FM Technician Job Responsibilities

1. Conduct preventive maintenance and regular inspections of installations, fixtures and fittings, equipment, common facilities and property to ensure they are clean, safe and in good working condition.
2. Undertake minor building, mechanical and electrical repair works, and handyman works (such as changing of light bulbs, reset drawer locks, etc).
3. Monitor and attend to maintenance service requests, investigate and initiate corrective actions for any service and equipment breakdown, or fault detected during routine check, servicing and maintenance.
4. Daily, weekly and monthly inspection of key facilities, systems and critical areas.
5. Coordinate and supervise the rectification of defects, maintenance, replacement and upgrading works carried out by contractors.
6. Supervise contractors/vendors performing maintenance works on building facilities (e.g. Building maintenance, Mechanical & Electrical systems (M&E), horticulture, cleaning, pest control etc).
7. Monitor utilities consumption by taking water and electricity meter readings and report out of normal consumptions.
8. Assist in fire safety management, emergencies and business continuity plan for the Authority’s premise.
9. Liaise with Authority’s employees on projects and maintenance works and ensure compliance with fire, health and safety standards.
10. Coordinate and work with audio and visual equipment and cleaning contractors to set up meeting venues including seating arrangements and equipment.
11. Update information databases and breakdown record for engineering systems.
12. Any other facilities management works or related works that arise from the building operations and need.

Job Qualifications

1. At least three (3) years’ relevant experience in building operation and maintenance of building facilities.
2. The technicians shall hold minimum a NITEC/Higher NITEC in Facility Management or Mechanical and Electrical Services or equivalent.
3. Additional experience in electrical system, uninterruptible power supply, generators, FM200, fire alarm, sprinkler, high voltage and low voltage switchboards will be an advantage.
4. Additional qualifications such as Electrical Worker License/Singapore Certified Energy Manager (Associate)/Green Mark Facilities Manager will be an added advantage.

FM Technician Job Responsibilities

1. Conduct preventive maintenance and regular inspections of installations, fixtures and fittings, equipment, common facilities and property to ensure they are clean, safe and in good working condition.
2. Undertake minor building, mechanical and electrical repair works, and handyman works (such as changing of light bulbs, reset drawer locks, etc).
3. Monitor and attend to maintenance service requests, investigate and initiate corrective actions for any service and equipment breakdown, or fault detected during routine check, servicing and maintenance.
4. Daily, weekly and monthly inspection of key facilities, systems and critical areas.
5. Coordinate and supervise the rectification of defects, maintenance, replacement and upgrading works carried out by contractors.
6. Supervise contractors/vendors performing maintenance works on building facilities (e.g. Building maintenance, Mechanical & Electrical systems (M&E), horticulture, cleaning, pest control etc).
7. Monitor utilities consumption by taking water and electricity meter readings and report out of normal consumptions.
8. Assist in fire safety management, emergencies and business continuity plan for the Authority’s premise.
9. Liaise with Authority’s employees on projects and maintenance works and ensure compliance with fire, health and safety standards.
10. Coordinate and work with audio and visual equipment and cleaning contractors to set up meeting venues including seating arrangements and equipment.
11. Update information databases and breakdown record for engineering systems.
12. Any other facilities management works or related works that arise from the building operations and need.

Job Qualifications

1. At least three (3) years’ relevant experience in building operation and maintenance of building facilities.
2. The technicians shall hold minimum a NITEC/Higher NITEC in Facility Management or Mechanical and Electrical Services or equivalent.
3. Additional experience in electrical system, uninterruptible power supply, generators, FM200, fire alarm, sprinkler, high voltage and low voltage switchboards will be an advantage.
4. Additional qualifications such as Electrical Worker License/Singapore Certified Energy Manager (Associate)/Green Mark Facilities Manager will be an added advantage.

