Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Purpose:

Provide basic nursing care to Day Care Centre clients under the supervision and direction of Centre Manager.

Job Description:

1. Perform health assessment to new clients upon admission to the Centre.

2. Perform basic nursing care procedure and personal care activities to clients based on the individualized care plans.

3. Provide training and support to caregivers & nursing aides.

4. Oversee client's medical & nursing need and maintain up-to-date documentation of clients’ conditions and care treatments.

Job Requirement:

1. Enrolled Nurse registered with Singapore Nursing Board

2. NITEC in Nursing with 2 years of clinical experience for Enrolled Nurse position.

3. Expiernece working with elderly and/or persons with dementia

4. 5 days work week (Mon-Fri)

Responsibilities:

• Lead full spectrum of Project Management including Overall Procurement, Construction, Manpower Planning, Testing and Commissioning.
• Involve work force arrangement for Plumbing, Sanitary , Gas and Precast yard services.
• Budget and Cost Control.
• Preparation of Progress Claims.
• Coordination and liaison with Clients, Consultants, Architect, Authorities, Project teams, Sub-contractors and Suppliers.
• Daily Operations for all the projects and maintenance.
• Prepare Agenda, Follow up agenda.
• Whole In Charge of Procurement, HR and Safety Department
• Able to prepare full set of Accounts and liaise with the Auditor.

Requirements

• Degree / Diploma.
• Min 5 years of relevant work experience in similar capacity in Plumbing & Sanitary Services.
• Highly motivated and possess strong leadership qualities and the ability to work independently in a challenging environment.
• Able to communicate effectively at all levels.
• Able to liaise with mandarin speaking sub contractors.
• 6 Days work

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Established in 2010, the Energy Research Institute @ NTU (ERI@N) is a pan-university research institute that focuses on systems-level research for tropical megacities. It performs translational research that covers the energy value chain from generation to innovative end-use solutions, motivated by industrialisation and deployment. ERI@N has multiple Interdisciplinary Research Programmes which focus on translational Research, Development & Deployment which focus on specific area of the energy value chain, and a number of Living labs and Testbeds which facilitate large scale technology deployment enabling validation and demonstration of real-world applications.

We are looking for experienced individuals with a strong background in thermal energy systems, computational modelling, and machine learning. The hired researchers will join an interdisciplinary team to develop innovative integrations of advanced thermal energy storage solutions and computational techniques, focusing on discovering novel materials and optimizing energy systems through CFD and machine learning. Promising solutions developed will be experimentally validated, demonstrated and potentially commercialised at ERI@N.

• Develop new materials for energy storage and thermal management.

• Lead in experimental work, design and conduct experiments to validate the discovery.

• Assist or conduct computational fluid dynamics (CFD), molecular dynamics (MD), and/or density function theory (DFT) studies for energy material development

• Assist or conduct artificial intelligence (AI) techniques for material discovery and/or device design

• Conduct other required works by the PI

• Write scientific papers/technology/reports and other work-related documents

Key Responsibilities:

• Develop new energy storage materials.
• Design experimental facilities and conduct experiments for energy storage technologies.

Job Requirements:

• PhD degree in Material Science, Chemistry, Mechanical Engineering, Chemical Engineering, Mathematics, or equivalent disciplines from a prestigious university
• At least 1 year of research experience with python, Matlab, or C++
• Experience in CFD/DFT/MD is preferable
• Experience in machine learning is preferable
• Experience in thermal energy storage, hydrogen, and energy systems is preferable

We regret to inform that only shortlisted candidates will be notified.

• Creating long- and short-term plans, including setting targets for milestones and adhering to deadlines
• Delegating tasks on the project to employees best positioned to complete them
• Making effective decisions when presented with multiple options for how to progress with the project
• Serving as a point of contact for teams when multiple units are assigned to the same project to ensure team actions remain in synergy
• Communicating with executives or the board to keep the project aligned with their goals
• Performing quality control on the project throughout development to maintain the standards expected
• Adjusting schedules and targets on the project as needs or financing for the project change

Loading and unloading of material from the truck.

