RESEARCH AND DEVELOPMENT CHEF Job description

The Research and Development (R&D) Chef creates new recipes to improve food product from the organisation. Ready to designs new recipes in consideration of ideas and market demand for new products. Ready to improves recipes and preparation methods to meet mass production and regulatory needs. Ready to helps to design marketing strategies based on candidate approach and ideas in creating new products.

Candidate should skilled in culinary arts and is experienced in the Food and Beverage (F&B) sector. Candidate works in a kitchen or laboratory. Candidate has good knowledge on food science and is familiar with nutrition and mass production needs. Candidate has sound understanding of cultural and culinary trends. Candidate is very creative in developing and presenting products.

Duties and Responsibilities

• Assist in data gathering for new product specifications.

• Confirm product formulations and other information for constructing product profiles.

• Create new recipes and refine taste profiles through experimentation.

• Develop ideas from food preparation processes for marketing purposes.

• Develop product improvements based on sensory testing and consumer data.

• Establish product specifications and documentations.

• Make recommendations in the design of new manufacturing processes or to change current equipment or processes.

• Modify new product recipes and ingredient selection while taking note of nutrition, shelf life and regulations.

• Plan, manage and run panel sessions and sensory tests on food products.

• Refine recipe formulation for mass production purposes.

• Review ingredients to meet customer needs and requirements.

• Review methods to improve quality of new food products and compliance with food regulations during mass production.

• Suggest alternative ingredients and food preparation processes to meet mass production and compliance needs.

• Suggest changes to new food production processes.

• Support sales team by preparing samples for local and overseas customers.

• Troubleshoot production processes to resolve production, quality and regulatory compliance issues.

Requirements and Qualifications

• Strong knowledge of food science and nutrition.

• Excellent culinary skills and creativity.

• Ability to work well under pressure.

• Strong communication and presentation skills.

• Detail-oriented with strong organizational skills.

• Ability to conduct thorough research.

• Proficiency in using kitchen equipment and tools.

• Knowledge of food safety regulations.

• Ability to work independently and as part of a team.

• Strong problem-solving skills.

• Willingness to stay updated on industry trends.

• Experience in training and mentoring staff.

• Ability to source and evaluate new ingredients.

• Degree or Diploma or minimum three years relevant work experience

• Able to work early mornings, nights, and weekends

Head Chef Job Description

As a head chef you will be responsible for everything that goes on in your employer’s kitchen. Not only will you be required to oversee all dishes from start to finish, you are also tasked with hiring and firing employees, meeting health and safety standards and dreaming up new recipes for the restaurant you work in.

If you love to cook, enjoy being creative and relish the challenges that come with responsibility, read on to learn more about becoming a head chef.

Requirements

A candidate who wants to become a head chef must acquire on the job training which is most important for career progress and advancement in the path of becoming a head chef.

A head chef must possess a lot of stamina and will power to be able to stand for long hours and work for extended hours too in order to experiment in creating new dishes.

The candidate should also possess good knowledge of food products and their availability in order to plan cuisine accordingly.

A head chef should have good organizing, supervising and time management skills to be able to oversee all the activities that take place in the kitchen in a proper manner.

FOOD PRODUCTION MANAGER Job description

Our company is seeking an experienced food production manager to oversee our food production operations. The ideal candidate will have extensive experience in managing staff, overseeing production processes, and ensuring the highest standards of food safety and quality.

Be sure to list the daily tasks, such as supervising production, managing inventory, and overseeing quality control, and other key duties. You will oversee delivery and development of the food offer and services, both in the restaurants and hospitality services supporting commercial initiatives, innovation, and team development.

Duties and Responsibilities

• Develop, implement, and maintain production schedules and processes to ensure optimum productivity and efficiency

• Hire, train, and manage production staff, including setting and monitoring performance goals

• Collaborate with sales and marketing teams to develop and implement product launches

• Create and maintain inventory records and manage raw material inventory levels

• Ensure compliance with all food safety regulations and industry standards, including HACCP

• Identify and address production issues and area(s) for improvement

• Monitor and maintain equipment and machinery in production facilities

• Prepare production reports and communicate with upper management regarding production goals and results

• To ensure the prompt and efficient preparation and service in all food areas to the company’s standard and to the customers’s satisfaction.

