• To promote a Zero Harm culture & best practices through the implementation of a tailored safety, quality and environmental management system including the development and implementation of appropriate policies & procedures to ensure a safe and efficient workplace.
• To ensure regulatory compliance & due diligence to safety, health, quality, dangerous good/hazardous substances and environmental obligations.
• To liaise with all business units on matters relating to safety, quality and environment including potential non-compliance of a regulatory nature.
• Compliance with all relevant safety, quality, environmental & P&C policies & procedures to ensure a safe work environment at all times.
• Actively liaise with all departments to ensure quality control, quality assurance and safe practices are adhered to at all times.
• Work with A-Gas management to implement its policies, procedures, work instructions, mission and goals.
• Lead by example in demonstrating personal qualities, behavioural traits and A-Gas values & behaviours.
• Timely management reporting in the manner and form as required from time to time.
• Perform site inspections as required.
• Actively participate in internal & external project meetings and provide sound recommendations on SQE initiatives and/or highlight any deviations & possible risks if any.
• Manage & maintain integrated certified Safety, Quality, Environmental management systems to ensure continued compliance to ISO 9001, ISO45001, ISO14001, ISO17025 (NATA), and other relevant standards like ISO 31000 where applicable.
• Identify and maintain compliance to relevant WHS, Environmental & other acts, regulations, codes of practices & guidelines etc.
• Audit SQE Management System, including reviewing, monitoring, measuring, reporting on performance.
• Recommend and implement continual improvement to the SQE system, work instructions and associated processes.
• Promoting awareness of SQE requirements, communicating and consulting with all staff & other stakeholders on SQE processes, documentation and regulatory requirements.
• Development and implementation of SQE documentation relevant but not limited to procedures, plans, hazard and aspect identification, risk assessments, emergency preparedness & response, design & development, management of change, control measures, management review including ad hoc measures based on current environmental occurrences.
• Actively lead & participate in Operational Safety, Process Safety, Risk Assessment, HAZOPs, Pre-Purchase Risk Assessments, Management of Change & Design & Development, SQE incident investigation & root cause analysis and processes.
• Active participation and collaborating to provide SQE / technical advise as required to the Lab Team, Customer Service, Operations, Engineering, Rapid Recovery and wider A-Gas Group & other relevant stakeholders.

Authorities and Responsibilities

1. To interpret technical drawing and performing machining process and requirement to produce the workpiece.
2. To perform machine code programming.
3. To operate, set up parts and producing parts as per drawing specification.
4. Guiding and providing operator/machinist with basic instruction in operating the machines.
5. Design simple jigs & fixtures for machining process if required.
6. To trouble shoot on dimensions non-conformance and provide corrective action and remedy

Competence Requirement

· Preferred to have NTC/ Diploma in Precision or Mechanical Engineering.

• Having 2 years of related experiences in related field is required for non-technical applicant.
• Able to interpret technical drawings and having machining knowledge.

Job Description:
We are looking for a passionate and creative Marketing Executive to join our team. The ideal candidate will be responsible for developing and executing digital marketing strategies to increase our online presence, engage our audience, and drive sales growth. If you have a knack for storytelling, a keen eye for design, and a deep understanding of digital trends, we want you on our team!

Key Responsibilities:

• Develop, implement, and manage digital marketing campaigns across various channels, including social media, email, SEO, and paid advertising.
• Create engaging and relevant content for social media platforms, website, and email newsletters.
• Monitor and analyze the performance of digital marketing campaigns, providing insights and recommendations for improvement.
• Manage the company's social media accounts, including content creation, scheduling, and community engagement.
• Collaborate with the design team to create visually appealing graphics and videos.
• Conduct market research to identify trends and opportunities for growth.
• Stay updated with the latest digital marketing trends and best practices.
• Coordinate with external vendors and agencies as needed.

Requirements:

• Min Diploma in Marketing, Communications, or related field.
• At least 1 year of relevant experience in marketing.
• Proficient in using social media platforms (Facebook, Instagram, LinkedIn, etc.) and digital marketing tools
• Excellent written and verbal communication skills.
• Creative mindset with a strong attention to detail.
• Ability to work independently and as part of a team.
• Knowledge of graphic design software (Adobe Creative Suite, Canva) is a plus.

Interested applicants, you may either apply via here or sent an email at [email protected].

At present, we do not require assistance from recruitment agencies. All applications should be submitted directly by candidates.

