Responsibilities:

1. Involve in manufactory processes

• Supervise process flow control
• Supervise machine/equipment setting control
• Quality Control in between processes
• Monitor issues and matters on manpower

2. Provide positive suggestions on improvement on process

3. Suggest machines/equipment alteration for better control and preventive maintenance programme

4. Ensure strict GMP control and guidelines

5. Any other assignment by Management

Requirement:

· Diploma in Pharmaceutical Technology

Job Responsibilities:

• Knowledgeable in servicing and maintenance for refrigeration / electrical machines.
• Identifying faults, troubleshoot, and repair various commercial kitchen equipment.
• Performing repair jobs promptly and efficiently.
• Submitting of daily report for servicing & maintenance functions.
• Ensure all documents are updated upon completion of work
• Ensuring all works comply with the appliance standards and Health and Safety Act.
• Perform equipment quality compliance check.
• Work closely with direct superior to maximize repair rates.
• Maintaining service vehicle in good condition.
• Maintain the work bay and workshop areas in orderly and safe working conditions and exercise good housekeeping practice.
• Any other duties as assigned.

Job Requirements:

• Hands-on experience in installation, maintenance, troubleshooting and/or repairs in electrical machines and mechanical diagnostic skills.
• Possess a valid Singapore class 3 driving license is preferred.
• Other relevant skills or experience we will consider to be of benefit.
• Basic and/or excellent written (English)

Mission/purpose of the Job:

• Responsible for vehicle repair, diagnostic, service maintenance.
• Ensure all assigned jobs are carried out according to UD/Volvo Quality Standards.

Key responsibilities/Accountabilities:

• To perform all basic troubleshooting and basic diagnostics with appropriate recommendations (With guidance from Team Leaders where appropriate)
• To check and provide correct recommended Parts details in the Work Order as and when required.
• To carry out Service Maintenance on the trucks including:

- Power Steering Diagnostics and Repair

- Engine Overhaul

- ESCOT Control Housing Overhaul

- ESCOT Gearbox Overhaul

- Rear Axle Overhaul

- Advanced Multimeter Measurements and Wiring Repair

- Emission Related System

- Fault tracing and repair electrical system via Tech Tool test, Calibrate and programming

• To perform all repairs (Mechanical, Electrical, Electronic etc)
• To ensure Utilization, Efficiency and Productivity is achieved.
• To record repair time and detail of repair in the Work Order.
• To keep Team Leader updated on the repair details and repair requirements.
• Adhere to Warranty Process and Procedures (Warranty tagging of parts, return and storage of warranty parts etc)
• Ensure good housekeeping of work bay.
• Accountable for all tools and equipment handling and usage.
• Ethical compliance of genuine parts replacement and service rendered according to the checklist and scope of works.
• Ensure all service and repairs are performed thoroughly and in accordance to good quality practice and procedures adhering to manufacturers standard 4 (Singapore).
• Lead by example to ensure high level of Health & Safety performance within the area of responsibility.
• Attend upgrading courses as and when available
• To attend to breakdown where necessary and to be equipped with a valid Class 3/4 driving license.
• Adhere to UD/Volvo processes and policies.
• Any other duties assigned by your immediate superior.

Essential educational and/or training qualifications and certificates

• NITEC in Automotive Technology or former NTC 3/2 in Motor Vehicle Mechanics or NTC 3/2 Heavy Duty Diesel Mechanics or Diploma in Automotive Engineering or related field.
• Preferred with valid Class 3 / 4 / 5 driving license (Singapore).

Preferred experience and knowledge

• Minimum of 4 – 6 years working experience in servicing and repairing heavy trucks (Japanese and Continental brands).
• Basic Vehicle Principles and Concepts.
• Advanced engine, transmission and brake system knowledge.
• Multi-meter basic electrical values.
• Knowledge in vehicle electrical circuit diagram.

Necessary technical/functional/language skills

• Basic Hydraulics
• Power Steering Diagnostics & Repair
• Brake System & Diagnostics
• Diesel Engine
• Electrical Wiring Repair
• Multimeter Advanced Measurements
• Engine Overhaul
• Emission Related System
• Preventive Maintenance
• Transmission check and adjustments
• Rear Axle Overhaul
• ESCOT Gearbox Overhaul, Control Housing Overhaul, Voith Retarder Overhaul
• Telematics
• Compressor cooling basic
• Computer skill
• Completed Curriculum and related Assessment for Technician Level III –Service & Basic Repair

Benefits:

• Festive Leave

• Birthday Leave

• 5 days work week

Job Overview:

We are seeking a dedicated and customer-focused IT User Helpdesk Technician to provide technical support and troubleshooting assistance to end users. The ideal candidate will have strong communication skills, a good understanding of IT systems and hardware, and the ability to resolve technical issues quickly and efficiently. You will be the first point of contact for users experiencing technical difficulties, ensuring a smooth and productive work environment.

