TENDER-CONTRACTS and PURCHASE ORDER T&C REVIEWS

• To conduct Tender-Contract Review and provide Lookout List and address all recommendations and queries.
• Review and comment on tender analysis prepared by project stakeholders before it is presented to the Client.
• To conduct Material PO T&C Review and advise

CONTRACTS MANAGEMENT & DISPUTES

• Provide contractual advise or interpretation when required (SG and Overseas)
• Support all BUs in highlighting critical requirement and any deviation in compliance with terms & conditions from pre-contract stage to project closure
• Assist all BU/Dept in highlighting any deviation in the terms and conditions of Contract
• Ensure proper project close out of Projects and any contract related requirement
• T provide support in all Contract Matters (SG and Overseas)
• Assist Project teams/BU's in highlighting any critical requirement and deviation in compliance with terms and conditions of main contract.
• To assist in preparation of Variation Orders and Extension of Time documents
• Draft correspondences (letters/notices/requests etc) whenever required
• To support in all Claims and Disputes (SG and Overseas)

SUBCONTRACT

• To liaise and float request for proposals to bidders and obtain necessary quotation
• To assist that requestors are familiar with the sub-contracting processes.
• To assist in monitoring and reviewing project subcontract activity
• To assist in negotiation of short listed subcontractor(s) to the lowest or best price.
• To assist in negotiating better payment terms for services and subcontracts
• To assist in monitoring Procurement Subcontract Control List
• Provide liaison assistance between project team and subcontractors
• To assist in coordinating all necessary documentation for subcontract agreement
• To assist in negotiation in coordination with project teams in any discipline
• To assist in drafting project subcontracts as per project basis which is complimenting to the respective main contract
• To assist in review of subcontract deviations from vendors
• To provide contractual advice or interpretation as and when required
• To assist with project team on short listed subcontractors
• Assist in reviewing proposals and work scope of subcontractors
• To develop SOP guidelines and to provide guide and trainings
• To assist in expediting of bi-monthly subcontract planning list to meet required schedule

Reports:

• Submit monthly contracts report at first week of the month.
• Maintain to-do list for daily activities

Main Task

1 Handle Shipment & Logistics

2 Shipping Guarantee

3 Give Training & assist buddy to support Project shipping & logistics 4 Vendor Presentation & Training as per request

5 PO Creation under shipment

6 Expedite material delivery when required

Details Task for Shipment & Logistics

1 Source of potential Forwarder and understand their strength 2 Evaluate and update new/exisiting Forwarder into Approved Vendor List

3 Ensure the appropriate Incoterms specified on the purchase order are carried out.

4 Prepare Bid Tab if required for Shipping Cost & Discuss on issuing of Puchase Order

5 Process order and ensure timely Shipment and Delivery of Purchased products

6 Coordinate & provide assistance between Requester, Suppliers and Forwarders and Receivers

7 Coordinate and assist with all necessary Import & Export Documentation for all Projects

8 Ensure documents are given to Forwarders before vessel ETA & avoid any Storage or Demurrage charges

9 Ensure timely return of Containers to yard & avoid Detention charges

10 Provide all necessary Import / Export documents to Finance for their processing on GST

11 Corodinate with FIN for payment if any issues with Forwarder invoices

12 Arrange to return back original Shipping Guarantee to bank once receive Original BL

13 Run PO report under shipment and follow invoice pending for shipment if required

Vendor Presentation

1 Send invitation to Vendors to conduct Vendor Presentation

2 Ensure topic is relevant to our projects

3 Coordinate for date time and venue

4 Inform all users on the Vendor Presentation / Training

PO Creation

1 Convert PR to PO for Shipment

2 Once Purchase Order is created, save the WO copy PO in PDF and send it to requestor/buyer to check and advise for release if required

3 Once Purchase order is signed and send the approved purchase order to vendor for their action and cc to project team for their info

4 For Internal Vendor, approved PO will send via email to them for their end processing and cc to project team for their reference

Other Tasks

1 To conduct training for PROC (Internal) about shipment

2 To conduct 2 trainings as a team for BUs (external)

3 Expeditiing material delivery when require

Glam Salon is a subsidiary company of our parent company which was established since 2002. We are a professional beauty salon that caters to individuals from all walks of life, from children to elderly.

We strive to help our clients reach their desired needs and giving them the confidence as they leave our shop with satisfaction.

