agreed schedules
• Assist in the overall interfacing and coordination works as and when required

Requirements

• Degree in Civil / Structural Engineering recognized by Professional Engineers Board (PEB) Singapore or Building and Construction Authority (BCA)
• Good understanding of construction industry practices and standards to perform planning and scheduling
• Experience in LTA programme preparation, programme requirements and submissions
• At least 3 years’ experience in large scale projects with hands on experience doing planning and scheduling for civil and building projects
• Candidate with more experience will be considered for a senior role
• Proficient in planning software such as Primavera P6 and Microsoft Project
• Candidate with 4D BIM knowledge will have an added advantage
• Highly motivated, self-driven with initiatives to work independently to produce programmes, narrative and histograms
• Meticulous, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment

Information provided in response to this job advertisement will be treated in strict confidence and be used for recruitment purpose only.

[What the role is]

MANAGER (APPLICATION AND NETWORK INFRASTRUCTURE)

[What you will be working on]
You will be part of the project team spearheading the design, development and management of the network infrastructure projects/systems, and to strengthen in-house network infrastructure and security capabilities and retain strong domain knowledge to support new system implementation and future system enhancement. Some activities include network planning, design and setup requirements for centralized Network Access Control (NAC), Patch Management infrastructure and wireless LAN infrastructure to support the segregation of OT systems from WOG network. Managing projects’ tender matters. Involve in the technical review of the design of all various sysems to drive standardization and system interoperability with no compromise in system security. To establish architectural standards, reference models and guidelines for security, resiliency, and efficiency.

[What we are looking for]

Requirements:
• Degree in IT, Computing or related discipline;
• At least 7 years of relevant experience in project management and
development;
• Strong project management and people management skills;
• Good knowledge of various network protocols and topologies, including LAN,
WAN, switches, routers, servers, IDS/IPS, firewalls;
• Experience in networking and IT security;
• Possess drive and able to work under pressure and meet tight deadlines with a
strong sense of responsibility, initiative and resourcefulness as well as keen
interest in problem solving; and
• Strong analytical skills and excellent written, verbal communication,
presentation and negotiation skills.

· 5 days’ work week

· Central area near MRT

· Reputable and stable organization

Job Responsibilities:

· Provide pre-sales and post-sales technical support to customers and internal sales team, handling customer NDA and sample request

· Collect customers’ feedback and provide recommendation to customer for design requirements, product enhancements and capture new product opportunities

· Responsible for identifying and clarifying any technical issues related to new or existing products, and clearly communicate findings to the respective business unit

· Hands-on technical support to customers, documenting problems, and suggesting solutions

· Report design, reliability and functional problems to the appropriate groups within company & associate groups and work to solve problems

Requirements:

· Degree in Engineering (Electronics) or equivalent

· 5 years of technical customer support experience in semiconductor industry

· Field experience or hands-on practice or knowledge of multi-disciplinary system design and development

· Knowledge of Smart Card, RFID and microcontroller products; knowledge of physical access control and the security industry is desirable

· Experience with or knowledge of one or more of: CCD, CMOS image sensors, image capture, video standards, image processing

We would like to invite interested applicants to apply.

Thomas Tan

Registration No: 12C6253

License No: R2094900

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

Responsible for organizing and managing project management activities, ensuring that projects are executing smoothly and efficiently against an agreed plan and budget. Handle customer's enquires on the assigned projects and be the primary point of contact between the company and customers. Coordinate the activities of functional departments to support the project.

DUTIES & RESPONSIBILITIES:

- Conduct cost estimation and feasibility study meeting

- Prepare and submit customer final Product Print and components 2D Prin to Document Control

- Organize and chair Advanced Product Quality Planning (APQP) Team meeting

- Establish Process Flow, FMEA, Packaging Specification, Control Plan and Production Information (PPI)

- Prepare Project Schedule and PPI after reviewing with customer

- Work with Tooling Engineer to assign tooling project subcontractor and release Purchase Request

- Lead APQP Team in reviewing Design Concept and preparing the design for manufacturability and Assembly (DFMEA)

- Review design with customer

- Establish Error Proofing, Productivity and Yield

- Monitor and tracking closely on all tool-up progress, tool repair/modification and all drawing updates to ensure schedule compliance

