Job Responsibilities:

• Prepare gas production figures and charts for analysis and archive.
• Keep track of utilities consumption in Senoko Gasworks.
• Responsible for the proper and efficient operation of gas making plants and its ancillaries.
• Attend to faults and breakdowns on gas making plants and their ancillaries.
• Attend to matters relating to production, quality control, storage and distribution of town gas from the gasworks.
• Initiate and liaise with maintenance supervisor or contractors to conduct repair or servicing work for the plants and ancillaries.
• Ensure there is proper observance of all safety regulations and that all works done by personnel under his charge comply with the Workplace Safety and Health Act, the Company’s safety and operation manuals and other relevant local regulations.

Pre-requisites:

• Diploma in Mechanical / Chemical/ Electrical Engineering .
• At least 2 years of relevant working experience, preferably in an oil & gas industry or in a petrochemical plant environment.
• Ability to work independently as well as in a team.
• Possess good interpersonal and communications skills.

Work schedule: 3-shift cycle

Job descriptions:

• Carrying out maintenance, repairing and servicing tasks on ACMV system including BMS, chilled water system, FCU, AHU and mechanical ventilation system
• To carry out preventive / breakdown and corrective maintenance
• Attend to defects, complains and requests promptly
• Perform day to day inspection and logging of all facility systems
• Provide technical advice and assistance on all maintenance and breakdown function
• Capable of installing new systems, duct work and testing of ACMV systems will be an added advantage

Requirements:

• 2 years and above in ACMV Facilities Management
• Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, any field

Job Responsibilities

• Attend to reported gas incidents and gas supply abnormalities such as gas fires, poor gas supply pressure, suspected gas leaks, etc.
• Perform site investigations and rectification work inclusive of co-ordination work with the relevant authorities (e.g. SPPG, SCDF, HDB, EMA) and other external agencies and submission of reports.
• Attend to customer service requests, e.g. install/ replace/ trouble-shoot gas appliances, perform servicing of gas stoves, carry out soundness tests on gas installations, etc.
• Handle customers’ enquiries/ feedback and perform service recoveries.
• Investigate and report on matters related to meter readings abnormality.
• Attend to meter cut-off and account due related matters.
• Any other duties as assigned by supervisor, which may include driving company vehicle to attend to work arrangements.

Requirements:

• Diploma/Nitec in Mechanical or any Engineering discipline.
• Relevant work experience and technical knowledge in gas, plumbing, sanitary, or electrical systems will be an advantage.
• Able to work independently and as a team player.
• Possess good interpersonal and communication skills, with experience in contract management and customer service.
• Possess a driving license (class 2 & 3), preferably with access to personal transport.

Roles & Responsibilities:

· Ensure all projects, preventive maintenance works and SOPs are carried out timely and according to planned schedule as per the agreed Response, Delivery and Completion Time.

· Manage subcontractors or parties engaged by Client for the Facility Management Services in various specific disciplines.

· Effectively maintain the respective systems.

· Able to read technical/architectural drawings and diagrams

· Troubleshooting and repair for building related issues eg tiles crack, leaking, paint peel, collapsed false ceiling, wall cracks, door lock faulty, hinges faulty, door faulty, floor finishes, tap leaking, pipe burst, sensor faulty, floor trap choke and etc

· Support and assist in all projects (install, resolve, repair, trouble-shoot) etc.

· Attend to site show rounds conducted.

· Ensure that all his technical team and direct contractor appointed or Contractor’s subcontractors follow Client’s QEHS ISO requirements and Statutory Requirements.

· Undertake any other related duties stipulated.

· Install and test new products, as well as demonstration to clients on the use and maintenance of installed equipment

· Able to write service reports after job completion

Job Requirements:

· Higher Nitec or Nitec with minimum 5 years relevant experience or National Certificate NTC 2 from Institute of Education or Construction Industry Training Institute CITI high certificate with minimum 3 years relating to building and building services maintenance , relevant experience or equivalent;

· All technicians shall have general competency in the use of computer, Outlook emails and the following application Software; MS office, especially MS Outlook express, Microsoft Excel (intermediate level), MS Word and MS Power point.

