As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to perform modelling and real-time simulation of electric vessel’s onboard microgrid and propulsion system.

Key Responsibilities

• Participate in and manage the research project with Principal Investigator (PI), Co-PI and the research team members to develop onboard microgrid simulation models with energy management systems as well as to plan and test the relevant hardware systems.
• Work with research team to deliver the work scope and undertake these responsibilities in the project.
  Work Responsibilities:
  1. Develop detailed electrical models of the microgrid (power system) of various e-vessels based on the concept design in a simulation environment such as Matlab/Simulink.
  2. Design and develop an intelligent energy management system for the e-vessel microgrid for coordinated control of multiple energy sources considering cost, carbon, and operation constraints.
  3. Operate the simulated electrical model with EMS controller to perform simulations for various cases to demonstrate performance and recommend improvements at unit, sub-system and whole system level.
  4. Implement and carry out simulation studies for onboard microgrid and connection to shore charging infrastructure.
• Recommend efficient and reliable power system architecture(s) with other merits of high-density and light-weight.
• Test the relevant power electronics and drives system hardware and troubleshoot the challenging problems.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment and assist in laboratory management.
• Mentor students involved in the research project
• For those hired at senior levels, management responsibilities may be included

Job Requirements

• Have a Master’s or PhD’s degree in Electrical Engineering or equivalent from a recognized University. Major in Power Engineering will be advantageous.
• Minimum 3 years of relevant experience in modelling and energy management algorithm development using MATLAB/Simulink for microgrid applications.
• Knowledge of power electronics, drives, and control is highly preferred. Hardware testing experience will be advantageous.
• Have experience and commitment to participate in project meetings.
• Self-motivated team player and good project management skills.
• Excellent writing, communication, presentation, and interpersonal skills.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

The National University Health System (NUHS) is an integrated Academic Health System and Regional Health System in Singapore that delivers value-driven, innovative and sustainable healthcare. Institutions in the NUHS group include three hospitals – National University Hospital, Ng Teng Fong General Hospital and Jurong Community Hospital; three National Specialty Centres – National University Cancer Institute, Singapore, National University Heart Centre, Singapore and National University Centre for Oral Health, Singapore; a polyclinic group – the National University Polyclinics; one medical centre – Jurong Medical Centre; and three academic health sciences institutions – National University of Singapore (NUS) Yong Loo Lin School of Medicine (including the Alice Lee Centre for Nursing Studies), NUS Faculty of Dentistry and NUS Saw Swee Hock School of Public Health.

The Departments are seeking candidates who are highly motivated and willing to join us for a challenging and fulfilling appointment as Registrar on a contractual basis.

As a Registrar, you will be part of the care team led by Senior Consultants/Consultants the overall supervision and day-to-day running of the wards, including patient care. In addition, you shall demonstrate good diagnostic and clinical management acumen and perform any other duties as directed by Head of Department or the Chairman Medical Board of the Hospital.

•Be in active clinical practice

•Possess a basic medical degree from an accredited medical university or medical school

•Possess a 3 year of post housemanship clinical experience

•Possess specialty knowledge

•Must be registered with the Singapore Medical Council

•Able to work independently with demonstrated competence in managing patients in the department

•Confident, takes initiatives and a good team player

The National University Health System (NUHS) is an integrated Academic Health System and Regional Health System in Singapore that delivers value-driven, innovative and sustainable healthcare. Institutions in the NUHS group include three hospitals – National University Hospital, Ng Teng Fong General Hospital and Jurong Community Hospital; three National Specialty Centres – National University Cancer Institute, Singapore, National University Heart Centre, Singapore and National University Centre for Oral Health, Singapore; a polyclinic group – the National University Polyclinics; one medical centre – Jurong Medical Centre; and three academic health sciences institutions – National University of Singapore (NUS) Yong Loo Lin School of Medicine (including the Alice Lee Centre for Nursing Studies), NUS Faculty of Dentistry and NUS Saw Swee Hock School of Public Health.

The Departments are seeking candidates who are highly motivated and willing to join us for a challenging and fulfilling appointment as Associate Consultant on a contractual basis.

As an Associate Consultant, you will be required to carry out the duties as directed by the Head of Department in accordance with the policies and guidelines set by the Hospital, National University Hospital (NUH) and the Ministry of Health (MOH).

You must be able to demonstrate good technical skills (i.e. operative and procedural skills where applicable).

•Possess a basic medical degree and a postgraduate qualifications relevant to the department’s specialty or nature of operations registrable with the Singapore Medical Council

•Be in active clinical practice

•Must be registered with the Singapore Medical Council and must be accredited as Specialists by the Specialist Accreditation Board, Ministry of Health

•Able to work independently with demonstrated competence in managing patients in the department

•Confident, takes initiatives and a good team player

The National University Health System (NUHS) is an integrated Academic Health System and Regional Health System in Singapore that delivers value-driven, innovative and sustainable healthcare. Institutions in the NUHS group include three hospitals – National University Hospital, Ng Teng Fong General Hospital and Jurong Community Hospital; three National Specialty Centres – National University Cancer Institute, Singapore, National University Heart Centre, Singapore and National University Centre for Oral Health, Singapore; a polyclinic group – the National University Polyclinics; one medical centre – Jurong Medical Centre; and three academic health sciences institutions – National University of Singapore (NUS) Yong Loo Lin School of Medicine (including the Alice Lee Centre for Nursing Studies), NUS Faculty of Dentistry and NUS Saw Swee Hock School of Public Health.