- Submit sample and PPAP report to customer and progress tracking

- Update and release PPI and Process Flow Chart upon PPAP approval

- Conduct hand over meeting

REQUIREMENT:

- Degree / Diploma in Precision Engineering, Mechanical Engineering or Manufacturing Engineering

- Min 3 years experience with basic knowledge in Unigraphics, Solidworks, Molding & Tool making

Responsibilities:

- Collaborate with the sales/business development team to understand customer requirements and use cases

- Conduct POC, demo, testing and setup of security system and video analytics

- Process knowledge of basic security technology including video analytics and application scenarios

- Manage and execute new/existing projects

- Collaborate with product teams to address specific customer needs and feedback

- Design and propose security technology solutions tailored to different verticals

- Process market knowledge in physical security industry for verticals ie. transportation, commercial building, hospitality, etc.

- Forward looking in term of industry/technology trend to improve business portfolio

Requirements:

- Diploma or Degree in any discipline

- Ability to understand and address customer requirements and translate them into

technical solutions

- B2B (Business-to-Business) experience in robotic/physical security

- Process negotiation, networking, presentation, project management, market analysis, strategic skill will be an advantage

• 7+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

Job Responsibilities:

• Handling MEMS modules development related project independently.
• Host regular PRS review meeting with project owners of TD integration and Fab module engineers.
• Provide robust recipe to TD PI for new process developing
• Co work with fab module engineers to provide solutions for projects
• Provide risk assessments for new developing projects.
• Continuous improvement

Job Requirements:

• Bachelor degree in any Engineering discipline
• At least 3 years' experience from Etch/Diffusion/Thin Film/Photo process engineer
• Integration experience is a plus
• Capable of using DPE, 7 QC tools, FMEA, SPC, 3L5W, 8D

Job Scope:

• Develop and maintain relationships with key clients and prospects.
• Identify customer needs and provide technical solutions that align with product offerings.
• Conduct product presentations and demonstrations to clients.
• Provide technical support and advice to customers during the sales process.
• Prepare and deliver detailed product proposals, quotations, and technical documentation.
• Collaborate with engineering and product teams to ensure customer requirements are met.
• Drive sales growth through direct sales activities and follow-ups.
• Negotiate terms and close sales agreements.
• Conduct market research to identify new business opportunities and market trends.
• Provide post-sales support and ensure customer satisfaction.
• Attend trade shows, conferences, and industry events to promote products and services.
• Track and report on sales performance, targets, and project progress.
• Ensure compliance with company sales policies, pricing strategies, and technical standards.
• Assist in the development of marketing materials and sales tools.

Requirements:

• Diploma/Degree in Electronics, Electrical, Engineering, Industrial, or Mechatronics
• No experience required, entry-level candidates welcome
• Passion for automation, creative and adaptive approach
• Good communication skills, able to explain technical concepts clearly
• Product training provided
• Knowledge of PLC programming, touch panels, control, and automation

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• 5 days work week
• Location: Toa Payoh
• 2 years' contract
• Basic up to $5000

Key Responsibilities

• Setup and optimize applications and databases to meet project requirements.
• Analyze, review, and suggest software application improvements to support new services.
• Collaborate with software development teams, clients, and users to boost application performance.
• Administer applications, including user account management and configuration.
• Develop and execute comprehensive Test Plans and User Acceptance Tests (UAT).
• Prepare detailed UAT reports and maintain configuration records.
• Investigate and resolve production issues, liaising with vendors as needed.
• Manage application migrations and rollouts for new releases.
• Monitor and document application performance metrics.
• Develop tools to assist L1/L2 teams in their investigations.

Technical Expertise:

• Solid understanding of CCTV/networked camera systems and IoT management applications.
  Proficient in application design, analysis, and technical documentation.
  Knowledge of Video Management products and network fundamentals (TCP/IP, DNS, DHCP, etc.).
  Hands-on experience with Golang, Node.js, JavaScript, Windows Server OS, CentOS, Ubuntu OS, and MongoDB.
  

Education & Experience:

• Bachelor’s Degree in Computer Science, IT, or Software Engineering.
  Relevant working experience in video and IoT management applications, software analysis, and design.
  

