The Job: -

• To operate assigned units of HDPE plant to produce on-specification products to meet production goals according to plant operations procedures.
• To operate the sophisticated computer control system, process logical control, etc. to optimize plant operation.
• Interprets laboratory results, taking corrective actions according to the plant operating manuals, coordinatewith other departments on plant sampling for laboratory analyses, and Materials Handling on product transfer.
• Oversees Permit-To-Work System at various work stages (Gas-freeing / planning / coordination / preparation / execution) of process equipment and issues clearance certificates (work permits) for maintenance work in accordance with established procedures.
• To work on rotating shift (2 cycle).
• Able to handle load up of approximately 25kg if needed.
• Able to work from heights.

Qualification/Experience: -

• Diploma / NTC 2 in Chemical Process Technology or equivalent
• GCE “O” level, preferable with credits in English, Science (Physics or Chemistry) and Mathematics
• Experience in petrochemicals process manufacturing facility is an added advantage.

Job Requirement

1. 1 – 2 years’ experience or knowledge in the Project Site of chemical industry.

2. Possess a Diploma or equivalent

3. Microsoft office skills

Job Responsibilities

1. Monitor project activities

2. Report to Section manager/Department Manager

3. Maintain and control project site and safety

4. Verify project deliverable with site documents

5. Report to Section Manager on site/safety deviation or issues on projects

6. Attend/Conduct tool box meeting

7. Report & Assist Section manager/Engineer in project deliverables

8. Participate in department EHS activities

9. Assist maintenance activities

10. Prepare PR and update the cost summary as required

11. Maintain project document filling and organize documents

Job Responsibilities

1. Reports directly to the section engineer and/or designate

2. Carry out all laboratory tests and measurements accurately in accordance to procedure

3. Prepares standards and reagents for analysis in accordance to procedure

4. Perform basic maintenance and troubleshooting of instruments

5. Handle ISO Documentation/Raw Data for QA Department

6. Accurately update and monitor internal Statistical Process Control (SPC) charts

7. Maintains and checks inventory of all storage samples

8. Support the QA Section in its activities as and when required

9. Performs any other tasks as instructed by the supervisor, engineer, QC section manager and HOD

Job Requirement

1. Candidate with Diploma in Chemical or science discipline preferred (fresh graduates from local polytechnic)

2. Experience with analytical instruments like ICP-MS, AAS, etc.

3. Ability to communicate clearly in both writing and verbally and good interpersonal skills

4. Basic understanding of ISO9001, ISO14001 and OHSAS18001 standards will be an advantage

5. Proficient in Microsoft Office Tools

Job:

• To operate assigned units of HDPE plant to produce on-specification products to meet production goals according to plant operations procedures
• To operate the sophisticated computer control system, process logical control, etc. to optimize plant operation
• To work on rotating shift (2 cycle)
• Able to handle load up of approximately 25kg if needed
• Able to work from heights

Qualification/Experience:

• Diploma / NTC 2 in Chemical Process Technology or equivalent
• GCE “O” level, preferable with credits in English, Science (Physics or Chemistry) and Mathematics
• Experience in petrochemicals process manufacturing facility is an added advantage.

• Provide support in incident, request, change and problem management related to database operations.
• Provide oncall support, including outside of office hours, and participate in Major incidents.
• Ensure SLA for incidents and service requests are met with high quality of work.
• Ensure KPIs, such as breach case target, MTTR and escalation target is met.
• Install and upgrade database systems, apply patches and implement changes when required.
• Diagnose and troubleshoot database errors ensuring high availability of database systems.
• Manage databases access, backups and ensure compliance to database and security standards.
• Monitor database performance proactively and perform analysis of cases to prevent recurring issues.
• Review and enhance database monitoring when required.
• Develop processes and operation procedures related to database operations.
• Create and manage database reports, visualizations, and dashboards.
• Perform capacity planning and participate in Disaster Recovery drill.
• Provide global support for sites in North America and Asia, including on weekends and holidays.
• Perform changes on critical databases related to manufacturing and engineering.
• Collaborate with site customers on new database requirements, problem resolution and data flow requests.
• Performance tuning of databases to ensure high performance and availability.
• Engineer solutions and automations to improve productivity and efficiency of database operations and reliability and availability of the database systems.
• Recommend and implement emerging database technologies.
• Participate in worldwide collaboration for technical sharing and reference architecture alignment.