Key Responsibilities:

• First-Line Support: Provide technical support to end-users via phone, email, or in person, addressing issues related to in-house software.
• Troubleshooting and Issue Resolution: Diagnose and resolve basic to intermediate technical issues.
• User Account Management: Assist with user account creation, password resets, and permissions management in Active Directory or similar systems.
• Documentation: Maintain clear and accurate documentation of technical issues and solutions for future reference, knowledge sharing, and troubleshooting.
• Escalation: Escalate complex or unresolved technical issues to the appropriate IT personnel or third-party vendors as needed.

Applicants who possess the relevant experience or interest are most welcome to apply.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Chan Mui Lee (Sandy)

Registration Number: R1108925

EA Licence No: 06C2859 (MCI Career Services Pte Ltd)

Our Production Technicians operate our chemical processes and perform production related activities, utilizing their chemical manufacturing knowledge and experience to operate and troubleshoot the plant in a safe and efficient manner. The Production Technician works in a team environment where collaboration and teamwork are critical to meeting the goals of the business.

Production Technicians are required to work shift work including nights, weekends, and holidays.

Job Responsibilities include but are not limited to:
- Safely and efficiently operates their assigned processes to meet the day-to-day quality, production and productivity goals of ALAM.
- Effectively prioritizes their daily tasks working with the Production Leads and Production Supervisors.
- Participate in monthly safety meetings and promote a safe work environment
- Actively participate on ALAM’s emergency response (ER) team and ER entry team
- Reviews and updates the Standard Operating Procedures
- Reviews and updates the Learning Resources for the processes
- Completes annual personal goals to achieve the plant goals and their own personal development goals
- Assembles and disassembles production equipment
- Performs basic maintenance on equipment
- Drives a culture of "Do It Safe, Do It Right the First Time" with their actions and their words on a daily basis
- Successfully complete all assigned training
- Cross-trains peers on approved functions
- Ability to roll cylinders- Rolling cylinders requires an individual to tilt a cylinder slightly with one hand, and use the other hand to move the cylinder forward by rolling it
- Fitness for duty, including but not limited to: ability to lift 50 pounds and have the ability to climb ladders
- Actively participate on ALAM’s emergency response (ER) team including as an ER entry team member, which requires wearing a tight fitting full-face respirator

Established company located in Tuas looking for experienced production technician to join its production team. Candidate have sound knowledge in operating and maintaining CNC router machine, Fiber/ CO2 laser-cutting machine, large-format production printer.

Working hour is from 9am to 5.45pm (Mon to Fri); 9am to 1pm (Sat); Rest day (Sun & PH).

Interested party, please whatsapp Eric @92744949 or email to [email protected]

• Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T).
• Programs lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.
• Sets-up lathes and adjusting three- and four-jaw chucks, tools, and attachments.
• Verifies settings by measuring positions, first-run part, and sample workpieces; adhering to Drawing Requirements.
• Maintains equipment by completing preventive maintenance requirements; following manufacturer’s instructions;
• Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs.
• Documents actions by completing production and quality logs.
• Maintains safe operations by adhering to safety procedures and regulations.
• Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.

a) Collaborate with stakeholders to gather requirements, understand and document business needs, business requirements and flows related to the Authority’s public services and application systems;

b) Review business rules and service journeys, gathering requirement specifications, engaging stakeholders, creating user journey maps and wireframes, and providing support on updates to the Authority;

c) Develop user stories, specifications, acceptance criteria, and create detailed process maps to visualise, understand and streamline current workflows and business processes;

d) Review design specifications and project deliverables (e.g. monthly project report, log review for privileged user access, test plan, test reports, application design/ code) to ensure the completeness for the Authority’s acceptance;

e) Understand and review source codes from vendor(s) for deployment;

f) Support and review on-site acceptance and System Integration Testing

(SIT);

g) Facilitate and support User Acceptance Test (UAT) and trainings for users;

h) Conduct technical review and assessment of End of Support (EOS) upgrade proposals before making recommendations to the Authority;

i) Coordinate, facilitate and support any audit to be conducted by the Authority’s appointed auditor(s) on the system;

j) Project management and governance, ensuring performance and fulfilment of contractual obligations by the Authority’s appointed contractor managing the collection system.

k) Provide maintenance and technical operations support for the Authority’s systems which include:

i. Perform continuous review and recommend improvement to the project, system managed by the Authority’s appointed contractors or business processes of the Authority’s systems.

ii. Manage, review and ensure compliance by the Authority’s appointed contractors on the Authority’s policies, security advisories, vulnerabilities, circulars, Government Instructions Manual requirements, polls, etc. issued and applicable for the Authority’s systems;

iii. Review and validating test cases and results for enhancements to ensure that requirements are met; and

iv. Develop and maintain documentations related to the works performed.

