Responsibilities and Duties

· Support operations team with installation of new machine and various control components

· Work within standard operating procedures

· Adopt proper installation & assembly techniques

· Ensure cleanliness & proper maintenance of all work tools

· Maintain good housekeeping in the workshop at all times

· On-site work and related support services

· Assist with material and logistics handling

· To carry out maintenance tasks such as modification, overhaul and repair works to the specified standard in accordance to the maintenance data

· Inspection of test instruments, general maintenance of tools and rigs, condition of consumables and general conditions of work area

SPECIAL NOTES:

The incumbent (s) of this position is expected to perform all other related duties as assigned

Responsibilities

1.Regulatory and Compliance Leadership:

· Serve as the primary point of contact for all regulatory and compliance matters related to Offshore Wind and Offshore Substation projects

· Develop and maintain a comprehensive understanding of international and local regulations, including environmental, local regulation such as BOEM, safety, and maritime regulations.

· Stay abreast of regulatory requirements, flag requirements, and industry best practices, developing and updating regulatory compliance plans,policies, and procedures.

2. Regulatory Review and Documentation:

· Conduct regulatory reviews of offshore substation designs and documentation to ensure compliance with relevant standards and regulations.

· Prepare and submit regulatory compliance documents, assist and collaborate with developer and/or client to provide input for permit applications, safety cases, and environmental impact assessments where require.

· Review and analyze reports from third-party consultants, providing critical feedback and recommendations.

3. Team Management and Development:

· Lead and mentor a team responsible for regulatory compliance and technical safety, setting objectives, monitoring performance, and providing career development guidance.

· Direct the team's progress in delivering regulatory requirements, plans,and reports, ensuring these are integrated into the design at an early stage.

· Manage the transformation of contractual specifications into cost-effective engineering solutions, following relevant codes, standards, and classification requirements.

4. Project Coordination and Support:

· Collaborate with other engineering disciplines (e.g., E&I, Piping,Mechanical) on problem areas related to regulatory compliance and technical safety.

· Provide regulatory compliance to commercial marketing, bidding, and procurement activities during pre-contract and contract development phases of Offshore wind and substation projects.

· Manage team coordination on design changes, ensuring follow-up on regulatory updates.

5. Interface and Liaison:

· Liaise with regulatory bodies, classification societies, third parties andother relevant authorities to obtain necessary approvals and certifications.

· Manage relationships with external consultants, regulatory specialists, and internal departments to ensure a holistic approach to compliance.

6. Strategy and Program Development:

· Develop and implement compliance strategies and programs to meet regulatory requirements and industry best practices.

· Initiate the development of compliance matrices to maximize team performance, accuracy, and design compliance.

· Contribute to the development of company policies and procedures related to regulatory compliance.

7. Risk Management and Auditing:

· Conduct internal audits to assess compliance with regulatory requirements and company policies specific to offshore wind and substation projects.

· Manage the development and maintenance of a recommendation register, ensuring that feedback from safety studies is integrated into project designs.

8. Reporting and Communication:

· Prepare regular reports on compliance status and regulatory risks for Project Engineering Manager.

· Review team reports for accuracy and liaise with customers, statutory, and classification authorities on design and compliance issues affecting production start-up.

9. Training and Development:

· Develop and deliver training programs to ensure staff awareness of regulatory requirements and compliance procedures.

· Provide career development guidance and routine administrative responsibilities, such as leave and course approvals.

Requirements

· Bachelor’s degree in electrical engineering, Marine Engineering, Environmental Science, or related field, an advanced degree is preferred.

· Minimum of 5-7 years of experience in regulatory affairs and compliance within the offshore industry.

· In-depth knowledge of international and local regulations applicable to offshore wind engineering and substation design.

· Strong understanding of risk assessment and management principles.

· Experience in preparing and submitting regulatory compliance documents and permit applications.

· Familiarity with technical aspects of offshore wind and Offshore substations, including high voltage systems, grid connection requirements, and marine engineering considerations.