Job Key Responsibilities：

· Managing the day to day Operations of the designated outlet assigned.

· Lead / Manage a team of Consultants and Therapists.

· Motivate and coach staff for better performance

· Maintain and update Customer database.

· Drive Sales into the outlet through Marketing Support.

· Promote treatments and packages to Customers.

· Maintain the outlet overall presentation and responsible for the outlet Sales and Revenue

· Lead the Outlet Team in achieving Outlet Sales Target and productivity

· Achieve Personal Sales Target

· Evaluate progress against Sales Target, identify and implement the solutions

· Responsible for daily outlet operations such as handling of customer complaints, motivate staff morale, provide guidance & coaching to staff, etc

· Train, mentor and coach outlet staff to develop and maximize their performance

Job Objectives:

• Lead and work with all outlets to ensure that all parts of the business run efficiently and effectively
• Execute different business strategies to support company growth
• Oversee employee performance and development
• Evaluate business performance, productivity and competitiveness
• Manage costs, budgets and revenue efficiently

Requirements:

· Personal monthly sales achievement

· Possess Results Driven Attitude

· Diploma in Business Administration / Hospitality and Tourism or equivalent certification.

· At least 10 years above relevant working experience, prefer managerial staff specialize in Retail Sales or Service Industry experience.

· Results and service oriented.

· Motivated, Sales driven and dynamic individuals.

· Strong leadership management and interpersonal skills.

· Good communication skills and Positive attitude.

· Willing to work retail hours.

· Full time position.

Fleek Salon is a beauty salon located at the Heart of Jurong west market. Our company have been in the beauty industry for over 15 years. Our clients are mainly from the neighbourhood with large customer base. We offer a huge variety of hair services for our clients as well as other beauty services such as facial and TCM treatments. We are expanding and our new shop requires new enthusiastic beautician who are not only outgoing but also a competent team player in order to work with other associates to promote wide variety of beauty packages and services to our customers.

We are looking for Experienced Full Time to our growing family:-

Basic Salary + Commission

1)Beautician

2) Beauty consultant

3)Hairstylist

4)Senior Hairstylist

5)Manager

Basic requirements:

-Consultant experience needed for managerial roles otherwise beauty industry experience.

- 6 days work week
- Other ad-hoc duties instructed by the manager
- Promote wide range of services and packages
- Excellent customer service and communication
- Hardworking and team cooperation
- Able to commute well with peers / a team player
- Able to speak basic Chinese and English to maintain good after-sales relationship with different racial clients. (Most clients speak English and Chinese only)
- Strong negotiation and selling skills, well groomed and presentable.
- Independent and self-motivated

-Problem solving

- Beauty / Facial knowledge

-MUST HIT PERSONAL SALES TARGET & COMPANY TARGET

A Mechanical Construction Manager in the Bio-Pharma industry oversees the planning, execution, and delivery of mechanical systems in pharmaceutical facilities. This role demands a deep understanding of the industry's regulatory standards and specialized systems.

Roles:

Project Leadership:

• Manage all mechanical construction activities to ensure timely project completion.
• Act as a liaison between project stakeholders, including clients, engineers, and contractors.

Regulatory Compliance:

• Ensure mechanical systems comply with bio-pharma industry standards such as GMP, FDA, and ISO requirements.

Technical Expertise:

• Provide guidance on specialized systems such as HVAC, cleanrooms, utility systems, and process piping.

Resource Management:

• Oversee the allocation of manpower, materials, and equipment to optimize efficiency.

Responsibilities:

1. Planning and Coordination:

• Develop detailed schedules and workflows for mechanical construction activities.
• Coordinate with cross-functional teams, including civil, electrical, and process engineers.

2. Supervision and Execution:

• Oversee the installation of critical systems such as:
  • HVAC for temperature and humidity control.
  • Process Piping for clean utilities like water for injection (WFI) and clean steam.
  • Compressed Air Systems and other mechanical utilities.
• Ensure cleanroom mechanical installations align with industry cleanliness classifications.

3. Quality Assurance and Testing:

• Conduct inspections and supervise the testing and validation of mechanical systems.
• Ensure adherence to design specifications, quality standards, and regulatory requirements.

4. Compliance and Safety:

• Ensure all activities follow safety regulations and risk management protocols.
• Maintain compliance with bio-pharma industry standards and certifications.