Job Highlights:

Stable and friendly working environment.

Various Bonus.

Provide opportunities for career advancement within Co.

Work and life balance.

Job Description & Requirements:

Due to an increase in our service activities in our service department, we are looking for a qualified Engineers in the feild of automation or Instrumentation for marine vessels.

1. Experience in shipyard and marine vessels.

2. Experience in servicing of vessel automation systems.

E.g. Tank gauging, gauges, transmitters, valve positioner, etc.

3. Ability to work both independently and as part of team.

4. Able to travel to regional countries.
5. Good communication skills.

6. Class 3 driving licence (prefer).

Arkema is the leading manufacturer of this unique advanced material’, which is very durable, fully recyclable, and is produced 100% from castor oil, a renewable and sustainable raw material. Its applications are many and varied in automotive, sports, consumer electronics, 3D printing/additive manufacturing, bio-textiles, and medical, all of which are experiencing strong growth, particularly in Asia.

This new plant will increase our polyamide 11 global production capacity by 50%, in full accordance with a circular economy approach.

Join Arkema and...

Design the materials of tomorrow
We work towards sustainability every day, using our technological breakthroughs to boost our customers’ performance.

DESIGNER OF INNOVATIVE SOLUTIONS
Work for an international leader in its markets
Arkema is one of the top three global leaders in almost all of our product lines, generating an equal volume of sales in Europe, North America and Asia.

We are hiring for Process Technician and following is the Job Description :-

MAIN RESPONSIBILITIES

DCS Operation

• Perform starts up and shuts down according to Standard Operating Procedures, Work Instructions or Checklists,
• Monitor and control process variables via DCS (towers, reactors, driers, compressors, etc) to maintain quality & plant in steady & efficient condition,
• Respond to process alarms, process upsets or abnormal process conditions according to established practices and procedures in order to begin or cease production as advised by Supervisor or Engineers,
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements,
• Initiate and perform Safety bypass with approval from Supervisor.

Field Operation

• Performs equipment line-ups and operate towers,reactors, driers, compressors, pumps, etc according to established practices and procedures,
• Responds to upsets or abnormal process conditions according to instructions from Supervisor or Panelman,
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements,
• Collect process samples from assigned sampling points in a safe manner,
• Equipment Inspection Tours according to checklist.

First Line Maintenance

• Perform first line maintenance task for equipment size below 4” eg. cleaning strainers or filters, opening & closing flanges, connecting hoses, tightening packing or flange leaks.

Quality Assurance

• Online (PI system) quality monitoring,
• Reporting deviations to supervisor, investigate process conditions and adjust process variables accordingly.

HSE

• Report all incidents, near misses, deviation from plan promptly to Supervisor,
• Create and issue Safe Work Permits (Part of Work Flow),
• Isolates all equipment (lock out / tag out) as required, in accordance with established procedures,
• Performs CAR Seal Checks according to annual program,
• Participates as a member of the Initial Response Team during emergencies,
• Prepares equipment for maintenance ensuring all required testing (JSO's) has been performed,
• Performs site verification before accepting & closing off Safe Work Permits,
• Contribute to the improvement of the Safety, Health, Environment and Quality Programs.

Daily Management

• Performs Shift Handover,
• Attends Daily Tool Box Meeting,
• Conduct proper shift relief and documentation in shift report and shift handover.

Materials Management

• Cover Material Receiver’s role during his absence.

Administrative

• Maintains open and continuous communication and feedback to Supervisor,
• Maintains good housekeeping around work place & plant
• Participates in safety committee and housekeeping activities as required,
• Accepts on call duty and overtime as required,
• Works as a member of the shift team to achieve measurable performance objectives by understanding and accepting roles and responsibilities within the shift team,
• Willing to work on special projects as needed.

