JOB DESCRIPTION

· Discussion with system engineers on SoC architecture and feedback on optimization.

· Work on SoC integration; system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;

· Discussion with synthesis engineer and back-end engineer on design optimization.

· SoC DFT support;

· SoC verification plan and SoC verification support

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Knowledge of ASIC design flow

· Experience in RTL coding, RTL and gate-level debug

· Understanding of DFT, timing and power requirements

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Knowledge on mixed-signal design would be an advantage.

JOB DESCRIPTION

· Discussion with system engineers on IP requirement and micro architecture.

· Develop IP (control path intensive or data path intensive) meet functional requirement and protocol standard.

· Support SoC designer on integration, timing constraints and power domain setting.

· Support IP verification for verification plan review, test case debugging.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Experience in IP development (either control path intensive or data path intensive)

· Knowledge of timing, DFT and power structure.

· Familiar with UNIX/ Linux environment and scripting

· Experience on communication IP and/or video IP development would be advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Experience on communication IP development would be an advantage

· Experience on video IP development would be an advantage

Job Description:

• Perform the full spectrum of HR duties
• Ensure company HR policies are in compliance with the local labour regulations
• Plan and participate in recruitment events and corporate events
• Execute the learning programs.
• Arrange business travel such as air-ticket booking, hotel, local transport etc
• Prepare weekly and monthly report of office operation/recruitment activities.
• Any other duties as assigned

Job Requirements:

• Minimum Diploma/ Degree in Human Resource Management or Business Administration
• Good knowledge of MOM law regulations, Employment Act and employment practices in Singapore
• Proficient in MS Office
• Good working attitude, honest, integrity
• Bilingual in English and Mandarin is required to liaise with Chinese associates
• For Singaporeans and SPR only

Roles & Responsibilities:

- Oversee daily transactions, including accounts payable/receivable, general ledger and bank reconciliations

- Prepare budgeting reports and forecast revenues

- Manage month-end and year-end closing

- Monitor the daily performance of the accounting department

- Organize financial data into useable information and maintain updated records

- Track the progress of financial and accounting objectives

- Establish accounting policies and procedures, aligned with company’s targets

- Ensure compliance with the law

Job Requirements:

- Bachelor's degree in Accounting or Business Administration required.

- Five years or more of related experience required.

- Proficient in Microsoft Office applications, with advanced Word, Excel, PowerPoint

- Has a good command of English, with both written and oral communication skills

- Ability to multitask and prioritize daily workload

- Takes accountability of work and good attitude over teamwork

- 5.5 days work per week; Mon-Fri: 9am-6pm; Sat: 9am-1pm

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional, and related sectors.

With offices across Europe, Asia, and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for Recruitment/Sales Intern- Engineering Services-Pharma to join us on an Internship to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Build your network by engaging with candidates as a talent acqusition/recrtuiter
• Build and strengthen your network of candidates via cold calling, and face to face meetings
• Continually seek opportunities to increase customer satisfaction, driving continuous improvement initiatives.
• Build a network of clients to sell out outsourced technical solutions.
• Must be in the last semester of your studies as a full time job could be available for the right talent.

If you'd like to find out about this opportunity, please forward your CV to Nelson Anthony ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal-opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing on employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Responsibilities:

• Report to Project Director on project management, site management, and risk control to achieve project goals.
• Handle construction planning, scheduling, baseline programs, and coordinate with consultants, contractors, and suppliers.
• Monitor project schedules and report progress according to the baseline program.
• Assist PD in preparing project reports (e.g., monthly reports, VO management, EOT assessments).
• Liaise with clients, authorities, consultants, subcontractors, and suppliers on project matters, providing technical and non-technical solutions.
• Conduct technical reviews to ensure contractual compliance and timely completion.
• Support the Contracts Department with tenders, including drawings, method statements, proposals, and claims preparation.
• Attend meetings with clients, consultants, and contractors to ensure progress remains on schedule.
• Oversee quality control, safety, and EHS practices on-site, identifying high-risk activities and approving method statements.
• Undertake additional duties as assigned by management.

