The work scope for the above job title is as but not limited to the following:

1 The main task of the Driver is to drive the Company’s heavy vehicles to and from the different work sites as required by the work schedule. The heavy vehicles include lorry crane and tipper truck.

The Driver must drive the vehicles to the required work sites punctually.

The Driver must follow the schedule obtained from the Site/ Store Supervisors and Co-ordinator. The Driver must inform the parties involved if there are any clashes in schedule before proceeding.

The Driver must inform the Site/ Store Supervisors and Co-ordinator as soon as possible if he is delayed in his schedule. This will enable them to plan their resources efficiently.

2 Usage of Company vehicles

The Driver is to switch off the ignition completely and remove the key when the vehicle is parked and not in use. The Driver must not leave the vehicle in idle mode while waiting.

The Driver must understand that the Company’s vehicles and attached cash cards are solely to be for Company use. If the Driver uses the cash cards for personal use ie lunch parking fee, the Driver must reimburse the Company.

3 Safety

The Driver must drive and operate the vehicles in a safe manner in accordance to local laws.

If there are loads on the vehicles, the Driver must ensure the loads are properly secured in accordance with local laws and regulations.

The Driver must inform the Project Director immediately he is involved in an accident while driving or operating the vehicle. This includes causing damage to third party property.

The Driver should understand that if the accident is caused by the Driver’s negligence, the Company is entitled to pursue part or all of the claims from him.

The Driver should also understand if he incurs any traffic offences due to his own negligence, the Company is entitled to pursue part or all of the claims from him.

4 Servicing and Maintenance

The Driver is to inform the Company if any of the vehicles are unsafe to operate and require repairs. The Driver must not operate the vehicles in such situation.

The Driver will drive the vehicle to the Company appointed workshop for servicing and maintenance. The Driver will also pick up the vehicle when servicing and maintenance is completed.

The Driver will drive the vehicles to Inspection Centres as required.

Requirements:

• Class 4 Singapore Driving licence.

• Willing and able to do a lot of night jobs or do night shift as well as day shift. Night shift could be for more than 3 months at a time depending on project.

• Saturday is full day and able to work on Sundays when required.

• 2-3 year experience driving tipper truck with good track record

We are looking for Corporate Specialist to join our fun and fast growing team. This role will handle the day to day office administration work.

Job Description :

• To support daily office and administrative related matters.
• Liaise with relevant stakeholders to work on collating reports for local and overseas office.
• To provide support for servicing and maintenance of office equipment such as printers and air-con etc.
• To liaise with vendors on corporate gift supplies to ensure enough stock for events.
• Provide administrative and secretarial support to CEO as and when needed.
• Assist to coordinate company team-bonding activities as and when required.
• Issuing of company items to new staff such as company shirt, cap and SIM card.
• Administer grant application on government platform.
• Ad-hoc duties assigned by management.

Requirement:

• Diploma in Business Administration or related field.
• Preferably 2 years of relevant work experience.
• Good communication skills and able to work independently as well as in team.
• Possess strong administrative and organizational skills.

Interested applicant can click on 'Apply' or send updated CV to [email protected]

Job Description:

The Project/Site Engineer will assist in the supervision and coordination of Electrical & Control systems for construction projects. The role involves monitoring project progress, managing resources, and ensuring quality standards are met. The engineer will work closely with internal teams, clients, subcontractors, and suppliers to ensure timely project execution and compliance with technical requirements.

Responsibilities:

• Supervise and assist in the execution of Electrical & Control system works on-site.
• Coordinate project planning, documentation, and execution.
• Monitor project progress, manpower mobilization, and material planning.
• Liaise with internal teams, clients, subcontractors, and suppliers to resolve issues.
• Conduct site inspections and ensure quality control.
• Manage the preparation and submission of method statements, shop drawings, and other required documentation.
• Report to the Project Manager (PM) or Construction Manager (CM).

Requirements:

• Diploma or Degree in Electrical Engineering or related field.
• 1-5 years of experience in construction projects.
• Strong communication skills and ability to collaborate across departments.
• Knowledge of project management processes.
• Experience in wafer fabs or pharmaceuticals is a plus.

• Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.
• Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team.
• Interacting with clients, interpreting their needs and requirements, and representing them in the field.
• Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.
• Cooperating and communicating with the project manager and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.
• Reviewing the engineering tasks and initiating the necessary corrective actions.
• Developing specifications for the project's needed equipment.
• Creating frameworks to measure the project's metrics and data collection.
• Establishing field test methods and methods for monitoring the quality of those tests.
• Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Responsibilities:

• Ensure well-being of children at the centre especially safety and hygiene
• Prepare and organise teaching activities according to lesson plans
• Create a safe and fun environment for the children to learn and play
• Maintain and liaise closely with parents on children's development
• Conduct observation and assessment on children's learning progress

Requirements:

• DECCE or its equivalent
• L2 Certificate from ECDA
• Basic computer skills

Benefits:

• Annual Leaves, Birthday Leave etc.
• Bonuses and Incentives
• Sponsorship for training and teaching qualification
• Sign-on Bonus of up to 1 month* (terms and conditions apply)

We regret that only shortlisted candidates will be notified.

• Responsible for testing construction materials at the Engineering Materials Laboratory, performing physical testing on construction materials such as cement, sand & aggregate, and preparing or verifying test reports.
• Handling samples from clients.
• Preparation of data and input of report for materials testing
• Assist the project manager work in relation to the works in Civil Engineering field
• Work closely with engineers and clients and representatives of SAC to ensure proper handling of equipment in compliance with the requirements of ISO/EC 17025

Minimum Education Requirement:

• SPM for Malaysian
• Certificate or Diploma in a relevant technical

Job Title: Mechanical Designer (ID4648)
Location: Bukit Batok
Working Hours: Mon-Fri 8.15am - 5.30pm
Salary: $3000-$3500

Roles and responsibilities:

• To do conceptual and detailed machine design with regard to mechanical aspects;
• To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies.
• To prepare final design configurations, layouts, solid models and production/engineering data;
• To assist in preparation of machine documentation, specifications, manual.

Job Requirements:

• Diploma or relevant in Mechanical Engineering;
• Will consider fresh-graduate.
• Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.
• Proficiency with Solid Works is desirable;
• Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.

REQUIREMENTS:

• Master's Degree in Accounting / Finance / ACCA or equivalent
• Minimum 10 years of relevant working experience in construction industry
• Prior audit experience will be an added advantage
• Experience with accounting software will be added advantage
• Understanding and knowledge of accounting principles, practices, standards, laws and regulations
• Sense of ownership and pride in your performance and its impact on company’s success
• Team player who is driven and able to work in a fast paced environment and under pressure
• Critical thinker and problem-solving skills
• Meticulous and able to multi-task
• Great interpersonal and communication skills

JOB DESCRIPTION:

• Responsible for the day to day account and finance operations
• Prepare and maintain full sets of accounts
• Ensure timely and accurate periodic financial closing and reporting
• Prepare, review and present financial reports and statements to stakeholders in a timely and accurate manner
• Monitor and ensure proper invoicing and monthly payment collections
• Preparation of group consolidation accounts
• Preparation of GST submission
• Handle yearly tax returns and other related claims
• Responsible for cashflow reporting and projections
• Assist in preparing budgets, forecasts and analysis
• Managing statutory audit and tax compliance process
• Liaise with Banks for related banking facilities
• Ensure compliance with internal controls and policies
• Drive continuous improvements in accounting processes, systems and workflows to enhance efficiency and accuracy
• Other ad-hoc duties assigned

Job Description:

We are looking for a Mechanical Engineer to assist in site supervision and coordination for a construction project. Key duties include overseeing project execution, managing progress, coordinating with stakeholders, and ensuring quality control.

Responsibilities:

• Assist in system installation and commissioning.
• Coordinate project planning, materials, and manpower.
• Supervise subcontractors and monitor work progress.
• Conduct site inspections and ensure compliance with standards.
• Prepare reports and documentation as required.