· Proven experience in leading teams, mentoring, and guiding junior engineers.

· Excellent analytical, problem-solving, and communication skills.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Amiralty Yard)

60 Admiralty Road West, Singapore 759947

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

SHOP SUPERVISOR:-

Provide good customer service

Display and replenish bakery items and products on the shelves and counters

Slicing breads with safety gloves

Assist customers in placing orders and for collection of cakes

Washing of trays and utensils

Basic housekeeping duties to ensure the storefront is clean and tidy

Ensure compliance to all food hygiene standards

Assist with inventory check and cashiering duties

Answer phone calls and customers' enquiries politely

Any other duties as assigned by the Supervisor/ Manager

Job Requirements:

Prior experience in similar field will be an added advantage

No experience applicants are welcome to apply as training will be provided

Physically fit as required to carry loads (when required) and able to stand for long hours

Able to work on weekends, public holidays and rotating shifts

The ideal candidate should be knowledgeable about software development and common software engineering practices, with the ability to design and propose software architectures and solutions. They should possess a strong understanding of software engineering and system design principles.

Duties/Responsibilities:

• Collaborate with stakeholders to understand their business requirements and translate them into technical requirements.
• Work closely with the development team to ensure the delivered solution meets the business needs.
• Design and propose software architectures and solutions that align with business goals.
• Conduct research and analysis to identify trends, best practices, and technologies that can improve the software development process.
• Provide guidance and support to the development team throughout the development lifecycle.
• Participate in meetings and discussions to provide insights and recommendations on technical matters.
• Document and communicate technical concepts to non-technical stakeholders.
• Stay updated with the latest technologies and trends in software development and low-code/no-code technologies.

Requirement, Skills:

• Bachelor's degree in Computer Science, Software Engineering, or related field.
• Proven experience as a Business Analyst or similar role in software development.
• Strong knowledge of software engineering and system design principles.
• Excellent analytical and problem-solving skills.
• Ability to work effectively in a team environment.
• Strong communication and interpersonal skills.
• Experience with Agile methodologies is a plus.

Skills and responsibilities:

• Utilize commercial and in-house EDA tools (e.g. Synopsys, Cadence, Siemens) for the design and implementation of 100 ~ 400 million gate integrated circuits in 7nm/5nm/3nm/2nm process technologies.
• Proficient with a full Netlist/Gates to GDS flow, inclusive of all construction stages (e.g. RTL synthesis, placement, clock tree synthesis, detailed routing, physical verification, formal verification and timing analysis) for complex digital blocks of up to 12Mgates/3M instances with embedded macros. Ability to handle multiple block assignments in parallel is required.
• Proficiency in UNIX/Linux and scripting languages is advantageous.

Required Qualifications:

• Degree, Masters or PhD in Electrical/Electronics/Computer engineering.
• Minimum of 2 years or more experience in a relevant field.

Responsibilities and Duties

· Develop a deep understanding of design specifications based on

customer requirements, , organizational goals, and business

strategies. Conceptualize and develop solutions based on project

requirements and Company standards through the use of

simulations/modelling to support design concept used.

· Develop design specification sheet based on Mechanical design and

update as and when required and distribute to relevant Develop

system architecture based on mechanical design, flow chart and

other control system requirement specified by customer taking in to

consideration of optimised design for manufacturing, cost, quality

and safety.

· Initiate and carry out internal design reviews to share and explain

the completed modules with other departments.

· Initiate and carry out design review with customer based on project

schedule

· Revise design and documents based on both internal and external

review

· Create wiring diagram for various control panels and filed wiring and

approval from department manager

· Create Bill Of Materials (BOM) for various panels and sub panels based on design schedule given

· Create drawing release file and send out drawings for panel and field

wiring quotation

· Send out standard part list for quotation based on BOM

· Receive quotation and make price comparison spreadsheet

· Raise PR and get department manager approval and send to

Purchase department for negotiation and ordering

· Prepare offline PLC/PC program for various panels based on the

design requirements.

· Make necessary modifications needed, update design, drawings and

get approval from department manager.