Requirements:

• Diploma and above in Civil Engineering or equivalents.
• Minimum of 5 years of relevant working experience.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Execute service and maintenance workflows efficiently.
• Coordinate with client representatives on all service/maintenance matters.
• Assist the supervisor in organizing teams for service tasks and delegating responsibilities.
• Manage daily client interactions, ensuring their expectations are met.
• Support the supervisor in troubleshooting and timely completion of security system services.
• Understand each client's business to ensure high customer satisfaction.
• Ensure all work complies with Workplace Safety and Health Act regulations.

Requirements:

• Minimum Nitec in Electrical/Electronic Engineering.
• At least 2 years of working experience in related field.
• Requires knowledge and practical experience with security systems (e.g., Integrated Security Management, Card Access Control, Intrusion Detection, and CCTV systems).
• IT/Network/Server knowledge is a plus.
• Transport allowance provided.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• To assign work tasks to various personnels within the Operation Department.
• To handle complaints and feedback.
• Communicate and coordinate on customers orders and various requirements.
• Ensuring smooth delivery of cargoes to customers/site within schedule.
• Required to handle import/export permits and various documents as required by the customer.
• Application of required customs and LTA permits etc…
• Other admin and billing functions.

Requirements

• Min GCE 'N' or 'O' Levels
• Min 1 year similar work experience
• Entry Level candidates are welcome to apply, must be willing to learn
• PC literate
• Well organize & able to multi-task
• Willing to work in West Area (Company transport from Joo Koon/Choa Chu Kang MRT)
• All are welcome to apply

Responsibilities:

• To assign various work tasks to drivers for delivery of customer's trailers.
• To handle all complaints, feedback and problems.
• Handling vehicle repair schedule with workshop.
• Application of required customs and permits etc… if necessary.
• Other admin and billing functions.

Requirements

• Able to work in challenging environment
• Willing to work at night
• Min 1 year experience in manufacturing or transport industry
• Entry Level candidates are welcome to apply, must be willing to learn
• PC literate
• Well organize & able to multi-task
• Willing to work in West Area (Company transport from Joo Koon/Choa Chu Kang MRT)
• All are welcome to apply

Responsibilities

• Handle operational HR matters.
• Work with the line managers on their recruitment needs and ensure that the recruitment is in accordance with the manpower plan
• Required to update and accurate maintenance of digital and electronic internal employee records.
• Supporting work pass application processes for foreign workers with liaising with government parties.
• Deliver HR services in an effective and efficient manner; identify and resolve HR issues if required.
• Provide support in the implementation of HR strategy and execution of any supporting programs.
• Supporting new hire onboarding and exiting process for internal employees.
• Ability to perform payroll tasks related to the input and reconciliation of timekeeping data, new hires, terminations, salary changes, compensation, and benefits payouts, in accordance with established operating procedures and deadlines.
• Conducting performance and wage reviews.

Requirements :

• Min Diploma/ Degree in Human Resource Management, Business Administration or equivalent.
• Min 2 years of experience in office management and HR Operations experience.
• Knowledge of HR processes, employment laws, and regulations is a bonus.
• Knowledge of Microsoft Office/365, including word, excel, power point and Outlook a must.
• Excellent oral & written communication skills

Responsible for the overall performance of the designated department / accounts, delivering consistent financial growth through sustainable business strategies and operational excellence in tandem with the growth strategy of the Company. As a top management representative of the Company, continuously build strategic client relationships (new and existing), drive a high performing and stable team and promote cross collaboration with other departments.

We are looking for a highly motivated Sales Associate (Indoor) to join our team. This is an exciting opportunity to work in a professional, office-based environment, where you will be responsible for building relationships with clients, identifying their needs, and providing tailored solutions. If you have a passion for customer service, excellent communication skills, and enjoy contributing to a collaborative team, this role is for you!