Technician Responsibilities:

• Diagnose, troubleshoot and repair mobile devices;

• Quality control and testing of repaired devices to ensure full functionality. Resolve/manage customer inquiries;

• Able to interact positively with customers at the storefront and over the phone;

• Ability to multi-task between repairs and customer service;

• Other related duties as required;

• Maintain and use repair tools and equipment. Including software and in-store POS system to track repair tickets and inventory;

• Strategically plan the order of operations to ensure a successful repair;

• Provide estimates and quotes;

• Glass only replacement on Samsung and iPads;

• Microscopic Board work; component replacement Hand-solder SMT components,

• remove and replace thru-hole comp without board damage,

• solder wires and cables,

• Diagnosis, troubleshoot and repair mobile devices;

• identify assembly and documents issues;

• Repair logic board issues from water damage.

Requirements:

• Excellent knowledge of customer service best practice with previous experience;

• Ability to repair a variety of mobile devices (i.e., iPhone, Samsung, LG, Motorola, Sony, Huawei and OnePlus phone, and iPads.);

• Ability to communicate effectively with a wide variety of people in a professional manner, face to face, on the telephone and in writing;

• Knowledge of mobile devices including manufacturers, operating systems, and network service providers;

• Willing to work flexibly and with enthusiasm;

• Excellent organizational skills;

• Good attention to detail and ability to show initiative;

• Ability to demonstrate practical troubleshooting and problem analysis techniques;

• Ability to plan and prioritize your workload without supervision

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Service Technician/Technician
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $2600 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Perform maintenance and repair tasks on various electrical and electronic systems, both outdoors and within the company workshop.
• Troubleshoot issues effectively to ensure minimal downtime.
• All other assigned duties.

APPLY NOW!!!

• Minimum Professional Certificate/NiTEC (Electrical & Electronic Engineering / Electrical Engineering).
• At least one year of experience in customer support and repair of forklifts, automobiles, and heavy industrial equipment.
• Must have knowledge of AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65053 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Healthcare / Medical (Dental Laboratory)
• Position Title: Dental Technician
• Working Location: Ubi
• Working Hours: 5.5 days (Monday – Friday 8.30 AM to 5.30 PM, Saturday 8.30 AM to 12.30 PM)
• Salary Package: Basic Salary up to $2,300 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Read and interpret doctors’ prescriptions.
• Download digital scans and upload files for fabrication.
• Operate CAD/CAM equipment such as milling machines.
• Create and perfect models from dental impressions.
• Build and repair dental prostheses such as crowns, bridges, onlays, and veneers, using both traditional and digital methods.
• Personalize dental prostheses to fit and function correctly according to the prescription.
• Ensure all products meet quality standards before delivery.
• Work closely with team members, dentists, and dental partners to achieve the best results for patients.
• Manage and order dental materials and equipment.
• Maintain equipment, arrange for servicing and repairs when needed.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum GCE O Level, NITEC or equivalent
• Prior experience in a dental laboratory is an added advantage
• Competent with computer and smartphone applications/software

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67110 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Well Established Company

• Working location at Woodlands, Senoko

• Working hour: Monday - Friday (8am - 5pm) & Saturday (8am – 12pm)

• Variable Bonus + Excellent Welfare & Benefits

Job Scope

• Servicing, installation, testing and troubleshooting of electrical and mechanical parts at clients' premises or workshop.
• Access control, able to work under minimal supervision.
• Other task that assigns by the management.

Requirement

• NITEC / Professional Certificate in Electrical / Electronic / Mechanical or equivalent.
• 1 - 2 years of relevant working experience
• Possess Class 3 License is an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

SIM BEI NA (R22111637)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• MNC (Woodlands)
• Company Transport Provided
• Basic: $1800 to $2500 + AWS + VB (3 to 4 months)
• Excellent Benefits + Career Progression
• Training Provided for candidate without or with lesser experience

Job Responsibilities:

• General maintenance, equipment repair and overhaul plant equipment / instrument.
• Carry out minor fabrication work (piping, support system, vessel, electrical supply, lighting system).
• Maintain good housekeeping and 5S in the work area.
• Assist in plant troubleshooting job.
• Comply to all risk control measures and adhere to safe work procedure according to WSH (Risk Management) requirements while performing assigned work duties.
• Operate processes in accordance to operating procedures, process safety information (where applicable) and safe work practices.
• Participate in relevant safety and health programs, trainings and initiatives.
• Report on safety and health incidents and accidents.
• Any assigned ad-hop task/s.