Job Responsibilities:

• To carry out and execute all daily jobs received from customers and ensure that all information is relayed down to the respective Operations Teams at the end of the day
• To perform billing and ensure the accuracy of the invoices raised
• To perform data entry into the respective systems in an accurate and timely manner
• To attend to customers’ requests or calls in a timely and professional manner
• To perform filing when the job is completed
• To ensure that all complaints/feedbacks received from customers are escalated to the Customer Service Lead, as well as any other matters which needs to be known by the Customer Service Lead
• To provide the necessary training and guidance to his/her assigned buddy
• To do up any reports as and when assigned to by the Customer
• To assist in extracting of information as and when required
• To verify contractor’s invoices as and when required
• To co-ordinate with external parties/approved contractors and ensure jobs are carried out per instructions
• Acquire a thorough understanding of key customer needs and requirements
• Develop SOPs for major clients and ensure necessary training materials being disseminated to relevant parties
• To assist in sending out quotations if assigned by Account Manager or Customer Service Manager and escalate to Account Manager or Customer Service Manager when in doubt
• To assist the Lead for any tasks assigned to from time to time

Key Competencies(Logistics Service)

• Well verse in handling and managing Transportation, Coordination with operations team, License/Bonded/DG Warehouse Inventory and activities.
• Able to co-ordinate well with Singapore Customs on any related matters
• Meticulous and experience in different type of permit declaration – License/Bonded/DG clearance permit declarations.

Job Requirements:

• GCE ‘O’ Level or relevant education qualifications
• Entry-level/no working experience are welcome to apply and training will be provided
• Possess knowledge of procedures and relevant systems to carry out daily jobs with ease
• Possess good communication skills to ensure that customers and internal stakeholders
• Attentive and detail-orientated
• Able to work under stress and pressure
• Good teamwork and problem-solving skills

Benefits:

• Daily Lunch Provided
• Company Transport Provided at designated MRT stations (Lakeside, Boon Lay & Woodlands)
• Medical and Dental benefits
• Attractive Bonus Scheme (AWS, Special Bonus etc.)

• Working experience as admin / fresh graduate is welcome to apply, training provided
• Process on customers’ P/O into system
• Verify selling price & part revision is correct
• Inform Director for new part revision & selling price needed
• Follow up with customer on revised PO
• Link Sales order to job traveller into system
• Issue Job Traveller & drawing to production
• Follow the cancelled job traveller & retrieved back from production
• Filling completed job traveller
• Co-ordinate with various departments to ensure delivery commitments to customers are fulfilled
• Able to communicate well with customers directly by answering phone calls and emails
• Respond and follow up promptly to customer enquiries and feedback on orders, as well as about the goods our organisation provides
• Data entry
• Administrative duties (data entry, filing and scanning etc.)

Other ad-hoc duties as assigned by supervisor

Qualifications for Data Entry

• Exceptional knowledge of office computer systems and software
• Experience working in data entry software and maintaining detailed information regarding available stock and supplies or other data
• Ability to effectively work within record software and update files accurately

Employment Type: Full-time

About Us:
WF2 is a leading sub-contractor specializing in high-quality P&S infrastructure and building projects. We are committed to delivering excellence and seeking talented professionals to join our dynamic team.

Position Overview:
We are looking for an experienced Mechanical Drafter cum Quantity Surveyor (Plumbing & Sanitary) to join our team. This individual will be responsible for preparing detailed plumbing and sanitary system designs and drafts while managing project quantities, cost estimates, and budget monitoring. The ideal candidate will have a solid background in mechanical drafting, with a specific focus on plumbing and sanitary systems, along with strong skills in quantity surveying.

Key Responsibilities:

• Prepare detailed mechanical plumbing and sanitary system drawings using CAD software.
• Develop and review detailed plumbing and sanitary system layouts and specifications.
• Perform quantity take-offs, cost estimation, and budgeting for plumbing and sanitary works.
• Prepare and maintain accurate records of materials, labor, and associated costs for plumbing projects.
• Collaborate with project managers to ensure designs align with project requirements.
• Assist in reviewing contracts and tender submissions for plumbing and sanitary systems.
• Ensure compliance with local codes, regulations, and company standards.
• Monitor and track project progress, adjusting designs or estimates as needed.
• Provide support during the construction phase, including site visits and addressing technical queries.