Key Responsibilities:

• Engage with clients over phone, email, or online platforms, offering product recommendations.
• Manage incoming inquiries and provide timely, accurate information to our customers.
• Track sales and follow up with customers to ensure a seamless experience.
• Maintain up-to-date product knowledge and industry trends to assist clients effectively.
• Assist with administrative tasks, such as preparing invoices to be sent out regularly, administrative work like filing sales orders with respective documents.
• Print work orders, prepare delivery notes, and issue certificates as required to ensure smooth order fulfilment.
• Communicating with the warehouse when it comes to preparing goods for customers.

Qualifications:

• Strong communication and interpersonal skills.
• Ability to work independently and as part of a team in a fast-paced environment.
• Proficient in using ERP software, Microsoft Office.
• Attention to detail for keying in orders, generating work orders, and preparing delivery notes.
• Detail-oriented with a strong focus on delivering exceptional service.
• A positive, can-do attitude and a passion for achieving results.
• Fluency in Mandarin is required to communicate effectively with Mandarin-speaking clients.

Work location:

33 Tuas Ave 2 Singapore 639463

Company provides transport pick up at Lakeside and Boon Lay MRT station

Working hours:

Monday to Friday 8:00am-5:15pm

Saturday 9:30am-12:30pm (1 day per month only)

We are seeking a reliable and efficient Delivery Driver to join our team. The Delivery Driver will be responsible for delivering packages and goods to customers in a timely and professional manner. The ideal candidate will have a valid class 4 driver's license, a clean driving record, and excellent customer service skills.

Responsibilities:

• Assist with loading and unloading goods
• Ensure goods are delivered in good condition without delays or damage
• Deliver packages and goods to customers in a timely and professional manner
• Follow delivery schedules and routes
• Report any delivery issues or concerns to the supervisor

Requirements:

• Valid class 4 driver's license
• Minimum 5 years experience
• Good driving record
• Excellent customer service skills
• Ability to lift and carry heavy packages and goods
• Good communication and interpersonal skills

Education and Experience:

• GCE N or O Level or equivalent
• Previous experience as a delivery driver is preferred
• Familiarity with local roads and routes is an asset

Working Days and Timing:

5 Working Days + 1 Saturday per Month: Monday to Friday 8:45am to 5:30pm

Our client is one of the licensed warehouses, specialised in handling and storage of dutiable cargo like alcoholic beverages and tobacco is inviting qualified candidates to fill the position of Forklift Cum Warehouse Assistant and located in Tuas.

RESPONSIBILITIES:

• Receiving, storing, and organizing incoming stock.
• Picking and packing orders for shipment.
• Loading and unloading delivery vehicles.
• Keeping detailed records of inventory.
• Inspecting goods for defects or damages.
• Maintaining a clean and safe work environment.
• Assisting with inventory audits.
• Operating warehouse equipment such as forklifts and pallet jacks.
• Communicating effectively with other warehouse staff and supervisors.
• Following health and safety guidelines.

REQUIREMENTS:

• Must know how to use the forklift licence

Roles & Responsibilities

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

1. Carry out all preventive, predictive and corrective maintenance as directed by the Supervisor and clear completed work from the CMMS data base.
2. Responsible for the proper maintenance on various rotating and static equipment and systems including the plant piping systems and structural support systems.
3. Response and resolve work orders for any mal-functioning for static and rotating equipment in the facility. Ensure minimum down time or timely repairs of production equipment.
4. Determine materials, spares, tools and method required to complete maintenance task safely.
5. Plan and execute machinery condition monitoring and field data collection with production team and engineers.
6. Ensure all plant valves are fully operational and all mechanical components properly grease and lubricated where applicable, including carry out, strip, redress and rebuild of various types of control and plant valves.
7. Supervise and work closely with in-house contractor and equipment vendor to execute maintenance work at the terminal. Ensure safeguards are followed such as valid work permit are issued, wearing prescribed personal protection equipment etc.
8. Liaise with production team with all aspects of mechanical system testing, running, trouble-shooting, carry out material specification checks on all installed piping components such as gasket, bolts, etc.
9. Able to take on additional tasks or responsibilities as assigned by superiors.
10. Able to perform valve line up & LOTO for operations or maintenance preparations.
11. The incumbent shall be part of the Company's Emergency Response Team(CERT) and perform any assigned roles and responsibilities (ie fire fighter etc) for such purposes.