· Honest and committed individual

· Able to commit within a short notice

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

Job Description :

• Participate in the implementation of SAP EWM, including system configuration, testing, and deployment.
• Work closely with SAP/EWM teams to understand business requirements and translate them into SAP EWM solutions.
• Assist in the configuration and customization of SAP EWM to meet business needs.
• Collaborate with the IT team to ensure proper integration with other SAP modules and external systems.
• Provide support for SAP EWM system users, troubleshooting issues, and resolving problems in a timely manner.
• Monitor system performance and conduct regular maintenance activities to ensure optimal functionality.
• Conduct training sessions for end-users on SAP EWM functionalities and processes.
• Create and maintain documentation for SAP EWM system processes and procedures.
• Work closely with cross-functional teams, business analysts, and stakeholders to gather requirements and align system solutions with business goals.
• Communicate effectively with team members and stakeholders to ensure a smooth flow of information and project updates.
• Propose and implement improvements to enhance the efficiency and effectiveness of the SAP EWM system.
• Participate in system testing, including unit testing, integration testing, and user acceptance testing.

Qualifications:

• Diploma/Bachelor's degree in Information Technology, Computer Science, or a related field.
• At least one year experience in SAP.
• Training will be provided for fresh grad
• Strong analytical and problem-solving skills.
• Good communication and interpersonal skills.
• Ability to work collaboratively in a team environment.
• Eagerness to learn and adapt to new technologies and methodologies.

Responsibilities

• Able to conduct testing of low-voltage switchboards and power distribution boards.
• Able to complete test reports while testing the low-voltage switchboards and power distribution boards.
• To participates and conducts factory acceptance tests / factory witness tests with the presence of clients in accordance to the method of statement.
• To perform in-house test procedures in accordance with the method of statement.
• To perform in-house quality control procedures and checklists e.g., visual inspection, torque tests etc.
• To report the status of calibration, defect reports, replacement procedures, all relevant tools and equipment used by the Testing Department to the Electrical Test Engineer / Quality Engineer.

Requirements

• NITEC and above in Electrical Engineering, Electrical & Electronic Engineering or Mechatronic Engineering.
• Proficient in Microsoft Office tools e.g., Outlook, Teams, Word, Excel
• Able to interpret electrical schematic, single line diagram.
• Experienced in handling tools and equipment used in electrical testing, e.g., Primary Current Injection, Test Set, Secondary Current Injection Test Set, Digital Micro-Ohm Meter, Insulation Resistance Test Set, Dielectric Withstand Test Set.
• Minimum 3 years of relevant working experience.

Roles & Responsibilities

• Assist in liquid transfer and equipment maintenance
• Carry out nitrogen purging and other jobs at customer sites and offshore
• ISO tanks on hire/off hire inspection at yard
• To assist Manager in Company related activities
• Assist in the preparation of Risk Assessments
• Maintain workshop housekeeping
• Any other operations duties assigned to you from time to time

Requirements

• Availability for 5.5 workdays per week
• Willing to work shift during project execution
• Ability to prioritize responsibilities and multi-task
• Preferred hands-on experience

Benefits

• Annual Wage Supplement ( AWS )
• Variable Bonus
• Outpatient medical
• PTO
• Overtime

Job Description:

• Troubleshoot IT issues, provide technical support, and supervise activities related to IT infrastructure, including Network, firewall, backups, and email system.

• Manage administrative tasks within Business systems such as Production and E-commerce systems.

• Develop scripts/solutions to optimize productivity and efficiency.

• Ensure compliance with IT security and privacy regulations through monitoring and support.

• Maintain accurate documentation and oversee the management of IT assets.

• Perform additional duties as assigned by the Manager.

Requirements:

• Diploma in an IT-related field (e.g., Computer Science/Information Systems).

• Preferably 3 years of relevant IT experience; however, fresh graduates are welcome to apply.

• Proficiency in operating systems (Mac OS, MS Windows & Linux), Google Apps platforms, and both wired and wireless networks.

• Familiarity with Imaging software such as Adobe Suite, including Photoshop and Premier.

• Desired knowledge in Python, HTML, and CSS; familiarity with PHP, Java / HTML JavaScript is an advantage.

• Excellent communication and interpersonal skills.