Requirements and Qualifications

• Ready to work any shift

• Able to work in a fast-paced environment

• Able to multitask, prioritize, and manage time efficiently

• Physical endurance to stand for an entire shift

• Self-motivated and self-directed

• Works well as part of a team and on individual tasks

• Able to quickly memorize complex or multiple orders

• Degree or Diploma or minimum three years relevant work experience

• Able to work early mornings, nights, and weekends

• Ability to work effectively as part of a team

1. Able to cook- at least heat up food minimum.
2. Must be pleasant and neat.
3. Able to handle and cook BEEF, PORK, LAMB VENISION, DUCK and CHICKEN products.
4. Able to converse in English and Mandarin.
5. Able to be flexible and work island wide.
6. Able to sell the products on promotion and count the no. of packets sold on a daily basis. (Forms will be provided)
7. Working hours- Off Weekday.
8. Working hours- 9.00am to 6.30pm, unless otherwise specified.

• Basic Salary - $2000
• Attendance allowance - $100
• Gross up to $3000 (Outlet KPI Incentive + Flexi Benefit)
• 5 days work week, Retail hours (8 working hours + 1 hour break)
• Working location: Central / West

Job Scope & Requirements:

• Promote skincare/makeup/haircare products.
• Provide skincare consultation and product demonstrations to customers.

Kindly WhatsApp to +65 8288 5668 or Email to "[email protected]"

EA Reg. No: R1880058 | Dylan

EA License No: 15C7752

Job Description

1. Upload invoices to CRM system
2. Sorting incoming letter, and post letter & invoices
3. Issuing company cheques
4. review and monitor sales pricing, ensuring that the prices of all products sold are not lower than the purchase cost.
5. Filling for all necessary documents
6. To do the job assign by manager and director

Requirements

• Minimum O level or equivalent
• Minimum 1 year’s working experience as office administration
• Proficiency in Microsoft Office
• Able to work independently with minimum supervision
• Able to start work on short notice preferred
• Training and guidance will be provided

Other Information:

• Medical Benefits
• Leave Benefits
• Providing Transport
• Working Location: Tuas
• Working hours: Monday - Friday (8.30am to 5.30pm), Saturday (8.30am to 3.00pm) Alternate, 1 or 2 days a month)

Company Overview:
We are a leading company in the renewable energy sector, specializing in the manufacturing and supply of high-quality cables, devices, and accessories designed to support electric vehicle (EV) charging infrastructure. Our mission is to drive sustainable energy solutions and contribute to the growth of clean technologies.

Role Overview:
We are seeking a highly motivated HR & Finance Assistant Manager to support the financial, HR, and administrative functions of our growing organization. This position plays a key role in streamlining processes, maintaining compliance, and ensuring the smooth operation of financial and HR activities within the company. The ideal candidate will have a strong background in finance and human resources, with the ability to manage day-to-day operations in a dynamic and fast-paced environment.

Key Responsibilities:

Finance:

• Lead financial planning, budgeting, and forecasting processes to ensure alignment with company objectives.
• Oversee the preparation of financial reports and analyses for all divisions within the company.
• Ensure strict compliance with accounting principles, tax regulations, and industry standards.
• Develop, implement, and monitor financial policies and procedures to safeguard company assets and ensure operational efficiency.

Human Resources:

• Manage the end-to-end recruitment process, from sourcing to onboarding new employees.
• Develop and implement HR policies and procedures that align with industry best practices and legal requirements.
• Handle employee relations, performance management, and conflict resolution to maintain a positive and productive work environment.
• Oversee payroll processing and benefits administration, ensuring timely and accurate compensation for all employees.

