• Daily preparation and production of bread/pastries
• Responsible for the standards of food consistency and quality
• Able to mix and and bake ingredient accordance to the receiptes and to produce the desired bread/pastries
• To minimize wastage of ingredient and stock
• Ability to create new recipe and food tasting session

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum 10 years QA/QC experiences

· LTA Mrt experiences will be an advantages

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Responsibilities:

Project-based Architectural Design Consultancy Services:

• Conceptualize concept and schematic designs.
• Carry out feasibility studies and presents design proposals.
• Design development that would include detailed drawings and specifications for contractors to follow for construction purposes.
• Assist in tendering and bidding processes and inspect the on-going construction to ensure that the project is built according to design plans.
• Liaise with and discuss project-relevant issues with clients.
• Negotiate with contractors on design requirements and building progress.
• Oversee progress of on-site work; ensure project is built according to design plans and resolve any issues that may arise.
• Work with engineers and surveyors to make sure that the building plans meet the necessary building standards.
• Project and/or design management of more than 3 - 4 projects at any given time.

Research-related Work:

• Assist in carrying out practice-based research into specific issues and challenges surrounding the built environment, with the aim of gaining greater insight into these issues and developing design strategies and solutions in response to them.
• Work with Director (Design and Research) to enhance public/industry awareness of the firm’s design philosophies, capabilities, and accomplishments (directly and indirectly) through design, writing, teaching, and research work.

Requirements:

• Minimum Bachelor Degree in Architecture or equivalent
• At least 5 years of working experience in the related field
• Able to work well with a team and take the lead at the working level
• Able to guide younger staff in design matters
• Possess good design and graphic communication skills, especially in the concept design, schematic design and design development stages.
• Positive attitude
• Some experience with tender documentation and construction stages
• Software skills: Rhino, Grasshopper, Adobe Photoshop, Illustrator and Indesign. Revit and computational skills will be a plus.
• Willing to take on new challenges

Responsibilities:

• Lead a project team and provide technical leadership on architectural design matters.
• Provide guidance to team members to ensure that design solutions are optimised in order to meet clients' requirements.
• Be involved in business development meetings to target specific markets, clients and project opportunities.
• Carry out architectural designs.
• Carry out feasibility studies and make design proposal presentations.
• Liaise with and discuss project-relevant issues with clients.
• Negotiate with contractors on design requirements and building progress.
• Oversee progress of on-site work; ensure project is built according to design plans and resolve any issues that may arise.
• Work with engineers and surveyors to make sure that the project meets the necessary standards.
• Project and/or design management of more than 3 - 4 projects at any given time.
• Take on the role of PD (Project Director) or PL (Project Lead) and be in charge of or assist in project P&L and resource planning.

Requirements:

• Minimum Bachelor's Degree in Architecture or equivalent
• At least 4-6 years of working experience in the related field
• Proficient in BIM (Revit), Sketchup, Adobe Photoshop
• Proficient in Microsoft Office applications
• Possess good interpersonal skills and a team player
• A hands-on person who is positive, proactive and driven
• Meticulous and able to organise work effectively

Key responsibilities and qualifications as follows:

1. Engage in all architecture phases, from concept design through to completion, including contract administrator.
2. Work with other disciplines to produce fully coordinated project information, including BIM models, drawings, schedules, and specifications.
3. Deliver compelling and high-quality designs that reflect creative and innovative thinking, elevating the overall project vision.
4. Oversee large-scale projects, leveraging a minimum of 6 years of relevant experience. International project experience is a significant advantage.
5. Collaborate effectively, work independently as needed and flexes to support the delivery of ad hoc requirements.
6. Communicate effectively with internal and external stakeholders.
7. Manage third-party contributions and ensure integration with the overall design process.
8. Use Adobe Suite, Rhino, Enscape, Revit proficiently.
9. Experience with Grasshopper or parametric design, hand sketching, and AI software is a plus.
10. Demonstrate strong graphic skills with Photoshop, Illustrator, and InDesign.
11. Supports team members in delivering high-quality work on time and provides mentoring to junior colleagues to foster their growth and development.

