A pre-school cook has a vital role in ensuring that young children receive nutritious and safe meals. The job scope typically includes the following responsibilities:

Key Responsibilities (Cook):

• Prepare breakfast, lunch, and snacks
• Collaborate with preschool management to ensure menus meet the needs of children, including those with allergies or dietary restrictions
• Strive to ensure food served to children are balanced and met the dietary guidelines for children recommended by the Singapore Health Promotion Board.
• Ensure that the food is prepared in a clean and hygienic way
• Ensure meals served are on time
• Ensure proper food storage, handling, and preparation practices to prevent foodborne illnesses.
• Regularly check food expiration dates and ensure kitchen equipment is functioning properly
• Ensure that kitchen/cooking area are well cleaned after cooking
• Maintain high standards of cleanliness in the kitchen and the centre

Job Holder Requirements (Cook):

Qualification: -

Experience: Minimum 1 year experience in similar capacity

Other Knowledge / Skills / Attributes:

• A valid food handler’s certificate is required
• Previous experience in food preparation, especially in a childcare or educational setting, is an advantage
• Good knowledge of food hygiene and food preparation
• Basic knowledge of dietary guidelines for children is beneficial
• Good time management skills
• Honest and trustworthy
• Has initiative and is committed
• Comfort with working in various temperatures and conditions is necessary
• Background checks, including health screenings, are often mandatory

Click on the "Apply Now" button with your comprehensive resume to kickstart your Rainbow Cove Educational career!

or

Send Your Resume To:
Email: [email protected]

Mobile: 8645 9157

For more information about Rainbow Cove Educational, please visit https://rainbowcove.com.sg/

Responsibilities:-

• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999 Person in charge of the workplace implementation and revision of Environmental Management in the worksite
• Act as an Earth Control Measures Officer (ECMO)
• Establish, update, maintain, and implement the Environmental Management System and Environmental Impact Aspect assessment
• Conduct / Plan site environmental inspection and ensure effective implementation and continual improvement on all environmental matters. Advise occupier of the workplace or other person in charge of the workplace on environmental health problems and recommend remedies to establish a healthy working environment
• Oversee the installation of noise meters at site vicinity and monitoring of construction works noise to ensure it does not exceed the permissible noise levels throughout various stages of construction phases
• Coordinate with external pest control operator visits to carry out fumigation, mosquito oiling and rodent control measures. This is to ensure effective control on site
• Liaising with National Environment Agency & Public Utilities Board (PUB) on environmental issues and other statutory requirements of compliance by sites
• Updates on codes of practice & environmental literature and circulates information to each level of employees

Requirements:-

• Must possess Environmental Control Officer Certificate and registered with National Environmental Agency (NEA)
• Min 2 years’ relevant experience

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Ensure all monitoring system of the building management faciities are in good operating condition (error free) and feedback on all alarms and errors generated form BMS.
• Perform scheduling of facilities and building management services to facilitate events and arising requirement.
• Reporting and compilation of daily, feedback, building management facilities faults and activities.
• Operate the plant at the most efficient operating condition and ensure all abnormities are reported for corrective actions
• Validate all facilities & Building management maintenance work carried out by the contractors and ensure compliance to the prescribed standards
• Perform routine building management facilities activities including inventory control. Critical systems checks and functional testing. Able to respond and take action in response to facilities crisis management activities including: power outages, fire alarms, ACMV outages.
• Analyse data and identify trends with facility issues to determine root cause and take appropriate action.
• Responds to BMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Provide technical support to all aspects M&E operations including the operation, maintenance and repair of all mission critical equipment and systems supporting a 24x7 activities to achieve 100% uptime and 100% compliance with all customer SLAs.
• Assist in all site construction activities and installations, in coordination with external contractors to ensure system design, installation and testing adhere to operational standards. Witness testing of all equipment during commissioning and validate sequence of operations and receipt of all operational documentation.
• Maintain compliance with local workplace safety & health (WSH) standards and local electrical and building codes.
• Ensure adherence to all standard operating procedures (SOP) and emergency response procedures (ERP) established for the critical environments, as well as the formal change control process.
• Participates in the building management maintenance of all significant planned and emergency maintenance events for the facility and ensure these activities are executed in a controlled and proven method to ensure the reliability of the critical loads supported by these systems.
• Participates in cross functional coordination