· Release revised drawings to wiring and assembly team

· Support panel and filed wiring team as and when necessary

· Carry out PLC I/O configuration, Netother devise driver set up and

carry out I/O check and wiring integrity check

· Set up and debug PLC/PC program

· Carry out all the activities based on the project schedule given

· Meet quality standards while maintaining working knowledge of

relevant technologies and best practices, and upholding company

policies, internal, customer standards for machine building and

safety.

· Develop, train, and educate junior engineers, guide technical

direction, and act as a technical liaison between customers

SPECIAL NOTES:

The incumbent (s) of this position is expected to perform all other related duties as assigned

Programmer to programs design and built machines.

Min Diploma Education, min 3 years related experience needed

The requirement

• Design Electrical Panel and Control systems for automated machines
• Design System control and Software architecture
• PLC Programming, Debugging, Testing and support Site Installations.
• Coordinate with Mechanical Design department meet the overall Project Objectives.
• Communicate with Customer to understand specific requirements
• Work closely with project engineers in implementation, improvement and troubleshooting
• Develop new control system as and when required
• Update and Upkeep Electrical documentations
• Prepare Electrical Project Documentation for CustomerBasis

Requirements:

· Bachelor’s Degree/Diploma in Electrical/Mechatronics.

· At least 3 years experiences in Industrial Automation systems with PLC control Systems

· Proficient in Allen Bradley PLC, HMI programming

· Able to program other common PLCs such as Omron, Mitsubishi, Siemens and Keyence is desirable

· Willing to travel in the Asian Regions.

· Extensive knowledge and experience in process automation system

Key Responsibilities:

• Verify suppliers’ invoice with supporting documents (e.g. DO, PO etc)
• Arranging for payment to suppliers’
• Responsible for monthly closing of AP
• Responsible for bank reconciliation & schedules
• Responsible for AR interco billings
• Assist in intercompany reconciliation
• Responsible to prepare for Quarterly GST filing
• Assist in cashflow planning & budgets
• Assist in monthly closing
• Assist in year-end closing
• Other ad-hoc duties when required
• Able to work in a dynamic and changing environment
• Willing to learn and accept new work scope when required.mer accounts as necessary.
• Prepare and assist in AR aging analysis and reporting.
• Assist in providing necessary documentation for audits.
• Perform other ad-hoc duties and tasks as assigned by the Finance Manager or Supervisor.

Job Requirements:

• Possess Diploma in Accounting or related field.
• Minimum 2 years of relevant experience in accounts receivable and accounts payable functions.
• Proficiency in the use of ERP accounting software and Microsoft Office Suite.
• Strong attention to detail and data accuracy.
• Ability to work well under pressure and meet deadlines.
• Good communication and interpersonal skills.
• This position may require occasional overtime during peak periods.
• Ability to adapt to changing priorities and multitask effectively.

Key Responsibilities:

• Verify suppliers’ invoice with supporting documents (e.g. DO, PO etc)
• Arranging for payment to suppliers’
• Responsible for monthly closing of AP
• Responsible for bank reconciliation & schedules
• Responsible for AR interco billings
• Assist in intercompany reconciliation
• Responsible to prepare for Quarterly GST filing
• Assist in cashflow planning & budgets
• Assist in monthly closing
• Assist in year-end closing
• Other ad-hoc duties when required
• Able to work in a dynamic and changing environment
• Willing to learn and accept new work scope when required.

Job Requirements:

• Possess Diploma in Accounting or related field.
• Minimum 2 years of relevant experience in accounts receivable and accounts payable functions.
• Proficiency in the use of ERP accounting software and Microsoft Office Suite.
• Strong attention to detail and data accuracy.
• Ability to work well under pressure and meet deadlines.
• Good communication and interpersonal skills.
• This position may require occasional overtime during peak periods.
• Ability to adapt to changing priorities and multitask effectively.