The Departments are seeking candidates who are highly motivated and willing to join us for a challenging and fulfilling appointment as Clinical Associate on a contractual basis.

As a clinical associate, you will be responsible for the total management of patients in the ward and administrative duties required of the department to provide direct patient care. In addition, you will be responsible for assisting the Registrar and Senior Staff in the running of the Specialist Outpatient Clinics.

•Be in active clinical practice •Possess a basic medical degree registrable with the Singapore Medical Council

•Possess a 3 year of post housemanship clinical experience

•Must be registered with the Singapore Medical Council

•Able to work independently with demonstrated competence in managing patients in the department

•Confident, takes initiatives and a good team player

Job Description

• Business planning and management.

• Tool Productivity improvement.

• Capital investment evaluation and control.

• Program manage product transfers

Job

Qualifications:

• Bachelor's degree in logistics, supply chain management, business administration, or a related field.

• 12+ years working in Semiconductor Industry Supply Chan Planning domain
• Excellent leadership and interpersonal skills, with the ability to motivate and coach a diverse team.
• Ability to analyze data, identify trends, and make data-driven decisions.
• Strong problem-solving and decision-making skills, with the ability to prioritize competing demands.
• Excellent communication skills, both verbal and written, with the ability to interact effectively with internal and external stakeholders.
• Ability to work under pressure and meet tight deadlines while maintaining attention to detail.
• Commitment to fostering a positive and inclusive work environment.

What we're looking for

We are seeking for Deployment Manager who is responsible for the deployment of LR OneOcean and partner products to end users globally. These software deployments may be supporting a new business win or upgrading current customers to our latest software version.

What we offer you

• The opportunity to work for an organization that has a strong sense of purpose, is values driven and helps colleagues to develop professionally and personally through our range of people development programmes.
• A Full time permanent role.

The Role :

• Deployment Managers are a key cog in the revenue generation engine of LR OneOcean, helping to realise new revenue as quickly as possible. They support account retention through helping customers negotiate their first interaction with the product, also supporting adoption and advocacy through each and every customer touch point they have.
• Through solid technical knowledge and the ability to understand customer requirements, they help advise customers on what will make each deployment a success and build project plans to deliver this. They leave the customer with functional software and trained staff.
• They work cross functionally with sales, support and development to put the customer first and guarantee their success.
• The Deployment Manager is responsible for the success of all customer deployments within the assigned customer pod, including trials, new customers, new vessels, new services and software upgrades. A breakdown of those responsibilities is as follows;

Deployment

• Support with pre-sales activity as required to ensure the sale is optimised for deployment.
• Own each deployment project through all phases of scoping, requirements capture, planning, reporting and successful execution.
• Validate the handover data, ensuring that all details required from Sales are present and correct before the onboarding process starts
• Be the point of contact between LR OneOcean and the end user (ship-based stakeholders) during deployments.
• Support communication between LR OneOcean and the customer (office-based stakeholders) during deployments. Support the addition of subscriptions into the internal business system.
• Manage input required from 3rd party providers (e.g. Marlink or Inmarsat).
• Set up project governance and provide clarity and ownership of deployment reporting, ensure all stakeholders have easy access to updates and status.
• To ensure that any physical goods required for a software deployment are delivered in a timely manner, and if necessary, coordinated with any outfit management / physical product supply
• To assist the vessel where necessary in the installation of any hardware / software.
• Customer training is required for deployment of LR OneOcean products and Services to ensure that this is efficient through use of technology.
• Work with the Support Team in managing any technical issues that may arise during installation and commissioning.
• Confirm with customer that all services are working and that the end user understands the essential basics of managing the subscribed services.

Post deployment

• Monitor the performance of key customer software, ensuring the deployed set up remains in optimal condition and act as a point of escalation for technical representatives of the customer.
• Support customers with the deployment of upgrades.

Knowledge Management

• Be an active member of the Deployment Knowledge Base, regionally and globally, helping to make the deployment process as efficient as possible.

Other

• Support product development activity, to ensure the product is optimised for deployment.
• Conduct CSAT surveys during listening points in the deployment and post deployment journey, to ensure customer satisfaction levels remain high.
• Support new releases with deployment testing.
• Provide cover for holidays for cluster / non-cluster roles.
• Travel within the APAC and overseas may be required and is considered an occasional feature of this role. Requests could be made at short notice.
• Provide out of hours support / assistance in emergency or time sensitive situations (either in on call or shift pattern).
• Any other task determined necessary by line management.

What you bring

1. Diploma or Bachelor’s degree in Maritime Navigation or Mechanical Engineering or equivalent and/or Chartered/Professional qualification and a member of a relevant professional institution.
2. Relevant experience in the Deployment Manager and responsible for the success of all customer deployments within the assigned customer pod, including trials, new customers, new vessels, new services and software upgrades. Deployment software installation, troubleshooting.
3. Proficiency in the English and Mandarin Chinese Language commensurate with the work and to demonstrate effective interpersonal skills.