• Higher Nitec / Diploma / Degree in Mechanical or equivalent.
• Minimum 3 years' of practical electrical and mechanical engineering experience in managing and implementing electrical & mechanical systems for critical building management facilities for telecom, broadcast or data centre buildings.
• Respect, Teamwork and Drive.
• Hands on Troubleshooting
• Stay contactable 24 x 7
• Perform rotation Shift duties

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• Teach Spanish as a foreign language
• Prepare and conduct lessons (in-person, or when necessary, online)
• Mark all coursework and assessments
• Perform other duties as assigned from time to time

Qualifications

• At least a Master’s degree, preferably in Spanish as a Foreign Language or similar
• At least two years of experience in teaching Spanish, preferably in higher education
• DELE examiners (preferably)
• Skills/knowledge/experience in online teaching as well as the application of IT to language teaching

More Information

Application Documents (in English)

• At least a Master’s degree, preferably in Spanish as a Foreign Language or similar
• Cover letter in Spanish
• CV in English
• Copies of educational certificates
• Spanish level certificate for non-native speakers (example, DELE, Studies in Spain or Hispanic America)

Submission

Please submit the above-requested documents in a single PDF file in this portal. Shortlisted applicants will be invited to attend an interview and give a teaching demonstration. Shortlisted applicants will be invited to an interview.

Chugai Pharmabody Research Pte. Ltd. (“CPR”) was established in Singapore as a wholly-owned subsidiary of Chugai Pharmaceutical Co., Ltd (Chugai), a member of Roche group, in January 2012 and started operations on July 2, 2012. Located at Biopolis in Singapore, it aims to generate new antibody drugs based on Chugai’s proprietary antibody engineering technologies, such as recycling antibody®, sweeping antibody®, bispecific antibody, various Fc engineered antibodies, and other new antibody engineering technologies that are under development.

Research Assistant – Mid-size Molecule Unit

Job Scope:

· Peptide screening - ELISA, bead-based separation etc.

· DNA/RNA analysis - primer design, PCR, qPCR, purification (spin column, magnetic beads, ethanol precipitation, phenol chloroform extraction etc.), electrophoresis (Agarose gel, Urea-PAGE), NGS(Illumina) etc.

· Protein analysis - SDS-PAGE, western blotting, ELISA etc.

Requirements

· Lead identification screening in drug discovery

· Antibody, protein or peptide engineering

· Biopanning, such as phage display, SELEX, in vitro compartmentalization, microfluidics

· RNA-related analytics, protein purification, NGS data analysis, Biomek operation, etc.

· Degree in Biomedical Science/Biochemistry/Chemical Biology/Biotechnology/Molecular Biotechnology with 1-2 years of working experience in a related field.

· Fresh graduates are welcome to apply.

Interested applicants are invited to email their detailed resume, as well as their qualifications, availability, current and expected salary to: [email protected]

For more information regarding our Company, you may refer to our website at:

http://chugai-pharmabody.com/

We regret that only short-listed candidates will be notified

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The incumbent will play a key role in working closely with the School’s stakeholders involved in undergraduate medical education, particularly senior leadership and key administrative partners of healthcare institutions, to ensure that funding for training medical students are accurately disbursed, payment disputes are resolved satisfactorily, and compile data for reporting purposes. The incumbent will also be responsible for the Division budget management, development of SOPs and guidelines, as well as participate in quality improvement projects.

1. Compute PECT funding for Clinical Postings/Teaching Activities and Clinical Exam Contributions for all Healthcare Institutions that are teaching our students.

• Prepare student day database with data from NUSMed Edu Curriculum Team,
• Collate lesson timetables from NUSMed departments on a posting rotation basis,
• Quarterly collation of info on local and overseas electives postings from Electives Team;
• Annual collation of tutors’ contribution to NUS clinical teaching activities (CTA) and clinical exams from various program/exam coordinators

2. Management of and Reporting on PECT Funding with an annual budget of $65m.

• Disbursement of PECT funding, annual accruals;
• Compute and project PECT funding for current year and planning years;
• Coordinate, process and track PECT payments

3. Manage PECT Funding and Providing guidance and communications on PECT matters

• Projection of PECT budget ;
• Plan PECT budget utilization; and collaboration with Dean's Office Finance and the Curriculum teams for efficient PECT funds management in tandem with Edu division strategy and workplan.
• Review Family Med’s budget proposals
• Establish clear communication channels and close working relationship with the various stakeholders e.g. HCIs, MOH, NUSMed departments and other divisions of Dean’s Office for improved efficiency and coordination.