Perform daily routine checks and maintain the general cleanliness.

Conduct daily checks to ensure that the vehicle is in a good and safe condition.

Driving in a safe manner at all times and adhering to traffic rules & regulations stated in the Road Traffic.

Min 3 years of experience

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

(Annual Gross Salary: S$46,000 to S$50,000)

• Ensure safe and optimal operation of process units
• Ensure workplace safety by proper asset upkeep, supporting function testing on safeguarding system and proper control on work activities in the plant
• Participate in plant shutdown & start-up and process unit troubleshooting work activities

• Diploma or NITEC in Chemical Process Technology (Petrochemicals or Pharmaceuticals) OR
• At least GCE "O" level with credits in English, Mathematics, Science (Physics or Chemistry)
• Fresh ITE / Polytechnic engineering graduates are welcome to apply as training will be provided

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Investigate and analyse incidents pertaining to rotating equipment failure or malfunction in order to identify root causes of problems and recommend & implement solutions.
• Identify, analyse and troubleshoot machinery deficiencies and make recommendation for improvement.
• Monitor and review implementation of Preventive Maintenance program to achieve high plant availability.
• Monitor Condition Monitoring program, analyse and propose recommendations for predictive maintenance.
• Establish programs and initiatives to maximize plant availability and equipment reliability

• Degree in Mechanical Engineering
• At least 4 years' experience in maintenance of plant equipment especially rotating machinery, preferably in oil/petrochemical or related industries

Job Description

• Conversant of purchasing exercise and familiar with associated contractual terms and conditions for Procurement Works
• Maintain procurement records and documentation.
• Communicate and work very closely with the project team for preparation of the invitation of the request for Proposal and administering of the purchase requisition and award consent with the project team.
• Collaborating with procurement team in day-to-day procurement operation.
• Collaborating with Project Leads in project budget monitoring.
• With experience in auditing and its procedures and compliances.
• With good oral and written command in English and with effective communication skills with all levels and he/she shall be proficient in Microsoft Office Suite including MS Word, Excel and Power Point.

Requirements

• At least 3 years working experience and with either a Diploma or Degree in Engineering, Science, Construction Management.
• With good knowledge and experience in procurement role in the past covers purchasing and associated contractual administration works.
• Positive thinking and with supportive atmosphere amongst the procurement team
• Preferably with those with at least 2 years of experience in water and wastewater or waste to energy industries
• Preferably with those with good knowledge of mechanical works cover fabrication and piping works

Job Description

• Assists management in office administration and administrative duties for transportation department
• Assist in preparation of payroll and salary allocation reports.
• Manage and prepare correspondences, quotations, billings and all reports.
• Ensure proper documentation and control of Letter of Employment and other relevant documentation.
• Manage drivers’ database and maintain record of drivers’ attendance/ movement chart.
• Assist in traffic accident / incident reporting and insurance submission claims
• Responsible for timely & accurate data entry and inputs.
• Ensure smooth and efficient circulation of documents within departments.
• Other ad hoc job assigned by superiors

Requirements

• Candidate must possess at least a Diploma / Degree in Business Studies/Administration/Management.
• At least 1 year's relevant working experience
• Required skill(s): MS Office, MS Word, Power Point
• Applicants must be willing to work in Benoi Crescent.
• Transportation services provided at Kranji, Choa Chu Kang and Pioneer MRT station.
• 5 working day

Job Description

• Provide administrative support to Purchase Department
• Liaise and follow up with suppliers / vendors
• Make sure correct items quoted & match with site requirement
• Matching of supplier’s invoices with supporting documents such as PR, PO & DO
• Prepare relevant reports for purchasing
• Assist in obtaining quotes from suppliers
• Daily reconcile diesel usage, billing and ordering
• Monitoring tanker fleet status
• General Data Entry & Filing
• All other related or ad-hoc duties as and when required.