l) Reviewing impact analysis of all system modifications or new requirements on the functionality, performance, and security of the systems, which includes:

i. Collaborate with business stakeholders and work closely with external parties, ICT providers or government agencies for systems operational and maintenance works and new initiatives/enhancements;

ii. Involved in the review and tracking the activities of the Service Request life cycle; and

iii. Review of contractor’s man-efforts and solutioning.

m) Work closely with external parties, ICT providers or government agencies for the operational and maintenance works and new initiatives/enhancements of the Authority’s systems;

n) Performing hands-on development as part of exploration of new technologies/products and automation of existing processes;

o) Participate and support in incident, troubleshooting, testing and verification of reported issues, incidents and to follow up with the Authority’s appointed contractors, stakeholders and business users to ensure timely escalation where required and completion and closure of the issues or incident; and

p) Ensure that the deliveries of the project by the Authority’s appointed contractors are compliant with relevant policies and guidelines and to identify and close any compliance gaps.

2. The Three (3) Onshore IT System/Business Analysts proposed by the Contractor shall have at least 3 years of IT experience and the following qualifications and experiences:

a) Bachelor’s degree in Computer Science, Information/ Infocom Technology, or related discipline would be preferred;

b) Strong knowledge in application support and maintenance and possesses hands-on’ knowledge and experience in end-to-end Software Development Life Cycle;

c) Experience in IT project implementation, specifically on user requirements gathering, IT business analysis, applic1ation solutioning, UI/UX design and using automated testing software such as Tricentis TOSCA would be an added advantage;

d) Experience in the following would be advantageous:

i. Cloud platform and technology;

ii. Application development using Power builder, Java, Delphi or ASP.Net; and

iii. Government projects.

e) Experience with stakeholder management;

f) Have a positive attitude and good interpersonal skills, able to work and communicate effectively with stakeholders to ensure business needs are met; and

g) Experience in working under minimal supervision and to demonstrate ability to ensure tasks are well completed and project is on schedule.

a) Collaborate with stakeholders to gather requirements, understand and document business needs, business requirements and flows related to the Authority’s public services and application systems;

b) Review business rules and service journeys, gathering requirement specifications, engaging stakeholders, creating user journey maps and wireframes, and providing support on updates to the Authority;

c) Develop user stories, specifications, acceptance criteria, and create detailed process maps to visualise, understand and streamline current workflows and business processes;

d) Review design specifications and project deliverables (e.g. monthly project report, log review for privileged user access, test plan, test reports, application design/ code) to ensure the completeness for the Authority’s acceptance;

e) Understand and review source codes from vendor(s) for deployment;

f) Support and review on-site acceptance and System Integration Testing

(SIT);

g) Facilitate and support User Acceptance Test (UAT) and trainings for users;

h) Conduct technical review and assessment of End of Support (EOS) upgrade proposals before making recommendations to the Authority;

i) Coordinate, facilitate and support any audit to be conducted by the Authority’s appointed auditor(s) on the system;

j) Project management and governance, ensuring performance and fulfilment of contractual obligations by the Authority’s appointed contractor managing the collection system.

k) Provide maintenance and technical operations support for the Authority’s systems which include:

i. Perform continuous review and recommend improvement to the project, system managed by the Authority’s appointed contractors or business processes of the Authority’s systems.

ii. Manage, review and ensure compliance by the Authority’s appointed contractors on the Authority’s policies, security advisories, vulnerabilities, circulars, Government Instructions Manual requirements, polls, etc. issued and applicable for the Authority’s systems;

iii. Review and validating test cases and results for enhancements to ensure that requirements are met; and

iv. Develop and maintain documentations related to the works performed.

l) Reviewing impact analysis of all system modifications or new requirements on the functionality, performance, and security of the systems, which includes:

i. Collaborate with business stakeholders and work closely with external parties, ICT providers or government agencies for systems operational and maintenance works and new initiatives/enhancements;

ii. Involved in the review and tracking the activities of the Service Request life cycle; and

iii. Review of contractor’s man-efforts and solutioning.

m) Work closely with external parties, ICT providers or government agencies for the operational and maintenance works and new initiatives/enhancements of the Authority’s systems;

n) Performing hands-on development as part of exploration of new technologies/products and automation of existing processes;

o) Participate and support in incident, troubleshooting, testing and verification of reported issues, incidents and to follow up with the Authority’s appointed contractors, stakeholders and business users to ensure timely escalation where required and completion and closure of the issues or incident; and

p) Ensure that the deliveries of the project by the Authority’s appointed contractors are compliant with relevant policies and guidelines and to identify and close any compliance gaps.

