Job Description & Requirements

• Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.
• Ensure timely generation and issuance of NDT report on daily basis.
• The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.
• To be successful in this position, you must have the ability to demonstrate or possess:
• Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.
• Must be a PCN Level 2 or ISO Level II in the above NDT methods.
• Familiar with codes and standards.
• Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.
• Maintain a professionalism and competence at work
• Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

Applied Micro Tech Pte Ltd, is a key supplier of critical semiconductor cleanroom equipment material. We are well established both in the local industry and international arena in Asia. The business is now in the growth & expansion phase with a newly built fully-equiped facility (located in Tuas) to support semiconductor parts production , we are looking for motivated individual wanting to join us as

QC Technician Semicon

Responsibilities:

Performs inspections, checks, and samples per procedures on incoming parts and components used in the manufacture of semiconductor parts.

Performs various quality assurance duties under limited supervision. Works in accordance with Company Standard Operating Procedures (SOP).

Data entry of QC Data

Experience:

• 1 ~ 2 years of relevant experience is required.
• Experience in semiconductor/manufacturing industry is advantage

Qualification:

• ITE graduates
• Skilful and Attentive personality

Job Description

• Install, repair, test & commission cable systems (voice/data/fiber optics);
• Prepare/install cable pathways & supports where needed;
• Assist in the preparation of tools & materials used for daily work assignments;
• Troubleshoot cabling system issues & perform repairs & maintenance;
• Assist co-workers with installation & routine maintenance of structured cabling systems;
• Ensure quality, health & safety standards & report issues, if any;
• Any other duties as assigned.
• 5.5 Days work

Requirements

• Trade Cetrificate in Electrical or work- related experience
• Good communication & team work skills
• Flexibility & willingness to work overtime and night shifts occasionally (as jobs require)

Purpose of the Position

Reporting to the Shift Supervisor, the Process Technician's primary responsiblity is to ensure the smooth operation of his/her assigned Process Unit, be it in either the Field or DCS Panel Operation.

Job Description

DCS Operation

• Perform starts up and shuts down according to Standard Operating Procedures, Work Instructions or Checklists.
• Monitor and control process variables via DCS (towers, reactors, driers, compressors, etc) to maintain quality & plant in steady & efficient condition.
• Respond to process alarms, process upsets or abnormal process conditions according to established practices and procedures in order to begin or cease production as advised by Supervisor or Engineers.
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements.
• Initiate and perform Safety bypass with approval from Supervisor.

Field Operation

• Performs equipment line-ups and operate towers, reactors, driers, compressors, pumps, etc according to established practices and procedures.
• Responds to upsets or abnormal process conditions according to instructions from Supervisor or Panelman.
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements.
• Collect process samples from assigned sampling points in a safe manner.
• Equipment Inspection Tours according to checklist.

Requirements

• NITEC in Chemical Process Technology /Diploma in Chemical Engineering or related discipline.
• Min. 1-2 years Operational experience with demonstrable exposure to Process Plant Operations and site-based activity or equivalent.
• Experience in Safety Awareness programs or involvement in Safety Committees will be an added advantage.

IT Support Senior Engineer

Working hours: Mon – Fri (8.30am - 5.30pm)

Must: Candidates must be comfortable to deposit their mobile phone at their respective locker during working hours. (Landline will be provided at their workstation).

Skills & Capabilities:

• Able to support end-user computer devices (PC & mobile), office devices (printers, AV equipment), and peripherals.
• Knowledgeable and experienced in supporting Microsoft windows & office suite.
• Experience in working in an ITIL-driven environment and working knowledge of ITIL principles and processes with strong knowledge of incidents, change and configuration management and adherence processes, best practices, and policies.
• Experience in working in a team-oriented, collaborative environment & large-scale multinational environment (preferred)
• Analytical and problem-solving abilities with keen attention to detail
• Strong customer service orientation
• Strong verbal and written communication skills in local language and proficient in English (verbal & written)
• Self-directed work style with the ability prioritizes work activities and communicate politely, clearly, and effectively in support of internal customers on technical matters.
• Good understanding of Network & Infrastructure technologies (servers, storage, switches, routers, patching) and be able to provide support as guided by professional engineers or specialist.
• Ability to supervise a small team of junior engineers, guide and point of escalation for difficult or complex problems.
• Ability to identify systemic issues, continuous improvement opportunities, potential issues and raise to management.
• Ability to take on end user support and infrastructure project work support.