Key Responsibilities:

• Verify suppliers’ invoice with supporting documents (e.g. DO, PO etc)
• Arranging for payment to suppliers’
• Responsible for monthly closing of AP
• Responsible for bank reconciliation & schedules
• Responsible for AR interco billings
• Assist in intercompany reconciliation
• Responsible to prepare for Quarterly GST filing
• Assist in cashflow planning & budgets
• Assist in monthly closing
• Assist in year-end closing
• Other ad-hoc duties when required
• Able to work in a dynamic and changing environment
• Willing to learn and accept new work scope when required.

Job Requirements:

• Possess Diploma in Accounting or related field.
• Minimum 2 years of relevant experience in accounts receivable and accounts payable functions.
• Proficiency in the use of ERP accounting software and Microsoft Office Suite.
• Strong attention to detail and data accuracy.
• Ability to work well under pressure and meet deadlines.
• Good communication and interpersonal skills.
• This position may require occasional overtime during peak periods.
• Ability to adapt to changing priorities and multitask effectively.

Job Responsibilities

• Model development, construction, documentation and production techniques.
• Prepares and update Revit Model (coordination drawing).
• Attend on site BIM meetings.
• Prepares and update (2D and 3D) shop drawing, detailing and as-built for submission.
• Create Revit families with parameters as per project specific.
• Ensuring that all drawings are compliant with project specifications and requirements.
• Work closely with Project/A&A Teams on drawing amendments and updates.
• Assist the coordinators on design, drawing documentation, drafting matters etc.

Job Requirements

• Relevant Certificate/ Diploma/ Degree or equivalent.
• Specialist Diploma in BIM (by BCA) will be an advantage.
• Working experience on site in building or civil engineering project will be an advantage.
• A good knowledge of AutoCAD and MEP modelling in Revit is required.
• Minimum 3 years’ experience in AutoCAD drafting, design, modelling. technical, planning or engineering.
• Minimum 2 years’ experience in BIM authoring software (Autodesk Revit, Navisworks, etc).
• Able to read and understand working drawings (M&E, architectural and structural).
• Able to create Revit families with parameters.
• Able to work independent, self-motivated, responsive and positive work attitude.

Responsibilities and Duties

· Develop a deep understanding of design specifications based on customer requirements, , organizational goals, and business strategies. Conceptualize and develop solutions based on project requirements and Company standards through the use of simulations/modelling to support design concept used.

· Develop design specification sheet with relevant info related to the project and update as and when required and distribute to relevant parties.

· Carry out detailed cycle time study for individual modules to select the appropriate machine or module design. Develop 3D model of the machine and/or modules assigned with optimised design for manufacturing, cost, quality and safety.

· Initiate and carry out internal design reviews to share and explain the completed modules with other departments.

· Initiate and carry out design review with customer base on project schedule

· Revise design and documents based on both internal and external review

· Create and update flow chart for the module or the entire machine

· Create part drawings and assembly drawings based on approved design and obtain approval from department manager

· Create Bill Of Materials (BOM) for the modules assigned based on design schedule given

· Create drawing release file and send out drawings for quotation

· Send out standard part list for quotation based on BOM

· Receive quotation and make price comparison spreadsheet

· Raise PR and get department manager approval and send to Purchase department for negotiation and ordering

· Promptly support any design issues discovered during fabrication and /or assembly stages

· Make necessary modifications needed, update design, drawings and get approval from department manager.

· Release revised drawings to supplier and internal assembly team

· Support machine assembly team as and when necessary, with set up and fine tuning of machines

· Carry out all the activities based on the project schedule given

· Meet quality standards while maintaining working knowledge of relevant technologies and best practices, and upholding company policies, internal, customer standards for machine building and safety.