Work Experience

1. Minimum of 3-5 years practical experience in the oil and petrochemical refinery.
2. Experience in hands-on troubleshooting of mechanical/ machinery systems i.e compressor/pump and diesel/gas engine.
3. Familiar with Permit to Work system and local codes, regulations and standards requirement.
4. Proficient in usage of Microsoft Office and trained in the use of the Computerized Maintenance Management System (CMMS); ie SAP.
5. Ability to speak, write and communicate effectively in English.
6. Experience with LNG/Natural Gas or gas engine generator maintenance and operations will be an added advantage.
7. In addition, successful candidate should possess the following personal attributes:

• A team player who can work well in a team and with good listening skill
• High self-motivation with the ability to work with minimal supervision & adapt to changing priorities and assignments.
• Willing to take up new challenges and responsibilities
• Fast learner

Education Requirement

The candidate must possess a Professional Certificate/NiTEC, Diploma in Engineering (Mechanical/ Mechatronic/ Electromechanical) or equivalent.

Responsibilities:

- Produce CNC design solutions for customize specification. Preferably with good technical design and engineering background.
- Produce design for automation
- Make drawings (2D & 3D) in CATIA
- Make parts explosion / BOM list using ENOVIA
- Documentation for fabrication
- Evaluation for design solutions
- Support production for machine modification design
- Do engineering presentations

Requirements:

- Diploma/ Degree in Mechanical Engineering
- Minimum 3 years related work experience
- 2D & 3D CAD operations; strong in CATIA
- Proficient in Microsoft ( Excel / words / power point )
- Independent and is a sound decision maker

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to kenneth(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Kenneth Tan Guan Quan

EA Personnel Reg No: R1550240

Job Description

• Answer incoming calls from customers to take orders
• Answer inquiries and questions, handle complaints
• Provide information to customers and service providers
• Verify data and entry into the system

Requirements:

• Willing to work at the Western part of Singapore (Taman Jurong Area)
• Knowledge of Customer service principles
• Knowledge of Singapore roads
• Good data entry and typing skills
• Good communication skills

Key Roles and Responsibilities

• Assist the Site Project manager in monitoring and managing the day-to-day operation of the projects.
• To support Site Project Manager in managing day-to-day clients’ interactions and expectations for optimal results
• To support Site Project Manager to collaborate with peers, liaise with trade contractors, clients and consultants and ensure timely delivery of quality services.
• To prepare and submit method of statement, sketches, site record and other technical submissions in a timely manner.
• To prepare Inspection and Test Plan, user manuals, drawings and conduct inspection and check on works performed.
• Check the drawings discrepancies and conduct field verification, and submit technical clarification to the clients and consultants.
• Ensure updated drawings including shop drawings are used by the site team in a timely manner.
• Assist the Project Manager in the preparation of reports and presentation to management, clients and stakeholders.
• Ensure that works carried out are in compliance with the Workplace Safety and Health Act
• Perform any other tasks as and when required so as to meet project milestones

Requirements

• Min Diploma or Higher Nitec in Mechatronics/Electrical/Electronic Engineering or relevant with at least 3 years working experience
• Hands-on experience in security systems such as Integrated Security Management Systems, Card Access Control Systems, Intrusion Detection Systems and CCTV systems is a must
• Hands-on experience in security system configuration, System Networking and integration with third-party systems will be an advantage
• Willing to take ownership and Pro-active in Problem solving
• Must be a team player and strong verbal and written communication skills
• Customer service and business orientated with good initiative and adaptability
• Required to perform standby duties whenever required
• Driving License – Preferably if candidate possesses its own vehicle
• Singapore Citizens are preferred
• Location is at Shan Road / Site Office
• 5.5 work days