Expected Qualification & Work Experience

• Diploma or equivalent professional education in Information Technology or related
• At least 5 plus years of related working experience

Transport Detail:

There will be company shuttles bus from Jurong East MRT station to both sites.

Applied Micro Tech Pte Ltd, is a key supplier of critical semiconductor cleanroom equipment material. We are well established both in the local industry and international arena with offices operating in Asia. The business is now in the growth & expansion phase looking for motivated individual wanting to join us as Facility Maintenance Technician.

Location : Tuas

Responsibilities:

- Participate in maintenance and manufacturing activities

- To carry out daily checks on facility and fill up relevant checklists.

- To carry out daily patrol of facility and report on defects or abnormalities.

- To carry out housekeeping within the facility.

- Perform in preventive maintenance, checking and inspection, troubleshooting, repair of Mechanical and Electrical system

- Maintain tools and inventories in good storage.

- Complying with standards, regulations, and safe work practices

- Undertake any other duties as assigned

Requirements:

- Minimum Higher NITEC/Nitec in Engineering or equivalent.

- Possess a positive attitude and sense of urgency.

- Meticulous, keen attention to details and organized.

- Team player & able to work independently

- Willing to learn

-Some working experience in the Semiconductor Wafer fab industry

Additional Information:

- Candidates are required to move parts around of up to 15kg and handle heavy equipment.

Candidates are required to work with chemical, PPE are provided.

IT Support Junior Engineer

Working hours: Mon – Fri (8.30am - 5.30pm)

Must: Candidates must be comfortable to deposit their mobile phone at their respective locker during working hours. (Landline will be provided at their workstation).

Skills & Capabilities:

· Able to support end-user computer devices (PC & mobile), office devices (printers, AV equipment), and peripherals.

· Knowledgeable and experienced in supporting Microsoft windows & office suite.

· Experience in working in an ITIL-driven environment and working knowledge of ITIL principles and processes with strong knowledge of incidents, change and configuration management and adherence processes, best practices, and policies.

· Experience in working in a team-oriented, collaborative environment & large-scale multinational environment (preferred)

· Analytical and problem-solving abilities with keen attention to detail

· Strong customer service orientation

· Strong verbal and written communication skills

· Self-directed work style with the ability prioritizes work activities and communicate politely, clearly, and effectively in support of internal customers on technical matters.

Expected Qualification & Work Experience:

· Diploma or equivalent professional education in Information Technology or related

· 2-4 years of related working experience

Transport Detail:

There will be company shuttles bus from Jurong East MRT station to both sites.

Responsibilities:

• Responsible for day to day operations in the cement terminals to all maintenance and repair jobs including maintenance planning and scheduling of PM checks.
• To carry out and coordinate routine preventive maintenance & operations work in the plant by working closely with Plant Engineer / Senior Engineer.
• To perform necessary troubleshooting on machines and equipment (motors, bucket elevators, pneumatic gate valve, solenoid valves, air slides, mechanical/rotating parts and so on) as and when required.
• To maintain critical spare parts based on their lead time to source and availability.
• To maintain and update spare part supplier master list from time to time.
• To be responsible to control the operational expenses related to his scope of work such as spare parts purchase and contractors usage.
• To work as a team to achieve desired productivity and KPI.
• To prepare monthly physical stock reconciliation report and other reports as assigned by superior.
• To prepare and monitor the team’s overtime record and update the management accordingly.
• To initiate and support on time renewal of statutory & safety license, calibration reports and others.
• To coordinate cement sampling and testing activities for every shipment.
• To consolidate the PM checklist and upload in the SAP system.
• To assist in raising purchase requests, contract service requests, new material creation, maintenance work order updates, GRN and SES, and others.
• To liaise with suppliers on spare parts and consumable parts purchases.
• To co-ordinate cement shipment receipts operations, draft surveyors, time sheet and others.
• Maintain the general housekeeping of the plant at desired level.
• To adhere to all MOM safety standards & regulations as well as group legislative safety requirement and able to conduct tool box talk to team in small groups; establish Risk Assessment for all type of maintenance work.
• To manage the safety and oversee the duties of ad-hoc mechanical/electrical contractors as well as monitor and evaluate the quality of the work.
• Assist in all other plant/operations related works as assigned by Superior.