Administrative Support:

• Assist the Sales team in preparing detailed sales and service quotations for clients.
• Coordinate logistics activities, including scheduling collections and deliveries, to meet customer requirements and ensure timely service.
• Provide pre-sales and after-sales support by working closely with the Sales, Service, and overseas teams to address customer needs and inquiries.
• Process sales orders efficiently to ensure smooth operations across departments.
• Perform general administrative duties as required, including filing, documentation, and reporting.
• Assist with ad-hoc office tasks to support the overall operations of the business.

Qualifications & Skills:

• Bachelor's degree in Finance, Business Administration, Human Resources, or a related field.
• Proven experience in HR and finance roles, preferably within the renewable energy or technology sectors.
• Strong understanding of accounting principles, financial reporting, and HR best practices.
• Excellent organizational and time-management skills with the ability to prioritize and handle multiple tasks.
• Proficiency in HR and finance software, as well as Microsoft Office Suite (Excel, Word, PowerPoint).
• Strong communication and interpersonal skills, with the ability to collaborate across departments and with external stakeholders.
• Detail-oriented, proactive, and able to work independently in a fast-paced environment.
• Experience in the renewable energy or EV charging industry is a plus.
• Knowledge of relevant industry regulations and standards.

As an API Functional Business Analyst, you will serve as a key liaison between technical teams and business stakeholders in the successful delivery of API solutions. Your role will involve gathering, analyzing, and documenting requirements to enhance our API offerings, ensuring they meet the business needs and comply with industry standards.

Key Responsibilities:

• Gather and document business requirements for API functionalities from stakeholders.
• Payment Experience is must
• Translate business requirements into functional specifications for technical teams.
• Conduct analysis of existing APIs and provide recommendations for improvement.
• Collaborate with developers to ensure understanding and execution of requirements.
• Define API testing strategies in coordination with the testing team.
• Facilitate discussions on API design, usability, and performance with stakeholders.
• Monitor API performance and propose enhancements based on user feedback and data analysis.
• Maintain comprehensive documentation, including API specifications, user guides, and training material.
• Stay updated with industry trends and best practices regarding API development and implementation.

Qualifications:

• Bachelor's degree in Computer Science, Business Administration, or a related field.
• Minimum 5 years of experience as a Business Analyst with a focus on APIs.
• In-depth knowledge of API technologies, standards, and best practices (e.g., REST, SOAP, JSON, XML).
• Strong analytical skills with the ability to interpret complex data and translate it into actionable insights.
• Experience working with cross-functional teams and translating technical concepts for non-technical stakeholders.
• Excellent communication, documentation, and presentation skills.
• Familiarity with Agile methodologies is a plus.
• Passion for technology and a keen interest in improving business processes through API solutions.

THE ROLE 

As our Marketing Lead, you can choose to work on-site at our Singapore office or remotely, with occasional travel to Singapore as needed. In this role, you will spearhead our global marketing efforts to expand Digify’s presence and engage key audiences. You’ll be responsible for developing and executing marketing strategies across product marketing, lead generation, content marketing, and social media. 

WHAT YOU’LL BE DOING 

• Develop and refine a global marketing strategy for Digify. 

• Lead and mentor a team of three marketers to execute the strategy effectively. 

• Establish and track marketing KPIs, ensuring objectives are met consistently. 

• Deeply understand the Digify product, its users, competitors, and market dynamics. 

• Create compelling product positioning and messaging that differentiates Digify. 

• Identify new opportunities to reach key markets and expand market share. 

• Manage lead acquisition funnels and nurture prospective customers. 

• Leverage data to inform evidence-based marketing decisions. 

• Develop and execute targeted campaigns to accelerate growth. 

• Regularly review and optimize marketing strategies for continuous improvement. 

• Plan and manage quarterly and annual marketing budgets, collaborating with finance and leadership for alignment. 

• Work cross-functionally with Sales and Customer Success to implement effective sales enablement resources. 

• Minimum 5 years of B2B marketing experience, with at least 3 years in a leadership role in the SaaS sector. 

• Near-native or native-level proficiency in English (spoken and written). 

• Proven success creating and executing growth-focused marketing strategies. 

• Strong understanding of lead generation, content marketing, and social media. 