Requirements:

• Master's degree in architecture or equivalent
• At least 5 years of working experience in the related field
• Proficient in BIM (Revit), Sketchup, Adobe Photoshop
• Proficient in Microsoft Office applications
• Possess good interpersonal skills and a team player
• A hands-on person who is positive, proactive and driven
• Meticulous and able to organize work effectively
• Fresh graduates are encouraged to apply

Job Benefits:

5 days work week: 12:00 pm–3:00 pm, 6:00 pm–10:30 pm

Off - Monday & Tuesday

Basic up to $3600 + Staff Meals Provided + AWS + VB + $150 Extra Meal Allowance

$4000 Sign on BONUS

Central/South Area

Job Description:

• Effectively manage the kitchen operations to ensure correct standards and procedures are followed in the daily food preparation.
• Consistently monitor food quality and quantity to ensure profit margins are maintained and operating budgets are adhered through effective control systems.
• Responsible for overseeing the cleanliness, hygiene and maintenance of the kitchen and ensure compliance with all applicable food safety and regulations (e.g. HACCP, NEA regulations).
• Lead and ensure staff are cross trained to support successful daily operations.
• Exhibit Japanese culinary talent and expertise by performing tasks while leading and coaching the staff and managing all food related production.
• Work closely with the Head Chef to determine menu selections and specials and develop new menus recipes as necessary.
• Assume duties and responsibilities in the absence of the Head Chef.

Job Requirement:

• Diploma in Culinary with minimum 5 years of experience in Western cuisine.
• Proven experience as Sous Chef.
• Able to perform high-quality work while unsupervised.
• Ability to work in a fast-paced work environment and deliver orders in a timely manner.
• Must have relevant work experience in Western/ Japanese Cuisines (Teppanyaki).

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*
We wish you all the best in your career search.

You are welcome to visit our website at www.rkgroup.sg

RK Recruitment Pte Ltd | EA License No.: 20C0280

Raymond Ng Jun Han | EA Personnel No.: R1657009

Are you up for the challenging next step in your career? Stolthaven’s corporate Asset Management department is looking for a Lead Corporate Development Engineer.

Stolthaven’s corporate Asset Management department is responsible for developing various new business opportunities in close cooperation with our commercial functions, various experts and local management. These range from greenfield and M&A opportunities in our core business to opportunities in new fields of business or innovation such as energy transition related. The role of business development engineer is a key role in this. As a business development Engineer, you will be supporting with everything technical around business development. These are typically large (class III) projects with capex above 0.5 mln. You will be expected to have an inquisitive mindset and willing to work on various engineering disciplines. This role is not so much focused on what you know, but more on your ability to learn!

In this dynamic role, your responsibilities range from developing conceptual designs, masterplans and other project related documentation during the early stages of a project to evaluating new technology and learning all about new products to be stored or new process at our terminals. Within the local and global Asset Management teams, you will share knowledge & experience on your expertise and act as a true partner for the various stakeholders. You should be business oriented and willing to learn the “bigger picture”, focusing on how technical problems can be solved to support business goals.

As part of the global Asset Management team, you will work in close cooperation with the network of technical specialists and procurement for developing project cost estimates to proposed facilities in consideration of environmental and customer requirements.

SHVN Stolthaven Terminals a division of Stolt[1]Nielsen Limited (SNL), is the specialist storage provider of bulk liquids: Chemicals, clean petroleum, gases, vegetable oils, biofuels and oleochemicals. Our mission is to be the most respected global storage provider, delivering safe, high-quality, sustainable storage and handling solutions for our customers around the world.

Key Responsibilities

1. Provides comprehensive technical and management support on all technical projects assigned by the Asset Management Director. Typically, business development conceptual engineering and innovation projects. This includes, but is not limited to:

• Prepare project details, scope engineering documents and cost estimate to prepare for initial (board) approvals for new projects
• Assist in Preparing Requests for Quotation and other procurement documents in close cooperation with Stolthaven’s procurement team

2. General multi-disciplinary engineering works, such as:

• Support the preparation of technical proposals for improvements of technical installations
• Proactively identifies technical risks in projects and seeks for mitigation
• Providing assistance in the formation of annual capital budget forecasts
• Ensure all systems within the facility are designed, installed, and maintained in accordance to local, state and federal regulations and standards