• To perform general maintenance duties in building & machineries & equipments.
• To perform preventive maintenance on machines & equipments bt cleaning, lubricating, greasing etc for optimization.
• To perform minior electrical work not requiring licence such as office lighting, appliances etc.
• To apply paint or varnish all types of surfaces for protection
• Perform related duties as required such as external support or repair
• To assist in recording facility utilities.
• To carry routine inspections on all operating machineries & equipments
• To ensure all ad-hoc work are carried out

Minimum ITE with relevant fields

Able to work as a team

Efficient and adhere to KPI's given

Conform to WSH guidelines

Work at height certificate a plus

We are looking for an individual who is passionate about IT and has experience in computer networking - firewall, VPN, servers, switches etc.

Career progression for candidates with aptitude and the willingness to put in the effort to grow with the company.

This position is mainly based in Penjuru with periodic deployment to customer sites depending on projects.

JOB SCOPE

• PaperCut deployment and troubleshooting
• PaperCut User Training (on-site) and Phone + Teamviewer Support
• Manages IT infrastructure related projects and services.
• Maintain and proactively improve the IT infrastructure of the company to avoid disruptions to operations. The infrastructure covers office equipment like personal computers, network, servers, photocopiers, printers, IP-PBX, CCTV.
• Manages, administers and provides support for network infrastructure and network/firewall/VPN change requests.
• Overall responsible for, procure and maintain inventory of the necessary hardware
• Escalation point for IT operations matters, pertaining to system, CCTV, network, and voice services.
• Manage network capacity and email administration such as creating/maintaining user ids and email addresses.
• Responsible for the stable operation of the in-house computer software systems and network connections.
• Any other related IT technical support work

-----------------------------------------------------------------------------------

REQUIREMENTS

• Minimum Qualifications Diploma/Degree in BSc or BEng in Computer Science/Infocommunication/Internetworking or related disciplines
• At least 2 year(s) of relevant experience in network & Internet services, computer & mobile devices and information system
• In-depth hands-on experience in configuring and troubleshooting routers and switches network equipment as well as FortiGate firewall and its implement in corporate as well as hosting networks.
• Linux, Mac and Windows Admin skills.
• Good knowledge in managing and configuring virtualization environment, KVM, Hyper-V, Vmware.
• Admin experience in Office365, LDAP, Active Directory, AzureAD
• Experience with various open-source monitoring tools like Wireshark.
• Excellent troubleshooting, problem-solving and analytical skills.
• Good attitude and a willingness to learn
• Patient and meticulous
• PaperCut experience an advantage (Training will be provided)
• Class 2B or Class 3 (Manual) license is an advantage.

Other Job Details

• Report to office at Penjuru (West) and will be dispatched to customer's sites when required
• 5 day work week (Mon-Fri 8.30am-6pm)

Starting salary commensurates with candidate's aptitude, experience and skill.