· Develop, train, and educate junior engineers, guide technical direction, and act as a technical liaison between customers

SPECIAL NOTES:

The incumbent (s) of this position is expected to perform all other related duties as assigned

Responsible:

• Packing of electronics components (Hard disk)
• Strapping of pallets
• Carry heavy loads up till 20kg

Salary : $10/hour

Working days and hours: [5 days work week, 8.30am to 6pm]

(Sunday, Monday, Tuesday, Wednesday (Off), Thursday, Friday (Off), Saturday)

Working Location: Senoko Loop

Assistant Electrical EngineerAssist Engineer on Electrical design drawing- Assist Engineer on assembly / installation of custom-made machine- Assist Engineer on day to day tasks

Requirement- Minimum Bachelor Degree in Mechatronics / Electrical- Preferably with knowledge in Solidworks and AutoCAD- Minimum 1 - 2 years of relevant working experience, no experience will be considered- Good learning attitude, team player

ob Responsibilities and Duties :

- Develop a deep understanding of design specifications based on customer requirements, , organizational goals, and business strategies. Conceptualize and develop solutions based on project requirements and Company standards through the use of simulations/modelling to support design concept used.

- Develop design specification sheet with relevant info related to the project and update as and when required and distribute to relevant parties.

- Carry out detailed cycle time study for individual modules to select the appropriate machine or module design. Develop 3D model of the machine and/or modules assigned with optimised design for manufacturing, cost, quality and safety.

- Initiate and carry out internal design reviews to share and explain the completed modules with other departments.

- Initiate and carry out design review with customer base on project schedule

- Revise design and documents based on both internal and external review·

- Create and update flow chart for the module or the entire machine

- Create part drawings and assembly drawings based on approved design and obtain approval from department manager

- Create Bill Of Materials (BOM) for the modules assigned based on design schedule given.

- Create drawing release file and send out drawings for quotation

- Send out standard part list for quotation based on BOM.

- Receive quotation and make price comparison spreadsheet

- Raise PR and get department manager approval and send to Purchase department for negotiation and ordering.

- Promptly support any design issues discovered during fabrication and /or assembly stages

- Make necessary modifications needed, update design, drawings and get approval from department manager.

- Release revised drawings to supplier and internal assembly team.

- Support machine assembly team as and when necessary, with set up and fine tuning of machines.

- Carry out all the activities based on the project schedule given.

- Meet quality standards while maintaining working knowledge of relevant technologies and best practices, and upholding company policies, internal, customer standards for machine building and safety.

- Develop, train, and educate junior engineers, guide technical direction, and act as a technical liaison between customers

Skills and responsibilities:

• Utilize commercial and in-house EDA tools (e.g. Synopsys, Cadence, Siemens) for the design and implementation of 100 ~ 400 million gate integrated circuits in 7nm/5nm/3nm/2nm process technologies.
• Proficient with a full Netlist/Gates to GDS flow, inclusive of all construction stages (e.g. RTL synthesis, placement, clock tree synthesis, detailed routing, physical verification, formal verification and timing analysis) for complex digital blocks of up to 12Mgates/3M instances with embedded macros. Ability to handle multiple block assignments in parallel is required.
• Proficiency in UNIX/Linux and scripting languages is advantageous.

Required Qualifications:

• Degree, Masters or PhD in Electrical/Electronics/Computer engineering.
• Minimum of 5 years or more experience in a relevant field.

To ensures that all supply chain processes, meet stringent quality standards. This role involves close collaboration with suppliers, logistics, and internal teams to maintain consistency, reduce risks, and enhance customer satisfaction by upholding product and process quality.

1. Assists develop and setup a standardize FSMS (HACCP as based) that meet the legal and regulation compliance demand across various national and international legal frameworks.

2. Assist Setup food safety internal audit system to verify the effectives of the FSMS implementation.

3. Assist manage variation in the food safety of compliance system in local sites due to resource and culturally different.

4. Assist setup supplier food safety control system and supplier food safety audit system.

5. Develop and provide training for food safety and quality requirements.

6. Develop and maintain documentation such as SOP’s, as well as maintenance of manuals, policies and procedures as relate to any food safety concerns.

7. Update existing food safety procedures and documentation to keep up with changing requirements.

8. Oversee proper maintenance and sanitation of all facility to comply with food safety requirements.

9. Ensure that all company food safety and quality assurance procedures are followed and documented correctly at all times.