Responsibilities:

• Key-in of all pre-alerts received. (Mawb, BL, Courier waybills and Care-off parties D.O) into Excel list and LMS Software.
• Print all shipment labels.
• Key-in of all received shipments (Update into Excel list and LMS Software).
• Filing all documents into vessel file accordingly.
• Checking / Planning / Prepare / Print of next-day deliveries to the vessel.
• Prepare packing lists for packing.
• Prepare landing permit for boarding officer use.
• Packing / Checking (with the assistance of warehouse staff)
• Ensure all packed shipments are labeled and take photos for proof.
• Updating location details into the Warehouse loading sheet.
• Ensure safe keeping/housekeeping after packing.
• Liaise with all Care-Off parties meeting at the barge terminal. (Loading Details) take out
• Handover next day deliveries files to operations by 1630hrs (daily)
• Assist Logistics Manager for all Outgoing shipments
• Prepare and dispatch courier services shipments.
• Updating Daily Portnet vessel schedule.
• Print GST Permits for submission to Accounts Dept.
• Shipping Advice for all export shipments
• D.O sorting / Handlin petty cash collection from C/O party
• Calling / Receiving Calls from Care-off parties (24hrs)

Requirements:

• Minimum N level / ITC cert
• Minimum 2 years of admin work experience in Logistics
• Certified Customs Declarant advantageous
• Good organization and communication skills
• Ability to write and converse well in English
• Good MS Excel skills
• Able to multi-task and able to work under stress in a fast-paced environment

Responsibilities:

• Ensures alignment with the Project Management team on Project contract administration needs, objectives and requirements.
• Ensures the project team understands and utilizes the contracts properly.
• Advises the Project Management Team, Procurement Manager and Subcontracts Manager of company on aspects of Project execution which deviates from contract requirements.
• Analyses the contract terms and identify areas of possible risks and opportunities related to the application of contract clauses
• Provide alternate mitigating contract articles and successfully negotiate with customers with compelling arguments.
• Writes contract letters and other communications and notices.
• Ensures in liaison with the other functions that the required insurance coverage is timely put in place and that required insurance certificates are provided/obtained from vendors and subcontractors.
• Contract administration during project execution, ensuring that all aspects of the contract during the bidding and execution phase are addressed with the objective of contributing to maximise project revenues.
• Manages the change order process from identification to resolution of change: prepare, interfacing with involved functions, and negotiate any claims against or from client and vendors/subcontractors.
• Transfers originals of contractual documents to proper function(s), in accordance with the applicable procedures.
• Ensures that contractual information used by the project team is accurate and up-to-date.
• Manages contract milestone activities, and close-out activities, ensure orderly turnover of Project.
• Checks that milestone completion notices and other documents required for payment meet contractual requirements.
• Liaison with Project Management Team and relevant stakeholders to prepare and timely submission of deliverables under the contract.
• Supports in negotiations of claims, variations, changes and disputes with contractors in collaboration with Project Management, Legal Department and others as required.
• Ensures communication of changes to contracts to all key stakeholders.
• Ensures Procurement/Subcontracting’s contract administration and procurement/subcontracting procedures and processes meet contract requirements.
• Ensures communications between Company and contractors are consistent with terms and conditions in agreements.
• Interfaces with the project team, internal departments and external vendors on matters such as cost, performance, progress assessment, payments, reporting, trends, and change orders.
• Liaises with project team, participate to meetings, examine drafts, revise and file all correspondence having a contractual relevance exchanged during project execution with clients, vendors, subcontractors and authorities.
• Attends meetings to assess progress on projects which are in motion, and take detailed notes to share with stakeholders
• Negotiates contract terms and conditions with each relevant stakeholders – customer, vendor/subcontractor, analyzing potential risks involved with certain contract agreements and helping Company and Project Management Team better understand the information outlined in the contracts.
• Evaluates supplier/subcontractor claims entitlement and variation order under the contract requirements.
• Supports negotiations of claims, manage contractual changes and resolve disputes or conflict resolution with Contractors.