Qualifications & Skills:

• Diploma or degree in Mechanical Engineering, Drafting, Quantity Surveying, or related field.
• Proven experience (3 years) as a Mechanical Drafter with a focus on plumbing and sanitary systems.
• Strong knowledge of plumbing codes, standards, and regulations.
• Proficiency in AutoCAD, Revit, and other relevant drafting software.
• Experience in cost estimation, quantity take-offs, and budget management for plumbing systems.
• Excellent communication, organizational, and time-management skills.
• Ability to work both independently and as part of a team.
• Detail-oriented and able to handle multiple projects simultaneously.
• Knowledge of building codes and safety regulations related to plumbing and sanitary systems.

Preferred Qualifications:

• Experience working with large-scale construction projects.
• Certification in Quantity Surveying.
• Familiarity with CAD and other technical skills required.

Brief Summary

• Basic $8000 + AWS + VB + Medical benefits
• 5 Days : 8.30am-5.30pm
• Working Location @ West
• AL 14 Days, Birthday Leave, Annual health check-up, Customized Gift for holiday season
• Oversea training in Shanghai

Responsibilities

• Defining test plans, analyzing device performance, and contributing to the development of next-generation products.
• Define design verification test plans, analyze device performance, and provide feedback for design improvements.
• Perform detailed characterization of active and passive integrated photonic devices at the chip-level and wafer-level.
• Develop software for data post-processing.
• Participate in R&D projects for the development of next-generation products.
• Hands-on experience in characterizing active and passive integrated photonic devices, including various optical-optical (OO), electro-optical (EO), and optoelectronic (OE) measurements at DC and AC levels.
• Expertise in optical alignment and electrical probing procedures.
• Experience in test setup development, maintenance, and equipment resourcing.

Requirements:

• Min 5 year relevant experience
• Proficiency in handling mechanical, electronic, or automated equipment.
• Singaporean only

For consideration, kindly submit your CV by clicking “APPLY Now” or email to [email protected]

**Only shortlisted candidate would be notified**


EA Reg. No: R1988238 | Erlynn Tay Kim Geok

The Physical Education and Sports Science (PESS) Department at the National Institute of Education in Singapore offers programmes in teacher education specialising in physical education (PE) and the Sport Science & Management (SSM) undergraduate programme that provides academic and professional pathways to sports-related careers. PESS’ postgraduate (Master of Science and Doctor of Philosophy) programmes also provide PE teachers and sports practitioners opportunities to upgrade their professional knowledge. PESS prides itself on its international faculty with diverse and wide-ranging expertise. We are committed to educating our students to be independent, critical and creative thinkers and well-prepared practitioners in physical education, sports science, sports studies, sports management, and sports pedagogy. We provide up-to-date theoretical and practical knowledge and aim to inspire, lead, and motivate our future youth. Faculty members have access to state-of-the-art sports science laboratories and fully-equipped sports facilities.

We invite suitable applicants to apply for Assistant/ Associate Professor in sports injury rehabilitation, and musculoskeletal health. Applicants whose secondary area of expertise is sports biomechanics or exercise physiology will have an added advantage.

Requirements

Successful candidates must have:

• A PhD in the area of sports injuries prevention, rehabilitation, or related areas

• A proven track record of research and publications in related areas, including the ability to secure and manage competitive grants and an emerging record of publications in reputable peer-reviewed international journals

• An excellent track record in university teaching and research in the related fields, preferably at an institution of good standing and a promising trajectory in research and publications

• Evidence of a good record in teaching courses in the related fields

• Experience in supervising graduate students

• Leadership in research management (e.g., research grants received) and experience in curriculum development

In addition, an Associate Professor (tenure-track) will be expected to:

• Lead critical areas of research in sports injuries and related fields within the department

• Mentor young faculty members in the department

• Lead in the provision of professional services to schools, the Ministry of Education, and other public organisations as and when required

Responsibilities

Successful candidates will be expected to:

• Teach academic and sports activity courses

• Be involved in student supervision, associated research, graduate student supervision, and some administrative work.

Application

Please submit your application together with the following to us through: https://ntu.wd3.myworkdayjobs.com/Careers/job/NTU-Main-Campus-Singapore/Assistant-Associate-Professor-in-Sports-Injury-Rehabilitation--PESS---NIE-_R00019155

• Cover letter indicating ways you meet the criteria for the post

• A detailed curriculum vitae (including areas of research interest, list of publications, records of competitive grants and graduate supervision, competence and experience in teaching academic and/or sport activity courses)

• Teaching statement

• Teaching evaluation (if applicable)

• Research statement

• Names and contact details of at least three (3) academic referees

We strongly recommend that you complete the following documents found on NIE website as part of your application.