EDUCATION/BACKGROUND

• NITEC in Chemical Process or Diploma in Chemical Engineering
• At least 2 years of experience within Chemical and/or Petrochemical industry

SKILLS & KNOWLEDGE

• Knowledge in Distributed Control System (DCS) is a plus
• Forklift's driving license;
• Reactive to malfunctions
• Reporting skills
• Effective team player with good communication skills
• High self-motivation
• Attentive to details

COMPANY DESCRIPTION

Grocery Logistics Singapore (GLS) a wholly owned subsidiary of FairPrice Group Supply Chain, is a well-established logistics player in the Fast Moving Consumers Goods (FMCG) segment, incorporated since January 1993. Other than being the key logistics provider for NTUC FairPrice and its subsidiaries, we had serviced the Dairy Farm Group, Royal Ahold Group (since exited from Singapore Markets) and many small supermarket chains since our establishment.

RESPONSIBILITIES

The incumbent will provide shift support in the servicing and maintenance of the Automated Equipment in the Company via preventive and corrective maintenance activities. A problem solver equipped with the required technical knowledge and skills.

Responsibilities

• Carry out maintenance of the Electrical and Mechanical Equipment, Start-up, Shut-down andoperation activities
• Provide Technical Support to operation so as to meet production schedule
• Carry out stock-keeping of spare parts and housekeeping duties

• Minimum NITEC in Electrical/Mechanical or any equivalent
• Strong knowledge of automation systems, including PLC (Programmable Logic Controller), HMI (Human-Machine Interfaces), SCADA (Supervisory Control and Data Acquisition), and robotic systems is a plus
• Proficient in reading and interpreting electrical and mechanical schematics, diagrams, and technical documentation

• Work location:5 Joo Koon Circle
• Working hours:5 days per week including public holidays and weekends, rotating shifts (7:30am-5pm / 12:30-10 pm / 1:30-11pm / 8:30pm - 6am; shift hours are subjected to changes due to business needs)

Location: West

Morning shift or afternoon shift (No night shift)

Salary: $2800+$150+$200

Have AWS & Bonus

Job Responsibilities

• Perform all production activities at various stages and to work as a team with other production personnel to achieve production targets in accordance with ISO Quality Management System and applicable safety standards.
• Production Processes
• Weighing, mixing, filter preparation, filling and packaging.
• Completion of all associated production records in accordance with good documentation pratices
• Transfer of raw and packaging materials as well as finished products
• General Duties • Perform house-keeping and first-level trouble-shooting of equipment as needed.
• Equipment and area cleaning on regular intervals.
• Comply with all safety and environmental regulations.
• Work on continuous improvement initiatives within Production.
• Handle non-routine duties as assigned by senior technicians or Production supervisor.

Job Requirements

• Min GCE O Level / Nitec in production, preferably in industrial engineering.
• Min 3 years of related working experience preferably in chemical process related industry / production factory
• Computer literate (MS Office) and knowledge of Chemistry preferred

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

POSITION SUMMARY

The incumbent will be responsible for maintenance of equipment and facilities by performing maintenance, repair, troubleshoot, loop check, calibration and testing of site-wide instrumentation, control and electrical system to achieve high equipment reliability in compliance with cGMP, EHS and regulatory requirements in a cost-effective manner.

Accountable for:

• cGMP, Data Integrity and EH&S compliance
• Electrical equipment reliability and performance
• Uninterrupted process instrumentation operation
• Team performance

POSITION RESPONSIBILITIES

• Perform maintenance activities according to procedures, good engineering practices and cGMP.
• Carry out Preventive/Predictive Maintenance of plant instrumentation, control and electrical system to ensure high reliability and availability.
• Support to develop Preventive Maintenance SOP/Procedures and tasks to maintain plant assets.
• Conduct trouble-shooting and locate sources of problems by observing instrument/electrical devices in operation, listening for problems, using measuring tools and testing instruments for trouble shooting.
• Participate in continuous improvement initiatives and support (IRS/QAR) investigations.
• Support project construction and commissioning of plant equipment and systems through active involvement in punch listing and commissioning activities; discuss equipment improvement and modifications with Supervisor/Engineers.
• Maintain a safe and clean working environment on areas under one’s responsibility.
• Complete all assigned training on-time and also prior to work execution.
• Contribute to team effort by accomplishing desired results/KPIs.
• Perform calibrations on process and analytical instrumentation.
• Document all work order activities in relevant equipment logs.
• Troubleshoot and resolve calibration/instrumentation issues in a timely manner utilizing DMAIC techniques.