4. Manage Education Division Budget.

5. Quality improvement project

Participate in the business process re-engineering project to establish an Education appointment and PECT payment app and dashboard. The app and dashboard is an ongoing joint project within the Dean’s Office Education Division in collaboration with other divisions of the Dean’s Office and partners from HCI Education Offices.

Qualifications

• Bachelor’s Degree in Business Management/Administration, Accountancy or related fields
• Candidates should ideally have at least 5 years of work experience in a finance or accounting role.
• Highly self-motivated individual who is able to work independently as well as in a team
• Analytical, meticulous and adaptable in a fast-moving high-pressure environment
• Possess good organization and communication skills to handle stakeholders of various levels
• Tact and discretion in handling sensitive information
• Work experience in the healthcare industry, institutes of higher learning or public service would be advantageous

Nanny for short term care at client's house from 9am to 6pm on weekdays. Start on 25 Nov 2024 to 2 Dec 2024. Public holidays and weekends are non-working days.

Main priority is to look after baby and baby's needs. Baby is 9 months old now.

Job Requirement

1) Able to converse in English

2) Medically fit to care for children

3) Have experience in caring for children aged 1 month to 2 years old

4) Able to do activities and play with the child.

Job Types: Full-time, Contract

Contract length: 9 months

Schedule:

• Day shift
• Monday to Friday

Work Location: In person

Expected Start Date: 02/12/2024

Responsibilities:-

• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999 Person in charge of the workplace implementation and revision of Environmental Management in the worksite
  Act as an Earth Control Measures Officer (ECMO)
• Establish, update, maintain, and implement the Environmental Management System and Environmental Impact Aspect assessment
• Conduct / Plan site environmental inspection and ensure effective implementation and continual improvement on all environmental matters. Advise occupier of the workplace or other person in charge of the workplace on environmental health problems and recommend remedies to establish a healthy working environment
• Oversee the installation of noise meters at site vicinity and monitoring of construction works noise to ensure it does not exceed the permissible noise levels throughout various stages of construction phases
• Coordinate with external pest control operator visits to carry out fumigation, mosquito oiling and rodent control measures. This is to ensure effective control on site
• Liaising with National Environment Agency & Public Utilities Board (PUB) on environmental issues and other statutory requirements of compliance by sites

Requirements:-

• Must possess Environmental Control Officer Certificate and registered with National Environmental Agency (NEA)
• Min 2 years’ relevant experience

Specific Responsibilities

Responsibilities (but not limited to the following)

• Tracking student attendance
• Printing worksheets for classes
• Coordinating make-up classes with parents and updating timetable
• Collecting payment for classes
• Answering general enquiries regarding classes
• Perform any other ad-hoc duties not limited to:
• Taking and sending photos of students to parents
• Sending ad-hoc messages to parents for reminder/events/updates
• Inform instructors of new students
• Tidying the centre

Job Requirements

• Ability to multi-task
• Good team-player
• Communicate effectively
• Ability to work well under pressure
• Require to work on both weekends
• Weekday hours available
• >18 year old, students are welcome to apply
• Commit at least 6 months

Qualifications

• Minimum educational qualification of “O” Level or equivalent;
• Proficient in Microsoft Word and Excel;
• Fluent in English. Ability to speak another language will be an added advantage.