Requirements:

• Diploma/Degree in Mechanical Engineering or equivalent.
• 1-5 years of relevant experience in construction projects
• Good communication skills and project management knowledge.
• Experience in wafer fabs or pharmaceuticals is a plus.

Responsibilities:

• Conduct investigation into causes of bus accidents / incidents arising from bus defects
• Assist in planning & managing campaigns for retrofitting on buses for improved performance, safety and standardization
• Assist to implement maintenance policies for vehicle improvement to meet our operational requirements in accordance to manufacturers’ recommendations
• Conduct engineering audits, smoke checks and field visits
• Any ad-hoc jobs as per assigned

Requirements:

• Diploma in Engineering
• At least 5 years' relevant experience in automotive industry
• Hands-on experience on bus repair
• Proficient in software applications such as Microsoft Office and SAP

We regret to inform that only shortlisted candidate will be notified.

Submitting this application for this position, you acknowledge that you have read the Data Protection Policy for Job Applicants (the “Policy”) of SBS Transit Ltd and its subsidiaries, affiliates and related corporations (‘SBST”) and consent to:

a. The collection, use and disclosure of your personal data by SBST for the purposes of your application and potential employment with SBST and the purposes set out in the Policy: and

b. SBST’s retention of your personal data for two years for consideration of future job opportunities (where applicable) form the date of submission of application.

• Manage day-to-day technical operations, including attending daily toolbox meetings, compliance with WSHA.
• Respond to emergency fault calls during office hours/standby duties after office hours in rotating duty roster and ensure timely rectification of issues.
• Liase with users and authority to prepare and submit detailed work proposals for job requests.
• Prepare costing, condition assessment, and proposal for maintenance works.
• Responsible for inventory record, drawings, documentations and defect liability period registers.
• Compile and maintain service reports, licenses/certificates on site.
• Prepare and submit certificate of completion for maintenance works and services monthly, and prepare monthly claims.
• Supervise and follow up with sub-contractors to carry out corrective maintenance/adhoc works and to rectify defects reported by quality control/auality, assurance, auditor/users.
• Check and certify works done by sub-contractors.
• Perform any other technical tasks as and when required.

Office Location: Punggol Digital District

Site engineers work chiefly on construction projects. They form part of construction management and use their skills and expertise to guide crew members and ensure the successful completion of a project. Site Engineers frequently liaise with clients and negotiate with vendors and suppliers to secure the best deals.

Job Title: Project Engineer (ID5034)
Location: Ubi
Working Hours: Mon to Fri 8.30am – 6pm
Salary: $3000 to $4000


Job Description:

The role and responsibilities include, but are not limited to,
• To manage projects, monitor progress and ensure smooth completion.
• To coordinate the works of a multi-disciplinary workforce including consultants, external subcontractors and etc.
• To handle project risk management and issues escalation.
• To ensure safe work procedures and environmental control measures are implemented at work site.
• To provide project status update to management accurately and in a timely manner.
• To attend to maintenance issues during DLP.
• To assists in products specification and datasheet.
• Any other ad hoc duties assigned by Manager.



Requirement:

• Min Diploma holder in Electrical / Electronic / Mechanical Engineering
• At least 3 years’ experience as Project Engineer
• Motivated to work in challenging, fast paced and result-driven environment
• Good communication and interpersonal skills
• Knowledge of lighting an advantage
• Knowledge of software an advantage, eg. Autocad, Photoshop, Dialux

Job Title: Security Officer (ID1604)
Location: Pioneer, transport pick up Singapore and JB Bukit Indah
Working Hours: 4334 days 12 hours shift (Day & Night)
Day Shift: 8:00am – 8:15pm
Night Shift: 8:00pm – 8:15am
Salary: $1800 - $2350
Benefit: 12 days Annual Leave, AWS and Variable Bonus


Job Description
• Supporting of daily operations in the security office
• Support company new implementation process for security purpose
• Support document control administrative work
• Maintain counter area to make sure the 5S housekeeping is in place.
• Assist on security check for Employee / Visitors / Vendors
• Other non-security job function e.g. temperature screening, post, collect and distribute mail.
• Any other duties assign by GA Manager