REQUIREMENT

• Candidate must possess at least a Degree in Business Studies/Administration/Management.
• At least 1 year relevant working experience
• Required skill(s): MS Office, MS Word.
• Preferably with experience and knowledge in order processing for spare parts
• Applicants must be willing to work in Benoi Crescent.
• Transportation services provided at Kranji, Choa Chu Kang and Pioneer MRT station.
• 5 working days

Based in Tuas (Transport provided)

Company Benefits:

• 37.5 hour work week (additional hours is paid OT)
• $499 worth of annual vouchers to buy Coca Cola products
• 18 days annual leave
• Medical coverage + Dental - $400 / year
• Medical & Dental coverage for self AND dependents
• 2 way transportation for both shift timings from 18 pick-up points island-wide
• 5 days work week
• Rotating shift: Morning (7:30am – 4pm), Afternoon (3:30pm to Midnight)

Pacific Refreshments Pte Ltd (Coca-Cola Singapore) is a strategic concentrate manufacturing plant in Asia. We are an export facility, specializing in the manufacturing of concentrates and beverage bases, with a complex portfolio, supporting the ASEAN, South Pacific and Southwest Asia business units. We are on a journey of growth - having completed the construction and expansion of our site towards doubling our manufacturing capacity in recent years. We have also embarked on our digital transformation journey, striving to be the Lighthouse for the Consumer Products Supply (CPS) plants in Asia and to be a leader in digital transformation.

We champion a safety-first culture, dedicated to protecting our employees' well-being and fostering a secure workplace that values each individual.

Pacific Refreshments Pte Ltd is a winner of the ‘2020 HR Asia Best Companies to Work For’ Award.

Job Summary

The main function of this job is to generate maximum output of quality products through effective use of assigned resources and assets. To achieve this goal, this position has:

• technical skills in optimizing / maximizing production, yield and product quality
• implement and maintain quality systems, improvement projects and other initiatives.
• tasks in line operation (at least 3 different work stations)

Operation and performance

• Achieve line and batch efficiency and output requirements as targeted by superior / management.
• Maximize output by reducing downtime through monitoring and controlling changeover / maintenance / breakdown time.
• Produce the right quality by managing all CCPs and quantity according to the process order.
• Ensure proper product labelling, coding and other information accurately.
• Carry out the right cleaning, sanitation and GMP according to Quality System requirements.
• Proper handover before going on leave / changeover shift.
• Follow strictly safety and environment requirements at the workplace.

Improvement projects

• Support various initiatives by contributing idea, hands on experience, solutions and others.
• Assist to conduct trials, collect data and trouble shoot machines as and when it is necessary.
• Participate in root-cause analysis and corrective action development sessions as required.

Job Requirements:

• Preferable 1 - 2 years experience in food manufacturing company in similar position. Other manufacturing and electronics industries are welcome too.
• Good technical knowledge and skills in line operation and machine maintenance/repair.
• Nitec / Diploma in Engineering or related technical field.

Job Description

• Oversee Construction Planning, Scheduling and Tracking of projects
• Obtain inputs from project team members, contractors, suppliers and client to support the development of a baseline schedule, and subsequently to update schedule progress and forecasting
• Coordinate with QS Section on progress claims
• Oversee monthly cash flow, projection and monitoring
• Mentor engineers for daily, weekly, monthly reports
• Highlight to the Project Team any potential delay and risk claim and delay analysis
• Maintain project baseline schedule, update project schedule periodically and analyze effects of any proposed changes/additional activities on the project
• Propose recovery strategy and draft recovery schedule when required
• Produce project progress reports and narratives on project status including the production of graphs, critical paths, risks tables, etc.