3. Support or promote innovations, new products and methods by:

• Meeting with vendors to acquire knowledge to technical advancement, cost control and alternate solutions to typical terminal design and maintenance requirements
• Attending continuing education seminars and conferences to acquire knowledge pertinent to technological advances and regulatory changes
• Interacts with other initiatives for example in Risk Based Inspection meetings contributing to standardized way of working over terminals and within team by working on corporate projects assisting the global Asset Management team

4. Enforces established plant safety and environmental policy and procedures as related to assigned projects and related tasks

Qualifications

1. Bachelor/Master degree in Mechanical Engineering, EI&A, Civil or related field

2. Familiarity with applicable standards and codes relating to bulk liquid storage facilities for the applicable terminal location is preferred or should be obtained as part of training. This could include API, EEMUA, ANSI, NFPA, NEC, OSHA, and CFR and any other (local) codes

3. Exposure to Multi-disciplinary project teams with various business stakeholders is preferred

4. Self-motivated to ‘close the loop’ with actions and administrative responsibilities

5. Able to communicate with internal and external stakeholders in Portuguese and/or Chinese languages

6. Able to build and maintain both internal and external relations on various levels

7. Able to communicate effectively both verbally and in writing. Especially ability to explain complex technical topics to non-technical stakeholders

8. Proven safety leadership and service mindedness

9. Competences: self-motivated, flexible, stress resistant, result driven, team player, humour

10. Requires advanced conceptual thinking in complex and/or completely new situations and analytical skills

11. Must be computer literate with specific skills in MS Office

12. Knowledge of and experience with planning software (e.g. MS Projects, Oracle Primavera etc.) and Autodesk products (e.g. Autocad) is considered an advantage

13. Occasionally the ability and willingness to work weekends and/or holidays to accomplish critical project assignments

14. Depending on the required engineering discipline, willing to gain knowledge of the following:

• Mechanical: Standards and codes relating to bulk liquid storage facilities applicable to the location, such as API, ANSI, NFPA, NEC, OSHA, CFR, PGS
• EI&A: Standards and codes relating to bulk liquid storage facilities applicable to the location, such as ATEX, IEC, IEC61511, SIL applications, field instrumentation

15. Knowledge and experience with reviewing drawings just as P&ID, E&I drawing and Automation specifications. Knowledge and experience with ACAD and or E-plan drawings

16. Willing to working in Jurong Island (Company transport is provided at designated pickup point)

What we offer

Join us and become part of a family-founded organization where your contribution counts.

• A full-time and permanent role
• Working Hours: 5 days’ work week (Mon-Fri), 8.30am to 5.30pm
• A competitive compensation package, including a 13th month
• Good Flexible Medical Benefits for you and your family members
• Company Transport is provided as designated pick-up point

How to apply

• Complete the online application form and send it to us along with your CV
• Short-listed candidate, will be invited to attend interview at our terminal

Got questions about the process? Contact [email protected].

About Stolt-Nielsen

Stolt-Nielsen Limited is a long-term investor and manager of businesses, focused on opportunities in logistics, distribution, and aquaculture. The Stolt[1]Nielsen portfolio consists of its (three) global bulk-liquid and chemicals logistics businesses – Stolt Tankers, Stolthaven Terminals and Stolt Tank Containers – Stolt Sea Farm and investments in LNG. Stolt-Nielsen Limited is listed on the Oslo Stock Exchange (Oslo Børs: SNI).

Disclaimer for recruitment agencies

We don’t accept any unsolicited applications or CVs from recruitment and selection agencies.

Job Description & Requirements

1. Liaise with the Sales Dept , Finance Dept , Warehouse and Shipping Executive on purchase , L/C opening , arrival of consignment etc

2. Check on order status and stock and catalogue availability through computer for order raised by the sales personnel

3. Check and verify the Sales Contract from supplier’s against P.O.

4. Check and verify the D.O. and Invoice received against P.O. and Goods Receipt Note

5. Update order control register and GRN into computer when the goods are received

6. Maintain new items, location changes , inventory adjustment into computer

7. Raise claim forms for short supply or damage goods to suppliers and follow up on the matters , whenever necessary

8. Follow up on outstanding orders and delivery schedules of orders

9. Prepare and type documents , A&P support etc. required within the Dept

10. Handle daily correspondence independently pertaining to the administration of the purchasing function

11. Attend to customer’s inquiries in the office

12. Ensure proper documentation procedures are adhered to by the Dept and recommend improvement , if any

13. Monitor and maintain proper filing system for easy retrieval of information

14. Collect all Tender Notice related to Power & Services products and inform Manager and /or person-in-charge

15. To follow up on the correspondence with the principal and customer

16. To prepare and assist in delivery order , invoice and confirmation of order upon receiving sales order

17. Prepare reports for Dept reporting and decision making purpose

18. Provide administrative support to the Dept

Requirement:

• Min GCE “O” Level or equivalent
• Min 2 years’ experience in similar capacity

· Good computer skills especially in MS Office Software

· Experience with SAP is highly preferred

· Possess good interpersonal & communication skills

· Meticulous and attentive to details

Are you a creative talent passionate about design, storytelling, and green living? Join World Farm, Singapore’s leading wholesale and retail garden centre, as we embark on an exciting journey to inspire sustainability and transform homes with the beauty of plants.

As our Marketing Designer and Content Creator, you’ll combine your creativity and expertise to craft compelling visuals and engaging content that resonates with budding gardeners, proud homeowners, and plant enthusiasts alike.

About World Farm

At World Farm, we are more than a garden centre. We are a one-stop destination for all things plants and gardening, committed to promoting sustainability and green living—one plant at a time. As we expand further into the retail space, we aim to make gardening accessible and exciting for everyone, from beginners to seasoned plant parents.

Your Responsibilities:

• Creative Design: Craft visually stunning designs for digital and print, including posters, banners, flyers, brochures, vouchers, gift cards, and POS displays.
• Content Creation: Develop engaging multimedia content, including photos, videos, animations, and social media posts tailored to platforms like Instagram, TikTok, and Xiao Hong Shu.
• Brand Storytelling: Collaborate with the team to conceptualise and execute campaigns that connect with our target audience.
• Photography & Videography: Capture product photos, videos, and lifestyle content that showcases the beauty of plants and garden spaces.
• Trendspotting: Stay updated on social media and marketing trends to ensure we’re always ahead of the curve.
• Campaign Coordination: Work closely with the team to align visuals with overarching marketing objectives.
• Asset Management: Organise and maintain a library of design assets for efficient and effective project execution.

What We’re Looking For:Marketing Designer and Content Creator

• Qualifications: Diploma or Degree in Graphic Design, Visual Arts, or related fields (or equivalent experience).
• Experience: At least 2 years of relevant experience in graphic design, content creation, or digital marketing.
• Technical Skills:

1. Proficiency in Adobe Creative Suite (Photoshop, Illustrator, InDesign).
2. Proficiency in videography and photography skills.
3. Video editing skills (Premiere Pro, After Effects, or CapCut) are a bonus.

• Creative Edge: Strong eye for typography, layout, and aesthetics, with knowledge of colour theory and current design trends.
• Social Media Savviness: Familiarity with TikTok, Instagram, XHS, and other platforms, plus knowledge of content strategies.
• Soft Skills: Team player with excellent communication and collaboration abilities, capable of prioritising tasks and taking ownership of projects.
• Adaptability: Thrive in a fast-paced environment and manage multiple projects effectively.
• Passion for Green Living: An interest in gardening, sustainability, or green spaces is a big plus!

Why Join Us?

• Work Perks: Non-traditional perks such as free use of our commercial pickleball courts, free car and motorcycle parking, dining and other discounts at affiliated businesses, and the chance to work in a lush garden setting.
• Flexible Work Arrangement: Enjoy a flexible work model that promotes work-life balance while offering you some structure.
• Pet Care Leave: Not a parent but a paw-rent? Enjoy pet-care leave to take care of your pets.
• Collaborative Culture: Be part of a supportive team that values innovation and creativity.
• Growth Opportunities: Contribute to a brand on the rise, shaping how we connect with new audiences.

How to Apply

Send your resume, portfolio, and a brief introduction about why you’re the perfect fit to [email protected]. Showcase your best work and let us see how you can help bring our brand to life!

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Join now with Employment Icentives for Up to 8k!*

Gross monthly salary up to $4500.00 to $5500.00
Guaranteed $2540.00 +OT

Progressive Wage Mark Company!