Job Description & Requirements

1. Assembly of factory automation equipments and conveyors.
2. Installation, testing and commissioning of the machines or equipments.
3. Other ad-hoc duties

4. Machines or equipment assembly.

5. Simple troubleshooting

6. Support Mechanical Engineer / Electrical Engineer

Requirements:

1. Secondary level

2. min 2 years related working experiences

- Station on-site and perform daily inspection and preventive maintenance works in Mechanical and Electrical Systems according to Scheduled Maintenance

- Attend to feedback, Breakdown and customer service requests

- Attend to Fault-Calls and carry out rectification of Faults within specified time and budget

- Supervise and coordinate with contractors and vendors on works according to scheduled maintenance, repair, shut-down and overhaul works

- Assist Engineer/Manager to update records of Mechanical and Electrical system servicing reports and monitor the performance of the systems and equipment

- Station on-site and perform daily inspection and preventive maintenance works in Mechanical and Electrical Systems according to Scheduled Maintenance

- Attend to feedback, Breakdown and customer service requests

- Attend to Fault-Calls and carry out rectification of Faults within specified time and budget

- Supervise and coordinate with contractors and vendors on works according to scheduled maintenance, repair, shut-down and overhaul works

- Assist Engineer/Manager to update records of Mechanical and Electrical system servicing reports and monitor the performance of the systems and equipment

- Able to use measuring instrument (example: vernier caliper, micrometer, profile projector etc).

- Require grinding precision to 0.005mm.

- Quality check on pre-form and finished products.

- Able to understand drawing process requirement.

Requirements

· NTC/NITEC Related technical skills certification

· Experience in Precision Engineering / Tool Making

· Possess basic proficiency in English

- Station on-site and perform daily inspection and preventive maintenance works in Mechanical and Electrical Systems according to Scheduled Maintenance

- Attend to feedback, Breakdown and customer service requests

- Attend to Fault-Calls and carry out rectification of Faults within specified time and budget

- Supervise and coordinate with contractors and vendors on works according to scheduled maintenance, repair, shut-down and overhaul works

- Assist Engineer/Manager to update records of Mechanical and Electrical system servicing reports and monitor the performance of the systems and equipment

Job Descriptions:

• Full in charge of Machine assembly
• Handling Electrical panel wiring and machine cable routing
• Perform machine testing
• On-site installation & commissioning
• Marine Engines, Generator Sets maintenance, servicing & troubleshooting
• Updating progress of given tasks to department head
• Ensure given tasks complete within given timeline
• Liaising with suppliers, contractors and customers on site installation job
• Documentations as per ISO and Bizsafe standards
• Maintain workshop cleanliness after daily job

Job Requirements:

• ITE or Diploma in mechanical / electrical / mechatronics engineering
• Trained and / or experienced in Petrol/Diesel Engines or Generator Sets
• 2-3 years’ experience in mechanical engineering
• Positive attitude and willingness to learn
• A strong commitment to all health and safety guidelines
• A problem-solving ability

Position Summary:

As a Production Maintenance Technician, you will provide technical support in a high-volume manufacturing environment. You will perform repair and maintenance of equipment in a manufacturing environment and troubleshoot problems in non-functioning equipment such as optical, mechanical, electrical and fluidic systems. You will need to coach new employees so that they understand their job scopes & responsibilities and ensure that their job performance meet expectations. You will also need to assist engineers in improving equipment uptime and reliability.

Position Responsibilities:

-Complete required training (e.g. cGMP, safety and work instructions, etc.) within a stipulated time frame. ·

-Execute tasks strictly following cGMP, Quality, Safety and Work instruction requirements. ·

-Ensure employees follow safety, quality requirement, and all applicable company policies at all times. ·

-Ensure proper housekeeping and maintain cleanliness (6S) of the working area. ·

-Timely report/ escalate any concerns (work-related or personal). · Meet daily production schedule and performance expectation. ·

-Able to take on additional tasks or responsibilities when required. ·

-Able to follow procedure and perform routine PM schedule with some supervision. ·

-Identify the causes of major faults with equipment and systems and make necessary repairs with direct supervision. ·

-Implement equipment spare parts management activity with broad supervision. ·

-Participate in process improvement team within the same area.

-Implement organization's systems and processes relating to continuous improvement (e.g. 6S) and apply them to the workplace. ·

-Assist in incident investigation. ·

-Able to initiate discussion within team following incident investigation process with some supervision. ·

-Work in a team to ensure good equipment uptime to support operation under board supervision. ·

-Able to coordinate workflow between processes to sustain equipment uptime. -Apply workplace learning techniques to enhance employees' development with board guidance. ·

-Provide feedback on competency-based assessment and workplace learning techniques. ·

-Coordinate training and assessment activities. ·

-Be a role model for co-worker.