Qualifications

• Minimum 5 years of relevant experiences in pharmaceutical, chemical, or petrochemical industries for Senior position and Minimum 2 years for Junior position.Other Job-Related Requirements:
• Knowledge of instrument calibration, electrical system / equipment operations and maintenance skill and knowledge with experience in working in a team performance matrix environment.
• Knowledge of Computer Maintenance Management System, current Good Manufacturing Practice (cGMP) and Right First-Time technique.
• Able to demonstrates clear and concise written and verbal communication.
• Knowledge in Electrical and Instrument Maintenance Troubleshooting and Analysis Skills.

Nice-to-Have

• Bachelor’s Degree Preferably in Electrical or Electrical & Electronics Engineering or Instrumentation.
• Strong evidence of problem-solving skills.
• Strong knowledge in Process Instrument and Electrical
• Knowledge of Computer Maintenance Management System, current Good Manufacturing Practice (cGMP) and Right First Time technique.
• Able to demonstrates clear and concise written and verbal communication.
• Knowledge of instrument calibration, electrical system / equipment operations and maintenance skill and knowledge with experience in working in a team performance matrix environment.

Location: West

Have AWS & Bonus

Mon to Fri 8.30am to 5.30pm

Good career advancement

Job Description

• Identifying vulnerabilities in our network, server, workstation and so on.
• Implement a comprehensive plan to secure our IT environment.
• Monitoring network usage to ensure compliance with security policies.
• Keeping up to date with developments in IT security standards and threats.
• Collaborating with HQ and our subsidiaries IT team to improve security.
• Documenting any security breaches and assessing their damage.
• Educating colleagues about security software and best practices for information security.

Requirements

• Diploma, Bachelor Degree, Professional Degree in Computer Science/Information
• Technology or other relevant disciplines
• 1-3years relevant experience.
• Basic knowledge of IT skills and good problem solving skills to handle simple troubleshooting

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Key Responsibilities:

• Provide routine, preventive and corrective maintenance, troubleshooting and overhaul on process equipment such as piping, pressure vessel, pump, compressor, etc.

Requirements:

• Diploma or NITEC in a relevant Engineering discipline.
• At least 3 years' relevant experience in an oil refinery/petrochemical plants.
• Candidates without relevant experience may be considered for entry-level positions.

Singapore American School (SAS) is an independent, non-profit, co-educational day school offering an American-based curriculum for preschool through grade 12 with more than 4,000 students from more than 50 nations and over 700 faculty and staff on one campus. Our core technology platforms consist of Apple endpoint devices and Google Workspace for Education among a wide variety of classroom technology and applications to support academic and operational needs.

At SAS, High School supports a BYOD program while Middle School has a 1:1 Macbook program. The Elementary School, grades 1 through 5 has a 1:1 iPad program.

Roles and Responsibilities:

The IT Support Engineer (ITSE) is responsible for providing technical support to students, teachers and staff and answering general inquiries for all endpoint hardware, software and audio visual technologies. Specific responsibilities warrant proficiency in using current technology tools and digital platforms to create, communicate, collaborate and organize.