To Apply, kindly click on the "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

• Prepare and give technical presentations to explain to customers how the products and services work.
• Work with the customers and Engineers to ensure the equipment meets the system requirements.
• Communicate with the sales team to understand consumer demands and offer sales support where necessary.
• Secure orders, guarantee product standards and assure product delivery.
• Establish customer rapport and acceptance.
• Plan for modifications to products to meet consumer demands.
• Help clients to solve problems with product usage.
• Recommend new and improved products to the customers and explain how the equipment will be more cost-effective.

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

As a Non-Volatile Engineering Group (NVEG) Engineer / Senior Product Engineer in NAND Component Reliability team at Micron Technology, Inc., you will be part of NAND product development team responsible for developing and executing NAND component reliability test strategies for Micron's newest NAND products. You will be working with a group of Engineers to test and characterize Micron's latest NAND product in all Product Reliability aspects, defining reliability gaps and work with cross functional teams to drive for resolution and to achieve product qualification on time.

Additionally, you will be working closely with NAND product, Design, R&D, Fab and Quality teams and your success will be significantly contributing to Micron's strategic objective of maintaining Technology and Product leadership.

Key Responsibilities:

• Work with NAND Reliability Architecture /TD/Media architecture/System integration teams to define and develop reliability stress, test flows and test plans to cover all Product Reliability aspects.
• Responsible for NAND Component Reliability testing execution to meet the aggressive timeline by managing the project schedule and collaborating with Reliability Operation teams for test plan execution.
• Analyze large amounts of reliability data and present it to cross functional teams to assess reliability capacity, defining reliability gaps and drive for resolution and improvements.
• Debug and identify root cause and failures in reliability tests by electric failure analysis(EFA) and Physical Failure Analysis (PFA) and drive for resolution and improvements through cross functional team collaboration.
• Work closely with Global Quality team to define qualification plan, review the qualification execution progress and drive for qualification gating issue resolution.

Requirements:

• Degree in Electrical & Electronics Engineering or related disciplines.
• Good understanding of NAND device operation, Reliability testing and NAND-System integration.
• Good knowledge of semiconductor processing and device physics.
• Good knowledge of statistics and data analysis tools.
• Excellent Problem solving and Analytical skills.
• Effective communication and presentation skills.
• Self-motivated and enthusiastic.

• Collaborate with the project manager to manage design control systems and programming for automation projects, ensuring alignment with budget and timeline expectations.
• Modify control systems, designs, and other related documents according to established processes, industry standards, and customer-specific requirements (URS).
• Participate in internal processes such as purchase, Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), debugging, testing, and validation operations for control systems.
• Assist in optimizing control systems through technical expertise in system designs and implementation.

• Manage and work closely with consultants on the design work for M&E services for MRT projects.
• Coordinate and develop the CCSM and M&E designs in partnership with LTA, SWCs, and relevant authorities.
• Interpret specifications, secure budget approval, and assist in planning and coordinating M&E services installation.
• Coordinate with consultants, subcontractors, and authorities to ensure timely, quality M&E installation and obtain necessary approvals
• Ensure compliance with construction procedures and safety practices to meet the required standards during site tests and inspections.

Requirements:

• Degree in Mechanical or Electrical engineering or equivalent or equivalent
• At least 10 years of experience including involvement in two MRT/LTA underground project
• Proficient in BIM software and AutoCAD.
• Preferred experience in writing tender specifications, with strong communication, writing, and analytical skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

Job Objectives

To support infrastructure and DevOps requirements of AML Projects for transaction monitoring across
all regions.

Key Responsibilities

• Infrastructure:
  - Work with Infrastructure Platform Services Team & Information Security Team to raise/provision/harden servers
  - Perform application specific setup for new servers
  - Set up Control-M flows for new servers
  - Simple scripting tasks

• DevOps:
  - Create and maintain our BitBucket/Artifactory pipelines for new and existing projects
  - Perform VeraCode/SonarQube scanning of code packages
  - Work with central DevOps on any initiatives

• Application Support (AML Actimize Transaction Monitoring)
  - Application support will be a smaller part of the overall role.
  - New hires will be expected to support the Actimize transaction monitoring application as well as supporting in-house programs.
  - Analyse and define detailed functional specifications (FSD).
  - Responsible for creating technical designs and documents (TDD).
  - Support all phases of testing and implementation/deployment.