5. Budget and Resource Management:

• Monitor project budgets, cost estimations, and resource allocations.
• Manage procurement and delivery schedules for mechanical equipment and materials.

6. Troubleshooting and Problem-Solving:

• Identify and resolve issues related to mechanical construction, design discrepancies, or on-site challenges.
• Provide quick and effective solutions to minimize delays.

7. Documentation and Reporting:

• Prepare and maintain accurate records, including:
  • As-built drawings.
  • Commissioning and validation reports.
  • Progress updates for stakeholders.

8. Team Leadership:

• Supervise and mentor on-site mechanical teams and contractors.
• Conduct training sessions on bio-pharma-specific mechanical systems and best practices.

9. Project Handover:

• Ensure mechanical systems are fully functional and validated before project handover.
• Collaborate with operations teams to transition systems for facility use.

Job Description:

• To be responsible for the logistical, administrative and operational for construction project aspects, including liaise with customers for project requirements and progress;
• To plan the work sequence and manpower deployment require for the construction site works;
• Attend meetings, correspondences and liaise with clients, sub-contractors and suppliers in resolving design and site problems encountered during the construction period.
• To supervise workers and monitor sub-contractors at construction sites.
• To ensure efficient utilization of manpower, raw materials and consumables for our construction projects at construction sites;
• To ensure that construction projects are completed as per approved drawings within the required deadline and allocated budget;
• To take actions to resolve any delay/ technical issues/ difficulties that may arise on constructions sites;
• To ensure the works at construction sites carried out are complying with safe work procedures;
• To report to project team on work progress at construction sites;
• To prepare MOS and MSRA presentation for customer view;
• To be able to foresee the shortcomings of the project and discuss with team;
• To perform any other ad-hoc duties as assigned.

Job Requirements:

• 3 years of work experience in the related field is required for this position.
• Able to converse and write in English & Mandarin in order to communicate with local and overseas customers.
• 5-days work week
• Highly independent, client oriented and team player
• Class 3 license will be advantage
• Computer-literate & Microsoft Office skills
• Able to use Autocad/Tekla

The School of Chemistry, Chemical Engineeri​ng and Biotechnology (CCEB) invites applications for the position of Research Fellow.

Key Responsibilities:

• Perform literature study
• Set up research facilities and conduct experimental work on synthesis and application of reticular materials
• Report/manuscript writing

Job Requirements:

• PhD degree in chemical engineering, materials science and engineering, or related disciplines
• Experience in formal writing in English - for research work purposes
• Adaptable and able to multi-task
• Proficient in MS office applications

We regret to inform that only shortlisted candidates will be notified.

A Corp Lab in NTU is looking for a motivated Research Engineer to conduct cutting-edge research in the topic of “Green Cloud Computing”.

Key Responsibilities:

• Develop and implement the data and model interface for the AI/Data Twin platform with IoT or BMS systems.
• Debug and deploy the AI/Data Twin platform in on-site or cloud environments.
• Collaborate with the team to develop automation tools to optimize integration and deployment processes.
• Regularly maintain deployed platforms and perform data analysis.
• Prepare system delivery documents and maintenance reports.
• Quickly identify issues and develop solutions.

Job Requirements:

• Bachelor’s or Master’s degree in Computer Science, Automation, or a related field.
• 2-3 years of experience in DevOps and IT systems maintenance (Linux).
• Proficient in operating systems, Docker, and Kubernetes.
• Skilled in Shell programming and fundamental Python programming.
• Familiar with cloud platforms such as AWS and Azure.
• Understanding of DevOps and automated testing tools, such as Ansible and Selenium.
• Excellent communication and problem-solving skills.
• Priority given to those with a background in power systems or cooling systems.
• Ability to quickly learn new technologies.

We regret that only shortlisted candidates will be notified.

*Night Shift

Roles and Responsibility

• To perform 12hrs shift duties at any deployed sites
• To perform safe entry for staffs, workers, visitors and contractors
• To safe guard the premises through surveillance and patrols
• Identify and report unusual or suspicious movements in occurrence
• Perform access control duties at the check-point
• To monitor CCTV surveillance when required
• To update and report any fire alarm activation

Qualifications and Education Requirements

• ‘N’ Level or ‘O’ Level
• 1 year working experience

PURPOSE

• Surveyors is to ensure all ISO Tank Containers turned into our depot are surveyed, cleaned and repaired to the customers requirement standard criteria comply to ITCO/ACC or owner criteria.