Requirements:

• Preferably 2 to 3 years’ experience in a process manufacturing environment.
• Basic Education Requirements: Minimum NTC-3 in Welding/Maintenance Fitting or Electrical fitting and Installation or other relevant technical certificate.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Production Technician (Gul / Shift / Allowance / Fast Hire)

The Role:

• Perform all assembly / injection related operations and secondary processes
• Perform basic housekeeping to maintain safe work station
• Utilize work tools to check and perform all assembly processes
• Check for defects and perform re-work when required
• Report to leader and assistant leader

Benefits:

• Working hours can choose
• 4 Days: Mon - Thurs, 645am - 645pm (With $7/day allowance) OR
• 4 Days: Mon - Thurs, 645pm - 645am (With $15.50/night allowance) OR
• 5 days: Mon - Fri, 815am - 530pm (No allowance)
• Salary: $1700 - $1900

Location:

• Gul (Walking distance from Gul MRT)

Please submit your updated resume in MS Word format by clicking the QUICK APPLY button.

For FAST response, whatsapp to 6038 0508, with the following information:

1) Your Name
2) Your staying location
3) Your availability to start work

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Sng Shoo Woon

Registration Number: R1110625
AlwaysHired Pte Ltd
EA Licence No: 24C2293

• Assist of BIM manager for Tender document creation, coordination with different trades and team work.
• Assist BIM manager for IDD implementation.
• Responsible for the preparation of project drafting plan and deliverables with project engineer
• Familiar with BIM execution plan, requirements, process and workflow.
• Manage the drafting resources to meet the project timelines
• Develop drafting standard and procedures
• Develop team performance through capability development and specific/constructive feedback

Qualifications

• Bachelors’ degree in Architecture, Engineering or Construction Technology, with minimum 5 years of relevant professional experience.
• Industry BIM Certification (Revit Professional, BCA BIM courses) is preferred.
• Proficient with BIM, REVIT, AutoCAD, Naviswork, Microstation, etc.
• Excellent written & spoken communication skills in English.

About our client: Our client is the in the oil&Gas industry.

About the role:

• Conduct and perform general equipment testing, maintenance, and repair work
• Execute tasks/activities, standard maintenance, and repair work such as Preventive, Corrective maintenance project executions at the site effectively & efficiently
• Ensure all site executions are performed in accordance with all maintenance work procedures / OEM manuals/company standards to ensure site quality, asset integrity and operability
• Ensure all site executions are performed in accordance with all Local Statutory and Company Safety processes to achieve good safety records/results
• Report any problems or issues with site facilities
• Process Permit-to-Work, Job Safety Analysis (JSA), Lock-out, Tag-out (LOTO) or execute the Defeat of Safety Critical Equipment (DOSCE) during associate maintenance activities
• Participate and contribute to maintenance documentation reviews such as Safe Work Procedures (SWP), Job Safety Analysis (JSA), and What-If Analysis
• Maintain work progress status and report to Supervisors on a daily or ad-hoc basis
• Perform Work Executor in the Computerized Maintenance Management System (CMMS) workflow to receive, update and close up assigned Work Orders and checklist
• Supervise contractors in work order execution and mentor, and guide technicians/junior technicians
• Support the Maintenance Supervisor in ensuring that contractors or third-party vendors execute maintenance tasks/activities at the site effectively and efficiently
• Ensure that contractors carry out tasks/activities that adhered to safety, health, and environmental regulations and company standards
• Assist Maintenance Supervisor/Engineer with Capex project execution
• Help out in the supervision of Capex project execution
• Perform equipment or system testing/commissioning / Inspections / Pre-Startup Safety Review (PSSR) to properly handover to the Operations team after maintenance/project completion
• Participate in routine safety drills, work orders, troubleshooting, and failure analysis
• Standby as duty technician for emergency activation to perform corrective maintenance after working hours
• Suggest and execute ideas for continuous improvement in maintenance procedures and processes to improve or optimize maintenance costs, work processes, and safety standards
• Assist to lead equipment training to the Operations dept or new trainees
• Maintain inventory and housekeeping
• Practice good housekeeping
• Assist to maintain spare parts inventory levels, support delivery checks by suppliers, and maintain good preservation/housekeeping in the store