Closing Date

The closing date for applications is 31 January 2025 or until the position is filled.

Other Information

More information on PESS can be found at https://www.ntu.edu.sg/nie/about-us/academic-departments/physical-education-and-sports-science

Preliminary communication can be directed to Associate Professor Kee Ying Hwa Adrian, Head of PESS, at [email protected]

Note to applicants

Only successful candidates will be notified (via email).

Summary:

• Up to: $2,500
• Work Day & Hours: 5 Days per week (Mon-Fri 8.30pm - 6pm)
• Nearest MRT station: Joo Koon / Pioneer MRT

Responsibilities:

• Coordinate sales team by managing schedules, filing important documents and communicating relevant information.
• Ensure the adequacy of sales-related equipment or material.
• Respond to complaints from customers and give after-sales support when requested.
• Store and sort financial and non-financial data in electronic form and present reports.
• Handle the processing of all orders with accuracy and timeliness.
• Inform clients of unforeseen delays or problems.
• Monitor the team’s progress, identify shortcomings and propose improvements.
• Ensure adherence to company policies.

Requirements:

• Singaporean Only
• Proven experience in sales; experience as a sales coordinator or in other administrative positions will be considered a plus.
• Knowledge in general hardware products (bolts, nuts, washer & etc) will be added advantage.
• Good computer skills (MS Office).
• Well-organized and responsible with an aptitude in problem-solving.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted

Choo Tchi Seng
Registration Number: R1544906EA
Licence No: 06C2859 (MCI Career Services Pte Ltd)

Duties and Responsibilities

1. Analyses, plan, coordinate, determine and arrange material and products manufacturing tasks and schedules according to customer orders

o Propose purchasing strategies and identify buying trends to minimize cost

o Create and maintain an inventory schedule of Key materials (local and overseas)

2. Organize and schedule deliveries with production and logistic, keep production flowing smoothly with the needed materials

3. Search available products to find the best combination of quality, price, and delivery.

4. Monitor supplier’s performance including defective goods

• Corrective improvement monitoring
• On time delivery vs late delivery

5. Work with QA dept on supplier audits

6. Shortlist new potential supplier with recommendation comparison

7. Handling customer complaints involving material purchase from supplier

8. Maintaining all relevant ISO and FSC documents with accuracy.

9. Ensure all materials purchased are compliant to company standards.

10. Keep detailed records and prepare and submit necessary reports.

11. Maintain daily day to day purchase operations

12. Mentor to junior / new purchaser

Responsibilities:

• Inspect and troubleshoot equipment and machine.
• Perform preventive maintenance to achieve minimal to zero machine downtime.
• Source replacement parts.
• Repair and replace faulty parts & equipment.
• Carry out minor fabrication
• Carry out building maintenance and service
• Comply to all risk control measures and adhere to safe work procedure according to WSH (Risk Management) requirements while performing assigned work duties.

Requirements:

• Rich experience as a technician especially on machine maintenance and repair
• Electrical, electronic and mechanical knowledge
• Detailed with problem-solving skills

Responsibilities:

• Work closely with Project Manager/Engineer to prepare and tracking the project documentations, transmittal and submissions to clients.

• Strong knowledge in Instrumentation and Electrical engineering background.

Requirements:

• Degree/diploma in Engineering or equivalent qualifications.

• Minimum 2 years of relevant experience as project Engineer / management in oil & gas industry.

• Attention to detail and accuracy.

• Capability to multi-task, good communication and interpersonal skills.

• Able to use Autocad, read and interpret technical drawing would be advantage.

Job Responsibilities

• Take full responsibility for conducting all necessary field surveys, from initial site reconnaissance and boundary identification to final as-built documentation.

• Establish and maintain control points and site benchmarks, ensuring their integrity throughout the construction process.

• Lead the execution of topographic and as-built surveys to capture essential data.

• Take charge of site layout by performing accurate setting out and marking of all structural and infrastructural elements such as roads, buildings, utilities, and earthworks.

• Leadership role in managing and guiding the surveying team, including junior surveyors and chainmen.

• Act as the primary liaison between the survey team and project engineers, contractors, and stakeholders.

• Oversee the collection, processing, and interpretation of survey data using tools like total stations (Sokkia, Leica), and AutoCAD. Prepare and present comprehensive survey reports that inform key project decisions.

• Take ownership of identifying and resolving on-site issues, such as site discrepancies, inaccuracies in setting out, or conflicts between design plans and site conditions.