Candidate must possess Class 3/4/5 License (No P Plate, no Class 3A)
Tailored training program and OJT training provided
Able to start work immediately/within short notice is bonus

*Conditions apply
Whatsapp: +6590217155 to apply
https://wa.me/message/VGXCAYOJ...

Tow Drivers to https://wa.me/message/VGXCAYOJQ7RUL1 to apply

* New Hires are eligible for employment incentives

Immedicate Vacancies

Driving Licence Class 3,4,5

Salary from $3,800 to $5,500

Must have a Singapore driving licence for more than a year

No P-plate

5 years or more towing / vehicle recovery experience required

Location is at 26 Chia Ping Road

Candidate must be willing to work at Jurong

Whatsapp : +6590217155

Whatsapp: Tow drivers to https://wa.me/message/VGXCAYOJQ7RUL1 to apply

* New Hires are eligible for employment incentives

Tow Truck Drivers

Immediate vacancies

Fulltime

Class 3/4/5 drivers

$1850- $3700 / mth guaranteed*

**1 month Performance Bonus awarded upon completion of 1 year of service.

Terms and conditions apply

Must have a Singapore driving licence for more than 1 year

No P-Plate

No experience required, OJT training provided

Location : 26 Chia Ping Road

The candidate must be willing to work at Jurong

Whatsapp : +6590217155

Company Name : Panasonic Factory Solutions Asia Pacific Pte. Ltd.

Address : 285 Jalan Ahmad Ibrahim Singapore 639931

Job Description

The Precision Machinist carries out structured work while adhering closely to standard work instructions and procedures. He/She sets up and operates special purpose equipment to fabricate metal components and parts. In the process, he/she is required to read and interpret sketches, drawings, manuals and specifications to determine the dimensions and tolerances of finished work pieces, sequences of operations and set-up requirements. He/She also observes the machines, detects malfunctions and makes adjustments to ensure smooth operations.

Requirements

• 'O' Levels or NITEC or Technical Certificate with experience
• Able to do Cylindrical Grinding or Conventional Milling or CNC Lathe
• He/She may be required to work on rotating shifts in a factory setting

Job Description

We are looking for a passionate Marketing Executiveto be part of the Marketing team. You will be responsible for marketing design initiatives and campaigns for retails brands.

Job Highlights

• Opportunities for Creative Innovation
• Career Development Opportunities
• Fresh Graduates Welcome to Apply

Responsibilities:

• Create and execute marketing campaigns across various channels, such as digital advertising, social media, email marketing, and traditional media.
• Monitor and analyse campaign performance metrics including delivery platforms, adjust strategies as needed, and provide regular reports on marketing activities and results.
• Collaborate with internal teams, including operation, research and development team, to ensure consistent messaging and effective execution of marketing initiatives.
• Manage social media accounts and online presence, engaging with customers, responding to inquiries, and driving user engagement.
• Handling customer feedback and concern on various platforms.
• Identify and evaluate opportunities for partnerships, sponsorships, and collaborations to expand brand reach and enhance brand image.
• Support the development of marketing collateral, including presentations, website content, and promotional materials.
• Support administrative duties from Marketing department.
• Any other work assigned by the manager from time to time.

Requirements

• Diploma in Business Administration, Marketing, Mass Communications, or related fields
• Entry Level Candidates are welcome to apply
• At least 1-2 years of experience in Marketing, A&P, Marketing Communication in the food & beverage industry will be desired
• Creative with an excellent aesthetic sense with a strong communication and presentation skills
• Sensitive to changes in consumer trends and lifestyles
• Willing to work in the West

Being part of Cummins means working alongside today’s most innovative thinkers to solve the world’s toughest problems. We are proud to offer learning and development opportunities designed to promote individual performance and spark purpose and trust within our teams. We look to hire the best and then help you to become even better.

Thank you for your interest in continuing to grow your Cummins career!

To plan and maintain daily supply chain operations for critical suppliers or customers in materials, production, inventory, logistics, customer service, demand management, or order fulfillment. Ensures internal and external customers' expectations and requirements are met. Achieving and continuously improving customer service levels, and/or manage inventory levels and targets, and managing supply and demand within the Supply Chain.