• He will be responsible to carry out field duties according to the Standard Operating Procedures (SOPs) and / or Operation Supervisor’s instructions.
• Perform unit start-up, shutdown and plant turnaround activities according to the Standard Operating Procedures (SOPs)
• Perform planned rounds (Field / DCS) and take corrective action to maintain equipment and plant operations within safe operating limits and product quality compliance.
• Monitor unit performance to ensure safe and optimal operation of the plant equipment, pipeline distribution network and other facilities.
• Prepare process equipment for maintenance service, this includes line purging, LOTO
• Take part in operating procedures development and prepare job pack documentation for equipment repair.
• Perform troubleshooting, resolve field operational issues and provide support for engineering, operation and maintenance team.
• Executions according to production schedules and achieve operation targets in a cost-effective manner.
• Perform any other tasks which may be assigned to him by Ops Supervisor or Ops Manager
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• Minimum GCE ‘N’ Level certification with 3 – 5 years of relevant work experience.
• Candidates without any relevant experience will be considered as training will be provided.
• Experience in ISO-tanker unloading, incineration and water treatment operations will be added advantages.
• Candidate with a forklift license is a plus point.
• Must be prepared to work rotating shifts, weekends and Public Holidays
• An effective team player with good communication skills.
• Other duties as assigned.

• Marine Engineering
• Basic $3000 - $4000
• 5 days (Office Hours)
• Tuas (Walking Distance from MRT)

Responsibilities:

• Assist database (MySQL, MariaDB, etc) and server (Linx, Windows) setup, maintenance, and performance optimization for equipment remote monitoring system.
• Develop software in Python to use machine learning on equipment sensor data.
• Collaborate on projects, monitor system performance, troubleshoot issues, and engage in continuous learning.
• Support other IT-related requirements in the office.

Requirements:

• Degree in Computer Science, IT, or equivalent.
• Basic knowledge of database and server OS; experience with Python.
• Machine learning, Tableau, SQL, and Linux beneficial.
• Proactive, eager to learn, and contribute to team success.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R1873990 | Lucky Lee

Responsibilities

· Perform overhead cranes, gantry cranes, monorail cranes electrical installation and troubleshooting task, repairs and parts replacement to resolve related site issues

· Recommendation of part replacement to ensure continuous operation of the equipment

· Coordinate and liaise with Project Engineer/Manager and respective supervisor on tasks and works relating to the project

· Responsible for doing control panel and any other works related to Electrical duties

· Ensure compliance with relevant standard

· Ensure compliance with company’s Quality Management Systems

· Working closely with Supervisor and Mechanical team to get the job done

· Ensure service and work readiness during office works hours and after hours

· Other ad-hoc duties as assigned

Requirement

Diploma/Degree in Electrical/Electronic

Minimum 2 to 3 years in the Crane industry

Knowledge of crane troubleshooting, various brands of inverters, PLC system.

Ability to generate Electrical drawings in accordance to Singapore standards a plus

Holders of Driving Licence Class 3

Under strict supervision, conducts tests on materials, components, subassemblies, and tools. Acquire basic knowledge of test procedures and techniques. Documents test procedures, data, observations, and results. Assemble components for prototype tools and for tests. Acquire basic knowledge of assembly tools and techniques. Documents assembly procedures and techniques. Learns and applies company sanctioned standards and specifications. Acquire basic knowledge of materials, components, and their application. Incorporate Reliability, HSE and Quality analysis techniques in all job processes. Error is readily ascertainable by the supervisor and can be corrected in relatively short time frames. Entry level position, no experience required.

In this role, you will provide support to the Engineer / Plant Manager and work together with the Operations team to achieve operational excellence in a wastewater treatment facility and related infrastructure within a client site.

Job Description:

• To have good knowledge of wastewater treatment including pre-treatment, biological treatment, sludge separation and related applications in a wastewater treatment plant.
• Develop, maintain and optimise all process documents including SOP, RA, training material, etc.
• Evaluate and troubleshoot any equipment or process problems that affect the operation target of the Plant.
• Support environmental compliance by monitoring all the plant inlet, operating and effluent data to ensure corrective action is taken when needed.
• Perform operational duties in the plant in accordance with SOP’s and training including assisting with water sampling and analysis, loading, dosing, unloading and maintenance as required.
• Assist in studying processing schedules, engineering recommendations, and lab analysis results to determine sound changes in process unit control in order to achieve target throughput.
• Provide proactive support to the Engineer or Plant Manager to ensure the wastewater plant is operating to maintain safety, environmental, and operational priorities at the optimum production level.
• Perform calculations for determining process parameters, mass balance and material balances.
• Support any other site activities as delegated by the Engineer or Plant Manager.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine.
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• Minimum 2-3 years of experience in wastewater plant operations preferred
• Capability in chemistry will be advantageous
• Self-motivated and able to handle wide spectrum of responsibilities (Process, Safety & Maintenance)
• Must be able to work in rotating 12h shift (8am to 8pm/8pm to 8am)