• Implement strict quality control protocols to ensure the accuracy, reliability, and legal compliance of all surveying tasks.

Job Requirements

• Proficient in using common total stations (Sokkia, Leica)

• Min 1 year experience in land surveying. At least 3 year(s) of working experience in the related field is required for this position.

• Experience with computer-aided design tools, such as AutoCAD Civil 3D software

• Proficient in Math and cartography skills

• Written and verbal communication skills

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Engineering (Civil) or equivalent

Sell goods to businesses, government agencies, and other organizations. Contact customers, explain the features of the products you are selling, negotiate prices, and answer any questions that your customers may have about the products.

Duties

· Identify prospective customers by using business directories, following leads from existing clients, and attending trade shows and conferences

· Contact new and existing customers to discuss their needs and explain how specific products and services can meet these needs

· Help customers select products to meet customers’ needs, product specifications, and regulations

· Emphasize product features that will meet customers’ needs, and exhibit the capabilities and limitations of their products

· Answer customers’ questions about the prices, availability, and uses of the products they are selling

· Negotiate prices and terms of sales and service agreements

· Prepare sales contracts and submit orders for processing

· Collaborate with colleagues to exchange information, such as information on selling strategies and marketing information

· Follow up with customers to make sure that they are satisfied with their purchases and to answer any questions or concerns they might have

The Test Engineer will be based in Changi South reporting to NPI Manager.

Responsible for implementing and maintaining cost-effective methods of testing and troubleshooting systems, software, and/or equipment for state-of-the-art semiconductor component manufacturing equipment's.

Job Responsibilities

• Directs and/or coordinate test process flow for system Integration and modular testing of high precisions electromechanical assemblies.
• Directs and/or coordinate test solutions for system Integration and modular testing in collaboration with OEM to meet the product functional performance to achieve zero defects in field.
• Directs and/or coordinates electronic and electromechanical engineering and/or technical personnel in fabrication and design of testing and test control apparatus and equipment, or software and systems testing.
• Directs and coordinates electronic engineering activities concerned with development, procurement, installation and calibration of instruments, equipment and control devices required to test, and record test data.
• Interfaces and confers with engineering and technical personnel to resolve testing problems such as product or system malfunctions, incomplete test data, data interpretation or coding issues.
• Evaluates and interprets test data and prepares technical reports for monitoring and management purposes.
• Resolve test yield problems by performing evaluation of root causes, developing, and coordinating corrective action measures and monitoring improvements.
• Trains and instructs floor support, test technicians and test operators on test hardware and/or software, as well as problem solving techniques.
• Perform and support equipment verification and integration in production.
• May develop or use computer software and hardware to conduct tests on electronic products and systems or software.
• Create and maintain process documentation.
• Actively search for innovative technologies or procedures in the test sector.
• Defines conditions under which tests are to be conducted and sequences and phases of test operations.

Job Requirements

• Bachelor's degree in electrical and electronics or Mechatronics field or equivalent experience and training which requires at least 4 years of experience in test engineering in the high technology electronics industry or related area.
• Modular/ System Integration Testing: Product functional testing and troubleshooting various test solution at various level component, modular and final system
• Experience in functional software, measuring equipment’s (Oscilloscope, logic analyzer, sensors, measuring gauges etc.) and tools that are integrated to perform the functional test to cover the product functionality
• Experience on modify or updating existing software solutions to support product design changes or test enhancements
• Experience in creating and maintaining stand operating procedures to enable easy of manufacturing and meeting all audit compliance.
• Inspection: PCBA board, systems, components, cable and harness, microscope, measuring tools.
• Handling Mechanical & Electrical Tools: taps and dies, alignment tools, measuring tools.
• Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
• Ability to write reports, business correspondence and procedure manuals.
• Ability to effectively communicate with managers and employees of the organizations.
• Impacts the near-term (quarterly/semi-annual)operational success of the function. Enhances and provides input to functional processes or technologies. Assists in achieving section/sub-function objectives for a functional area. Demonstrates capability in leading a major initiative that may impact multiple sites/customers.

Role responsibilities:

-Confidence to host live sessions or interactive events to answer questions and showcase the service

-Confidence to host live sessions or interactive events to answer questions and showcase the service

-Able to interaction with livestream audience to promote clients product, and share useful information to expand reach and engagement.

-Work closely with director and to support director with her livestream

-Confidence to share relatable and inspiring content that encourages interaction and builds trust during livestream

-Assist director on matchmaking services

-Promote upcoming livestreams through social media, email marketing, and platform notifications.