10. Plan, Arrange a monitor outlet food product microbial test result and trend analysis.

11. Be the main contact point with SFA (Singapore Food Agency).

12. Conduct facility food safety audits as well as manage third party audits e.g SS444:2018 / ISO 22000

13. Assist on provide Food Safety consultancy and food safety audit for PUTIEN sister company / Partner / Franchisee.

14. Assists prepare periodical FSMS implement progression and outcome report and review the effectiveness’ of the FSMS implementation.

15. Work closely with operation team on provide technical assistant and guidance in conducting food safety related investigation on customer feedback and nonconformance issues and give recommendation for continual improvement.

16. Conduct routine inspection for products processed at production.

17. Assists and involve in 3rd party food safety audit or inspection.

18. Provide assistant in any ad hoc assignment if any

Qualifications:

• Diploma / Degree (Preferably in Food Science, Food Technology)
• Familiar with Word, Excel, and PowerPoint.
• Good written and verbal communication skills.
• At least 1 year experience as QA / QC
• Relevant experience in food manufacturing sector will be an added advantage
• Positive working attitude with good adaptability
• Strong eyes for details
• Strong analytical and problem-solving skills
• Bilingual in both spoken and written English
• Computer literacy
• Willing to take initiatives
• Comprehensive knowledge of HACCP, GMP’s, and GHP’s.

Working location at Senoko South Road

Job Description

• Managing of daily sales activities and processing of orders.
• Maintaining close communication with customers, production, and supply chain teams to ensure timely fulfilment of orders.
• Professional handling of enquiries and assisting customers to provide effective solutions. Timely follow up to ensure resolutions.
• Consolidating and providing of documents and samples for customers’ order related information as required.
• Ensure timely invoicing to customers and proper collection of reusable drums.

Requirements

• Good organization skills
• Good customer service communication skills
• Willing to pick up basic product technical skills
• Ready for a fast-paced environment
• There will be opportunities for career progression and to learn to pick up other skills such as export markets based on interest and alignment.

Qualifications

• ‘O’ levels equivalent and higher (Fresh diploma graduates are welcomed)
• Proficient in Microsoft Office

Job Responsibility:

• To prepare documentation for tender submissions.
• To develop tender strategies and oversee tender estimation responsibilities.
• To coordinate with all parties to provide accurate analysis of the participated project, including collating critical information and preparing final submission documentation.
• To lead and monitor the QS team for variation works, progress claims, and cost control.
• To develop and improve departmental workflow and productivity.
• To liaise with main contractors, subcontractors, clients, and suppliers/vendors for project claims and cost issues.
• To develop standards for contracts, including the presentation of budgets, payment terms, etc.
• To review the contractual performance of all parties to ensure compliance with terms and conditions.
• To periodically report work progress to senior management.

Requirement:

Diploma or Degree in Construction Management/Building /Quantity Surveying

Minimum 5-years of relevant working experience in the Construction industry.

Meticulous and systematic individual with positive working attitude

Good oral & written communication skills

Multi-tasking and is able to handle stress

Job Description & Requirements:

• Manage, control and monitor all project activities such as engineering design, site execution, testing and commissioning of project

• Attend project meeting and prepare report for project progress update

• Prepare project budget and cost estimation

• Plan and co-ordinate on the project progress and schedule and ensure timely completion

• Coordinate and plan to achieve project milestones, project deliverables and schedule monitoring

• Prepare / review as built iso for claim purpose, follow up with client for any outstanding DOs/Claims

• Prepare / review as built iso for claim purpose, follow up with client for any outstanding DO issued

Competency Requirements

• Diploma or Degree in Mechanical Engineering

• At least 2 years of working experience in the related field

• Proficient in Microsoft Office

• Multi-tasking team player with excellent interpersonal and communications skills

• Develop ATE test program, test hardware and bench evaluation board for analog, digital and power semiconductor devices.
• Research new test methodology for better test coverage and test time reduction.
• Work with multi-functional team to meet new product release schedule
• Proficiency in C++ Programming
• Degree in Electrical/Electronics Engineering
• Fresh graduates with good academic result are welcome to apply.