SCOPE

• Surveyors is to ensure all ISO Tank Containers that have been accepted by MW Tank Depot.

RESPONSIBILITY

• Surveyors is to ensure that all ISO Tank Containers turned into our depot must conduct surveyed.
• Surveyors’ responsibility for all the ISO tank containers turn into depot are thoroughly survey correctly and to ensure the documents are endorsed before issued the Equipment

JOB DESCRIPTION

• All ISO tank containers turn into depot, surveyors ensure to stick a yellow and red colour
• Sticker onto the Left-Hand Side of the corner post before off load.
• Surveyors must coordinate with the Leese/Lessor independent surveyor for joint inspection.
• As part of a Surveyors duties, ensure to conduct thorough inspection after the cleaning, repaired and testing completed.
• Surveyors must thoroughly inspect the Tank Containers and raised estimates after the cleaning completed.
• Surveyors must report to the supervisor on all documentation of ISO Tank containers before sending to customers
• Surveyors will conduct Pre/Post inspection, if require by Customers. (Before Repair and After Repaired)
• As a surveyors must obtain instruction from the Supervisor.
• Surveyors must inform the Side Lifter Drivers to shift the Tank Containers into the
• workshop area for repair when Customers given the approval to repair.
• Surveyors must hand over the approved estimates to the Repairer Supervisor afterthe tank containers shifted into the repair bay.
• Surveyors ensure the repairer repair items accordingly indicated on the estimates and repair standard complies to ITCO/ACC or Owner criteria.

About the Role:
We are seeking an AI Engineer specializing in NLP to join our core tech team. You will develop and refine NLP and speech recognition models to power our fintech solutions. Working side-by-side with Product, Backend, and overseas engineering counterparts, you will help bring cutting-edge language technologies to life, delivering improved user experiences and efficient operations.

Key Responsibilities:

• Model Development: Design, train, and optimize NLP models (e.g., language models, entity recognition, sentiment analysis) using Python and frameworks like TensorFlow or PyTorch.
• Algorithm Innovation: Explore and implement state-of-the-art NLP techniques, keeping current with research and best practices in the industry.
• Data Pipeline & Integration: Collaborate with Backend Developers and overseas engineering teams to integrate AI models into production environments, ensuring scalability and performance.
• Performance Tuning & Evaluation: Continuously evaluate model performance, conduct error analysis, and fine-tune algorithms to meet product and business objectives.
• Documentation & Knowledge Sharing: Document your work comprehensively, and mentor or guide team members in AI best practices as needed.

Qualifications:

• Experience: 3-5 years in AI/ML engineering, with demonstrated experience in NLP projects.
• Technical Skills: Proficient in Python and familiar with machine learning frameworks (TensorFlow, PyTorch). Experience with modern NLP techniques (e.g., Transformers) is a plus.
• Problem-Solving: Ability to translate complex problems into technical solutions and optimize models for real-world fintech applications.
• Teamwork: Strong collaboration skills to work effectively with cross-functional teams, including product and overseas engineering partners.
• Able to communicate in mandarin to work with chinese-speaking counterparts.

· Analysing current business processes, workflows and procedures to identify areas for improvement.

· Developing and implementing optimised processes and procedures to enhance efficiency, productivity and customer satisfaction.

· Collaborating with stakeholders to design and execute process improvement initiatives aligned with organisational goals.

· Monitoring and evaluating the effectiveness of implemented process changes, measuring key performance indicators and making necessary adjustments for continuous improvement.

· Stay updated on industry trends, emerging technologies and process improvement methodologies.

· Following specifications and calculations to create various technical drawings with CADD systems.

Pioneer hardware shop needs cashier

working at west area

9am-6pm Mon- Sat 2000$/MONTH

Call boss directly Mr Manni:81278344

answering questions, and resolving issues
Cash register: Processing transactions, balancing the cash drawer, and counting cash and credit transactions
Payments: Accepting cash, credit, checks, and other forms of payment
Refunds: Processing returns and refunds, and issuing merchandise credit
Bagging: Bagging and wrapping purchased items

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Description & Requirements

- Transporting workers to various location within the worksite.