• Experience managing a small marketing team, fostering professional development and performance management. 

• Demonstrated ability to position and grow SaaS products globally. 

• Strong analytical skills to interpret data and drive decision-making. 

• Excellent communication and stakeholder management skills. 

• Willingness to travel to Singapore on occasion if working remotely. 

· Planning and scheduling of site works.

· Monitoring work progress.

· Directed all necessary day to day Site activities.

· Supervising the structural (RC & Steel Structure) and architectural work.

· Coordinate work with M&E contractors.

· Checking reinforcement of slab, beams & other structural elements prior to joint inspection with QPS.

· Perform site inspection, liaise & coordinate with RE/RTO.

· Quality analysis and control of works.

· Implementation of safe work environment.

· Coordinated with subcontractors ensuring their work met project specifications as well as monitored their progress towards completion deadlines.

Job Description:

We are seeking a dynamic Sales Executive to join our team. This pivotal role involves managing your Sales Channel and reporting directly to the General Manager.

As a Sales Executive, you will spearhead the development of an effective sales strategy aimed at expanding existing accounts while identifying and capitalizing on new channel opportunities to drive incremental sales.

Responsibilities:

• Strategize: Develop and implement robust sales strategies to foster growth within existing accounts and explore avenues for new business development.
• Customer Focus: Cultivate enduring relationships with customers, emphasizing long-term partnerships and understanding their evolving needs.
• Feedback Management: Handle customer feedback with professionalism, utilizing it as a means to enhance service and offerings.
• Team Collaboration: Work closely with the sales team, collaborating seamlessly to achieve collective sales objectives.

Requirements

• Minimum Poly Diploma in Marketing / Business Studies or any related field is preferred.
• Candidate without prior experience are welcome. While sales & marketing experience in the FMCG sector and hold a success track record are preferred.
• Computer literate and possess good interpersonal and communication skills.
• Good team player with excellent customer service attitude and dynamic.
• Self-motivated to work independently.
• Positive attitude and must be meticulous, organised and reliable.
• Good command of English (Verbal and Written) is a plus.

Other Information

• Job Type: Full Time, Permanent
• 5.5 working days
• Immediate position

Join our team and become an integral part of a collaborative environment that values both customer dedication and team success.

Job Responsibilities:

• Responsible for liaising with Engineering team on technical drawings, layout and clients specifications, clarifying system isometric drawings, equipment foundation drawings, drawing of parts, material lists and additional drawings for production support
• Prepares planned schedule for logistic and manpower arrangements under the supervision of senior team members and responsible for the product hierachy in outfitting installation
• Performs supervision on site to ensure outfitting installation work have been safely and appropriately executed according to the arrangement and coordination plans and sequence in outfitting production
• Coordinates with other production team members, subcontractors and consultants to resolve technical issues on-site which affect the outfitting schedule and project deliverables
• Liaises with QA/QC, owners, statutory and classification authorities for completed outfitting installation inspection and acceptance (i.e.piping systems, HVAC, electrical cabling, fitting equipment and equipment foundation) to sign off completion
• Performs on-site checks on the recorded checklists, ensuring the information is accurate and generates reports on work progress for senior team members’ review
• Maintains a high level of efficiency, ensuring good housekeeping, resource optimisation and effective material management to continuously improve the execution of outfitting scope of work
• Continually improves and implements safe work environment, efficient and effective methods for reducing project man-hours, costs and improving schedule
• Identifies, trouble-shoots problems and performs root cause analysis study on recurring cases of defects by resolving to corrective and preventive measures to improve process performance
• Works with other Production team members as required to achieve functional objectives and deadlines
• Provides support in various projects as required to promote cross-functional learning and development, balance team workload and enhance overall team productivity
• Incorporates HSEQ work cultures and best practices to ensure the successful implementation of HSEQ management systems
• Maintains and executes HSEQ procedures, policies and programmes and drives continuous improvement through risk-based thinking and analysis
• Supports the conduct of HSEQ management system audits to ensure compliance with legislations and company policies

Job Requirements:

· Bachelor’s degree in Marine/ Mechanical Engineering, or related engineering disciplines

· 3 years of working experience in planning and construction of outfitting scope of work in the oil and gas industry

· Experience in engineering outfitting activities in marine engineering projects

· Excellent proficiency in English (written and spoken)

· Knowledge and experience in the interpretation of outfitting diagrams, general mechanical drawings and its elements to deliver class approved documents and drawings

· Knowledge of engineering analysis techniques and tools/software applications (i.e.3D modeling software such as Cadmatic or Aveva Marine etc.)

