Mandai Wildlife Group is the steward of Mandai Wildlife Reserve, a unique wildlife and nature destination in Singapore that is home to world-renown wildlife parks which connect visitors to the fascinating world of wildlife. The Group is driving an exciting rejuvenation plan at Mandai Wildlife Reserve, adjacent to Singapore’s Central Catchment Nature Reserve, that will integrate five wildlife parks with distinctive nature-based experiences, green public spaces and an eco-friendly resort.

Job Duties and Responsibilities:

· Carry out inspection, servicing and maintenance of vehicles and other automotive equipment.

· Perform electrical and mechanical troubleshooting of automotive system and equipment.

· Other relevant duties as assigned.

Job Requirements:

· Minimum ITE/Diploma in Electronics/Electrical Engineering or equivalent.

· Minimum 2 to 3 years of relevant experience in automotive, equipment and electrical maintenance and troubleshooting; candidates without experience are welcome to apply.

· Possession of Class 2B/3 licenses and proficiency in Microsoft Office will be an added advantage.

· Proactive and a team player with good problem-solving skills and attention to details.

· Able to perform shift work, work on weekends and public holidays.

Shortlisted candidates will be allocated to the respective parks accordingly.

Job Description:

• Read and follow lab procedures.
• Perform inspection (visual & functional) according to Receiving Inspection procedure.
• Perform manual (ASIC) chip serialization per lot/wafer.
• Perform ASIC testing and screening, PCBA product reconfiguration, labelling & packaging based on the specifications or customer requirements.
• Collect test data & perform (ASIC) chips verification for each passed unit.
• Prepare FAI to be sent to customer for final buy-off.
• Perform system transaction.
• Additional duties and responsibilities as assigned.

Job Requirement:

• Basic computer knowledge including experience with Microsoft Excel & Word.
• Capable of lifting 10-16kg cartons of product.
• Able to read and follow company and lab Quality & Environmental procedures.

Job Scope:

• To carry out water sampling for process unit and send to lab for analysis and follow up with the recommendation in process.
• Operate Boiler / Evaporator / cooling tower / RO in the WasteWater Plant
• Control Pane operation through SCADA system to monitor and adjust process parameters.
• To update test result in data system
• To handle general workers in the plant for daily plant works and chemical handling
• To maintain all the process units/ pumps and equipment’s and instrument in good condition.
• Company Emergency Response team member
• To support shift ad-hoc operation

Requirement:

• Education – NITEC & above
• Skills - Basic English communication includes reading and writing skill
• Abilities – Ability to work independently
• Other characteristics such as personal characteristics – Team player with interpersonal skills (gentle, considerate and patient)
• People certified with Forklift / WAH/AWSHPP/ Boiler attendant class-1 have added advantage.

1.1. Broad Functions:

The primary responsibility of a Production Process Technician is to support the efficient and safe operation of the plant's production processes. They play a crucial role in ensuring that equipment and systems function optimally, production runs smoothly, and product quality meets the required standards.

1.2. Job Description / Responsibilities:

1.2.1. Ensure the smooth operation of the production plant.

1.2.1.1. Follow work SOPs.

1.2.1.2. Observe safety rules and 5S.

1.2.1.3. Ensure cleanliness of work area, upkeeps equipment and assist in the maintenance program and operating of production machinery and equipment.

1.2.1.4. Assists in loading and unloading of ISO tanker, raw materials, carries out chemical waste sorting, waste transfer and stock keeping.