- Transport workers for medical attention at inhouse facility.

- Transport workers at work site from point to point.

- Transporting of goods, equipment and materials.

- Delivery of items to various locality.

- Ad hoc assignment and duties.

Requirements

- Class 3/4 licence and can drive heavy vehicle.

- 3 or more years of similar working experience.

- Good highway Code records.

- Patience and able to communicate in Simple English.

- Must be able to work Overtime during weekends/Public Holidays.

- 5 day workweek.

- Bukom Island - offshore.

- Can read and write simple English.

- Can start work in short notice.

- Previous experience working in petrochemical/Oil/Gas industry would be an advantage.

Job Description

• Maintain procurement records and documentation.
• Communicate and work very closely with the project team for preparation of the invitation of the request for Proposal and administering of the purchase requisition and award consent with the project team.
• Collaborate with procurement team in day-to-day procurement operation.
• Collaborate with Project Leads in project budget monitoring.

Requirements

• Min Diploma in Engineering, Science, Construction Management
• Min 2 years of experience, preferably in water and wastewater or waste to energy industries
• Good knowledge and experience in procurement role in the past covers purchasing and associated contractual administration works.
• Positive thinking and with supportive atmosphere amongst the procurement team
• Preferably with those with good knowledge of mechanical works cover fabrication and piping works
• Conversant of purchasing exercise and familiar with associated contractual terms and conditions for Procurement Works related to EPC Works.
• Experience in auditing and its procedures and compliances.
• Good oral and written command in English and with effective communication skills with all levels and he/she shall be proficient in Microsoft Office Suite including MS Word, Excel and Power Point.

We are AMOS Group LTD

Across the marine and energy industries, we’re the final destination for product and service solutions to help our customers with the maintenance, repair and operation of their assets. We provide global access to an unrivalled range of products and services, and each day our team of experts deliver solutions to resolve our customer’s challenges across design, procurement, inventory and maintenance. We consistently strive to deliver the best possible service to all our customers and challenge ourselves to provide a seamless Customer experience.

We are one team. We deliver brilliantly. We do the right thing. We make every day better. These are our values. They unite our 500 global colleagues and differentiate us from our competition. They are a mix of how we work today and how we must step up for the future. Most importantly, it is one set of values shaped by our people, for our people.

Together, we can make great things happen. Aim for amazing and beyond.

About the role

This role contacts assigned / agreed customers or prospects to sell company Alcona Personal Protective Equipment (PPE) range of products and services within South East Asia. Focuses on meeting assigned sales budget, new business development, maintaining customer relationships and troubleshooting specific customer problems. Has solid knowledge of AMOS products and services across AMOS’ 4 pillars, characteristics and market(s), benefits, value and potential. Uses excellent interpersonal skills and sales experience to drive customer commitment and revenue growth at the right margin.

Main responsibilities

Sales Management

• Owning and achieving annual sales budgets within assigned product sector and/or accounts.
• Ensure adherence to global sales policies, processes, and guidelines.
• Secure buy-in from key customer stakeholders and maintain optimal relationships across account teams.
• To drive profitable sales growth for the allocated customers across all sectors of responsibility.
• Develop and deploy growth strategies in conjunction with Operations and (Key) Account Managers across the respective region.

Customer Engagement

• Drive growth of the allocated PPE product sector and/or accounts by ensuring appropriate collaboration across all functions.
• Identify and pursue new/existing customers via lead generation activities, including cold calls and planned visits.
• Strengthen customer relationships by engaging with key decision-makers and navigating customer hierarchies.
• Effectively navigates the customer’s hierarchical structure, establishing himself or herself as a trusted advisor at multiple levels.
• Focus on selling value-added solutions and managing customer contracting, compliance checks, and agreement renewals.
• Review sales pipeline, top-line revenue, and margin performance, initiating corrective actions as needed.
• Review and manage customer credit and payment in close cooperation with AMOS’ Account Receivables team.

Sales Planning & Review

• Attend regular review meetings with Head Of Sales (HOS).
• Review account pipeline (including RFQ’s), activities and performance using Salesforce (CRM).
• Review new opportunities, new business, loss business and new competition on a regular basis and take corrective actions, where applicable.
• Conduct monthly, quarterly, and yearly customer business reviews, ensuring well-prepared meetings with relevant stakeholders.
• Support HOS in ensuring minutes from Strategic Reviews are distributed to all relevant stakeholders and corrective actions are followed up.
• Escalate concerns or complaints to the HOS timely.