Working hours (For Part-Timers)

• Weekdays (1pm-830pm); Weekends (9am-630pm)

Working hours (For Full-Timers)

• Weekdays (1030am-830pm); Weekends (9am-7pm)

Location

Available in either of the following:

• Bukit Timah Shopping Centre
• Djitsun Mall @ Ang Mo Kio

Job Descriptions

• Provide operational support to the Section Leader in Mixing Section/ Oven & Stacking Section / Slicing Section
• Operate the mixing/ depanner & oven unloader/ slicer
• Ensure proper cleaning is done
• Adhere the disposition of all non-conforming products as instructed by superiors
• Adhere to all working and safety regulations

Requirements

• Primary education applicants are welcome to apply
• 6 days work week
• Fixed Shift (9am to 9pm / 9pm to 9am)
• Able to work overtime as and when required
• Able to work on weekends and public holidays

Job Highlights

* Provide Uniforms
* Free Meals Provided
* Free Bread Daily
* 13th Month Bonus

* Variable Bonus

* Annual Increment of basic salary (based on individual's work performance)
* Medical & Dental Benefit
* Insurance Coverage

COMPANY DESCRIPTION

About BW Group

BW Group is a leading global maritime company involved in shipping, floating infrastructure, deepwater oil & gas production, and new sustainable technologies. Founded in 1955 by Sir YK Pao, BW controls a fleet of over 450 vessels transporting oil, gas and dry commodities, with its 200 LNG and LPG ships constituting the largest gas fleet in the world. In the renewables space, the group has investments in solar, wind, batteries, biofuels and water treatment. BW is proud to be listed as one of Forbes World's Best Employers 2023.

Are you ready to make an impact?

What drives us is our mission to deliver energy for the world today, and to find solutions for tomorrow. If you want to make lives better around the world by providing access to energy, while working on sustainability and decarbonisation, we'd like to hear from you. Working at BW you will feel the pulse of the world each day. If something happens in the world, we feel it, and you can play your part by anticipating and responding to it. Our high-performing teams are drawn to BW by the global nature of our work and the satisfaction of working with collaborative people who inspire each other to deliver exceptional results.

RESPONSIBILITIES

BW Group is seeking an SOX Manager to join our SOX Team with the responsibility to design and implement SOX controls to ensure compliance with Sarbanes-Oxley ("SOX") regulations. Your primary focus will be on understanding end-to-end business processes and controls, including identifying control design gaps and testing operating effectiveness of controls. This role involves coordinating with various departments to ensure internal controls are effectively designed and operating efficiently. The ideal candidate will have a strong background in audit or SOX compliance with a SEC registrant within the maritime industry.

Responsibilities:

• Develop, direct and lead SOX compliance efforts including annual risk assessment and scoping exercise, assessment of controls design, controls effectiveness validation, timely tracking on gap remediation according to the relevant framework surrounding the ICFR (e.g. COSO, PCAOB, SEC guidelines, etc)
• Maintain and update SOX test plans, perform test work and provide guidance to team members on testing approaches and methodologies in accordance with the relevant frameworks
• Collaborate with business departments and IT to provide guidance to ensure proper alignment with SOX requirements and ensure controls over financial reporting are effective
• Provide SOX training and refresher to stakeholders to enhance awareness and quality of SOX controls
• Prepare and present reports on SOX compliance status to senior management and the audit committee.
• Collaborate with Internal and External Auditors and other stakeholders to support the SOX audits and reviews

• Degree in Accounting / Finance or a related field. Certified Public Accountant (CPA), Certified Internal Auditor (CIA) or equivalent
• Minimum of 7+ years of professional working experience required in SOX or audit compliance, or a similar role; 2-3 years of Big 4 experience strongly preferred
• Strong analytical and problem-solving skills and proficient in utilising tools (e.g. Visio, SOX compliance software)
• Strong project management skills with the ability to manage multiple priorities and deliver results within defined timelines
• Excellent communication and interpersonal skills to lead and collaborate effectively with cross-functional stakeholders at all levels to understand comprehensive process flows and control matrices
• A diligent and effective manager who leads by example, demonstrates strong personal credibility and integrity, and works effectively as an integral part of the SOX team to achieve challenging and dynamic objectives

At BW, we offer challenging work in an international environment with a team of dedicated and competent colleagues. We recognise that the success of BW rests with each employee's ability to provide the necessary skills and confidence within the team, and our training is tailored to suit individual needs and career aspirations.

Vision: Best on Water

Mission: We deliver energy for the world today, and find solutions for tomorrow

Values

• Collaborative
• Ambitious
• Reliable
• Enduring

If our values resonate with you and you think you can contribute, we would be delighted to hear from you!

Information for Recruitment Agencies:

BW endeavours to recruit and fill vacancies directly. However, when we do need to engage with agencies, BW operates a preferred supplier list (PSL) and will not be accepting unsolicited applications from non-PSL agencies for this role.