Incumbent will be placed in Tuas South/Jurong Island at Client's vicinity.

Candidates are to indicate your current & expected monthly salary in your resume.

Responsible for maintaining sound EHS working conditions.

Follows Standard Operating Procedures (SOPs) to operate and monitor manufacturing equipment, and responds to alerts during production.

Handles production materials within the facilities and performs cleaning and sterilisation activities.

Tasked with the day-to-day operations of individual manufacturing equipment.

Must adhere to Health, Safety and Environment (HSE) regulations at all times in order to protect both employees as well as the quality of the products.

Store materials according to Standard Operating Procedures (SOPs).

Dispose degraded and contaminated materials according to SOPs.

Input information into the inventory management system.

Carry out batch dispensing operations.

Prepare materials, equipment and solvents required for cleaning and sterilization.

Perform manual and automated cleaning and sterilisation of equipment, containers, cleanrooms and facilities.

Perform calibration and pre-startup checks on manufacturing equipment according to SOPs.

Operate filling and packaging equipment.

Identify opportunities to improve production activities within one’s work areas.

Follows proper sequence of operation, specifications and operating instructions for processing equipment.

May conduct basic tests and measurements throughout stages of production to determine control over such variables as temperature, density, pressure and viscosity.

Ensure continuous compliance to Good Manufacturing Procedures (cGMP).

Troubleshoot and resolve packaging quality issues and monitored the corrective actions.

Services, troubleshoots and solves standard engineering problems with processes or equipment already in operations.

Follows processes and procedures to ensure compliance with regulations.

Assist department in achieving company’s Key Performance Indexes (KPIs).

Follow the packaging line schedule to ensure timely delivery to customers.

Veolia is one of the largest environmental services organizations in Singapore. We are providing integrated waste management solutions to industrial, commercial, municipal and residential customers, including collection, sorting and recycling of hazardous and non-hazardous waste, industrial services as well as public cleansing.

Senior Operations Technician (DCS)

Environment, Health and Safety (EHS)

• Comply to Veolia Life Saving Rules while performing work inside company premises
• Effectively participate and contribute in company EHS programmes and initiatives
• Comply to all EHS procedure (SOP) and work process such as Lock Out Tag Out (LOTO) Procedure, Permit to Work (PTW) Procedure, Work at Height (WAH) Procedure, Confined Space (CS) Entrance Procedure, Hot Work Procedure and etc
• Comply in reporting and highlighting any plant EHS/Process incident or near misses
• Comply with company training requirements
• Participate as team members in Risk Assessment (RA) development, Management of Change (MOC) implementation and Pre-StartUp Safety Review (PSSR) activity
• Responsible to ensure plant, work station, control room and individual locker cabinet is maintaining in good housekeeping conditions and comply with company 5S procedure

Emergency Response

• To attend fire fighting training and be part of Company Emergency Response Team (CERT)
• To participate in company emergency drill and response exercise
• Be familiar in term of function and operational of company fire fighting system and safety gear (Including SCBA and Bunker Coat)