About us

We are a leading international technical professional service provider and a leader in classification, compliance, and consultancy services to the marine and offshore industry, a trusted advisor to our customers helping to design, construct and operate their assets to the highest levels of safety and performance. We are shaping the industry’s future through the development of novel and innovative technology for the next generation of assets, while continuing to deliver solutions for our customers every day.

Be a part of

Lloyd’s Register is wholly owned by the Lloyd’s Register Foundation, a politically and financially independent global charity that aims to engineer a safer world through promoting safety and education. For a thriving ocean economy, Lloyd’s Register colleagues and Lloyd’s Register Foundation work together to fund research, foster industry collaboration and develop action-oriented solutions to make the world a safer place.

Want to apply.

Here at Lloyd’s Register, we care, we share and we do the right thing in every situation. It’s ingrained in our culture and everything we do. We are committed, and continually strive, to lead with our values that empower and enable an inclusive environment conducive to your growth, development and engagement. It doesn’t matter who you are, what you have experienced, how you identify, how old you are, where you are from, what your beliefs are or how your brain or body works – the diversity of our colleagues is fundamental to our futures and the changes we can make together. Our inclusive culture allows us to connect together authentically and to be courageous and bold. We don’t just talk about our differences, we celebrate them! We are committed to making all stages of our recruitment process accessible to all candidates. Please let us know if you need any assistance or reasonable adjustments throughout your application and we will do everything we possibly can to support you. If you don't tick every box in these ads, please don't rule yourself out. We focus on hiring people who share our goal of working together for a safer, sustainable, thriving ocean economy.

We care, we share, we do the right thing.

If you have further questions about this role, please contact us at [email protected] and we will respond to you as soon as possible.

Diversity and Inclusion at Lloyd's Register:

Together we are one Lloyd’s Register, committed to developing an inclusive and safe workplace that embraces and celebrates diversity. We strive to ensure that all applicants to LR experience equality of opportunity and fair treatment, because we believe it is the right thing to do. We hope you do too.

As a Disability Confident Committed Employer, we have committed to:

• Ensure our recruitment process is inclusive and accessible.
• Communicating and promoting vacancies offering an interview to disabled people who meet the minimum criteria for the job.
• Anticipating and providing reasonable adjustments as required
• Supporting any existing employee who acquires a disability or long-term health condition, enabling them to stay in work.
• At least one activity that will make a difference for disabled people.

Find out more about Disability Confident at: www.gov.uk/disabilityconfident

Copyright © Lloyd's Register 2024. All rights reserved. Terms of use. Privacy policy. The Lloyd's Register Group comprises charities and non-charitable companies, with the latter supporting the charities in their main goal of enhancing the safety of life and property, at sea, o land and in the air - for the benefit of the public and the environment (Group entities).

• Assist Finance & Procurement Departments in digitising and digitalising invoices & documents
• Scanning, Cataloging, Archiving records
• Data Entry
• Proficient in MS Excel
• $10.00 to $12.00 per hour
• Mondays to Fridays (on site)
• 9.00am to 6.00pm
• Able to commit for 2 to 6 months.
• Able to commence immediately.
• (Full time positions available as well)

We are korean restaurant,looking for experience korean food chief cook, with traditional recipes setting up menus and preparing high-quality dishes.

Applicant should be able to delegate tasks to kitchen staffs to ensure meals are prepared in a timely manner. Also you should be familiar with sanitation regulations in accordance to Singapore Government standard.

"Chef Roll" is another name for a knife roll, the one thing that chefs take with them from job to job. Successful applicant will be short listed for interviews.

At Thermo Fisher Scientific, you’ll discover meaningful work that makes a positive impact on a global scale. Join our colleagues in bringing our Mission to life - enabling our customers to make the world healthier, cleaner and safer. We provide our teams with the resources needed to achieve individual career goals while taking science a step beyond through research, development and delivery of life-changing therapies. With clinical trials conducted in 100+ countries and ongoing development of novel frameworks for clinical research through our PPD clinical research portfolio, our work spans laboratory, digital and decentralized clinical trial services. Your determination to deliver quality and accuracy will improve health outcomes that people and communities depend on – now and in the future.

Our PPD® Laboratory Services team has a direct impact on improving patient health through the expertise of scientists, industry thought-leaders and therapeutic experts. As the world leader in serving science, our laboratory professionals bring their commitment to accuracy and quality to deliver groundbreaking innovations.

Office Location: 61 Science Park Rd, 117525, Singapore

Work Setting: Fully On-site (5 times a week on-site)

Work Shift Schedule: Tuesday to Saturday (Happening in 2 Phases)

Phase 1 - First 3 to 6 Months (Starts 1pm to 10pm)

Phase 2 - After 3 to 6 Months (Starts 4pm to 1am)

Shift Allowance:

Phase 1 - SGD 350/month

Phase 2 - SGD 700/month

Discover Impactful Work:

Performs duties and training to acquire the skills required for sample and standard handling in support of the laboratory. Provides support to Sample Coordinator and performs administrative tasks in the Sample Management department. Follows SOPs, applicable client procedures, and fulfills laboratory requests with modest direct supervision.