AEDAS is a leading global design practice dedicated to creative excellence and diversity in the built environment. We are a global platform for the most talented architects and designers, focused upon delivering locally-celebrated solutions for cities, communities and clients. Our global network of 11 offices forms a diverse staff base with skills across all sectors in architecture, interior design, building consultancy, master planning, landscape and urban design.

To support our continuous growth and expansion in Asia, AEDAS Singapore is seeking a committed candidate for the following position:

BIM COORDINATOR

Responsibilities:

· Work closely with Architects and team members to implement and monitor work plans;

· Ensure projects are completed in accordance to BIM guidelines and compliance with the relevant government regulatory requirements;

· Manage processes, implementation, best practices and techniques of BIM and related tools;

· Create BIM Design Models and Documentation;

· Coordinate with contractor and subcontractors.

Requirements & Attributes:

· Degree / Diploma in Architecture with minimum 3 years industry experience

· At least 3-5 Years BIM (REVIT) related project implementation experience

· At least 2-4 completed Revit projects

· Excellent knowledge and experience of Autodesk Building Design Suite software including Revit Architecture with Certification – Autodesk Revit Certified Professional Exam

· Locals and SPR only

Please submit a copy of your updated CV including your current salary, expected salary and notice period to daisy[email protected].

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Roles & Responsibilities

We are an established maid agency. We supply domestic helpers from Indonesia, Myanmar, philipines and India .

Seeking experience Admin Assistant to join our family orientated company..

Admin Assitant Responsibilities:

To prepare necessary documents required for Arrival and deployment of domestic helpers

To coordinate with overseas suppliers

To update the list of availability of helpers

To assist the sales team with admin work

Able to do simple accounting

Requirements:

With experience working in Maid agency/ Sales admin will be an advantage

Good PC knowledge in Microsoft Words & Excel.

Good communication skills with good customer service

Responsible and meticulous at work

Able to multi-task & meet datelines

Friendly and willing to learn attitude!

We offer attractive package for the right candidate!

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

You will work as an integral part of the laboratory operations team, providing support to the laboratory manager in operations and related laboratory duties such as safety matters, procurement and core equipment training. If you thrive in a dynamic environment and have a passion for managing laboratory operations and contributing to scientific advancements, this role could be an exciting fit for you!

Key Responsibilities

• Oversee the daily operations of the laboratory, ensuring that all processes and procedures are followed accurately and efficiently
  Facilitate training and development of laboratory users
  Support the operations team on laboratory safety and documentation
  Ensure compliance with all relevant regulations and safety standards to maintain a safe working environment
  Manage the laboratory procurement of equipment and supplies, including negotiating contracts with vendors and suppliers
  Implement and oversee maintenance schedules for laboratory equipment to ensure optimal performance and longevity
  Maintain the microfabrication cleanroom in functional state
  Stay abreast of technological advancements to enhance operational effectiveness.
  Other ad-hoc duties

Qualifications

• Bachelor’s Degree in Engineering or related field from a reputable university
• At least one year of working experience in a research/laboratory environment and familiarity with research operations
• Working experience in rapid prototyping, CAD or cleanroom microfabrication is preferred, but not necessary
• Understanding of safety regulations and compliance
• Ability to work cooperatively and communicate effectively with team members and researchers
• Passionate in mastering research equipment and passing on knowledge to users

To apply, please send your cover letter, CV and three references (name, institution, email). Only shortlisted candidates will be contacted.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Saw Swee Hock School of Public Health (SSHSPH) at the National University of Singapore (NUS) is seeking a research fellow (RF) for the various projects on chronic disease. The successful applicant will have a strong foundation in epidemiology and quantitative methods, show good initiative in troubleshooting tasks and have excellent communication skills.

The RF will play an important role in the conduct of current research projects on diabetes epidemiology, care and outcomes. In addition, successful candidates will be expected to support the preparation of new grant proposals. The RF will also be expected to work independently, while working in a team-based setting.