• Provide tier 1 troubleshooting and support, guiding users with steps over the phone, through remote support tools or in person.
• Tier 2 responsibility to support at least one of the assigned technology systems, as directed by the supervisor
• Provide AV/IT equipment setup and ongoing support for school events
• Installing, un-installing, configuring and troubleshooting software on students’, teachers' and staffs' SAS IT devices
• Maintain and support endpoint information technology solutions including audio visuals in a learning space or an office environment.
• Understand and assist in management of digital signage solution on campus
• Face to face and remote support for educators, students and parents.
• Guiding students, teachers and staff on IT software/system and hardware usage
• Recording all incidents and requests with relevant details in the helpdesk system reported via walk-ins, phone calls or emails.
• Vigilantly and effectively monitoring, evaluating and sharing responsibility with other team members for all incidents and requests reported via the helpdesk platform.
• Working diligently to meet the assigned SLAs (Service Level Agreements) for all reported issues and requests.
• Analyzing and evaluating all reported incidents and requests for any coordination, collaboration, escalation or delegation required with other tier 2 or tier 3 level support in the team.
• Collaborating with divisional tech help center coordinators to perform duties when stationed at a divisional tech help center.
• Assisting with deployment of purchased hardware and software
• Assisting with e-waste management of SAS technology hardware for donation or disposal
• Configure Apple devices using Mobile Device Management software
• Assisting team’s procurement specialist to correspond with vendors for faulty hardware unit repairs and replacements
• Performing other duties as and when assigned by the supervisor

Work Hours:

• Work timings will rotate between the slots of: 07:00 am to 03:45 pm, 7:15 am to 4:00 pm, or 08:00 am to 04:45 pm, including a 45 min lunch break

Qualifications and Experience:

• Diploma in Information Technology / Computer Engineering / Business Information Technology
• Relevant experience (at least two years) in providing IT Support in a dynamic environment
• Excellent communication skills in English (verbal and written)
• Positive work attitude and initiative
• Knowledge of Apple hardware and software (macOS, iOS, tvOS)
• Knowledge of audio visual hardware and systems
• Experience in Google Workspace Applications (GMail, Google Drive/Docs, etc.)
• Interest and good knowledge of technology troubleshooting, maintenance, and installations
• Able to work diligently, independently and under time constraints
• Positive and growth mindset with excellent customer service skills
• Ability to learn and adapt to new technology developments
• Keen interest and experience in researching and collaborating with team on seeking new technology solutions
• Ability to work cooperatively with the team
• Ability to be flexible, creative and problem solve novel technology issues in a fast paced and dynamic environment
• Mobile Device Management knowledge would be an advantage

Roles & Responsibilities

Job Description

· Work with team to prepare documents, tools and spare parts.

· Perform engineering work onboard ships or other locations such as dismantling, maintenance, repair, overhaul and installation works, etc, on time and according to maker's procedure/quality standard.

· Perform engineering work in the workshop such as dismantling, cleaning, inspection, measurement, repair, maintenance and reassembling.

· Support service manager in generating inspection and service reports upon completion of turbocharger servicing or other engineering works.

· Coordinate job activities to consistently meet timeline, customer job requirements, SOPs, and statutory regulations.

Requirements:

· Candidate must possess at least Primary/Secondary School/"O" Level in any field.

· At least 1 Year(s) of working experience in the related field is required for this position.

Entry level candidates are welcomed as on job training will be provided.

COMPANY DESCRIPTION

Grocery Logistics Singapore (GLS) a wholly owned subsidiary of FairPrice Group Supply Chain, is a well-established logistics player in the Fast Moving Consumers Goods (FMCG) segment, incorporated since January 1993. Other than being the key logistics provider for NTUC FairPrice and its subsidiaries, we had serviced the Dairy Farm Group, Royal Ahold Group (since exited from Singapore Markets) and many small supermarket chains since our establishment.

RESPONSIBILITIES

The incumbent will provide shift support in the servicing and maintenance of the Automated Equipment in the Company via preventive and corrective maintenance activities. A a problem solver equipped with the required technical knowledge and skills

Responsibilities

• Carry out maintenance of the Electrical and Mechanical Equipment, Start-up, Shut-down andoperation activities
• Provide Technical Support to operation so as to meet production schedule
• Carry out stock-keeping of spare parts and housekeeping duties

• Minimum NITEC in Electrical/Mechanical or any equivalent
• Strong knowledge of automation systems, including PLC (Programmable Logic Controller), HMI (Human-Machine Interfaces), SCADA (Supervisory Control and Data Acquisition), and robotic systems is a plus
• Proficient in reading and interpreting electrical and mechanical schematics, diagrams, and technical documentation

• Work location:5 Joo Koon Circle
• Working hours:5 days per week including public holidays and weekend, rotating shifts (7:30am-5pm / 12:30-10 pm / 1:30-11pm / 8:30pm - 6am; shift hours are subjected to changes due to business needs)

POSITION SUMMARY

The incumbent will be responsible for maintenance of equipment and facilities by performing maintenance, repair, troubleshoot, loop check, calibration and testing of site-wide instrumentation, control and electrical system to achieve high equipment reliability in compliance with cGMP, EHS and regulatory requirements in a cost-effective manner.