Key Requirements

• Must have :-

• Commitment.
• Minimum 6 years of working experience in application testing, development and delivery.
• Ability to work in a fast-paced, team-oriented environment.
• A strong & assertive communicator in speaking & writing. Analytical mindset and good problem-solving skills.
• Delivery experience on medium to large scale projects.
• Ability to understand and articulate process flows and functions.
• Strong communication and coordination skills across internal and external stakeholders and vendors.

Good to have :-
• Prior experience in working in vendor environment.
• Prior experience with setting up servers
• 3 years working experience with AML will be nice to have.

Essential Technical Skills :-
• Experience with Oracle PL/SQL, Oracle SQL.
• Batch Scripting in both Windows and Linux
• Control-M
• Knowledgeable on WebLogic or other similar application servers (e.g. WebSphere, JBoss)
• Experience in deploying and supporting Java, Unix and Windows applications
• Experience with DevOps tools – Jenkins, Artifactory, BitBucket, SonarQube, VeraCode

Responsibilities

Architect, implement, and support technologies and platforms for the Corporate environment.

Liaising with multiple stakeholders across all areas of the business on a daily / weekly basis keeping all informed regarding issues and solutions

Maintain level 3 support for all relevant technologies.

Optimize processes and procedures where needed and leverage automation when possible.

Create, contribute, and maintain a working knowledge base and document issues that are conducive to knowledge transfer.

Ensure scalability, high availability, security, and reliability is delivered and maintained to all relevant internal and client systems.

Continuous Improvement via performance analysis and optimization, capacity management, problem management, and incident management

Participate 24x7x365 on call staff coverage.

Perform and manage any special projects/tasks assigned.

Skills/Requirement

5+ years of working experience as an Infrastructure engineer implementing and managing various technologies relevant to Corporate Technology.

Excellent and proven knowledge of Microsoft technologies including but not limited to Windows Server, Office365, Active Directory, Clustered File Services, DNS, Group Policy, DFS, PKI etc.

Strong knowledge and working experience of desktop imaging and deployment mechanisms leveraging technologies like Microsoft Deployment Toolkit, Windows ADK and WDS.

Strong experience in automation and scripting languages (Powershell knowledge preferred)

Strong knowledge and working experience with design and implementation of VDI

environments leveraging technologies like Citrix Virtual Apps and Desktops and Citrix Application Layering

HP ThinClient and HP Device Manager knowledge preferred but not required.

Experience working with various collaboration technologies: Messaging, Video, and Voice

Strong knowledge and working experience with designing, implementing, and supporting different Virtualization technology including VMware, Nutanix, and Acropolis

Experience with different storage technologies and connectivity including iSCSI and NFS.

Experience with third-party SSO providers

Experience with enterprise backup configuration and data recovery

Proven ability to work effectively independently and within a team using own initiative.

Ability to multi-task and change priorities as needed

Professionalism to support a 24/7 production environment

Responsibilities

• Configure and manage infrastructure systems, applications, and network equipment (e.g., Active Directory, data centers, firewalls, VPN, video conferencing).
• Oversee desktops, mobile, and remote devices.
• Ensure automated backups, disaster recovery processes, and system patches, with close monitoring of resource usage.
• Work with external vendors to uphold SLAs.
• Develop and update technical documentation (admin and user guides).
• Support local and international users over LAN/WAN securely.
• Identify suitable products, solutions, and suppliers for project needs.
• Provide L1/L2 support and participate in projects as a lead or team member.