· Familiar with material and equipments (i.e.main engine, generator, pump, deck machinery, mooring equipment, switchboard, etc.) used in outfitting design

· Some knowledge and experience in site inspection standards, class rules requirements and industry codes

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

PRODUCTION SUPERINTENDENT

The Job

· Effective management of the production operations.

· Ensure effective and efficient use of materials, manpower, machines, and equipment so as, to minimize wastage, reject downtime, and reworks.

· Implement quality, safety, and environmental policies to comply with company and statutory regulations.

· Continually seek to improve productivity by recommending and initiating policies, producers, and methods.

· Meet or exceed customer requirements, not limited to quality standards and delivery.

· Performs other duties as assigned.

Requirements

· Degree/Diploma in Chemistry or Chemical Engineering

· 2 – 3 years relevant experience in chemical manufacturing.

· Working knowledge of ISO, OHSAS, and Halal standards.

Interested applications are to e-mail your detailed resume indicating present and expected salary to :

The Advertiser

E-mail: [email protected]

Only shortlisted candidates will be notified.

• Preparing / catering of all necessary documents for submissions.
• Processing work orders, delivery orders,paperwork, etc.
• Monitoring and managing all phases of projects development and schedules.
• Coordinate and building good rapport with the clients.
• Ensure proper tracking and reporting of projects development.
• Work as assigned.

Job Requirements:

• Preferably 3 years experiences in construction field
• Proficient in microsoft wors,excels.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

We are a professional tuition center looking for a talented designer to join our team. The successful candidate will handle promotional designs, provide creative support, and assist with administrative tasks to enhance our brand and services.

Job Responsibilities:

1. Create Promotional Materials: Design posters, banners, and social media graphics to promote courses and enhance brand awareness.
2. Multimedia Content Creation: Produce short videos and graphics for event promotion and teaching demonstrations.
3. Social Media Management: Create and publish engaging images and videos on platforms such as Facebook and Instagram to increase brand visibility and engagement.
4. Copywriting Collaboration: Assist in drafting or refining promotional copy and producing educational content.
5. Support Teachers: Help beautify and enhance teaching materials to improve the learning experience.
6. Administrative Support: Assist with various administrative tasks to support the smooth operation of the center.
7. Other Design Tasks: Complete additional creative design tasks assigned by the team.

Job Requirements:

1. Proficient in the following design and video editing software:Photoshop
   Canva
   Video editing tools (e.g., Premiere Pro, CapCut, etc.)
   
2. Experience in creating and managing content for social media platforms such as Facebook and Instagram.
3. Strong graphic design and layout skills, with a solid understanding of promotional needs in the education industry.
4. Basic copywriting skills to create or refine simple text content.
5. Creativity and the ability to propose design solutions tailored to specific needs.
6. A team player with strong collaboration skills, able to accept feedback and deliver high-quality work efficiently.
7. Detail-oriented and organized, with the ability to handle design and administrative responsibilities effectively.

Working Hours:

• 5 days per week:Tuesday to Saturday: 10:00 AM - 7:00 PM
  Off on Sunday and Monday
  

Salary:

• Negotiable based on experience and skills.