1.2.1.5. Collect process data.

1.2.1.6. Routine plant logging

1.2.1.7. Conduct site walks to discover abnormalities.

1.2.1.8. Conduct material weighing and charging (PA & RE)

1.2.1.9. Assist TL in troubleshooting plant issues.

1.2.1.10. Grade change cleaning activities (PA & RE)

1.2.1.11. Perform confine space Tank cleaning (PA & RE)

1.2.1.12. Reactor cleaning (PA)

1.2.1.13. Conduct process gas and product sampling using gas chromatography (RE)

1.2.1.14. Perform weekly PH meter calibration (CHE & PA)

1.3. Requirements:

1.3.1. Min “O Level or equivalent or NITEC in Chemical Engineering or equivalent

1.3.2. Fresh graduate acceptable

1.3.3. Relevant working experience in a chemical manufacturing industry is an advantage.

1.3.4. Computer-literate able to perform data entry and use Microsoft Excel

1.3.5. Good communication skills

1.3.6. Hands-on and able to multi-task

1.3.7. Self-disciplined, good team player,

1.3.8. Responsible and independent worker

1.3.9. Have a safety mindset.

1.4. Others:

1.4.1. Location: Jurong Island (Company Transport provided)

1.4.2. Commence work: ASAP.

1.4.3. Applicants can work in Singapore without requiring a work pass.

1.4.4. Working Hours: 12-hours Rotation Shift

1.4.5. Salary Range: 2.0K to 2.4K

Job Description

Prepare and pack high-quality cuts of meats according to customer specifications using company standards and adhering to all safety requirements.

The majority of time will be spent operating processing equipment.

Operation of Meat Processing Equipment

Pack, trim, and customize portions of meat products using knives, or other meat production equipment.

Count and stack on tray portions per customer and company specifications

Label portion with a supplied number of product labels

Set up packing and labeling area as required

Perform end-of-day functions

Actively maintain, and merchandise partial cart

Keep the packing area, cutting room, and surrounding area clean and sanitized.

Follow company GMP (Good Manufacturing Practices) to maintain sanitary conditions

Work rotating shift

Physical Requirements

• Lift up to 30 lbs. regularly, including overhead lifting, and up to 60 lbs. occasionally. Push/pull up to 40 lbs. regularly.

• Meet established volume/activity standards.

• Stand or walk 100% of the time.

• Frequent reaching, grasping, and lifting individual stock items below waist level or above shoulder level.

• Frequent bending, kneeling, and squatting.

• Able to handle a variety of substances associated with cleaning materials, packaging materials, and food products.

• Tolerate working in extremely cold temperatures -18 °C – 10 °C

• Ability to use computers, calculators, and communication systems required to perform the job functions.

Kindly send in your full resume with your expected salary & earliest start work date.

We regret that only shortlisted candidates will be notified. Thank You.

Ruby Ng

R1106066

Seeking Veterinary Nurse/Technician/ Receptionist/ Student / Volunteer

Passion Vet Clinic was established in early 2015 with the aim to provide the best care for our patients. The passion vet team comprises of motivated vet and loving vet nurses/techs.

Our clinic is fully computerized and is well-equipped with In-House Blood test Machine (Abaxis), electrocautery, Covidien Ligasure, Acupuncture equipments, oxygen generator, Isoflurane anaesthetic machine, Surgivet monitoring, ECG, nebuliser, dental machine, Xray, orthopedics instruments and NX3 Siemens Ultrasound.

We are currently looking for caring and passionate individuals who wish to develop themselves in the long term.

Vet nurse/Technician/Receptionist (Full Time/ Part Time):

- Prior relevant experience is preferred

- Flexible work arrangement possible

- Clinic offers on the job training

- Involves some receptionist work

- Mandarin and English speaking preferred

The individual should be computer literate and posses great communication skills and work ethics. The clinic welcomes students/volunteers too! *Students / volunteer must be 18 years old and above. Interested applicants please submit your resume to [email protected]. *Only shortlisted individuals will be contacted.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Responsibilities

• Carrying out the maintenance of production and auxiliary machinery according to the Quality/ Environmental Procedures and Works Instructions.
• Plan and organize the preventive maintenance programs for all plant equipment and facilities.
• Liaise with Production Department to ensure that all scheduled equipment maintenance and repairs are carried out on time to enable smooth production operation.
• Maintain proper records of all electrical drawings and activities.
• To constantly participate in brainstorming ideas to develop and fabricate machinery, jigs & fixtures in support of the production processes.
• Train and develop Technician and helper so that maximum effectiveness and good performance are achieved and maintained.
• Maintain work discipline and motivate subordinate, setting standard for performance review
• Control and maintain sufficient manpower through proper managing of the subordinate attendance to meet the daily work requirement
• Recommend replacement for turnover and new addition.
• Implement safety program and enforcing the practice by the subordinates

Job Requirements

• Knowledge in PLC and able to work with different brands.
• Bilingual in English and Mandarin or Malay.
• Minimum ITE Cert or Diploma in Electrical Engineering
• Preferably experience in Safety activity
• No Color Blindness

Job Description & Requirements

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Summary: We seek a highly motivated and skilled technician to join our growing team. You will play a crucial role in supporting the deployment of automation solutions and ensuring the successful installation of our projects regionally.