Requirement:
• At least GCE N level, ITE or equivalent
• No experience required, training will be provide
• Basic computer literate
• PLRD license required
• Valid Basic Security License

Job Title: Sales Coordinator (ID1602)
Location: Woodland, walking distance from Admiralty MRT
Working Hours: Mon to Fri, 9am to 6pm
Salary: $2400-$3000
Benefit: 14 days AL with additional 1 day every subsequent year, up to max 18 days, Variable Bonus

Job Description
• Coordinating sales team by managing schedules, quotations & filing important documents and communicating relevant information.
• Ensuring the adequacy of sales-related samples, equipment or material.
• Follow up with existing customers and quotations to close deal.
• Responding to feedbacks from customers and give after-sales support when requested.
• Assist in examine & organising stock to ensure quality & quantity is in order before delivery.


Requirement:
• High level of positive energy, out-spoken & flexibility to adapt to fast-pace environment.
• Analytical problem-solvers who can work independently and able meet tight deadlines.
• Multitask and provide excellent customer service

• Manage day-to-day technical operations, including attending daily toolbox meetings, compliance with WSHA.
• Respond to emergency fault calls during office hours/standby duties after office hours in rotating duty roster and ensure timely rectification of issues.
• Liase with users and authority to prepare and submit detailed work proposals for job requests.
• Prepare costing, condition assessment, and proposal for maintenance works.
• Responsible for inventory record, drawings, documentations and defect liability period registers.
• Compile and maintain service reports, licenses/certificates on site.
• Prepare and submit certificate of completion for maintenance works and services monthly, and prepare monthly claims.
• Supervise and follow up with sub-contractors to carry out corrective maintenance/adhoc works and to rectify defects reported by quality control/auality, assurance, auditor/users.
• Check and certify works done by sub-contractors.
• Perform any other technical tasks as and when required.

Office Location: Tuas Naval Base

1. Handle phone calls and giving appointments

2. Assist dr in minor procedures

3. Registration of patients

4. Dispensing of medication

5. Ability to work as a team

JOB DESCRIPTION

• Drive long distances
• Must drive Concrete Mix Truck
• Refuel and clean vehicle.
• Report road incidents to the dispatcher.
• Follow traffic laws.
• Inspect trucks and record issues.
• Follow accident procedures.
• Other Ad hoc duties assigned

Requirements

• Must have minimum 5 years Concrete Mix Truck Driving Experience
• Possess Valid Class 4/5 Driving License
• No Criminal Records
• Must work in irregular shift patterns (Including Night Shifts)

JOB DESCRIPTION

• Drive long distances
• Must drive Concrete Mix Truck
• Refuel and clean vehicle.
• Report road incidents to the dispatcher.
• Follow traffic laws.
• Inspect trucks and record issues.
• Follow accident procedures.
• Other Ad hoc duties assigned

Requirements

• Must have minimum 5 years Concrete Mix Truck Driving Experience
• Possess Valid Class 4/5 Driving License
• No Criminal Records
• Must work in irregular shift patterns (Including Night Shifts)

Architectural Engineer- job Posting

Position Overview: We are seeking a motivated and detail-oriented Project/Site Engineer for Architectural and Structural systems to assist in the supervision, coordination, and execution of construction projects. The ideal candidate will play an integral role in managing various site activities, ensuring quality control, and facilitating communication between internal teams, subcontractors, and clients.

Key Responsibilities:

· Assist in architectural system site supervision works, ensuring quality and progress.

· Coordinate project planning, documentation, and execution of works on-site.

· Oversee project works, manpower mobilization, material planning, and ordering.

· Communicate internally with various departments and externally with clients and subcontractors.

· Coordinate and follow-up on project submissions to authorities.

· Produce regular site progress reports and submit necessary documentation.

· Attend meetings and conduct site inspections to ensure quality control.

Additional Responsibilities:

· Manage all aspects of architectural system site works.

· Supervise manpower scheduling and deployment to meet project timelines.