• Maintain full sets of accounts
• Assist in day-to-day accounting and administrative functions
• Responsible on AP/AR/GL data entry
• Verify accuracy of vendor invoices, staff claims and petty cash reimbursement
• Assists in the preparation of quarterly GST filing
• Responsible for yearly audit and tax computation
• Monitoring and reporting of daily cashflow, ensuring funds are readily available
• Prepare and send statement of Accounts to customer
• Perform and other ad-hoc duties as requested or assigned
• Proficient in using accounting software and Microsoft Excel

Min Diploma or it's equivalent
Fresh entry candidates are welcomed to apply
Proficient in using Microsoft Office suite, particularly Word, Excel, and PowerPoint
To handle phone calls and attend to customers, to liaise with Chinese speaking clients
Training will be provided for fresh entry candidate.
Diligent and is willing to learn

Project Leadership & Oversight:

• Lead and manage all phases of construction projects, including planning, design, execution, and closeout.
• Supervise and mentor project managers, assistant project managers, and field teams to ensure project success.
• Provide strategic direction and make key decisions regarding project timelines, resource allocation, and risk management.
• Serve as the primary point of contact for clients, subcontractors, and vendors throughout the project lifecycle.

Budget & Schedule Management:

• Develop, manage, and track project budgets, schedules, and timelines to ensure that projects stay within scope and financial constraints.
• Prepare and review cost estimates, change orders, and progress reports.
• Conduct regular project reviews and provide updates to senior leadership and stakeholders.

Contract & Vendor Management:

• Negotiate contracts with subcontractors, suppliers, and vendors, ensuring favorable terms and compliance with project requirements.
• Ensure the timely procurement of materials and resources to avoid delays.
• Monitor subcontractor performance and compliance with contractual obligations, including safety, quality, and schedule.

Risk & Quality Management:

• Identify potential project risks and develop mitigation strategies.
• Oversee quality control measures to ensure that all construction activities meet industry standards and client expectations.
• Ensure strict adherence to safety protocols and regulatory compliance on all job sites.

Stakeholder Communication & Reporting

• Maintain effective communication with clients, project stakeholders, and team members, ensuring that all parties are aligned and informed.
• Prepare and deliver presentations, reports, and project updates to clients, senior management, and other key stakeholders.
• Resolve any project-related issues or disputes in a timely and professional manner.

Qualifications:

• Bachelor’s degree in Construction Management, Civil Engineering, Architecture, or a related field.
• Minimum of 7-10 years of experience in construction project management, with at least 5 years in a senior or leadership role.
• Proven experience managing large-scale, complex construction projects.
• Strong understanding of construction processes, budgeting, contract management, and scheduling.

Skills:

• Excellent leadership, organizational, and communication skills.
• Advanced knowledge of construction management software (e.g., Procore, Buildertrend, Microsoft Project, etc.).
• Strong problem-solving abilities and attention to detail.
• In-depth knowledge of safety regulations, quality control, and risk management.
• Ability to manage multiple priorities and work effectively under pressure

A construction operations manager typically has a wide range of responsibilities, which can include the following

• Managing projects from beginning to end, including planning, scheduling, budgeting, coordinating with other teams, and supervising workers.
• Developing and enforcing safety standards, policies, and procedures for the workplace.
• Evaluating safety standards on site and enforcing regulations to ensure worker safety.
• Overseeing the bidding process for contracts and hiring subcontractors or outside labor when necessary.
• Managing the project budget, including ordering supplies and materials as needed.
• Directing and overseeing all aspects of construction projects from start to finish, including scheduling and organizing workers’ tasks and materials.
• Working with architects, engineers, contractors, and subcontractors to develop construction plans and schedules.
• Ensuring that all projects are completed on time and within budget by managing daily operations such as equipment maintenance and labor scheduling.
• Reviewing blueprints and other plans to determine how best to implement a new construction project