Work Location:

• Singapore (specific location: JURONG EAST)

• Teaching Experience: Minimum of three year of teaching experience.
• Competitive Rates: $5k-$6.5k, depending on your experience.
• Capable of editing teaching materials according to PSLE and O-level requirements. Familiar with Singapore PSLE and O-level regulations.
• Expertise in preparing materials and delivering impactful in-person lessons.
• Skillful engagement with students in a classroom setting, fostering a positive learning atmosphere.
• Adapt teaching methods to accommodate varying learning styles and levels of ability.
• Clear articulation of techniques and concepts, enhancing understanding and mastery.
• Skillfully maintain classroom discipline and manage learning dynamics for optimal outcomes.
• Exhibit patience and empathy while guiding students.
• The working hours are five days a week (Mon-Fri) from 12:00 to 20:30. Additional compensation is provided for working on weekends if scheduled off on Saturday or Sunday.
• Requirements: A graduate degree or above.
• Proficient in using both Chinese and English.
• Work location: Blk 130 Jurong Gateway Rd (S600130)

Be a valued part of our team of dedicated educators at OX-KIDS. If you're passionate about teaching English, and you're committed to shaping young minds through quality education, apply now to join our mission!

Main duties and responsibilities :

1. Incoming QA(IQA) and Outgoing QA (OQA) Inspection
2. Quality Wall (QW) buy off
3. Weekly process audit
4. Non Conformance Material Report (NCMR)

Experience and knowledge :

1. Min "O” level with 3 years of related experiences in a manufacturing environment.
2. Knowledge of Microsoft (words, excel and ppt) is a must.
3. Knowledge of Stamping, Plating, Molding and Connector Assembly is an added essential.

Skill Required :

1. Good knowledge on measurement methodology and equipment (profile projector, TM scope, OGP smart scope).
2. Exposure in Process and QMS Audit.
3. Knowledge of Quality tools such as SPC and 7 QC tools.
4. Good interpretation of product drawing, specification and Inspection Plan.

Job Requirement :

1. Able to work independently
2. Able to work rotation shift

Job Functions:

• Handle tender administration
• Source and prepare all information and documentation related to tender submissions, for participation in tender exercise
• Prepare bill of quantities which involves quantity take-off, materials sourcing, and measuring
• Obtains, compiles, and evaluates quotations from sub-contractors and suppliers according to tender requirements, and follows up on timely submission of quotations
• Handle contract administration
• Source and negotiate for sub-contractors and supplier terms and fees in compliance with requirements and time schedule
• Carry out procurement functions in an ethical manner
• Assist in administration of Extension of Time claim
• Prepare Letter of Award and work orders
• Prepare interim progress claims, Variation Orders, and final account with clients
• Certify interim progress claims and final accounts for payment to sub-contractors

Job Specifications:

• Min qualification: Diploma in Quantity Surveying or construction-related discipline
• Minimum 5 years’ work experience in a Quantity Surveyor role, preferably experience in M&E
• Good contractual knowledge and administration
• Meticulous and detail-oriented
• Good organisation skills, and able to multi-task
• Good written communication skills in English
• Strong communication and negotiation skills
• Ability to work independently, and under pressure, to meet deadlines
• Able to coordinate/communicate with project team

The Opportunity:

Responsible for providing supervision of inspection process and staff. Ensure staffing levels and work assignments meet facility requirements. Assist in the administration of the Quality Assurance (QA) and Quality Control (QC) programs and ensure compliance with the Quality Manual as well as all applicable regulations and standards for which Therapak/VWR is certified to. Perform acceptance activities as required to ensure Company objectives are met. May provide oversight to lower-level supervisor(s).

What we are looking for:

• Bachelor’s degree in chemistry, Biology, Biochemistry or science related field
• 5 years of related/applicable lab experience; minimum 1 year of supervisory experience
• Required language(s): English
• Required Skill(s): MS Office (Words, Excel and Access)
• Ability to work in a team environment
• Ability to identify and resolve issues
• Ability to lead a team and provide guidance
• Strong decision-making and communication skills
• Strong interpersonal and organizational skills

How You Will Thrive and Create an Impact:

Supervision of QC Associates

• Directly supervises the quality control associates, monitor individual skills, technique and abilities for most efficient operation.
• To follow progress of work; anticipate or investigate delays or inadequate performance by taking corrective action within limits of established practice and aid other departments as needed.
• Provides on the floor and technical support to quality control associates with guidance and improve the quality system, regulatory policies and procedures.