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements:

-Basic understanding on Electrical / Electronics / Mechanical / Pneumatic

diagrams.

-Ensure compliance with cGMP, Quality, work safety instructions & practices at all times.

- Complete tasks in a safe and efficient manner.

- High level of discipline and integrity.

- Able to undertake multiple tasks.

- Able to undergo job rotation/ cross training.

- Able to work in noisy environment with appropriate personal protection

equipment (PPE).

- Able to work in chemical environment with appropriate personal protection

equipment (PPE).

- Pass color blindness test without any findings. In Illumina, we handle

components/chemicals with different colors, and it is necessary to be able to

differentiate and identify the correct components/chemicals (using visual) during operation.

- Possess a positive attitude and sense of urgency.

- Meticulous, keen attention to details and organized.

- The candidate must be able to work 12 hours (from 0800 to 2015 for the day shift and from 2000 to 0815 for the night shift) rotating shifts (Monthly rotations from day to night and vice versa) with staggered break times in accordance with the roster.

- Be agreeable to work normal shift when required.

- Able to stay inside the manufacturing floor for most part of the shift (10 hours).

- Able to lift heavy weight safely (e.g. up to 15kg at Reagent Packaging area).

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Preferred Experience/Education/Skills:

- NTC / NITEC Certificate in Electronics or Mechanical Engineering or equivalent.

- Diploma in Electrical, Electronics or Mechanical Engineering will have added advantage.

- 2-4 years of working experience.

- Experience in GMP controlled manufacturing/production environment.

- Preferably with experience in Semiconductor tools like Lithography, Resist Coater, Thin Film or Chemical Mechanical Polishing(CMP).

- Vendor tools Like EVG 150 Coater, EVG Nano Imprint Lithography, Disco Polisher, YES Oven, Ellipsometer, Nanotronics Master QC, Nordson Asher

Responsibilities:

• Maintain and upkeep of all Production equipment & machinery to ensure smooth operation
• Able to work on damaged electrical faults or wiring issues
• Able to repairs to damages, such as door or walls repair
• Any other duties assigned by superior from time to time

Requirements:

• Minimum 2 years hands-on experience
• Preferably with industrial electrical knowledge
• Technical capability and knowledge on M&E services
• Team player with good interpersonal and communication skills
• Organized, responsible and able to multi-task
• 5.5 days week
• Working location: Senoko

Job Responsibilities:

• Carry out maintenance, repair and overhaul work on heavy vehicles (diesel, commercial vehicle, electric and hybrid), ensuring high standard of workmanship and minimize turnaround time for scheduled repairs and inspections to meet workshop’s service standards and according to job order.
• Notify Team Leader of unusual repair problems which will require major repair and replacement parts recommendation.
• Adhere to defined guidelines in regards to safety, orderliness and etc.
• Complete work order for each vehicle and unit serviced.

Job Requirements:

• Candidates must be sound in basic automotive skillset which will be tested during the interview.
• Candidates does not need to have commercial vehicle service or repair experience.

Preferred candidates with:

• Prior experience working on diesel vans and 10 footer trucks but not a must.
• Preferably with Class 3 Driving License but not a must

Job Description

• Perform maintenance of manufacturing machinery
• Troubleshooting of machinery problem
• Perform general servicing of air condition units
• Assist in installation of machinery
• Maintain service & repair log records

Job Requirement

• Preferably NITEC/Technical certificate in engineering field or equivalent
• Minimum 5 years working experience in machinery/aircon maintenance & repair works

Others

• 5 day work week, Monday to Friday
• Willing to work overtime
• Medical & dental benefit provided

Job Description

Reagent QC Technician 1 (RQCT 1) is responsible for executing operational activities including setting up and maintenance of equipment in compliance with cGMP, quality & safety requirements to achieve operational objectives. This role encompasses a broad spectrum of analytical, molecular, and biochemical techniques to evaluate product quality. RQCT 1 is also required to assist in incident investigation and engineering study.