Responsibilities

1 Communicate with engineers to ensure that services are delivered effectively.

2 Handle mechanical assembly based on the provided drawings

3 Prepare electrical panels based on the provided drawings

4 Perform simple mechanical and electrical repair of installed machines

5 Support with scheduled preventive maintenance and upkeep of installed machines

6 Support with installation & commissioning of new equipment onsite

7 Support with fabrication & wiring during project execution

8 Travel to customer sites to support with service enquires whenever needed

9 Keep up to date on administrative responsibilities such as maintaining customer service logs and internal service records in a timely manner

10 Maintain in-house stock and inventory for robot maintenance

11 Performs ad-hoc duties as assigned by the manager

Requirement

1 Diploma in mechanical engineering, electrical engineering or a related field

2 Excellent hands-on skills in mechanical assembly, soldering, crimping, etc

3 Knows how to handle electrical tools like crimpers, wire strippers, ferrules, etc.

4 Must be good in handling mechanical tools such as drills, taps,

5 Basic knowledge of Linux commands will be a bonus

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Responsibilities

• Configure and manage infrastructure systems, applications, and network equipment (e.g., Active Directory, data centers, firewalls, VPN, video conferencing).
• Oversee desktops, mobile, and remote devices.
• Ensure automated backups, disaster recovery processes, and system patches, with close monitoring of resource usage.
• Work with external vendors to uphold SLAs.
• Develop and update technical documentation (admin and user guides).
• Support local and international users over LAN/WAN securely.
• Identify suitable products, solutions, and suppliers for project needs.
• Provide L1/L2 support and participate in projects as a lead or team member.

Requirements:

• Diploma/Degree in Computer Science, IT, or CCNA Certification.
• At least 1 year of relevant experience.
• Proficient in enterprise networking (WAN, LAN, VPN optimization).
• Skilled in Microsoft Server (2012+), Microsoft 365, Google Suite.
• Knowledgeable in internet architecture (TCP/IP, DNS, DHCP, Proxy, Firewall).
• Familiar with Alcatel PABX, FortiGate, Cisco, and Unifi Wireless AP Controller.
• Strong understanding of CyberRisk and CyberSecurity; PDPA familiarity preferred.
• Experience with Veeam, VMware, and UNIX/Linux is beneficial.
• Background in API/Web Programming and Database Administration is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Requirements:

• At least 10 years experience

• Willing to work on holidays / work on shifts / change of shift

• Able to stand/work for long hours

• Can work between different locations

• Have relavant certificates

• Carry out repair and routine maintenance duties on equipment, building facilities and offices, building systems, grounds, and structures
• Coordinate efforts with company’s contracted HVAC vendors to ensure company HVAC systems are functioning perfectly
• Perform inspection, maintenance, repairs, and installation of air conditioning systems, including D.D.C. building control and pneumatic systems, cooling systems, refrigerators, ice machine, refrigerated water coolers, and similar equipment
• Carry out maintenance checks on heating, ventilation, and air conditioning systems; clean evaporator drain pans, coils, and filters; lubricate fan and motor bearings; repair and change motors, electrical wiring, belts, compressors, thermostats, fans, floating elements, and defrost timers
• Place airflow controls to occupants’ preference by adjusting dampers, splitter, diffusers, and fans speeds; take away, clean, and change filters and strainer; remake, repair, and paint metal and wood cooling fans and towers; add the right amount of chemicals to water towers to prevent corrosion and rust
• Run equipment, observe its operation, and read instruments and gauges, including Volt-ohm meters; find out temperature gauges and adjust mechanisms, including valves, pumps and controls to direct levels of fluid, temperature, and pressure; charge with specified types and amount of refrigerant, and bleed contaminants from systems; inspect gauges and carry out periodic preventive maintenance checks
• Carry out overhauling and servicing of refrigeration units by repairing, changing, or reworking broken parts of compressors, condensers, and vacuum pumps; inspect Freon level in refrigeration units and fix any leak observed, and charge units as required; clean and change filters on ice machines and similar equipment; inspect heating elements and change if bad
• Perform repairs or adjustments on piping connections, valves, couplings and fittings by riveting, bolting, welding, brazing, and soldering applying hand tools, drill press, prestolite torch, and acetylene torch
• Take away pumps and motors, change bearings and shafts, repacks and perform reinstallations; perform adjustment on expansion valves; change, fix, and re-calibrate humidistats and thermostats, change hinges, gaskets, and hardware
• Provide assistance to supervisor in planning new installation and modification projects, preparation of specification, and major reconditioning and overhauling projects, applying knowledge of refrigerating systems, engineering specifications, and blueprints
• Order for replacement of equipment parts as required, perform repairs as ordered, and keep record of servicing on equipment
• Provide assistance to colleagues in the department to effectively maintain, and repair equipment, buildings, and municipal properties
• Carry out minor electrical maintenance work, such as repair or replacement of fixtures, including wall switches and outlets, ballast, incandescent and fluorescent tubes and bulbs, fuses, sockets, etc., by applying the right tools
• Carry out minor plumbing maintenance work, including change or repair of leaks in faucets and drains, trenching and laying of new lines, unclogging of drains, etc.
• Carry out minor masonry, painting, and carpentry work
• Carry out restructuring, installation, positioning, and re-mounting of modular offices and space, including furniture, work surfaces, wall panels, lighting, file cabinets, storage bins, etc. to maximize office space and meet user needs
• Provide support after work hour if required in situations like emergency, workshop, commission meetings, and other company functions
• Perform related duties that may be assigned.

• Carry out routine, preventive and corrective maintenance, troubleshooting and repairing of instrument, analyser and electrical equipment, e.g. control valve, transmitters, switchgear control, motors, GC, boiling point, freeze point and flash point analyser, etc.

Requirement:

• Diploma or NITEC in a relevant Engineering discipline
• At least 3 years relevant experience in an oil refinery/petrochemical plant, preferably with EMA license
• Candidates without relevant experience may be considered for entry-level positions

We're looking for dedicated and skilled Component Technicians with at least 3 years of experience specializing in the overhaul of Automated Manual Transmissions (AMT) and truck air components with a focus on Japanese models. Possesses a strong mechanical aptitude, attention to detail, and a commitment to quality standards. Proven ability to work in team settings.

Responsibilities

· Overhaul and repair of AMT transmissions
Able to perform complete overhauls of Automated Manual Transmissions (AMT), including disassembly, inspection, component replacement, and reassembly to manufacturer standards

· Overhaul on truck air system components
Able to perform overhaul on truck air components such as air compressors, air brakes, and valves, ensuring proper functioning and compliance with safety standards.

· Able to utilize the diagnostic tools to identify issues in transmission systems and air system for accurate repairs will be an added advantage.

· Collaborate with team members to resolve complex technical issues and implement solutions in accordance with company procedures.

· Maintain detailed service records, including component testing, calibrations, and repairs.

· Compliance with company safety protocols and procedures

Requirements

• Technical school with 3 year working experience in the overhaul of Automated Manual Transmissions (AMT) and truck air components with a focus on Japanese models
• Able to read and write in English
• Proven experience in component repair, trouble shooting and measuring

· Perform incoming, in-process and outgoing quality control activities

· Liaise with customers pertaining product specifications and quality issues

· Update quality standards regularly in order to conform to customer’s requirements

· Perform in-coming, in-process and final QC daily activities

· File and update QC testing records or reports

· Review and verify daily routine QC results

· Liaise with Logistic Coordinator to arrange for outgoing shipment activities

· Report abnormalities to QA Supervisor

· Prepare quality related reports

· Take part in ISO 9001:2015 IQA activities

Any other duties and responsibilities assigned by the Company from time to time

Work Place : Pasir Ris (2 weeks training @ Woodlands)