2. The Three (3) Onshore IT System/Business Analysts proposed by the Contractor shall have at least 3 years of IT experience and the following qualifications and experiences:

a) Bachelor’s degree in Computer Science, Information/ Infocom Technology, or related discipline would be preferred;

b) Strong knowledge in application support and maintenance and possesses hands-on’ knowledge and experience in end-to-end Software Development Life Cycle;

c) Experience in IT project implementation, specifically on user requirements gathering, IT business analysis, applic1ation solutioning, UI/UX design and using automated testing software such as Tricentis TOSCA would be an added advantage;

d) Experience in the following would be advantageous:

i. Cloud platform and technology;

ii. Application development using Power builder, Java, Delphi or ASP.Net; and

iii. Government projects.

e) Experience with stakeholder management;

f) Have a positive attitude and good interpersonal skills, able to work and communicate effectively with stakeholders to ensure business needs are met; and

g) Experience in working under minimal supervision and to demonstrate ability to ensure tasks are well completed and project is on schedule.

Responsibilities

1. Perform machine inspection and maintenance.
2. Troubleshoot, repair and/or perform machine and components’ parts overhaul
   1. Able to remove and install machines’ components
   2. Able to evaluate and recommend parts replacement
3. Troubleshoot engine, hydraulic and transmission systems.

Requirements

1. Minimum NITEC / Diploma in Mechanical / Electrical / Automotive Engineering
2. Minimum 5 years’ working experience on construction machinery.
3. Ability to troubleshoot electrical and electronic system will be an added advantage.
4. Basic computer literacy

Job Description:

· Support the Shift Leader in pre-commissioning, commissioning, greenfield start-up planning, punch listing, site walk and equipment inspection.

· Support the Shift Leader in handling start-up, shutdown, daily operation and plant turnaround activities.

· Perform routine production activities such as sample collections, in-process quality testing, plant patrols & data logging, chemical preparations, and loading & unloading of chemicals.

· Perform troubleshooting to resolve operational issues and provide support to technical and maintenance teams.

· Monitor and inspect equipment and instruments and when required, take corrective actions to maintain safe and optimal operation of the process plant.

· Prepare equipment for safe handover to maintenance.

· Read production schedules, shift logs, analytical results and technology team recommendations to determine changes to equipment control and process adjustments.

· Update operating procedures and prepare maintenance package documentation for equipment maintenance activity.

· Perform Permit to Work (PTW) job site risk assessment, and issue PTW to achieve safe work executions.

· Perform emergency response in areas of firefighting, rescue, and loss containment.

· Perform housekeeping in the process area.

· Support efforts to improve profitability, safety, and reliability of facility.

· Provide mentorship to junior technicians.

Requirements:

· NITEC or Higher NITEC in Chemical Process Technology, Chemical Technology or Diploma in Chemical Engineering with 1-3 years of relevant experience in the petrochemicals industry

· Recent graduates with strong academic results but without job experience may be considered too.

· Self-motivated and effective team player with good communication skills

· Basic understanding of industry HSE practices & process safety risks of petrochemical plants

· Proficient in Microsoft Office applications

· Able to perform 12 hours rotating shift work on Jurong Island

KEY DUTIES AND RESPONSIBILITES:

• Perform receipt of incoming raw and packaging materials.
• Maintain and update documents related to Delivery- Acknowledge, Goods Receipt Note along with supporting documents.
• Ensure that materials are kept as per the storage conditions.
• Perform dispensing and sieving of raw materials for production use.
• Perform cleaning of accessories used and the dispensing booth I area after completion of the dispensing / sieving activities.
• Issue packaging materials for packing use.
• To give the planned output dispensing and sieving of raw materials.
• Regularly verify physical stock, review against system stock and identify discrepancies.
• Perform performance checks for the weighing balances as required). Coordinate for calibration / preventive maintenance for all Warehouse equipment and instruments.
• Intimate and follow up with Maintenance department for breakdown rectification of Warehouse equipment.
• To ensure maintenance of Warehouse area and equipment in the state of cleanliness as per SOP.
• Assist in performing routine check and ensure proper cleaning of premises by contract cleaner.
• Assist in investigation in case of any process deviation, non-compliance.
• To carry out preventive and corrective actions for observed non-conformances.
• Assist in installation and qualification of Warehouse equipment.
• Ensure compliance to GxP /Safety/ HSE / Quality policies.
• To coordinate with QC for sampling of raw and packaging materials. Arrange sampling activity and cleaning of sampling booth.
• Any other activities as and when assigned by the Superior.

REQUIREMENT

• Good understanding of safe working practices and cGMP.
• A good team playerwith positive learning attitude.
• Willing to work in Tuas area, in warehouse and dispensing environment.

EDUCATION & EXPERIENCE

• Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Warehouse/ Logistics or relevant disciplines
• Preferably with 3 years' relevant experience in pharmaceutical manufacturing warehouse/ store operation.
• Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

Responsibilities:

- To perform job assignments by selecting, using and maintaining various service tools correctly.

- To perform installation of electrical switches, sensors, transducers, transmitters, current transformers, alternator components, control panels, etc.

- To perform installation of engine wiring as accordance with the drawings provided.