A day in the Life:

• Performs a variety of simple inventory tracking procedures (receipt, check-in, login, labeling, inventory, transport, check-out, etc.) and administrative tasks in support of laboratory operations.
• Communicates status of tasks to supervisor and/or appropriate laboratory staff.
• Trains on SOPs, regulatory guidelines, and storage requirements.
• Supports response to environmental unit alarms and may participate in on-call responsibilities.
• Performs daily work assignments accurately, timely and in a safe manner.

Keys to Success:

Education

• High / Secondary school diploma or equivalent and relevant formal academic / vocational qualification
• Technical positions may require a certificate

Experience

• Previous experience that provides the knowledge, skills, and abilities to perform the job (comparable to 0 to 1 year) or equivalent combination of education, training, & experience.
• Years of experience refers to typical years of related experience needed to gain the required knowledge, skills, and abilities necessary to perform the essential functions of the job. Years of experience are not to be used as the only determining factor in establishing the job class or making employment selection decisions.

Knowledge, Skills, Abilities

• Familiarity with Microsoft Office including Word and Excel
• Time management skills
• Ability to maintain detailed tracking and documentation clearly and accurately according to SOP
• Written and oral communication skills
• Ability to work in a collaborative team environment

Working environment

Thermo Fisher Scientific values the health and wellbeing of our employees. We support and encourage individuals to create a healthy and balanced environment where they can thrive. Below is listed the working environment/requirements for this role:

• Able to communicate, receive, and understand information and ideas with diverse groups of people in a comprehensible and reasonable manner.
• Able to work upright and stationary and/or standing for typical working hours.
• Able to lift and move objects of 15 to 40 pounds
• Able to work in non-traditional work environments.
• Able to use and learn standard office equipment and technology with proficiency.
• May have exposure to potentially hazardous elements, including infectious agents, typically found in healthcare or laboratory environments.
• Able to perform successfully under pressure while prioritizing and handling multiple projects or activities.
• Exposure to fluctuating and/or extreme temperatures on rare occasions

Responsbilities

Ensure the integrity, scalability, and security of the global platform, while driving its evolution to meet the growing needs of both Group IT and the business aligned with Symrise's digital and corporate strategies.

In this interdisciplinary role at the interface to the business, you will – in addition to day-to-day operational tasks – evaluate new integrated features to provide recommendations to senior IT stakeholders that further evolve the platform. Your role will be embedded within the organization to ensure strategic alignment, provide technical expertise, and facilitate seamless collaboration with IT teams, business stakeholders, and external partners and vendors.

• Responsible for the overall architecture, design, implementation and maintenance of the platform, including interfaces with other IS components or client/server APIs with on-prem/cloud solutions, such as LDAP, SAP or legacy applications
• Overall responsible for application security and platform related audits
• Drive the continuous improvement of processes and/or technology, considering technical debt and prioritizing occurring incidents or problems
• Manage projects for regular platform upgrades and features implementation (configuration, scripting, reporting) as well as troubleshooting in close collaboration with the platform owner and relevant stakeholders
• Define and foster the adoption of best practices in architecture, methodology, coding, testing and development operations among relevant stakeholders
• Ensure internal platform maintenance across its entire lifecycle (development, maintenance, support) and work with external partners as appropriate

About you

• Bachelor’s degree in Computer Science, Information Technology, or equivalent technical qualification in a related field
• ServiceNow Administrator or Developer Certification; Technical Architect Certification is advantageous
• At least 3 years of relevant experience working with the ServiceNow platform, including architecture, design, and development
• Familiarity with IT service management principles, processes, and best practices
• Proven knowledge of Agile project management methodologies such as Scrum or Kanban
• Strong communication, presentation and influencing skills at all levels of the organization
• Interdisciplinary mindset with the proven ability to translate business requirements into technical design
• Fluency in written and spoken English

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.
• We are looking for people who
• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

About the role

Works closely with and have impact on: Global Research & Development (R&D), Post Market Surveillance, and Global Regulatory Affairs (RA) Teams

Reports to: Senior Manager QA R&D

Function: Global QA & Compliance Organization

Work Location/Site: Singapore / Global Headquarters

Role Overview

This position is responsible to ensure that products meet quality goals and regulatory requirements, including but not limited to FDA Regulations, ISO 13485, EU MDR requirements, and Risk Management per ISO 14971 and maintain compliance of the Quality Management System (QMS).