Key Responsibilities:

• Ensures internal and external customers' expectations and requirements are met.
• Manage the daily operational processes for a critical segment of the supply chain. Eliminate potential supply chain failures as part of the daily planning process.
• Champion preventive practices to eliminate expediting to supply chain leadership as appropriate to prevent problems.
• Lead cross functional stakeholders to develop and implement short and mid-term tactical improvements Complies with communication plans and processes to ensure stakeholders’ needs are met.
• Leverage common processes tools, and information systems Approve system strategies and advise on changes to planning systems parameters as required.
• Analyze and interpret KPIs to identify areas for improvement and action plans.
• Lead Six Sigma and functional process improvement teams. Liaise with functional stakeholders to mitigate mid-term supplier or customer constraints.
• Mentor and coach supply chain planners. Ensure common processes are being utilized and internal controls are in place.

*Qualifications and Competencies

Competencies:

• Collaborates - Building partnerships and working collaboratively with others to meet shared objectives.
• Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.
• Customer focus - Building strong customer relationships and delivering customer-centric solutions.
• Develops talent - Developing people to meet both their career goals and the organization’s goals.
• Ensures accountability - Holding self and others accountable to meet commitments.
• Global perspective - Taking a broad view when approaching issues, using a global lens.
• ​Materials Planning System Utilization - Uses the materials planning system to manage supply and demand plans taking long-term corrective action on exception messages and other alerts based on root cause analysis; occasionally refers to adhoc tools such as Excel, Access, TOAD, OMS, etc. in performing problem solving, while leveraging the materials planning system as the primary tool in day-to-day operations.
• ​Part Change Control Management - Evaluates and implements engineering change request (obsolescence, supersessions, new part release, etc.) to meet customer delivery requirements while minimizing excess and obsolete inventory.
• ​Plan for Every Part (PFEP) - Uses PFEP in planning, designing, and management of systems and processes within a facility to ensure delivery of right part at the right time in the right quantity to the right place, which in turn guarantees smooth operations; applies PFEP principles on the end to end supply chain with particular attention to the relationships between master data management, materials planning parameters, engineered material flows, transport management, and warehouse management.
• Analysis and Troubleshooting - Extracts, transforms, models, interprets, and presents planning data with the goal of mining useful information, troubleshooting, suggesting conclusions, and supporting value creating decision making.
• Master Supply Scheduling - Establishes and maintains a valid Master Production Schedule for a family of products, which meets customer’s expectations and requirements while maximizing operational efficiency; validates procurement scheduling, production scheduling, and replenishment planning are aligned to manufacturing and assembly assets for conversion.
• Material Planning - Uses advanced tools (e.g. Advanced Planning Command Centre, Business Intelligence (BI) Dashboards etc.) to take a decision related to parts availability, inventory optimization and root cause analysis.
• Materials KPI Management - Operates in relation to recent or historical outputs as compared to expectations of the organization to determine next steps to drive improvement; assesses gaps to the supply chain performance against the expectation of achieving target deliverables; interprets KPIs to understand end-customer impact; strategically balances trade-offs to influence one KPI while minimizing the impact to others.
• Values differences - Recognizing the value that different perspectives and cultures bring to an organization.

Education, Licenses, Certifications:

• College, university, or equivalent degree required.
  This position may require licensing for compliance with export controls or sanctions regulations.

Experience:

• Intermediate level of experience required. 3-5 years of relevant work experience preferred.

*Qualifications for Internal Candidates

• Responsible for the Logistics and customer service within the Northeast Southeast Asia Pacific Region
• Project Management related to improvements with the OE and Cummins channel in the NESEA region
• Managing warranty returns of product in exchange within the region
• Management of teams directly and indirectly, interactions with warehouse operations.

Job details:

• Actively seek out and engage with corporate clients to drive B2B sales.
• Develop and maintain strong relationships with customers in the car trade industry.
• Identify and pursue new business opportunities to meet and exceed sales targets.

Requirements:

• Proven experience in sales, preferably within the automotive industry.
• Strong negotiation and communication skills.
• Self-driven, with a hunter mentality to seek out new business opportunities.
• Preferably own a car.

What We Offer:

• Competitive basic salary with an attractive sales commission structure.
• Petrol/Transport reimbursement.
• Work location: West Coast

Offer Ranged: $1000 - $8000 (with high commission)

Job Details:

• Actively seek out and engage with corporate clients to drive B2B sales.
• Develop and maintain strong relationships with customers in the car trade industry.
• Identify and pursue new business opportunities to meet and exceed sales targets.