About you:

• ITE or Diploma equivalent in maintenance
• 3 years of relevant maintenance experience in a similar industry
• Familiar with and experience in Maintenance and inspection work
• Familiar with and experience in terminal equipment and assets
• Technically sound
• Familiar with terminal equipment and assets
• Familiar with terminal fire-fighting and emergency procedures
• Knowledge of safety, health and environment regulatory and practices
• Compliance with regulatory requirements

Other:

• Work location: Jurong Island (transport provided at Jurong East)
• Work hours: Monday to Friday (8.30am to 5.30pm)

*Please note that only shortlisted candidates will be contacted.

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

The Network Technician is responsible for installing, amending, and removing unnecessary cablings and other network peripherals. The activities may include but not limited to:

• Install wall-functioning computer networks, connections, and cabling.
• Rack and Dismount Network Device.
• Perform Preventive Maintenance and asset sighting.
• Perform Ocular inspections and regular site visits.
• Ensure tidiness within managed rack and cable organization.
• Perform connectivity test and Physical triage.

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV).

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tac and the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg. <R1988730> <Emily Ng Kim Yin>

JOB SCOPE: INSTALLATION OF AUTOMATIC GATE SYSTEM , VEHICLE BARRIER SYSTEM & ACCESS CONTROL SYSTEM FOR LANDED PROPERTY , CONDOMINIUM , INDUSTRIAL BUILDING & GOVERNMENT PROJECT.

WORK SCOPE REQUIRED TECHNICIAN WITH ELECTRICAL KNOWLEDGE , WELDING KNOWLEDGE AND UNDERSTAND WIRING DIAGRAM ON CONTROL BOARD.

FM Technician Job Responsibilities

1. Conduct preventive maintenance and regular inspections of installations, fixtures and fittings, equipment, common facilities and property to ensure they are clean, safe and in good working condition.
2. Undertake minor building, mechanical and electrical repair works, and handyman works (such as changing of light bulbs, reset drawer locks, etc).
3. Monitor and attend to maintenance service requests, investigate and initiate corrective actions for any service and equipment breakdown, or fault detected during routine check, servicing and maintenance.
4. Daily, weekly and monthly inspection of key facilities, systems and critical areas.
5. Coordinate and supervise the rectification of defects, maintenance, replacement and upgrading works carried out by contractors.
6. Supervise contractors/vendors performing maintenance works on building facilities (e.g. Building maintenance, Mechanical & Electrical systems (M&E), horticulture, cleaning, pest control etc).
7. Monitor utilities consumption by taking water and electricity meter readings and report out of normal consumptions.
8. Assist in fire safety management, emergencies and business continuity plan for the Authority’s premise.
9. Liaise with Authority’s employees on projects and maintenance works and ensure compliance with fire, health and safety standards.
10. Coordinate and work with audio and visual equipment and cleaning contractors to set up meeting venues including seating arrangements and equipment.
11. Update information databases and breakdown record for engineering systems.
12. Any other facilities management works or related works that arise from the building operations and need.

Job Qualifications

1. At least three (3) years’ relevant experience in building operation and maintenance of building facilities.
2. The technicians shall hold minimum a NITEC/Higher NITEC in Facility Management or Mechanical and Electrical Services or equivalent.
3. Additional experience in electrical system, uninterruptible power supply, generators, FM200, fire alarm, sprinkler, high voltage and low voltage switchboards will be an advantage.
4. Additional qualifications such as Electrical Worker License/Singapore Certified Energy Manager (Associate)/Green Mark Facilities Manager will be an added advantage.

☑ Basic $ 2500 - $ 3500

☑ 5 Days (Mon – Fri: 08:30am – 5.30pm)

☑ MacPherson, Island wide travel & Class 3 license needed.