Working Day : 5.5 days

Working Hour : 8.30am to 6pm, 8.30am to 12.30pm

OT available

• $2200 - $3000
• 5.5 Days work
• 8am to 5pm, 8am to 12pm
• AWS + VB
• Working Location: Pandan (Clementi)
• Shipbuilding Industry

Responsibilities:

• Perform inspections, troubleshooting, and maintenance on a variety of marine equipment
• Diagnose and repair mechanical, electrical, and electronic issues
• Maintain detailed records and documentation
• Installs and repairs wiring, fixtures, and equipment for all electrical services aboard ship and in shipyard facilities

Requirements:

• Nitec in Electrical or similar
• At least 1- 2 years working experience in electrical repairs and maintenance
• Candidate possess LEW certificate with EMA or hold a valid Licensed Electrical Worker (LEW) certification is an added advantage

Interested applicants, kindly send your updated resume to +65 8288 5668 or Email to "[email protected]"

We regret that only shortlisted candidates will be notified.

EA Reg. No: R1222284 | Kelvin Soh

Responsibilities

• Configure and manage infrastructure systems, applications, and network equipment (e.g., Active Directory, data centers, firewalls, VPN, video conferencing).
• Oversee desktops, mobile, and remote devices.
• Ensure automated backups, disaster recovery processes, and system patches, with close monitoring of resource usage.
• Work with external vendors to uphold SLAs.
• Develop and update technical documentation (admin and user guides).
• Support local and international users over LAN/WAN securely.
• Identify suitable products, solutions, and suppliers for project needs.
• Provide L1/L2 support and participate in projects as a lead or team member.

Requirements:

• Diploma/Degree in Computer Science, IT, or CCNA Certification.
• At least 1 year of relevant experience.
• Proficient in enterprise networking (WAN, LAN, VPN optimization).
• Skilled in Microsoft Server (2012+), Microsoft 365, Google Suite.
• Knowledgeable in internet architecture (TCP/IP, DNS, DHCP, Proxy, Firewall).
• Familiar with Alcatel PABX, FortiGate, Cisco, and Unifi Wireless AP Controller.
• Strong understanding of CyberRisk and CyberSecurity; PDPA familiarity preferred.
• Experience with Veeam, VMware, and UNIX/Linux is beneficial.
• Background in API/Web Programming and Database Administration is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Albatec is looking for a Warehouse & QC Technician to work with us in a dynamic and clean environment. Candidate to have self-consciousness in safety and assist in maintaining warehouse cleanliness and safe working environment.

Requirements

• Minimum Higher-Nitec and above
• Possess Forklift license or Class 3 license
• Knowledge on the use of measuring instruments, i.e. vernier caliper, micrometer, etc

Responsibilities

• Arrange warehouse inventories, maintain cleanliness and housekeeping
• Operate material cutting band saw
• Operate pin stamp machine for material marking
• Conduct visual and dimensional inspection of components and material stock
• Post-process machined materials e.g. deburring, polishing, etc
• Unpack and pack goods for inspection and delivery respectively
• Assist in machine maintenance

SERVICE TECHNICIAN (5 Day / West)

Job Type : Full-Time

• Travel Opportunity
• Training Provided
• 5 Days Work Week

Responsibilities :

• Have a passion to carry out trouble-shooting and maintenance works.
• Love the satisfaction after solving difficult machines.
• Willing to do hands-on work
• Willing to do brazing work
• Any other adhoc duties as assigned

Requirements :

• Candidate must possess at least Secondary School / "O" Level, Professional Certificate / NiTEC, Diploma / Advanced / Higher / Graduate Diploma in Engineering (Industrial), Engineering (Mechanical), Engineering (Mechatronic / Electromechanical) or equivalent.
• Required Language(s) : English
• Required Skill(s) : Aircon, Refrigeration, Chiller, Mechanical, Vacuum Pumps, Water Pumps, Scrubbers or Chillers.
• Able to travel on short notice
• Possess valid driving license (optional)
• Only Singaporean / SPR / Malaysian may apply.

Interested candidates who wish to apply for the advertised position, please send to us your resume via APPLY NOW

Email : [email protected]

We regret that only shortlisted candidates will be notified.