Requirements:

• Bachelor’s degree in business management or related disciplines, Diploma holders with relevant experience are welcomed to apply.
• Minimum 10 years of experience in a contract management role, contract administration role, purchasing or contracting.
• Proficient in Microsoft Office (Word, Excel and PowerPoint).
• Exemplifies knowledge of contract law, accounting principles and finance.
• Possesses superior attention to detail in order to spot inconsistencies in contracts.
• Ability in negotiating terms and drafting contracts.
• Has strong negotiation and mediation skills.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Able to work productively independently and as part of a team
• Must have excellent analytical thinking skills and problem solving abilities
• Previous experience as a project manager, or coordinating large projects is an asset.
• The candidate must also possess strong computer skills and have the ability to work within tight deadlines and handle multiple priorities at one time.
• Experience working in Offshore, Engineering or Construction areas.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Yard

51 Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Purpose

· Assist with daily duties to make sure provide good relationship and services to client.

Duties and Responsibilities

· Responsible for the sales and account management of new business opportunity, leveraging on company’s logistics offerings and services.

· Identify business prospects and opportunities, evaluating and analysing the sales options, and proposing effective solutions for the clients.

· Maintain relationships with clients by providing support, information and guidance.

· Preparation and submission of the Project Tenders/RFQs.

· Monthly sales reporting.

· Any other ad-hoc assignment assigned by superior from time to time.

Qualifications and Requirements

· Min Diploma or degree holders in any logistics / engineering discipline

· PC knowledge in Word/Excel/PowerPoint / Outlook

· Self-drive, highly motivated, proactive, confident and independent.

· Excellent communication, interpersonal and customer-handling skills.

Working Hours

· 8.30 am to 5.30 pm (Monday to Friday); 8.30 am to 12.30 pm (alternate Saturday)

• Responsible for supervision of fabrication and installation of piping items as per drawings and Clients specifications
• Responsible for planned progress schedule without compromising quality and safety
• Co-ordinates with QC, Painting Supervisors and Client representative for Hydro-test and completion.
• Responsible for safety related to work place & Worker / Contractor under you
• Attend daily Tool Box meeting at site.
• Carry out daily reporting and monitoring at site progress in order to achieve planned schedule.
• Ensure site housekeeping are well maintained and strictly follow proper work sequence and work flow.
• Prepare necessary documents such as JCS, SI as and when required for all additional work requirements.
• Responsible for Material Take Off (MTO) and follow up

Job Description:

• Handle more than 500 worker's payroll
• Handle full spectrum of accounting duties.
• Prepare budget forecasts.
• Publish financial statements on time.
• Reconcile accounts payable and receivables
• Ensure timely bank payments.
• Compute taxes and prepare tax returns.
• Manage balance sheets and profit/loss statements.
• Report on the company’s financial health and liquidity.
• Audit financial transactions and documents.
• Reinforce financial data confidentiality and conduct database backups when necessary.
• Comply with financial policies and regulations

Job Requirements and Qualifications:

• 3-5 years work experience as an Accountant.
• Bachelor's or Master's Degree preferred.
• Excellent knowledge of accounting regulations and procedures.
• Strong attention to detail and good analytical skills
• May need to work on weekends and odd hours during salary weeks if needed.

Job Description:

• Prepare and operate CNC machine tools to perform drilling, milling and other tasks.
• Able to understand the specifications and expected results of the task at hand by reading design drawings, mechanical drawings, etc.
• Translate instructions into computational commands so that the machine can perform the correct function.
• To supervise and monitor when the machine is performing task and able to make necessary adjustments to produce better results.
• Have experience in operatingt a milling machine.

Skills:

• Know Mastercam CNC machining programming software system/G-code.
• Able to read and understand mechanical documents and drawings, such as 2D/3D.
• Must have a basic understanding of computer programming.

Requirements:

• Qualification: ITE/NITEC
• Minimum 2 years of relevant experience
• Bilingual in English and Chinese