Accountable for:

• cGMP, Data Integrity and EH&S compliance
• Electrical equipment reliability and performance
• Uninterrupted process instrumentation operation
• Team performance

POSITION RESPONSIBILITIES

• Perform maintenance activities according to procedures, good engineering practices and cGMP.
• Carry out Preventive/Predictive Maintenance of plant instrumentation, control and electrical system to ensure high reliability and availability.
• Support to develop Preventive Maintenance SOP/Procedures and tasks to maintain plant assets.
• Conduct trouble-shooting and locate sources of problems by observing instrument/electrical devices in operation, listening for problems, using measuring tools and testing instruments for trouble shooting.
• Participate in continuous improvement initiatives and support (IRS/QAR) investigations.
• Support project construction and commissioning of plant equipment and systems through active involvement in punch listing and commissioning activities; discuss equipment improvement and modifications with Supervisor/Engineers.
• Maintain a safe and clean working environment on areas under one’s responsibility.
• Complete all assigned training on-time and also prior to work execution.
• Contribute to team effort by accomplishing desired results/KPIs.
• Perform calibrations on process and analytical instrumentation.
• Document all work order activities in relevant equipment logs.
• Troubleshoot and resolve calibration/instrumentation issues in a timely manner utilizing DMAIC techniques.

Qualifications

• Minimum 5 years of relevant experiences in pharmaceutical, chemical, or petrochemical industries for Senior position and Minimum 2 years for Junior position.Other Job-Related Requirements:
• Knowledge of instrument calibration, electrical system / equipment operations and maintenance skill and knowledge with experience in working in a team performance matrix environment.
• Knowledge of Computer Maintenance Management System, current Good Manufacturing Practice (cGMP) and Right First-Time technique.
• Able to demonstrates clear and concise written and verbal communication.
• Knowledge in Electrical and Instrument Maintenance Troubleshooting and Analysis Skills.

Nice-to-Have

• Bachelor’s Degree Preferably in Electrical or Electrical & Electronics Engineering or Instrumentation.
• Strong evidence of problem-solving skills.
• Strong knowledge in Process Instrument and Electrical
• Knowledge of Computer Maintenance Management System, current Good Manufacturing Practice (cGMP) and Right First Time technique.
• Able to demonstrates clear and concise written and verbal communication.
• Knowledge of instrument calibration, electrical system / equipment operations and maintenance skill and knowledge with experience in working in a team performance matrix environment.

Job Description

• Efficiently and effectively manage and operate assigned processing or packaging operation according to the standardized operating procedures, guides and manual
• Ensure the correct cleaning and sanitation of processing equipment are rendered following Good Manufacturing practices

Job Requirement

• A good team player to achieve production targets
• Self motivated and work with least supervision
• Able to be on the feet for long hours
• Transportation provided
• Candidates with relevant experience are preferable
• More focused on attitude rather than educational level
• 5.5 days week with OT's & perks

• To perform general maintenance duties in building & machineries & equipments.
• To perform preventive maintenance on machines & equipments bt cleaning, lubricating, greasing etc for optimization.
• To perform minior electrical work not requiring licence such as office lighting, appliances etc.
• To apply paint or varnish all types of surfaces for protection
• Perform related duties as required such as external support or repair
• To assist in recording facility utilities.
• To carry routine inspections on all operating machineries & equipments
• To ensure all ad-hoc work are carried out