Opportunity Management

• Develop a personal network within the business sector and represent AMOS at events, obtaining market intelligence and enhancing visibility.
• Adhere to company processes and procedures and utilizes the Salesforce and other tools to document customer interaction, needs, and business projections.
• Use Salesforce for documenting customer interactions, needs, and business projections, ensuring effective customer retention and business development.

Collaboration and Transparency

• Collaborate cohesively with internal and external stakeholders to ensure customer satisfaction.
• Secure compliance with AMOS’ sales governance

Requirements

• Min. 5 years experience in business development and managing sales
• Min. 3 years of work experience in PPE and/or Safety Equipment
• Strong written, oral, and interpersonal communication skills
• Experience with Salesforce.com and SAP
• Bachelor's degree (or equivalent) from a 4-year university
• The ability to converse well in both English and Mandarin/Japanese/Korean (to liaise with the APAC-based clients) is preferred

If you're ready to take the next step in your Sales career, we encourage you to apply for this exciting opportunity. Click the "Apply Now" button below to submit your application.

Salary commensurate based on candidate's skill and working experience.

We regret that only shortlisted candidates will be notified.

SHANGHAI TCM WELLNESS is a beauty TCM located at the Heart of Jurong west market.

Our company have been in the beauty industry for over 15 years. Our clients are mainly from the neighbourhood with large customer base.

We offer a huge variety of hair services for our clients as well as other beauty services such as facial and TCM treatments.

We are expanding and our new shop requires new enthusiastic beautician who are not only outgoing but also a competent team player in order to work with other associates to promote wide variety of beauty packages and services to our customers.

We are looking for experienced MANAGER (Full-Time) to our growing family.

Basic salary + Commission

Basic requirements:

- 6 days work week
- Other ad-hoc duties instructed by the management

- Promote wide range of services and packages
- Excellent customer service and communication
- Hardworking and team cooperation
- Able to commute well with peers / a team player
- Able to speak basic Chinese and English to maintain good after-sales relationship with different racial clients. (Most clients speak English and Chinese only)
- Strong negotiation and selling skills, well groomed and presentable.
- Independent and self-motivated

- must have positive attitude and willingly to take new task and learn.

- Beauty / Facial knowledge

This is a newly created role and we are looking for candidate who has start-up experience in Ship Repair Mechanical functions.

Job responsibilities

• Leading the team of mechanical technicians and common contractors workers
• Oversees and support the execution of ship repair mechanical projects
• Set up and train the mechanical team of technicians to establish an effective,flexible and reliable support base

Job requirements

• GCE 'O' level or at least 5years of supervisory with start-up experience in Ship Repair industry
• Must be comfortable to work in shipyard environment
• Candidate with relevant working experience will be preferred

Responsibilities:

• To develop strategic, accurate and effective planning for production and materials
• Liaise with all levels of personnel to discuss the progress of the project and address any issues that arise
• Excellent problem solving skill

Requirement:

• Strong communication skill
• Time management and planning
• Work as part of a team or individually
• Experience in Production planning or Engineering with 3 years experiences will be an advantage
• Minimum Diploma or Degree holder
• Excellent in Microsoft Excel
• Able to start immediately is an advantage

• Preparation of Bills Of Quantities and cost estimation during tender and post contract for construction project

• Monitoring and updating project budget including cost control and forecasting all project related costs

• Procurement and negotiation with Subcontractors and suppliers to obtain the best prices and terms for tender and awarded Project.

• Preparation of Subcontract agreement including maintaining proper documentation.

• Certification and preparation of subcontractor interim payment certificate/ final account including maintaining accurate and proper payment records

• Familiar with construction condition of contract ie SIA and PSSCO

• Attend to tender briefing/site showround and project site meeting

• Experience on various construction project including residential, commercial, upgrading and A&A sites

• Proficiency with BIM, CAD and relevant quantity surveying takeoff software and tools

• Ability to work independently

Job Description:

• Manage the operational activities of the projects to be within budget so as to support the achievement of the sales and PBT target:

- Resources availability and reliability (eg; manpower, equipment, etc)

- Manpower capacity, competency and deployment

- Work productivity through effective management (eg; machine utilisation rate, time management, etc)