· Ensure the timely completion and quality of subcontractor works.

· Prepare and submit method statements and other required reports.

· Review and monitor architectural and structural system drawings and approval statuses.

· Collaborate with project managers and stakeholders to resolve site issues.

Qualifications and Requirements:

· Minimum 1-5 years of experience in construction projects.

· Strong communication skills and ability to interact with people at all levels.

· Familiarity with project management processes across all project stages.

Key responsibilities

• Greeting and seating customers
• Presenting menu with recommendation on promotions/food and beverage pairing
• Serving the food and beverages
• Perform cashiering duties
• Attend to customers' request and feedback promptly and professionally
• Maintaining cleanliness of tables and other dining areas

Requirements

• Able to start work in Jan 2025
• Candidate should be able to work 5/6 day per week on rostered shift during outlet operational hours
• Friendly personality
• Good communication skills
• Knowledgeable in alcoholic beverages

Boutique Restaurant in Dempsey Area seeking Assistant Cook

Key Responsibilities

• Prepare food orders according to menu and order.
• Ensure dishes are prepared according company's requirements and hygiene standards.
• Ensure cooking area is organised and clean with utensils and applicances kept in hygienic conditions
• Assist in monitoring and maintaining kitchen inventory

Requirements

• Start work only in late December 2024 or January 2025
• Minimum 4-6 years working experience in relevant field
• Experiences in Chinese cuisine or wok cooking techniques
• Willing to work in kitchen with a small team

Benefit:

• Yearly Increment
• Yearly PWM Bonus
• CPF contribution
• Gross salary payment 2 times per month
• Medical / Dental claims
• Yearly Cleaner’s Day appreciation & gifts
• Career progression/development
• Training provided
• Uniform provided

Job Scope:

• Clean and clear tables, floor and kitchenware.
• Floor care & surface care (vacuuming, mopping, dusting, sanitizing, etc)
• Waste removal.

Job Title: Sputter Process Engineer (ID1603)
Location: Pioneer, transport pick up Singapore and JB Bukit Indah
Working Hours: 4334 days 12 hours shift
Night Shift: 8:00pm – 8:15am
Salary: $2800 - $3600
Benefit: 12 days Annual Leave, AWS and Variable Bonus


Job Description
• Ensure the sputtering machine is tuned to operate at maximum capacity without compromising performance.
• Adjust the sputtering parameters to maintain high-quality output, minimizing defects and inconsistencies.
• Regularly monitor and maintain the sputtering equipment to ensure it remains in optimal condition.
• Optimize the sputtering process to maximize the efficient use of materials, reducing waste.
• Work closely with teams from different departments to ensure smooth operations and address any cross-functional
• issues.
• Analyze data from the sputtering process to identify trends, issues, and areas for improvement.
• Based on data analysis, make precise adjustments to the sputtering machine to enhance performance and quality.
• Implement a continuous improvement approach to keep refining the sputtering process and achieve better results
• over time.
• Any other job assigned by superior.

Requirement:
• Diploma or Bachelor's degree in any Engineer-related field.
• Minimum 4 years of experience in manufacturing process related role for Diploma Holder
• Material Science & Chemistry Fresh Graduate for degree profile.
• Fresh Graduate with strong technical understanding
• Understanding of Sputtering technology
• Good knowledge of Minitab, Microsoft Office

Are you a skilled website developer with a passion for e-commerce? Join our dynamic team and take on an exciting role where you’ll shape the digital presence of a thriving business. We’re looking for a proactive and creative individual to maintain and enhance our website while managing e-commerce operations.

Key Responsibilities:

• Develop, maintain, and optimize the company’s website for seamless functionality and design.
• Oversee and manage the e-commerce platform, including product listings, pricing updates, and promotions.
• Troubleshoot technical issues and implement updates to enhance user experience.
• Monitor website performance and generate analytics reports.
• Support digital marketing efforts, including SEO and online ad management.
• Collaborate with the team to create and upload engaging content.
• Assist in order fulfillment processes through the e-commerce system.