- To disassemble and assemble engine components i.e. oil pump, water pump and cylinder head, etc.

- To perform engine valve lash adjustment.

- To assist and perform mechanical works i.e. installation of radiator assembly, couplings, engines, alternators, gearbox, piping, hoses, etc.

- To assist and perform alignment works for radiator assembly, engine and alternator installation.

- To prepare generators for load test.

- To perform safety devices test and load test including the recording of the required parameter readings.

- To perform ET tool connection onto engine to view diagnostic codes and events and file date.

- To perform troubleshooting on engines and generators when problems arises.

- Knowledge of Hydraulic Staring System, Marine Gearbox, AC Power Alternator, alignment, control panel and testing will of advantage.

- To perform general servicing on engines and alternators.

- IT knowledge will be of advantage.

- Programmable Logic Control knowledge will be of advantage.

Requirements:

- Possess an ITE or equivalent.

- Minimum 5 years of relevant hands-on experience.

- Electrical hands-on experience is a must.

The Early Mental Potential & Wellbeing Research Centre’s mission is to maximise every child’s mental and emotional capital by uplifting neurodevelopmental trajectories during early sensitive periods through interdisciplinary discovery science and translational technologies.

Toward this aim, we engage in 3 major activities and thrusts:

1) Core Discovery Research, Empowering Science: Basic neuroscience research and advanced computational models to understand individual neurocognitive potential, developmental trajectories, and risk and resilience factors;

2) Translation to Clinic & Pedagogy, Empowering Practitioners: Developing precision assessment and intervention tools to optimise parent-child social and mental health within clinical, education and community settings;

3) Translation to Real-World Technologies, Empowering Families: Creating scalable solutions and real-world technologies for parents to enhance their child’s mental and cognitive wellbeing at home.

We are looking for a Project Officer who will support EMPOWER’s Centre Director, Prof Victoria Leong, in providing assistance and managing administrative and operational aspects of the Centre’s various projects.

Key Responsibilities:

• Assist EMPOWER’s Centre Director and project leads in coordinating and managing the Centre’s ongoing projects. This includes tracking project timelines, deliverables, and milestones to ensure they are met on schedule.
• Provide daily administrative support for projects, including coordinating meeting schedules, preparing agendas, and taking minutes to ensure smooth project execution.
• Assist in following up on outstanding invoices and payments to ensure timely processing.
• Provide support in managing the Institutional Review Board (IRB) process, including tracking submissions, maintaining records, and ensuring compliance with ethical review procedures.
• Help prepare project reports, presentations, and other documentation for stakeholders as needed.
• Be proactive in learning and using various online tools and project management systems. Assist in setting up and maintaining these systems for tracking and reporting project progress.
• Ensure that all records are stored and organised systematically for easy retrieval when needed or for specific purposes.
• Help coordinate logistics for project-related events, workshops, and meetings.

Job Requirements:

• A strong Bachelor’s degree in Business Administration, Psychology or IT/Computing (non-exhaustive). Fresh graduates are welcome to apply.
• Demonstrates experience in project management, ideally with a background in local universities.
• Experience working with local & international collaborators or partners in a research or commercial context.
• Demonstrates strong organisational skills to manage multiple projects efficiently. Excellent attention to detail and a proven track record of keeping accurate records.
• Familiarity with Microsoft Office Suite (Excel, PowerPoint, Word) and experience with meeting scheduling software (e.g., Outlook, Zoom, Teams).
• Excellent written and verbal communication skills, with the ability to clearly convey information and interact with diverse stakeholders.
• Ability to quickly learn and adapt to new online systems, tools, and technologies relevant to project management.
• Collaborative mindset with the ability to work effectively within a team environment while also being able to work independently when needed.
• Experience in project coordination or administrative support in a research and academic setting is a plus.
• Interest in neuroscience or psychology research, and working with children, would be an advantage.

Candidates with a proven track-record in one or more of these areas / Fresh graduates are welcome to apply.

We will begin reviewing applications from Dec2024/Jan2025 onwards, until the position is filled, and regret to inform that only shortlisted candidates will be notified.

We are seeking a skilled Product Owner/Business Analyst to advance digital transformation projects for Singaporean government agencies!

• Join a team that utilizes technology to contribute to significant government projects, enhancing the daily lives of Singaporeans.
• Supportive working environment that fosters continuous learning and growth.
• Attractive salary package and comprehensive benefits provided.

Responsibilities:

• Elicit and manage the stakeholder’s business requirements and translate them into detailed requirements documents, including user stories, use cases, and functional specifications.
• Work with technical teams to design solutions that meet business needs while considering system limitations and technical constraints.
• Work closely with UX designers to plan and organize research activities such as product conceptualization workshops and Usability Testing.
• Work with Quality Engineer and business users to plan for UAT, coordinate and monitor progress and acceptance of UAT, and manage defects as needed.
• Organize the product backlog by extensively gathering and analyzing information with stakeholders and participating in crafting Functional/Design specifications.
• Understand the IT management, quality management policy and security guidelines to ensure the development processes and system are designed to comply with these policies.
• Serve as a liaison between business and technical teams, ensuring clear and effective communication throughout the project.
• Proactively identify opportunities for process improvement and recommend solutions to enhance efficiency and effectiveness.