Requirements:

• Diploma/Degree in Computer Science, IT, or CCNA Certification.
• At least 1 year of relevant experience.
• Proficient in enterprise networking (WAN, LAN, VPN optimization).
• Skilled in Microsoft Server (2012+), Microsoft 365, Google Suite.
• Knowledgeable in internet architecture (TCP/IP, DNS, DHCP, Proxy, Firewall).
• Familiar with Alcatel PABX, FortiGate, Cisco, and Unifi Wireless AP Controller.
• Strong understanding of CyberRisk and CyberSecurity; PDPA familiarity preferred.
• Experience with Veeam, VMware, and UNIX/Linux is beneficial.
• Background in API/Web Programming and Database Administration is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Accomplishes strategic objectives by overseeing multiple project activities
• Manage project delivery life-cycle within scope, schedule and budget using sound Project Management processes and standards
• Responsible for end-to-end project management covering requirements gathering and analysis, design, systems / software development, construction, delivery, integration, systems / data migration, testing, commissioning and maintenance services
• Map out the overall project management plan and ensure that the roles and responsibilities, objectives, commitment, deliverables, schedule, critical path and risks are clearly defined and communicated to team members and customers
• Manage project budget and costs with the objective to maximize revenue and margin achievements
• Establish a risk management plan for a structured approach to identify and review potential risks and mitigation actions
• Proactively manage changes in project delivery with proper impact analysis, resolutions and contingencies plan.
• Build a high performance delivery team, and provide effective leadership to the team members
• Maintain a pro-active and responsive relationship with all stakeholders, both internal management and customers, to provide regular and accurate progress updates, problem reporting, escalation and resolution processes
• Participate in pre-sales activities & work with solution team to develop the Request for Proposals (RFP)

Requirements

• Possess at least 3 years' experience in IT project management and have experience with handling government IT projects
• CITPM / PMP certified
• Strong interpersonal and communication skills. Able to provide excellent customer service and ensuring customer satisfaction
• Good team player and willing to work across multiple teams and functions
• Meticulous & goal-oriented to ensure project timelines are adhered to & project goals are met

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

As a Software Test Engineer, you will be responsible for Integration, Verification, Validation and Qualification (IVVQ) testing related activities alongside product deployment and configuration of Cloud Native Architecture Solution for transportation projects.

Responsibilities:

· Work with IVVQ Manager to ensure that all the requirements are properly testable – including the testing method – and that full V&V Traceability can be put in place and maintained with the verification test scenarios.

· Prepare the resources used for various test configurations, develop and implement verification procedure, compile the results documents, manage the deviations and record all verification results.

· Responsible for integration, perform factory acceptance test (Based on Singapore Factory) of Telecom sub-systems, communicate with customer, prepare report and submission to customer.

· Deploy, configure and manage the Telecom system IT infrastructure, such as servers, storage and network devices

· Configure software and hardware systems and deploy integration solutions based on Cloud technology.

· Support and/or perform troubleshooting and creating tools to resolve incidents where necessary

· Proactive to help the team in any other areas within the scope of software development life cycle.

· Deployment of on-prem data center solution (IT Infra) from hardware and OS and its services perspective

· Deployment of network solutions including firewalls

· Deployment of software on the data center and any other external hardware

· Deployment of cyber solutions

· IVVQ testing of IT infra/network/software/cyber solutions

Requirements:

· Tertiary qualification in Computer Science, Information Technology, Electrical Engineering, Electronics Engineering or related discipline (essential)

· Diploma or Degree in Electrical / Electronic / Telecommunications Engineering (preferred)

· >3 Years of direct experience in manual/automated testing, configuration and management of IT infrastructure.

· Experience in designing and developing integration solutions using APIs, micro services, and service-oriented architecture is preferred

· Strong understanding of Linux operating systems and the fundamentals of VMware ESX and related technologies.

· Knowledge of containerization technologies such as Docker and Kubernetes and cloud computing.

· Knowledge in Networking protocols and Virtualization preferably with experience in Ansible and other related IT automation tools.

· Familiarity with scripting languages such as Python, Bash, or Perl is preferred

· Strong understanding of testing methodologies and processes.

· Familiarity with test management tools, JIRA, SVN and other software tools.

· Familiarity with Railway communication systems, such as CCTV, Passenger Information, Public Address, Radio Communication, PABX.

· Experience working within a Systems Engineering lifecycle

· Experience of IT in industrial environment

· Relevant experience in similar LTA MRT projects is preferred.