Requirements

• Degree in Building Construction Management / Mechanical Engineering or equivalent
• At least 5 to 10 years of relevant experience in the construction industry preferably in water or wastewater projects.
• Good understanding of procurement, engineering and construction sequence
• Good writing and interpersonal skills
• Familiar with BIM
• Proficiency in Primavera P6 is mandatory
• Positive working attitude and ability to work in a fast-paced environment

Job Description

• Review engineering drawings, specifications, and technical submittals to ensure alignment with project requirements.
• Collaborate closely with multi-disciplinary teams to integrate MEICA systems seamlessly into existing building design, ensuring compatibility and optimal operation.
• Conduct technical reviews of MEICA engineering designs and proposals, recommending improvements to optimise equipment constructability and efficiency.
• Develop MEICA construction plans, sequencing, resource allocation, and logistical considerations.
• Prepare cost estimates for MEICA components and services, considering design changes and project specifics.
• Provide technical leadership in the installation of MEICA systems.
• Oversee the entire MEICA construction process, ensuring strict adherence to technical specifications, industry standards, safety standards, and best practices.
• Supervise and mentor MEICA construction team, subcontractors, and vendors.
• Collaborate closely with the client / stakeholders, addressing technical inquiries and ensuring MEICA systems align with their operational requirements.
• Enforce strict safety protocols and industry regulations on the construction site.
• Provide regular project updates, technical reports, and installation strategies to clients and stakeholders.

Requirements

• Bachelor's degree in Civil, Mechanical or Electrical, or a related field.
• 15 years of experience in the planning and construction of waste to energy plants or major process industry / industrial / infrastructure projects.
• Proven track record as a MEICA construction manager in large scale projects, managing internal / external stakeholders – HSE, QA, Subcontractors, Suppliers, Client, Authorities.
• Proficiency in planning, scheduling, and resource management
• Ability to identify and address construction challenges and issues promptly.
• Excellent organizational and problem-solving skills, with the ability to prioritise tasks and manage multiple tasks simultaneously.
• Strong communication and interpersonal skills to collaborate effectively with various stakeholders.
• Demonstrated leadership abilities and the capacity to motivate and develop a team.
• Knowledge of safety and regulatory compliance requirements related to construction logistics.
• Flexibility to adapt to changing project needs and work in a fast-paced construction environment.
• Profound knowledge of MEICA systems and technologies.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.

Job Description

• Oversee various stages of full project deliveries covering requirements gathering and analysis, design, construction, delivery, integration, testing, commissioning, and maintenance services
• Map out the overall project management plan and ensure that the roles and responsibilities, objectives, commitment, deliverables, schedule, and risks are clearly defined and communicated to team members and customers
• Establish a risk management plan for a structured approach to identify and review potential risks and mitigation actions
• Manage project budget and costs with the objective of maximizing revenue and margin achievements.
• Establish a project execution plan and schedule for tracking of deliverables within the scheduled milestones
• Build a high-performance delivery team, comprising both onsite and offshore resources, and provide effective leadership for the team members
• Oversee the entire project delivery life cycle within scope, schedule, and budget
• Maintain a pro-active and responsive relationship with all stakeholders, both internal management and customers, to provide regular and accurate progress updates, problem reporting and resolution processes
• Perform other duties as assigned

Requirements

• Min Degree in Mechanical / Electrical / Environmental Engineering (Degree must be recognized by the Professional Engineers Board, Singapore)
• At least 10 years of relevant experience in the implementation and management of qualify control systems
• Hands-on” attitude, meticulous and analytical with excellent problem-solving skills
• Professional project management certification (e.g. PMP, CITPM, etc) is preferred
• Team player with good interpersonal and communication skills
• Able to work under pressure, resourceful and independent with good negotiation skills

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for FP & Plumbing system installation and troubleshooting on site
• Prepare material requisition for all FP & Plumbing equipment and materials
• Prepare work programme for FP & Plumbing works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of FP & Plumbing system, including detailed design, calculation, shop drawings, pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with FP & Plumbing suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for FP & Plumbing system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all FP & Plumbing equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling FP & Plumbing works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in FP & Plumbing design calculations and Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

At SHM Shipcare (Singapore) Pte Ltd, we provide a one-stop solution for the marine industry in supplying products and services through a network spanning over 11 port cities along the Indian coast and across coasts of Singapore, Malaysia, Sri Lanka and UAE.