Job Requirements:

• Singaporean only.
• Bachelor’s degree in information technology, or related fields.
• Prior experience of at least 4 years in IT business analysis/developer, designing application solutions, and testing, or related.
• Experience in cloud (Related certification will be an added advantage).
• Prior experience in programming (Java, Python, VB.NET, C#, JavaScript, etc.) is advantageous.
• Experience with low code platform, data analytics, cloud, design thinking and service design will be an added advantage.
• Prior experience in full SDLC / PDLC using Agile methodologies (Related certification will be an added advantage).
• Experience in C3 (Command, Control, Communication), Business Continuity Planning/ System, or Crisis/ Incident Management System

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

Responsibilities

• Configure and manage infrastructure systems, applications, and network equipment (e.g., Active Directory, data centers, firewalls, VPN, video conferencing).
• Oversee desktops, mobile, and remote devices.
• Ensure automated backups, disaster recovery processes, and system patches, with close monitoring of resource usage.
• Work with external vendors to uphold SLAs.
• Develop and update technical documentation (admin and user guides).
• Support local and international users over LAN/WAN securely.
• Identify suitable products, solutions, and suppliers for project needs.
• Provide L1/L2 support and participate in projects as a lead or team member.

Requirements:

• Diploma/Degree in Computer Science, IT, or CCNA Certification.
• At least 1 year of relevant experience.
• Proficient in enterprise networking (WAN, LAN, VPN optimization).
• Skilled in Microsoft Server (2012+), Microsoft 365, Google Suite.
• Knowledgeable in internet architecture (TCP/IP, DNS, DHCP, Proxy, Firewall).
• Familiar with Alcatel PABX, FortiGate, Cisco, and Unifi Wireless AP Controller.
• Strong understanding of CyberRisk and CyberSecurity; PDPA familiarity preferred.
• Experience with Veeam, VMware, and UNIX/Linux is beneficial.
• Background in API/Web Programming and Database Administration is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description & Requirements

ZRG Adventures and Consulting is a specialist attractions consultancy company based in Singapore and we service a wide range of clients who are owners of world class attractions in Singapore and the region. We are looking for resourceful and service oriented individuals to join our growing team. If you enjoy working in an independent and fast paced environment with a keen eye for detail, we have an exciting role for you.

The Go Kart Maintenance Technician will be responsible for the maintenance, repairs, and upkeep of concession Go-Karts under the direction of the Operations Manager and Ride Manager. He / She is required to have a good understanding of electrical components and mechanical systems of a concession Go Kart and be hands on in ensuring that the highest serviceability levels are achieved.

Primary Responsibilities:

• Performing daily safety, mechanical, electrical, and quality assurance checks on the multiple concession Go Karts of the attraction to the highest standards of safety and according to the local and international standards.
• Performing daily safety checks of the track and conducting repairs to safety critical equipment / infrastructure as required to maintain track serviceability.
• Troubleshooting on-the-spot problems and repair requirements as per the manufacturer’s recommendations.
• Assisting with overall attraction maintenance, rebuilds, or enhancement works as required.
• Inspecting and performing minor repairs of all attraction equipment, safety gear, and track elements.
• Have excellent communication skills, able to work unassisted, and have excellent problem-solving abilities to meet customer needs.
• Full training will be given in all areas of the role.
• Assisting the Operations Manager / Ride Manager with the attraction operations.

Desired Qualifications:

• Applicants must be mechanically inclined with the proven ability to troubleshoot mechanical problems and have experience utilising basic hand tools and special repair equipment in the workplace.
• Previous experience with mechanics such as hydraulic disc brakes, precision measuring tools, and electrical equipment components will be an advantage.
• Previous mechanical or repair experience with DC electronics, Go Karts, or similar equipment (buggy, go-karts, car repairs, powered bikes, off-road vehicles, etc.) is a definite asset for the role.
• The ability to work independently as well as take direction from the Operations Manager / Ride Manager.
• Problem-solving skills, with great attention to safety procedures and protocols.
• Excellent communication and interpersonal skills and the ability to work independently and as part of a team.
• Must be able to work with a variety of environmental factors, including heat, noise, and flashing lights, and must be able to lift up to 30 kgs.

Terms of Employment:

• This is a full-time position that requires flexible availability for days, evenings, weekends, and holidays on a varied and rotational schedule.