· Experience in the following will be an advantage :

Ø IT Infrastructure Design and Implementation

Ø Data Centre Design and Implementation,

Ø Disaster recovery design and implementation, such as Arcserve,

Ø High Availability Systems,

Ø Virtualization (VMware, VSAN,…),

Ø Kubernetes,

Ø Storage Systems,

Ø Hardening procedures,

Ø Firewall policy implementation,

Ø L3 and L2 switches configuration and troubleshooting,

Ø System configuration & troubleshooting, and

Ø Load, Performance and Integration testing.

• Basic $4000 - $5200 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West / Northeast (Both location available)
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• BMS (Building Management System) // ACMV // Control Valve
• Mechanical Engineering - Training Provided

Job Responsibilities:

Liaison with Subcontractors:

• Coordinate with subcontractors for project updates and service execution, ensuring alignment with technical specifications.
• Monitor subcontractor performance to uphold quality and safety standards.

Client Interaction:

• Serve as the primary contact for clients regarding service inquiries and project progress.
• Attend client meetings to discuss project requirements, timelines, and address any concerns.

Project Management:

• Track and manage service projects, ensuring timely delivery and adherence to client specifications.
• Assist in preparing and submitting project documentation, including service reports and compliance materials.

Coordination of Meetings:

• Organize and participate in internal and external meetings to discuss project status and resolve issues.
• Prepare agendas and meeting notes, ensuring effective communication among stakeholders.

Documentation and Reporting:

• Maintain accurate records of project activities, subcontractor communications, and client interactions.
• Generate regular progress reports for management and stakeholders.

Continuous Improvement:

• Identify opportunities for process improvements in service delivery and communication.
• Collaborate with team members to implement best practices, enhancing operational efficiency and customer satisfaction.

Requirements:

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• Training will be provided for candidate without or with lesser experiences

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• Report to Project Director on project management, site management, and risk control to achieve project goals.
• Handle construction planning, scheduling, baseline programs, and coordinate with consultants, contractors, and suppliers.
• Monitor project schedules and report progress according to the baseline program.
• Assist PD in preparing project reports (e.g., monthly reports, VO management, EOT assessments).
• Liaise with clients, authorities, consultants, subcontractors, and suppliers on project matters, providing technical and non-technical solutions.
• Conduct technical reviews to ensure contractual compliance and timely completion.
• Support the Contracts Department with tenders, including drawings, method statements, proposals, and claims preparation.
• Attend meetings with clients, consultants, and contractors to ensure progress remains on schedule.
• Oversee quality control, safety, and EHS practices on-site, identifying high-risk activities and approving method statements.
• Undertake additional duties as assigned by management.

Requirements:

• Diploma and above in Civil Engineering or equivalents.
• Minimum of 5 years of relevant working experience.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Design systems and components that meet needs and requirements.Produce outline designs.Conduct Experiments methodically, analyse data and interpret results.Test and evaluate theoretical designs.Identify, formulate and produce effective solutions to emerging problems.Evaluate final product’s overall performance, reliability and safety.Alter and modify design to meet requirements and to eliminate malfunctionsEstimate budget and scope of project.Solicit observations from operators.Prepare product reports and documentation.Engage in lifelong learning and develop new theories or methods

1. know autocad

2. prepare electrical shop drawing / as built drawing

3. attend site meeting

4. update site progress

5. submit progress claim

6. prepare power shut down/turn on

7. prepare OMM

8. prepare catalog submission

9. can do tender

10. site check before testing & handover

11. coordinate site work with maincon

• Assist project manager to manage projects from initiation through completion, ensuring timely delivery within budget
• Coordinate with internal team and external stakeholders to ensure seamless project execution
• Oversee the design, implementation, and integration of control systems, SCADA systems, and Programmable Logic Controllers (PLCs) to meet client requirements
• Prepare and review project documentation, including project plans, specifications, technical drawings, and operation manuals
• Conduct site surveys, Factory Acceptance Test (FAT), Site Acceptance Test (SAT), and commissioning activities at client sites
• Troubleshoot and resolve issues related to system performance, hardware and software integration
• Ensure adherence to safety, quality, and regulatory standards in all projects activities
• Provide technical support and training to clients and end-users during the implementation and handover phases
• Liaise with suppliers and subcontractors to ensure delivery of materials and services on time
• Assist in preparing technical proposals and cost estimates for new projects