Operational

• Responsible to operate Both Hot and Cold DCS console which include process monitoring and parameter adjustment in order to achieve production target without any safety issues or noncompliance
• Study processing schedules, engineering recommendations, lab analysis results to determine sound changes in process unit control
• Record and compile DCS operating data for monitoring purpose and take necessary actions if any deviation or abnormalities observe
• At a time, go to the site to do site monitoring and observe flame pattern at the incineration unit in order to optimize the production process
• Coordinate start-up, shut-down and normal operations/maintenance activities with Operation Supervisor and Operation Technician
• Perform basic calculations for determining process parameters and material balances
• Responsible for alarm management of the DCS and ESD systems and provide valuable input to manage the process units
• Highlight to Supervisor on duty in the event of any abnormality which can affect plant production and safety
• Perform troubleshooting at DCS/field level, resolve operational issues at DCS/field and provide support for the engineering, operation and maintenance team
• As identified, to ensure and comply with technical competency requirements such as Boiler Attendance or Steam Engineer
• Provide support for the engineering team on new project initiatives and implementation
• Participate and proactively contribute in any type of root cause analysis i.e WIR
• Support any other site activities as delegated by the Operation Supervisor or Operation Manager
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• Minimum GCE ‘N’ Level certification with min of 8 years of relevant work experience
• Experience in ISO-tanker unloading, incineration system, waste heat boiler system, and water treatment operations will be added advantages
• Candidates with Manage Working at Height Training Certificates and Accessor Work Inside Confined Space Training Certificate is a plus point
• Candidates with 2nd grade steam engineer, class 1/2 boiler cert are highly encourage to apply
• Candidate attended fire fighting training certificate, Site Incident Commander (SIC) certificate and had experience as part of CERT team members is a plus point as well
• As identified, candidate to be open to step up as shift supervisor coverage in the absence of shift supervisor
• Must be prepared to do either in rotating shifts or normal day working hours, overtime, weekends and Public Holidays depending on schedule assigned
• An effective team player with good communication skills
• Other duties as assigned.

Successful candidate will be working in the main office located at 15 Tuas View Circuit Singapore 636968.

Job Description

• Efficiently and effectively manage and operate assigned processing or packaging operation according to the standardized operating procedures, guides and manual
• Ensure the correct cleaning and sanitation of processing equipment are rendered following Good Manufacturing practices

Job Requirement

• A good team player to achieve production targets
• Self motivated and work with least supervision
• Able to be on the feet for long hours
• Transportation provided
• Candidates with relevant experience are preferable
• More focused on attitude rather than educational level
• 5.5 days week with OT's & perks

**Position Overview:**

The IT Support Engineer is a key member of the IT department responsible for providing technical assistance, troubleshooting, and support to end-users within the organization. This role involves resolving hardware and software issues, setting up and maintaining systems, and ensuring smooth technology operations to enhance productivity and minimize downtime.

**Key Responsibilities:**

1. **Technical Support:**

- Respond to user inquiries and technical issues via phone, email, or in-person promptly and professionally.

- Diagnose and resolve hardware, software, and network-related problems efficiently.

- Provide step-by-step guidance to users on issue resolution or workaround solutions.

2. **End-User Assistance:**

- Assist users with software installations, updates, and configurations.

- Educate users on best practices for using hardware, software, and applications effectively.

3. **Hardware and Software Maintenance:**

- Install, configure, and maintain computer systems, laptops, printers, and peripherals.

- Perform regular updates, patches, and security measures on software and systems.

- Troubleshoot and repair hardware components as needed.

4. **Network Support:**

- Troubleshoot network connectivity issues, both wired and wireless.

- Assist in setting up and managing network devices, such as routers, switches, and firewalls.

5. **System Administration:**

- Maintain user accounts, permissions, and access levels.

- Assist in the administration of servers, domains, and other IT infrastructure.

6. **Documentation and Reporting:**

- Maintain accurate records of support requests, resolutions, and actions taken.

- Provide reports on recurring issues, trends, and improvements to management.

7. **Remote Support:**

- Provide remote assistance to off-site users, ensuring their technical needs are met.

8. **IT Projects:**

- Collaborate with the IT team on various projects, such as system upgrades, migrations, and implementations.

9. **Training and Knowledge Sharing:**

- Conduct training sessions or workshops for users to enhance their IT skills and knowledge.