Responsibilities

• Prepare polymer additives for production usage.
• Carry out lab evaluation of finished products using testing equipment.
• Quality checks on finished products as well as production samples.
• Ensure proper documentations of results, equipment and consumables.
• Ensure proper sample management according to SOPs.
• Prepare test reports/Certificate of Analysis.
• Carry out safety and housekeeping activities in the department.
• Any other duties as and when required to be done by Quality Manager.

Requirements

• Possess at least ITE/Diploma in Chemical Process Technology, Chemistry Chemical Engineering, Science & Technology, Polymer Science or equivalent.
• Fresh graduates are welcomed. Preferably 1 to 2 years of relevant experience in lab testing/chemical/ petrochemical industry.
• On-the-job training will be provided.
• Keen to learn and responsible.
• Good interpersonal and communication skills.
• Team player.
• Meticulous with an eye for accuracy.
• Proficient in MS Office.

Senior Machinery Technician

• Able to work under stress situation
• Good team player
• Perform regular maintenance on equipment used in the construction project
• Preferably at least 5 years experience on truck Euro 2 - Euro 5 Diesel Engine on majority brand chassis
• Basic knowledge of hydraulic system and hydraulic pump
• Conduct inspection regularly on the machinery/equipment to ensure a smooth operation process.
• Carry out routine servicing of equipment as part of a measure to prevent breakdowns and malfunction, which could thwart operation activities.
• Install, assemble and test new machines and equipment
• Carry out mechanical and basic electrical troubleshooting and repair of machinery
• Ensuring repairs, installations, and preventive maintenance on equipment are completed on time and safety
• Perform any other duties as assigned by the Manager
• Required to go construction site and work overtime if necessary

Your Role:

- Receive, store and issue machine tools from/to operators

- Responsible for Tool Inventory management (monitoring and request to order cutters/tools/holder), storage of jig & fixtures

- Upkeep and maintenance of tools

- Tool balancing (calibration)

Requirements:

- CNC Machining background

- Knowledge of tooling and cutter used in precision machining

- Knowledge in interpreting basic mechanical drawing

- Basic MS Excel knowledge

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Job Description:

Environment, Health and Safety (EHS)

• Comply to Veolia Life Saving Rules while performing work inside company premises.
• Effectively participate and contribute in company EHS programmes and initiatives.
• Comply to all EHS procedure (SOP) and work process such as Lock Out Tag Out (LOTO) Procedure, Permit to Work (PTW) Procedure, Work at Height (WAH) Procedure, Confined Space (CS) Entrance Procedure, Hot Work Procedure and etc.
• Comply in reporting and highlighting any plant EHS/Process incident or near misses.
• Comply with company training requirements.
• Participate as team members in Risk Assessment (RA) development, Management of Change (MOC) implementation and Pre-StartUp Safety Review (PSSR) activity.
• Responsible for ensuring the plant, work station, control room and individual locker cabinet is maintained in good housekeeping conditions and comply with company 5S procedure.

Emergency Response

• Attend fire fighting training and be part of the Company Emergency Response Team (CERT).
• Participate in company emergency drills and response exercises.
• Be familiar in terms of function and operational of the company fire fighting system and safety gear (Including SCBA and Bunker Coat).

Operational

• Responsible for operating both Hot and Cold DCS consoles which include process monitoring and parameter adjustment in order to achieve production targets without any safety issues or noncompliance.
• Study processing schedules, engineering recommendations, lab analysis results to determine sound changes in process unit control.
• Record and compile DCS operating data for monitoring purposes and take necessary actions if any deviation or abnormalities are observed.
• At a time, go to the site to do site monitoring and observe flame patterns at the incineration unit in order to optimize the production process.
• Coordinate start-up, shut-down and normal operations/maintenance activities with Operation Supervisor and Operation Technician.
• Perform basic calculations for determining process parameters and material balances.
• Responsible for alarm management of the DCS and ESD systems and provide valuable input to manage the process units.
• Highlight to Supervisor on duty in the event of any abnormality which can affect plant production and safety.
• Perform troubleshooting at DCS/field level, resolve operational issues at DCS/field and provide support for the engineering, operation and maintenance team.
• As identified, to ensure and comply with technical competency requirements such as Boiler Attendance or Steam Engineer.
• Provide support for the engineering team on new project initiatives and implementation.
• Participate and proactively contribute in any type of root cause analysis i.e WIR.
• Support any other site activities as delegated by the Operations Supervisor or Operations Manager.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine.
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• Minimum GCE ‘N’ Level certification with minimally of 8 years of relevant work experience
• Experience in ISO-tanker unloading, incineration system, waste heat boiler system, and water treatment operations will be added advantages.
• Certification in Manage Work at Height and Assess Confined Space for Safe Entry and Work is a plus point.
• 2nd grade steam engineer or class 1/2 boiler certificate will be an advantage.
• Certification in fire fighting training, Site Incident Commander (SIC) course and possessing prior experience as a CERT team member is a bonus.
• As identified, be receptive to step up as shift supervisor, in the absence of the shift supervisor.
• Must be prepared to do either in rotating shifts or normal day working hours, overtime, weekends and Public Holidays depending on schedule assigned.
• An effective team player with good communication skills.