Duties and Responsibilities

• Partner with R&D teams in the USA, Japan, and Singapore to ensure that design control is completed in accordance with procedures, WI, regulatory requirements, and assure that required outputs have been completed
• Execute risk management for devices, processes, and provide the assessment results from product development through to the launch
• Maintain and update risk management files with Global R&D/Manufacturing Engineering (ME) teams to support product development (Risk Management Plans, Risk Control Log, Benefit Risk Assessment Risk Management Report, xFMEA, etc.), and act as the Risk Management expert
• Assist in the review and approval of design development plans, verification and validation protocols, reports, master V&V plans and reports, and design transfer
• Review and approve design verification test protocols, reports and data from a logical point of view (Compliance, rationale, objectiveness and statistics)
• Partner within Quality and R&D to ensure design control documentation (Risk Management, Traceability/Linkages) & design change control requirements are met
• Review and approve biocompatibility protocols and reports
• Ensure compliance of IQ, OQ, tests method validation, Standard Operating procedures and work instructions regarding product development
• Maintain compliance to QMS procedures of the R&D Singapore site, and support the Singapore R&D Site - QA
• Support External audits by competent authorities and notified bodies
• Support internal audits at the local site, and other sites as required
• Review and approve other quality documents (e.g., IQ, OQ, PQ, WI, etc) within areas of responsibility
• Propose and execute quality/process improvements. Write/review policies/ processes/ procedures and related documents
• Manage and monitor the progress of the calibration and maintenance of testing equipment. Ensure calibration or maintenance records satisfy regulatory and QMS requirements (act as Equipment Control Administrator in Singapore)
• Participate in development projects and change control request meetings to support the resolution of engineering issues
• Collaborate with the post-market surveillance team and complaints investigation teams to maintain risk management process throughout a product’s lifecycle
• Provide support for other quality activities and improvement initiatives, quality data collection and trending, CAPAs, change controls, training, etc.
• Support initiatives as identified by management to support QMS and other regulatory requirements in Singapore

Requirements

Experience

• At least 4+ years of Industry experience working as QE Engineer in Medical Device/ Pharmaceutical product or optical engineering business field
• Experience in test method validation
• Experience in Design control, Design Transfer, Design and Development Process
• Demonstrated knowledge of Risk Management (ISO14971), Design control, Design and Development Process and Quality System (any one of ISO13485).
• Understanding and Knowledge of biocompatibility studies
• Experience in coordination and planning of complex activities and ability to identify and resolve complex problems through effective use of technical and interpersonal skills
• Product development experience (e.g. approaches for definition of requirements and specification setting for verification and validation). Practical experience in design control and risk management
• Effective use of oral and written communication skills to clearly communicate the quality position, and the actions necessary to resolve issues
• Interpersonal, team, leadership, and negotiation skills to handle conflicting priorities
• Strong oral and written communication skills, excellent interpersonal and cross-cultural skills required
• Capable of clearly presenting and justifying quality requirements to management
• Accreditation by a professional body is highly desirable. Examples include American Society for Quality (ASQ) Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE)

Skills/Accreditations

• Smooth communication ability
• Business software skills (e.g. Word, Excel and Power point)
• Experience with statistical software such as Minitab
• Voluntary working attitude with a creative idea
• Passionate working attitude to pursue a goal with patience.
• Flexibility for changes

Academic Qualifications

• A bachelor’s degree or higher in Chemical, Bioengineering, Mechanical, Optical Engineering or related fields.

Travel requirements

• 2-3 international travel annually mainly Thailand.

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

Duties & Responsibilities:

Principal

• Occasionally establishes and prepares basis of design and/or estimation and design philosophy and requirements prior to execution of electrical detailed engineering works.
• Occasionally performs electrical system studies including value engineering to determine most cost-effective design but still conforms to Client requirements.
• Normally prepares key electrical engineering documents like Key Single Line Diagrams, Conceptual Layouts, Substation Layouts and, system diagrams for Fire Alarm and Communication Systems in accordance with Client and Project requirements to facilitate the execution of electrical detailed engineering works.
• Normally prepares specifications, data sheets, requisitions, technical evaluation reports and vendor data review of major substation electrical equipment in accordance with Client and project requirements and applicable codes and standards.
• Normally establishes estimation basis and prepares technical proposals for proposal projects in accordance with Client requirements and acceptable estimation and engineering practices.
• Normally coordinates with other discipline, vendors and/or sub-contractors to ensure conformity with project and Client requirements.
• Normally acts as KP of medium to large sized standard projects, exceeding 5,000 electrical engineering manhours.
• Perform discipline project control (schedule, BM/BQ & manhour) when assigned as Project Lead Engineer.
• Assists in implementation of Department training programs by functioning as a “trainer” or "mentor".
• Supports major phase of construction work, can assume responsibility as the Electrical Site Superintendent, Electrical QA/QC in charge, and Lead Field Engineer.
• Acts as the home base Lead Support Engineer when the major phase of the project has been shifted to site, such as purchasing of additional major equipment / material, coordinate / expedite vendors for the immediate supply of material exceptions, resolving major engineering conflicts within the approved specifications.
• Participates in site survey/ investigation of existing facilities to clarify feasibility of the design
• Participate in factory acceptance tests of electrical equipment to confirm suitability of equipment and ensure that the equipment is manufactured according to the agreed specifications.
• Performs other functions that may be assigned by superiors.

Competencies / Preferred Skills:

• Proficient in Microsoft Office Skills, AutoCAD and/or Microstation and common electrical calculation software.
• Familiar with local and international electrical codes, standards and regulations.
• Proficient in the design of electrical systems for oil/petroleum/industrial infrastructure industries.
• Familiar with ETAP and e-DPP software.
• Proficient in substation energization work.