We are looking to hire an Office Admin Assistant in our Singapore office and shall be responsible for the following:

Desired Candidate Profile:

Candidate must have prior experience in handling Accounts and Inventory

Accounting

1. Verify and Manage all entries of sales, purchase and banking documents
2. Prepare monthly reports and submit to reporting manager on a monthly basis.
3. Provide monthly closure to accounts and submit to the Reporting Authority.
4. Provide assistance to internal teams if any on a daily basis

Inventory

1. Receive, distribute and maintain adequate quantities of stocks at all times
2. Maintain optimal stock levels
3. Review physical inventories periodically
4. Maintain stock and consumption records
5. Check incoming materials for quality, and quantity against invoices, purchase orders and packing slips or other documents
6. Make clear notes on the receipt of the items against each invoice.
7. Keeps and updates records of good received and issued.

General Duties

1. Perform related duties and responsibilities as assigned
2. Responsible for cleanliness of the stor3
3. Execute any other jobs assigned by the management.

Competencies Preferred:

Import and Export Knowledge,

Knowledge of Office (Excel)

Knowledge of Inventory Management

Record Keeping

Basic Marine-Engineering Knowledge

[Main duties and responsibilities]

• Handle AP/ AR/ Invoicing/ Payments/ Collections up to month end closing.
• Prepare closing journals entry, update all balance sheet related schedules.
• Check staff claims.
• Manage Fixed Assets Register and Assests under Construction.
• Preparation of GST & tax for filing.
• Assist with SAP software implementation.
• Complete monthly reconciliation of bank, debtors, creditors, and inter-company balances.
• Provide support to the superiors in analysis and study of ad-hoc projects.
• Any other assignments from time to time.

[Job Requirements]

• Diploma in Accounting or equivalent professional qualification
• Proficient in Microsoft Excel and Microsoft Office software
• Experience with Accounts Payable and Accounts Receivable
• Minimum 2 years of working experience in Financial Accounting
• Mature personality with excellent interpersonal and communication skills
• Ability to work independently with emphasis on accuracy and timeliness

The Engineering Specialist works with engineering departments to develop, implement, and deploy approved operational processes and best practices consistently throughout the company. This position will assist the I.E. departments in special reengineering or new projects, as necessary. The Engineering Specialist will take a lead role in planning and execution of large project implementations or training initiatives. He/She may also manage other subject matter experts to ensure timelines and project deliverables are met and developing Web Application training material for use by Operation Trainers. This position may also be responsible for coordinating Operation Trainers efforts in field training.

Responsibilities:

• Be the main point of contact for WMS related activities.
• Involve in continuous improvement initiatives.
• Work closely with Operation on daily operation issues, troubleshooting and prevention.
• Participate in new businesses project implementation.
• Gathers and analyzes data necessary to develop work measurement.
• Maintains data within operating plans to highlight conditions and areas for potential change.
• Verifies the proper application of work measurement to ensure accuracy.
• Develops action plans and obtains management corrective action commitments.
• Assesses the impact of long- and short-range forecasts on operating plans.
• Maintains forecasts, operating plans, and tracking spreadsheets for future reference.

Qualifications:

• Possess a Bachelor’s Degree in Engineering or equivalent fields
• Displays understanding of operational barriers and failures, and identifies/improves designs, methods, processes, and flows through collaboration
• Technical minded with ability to resolve issues related to information systems reporting, report generation and storage, customized reports, and data integration, and writes complex queries and creates databases as needed
• Prior Industrial Engineering experience is preferred
• Prior experience using advanced Access and Excel functionalities, (Pivot tables, V-look ups, database creation/maintenance, etc.) is preferred
• Availability to work flexible shift hours, including weekends and travel is preferred/a plus.
• Note: There may be opportunities to convert to permanent based on performance during the contract tenure.