☑ Good Benefits + Career Growth

Key Responsibilities:

• Install, repair, and maintain safes and vaults.
• Manoeuvre safes using hand tools and equipment.
• Install and service mechanical and electronic locks.
• Keep accurate records of all work performed.
• Provide excellent customer service and address client needs.

Qualifications:

• Experience in safe installation/repair; able to handle heavy safes.
• Skilled with tools and locking systems.
• Class 3 driving license needed

Interested applicants are welcome to apply online with updated Resume or email to [email protected]

Only shortlisted candidate will be notified

Yvette Kam Soo Leng

Registration: R22107492

Chemical Technician (Manufacturing/ Pharma/ GMP)

12 Months Contract

Location: Tuas

Up to $2,000 + Shift Allowance

Industry: Pharmaceutical

Our client aims at creating a new manufacturing concept consisting of a new generation of evolutive multi-product facilities, modular, adaptable, and agile, leveraging new disruptive technologies, to better address vaccine business challenges.

Job Purpose

• Operate and monitor the chemical production activities in the plant, ensuring that the product is manufactured within set production schedule and to the required standards of quality in a safe, efficient, responsible and cost-effective manner.

Responsibilities:

• Operate the different streams of the plant for their specific processes.
• Each of these processes comprises the following activities.

1. Handover checks computerised and/or manual.
2. Obtaining, following and completing process related documentation.
3. Pre and post batch cleaning of vessels and lines.
4. Pre batch checks.
5. Charging vessels either manually or via a pump.
6. Post charging checks and taking corrective action where necessary.
7. Adjusting and monitoring process conditions as required to start the process.
8. Monitoring process; both with computer and manually observing temperature, pressure, flow, pH, volume, colour, moisture content and adjusting the parameters accordingly.
9. Carrying out routine sampling and Bulk packing and testing of samples as required.
10. Recognise end point of the reaction and altering process parameter to stop reaction.
11. Transferring product to the next stage.

• Comply with HSE and quality policies and defined procedures. Bring out unsafe conditions and acts / procedures for correction.
• Record all operational and analytical data on the appropriate documents and inform the Shift Supervisor of any process abnormalities.
• Maintain product separation and accurate labelling of all documents, bags and vessels at all times.
• Carry out routine checks and scheduled cleaning procedures including cleanrooms.
• Request and collect raw materials and consumables, observe clean areas procedures, monitor raw materials stock and notify Shift Supervisor for any abnormalities.
• Notify Shift Supervisor of requirements for maintenance. Prepare equipment before maintenance work e.g. depressurizing, cleaning of lines and equipment, de-energizing, LOTO etc.
• Perform basic maintenance of equipment using tools such as TPM.
• At the Shift Supervisor's request, to carry out on-the-job training of other Chemical Technicians, incorporating cGMP and safety procedures.
• To observe cGMP and Health & Safety rules and regulations at work at all times in accordance with Company set standards.
• To be aware of the potentially hazardous nature of the chemicals in the area and must take the appropriate precautions when using them.
• Maintain housekeeping of the plant, daily API cleanrooms cleanings and provide suggestions for improvements.
• To operate ancillary facilities e.g. water system, tank farms, solvent recovery, salt crushing activities etc.

Requirements:

• Minimum NITEC or Higher NITEC in Chemical Processing or related
• Be prepared to work 12-hour shifts and overtime.
• Able to perform manual handling tasks including lifting of materials which are weights up to 25kg.
• Medically fit, and to be part of Company’s firefighter CERT team.
• Able to use process control systems for operation of plant equipment
• Familiar with operation of manufacturing equipment such reactors, centrifuges, filters, dryers etc
• Familiar and able to apply GMP in manufacturing processes
• Able to identify and manage hazards that may occur within biopharmaceutical plant

Lim Pey Chyi - [email protected]

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423

Responsibilities:

• Participate in the requirement study, research, feasibility study, functional analysis and design phases, functional testing, user acceptance testing and end-user training of any new IT software development projects and/ or product development for the eldercare industry.
• Involve in our market-driven product design to strengthen our SaaS care management system.
• Produce Functional Specification, User Story and Functional Test Case.
• Perform technical and business impact analysis for modifications needed in existing web-based SaaS/SOA and bespoke applications to meet changing user requirements.
• Assist in troubleshooting software application and system issues.
• Work with Product Owner, Software Architect, Developers, Project Manager and customers/ end users (e.g. doctors, nurses, clinicians, administrators, IT Manager, etc.) on change requests and enhancements to current system.
• Chance to participate in consulting and proof-of-concept/ pilot and other trailblazing/ meaningful projects.

Requirements:

• Minimum Bachelor's Degree or Diploma, in any field.
• Minimum 3 years of relevant working experience, preferably working as functional consultant, business analyst, system analyst, IT analyst, product analyst, analyst programmer, etc.
• Versatile and independent in picking up new technology, and possess strong logical and analytical problem-solving skills.
• Able to do flowcharting and business process analysis.
• Ability to grasp and understand business requirements.
• Enjoy solving real-world problems, software/SaaS product design and management.
• Good communication and interpersonal skills.
• Proficient with MS Office Applications (i.e. Word, Excel, PowerPoint, Project, Visio, etc)

We regret that only shortlisted candidates will be notified.
Interested applicants kindly click on “apply now” or send your updated resume to [email protected]

Jayden Kua Jing Yu
Registration Number: R24124814
EA License Number: 02C4944
People Profilers Pte Ltd, 20 Cecil St, #08-09, PLUS Building, Singapore 049705
http://www.peopleprofilers.com

JOB FUNCTION

• Responsible for Level 1 & 2 IT Infrastructure support which includes servers, network equipment, backup, network equipment, UPS, servers room equipment.
• The responsibility also includes implementation, patching, installation, and configuration.
• Administering, maintaining, and managing the computer systems - Operating Systems and Communication Systems.
• Maintains documentation regarding security and service records relating to hardware, software, and IT infrastructure.
• Document, track, and monitor issues in timely manner.
• Support and maintain end users account information including rights, security and systems groups.
• Responsible in managing the data integrity, maintenance and ensure daily data is successfully backup and restore when and there needed.
• Manage and update all IT assets records periodically.
• Maintaining and supporting hardware, software, and operating systems which in line with the goals and standards of the corporation and IT department policies. This includes installing and upgrading OS of server hardware and software.
• Conduct periodic maintenance, audit and compliance for servers, UPS, and network equipment.
• Facilitate and liaison with all outsourced vendors for all application remote support and Move-Add-Change requests.
• Ensuring computer and information security by implementing relevant procedures and standards.
• Periodic update all servers, network devices to latest security patches and firmware. Conduct regular or quarterly servers, network, UPS audit and preventive maintenance.
• Adhere to internal Operational Level Agreements (OLAs) and deliverables.
• Any other work assigned by Department Lead.

INTERACTION

Interfaces with end-users, technical support personnel at all environment.

JOB SPECIFICATIONS

A diploma or degree holder preferably in Computer studies, Networking or Communications with at least 5 years working experience in the IT industry. Should be a team player and a reliable, responsible, and diligent person that possesses initiative.

• Min. 2 years hand-on experience in administrating Windows Active Directory, Windows Servers, DNS, Office 365 Admin, MS Azure, and other system related issues.
• Min. 1 years hand-on experience in maintaining and troubleshooting network equipment, VPN, and wireless Access point.
• Min. 1 years hand-on experience in managing and configuration of Hyper-V, Microsoft Authenticator, networking and troubleshooting etc.
• Min. 2 years hand-on experience in Virtualization Technology VMware and Hyper-V.
• ITIL with strong emphasis on Incident Management, Problem Management and Change Management
• Preferably holder of MCSA or MSCE, and/with CCNA, and other Management skills.