Minimum ITE with relevant fields

Able to work as a team

Efficient and adhere to KPI's given

Conform to WSH guidelines

Work at height certificate a plus

Duties & Responsibilities

• Support end-user hardware and software deployment
• Provides support and troubleshooting for end-user incidentals
• Liaising with outsource services provider in resolving issues when required
• Support and maintain office IT assets and documentation
• Monitoring and maintaining office network and data backup and recovery
• Liaising with vendors in sourcing and purchasing or IT requirements
• Support user account maintenance for ERP system
• Help to setup or troubleshoot and resolve online meeting incidentals
• Maintain company website and email accounts
• Support branch office IT counterpart when necessary
• Any other relevant job scope assigned

Requirements

• MCandidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Computer Science/Information Technology or equivalent.
• Minimum 3 years’ experience as an IT administrator
• Must be knowledgeable in server virtualization
• Linux and Window Server deployment, configuration, and patching
• Proficiency in Office 365, Microsoft Team and perpetual Microsoft Office
• Knowledgeable in VBScript for Excel and Power BI
• Proficiency in maintaining Network switches and Firewall
• Database optimization and performance tuning
• Good interpersonal and communication skills

• Inspects specific assemblies, onboard boiler repair, deck panels, and coverings, for conformance to dimensional specifications and quality standards, using level, square, and measuring instruments and applying knowledge of carpentry.
• Responsible to issue PTW for all site work
• Responsible and accountable to follow all Safety Procedures of the site.
• Performs In process sampling and testing.
• Performs simple maintenance jobs in accordance with safety requirement.
• Preparation of equipment for lock out tag out (LOTO), filter change outs etc.
• Report all accident, injury, near miss, unsafe conditions, and behaviour to immediate supervisor so that remedial actions can be taken to eliminate risk.
• Ensure utilities and facilities problems are identified and repaired quickly.

Service Engineer / Technician (5 Day / West)

Job Type: Full-time

· Travel opportunity

· Training provided

· 5 days work week

Responsibilities

· Have a passion to carry out trouble-shooting and maintenance works

· Willing to do hands-on work

· Willing to do brazing work

· Loves the satisfaction after solving difficult machines.

· Other adhoc duties

Requirements

· Candidate must possess at least Secondary School/"O" Level, Professional Certificate/NiTEC, Diploma/Advanced/Higher/Graduate Diploma in Engineering (Industrial), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.

· Required language(s): English

· Required Skill(s): Aircon, Refrigeration, Chiller, Mechanical, Vacuum Pumps, Water Pumps, Scrubbers.

· At least 1 year of hands-on experience in trouble-shooting & service-repair of refrigeration systems or chillers

· Able to travel on short notice

· Possess valid driving license (optional)

· Only Singaporean/SPR/Malaysian may apply.

Interested candidates who wish to apply for the advertised position, please send your resume to us via ' APPLY NOW '. We regret only shortlisted candidates will be notified.

Email ([email protected])

Roles & Responsibilities

Assemble and install mechanical systems for industrial, electromedical, and manufacturing purposes Implement cost-effective changes in equipment design to improve reliability and safety

Assist mechanical engineers in developing, building and maintaining machines and tools

Read and interpret engineering designs, plans, and diagrams for piping, transmission, and HVAC systems Prepare cost and material estimates for a project

Test and analyze machines, tools, and components to determine their performance, strength and response to stress

Design manufacturing implements such as jigs, dies, and moulds

Carry out inspections to identify faults and initiate repair of mechanical systems or products

Monitor mechanical processes to ensure conformance to standard project procedures Use

CAD software and technology to prepare drawing plans and design for an engineering project

Assemble components or machine parts to form integral or complete product unit

Provide technical solutions to mechanical problems found in a variety of industries

Develop and design prototypes of equipment

Ensure compliance with health/safety procedures and regulations

Implement quality control systems useful in evaluating and testing mechanical processes/product for consistency.

Requirements

Diploma in Mechanical Engineering

Min 4-6 years experience in heavy machinery (mainly focus on construction machinery) servicing job

Familiar with hydraulic system and machinery electric system, understand the hydraulic system theory, and follow up heavy machinery trouble shooting job

Possess Class 3, 4 License is an advantage

Possess knowledge of diagnosing defects and repair mechanical equipment such as heavy machinery, Crawler Crane, Excavator or Drilling Rig, Reach Stacker etc

With electrical or hydraulic knowledge is a must

Technician

To perform day to day works in the workshop, servicing & setting up equipment and system at any worksites. Understanding of the working of engines and alternators and electrical control system would be an advantage.