- Ensure compliance of SAC at sites

- Ensures that inspection activities are carried out according to standard methods

- Coach and guide staff on the job training

• Provide technical feedback and costing information to superiors and sales team for tendering and quotation process, which include:

- Evaluate/Decide the capacity and capability to undertake the project according to technical specifications and requirements (eg; site visit, study specifications, drawings and other requirements, etc)

- Highlight additional costing items where require for the tender or quotation

• Manage the project activities within the allocated budget and timeframe:

- Project task breakdown and schedules

- Resources and deployment

- Monitoring and tracking progress

- Review project reports

- Site visits and meetings

- Resolutions of complaint, issues and feedback.

• Review project progress/final claims for approval and invoicing
• Complete the project:

- Reinstatement work areas

- Project sign-off

Job Requirements:

• Formal education in Civil Engineering/Ground investigation and instruments installation
• Good knowledge of drilling operation
• Familiar with 5S and safety knowledge
• Knowledge in quotation and tender works
• Understanding of financial indicators
• Relevant safety certificate for project manager (compulsory)
• Registered Earthwork Supervisor (compulsory)

Happy Tutors Learning Centre is a Social Enterprise looking to offer the highest quality bespoke education services to every student in Singapore. We have 6 centres spanning the East and West of Singapore.

We are looking for passionate tutors who are keen to work with students and help them in their school curriculum. Our centre is focused on customised learning and the tutor needs to be able to adapt their teaching to different learning styles.

Details for Candidates

• 5.5 Days work week (1 Weekend inclusive)
• Weekday Timing: 1300 - 2130 Hrs
• Weekend Timing: 0930 - 1700 Hrs
• Part-time positions available

Job Scope

• Teaching students in assigned classes (about 30 hours a week)
• Create new learning material for the centre
• Assist in the centre operations in other matters
• Contribute to the learning programmes offered by the centre

Requirements

• Infallible work ethics
• Effective and positive communications is a must.
• Pleasant personality around customer, colleagues and students
• Have passion toward education and helping others
• Other industry experiences (if any)

Interested candidates please apply, vacancies are limited!

Lead Maintenance Engineer (HVAC & Purified Water Systems)

Our Engineers support internal and external manufacturing operations remain operational, continuously improve, and innovate. With our extensive range of facilities and environments, our Engineers have opportunities across many diverse areas including Biological, Chemical, Automation, Capital Projects, Maintenance, Safety, Process Development, Technical Services, Utilities and Validation.

Lead Maintenance Engineer (HVAC and purified water system)

In this role, you will:

• Act as Subject Matter Expert (SME) in IPT Maintenance team with in-depth knowledge in Purified water system, HVAC, and Electrical & Instrumentation.
• You will take ownership for the HVAC and purified water system day to day support and continues improvement.
• Experience in manufacturing in a GMP HVAC environment utilizing ISO 14644-1 classifications.
• Respond to BMS/EMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Lead Quality Risk assessment and develop a yearly trend for purified water system and HVAC system.
• Develop and implement maintenance program, preventive maintenance procedures and spare parts strategy for safe, reliable, and efficient operation of the systems/Equipment’s.
• Shape data-driven decisions that solve business challenges and deliver on desired outcomes and people experience.
• Drive innovation, every plant area is a model area using our Production System.

Key Responsibilities:

Safety & compliance

• Lead or support investigation, participate in trouble shooting and root cause analysis for various operational events, and ensure that all relevant engineering CAPA are completed within agreed timeline.
• Provide support and actively participate in the site expansion project related to the HVAC and water systems, ensuring compliance with the company’s requirements.
• Lead and manage change control on project activities or act as technical advisor for system modifications, capital projects and other identified plant improvement projects in line with defined specifications, budget, and qualification of facilities in accordance with site to approved procedures.
• Proactively review and challenge current activities to reduce safety risk for employees and quality risks for company’s products.
• Develop commissioning, qualification (IQ, OQ) activities are executed accordingly and in compliance.
• Maintain HVAC and Purified water systems are in optimum condition in compliance with Good Manufacturing Practice (GMP) & EHS requirements.
• Lead/participate in equipment failure troubleshooting and deviation investigations whenever required.
• Provide input during Basis of Design (BOD) and Detailed Design during large capital projects, applying good maintenance and reliability engineering principles whenever required.