Responsibilities:

• Conduct and coordinate clinical or epidemiologic research under the direction and supervision of the Principal Investigator and Collaborators, including preparing applications for ethical approval, data collection and management, and quality assurance
• Manage these research projects in a team-based, cross functional research environment, which include supervising/ mentoring junior research staff and research students
• Undertake necessary statistical analysis, including advanced modelling techniques, to interrogate the data
• Draft research reports and manuscripts for scientific sharing and publication
• Support the preparation of new grant proposals
• Attend project meetings and to participate (where necessary) in other meetings
• Ensure compliance with health, safety and ethical guidelines in all aspects of work
• Undertake any other specific roles and management functions as may be reasonably required by the Principal Investigator

Requirements:

• PhD Degree in public health, epidemiology, biostatistics, health services research, health information science or related fields.
• Proficiency in English is a must as the candidate will be required to write scientific papers for publication in international peer reviewed journals and present work undertaken to a technical audience.
• Track record of publications in international peer reviewed journals
• Proficiency in the use of statistical software (Stata and R)
• Expertise in epidemiological and statistical analysis techniques, including joint modelling for time to event analysis and Markov modelling
• Ability to work independently as well as in a team-based, cross functional research environment
• Self-motivated, independent learner and detail-oriented
• Good project management skills

Recruitment is open immediately. The grade of appointment will be accorded based on candidate’s academic qualifications and years of relevant experience.

To apply, please submit the following documents:
a. Cover letter highlighting career goals and relevant experience
b. Curriculum Vitae, containing details of two named referees

Please note that only shortlisted candidates will be contacted.

You’ll get to:

• As a Quality Engineer, you have the opportunity to accelerate the delivery and to improve the quality of the software we build through recommending and implementing automated test suites.
• Work with vendors, government agencies and teams to identify end-to-end test scenarios as well as to automate these test scenarios, applying risk-based strategy to minimize manual interventions.
• Analyse and decompose complicated software systems and design a strategy to test these systems.
• Review Quality Assurance Plan and Test Strategy to provide timely and meaningful feedback.
• Ensure all required testing documentations are in place as part of production preparation checks.
• Drive and advocate continuous improvement in testing practices and tools.
• Conduct research on emerging test automation technologies that can optimize and accelerate the project delivery.

What you’ll bring to the team:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines
• Minimum 5 years' experience in application exploratory testing and regression test automation, application performance testing, and/or application security testing. Hands-on experience in automating various types of tests such as unit tests, API tests, Integration Tests, UI Tests, and End-to-end Tests.
• Create and support test automation strategies and implementations
• Knowledge of test best practices, test methodologies and their corresponding tools.
• Must have strong troubleshooting and debugging skills
• Meticulous attention to details
• Strong analytical, interpersonal and presentation skills
• Keen to share knowledge with team mates
• Curious, open to new ideas
• Quick to learn new skills
• Proactive, self-driven and motivated

Bonus points for:

• ISTQB, CSQA, CSTP or other relevant certification
• Excellent verbal communication and listening skills
• Experience in agile development environment will be an added advantage
• Experience in DevOps will be an added advantage
• Experience in Performance testing will be an added advantage

Reports to: Directors

Core purpose of the role: This position will play a pivotal role in the operations team for all HR related matters. The individual will be responsible for all aspects of HR from recruitment, onboarding/ off boarding processes, claims, training and development, as well as staff engagement and welfare of the employees.

Job scopes:

Recruitment and On-boarding

• Determine and use the appropriate sourcing channel (including Jobs Bank, LinkedIn, job portals, recruitment agencies and internal applications)
• Coordinate the recruitment process, including but not limited to understanding job specifications, posting advertisements, pre-screening of candidate’s applications according to specifications, submitting qualified applications to the hiring managers and tracking application progress to position close
• Conduct interviews
• Arrange background check of new hires
• Manage end-to-end on-boarding activities including but not limited to accounts creation, IT related email and access, induction packs
• Arrange new hire induction

HR Operations

• Provide prompt update and accurate maintenance of employee database and personnel files
• Support in providing inputs to update HR reports, budget report, internal HR working templates, external statutory/labour market survey and headcount related reporting
• Monitor employees' work pass / MOM employment pass compliance
• Monitor probationary period, etc
• Review and update Employee Handbooks and Business Conduct Guidelines
• Maintain organisation charts and prepare monthly HR reports
• Support in the update of HR policies, processes and procedures

Performance Management

• Support the full suite of annual performance review cycle (communications to staff, creation of online forms and provide updates on completion rates and analytics)
• Work closely with business leaders to ensure the performance management exercises are properly executed and completed on time