Job Summary:

• Basic up to $7500
• AWS + Bonus
• 5 days work
• 2 way transport provided at Tanah Merah MRT

Job Responsibilities:

• Develop and implement IT systems and policies to meet business goals and security standards.
• Lead an IT team and improve efficiency with new technologies.
• Manage vendors and ensure service agreements are met.
• Oversee IT budget and ensure cost efficiency.
• Maintain the Club Management System (CMS) for smooth operation.

Job Requirements:

• Degree in Computer Engineering or equivalent; certifications (CISSP, PMP, MCSE) are a plus.
• At least 3 years of relevant experience.
• Strong leadership and team management abilities.

<< To Apply >>

☎ WhatsApp | 8421 1422

Job Description :

* Work closely with and provide I.T support for OTC (Over the Counter) oil products desk

* Offer L1 technical support to users via phone, remote assistance, and email.

* Manage the escalation, tracking, and resolution of incidents, service requests, and problems professionally and promptly.

* Manage and support organizations’ IT infrastructure, security systems and telephony.

* Develop, implement, and update IT policy, operating procedures with best practices.

* Assess and enhance IT infrastructure solutions to meet business needs.

* Assist with computer and software issues like Microsoft, servers, and security.

* Provide on-site support as required.

* Assist with other administrative tasks when needed.

* Technical Support: Provide technical assistance and support to end-users, both remotely and in-person, to resolve hardware, software, and network-related issues.

* Troubleshooting: Diagnose and resolve technical problems, including but not limited to computer malfunctions, network connectivity issues, and software glitches.

* Hardware and Software Maintenance: Maintain, repair, and upgrade computer systems, peripherals, and software applications, as necessary.

* User Training: Offer training to end-users on how to use hardware, software, and other IT tools effectively and securely.

* Backup Recovery: Set up and manage data backup solutions and ensure data recovery procedures are in place.

* Inventory Management: Keep track of hardware and software inventory, including licenses and warranties, and perform regular audits.

* Vendor Liaison: Communicate with external vendors and service providers to resolve technical issues and procure necessary equipment.

Job Requirements:

* Minimum Diploma / Degree in Informatics, Computer Science, IT Engineering or Equivalent

* Proven experience in IT support, preferably in a help desk or technical support role, especially on the trading floor - will be a plus.

* Should candidates have experience in the brokering industry (Oil & Gas), knowledge in - ICE, CLoud9, IPC, MFC Setups; is preferred.

* Proven and strong troubleshooting ability’s

* Excellent communication skills, both written and oral

* Office 365 support experience

* Good knowledge of windows server 2019 and above

* Active directory administration

* Experience of Azure hybrid environment

* Understanding of DNS and DHCP

* Good knowledge of networks and networking

* Ability to work on new tasks and to be able to research unaided

* Experience in Remotely support users

* Experience in working in a highly secure domain

* Excellent understanding of hardware and software

* Knowledge of FortiGate’s (nice to have not essential)

* Experience of supporting users with SharePoint

SmartClean is an IoT company building end-to-end Digital Systems, including Sensors and cloud-based software. At SmartClean, we are looking for an Electrical and Instrument Technician,

• who has hands-on experience with Wiring and network configuration, etc.
• Routine maintenance, troubleshooting & site installation work.
• Site recee of Project Sites.
• Prior knowledge and understanding of IoT is a must.
• At least 5-year prior relevant work experience.
• Able to speak and write basic English
• Able to start immediately

Our client is a tank storage company.

• Perform preventive and corrective maintenance, ensuring quality and safety standards.
• Ensure compliance with safety regulations and manage permits like JSA and LOTO.
• Oversee work orders, support contractors, and mentor junior technicians.
• Contribute to process improvements, supervise projects, and lead equipment training.