Addcel are looking for Senior Project Engineer who has experience in Project Implementation for Mechanical works especially Piping, Structural Steel and Tankage works. Follow through the whole project lifecycle from estimation, tendering, detail engineering to project management and implementation.

Responsibilities:

• Estimation and MTO
• Tendering & Proposal
• Value and Detailed Engineering
• Drafting using AutoCAD
• Project Planning, Documentation and Support
• Capture project progress and additional/ change orders
• Others as and when required by the management.

Requirement:

• Min. 2 - 5 years of relevant working experiences
• Min. Degree in engineering or equivalent
• Excellent skill in MS Office

Introduction:

The Energetix Sustainability Suite is an Enterprise IoT platform using AI to integrate sensor data streams and intelligent controls to perform Energy Monitoring, optimise Lighting, Plug Loads and ACMV, manage Air Quality, Occupancy and Data Centre Infrastructure. Our customers have reduced energy consumption by up to 40%.

We are looking for a candidate passionate about reducing carbon emissions in the built environment through intelligent energy management.

Job Description:

• Overall responsible for all aspects of the project implementation lifecycle. Plan, coordinate, and execute IoT deployments to help digitalize the built environment, including the site assessments, installation and configuration of devices and sensors to monitor and optimize energy consumption. Collaborate with multidisciplinary teams, including software engineers, data analysts, and facility managers, to design and implement effective monitoring and control solutions. Provide field technical support and maintenance for projects, working closely with Helpdesk to troubleshoot and fix site related issues. Document project progress, findings, and recommendations for continuous improvement.
• Analyze and interpret data collected from IoT devices to generate actionable insights for clients and stakeholders and to feed AI engines. Provide technical support and training to clients and end-users on the operation and maintenance of IoT systems. Instrumentation / IoT Devices will include electrical meters, BTU meters, IAQ Sensors, Controllers and various types of sensors and controllers as well as interfacing with Building Management Systems and PLCs.
• Work closely with Account Managers, Consultants and Contractors to engage customers, drive understanding of our solutions, influence tender specifications, qualify and perform demos and POCs and Pilot projects.

Job Requirements:

• Degree or higher in Building, Civil/Mechanical/Electrical/Computer Engineering, Computer Science, Electronics or equivalent.
• At least 5 years of Engineering/IT experience, preferably in Building Services or Industrial Automation with good knowledge of automation, PLCs, SCADA, Building Management Systems, M&E systems, RTU devices and networking equipment.
• Good interpersonal and communication skills, passionate about technology, capable of working independently, and highly organized with strong attention to detail.
• Willing to travel within Singapore and Johor Malaysia.

JOB RESPONSIBILITES

· Conduct Market research to identify business opportunities by finding prospects and evaluating their position in the industry.

· Researching and analyzing sales options sought by the customer through cold calling, networking and social media.

· Establish contact and develop relationships with prospects face-to-face and telephone, meeting with potential clients and listen to their requirements and work with technical staff to recommend engineered solution.

· Maintain relationships with customer by providing support, information and guidance.

· Identify product improvements or new product by remaining current on industry trends market achieves and competitions.

· Prepare and delivery appropriate presentation on products/services.

· Create frequent reviews and reports with sales and financial data.

· Ensure the availability of stocks for sales and demonstrations.

· Participate on behalf of the company in exhibitions or conferences.

· Negotiate/Close deals and handle complaints or objects.

· Report weekly/monthly customer base (Existing & New) with clear actions.

· Work collaboratively with team members and reach the sales targets set by manager and achieve better results.

· Maintain quality service (ISO) by establishing and enforcing organizational standards.

JOB REQUIREMENTS

• Diploma/ Degree in any fields
• At least 3 years of working experience as a sales personnel
• Preferably with prior sales experience in Management Systems (ISO 9001, ISO 14001, OHSAS 18001), training courses or similar background
• Possess good knowledge in MS office Applications
• Possess good communication skills, positive working attitude and be able to relate well with people
• Self-motivating to achieve, self-driven and exceed sales targets