Pay Review

• Support the annual pay review process
• Creation of excel spreadsheets for management input and analytics to update data on performance excel spreadsheets
• Participate in C&B surveys and benchmark with various key companies in similar industry

Employee Relations

• Support to business leaders in all employee relations matters
• Provide HR policies guidance and interpretation to employees
• Handle employee grievances, disciplinary issues and counsel staff

Offboarding

• Coordinate exit process: payroll, employee records, exit interviews

Payroll & Benefits Administration

• Manage and execute regular benefits administrations
• Ensure timely and accurate execution of CPF, government-claim submissions (Maternity, Paternity, Childcare and NS claims), income tax (IR8A and IR21) matters
• Maintain accuracy and update movements in company insurance policy

Employee Engagement

• Plan and execute internal employee engagement activities such as dialogues, and corporate staff engagement events.

Learning & Development

• Conduct training needs analysis for business units and employees.
• Source for external vendors, coordinate course registration and training grant applications
• Evaluate and monitor training programs and budgets

Ad Hoc Projects

• Drive and implement process improvements to increase HR efficiency and effectiveness.
• Participate in ad-hoc assignments and projects as assigned.

Qualifications & Experience:

• University Degree in Human Resources or related degree
• Strong knowledge of HR generalist functions and at least 3 years of relevant experience

Knowledge / Skills

• Confidentiality and discretion.
• Excellent attention to detail and organisational skills.
• Effective communication and interpersonal skills.
• Comfortable in a fast-paced and dynamic environment.
• Proactive and highly organized with excellent time management skills & adherence to deadlines.
• A problem solver with a “can do” attitude who is not afraid to think outside the box.
• A collaborative team player, who is sociable
• Ability to work independently and autonomously.
• Advanced knowledge of MS Office: Excel, Word, PowerPoint, Outlook

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The National University of Singapore invites applications for the position of Research Assistant in the Department of Information Systems and Analytics, School of Computing. The School of Computing is strongly committed to research excellence in all its dimensions: Searching for fundamental results and insights, developing novel computational solutions to a wide range of applications, building large-scale experimental systems and improving the well-being of society. We seek to play an active role both internationally and locally in the core and emerging areas of Computer Science and Information Systems.

The Research Assistant will be responsible for working closely with the Principal Investigator and lab members on one or more research projects. He/she should possess experience or interest in at least one of the following research areas:

Key responsibilities:

• Build a tree based private blockchain system for the given specification. It is a tree structure with hash based dependency for validation similar to blockchain.
• Evaluate the tree based system for efficiency, accuracy, scalability, throughput and energy efficiency through simulations with varying data complexities.
• Build an application using the tree based structure and gather insights from users, developers or businesses leveraging BlockForest, focusing on ease of usage/integration and practical benefits.

Only shortlisted candidates will be notified.

Job Requirements

• A Bachelor’s degree with Honours in Computer Science or related area;
• Good knowledge in Blockchain technologies; and
• Experience in research

Procurement Specialist (Contract)

You will be responsible for the procurement of spares/parts, supplies and services for the maintenance and operation of the power plant and its facilities.

Responsibilities

• Collaborate with plant engineers and personnel from the maintenance / operations / facilities teams on the requirements of the materials / services based on stipulated technical specifications and scope of work descriptions.
• Perform sourcing activities from both local and overseas vendors.
• Prepare and send out RFQs to the relevant suppliers/vendors and monitor their submissions.
• Conduct supplier evaluation and manage selection processes to ensure submissions are in line with the technical and commercial specifications.
• Expedite the delivery of the order and communicate with the internal stakeholders for any changes to the order as needed.
• Resolve supply, quality, and service invoicing issues with vendors and ensure commercial, legal and contractual compliance in all the procurement transactions.
• Undertake procurement continuous improvement initiatives.