Education Qualifications and other Requirements:

• Bachelor’s degree in Electrical Engineering.
• 15 years and above experience in electrical detailed engineering works of Oil & Gas, petrochemical and other related industrial plants, including five (5) or more years in frontend engineering and proposal / estimation works and additional five (5) or more years infield engineering works.

-Looking for SPM for civil, external, structural and interior fitting out works.

- To also be well verse with MEP, ACMV and architectural works. To chair meeting with client & consultant, to manage sub contractors, scheduling works. Authorities submission and laison with contractor PE for any design and submission as required.

-Develop, Monitor, update and report on project progress to ensure timely completion of work.

-Ensure compliance to quality and safety standards. Ensure workers adhere to safety regulations and are in a safe working environment.

-Liaise with sub-constructors, vendors, clients to ensure smooth progression and timely completion of quality works in accordance to schedule within required regulations,contract specifications.

-Lead a Project Team of consultants, contractors in daily-site activities.

-Minimum 10 years and above of working experience

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Applications are invited for the following full-time position in the Saw Swee Hock School of Public Health:

A research fellow position is available in the Saw Swee Hock School of Public Health to support the Principal Investigators in research projects in the areas of Environmental and Cancer Epidemiology.

Major duties and responsibility of the position include but are not limited to:
• Data collection and management
• Data analysis using software such as R, Stata or SAS.
• Preparation of reports, presentations, manuscripts.
• Writing grant proposals
• Provide mentorship to graduate students and research assistants

The candidate must be an independent, highly motivated, and mature worker who is well-organized and demonstrates a growth mindset. Strong written and verbal communication skills are required, along with a record of relevant publications in peer-reviewed journals. He/She must have strong interpersonal skills and the ability to work effectively with colleagues to achieve team goals. Excellent proficiency in the following areas is preferred:

1. Microsoft Office Applications, particularly MS Word, Excel, Powerpoint
2. Experience in R, Python

The successful applicant is expected to possess at least a PhD Degree in Epidemiology, Public Health, Environmental Health, Biological Sciences, Biostatistics, Data Science, preferably with relevant experience. Prior experience with machine learning is a plus.

Recruitment is open immediately and will continue until the position is filled. Applicants should send a brief statement of interest, CV, three named references, and other supporting documents during the application. In your statement of interest, please highlight your relevant experience and interest in environmental and cancer epidemiology research.

We regret that only shortlisted candidates will be notified.

Job Responsibilities

Drive Profitable Business Growth

• Develop and implement sustainable business and route-to-market strategies for export markets through collaborative partnerships with distributors.
• Utilize a data-driven approach to gain market insights and translate them into actionable business plans (e.g., Consumer, Channel, Customer Plans) to achieve business objectives.
• Collaborate with distributors to generate brand awareness and trial initiatives for JDE brands.
• Identify, research, and execute potential business opportunities in both existing and new markets.

Distributor and Stakeholder Management

• Select and manage distributors, including contract negotiations and relationship management.
• Negotiate and formalize agreements with distributors, taking into account trade allowances and contractual conditions
• Engage in channel and account planning activities, defining sales and go-to-market plans with distributors.
• Work with stakeholders to plan and organize resources, such as shipping schedules and marketing activations.

Pricing and Sales Management

• Optimize the positioning of global and local brands in export countries, aligning with growth and cost targets.
• Develop pricing strategies, including general pricing, promotional pricing, and trade margins, to meet targets within agreed pricing ranges.

Job Requirements

• Minimum 5 – 8 years in international commercial business
• Proven track record on defining and implementing the sales strategy in the best way in different countries.
• Proven ability to manage multiple distributors efficiently, driving sustainable and profitable business growth.
• Proven track record in leading and motivating sales teams to achieve targets
• Strong financial understanding, with experience in managing a P&L.

Overall Summary:

Senior Network Engineer will drive the implementation of strategy for infrastructure operations and maintenance to ensure availability of stable and secure systems. He/She manages project resource allocation and develops infrastructure implementation, operations and maintenance engineers; scopes out policies and sets performance expectations. He identifies problems and presents new methodologies and/or solutions to key stakeholders to enhance and improve the delivery of infrastructure operations and maintenance services.

Roles and Responsibilities:

Support infrastructure design and implementation

• Support technical system analysis to determine the extent to which solutions perform “as required” to ensure that future solutions meet anticipated demand
• Support the design and implementation of infrastructure solutions that adhere to current architecture standards
• Lead the design installations, system migration and integration
• Lead the testing and handover of implemented infrastructure solution

Support infrastructure operations

• Support delivery of optimal infrastructure operations
• Create documents on administration, installation, configuration and troubleshooting
• Apply diagnostic tools to perform technical analysis of complex software, hardware and infrastructure equipment
• Support the development of report on infrastructure capabilities and limitations

Maintain infrastructure

• Support the improvement of maintenance capability by using automation for upgrades, enterprise backup and storage
• Identify key infrastructure operations issues and maintenance priorities
• Support the implementation of agreed infrastructure change requests and maintenance routines
• Develop report on performance and availability of infrastructure systems by review of service uptime, utilisation, throughput etc.