Requirements:

• ITE in Maintenance Engineering or equivalent.
• At least 2 years of experience in maintenance, inspection work, and terminal equipment and assets.
• Well-versed in terminal equipment, assets, and fire-fighting and emergency procedures.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Job Description

• Industry/ Organization Type: Manufacturing / Construction
• Position Title: Service Technician
• Working Location: Senoko
• Working Hours: 5 days (Monday to Friday, 8.30 AM – 6 PM)
• Salary Package: Basic Salary up to $2,300 + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Diagnose, repair, and maintain machinery and equipment used in the manufacturing and construction processes.
• Perform regular scheduled maintenance and service checks to ensure optimal equipment function.
• Respond promptly to service calls and provide technical support to resolve issues on-site.
• Liaise with the parts department to manage inventory and order necessary components.
• Adhere to all safety guidelines and regulations, and use protective equipment when on the site.
• Stay updated on industry advancements, integrating new techniques into servicing procedures.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum NITEC in Electrical Engineering / Mechanical Engineering or equivalent
• Has 1 year of working experience in the relevant industry
• Proficiency in AutoCAD is an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67098 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Electronic Repair Technician (Aviation)
• Working Location: Seletar – Nearest MRT: Khatib
• Working Hours: Monday to Friday, 8.30 am – 5.45 pm (May need to work Saturdays depending on duty)
• Salary Package: Up to $2700
• Duration: Permanent

Key Responsibilities

• Regularly inspect, test, and troubleshoot avionics systems, including radar, navigation, communication, and flight control systems, ensuring they function correctly and comply with safety standards.
• Use specialized diagnostic tools and software to identify electronic malfunctions or system failures, isolating faults to efficiently carry out repairs.
• Conduct repairs, replacements, and adjustments to aircraft electronic systems such as autopilot, radio systems, GPS, and onboard computers.
• Install new electronic equipment or upgrades, such as advanced communication systems, navigation aids, or flight control systems, ensuring they integrate properly with existing aircraft systems.
• Inspect and repair aircraft wiring, ensuring proper electrical connections and shielding to prevent system failures or electrical fires.
• Calibrate, test, and adjust avionics instruments and sensors, ensuring the accuracy of crucial systems like altimeters, airspeed indicators, and flight data recorders.
• Log all diagnostic tests, repairs, installations, and inspections accurately in the aircraft's maintenance records to ensure compliance with aviation regulations and company policies.
• Follow all relevant aviation safety regulations, including FAA, EASA, or local aviation authority guidelines, ensuring all electronic systems meet strict airworthiness and operational standards.
• Ensure that avionics systems are running the latest software versions by performing regular updates and troubleshooting new software issues that may arise.
• Monitor and maintain the integrity of the aircraft’s electrical power supply to avionics systems, ensuring uninterrupted power flow and system reliability.
• Conduct post-maintenance checks to verify that repairs have been completed properly and the aircraft is ready for flight.

APPLY NOW!!!

• Min. a Diploma in Aerospace Engineering or related
• Min. of one (1) year of relevant work experience
• Training provided for candidates with no experience
• Candidates with CAAS Aircraft Maintenance Certificate Preferred

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70290 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Information:

Working Hours : 8am~8pm / 8pm~8am (Rotating Shift)

Shift Pattern : Work 4 Days, Rest 3 Days

Meal Allowance and Shift Allowance provided

Responsibilities:

• Assist in the maintenance of mechanical or electrical installations and equipment within the compound.
• Provide engineering support to all depts if required
• Diagnose and repair faulty equipment, perform preventive maintenance to minimize equipment breakdown.
• Carry out instrumentation calibration activities.
• In charge of maintenance and troubleshooting of entire facility duties.
• Involve in TPM (Total Productive Maintenance) activities.
• Report to Manager in Engineering Department

Requirements:

• Minimum Nitec or equivalent.
• Relevant experience in electrical installation, PLC (Programmable Logic Controller) and electrical maintenance preferred.
• Good technical knowledge with hands-on experience in troubleshooting & servicing HVAC equipment eg chillers, cooling towers, aircon, air compressors etc
• Experience in simple welding, piping work, and simple machining work.
• Computer literacy.
• Physically fit and able to work shifts.
• Positive, easy-going and a good team player.
• PPE Requirements : Jumpsuit and Mask in Production Area

Interested candidate can send in your resume in Microsoft Words, along with a picture of yourself to :

[email protected]

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Carol Tan

EA License No.: 23C1894

EA Personnel No.: R24121972