Drive QC Operation and Laboratory Operational Excellence

• Support and enforce the quality management system related to QC, regulatory policies and work instructions.
• SAP account holder for method creation, support QC data input and release, inspection plans and reports creation to ensure the process flow is smooth.
• Oversee quality and quantity of all QC laboratory output and testing timelines by monitoring testing duration, arrange for equipment, materials and supplies to be available for QC testing
• Oversee that equipment is given proper care; troubleshoot faulty operations to determine cause and arrange for required repair and maintenance which could affect operational testing needs

Drive continuous QC training and development

• Provide or arranges for training and cross training to employees in the performance of duties by assisting and instruct personnel as necessary to insure proper flow of work through department.
• Provide guidance to all level Technicians including test methods, analytical technique, good laboratory practice, paperwork completion, equipment, schedule interpretation, and LIMS support.

Maintain QC Document Control and lead in investigation

• Review and approval of controlled Quality Control documents including but not limited to specifications, procedures, work instructions, validation protocols, equipment software audit trials, stability worksheets, data integrity logs and validation reports.
• Ensure department documents and procedures are up to date and reflect current practice; revising procedures & processes when needed.
• Performs investigations for laboratory out of specification (OOS), out of trend (OOT) questionable results, quality event, CAPA and complaint related to testing, safety related incidents and/or processes related to the QC laboratory.

Maintain Quality, Regulatory and Safety Compliance

• Understands regulatory requirements for 21 CFR 820, ISO 17025, EXCiPACT, GLP, GMP including USP/EP/BP/JP/ChP general practices and procedures.
• Proactively maintains current industry and regulatory knowledge for medical devices, ISO 17025, GMP principles and current analytical methodology.
• Enforce prescribed local safety rules and regulations related to QC laboratory; insure that work areas are maintained in a neat and orderly condition in the work environment; to perform safety and security procedures to open and close buildings and facilities.

Customer Centric

• Work with external customers, regulatory agents and vendors during audits and site visits.
• Work and collaborate with internal stakeholders to insure successful visits and audits

QC Decision Making for Operation

• Assist in determining priority of urgent items and appropriate action plan to effectuate priority.
• Drive all QC decision making in approve rejections and rework actions as recommended by Quality Control Technicians.

Additional Assignments

• Performs other duties and ad-hoc projects as assigned to drive growth, operational excellence and organization goals.

ABOUT THE NATIONAL INSTITUTE OF EDUCATION (NIE)

The National Institute of Education (NIE), Singapore, is Singapore’s national teacher education institute and we are proud to be an integral part of the nation’s education service. We play a key role in the preparation of teachers and in the provision of teacher professional and school leadership development programmes. We are committed to our vision of being An Institute of Distinction: Leading the Future of Education and our mission to Inspire Learning, Transform Teaching and Advance Research.

NIE invites applications for an Executive position in the Finance Department.

Responsibilities

You will be part of the team which handles undergraduate billing and other student-related financial matters for the institute. Your responsibilities will include:

• Billing for undergraduate courses, hostels and facilities.
• Checking that all payment transactions have appropriate certification and approvals before being processed for payments.
• Responding to enquiries pertaining to facilities and student matters.
• Assisting in the design, implementation and review of financial processes, policies and guidelines for continuous improvements, through streamlining and automation.
• Participating in system implementation, enhancements, and user acceptance testing.
• Handling ad hoc duties as assigned.

Requirements

• A Polytechnic Diploma in Accountancy or its equivalent.
• At least 2 years of financial administration and accounting work experience.
• Good organizational and communication skills.
• A positive attitude and willingness to learn and adapt, with problem-solving skills.
• An effective team player with the ability to work independently is preferred.
• Ability to prioritize and plan work activities in an organized manner, able to multi-task, track and deliver assignments on schedule.
• Self-motivated, energetic and results oriented.
• Proficient in Microsoft Office applications, especially Microsoft Word and Excel.
• Experience in SAP and Ariba would be an added advantage.