Optimise infrastructure performance

• Support the initiatives to improve the infrastructure systems and service delivery through automation and virtualisation technologies
• Support the monitoring of performance, availability and security of infrastructure systems and key operational metrics

Resolve incidents

• Support problem/issue identification and resolution
• Escalate problems/issues
• Support simulation of user problems to resolve operating difficulties
• Diagnose problem source through discussions with users
• Recommend system modifications to reduce user problems
• Support planned maintenance events, system backup processes and disaster recovery drills
• Support implementation of preventive solutions

Qualifications/ Requirements:

• Bachelor in Computer Engineering
• Possessed CCNA, CCNP, CCIE is preferred.
• At least 5-8 years of network experience
• Experience in leading a team of 3-5 network engineer.
• Familiar with Cisco, F5, VM
• Exposure to large scale project execution
• Open to support patches/ upgrades and Tech refresh (after office hours/ weekends)

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]

We are expanding! Thrive is looking for cheerful, positive and patient Student Care Teachers to join its big family. Why join us? Thrive provides a positive, warm, friendly, work-life balanced environment. We work with our Student Care Teachers in developing the knowledge and skills to bring out their best talents.

Days: 5 days’ work week (Monday - Friday)

Working hours during school terms:

10:30 pm to 7:30 p.m. (8 hrs excluding 1hr lunch)

School holidays and adhoc school closure days:

Shift 1: 7.30 am to 4.30 pm

Shift 2: 10.30 am to 7.30 pm

Job Highlights:

• Training opportunities
• Medical/Insurance benefits

Job Roles & Responsibilities.

• Supervises and guides primary school students in their school homework, spelling and revision in at least three subjects (English/ Maths/ Science)
• Provides a positive, nurturing, safe & secure learning environment for students
• Maintains order in the classroom and ensure students' safety, welfare and security protocols are met at all times
• Conducts in-house enrichment classes and ensure lesson plans are delivered
• Marking of written work from enrichment programmes
• Maintains regular communication with parents on their children’s development
• Provides support in dismissal and any centre duties

Required Qualifications & Experience:

• Possess at least a good GCE 'O' Levels, ‘A’ Levels or Diploma
• Candidates with a WSQ Student Care certification will have an advantage
• Cheerful, patient and passionate when dealing with children
• Some relevant experience such as student care/ tutoring, and certification in student care would be advantageous
• Keen to teach young children between the ages of 7-12
• Possess genuine care for children and desire to nurture them holistically
• Good communication skills in order to liaise with the parents and students

About the role

ENGIE Services Singapore Pte Ltd is seeking a talented Business Development Executive to join our dynamic team in the West Region. In this full-time role, you will be responsible for driving new business opportunities and expanding our client base. This position offers an exciting chance to contribute to the growth and success of our organisation.

What you'll be doing

• Support the growth of ENGIE Services Singapore as a strategic FM partner to address the sustainability challenges of its clients.
• Build, grow, and strengthen relationships internally and externally with various stakeholders across the local and regional teams to achieve ENGIE’s purpose and set goals in carbon neutrality.
• Secure new and retain existing contracts to ensure that revenue targets are met according to budget.
• Prospect, present and constantly build a pipe of potential customers requiring our IFM / FM service.
• Understand the IFM market and work with the team to develop strategies to align with the market transformation and disruption.
• Be accountable for bids related management, either on an individual basis or supporting the team, depending on the nature of the bid.
• Conduct market research to identify new opportunities.
• Keep abreast of IFM trend and market transformation.
• Develop and pitch ideas to present company offerings and negotiate business deals.
• Assist in timely renewal of certification as required by the relevant associations / industry.
• Develop, maintain knowledge and intelligence of market trends and competitor landscape.
• Support new business initiatives and the Group’s strategy.
• Work closely with the leadership team to meet company objectives through timely and regular reporting of project status, outcomes and deliverables

What we're looking for

• Diploma / Degree in relevant Engineering / Facilities Management or related qualifications.
• Preferably possess experience in IFM industry especially in tender / bid management.
• Power driven and challenge seekers with ability to work and deliver under tight deadlines.
• Ability to work independently and possess good communication skills with cross-functional teams at all levels, effectively.
• Ability to bundle various solutions under the Group for our clientele base.
• Possess good analytical, business acumen and problem-solving skills.
• Proactive, immaculate and possesses good writing and presentation skills.
• Flair in communication and written abilities.
• Has a good safety mindset and displays good WSH behavior

What we offer

At ENGIE Services Singapore Pte Ltd, we are committed to providing our employees with a rewarding and fulfilling work environment. As a Business Development Executive, you will have the opportunity to contribute to the growth of our organisation and develop your skills in a supportive and collaborative team. We offer competitive remuneration, opportunities for career advancement, and a range of employee benefits to support your work-life balance.

About us

ENGIE Services Singapore Pte Ltd is a leading provider of sustainable and innovative energy solutions. Our mission is to accelerate the transition towards a carbon-neutral world through the development of clean energy technologies and the delivery of exceptional customer service. With a strong presence in the New Business Development sector, we are committed to driving innovation and shaping the future of the industry.

If you are passionate about contributing to our mission and joining a dynamic team, we encourage you to apply now.