Requirements:

• Proven experience in sales, preferably within the automotive industry.
• Strong negotiation and communication skills.
• Self-driven, with a hunter mentality to seek out new business opportunities.
• Preferably own a car.

What We Offer:

• Competitive basic salary with an attractive sales commission structure.
• Petrol/Transport reimbursement.
• Work location: West Coast

**With high commissions

Purpose of the Position

Reporting to the Shift Supervisor, the Process Technician's primary responsiblity is to ensure the smooth operation of his/her assigned Process Unit, be it in either the Field or DCS Panel Operation.

Job Description

DCS Operation

• Perform starts up and shuts down according to Standard Operating Procedures, Work Instructions or Checklists.
• Monitor and control process variables via DCS (towers, reactors, driers, compressors, etc) to maintain quality & plant in steady & efficient condition.
• Respond to process alarms, process upsets or abnormal process conditions according to established practices and procedures in order to begin or cease production as advised by Supervisor or Engineers.
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements.
• Initiate and perform Safety bypass with approval from Supervisor.

Field Operation

• Performs equipment line-ups and operate towers, reactors, driers, compressors, pumps, etc according to established practices and procedures.
• Responds to upsets or abnormal process conditions according to instructions from Supervisor or Panelman.
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements.
• Collect process samples from assigned sampling points in a safe manner.
• Equipment Inspection Tours according to checklist.

Requirements

• NITEC in Chemical Process Technology /Diploma in Chemical Engineering or related discipline.
• Min. 1-2 years Operational experience with demonstrable exposure to Process Plant Operations and site-based activity or equivalent.
• Experience in Safety Awareness programs or involvement in Safety Committees will be an added advantage.

Job Description:

• Monitor and maintain accurate inventory levels of MRO materials and equipment.
• Conduct regular stock checks and audits to ensure inventory accuracy.
• Safely store MRO materials and equipment in the warehouse following proper guidelines.
• Implement proper labelling and categorization systems to ensure materials are easy to find.
• Process orders for maintenance parts and equipment requested by maintenance or operational teams.
• Ensure timely delivery of required parts to avoid delays in maintenance or production.
• Assist with sourcing and negotiating the purchase of MRO materials as needed.
• Maintain accurate records of inventory, requisitions, and shipments.
• Update computerized inventory systems or databases.
• Ensure the warehouse meets all safety standards, including proper handling of hazardous materials.
• Ensure that all MRO tools and equipment are in good working condition.
• Act as a liaison between the warehouse and other departments, ensuring clear communication regarding stock availability, order status, and material requirements.
• Oversee the calibration and maintenance of tools and equipment stored in the warehouse.
• Coordinate with maintenance personnel to ensure tools are functioning properly.
• Comply with all regulatory and environmental requirements.

Centre for Lifelong Learning and Individualised Cognition CLIC is a research collaboration between the University of Cambridge and Nanyang Technological University (NTU) and hosted by the Cambridge Centre for Advanced Research and Education in Singapore (CARES) that aims to develop neuroscience-based interventions for lifelong flexible learning. Launched in October 2020 and funded by the National Research Foundation Singapore, CLIC brings together a multidisciplinary team of psychologists, neuroscientists, linguists and educators who conduct innovative research in the science of learning.

The world of today is constantly evolving to keep pace with advances in technology and globalisation, requiring individuals to adapt and develop new skills to ensure resilience through a culture of lifelong flexible learning. Mental flexibility is required in order to adapt to change, problem-solve creatively in new situations and make the most of opportunities including emerging career opportunities. The capacity for cognitive flexibility is thus central to the modern digital age and our education system needs innovation to ensure citizens are equipped to develop these future skills. For example, major global challenges, including climate change, renewable energy, and food security, will require novel and creative approaches and solutions.

CLIC researchers are developing a neuroscience-based model of flexible learning, including important social contextual factors, in order to inform the design of practical, real-life interventions for use in schools and the workplace. This will ensure that individuals are not only prepared for future career success, but also have a good quality of life and wellbeing, thus supporting a flourishing society.