Requirements

• Engineering degree in Mechanical / Electrical / Control & Instrumentation or equivalent.
• Technical procurement experience in a similar environment will be advantageous.
• Strong technical knowledge and evaluation writing skills.
• Excellent planning, organising, communication, and negotiation skills.
• Proficiency with MS Office suite especially Excel. SAP experience will be a plus.
• Resilient, self-driven and independent team player with the good ability to work multi-task and meet deadlines.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The laboratory of Presidential Young Professor Liu Yuxin at National University of Singapore (NUS Bioelectronic lab website: https://www.lab-liu.com/) seeks postdoctoral fellows with strong enthusiasm and interest in implantable electronics, wearable electronics, flexible electronics, and bioelectronics research.

Key Responsibilities

• Lead and manage a multidisciplinary research project
• Design and conduct research in flexible electronics, implantable electronic, wearable electronics and electrical engineering area
• Validating the bioelectronics in pre-clinical or clinical model
• Prepare and draft manuscripts for high-impact journals

Qualifications

• Obtained or expecting a PhD degree in Electrical Engineering, Biomedical Engineering, Chemistry, Material Science and Engineering or related fields
• A strong interest in bioelectronics, wearable electronics, flexible electronics. Scientific curiosity and motivation to perform scientifically rigorous experimental work.
• Previous experience in printed electronic board (PCB) design, electronic circuits, firmware and APP development
• Excellence in conducting independent research with great critical thinking and experimental design. Interested in working in a multidisciplinary team and leading a multidisciplinary project
• Strong verbal and written communication skills in English
• Previous research experience in microfabrication is advantageous.

The SingHealth Duke-NUS Global Health Institute (“SDGHI”) is a platform for global health activities across the SingHealth Duke-NUS Academic Medical Centre (“AMC”). The Institute aims to address current and emerging health challenges across Asia. Working in collaboration with partners, the Institute seeks to tackle prevalent health challenges, strengthen health systems and better insulate countries from pandemics and disease threats.

The Planetary Health Initiative is SDGHI’s newest strategic initiative. Planetary health pertains to the integrated state of health of both people and the planet. It recognizes that people’s health is now greatly shaped by human-driven global environmental change, such as climate change, environmental pollution, rapid urbanisation, biodiversity loss, among others. Addressing these interlocking challenges requires concerted actions within and beyond the health sector, spanning diverse disciplines and nations.

During the Initiative’s inaugural phase, the Institute will focus on launching new educational and capacity-building activities, conducting landscape analysis of the current state of play especially at the regional level, exploring research collaborations with other planetary health-oriented groups within Singapore and beyond, and implementing policy influencing and advocacy activities – all geared towards positioning the Institute as an emerging thought leader in planetary health in Asia and beyond.

The Research Fellow will be part of the Initiative’s inaugural team and will significantly contribute to the early development of the Institute’s planetary health portfolio. The selected candidate will perform a variety of research activities which include planning, organising, and conducting research studies, including but not limited to the following:

• Independently carry out the design and execution of research projects.
• Write and review research papers, present research outcomes, conceptualise new ideas and develop plans for independent research.
• Provide support for external grant/protocol development, study design, ethics review application, and other research management activities.
• Contribute to other activities of the Planetary Health Initiative related to education, capacity building, innovation, policy advocacy, etc.
• Provide guidance and mentorship to undergraduate/medical students and research assistants.
• Perform duties related to the activities of the Planetary Health Initiative (such as advocacy, policy engagement, etc.).

Job Requirements:

• PhD in relevant fields such as public health, health systems, sustainable development, social sciences, among others, AND/OR post-graduate medical degree.
• Minimum with at least 2 years’ of relevant research experience and training. MD/MBBS graduates with a relevant Master’s degree may also be considered.
• Possess advanced knowledge of specific planetary health topics/issues of interest, as well as wide familiarity about the evolving planetary health field, including principles, frameworks, issues, emerging discourse, and policy developments
• Proficiency in research design and execution, preferably in conducting mixed-methods research(both quantitative and qualitative)
• Demonstrated capability of research independence growing progressively.
• Have strong writing and critical thinking skills, as well as good communication and presentation skills, which can be demonstrated through research publications in high impact journals, commentaries and blogs, conference presentations, and speaking engagements.
• Possess strong interpersonal and relationship-building skills which are vital for engagement with partners, collaborators, funders, and other external stakeholders.
• An emerging leader, team player, and project manager who can supervise and mentor junior colleagues; prioritize, multi-task and work collaboratively in a diverse workforce; and coordinate multiple projects and activities.

We regret that only shortlisted candidates will be notified.