Responsibilities:
• Assist the dentist on dental surgery procedures
• Assist the patients on their needs and enquiries
• Sterilisation and preparation of dental instruments
• Arrange/Schedule appointment for customers
• Other ad-hoc duties

Requirements:
• Possess at least O/A Levels or Diploma in any field
• Able to commit for at least 4 months (Starting Dec 2024)
• Able to commence work immediately or in short notice
• No experience needed, but must be willing to learn
• Keen interest in the healthcare/ medical industry

Working Hours

• Mon - Wed 9.30am - 8.30pm
• Thurs - Fri 9.30am - 5pm
• Sat 9.30am - 1.30pm

Responsibilities:

• Be a member of the Process Engineering Team for top quality servers & storage products, maintain and update end to end production process & value stream mapping, cover end to end production process for better efficiencies thru process optimization, layout/work station enhancement as well as smart factory / automation projects
• Cooperate with the NPI PM team, Test Engineers, Quality, Production, Planning, Logistic and other departments to support production, including audit
• Support NPI ramp with propose new equipment, manage equipment readiness to support LVO, Engineering Change and customer requirement
• Ability to perform first level process issue triage and resolve issues locally where possible, analyze and identify process issue and deficiencies with follow up actions for resolution and improvement to meet goal for cost, quality and delivery.
• Escalate any process issue found to have major impact on quality, process and or cycle time if not able to resolve locally

Skills and Requirements:

• Bachelor’s Degree in Electrical / Electronics Engineering
• 3+ years of relevant work experience is preferred
• Strong IT background, experience with SAP is an advantage
• Technically know-how on Kaizen, 6 Sigma, PFMEA, DOE and/or 8D is a plus
• Experience with server & storage product is an advantage

OTHER INFO:-

• Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]
• Working Days / Hours: 8am to 5.30pm / 8.30am to 6pm (Mondays to Fridays)

-----------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:
Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Responsibilities:

• Plan, schedule, update, and follow up on machinery servicing records to ensure optimal performance.
• Liaise with in-house mobile mechanics, the warehouse department, and site in charge regarding machine servicing schedules and parts availability.
• Any other ad-hoc duties as and when assigned

Requirements:

• O Levels
• 1 years relevant experience
• 5-day work week
• Company transport provided

The appointee will be part of the Finance team and be responsible for duties primarily related to Assets and CET Operations.

Responsibilities:-

• To be involved in Digital Workplace Asset Management System (DWPAMS) project including assisting Finance to answer queries raised by S&Ds, guide S&Ds in the asset tagging process and any other works which may arise in the process
• To be involved in Continuing Education & Training (CET) operations which includes submitting einvoices, preparing receipts and refunds and any other works which may arise in the process

Requirements:-

• Diploma & above with experience of less than 3 years
• Proficient in MS Office applications
• Able to operate basic software and hardware tools such as the AMS software, asset tag printer, asset tag scanner and mobile phone reader
• Good team player who is self-motivated and can complete task within deadlines set
• Able to work independently
• Possess good communication and interpersonal skills
• Possess problem solving skills

Working Hours:

Mon - Thur: 8.30am-6.00pm

Fri: 8.30am-5.30pm

Contract Duration: Up to 7 months starting from December 2024

Fabrica AI Full time Electrical Engineer - Invention of Automatic Tile Grouting Robots

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your role would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. The following tracks are available:

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. If you like this process, you’d be a good fit for us.

Check out the link above for more information, and send your CV to [email protected]

Job Description

We are representing a global client in search for a motivated and experienced Rider Manager to oversee our delivery operations.

Key Responsibilities:

• Rider Recruitment and Training:Oversee the recruitment process for riders, ensuring that new hires are effectively onboarded and trained according to company standards.
• Performance Management:Monitor and enhance rider performance utilizing the company’s star-rating evaluation system to ensure compliance with platform standards.
• Team Leadership and Support:Provide daily assistance to the rider team, addressing any challenges they encounter on the job and fostering team cohesion and morale.
• Rewards and Incentive Management:Manage and implement the company’s rider reward mechanisms, including star bonuses and the monthly reward pool system.
• Complaint and Dispute Resolution:Address and resolve rider-customer disputes or complaints promptly, ensuring efficient management of issues while maintaining the company’s reputation.
• Data Analysis and Reporting:Regularly analyze rider performance data, generate reports, and propose improvements to enhance overall operational efficiency.
• Policy Enforcement:Ensure that riders comply with platform operational policies, including penalties for lateness and order cancellation rates.

Job Requirements:

• Experience:At least 3 years of team management experience, preferably in the delivery industry or a related field.
• Leadership:Strong leadership skills with the ability to motivate and guide teams toward high-performance goals.
• Communication:Excellent communication skills to maintain effective interactions with riders, customers, and internal departments.
• Problem-Solving:Ability to solve complex issues and make quick decisions under pressure.
• Data Analysis:Proficiency in using Excel or other data analysis tools for making data-driven operational decisions.

Regret to inform that only shortlisted candidates will be notified.

www.dadaconsultants.com

EA Registration Number: R1878287

Business Registration Number: 201735941W.

Licence Number: 18S9037