-Confidence to organize virtual or in-person matchmaking events such as speed-dating sessions, networking mixers, or relationship workshops.

Requirement:

- 3 full working days are required for this role (Part-time)

- 6 months contact (renewable)

- preferably bilingual: English & Chinese (reading, writing and speaking)

- Local diploma / A level grads

Mandatory Skills

Requirement:

1. Understanding of protocols like HTTP/HTTPS/FTP/SFTP/AS2 etc
2. Programing experience in Java
3. Familiarity with Linux operating system and commands
4. Capability to troubleshoot integration issues efficiently

Senior Cook Job description

The Senior cook will prepare meals and follow establishment recipes. Duties include preparing ingredients, adhering to the restaurant menu, and following food health and safety procedures. Cook, clean, assist other cooks and staff and deliver food in a fast-paced environment. Work may include operating a grill, oven, or fryer. Previous experience in a team environment and various cooking methods preferred.

That cook need to play as multitasking role he must be ready to washing vessels and cleaning kitchen environment

Duties and Responsibilities

• Setting up, cleaning, and organizing work stations

• Preparing ingredients for the shift; washing vegetables, chopping, seasoning meat, etc.

• Preparing deep fryer, utensils, and grill for shift

• Roti prate flour mixing

• Ready to cook Goring items (nasi,ikanpils,mee,kwithya,noodles)

• preparation of south indian & north indian curies

• Taking orders from wait staff or computerized system

• Cooking order according to food health and safety standards

• Recommending ideas for specials or seasonal dishes

• Handling multiple food orders at one time

• Monitoring multiple food orders as new orders arrive

• Dressing order for presentation

• Ensuring each guest order has the correct food and sides

• Delivering food order to wait staff in a timely manner

• Storing all food properly

• Sanitizing and cleaning work stations and utensils

• Reordering stock and food supplies

• Monitoring other cooks and team members

• Assisting other cooks in preparing food or helping other team members when needed

Requirements and Qualifications

• Ready to work any shift

• Able to work in a fast-paced environment

• Able to multitask, prioritize, and manage time efficiently

• Physical endurance to stand for an entire shift

• Self-motivated and self-directed

• Works well as part of a team and on individual tasks

• Able to quickly memorize complex or multiple orders

• High school degree or equivalent

• Previous experience as a cook, or relevant work experience

• Legally able to work in establishments which serve alcohol

• Able to work early mornings, nights, and weekends

• Must pass a background check

• Able to read and write

Job Description
To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.

• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring, and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials, and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements.
• Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Job Requirement

• Degree in with degree in Civil, mechanical or equivalent
• At least 1 - 2 years relevant experience in construction site
• Prior experience in Refinery / Process Plant on Civil and/or Mechanical projects execution will be advantageous

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Job Responsibilities:

• Pre-Commissioning of Electrical Panels / equipment / Network / PAGA / Radio / CCTV / Telecommunications Systems
• Commission / Test the performance of Electrical Systems and Subsystems
• Commission / Test the performance of Mechanical / Process Systems and Subsystems
• Issue Subsystem and Performance Reports
• Supervise the Electrical / Mechanical / Telecom Team
• Participate in meetings with clients

Requirements:

• Min. 3 years years of commissioning experience in the Oil & Gas/ Wind Farm industry
• Experience in commissioning of Electrical Panels / equipment / Network / PAGA / Radio / CCTV / Telecommunications Systems
• Good knowledge and experience in commissioning activities of oil and gas/ wind farm facilities
• Good analytical, problem solving and planning skills.
• Familiar with MS Office software applications (MS Outlook, Word, Excel, Power Point etc.

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Working hours

Monday – Thursday: 8:00am – 5.15pm

Friday: 8:00am – 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Assist Senior Contracts Manager in tender/contract review and finalizing the tender sum.
• Help with contract administration, progress claims, and liaise with the Client's representative on claims and variation costs.
• Compile subcontractor quotes for review and approval.
• Keep Contract Manager updated on all contractual and site matters.
• Review and verify subcontractor/supplier claims and prepare payment certificates for approval.
• Prepare final accounts and variation submissions.
• Maintain quality systems in the Contracts Department.

Requirements:

• Minimum Diploma in Quantity Surveying or equivalents.
• At least 5 years of working experience related field.
• Preferably experienced in pipe jacking works and tunnelling projects.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628