Enhance and uphold maintenance quality.

• Implements technical solutions to improve equipment uptime and asset utilization through use of Continuous Improvement mindset (Lean methodologies)
• Supports Maintenance Lead to meet Profit Plan targets, optimize maintenance and product standard cost effectiveness in accordance with cGMP and Safety guidelines.
• Responsible for improving the reliability of equipment and maintenance processes by applying the principles of Reliability Centered Maintenance.
• Lead and perform Root Cause Analysis (RCA) for surfaced issues and implement a robust solution.

Operations excellence

• Plans, monitors, schedules, and implements measures on the Planned Preventive Maintenance Program and also ensures that the work is done in accordance with schedule and specification.
• Regularly review and revise maintenance program and procedures to increase equipment reliability, reduce waste and improve overall asset care process & cost efficiency.
• Work with Engineering & Safety, Health & Environment (SHE) to execute a 'reliability-centric’ maintenance plan.
• Share best practices and lessons learned with the objective of improving asset utilization.
• Undertake activities to support realization of production, maintenance and product cost effectiveness with emphasis on equipment reliability and maintenance expenses.
• Conducts Maintenance effectiveness / optimization reviews along with IPT maintenance leads/Engineers/Technicians.

Continuous Improvements (CI)

• Utilize Lean methodologies such as 5S, Standard Work, real-time problem solving (RTPS), to support execution of continuous improvement activities.
• Support the development of continuous improvement framework and work with the Maintenance team to identify opportunities.
• Compile and review data and develops action plans for critical HVAC systems and Purified water systems to improve reliability and reduce M&R cost.
• Identify water and HVAC system repair and replacement projects, plan and develop schedules, acquire materials, prepare budgets, and develop an RFC for job execution.
• Effective project management ensures that jobs are completed on time, within budget,

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Degree in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering.
• 5 to 8 years of maintenance work experience in Chemical, Semiconductor, aviation, oil & gas or Petrochemical industry.
• Analytical and Problems solving skill with regard to Purified water system and HVAC Systems
• Knowledge in HVAC and Purified water system operation and Maintenance principle.
• Experience in manufacturing in a GMP HVAC environment utilizing ISO 14644-1 classifications.
• Knowledge of various clean room standards across the Pharmaceutical Manufacturing Industry will be an added advantage.
• Familiar with Life cycle of the HVAC system (from design, operations, controls monitoring, maintenance and obsolescence management).
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Demonstrated use of Reliability analysis tools such as FME, RCFA, etc.

Professional Competencies

• Resilient and resourceful
• Good oral/written communication and interpersonal skills
• Continuous learning mindset
• Foster team collaboration
• Strong work ethics

Glam Salon is a beauty & hair salon located at the Heart of Jurong west market. Our parent company have been in the beauty industry for over 15 years. Our clients are mainly from the neighbourhood with large customer base. We offer a huge variety of hair services for our clients as well as other beauty services such as facial and TCM treatments.

We are expanding and requires new enthusiastic hairstylists who are not only outgoing but also a competent team player in order to work with other associates to promote wide variety of beauty / hair packages and services to our customers.

We are looking for experienced Hair Stylists (Full-Time) to our growing family.

(Basic Salary + Commission)Basic requirements:-

Able to do wash, blow-dry, all chemical works (Treatment, Colour, Rebonding/Perm).

- 6 days work week
- Other ad-hoc duties instructed by the manager
- Promote wide range of services and packages
- Excellent customer service and communication
- Hardworking and team cooperation
- Able to commute well with peers / a team player
- Able to speak basic Chinese and English to maintain good after-sales relationship with different racial clients. (Most clients speak English and Chinese only)
- Strong negotiation and selling skills, well groomed and presentable.
- Independent and self-motivatedWhat you’ll be doing:
- Provide all hair services (Cutting, Shampooing, coloring, highlighting, rebonding, perm, treatments)
- Promotion of packages
- Products sales
- Managing bookings and welcoming clients into the store (All staffs required)
- Perform scalp treatments

- 3 to 6 years of experience in same field.

Company Overview:
Glam Salon is a subsidiary company of our parent company which was established since 2002. We are a professional beauty salon that caters to individuals from all walks of life, from children to elderly. We strive to help our clients reach their desired needs and giving them the confidence as they leave our shop with satisfaction.