For more details, please view: https://www.cares.cam.ac.uk/research/clic/

We are looking for a Research Fellow to support research activities on neuroimaging, and training-related brain changes in adults. The role will focus on opportunities for involvement in research activities related to human neuroimaging, language, infant cognition/learning and pedagogy. We anticipate the successful candidate to perform within a dynamic interdisciplinary research environment working collaboratively with project team members.

Key Responsibilities:

• Perform computational modelling and analysis of the neuroimaging and behavioural data from cognitive and related domain tasks
• Development and implementation of neuroimaging data analyses pipelines Conduct analysis of data and summarise research findings
• Development and implementation of data transfer and curation protocols
• Liaise with other workgroups on data management and multi-modal analyses

Job Requirements:

• PhD degree in experimental psychology, biopsychology, cognitive psychology, neuropsychology, neurology, psychiatry, cognitive neuroscience, biomedical engineering, computer science, or related fields.
• At least 2 years of relevant experiences in similar role / technical hands-on experience in specific scope
• Advanced signal processing and programming skills (e.g. with Matlab, Python)
• Experience with neuroimaging techniques (MRI, EEG and/or TMS).
• Familiarity with image data analysis tools such as SPM, FSL, AFNI, and/or DSIStudio, etc.
• Experience with statistical packages, especially R and SPSS
• Good statistical knowledge and skills
• Good IT skills (i.e., Microsoft Office®)
• Strong ability to work within a multidisciplinary team
• Strong interpersonal, written and verbal communication skills
• Excellent organizational skills and able to work within given deadlines

We regret to inform that only shortlisted candidates will be notified.

Role Summary
Atomionics is seeking a detail-oriented and self-motivated individual to join our team as an Accountant and Secretary Associate. This role is ideal for someone looking to manage the financial operations of a fast-growing deep-tech startup while also contributing to administrative tasks that support our business. As we work towards revolutionizing the transition to a low-carbon economy with our innovative technology, you will play a key role in ensuring smooth financial processes and organizational compliance. If you’re excited about being part of a dynamic team at the cutting edge of quantum technology and have a passion for precision and learning, we welcome you to apply.

Responsibilities:

• Handle complete data entry related to financial transactions, ensuring accuracy and compliance.
• Process staff claims and obtain necessary supporting documents for verification.
• Prepare simple cash flow reports to monitor company liquidity and operational efficiency.
• Reconcile and manage bank statements, ensuring all transactions are accurately reflected.
• Administer employee ESOPs (Employee Stock Ownership Plans), ensuring proper documentation and compliance.
• File necessary documents with ACRA (Accounting and Corporate Regulatory Authority) and other relevant government bodies.
• Liaise with the legal team as required for corporate governance and compliance matters.

Requirements:

• Familiar with accounting standards such as IFRS (International Financial Reporting Standards) and inventory management accounting.
• Proficient in using financial software, including MRP Easy, Xero, and strong skills in Excel for financial analysis and reporting.
• Strong attention to detail, excellent organizational and communication skills.
• Ability to handle multiple tasks with minimal supervision and a proactive approach.

What We Offer:

• An opportunity to contribute to the financial management of a dynamic, high-growth startup.
• A collaborative work environment with opportunities for learning and professional growth.
• Hands-on experience in both financial and administrative functions in a deep-tech field.

Job Description:

At Tasek’s Art Lab, participants explore their artistic potential using unconventional methods and multi-medium artwork. Our exploratory and self-discovery approach creates a nurturing environment for participants to express their creativity fully.

We seek a passionate freelance Art Lab Instructor to guide and inspire primary school students in their creative journey. The instructor will deliver engaging, student-centric art sessions, helping participants develop their artistic style while encouraging confidence and self-expression.

Responsibilities:

● Plan and conduct art sessions for P1-P3 (10:00am - 11:00am) and

P4-P6 (11:00am - 12:30pm) students.

● Use exploratory and self-discovery approaches to foster creativity

and artistic development.

● Incorporate various techniques such as textual, painting, drawing, 3D

and experimental art.

● Create a positive, inclusive, and engaging learning environment

tailored to the abilities and interests of each age group.

● Provide constructive feedback and encourage students to take pride

in their artistic expression.

● Align lessons with Tasek’s mission of fostering creativity and

self-discovery through art.

● Encourage participants to present their artwork through

student-centric activities and during exhibitions.