Other Information

NIE staff can take chartered buses at their own expense from or near their homes to NIE campus. This is subject to the availability of seats.

Closing Date: 20 January 2025

We regret that only shortlisted candidates will be notified.

Mission/purpose of the Job:

• Responsible for vehicle repair, diagnostic, service maintenance.
• Ensure all assigned jobs are carried out according to UD/Volvo Quality Standards.

Key responsibilities/Accountabilities:

• To perform all basic troubleshooting and basic diagnostics with appropriate recommendations (With guidance from Team Leaders where appropriate)
• To check and provide correct recommended Parts details in the Work Order as and when required.
• To carry out Service Maintenance on the trucks including:

- Power Steering Diagnostics and Repair

- Engine Overhaul

- ESCOT Control Housing Overhaul

- ESCOT Gearbox Overhaul

- Rear Axle Overhaul

- Advanced Multimeter Measurements and Wiring Repair

- Emission Related System

- Fault tracing and repair electrical system via Tech Tool test, Calibrate and programming

• To perform all repairs (Mechanical, Electrical, Electronic etc)
• To ensure Utilization, Efficiency and Productivity is achieved.
• To record repair time and detail of repair in the Work Order.
• To keep Team Leader updated on the repair details and repair requirements.
• Adhere to Warranty Process and Procedures (Warranty tagging of parts, return and storage of warranty parts etc).
• Ensure good housekeeping of work bay.
• Accountable for all tools and equipment handling and usage.
• Ethical compliance of genuine parts replacement and service rendered according to the checklist and scope of works.
• Ensure all service and repairs are performed thoroughly and in accordance to good quality practice and procedures adhering to manufacturers standard 4 (Singapore).
• Lead by example to ensure high level of Health & Safety performance within the area of responsibility.
• Attend upgrading courses as and when available.
• To attend to breakdown where necessary and to be equipped with a valid Class 3/4 driving license.
• Adhere to UD/Volvo processes and policies.
• Any other duties assigned by your immediate superior.

Essential educational and/or training qualifications and certificates

• NITEC in Automotive Technology or former NTC 3/2 in Motor Vehicle Mechanics or NTC 3/2 Heavy Duty Diesel Mechanics or Diploma in Automotive Engineering or related field.
• Preferred with valid Class 3 / 4 / 5 driving license (Singapore).

Preferred experience and knowledge

• Minimum of 4 – 6 years working experience in servicing and repairing heavy trucks (Japanese and Continental brands).
• Basic Vehicle Principles and Concepts.
• Advanced engine, transmission and brake system knowledge.
• Multi-meter basic electrical values.
• Knowledge in vehicle electrical circuit diagram.

Necessary technical/functional/language skills

• Basic Hydraulics
• Power Steering Diagnostics & Repair
• Brake System & Diagnostics
• Diesel Engine
• Electrical Wiring Repair
• Multimeter Advanced Measurements
• Engine Overhaul
• Emission Related System
• Preventive Maintenance
• Transmission check and adjustments
• Rear Axle Overhaul
• ESCOT Gearbox Overhaul, Control Housing Overhaul, Voith Retarder Overhaul
• Telematics
• Compressor cooling basic
• Computer skill
• Completed Curriculum and related Assessment for Technician Level III –Service & Basic Repair

Job Responsibilities

• Developing and designing network architecture and computer systems infrastructure.
• Overseeing the development, installation, and administration of computer systems.
• Monitoring computer systems and networks for viruses, malfunctions, and errors.
• Analyzing network data and infrastructure to determine inefficiencies and problems.
• Plan, design and manage AWS cloud implementations.
• Evaluate cyber security posture and recommend improvement.

Job Requirements

• Bachelor’s degree in Computer Science / Information Technology / or similar field.
• Solid working knowledge of networking (e.g. CCNA), Windows Domain, Office 365 administration, AWS cloud technologies and network security.
• At least 3 years of systems and network engineering related experience.
• Good communication skills in English.
• Good communication skills in Korean will be an added advantage