Role & Responsibilities

• Able to operate at least one of the company equipment which includes generators, load banks, transformers, industrial air conditioners & chillers.
• Respond to any emergency breakdown calls
• Attend and travel for overseas assignments as and when required.
• Set up the power system for company projects, both in Singapore and overseas.

Requirement

• Technical Certificate in Electrical Engineering or equivalent. Candidate with not less than 2 years of relevant work experience may apply as well.
• Good understanding and experience on the electrical and mechanical systems
• Available to trouble shoot electrical system.
• Ability to read electrical single-line drawings and provide an overall understanding of the power system involved will be an advantage.
• Experience in LV and MV work
• Must have class 3 driving license

Job Requirements:

• Effective participation and contribution in company Environmental, Heath & Safety programmes such as Lock Out Tag Out (LOTO), permit to work (PTW), Root cause analysis, investigation, Waste Management, Emergency preparedness, Risk assessment (RA).
• Able to control and monitor process through Distributed Control Systems (DCS).
• Effective participation of company safety inspections and follow through in closing the safety findings.
• Effective participation and contribution in Quality Management System (QMS) such as GMP and other Quality standards, Creation of standard operating procedures (SOP), work instructions (WI) and records, In process analysis (IPC), Deviation and CAPA management.
• Carry-out a steady and efficient production to delivery product in time and quality.
• Responsible to monitor and control process units as per SOP
• Responsible to collect data, identify process deviations and corrective actions
• Carry-out the fine tuning of the whole plant to achieve quality and efficient operation.
• Responsible in all process improvements task and projects.
• Responsible to collect samples and perform analysis in Lab.
• Responsible to prepare equipment’s for maintenance activity and perform first level maintenance.
• Responsible for safe start up and shut down of process units.
• Point out to the hierarchy of all dysfunctions of the plant.
• Take part in all company trainings to develop his potential and capabilities in all safety, quality and process topics.
• Part of the Emergency Response Team Member in the Company to react in all sort of emergency and execute function as a first aider.

Job Requirements:

• NITEC / Higher NITEC / Diploma in Chemical Engineering with work experience in the process industry
• Experience in continuous process industry (chemical, pharmaceutical, food)
• Experience in handling DCS system (Yokogawa/Delta V)

Job Descrition

• Perform Level 1 and Level 2 IT support to users in Singapore and Asia Pacific.
• Proactively ensure high value customer service by providing customers with specific delivery times for IT solutions and clear communications, limiting the use of technology terms when not needed.
• Handle users’ requests for install/move/add/change of PC hardware and software.
• IT Asset Management - Perform asset (hardware and software) inventory, tracking and equipment retirement.
• Support the GLOBAL IT Technology refresh projects.
• Monitor and report local inventory.
• Identify and report incidents trends.
• Document processes and work instructions.
• Involve in RFQ activities for IT hardware and software.

Requirement

• At least Diploma in Electronics, Mechanical or Computer Engineering from a local polytechnic.
• At least 2 years working experience in an IT support environment with knowledge on Service Delivery operations and support including incident management in a regional environment.
• Experienced working in a regional environment for a MNC.
• Assist in compiling and analyzing statistical data and trends.
• Excellent Communication skills (both written and verbal), with the ability to interact effectively with others.
• Demonstrated analytic and problem solving skills
• Ability to meet deadlines and manage priorities.
• Technical knowledge of O365 , Microsoft Windows 7 & 10, Office Productivity Suite, Cisco VOIP Phones, Active Directory, PC imaging, Bitlocker .
• Good Knowledge with Symantec Endpoint Protection, PGP, Symantec VIP, Juniper VPN, label printers and barcode scanners.
• Perform other duties as assigned.
• Able to multi-task, is resourceful and keen to learn.
• Strong Customer Service delivery attitude