Position Responsibilities:

• Complete required training (e.g. cGMP, safety and work instructions, etc.) within a stipulated time frame
• Ensure proper housekeeping and maintain cleanliness (6S) of the working area.
• Execute tasks strictly following cGMP, Quality, Safety and Work instruction requirements
• Ensure employees follow safety, quality requirement, and all applicable company policies at all times
• Timely report/ escalate any concerns (work-related or personal)
• Able to take on additional tasks or responsibilities when required
• Primary reviewer of batch records for final product release
• Perform daily QC routine tasks (e.g. QC sample collection) under broad guidance
• Conduct analytical, molecular and biochemical analysis for intermediate and final products (reagent samples) under broad guidance
• Prepare reagent samples using basic laboratory equipment in accordance with Work Instruction (WI) under broad guidance
• Able to test prepared reagent samples using different laboratory analytical instruments in accordance with Work Instruction (WI) under broad guidance
• Generate and analyze test results (example: Chromatogram) in accordance with Work Instruction (WI) under broad guidance
• Ensure accurate data generation and entry of records into Manufacturing Execution System (MES) or Laboratory Information Management System (LIMS) under broad guidance
• Perform regular maintenance / inspection of measuring devices and equipment for accuracy under broad guidance
• Perform peer verification to ensure test / inspection process follow Work Instruction (WI) under broad guidance
• Perform basic troubleshooting of common issues and investigation of reagent sample failure (Out of Specification) to determine the root cause and perform immediate corrective actions with some supervision
• Prepare, qualify and track oligos and standards to ensure sufficient and non-expired inventory for sample analysis under broad guidance
• Prepare chemical stock solutions and reagents for analysis under broad guidance
• Ensure inventory records of all control and consumable are updated under broad guidance
• Responsible in procurement, purchasing duties according to inventory records under broad guidance
• Partner with new technician on QC testing processes defined in work instruction(s)
• Improvement work:Participate in process improvement to enhance manufacturing/QC process capabilities in area such as quality and efficiency under broad guidance
  Assist in non-production activities such as engineering studies, NCR investigation runs, validation / PPQ runs under broad guidance
• Participate in incident investigation

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements:

• Good understanding of GDP and cGMP, knowledge of ISO and MDSAP requirements preferred
• Complete tasks in a safe and efficient manner
• High level of discipline and integrity
• Able to undergo job rotation/cross training
• Able to work in noisy environment with appropriate personal protection equipment (PPE)
• Able to work in chemical environment with appropriate personal protection equipment (PPE)
• Must be able to identify different colors for work purposes. In Illumina, we handle components/chemicals with different colors, and it is necessary to be able to differentiate and identify the correct components/chemicals (using visual) during operation.
• Proficient with basic weighing and pipetting skill
• Familiar with basic laboratory procedures. Relevant experience with laboratory testing, QC of molecular-biology-based assays will be an advantage
• Possess a positive attitude and sense of urgency
• Meticulous, keen attention to details and organized.
• Good analytical skills
• The candidate must be able to work 12 hours (from 0800 to 2015 for the day shift and from 2000 to 0815 for the night shift) rotating shifts with staggered break times in accordance with the roster
• Team player and possess effective interpersonal and communication skills.
• Able to lift 15kg or less of heavy weight safely.

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Preferred Experience/Education/Skills:

• Fresh graduate with Diploma in Science (preferably Chemistry or Biology), Chemical Process Technology or related Life Science or Technology.
• Minimum 1 years of operations experience for Secondary School / ‘O’ Level / NTC / NITEC/ Diploma / Non-Science or Non-Engineering Degree or equivalent.
• Hands on experience in sample preparation using basic laboratory equipment such as micropipettes, incubator and mini-centrifuge; Chromatogram analysis for liquid samples preferred
• Hands-on experience and good micro-pipetting skills/techniques using Single channel and/or Multichannel micro-pipettes, including reverse pipetting technique preferred
• Knowledge in handling and preparation of reagents (including enzymes or proteins) preferred
• Experience in ISO 13485, MDSAP, and GMP controlled manufacturing/production environment preferred
• QC experience in a manufacturing environment preferred
• Relevant experience in a manufacturing environment working with standard production control tools – LIMS, MES, ERP, inventory control, work orders preferred

Job Descriptions:

• Full in charge of Machine assembly
• Handling Electrical panel wiring and machine cable routing
• Perform machine testing
• On-site installation & commissioning
• Marine Engines, Generator Sets maintenance, servicing & troubleshooting
• Updating progress of given tasks to department head
• Ensure given tasks complete within given timeline
• Liaising with suppliers, contractors and customers on site installation job
• Documentations as per ISO and Bizsafe standards
• Maintain workshop cleanliness after daily job

Job Requirements:

• ITE or Diploma in mechanical / electrical / mechatronics engineering
• Trained and / or experienced in Petrol/Diesel Engines or Generator Sets
• 2-3 years’ experience in mechanical engineering
• Positive attitude and willingness to learn
• A strong commitment to all health and safety guidelines
• A problem-solving ability

Job Summary

Calibration Technician for this role supports the calibration process on Pressure, Temperature & Humidity.