- Share technical knowledge with colleagues to foster a learning culture.

**Qualifications:**

- Bachelor's degree in Information Technology, Computer Science, or related field (or equivalent experience).

- Relevant certifications (e.g., CompTIA A+, Microsoft Certified: Azure

Fundamentals) are advantageous.

- Proven experience in providing technical support and troubleshooting.

- Strong knowledge of hardware, operating systems (Windows, macOS), and common software applications.

- Familiarity with network fundamentals, including TCP/IP, DNS, DHCP.

- Excellent problem-solving and communication skills.

- Customer-oriented approach and the ability to work well with end-users.

- Ability to work independently, manage priorities, and meet deadlines.

- Adaptability to changing technologies and environments.

**Benefits:**

include competitive salary, a dynamic work environment.

Job Description:

• Responsible for IT Infrastructure setup, maintenance and operations
• Provide end user support on desktop/ laptop/ printers/ networking and software. Engaged with user by IT request form for the new/ replacement of IT hardware and software installation & configuration, troubleshooting and setup
• Ensure security of data, network access and backup systems
• Good knowledge in network and servers security and problem solving
• Develop, implement and coordinate systems, policies and procedures
• Handle IT projects and system implementation which involve gathering information, designing and planning. Conduct User acceptance test and provide user training
• Manage and liaise with external system vendors such as Sage ACCPAC, ParaDM and HR Payroll system
• Provide advice and recommendations to management on process and techniques for improved work operations
• Handling all the IT functions of the Company and its subsidiary, which are located in Singapore and Malaysia respectively

Requirements:

• NITEC/ Diploma in Information Technology or equivalent
• Strong technical and analytical skills
• Basic networking skill preferably able to setup and troubleshoot
• Able to plan and work independently with minimal supervision
• Positive attitude towards learning and performing hands-on technical work
• 2 to 3 years of support experience in manufacturing sector would be an advantage

Job Description

• To provide internal technical support, answering support queries either onsite or via email
• Setting up e-mails for staff requirement
• To perform monthly system health checks and reporting
• To configure/trouble network managed switches
• To provide support on Microsoft 365 solution
• To implement and configure new tools, fix bugs, and assist staff to use IT systems
• Provide IT/End user support (Setup and deploy computers, IT equipment, software, patches, troubleshooting and etc.)
• Incident Management workflow, including appropriate and timely escalation
• Initiate 3rd party vendor support requests if required
• Identify and resolve any IT problem that arises
• Other ad-hoc duty instructed by IT Manager

Job Requirements

• Minimum Higher Nitec or Diploma in Information Technology, Computer Science or relevant
• Fresh Grad / Entry Level / Any work experience as a Technical Support Assistant, Desktop Support Assistant, IT Help Desk Technician or similar role.
• Ability to diagnose and troubleshoot basic technical issues etc.
• 3-months renewable contract basis.
• 5 days work week.

Others

• Annual Leave / Medical & Dental Benefits after 3 months with Company.
• Transport available near Boon Lay MRT.
• Lunch provided.

The incumbent operates all equipment and facilities in his assigned area safely and efficiently. He works closely in a team and within the framework of current Good Manufacturing Practice (cGMP), Safety, Quality and Continuous Improvement.

Responsibilities

• Performs batch / unit or ancillary operations safely and efficiently following standard operating procedures and as necessary, leads technicians in unit operations. Takes in process samples and carries out checks using analytical instruments.
• Do routine mechanical and lubrication checks and where required, carries out early maintenance and repair using hand tools.
• Performs materials handling and movement using hand-pallet trucks, forklift or other material handling equipment.
• Ensures that batch and operating log sheets are correctly recorded and complied. Follows Good Documentation Practices and ALCOA+ principles when executing instructions and recording data, and adheres to Document Error management procedures if document error is observed.
• Communicates clearly with his supervisors and colleagues and at the end of his shift, hand-over to the following shift technicians highlighting production status and any items bearing on safety, quality and efficiency.
• Do engineering-related work with technicians during process runs, plant configuration during the campaign change over or maintenance using handtools. E.g.: filters change, equipment replacement and other plant-care type engineering work. Prepares plant and equipment for engineering maintenance.
• Inspects and maintains house-keeping of his assigned area for clean and safe working conditions as well as ensuring that personal protection equipment, safety and fire-fighting equipment are maintained ready for use.
• Carries out fire fighting / first-aid duties as assigned and trained.
• Carries out other related duties as assigned by the Shift Team Leader /Shift Production Leader.
• Initiate, encourage and implement Lean Sigma activities and implement JDI projects that lead to reduce overall cost and improve cost effectiveness e.g. improve equipment reliability, standardization, etc.