Successful candidate will be working in the main office located at 15 Tuas View Circuit, Singapore 636968. Company transport is provided.

Job Highlights

• 5.5 working days
• with OT
• Medical Benefits
• Company Shuttle Bus

Position objective and summary

• To ensure all waste types are properly identified, received, sorted, treated and disposed of within regulatory requirements
• Monitor, plan and organise the waste/wastewater treatment system processing activities
• Submit reports on performance and progress.
• To ensure Evaporator systems running smoothly with pre-set parameters

Main tasks / activities / responsibilities

• To operate the Evaporator systems safely according to protocol, work procedures & SOPs and to advise line supervisor of any abnormality
• Assist with incoming waste management and system & equipment maintenance
• Conduct sampling of treated waste samples as instructed by line Lead
• Work with Line Lead, Operation Manager and Consultants to eliminate any possible bottlenecks in waste treatment procedures
• To ensure company’s treatment procedures are in line with regulatory requirements

Job requirements

• Willingness to communicate & build rapport with team of diverse cultures
• Solid organizational skills, including multi-tasking and time management
• Experience working in EHS and Permit-To-Work system
• Able to work independently
• Willingness to assist on the ground when the need arises
• Able to perform 12hr rotating shift
• Experience in evaporator & process plant supervisory role will be advantageous

Job Description:*

We are seeking a highly skilled and experienced LSA/FFA (Life-Saving Appliances/Fire-Fighting Appliances) Technician to join our team. The ideal candidate will have a minimum of 4 years of hands-on experience in the installation, troubleshooting, and annual maintenance of liferafts, lifeboats, and fire-fighting equipment. A strong understanding of class regulations and SOLAS (Safety of Life at Sea) requirements is essential for success in this role.

*Responsibilities:*

Install, inspect, maintain, and repair various life-saving appliances (LSA) and fire-fighting appliances (FFA) aboard vessels, ensuring compliance with class regulations and SOLAS requirements.

Conduct routine inspections and testing of liferafts, lifeboats, fire extinguishers, fire hoses, and other firefighting equipment according to manufacturer guidelines and regulatory standards.

Perform troubleshooting and diagnosis of equipment malfunctions, identifying and resolving technical issues promptly and effectively.

Conduct annual maintenance and certification of LSA/FFA equipment, adhering to industry best practices and safety protocols.

Keep accurate records of maintenance activities, inspections, and repairs, maintaining detailed documentation for regulatory compliance purposes.

Collaborate with ship crews, marine engineers, and other stakeholders to ensure the safe and reliable operation of life-saving and fire-fighting systems onboard vessels.

Stay updated on the latest industry developments, regulations, and technologies related to LSA/FFA equipment, participating in training programs and workshops as necessary.

*Qualifications:*

Minimum of 4 years of experience as an LSA/FFA Technician or similar role in the maritime industry.

Proficient understanding of class regulations, SOLAS requirements, and other relevant maritime standards.

Strong technical skills with hands-on experience in the installation, maintenance, and repair of liferafts, lifeboats, fire extinguishers, and related equipment.

Excellent troubleshooting abilities, with the capacity to diagnose and resolve equipment malfunctions efficiently.

Detail-oriented with a focus on accuracy and compliance with safety standards and procedures.

Effective communication skills, with the ability to collaborate with diverse teams and communicate technical information clearly and concisely.

Flexibility to work in challenging maritime environments and willingness to travel as needed.

Relevant certifications or training in LSA/FFA maintenance and inspection preferred.

Join our team and play a vital role in ensuring the safety and security of maritime operations by maintaining high-quality life-saving and fire-fighting equipment onboard vessels. If you meet the qualifications and are ready to contribute your expertise to our dynamic team, we encourage you to apply.

Description

• $2600 - $3200
• 5.5 Days work
• 8am to 5pm, 8am to 12pm
• AWS + VB
• Shipbuilding Industry

Responsibilities:

• Perform inspections, troubleshooting, and maintenance on a variety of marine equipment
• Diagnose and repair mechanical, electrical, and electronic issues
• Maintain detailed records and documentation
• Installs and repairs wiring, fixtures, and equipment for all electrical services aboard ship and in shipyard facilities

Requirements:

• Diploma in Electrical or similar
• At least 1 year working experience in electrical repairs and maintenance
• Candidate possess LEW certificate with EMA or hold a valid Licensed Electrical Worker (LEW) certification is an added advantage

Interested applicants, kindly send your updated resume to +65 8288 5668 or Email to "[email protected]"

We regret that only shortlisted candidates will be notified.

EA Reg. No: R1880058 | Dylan

EA License No: 15C7752