Job Description

1. Perform calibration for instruments related to Pressure, Temperature & Humidty in the laboratory or client site.
2. Maintain and upkeep the laboratory to ensure the best conditions operationally and meet the regulatory requirements.
3. Maintain detail documentation for the calibration program.
4. Ensure the calibration processes and procedures meet the required specifications and maintain compliance with relevant standards.
5. Issue calibration reports/certificates.
6. Other ad-hoc work as and when required.

Job Requirement

• Preferably with NITEC / Diploma in Engineering
• Computer-literate
• With strong hands-on technical skills or willing to hands-on on electrical and instrumentation devices
• Compliance and Standards: Adhere to industry standards, regulations, and quality management systems
• Perform work duties according to ISO17025 requirements
• No experience candidate is welcome and on job training will be provided

Job Summary

Calibration Technician for this role supports the calibration process on Electrical area.

Job Description

1. Perform calibration for test and measurement instruments such as signal generator, function generator, Transponder/DME/TCAS Flight Line Test Set etc.,
2. Working together with the team to maintain and keep the laboratory to ensure the best conditions operationally and meet the regulatory requirements.
3. Maintain detail documentation for the calibration program.
4. Ensure the calibration processes and procedures meet the required specifications and maintain compliance with relevant standards.
5. Issue calibration reports/certificates.
6. Other ad-hoc work as and when required

Job Requirement

• Preferably with NITEC / Diploma in Telecommunications, or Electronics Engineering
• Computer-literate
• With strong hands-on technical skills or willing to hands-on on electrical and instrumentation devices
• Compliance and Standards: Adhere to industry standards, regulations, and quality management systems
• Perform work duties according to ISO17025 requirements
• No experience candidate is welcome and on job training will be provided

Job Responsibilities:

• Responsible for the operation and maintenance of the demineralized and wastewater treatment plants.
• Perform quality analysis of water, gas and other laboratory investigation to gas making plants and ancillaries.
• Monitor odorant level of manufactured gas and handle the storage and topping-up of odorant.
• Maintain chemical inventories.
• Maintain and update all documents required for lab and demineralized plant operations and submission to Authorities.
• Conduct gas making plants performance check to verify the plants efficiency yearly.
• Administer the required contracts for lab and demineralized plat operations.
• Ensure that staff are aware of hazards associated with their work and apply appropriate risk control.
• Report all accidents and dangerous occurrences promptly to the Head of Supply Branch.
• Assist the safety personnel to investigate serious accidents and dangerous occurrences.

Pre-requisites:

• Diploma/Nitec in Chemistry/Chemical Engineering/Chemical Process Technology.
• Preferably 2 years of relevant working experience in an oil & gas industry or in a petrochemical plant environment.
• Ability to work independently as well as in a team.
• Possess good interpersonal and communications skills.
• Strictly required to work office hours/on shift/ standby duties as assigned by supervisor.

RESPONSIBILITIES

- Responsible for troubleshooting faults related to all facilities and infrastructure,

mechanical and electrical equipment, infrastructure, system engineering, plumbing

and sanitary.

- Perform routine inspection and maintenance work.

- Supervise vendors / contractors work on site, respond to emergency and crisis situation as and when needed. Assist in managing inventory control of company assets, equipment, instrument, and tools.

- Check for defects, malfunction, damage office fittings, equipment, and furniture.

- Assist with receiving, recording, sorting, packing, storing and distributing donated

items, if necessary

- Any other duties as assigned by the designated Supervisor (Facilities), including

counter duties for visitor management system and screening of visitors.

- Physical manning of fire command centre during the shift work.

REQUIREMENTS

- Min Higher Nitec in building maintenance / electrical / mechanical engineering

- At least 3 years of working experience in facilities management operations, M&E works and related field of building service.