Knowledge, Skills & Experience

• Diploma certificate from Polytechnic
• Holder of ITC / NTC 2 or NTC 3 with some experience in related field
• Familiar with good manufacturing practices, safety procedures
• Trouble shooting skill
• Basic awareness of industrial standards
• Able to work in a fast pace environment
• Good knowledge in maintenance and operating principles of production
• Good communications skills

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why Us?

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organization where people can thrive. Getting ahead means preventing disease as well as treating it, and we aim to positively impact the health of 2.5 billion people by the end of 2030.


Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

JR: 387163

Roles & Responsibilities

· To perform field support activities both in Company premises as well as on site, I.e. to perform engineering work such as dismantling, maintenance, repair, overhaul & installation works.

· In the course of work, he must ensure his work adheres to the required security, safety & quality standards in the company. He needs to co-ordinate job activities to consistently meet timeline, customer job requirements and statutory regulations. And, to prepare service reports upon completion of jobs.

· Secondary appointment is to perform collection and delivery of goods from and to the Customers’ locations, physical check of collected and delivered platforms, liaising with customers and other tasks as and when required by his Supervisor.

• Others ad-hoc duties as assigned

Requirements:

· Able to read and understand English

· Able to use basic hand tools, power tools, production equipment related to assembly trade such as torque wrench & lifting equipment

· Able to operate basic workshop equipment like drilling, welding, grinding

· Must be open to commit for OT

· Class 3 Driver’s License is an advantage

Job Responsibilities:

• Knowledge in understanding the Schematic Diagram.
• Report to the production manager regarding of the progression.
• Performing the electrical wiring, termination, installation as per drawing for control panel, instruments and machine.
• Troubleshooting, testing and commissioning (electrical part).
• 1 - 3 years of relevant working experience in handling the forklift.
• Preferably to have experience in electrical , shipyard, oil and gas and petrochemical
• Able to work independently and proactively and work under fast pace environment.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives. Our dedication to excellence and our strong track record have earned us a distinctive reputation for quality and trust as an integrated engineering group, spanning across the aerospace, smart city, defence and public security segments.

Collaboration is key to our success. We prioritize open communication, constructive feedback, and a willingness to help others. We are committed to creating a supportive work environment that encourages excellence, innovation, and continuous improvement. We're looking for individuals who share our values and are excited to join us on our cyber mission.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

Job Description:

• Responsible for the creation, organization, execution, completion, and maintenance of projects
• Manage scope and quality in alignment with stakeholders and manage risks and issues along the entire lifecycle and help the team remove blockers and solve problems
• Effectively communicate and manage stakeholder expectations and provide status information regularly
• Drive detailed technical discussions and manage the team to deliver a successful implementation
• Provide effective leadership to the team in solving problems, cultivate team cohesiveness & teamwork
• Manage projects that will involve development (hardware, firmware, software) and production
• Overseeing the entire project so that all required documentation is complete

Job Requirements:

• 3+ years of project management experience
• Experience in product development and/or software development
• Familiar with network infrastructure
• Strong management skills, including coaching, team-building, and conflict resolution
• Excellent interpersonal and communication skills
• Results-oriented mindset to achieve and exceed project goals.
• Project management certification like PMP or equivalent
• ITIL and CISSP is an added advantage
• Passion to learn and able to follow processes
• Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.