As a Senior Piping Engineer, he/she shall act as key person of the project as designated by Piping Department Manager and Lead Piping Engineer and performs the function inherent to this position. Responsible for the preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection. Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information. He/She will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties and Responsibilities:

• To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• To assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
• To coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project as directed by Piping Design Supervisor.
• To prepare piping information list and layout and document list following standard procedure created for the project.
• To prepare piping general specification inclusive of specification for piping arrangement, piping support standards.
• To interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.
• To develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors and reactors, preferably in 3D CAD format.
• To check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To provide field engineering support/advice towards piping installation and testing at construction site.
• To perform the function inherent to Piping Key Person as designated by Piping Department Manager and Lead Piping Engineer.
• To evaluate the performance of and provide counseling and guidance to members of the project.
• To prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
• To perform other tasks that may be assigned by the Department Manager and Lead Piping Engineer.
• To carry out engineering support work during the construction phase of the project.

Requirements:

Education:

• Bachelor degree of any four years BS Engineering course preferably Mechanical Engineering or at least ten (10) years related experience and/or training; or equivalent combination of education and experience.
• Minimum of eight (8) years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, three (3) years of which in a supervisory capacity.

Skill Requirements:

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good Knowledge of AutoCAD.
• Good knowledge of SP3D.
• Basic knowledge of 3D Model review through Naviswork or SPR.
• Interpretation of stress/vibration analysis report.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.
• Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.
• Strong leadership qualities and analytical and reasoning abilities.
• Good interpersonal and communication.

Position Summary:

The Systems Engineer undertakes complex projects related to systems

provisioning, installations, configurations as well as monitoring and

maintenance. He/She applies highly developed specialist knowledge and

skills in systems administration and works toward continuous optimisation

of systems performance. He/she implements systems improvements and

instructs other IT staff in the resolution of complex issues. He/She is required

to be on standby with on-call availability with varied shifts including

nights, weekends and holidays.

He/She is able to quickly and effectively solve issues as they arise. He/She is able

to methodically identify the cause of the issue, evaluate it and develop a

solution in

collaboration with the team. He/She communicates effectively and displays

high level of service standards.

Role and Responsibilities:

Execute Systems Administration Service Levels

• Monitor systems performance and usage, including response times
• Supervise backups, optimisation, initiation of recovery procedures and routine troubleshooting
• Communicate regularly with technical, applications and operational staff to ensure systems integrity and security
• Determine the systems’ short- and long-term requirements
• Manage systems report production

Advise on System Capabilities

• Advise senior leaders on system concepts and functional capabilities
• Provide technical advice to the team and clients on installation, setup configuration of systems
• Interpret internal or external business issues and recommends solutions/best practices
• Implement plans to make systems available to users in a shared, secure and controlled manner

Develop New Systems

• Lead the development of new systems as per the system requirements
• Design security and integrity controls
• Conduct new systems testing and implementation
• Define the system maintenance procedures
• Analyse the use of new systems to identify enhancement needs
• Lead research initiatives for the development of advanced and automated approaches for system administration
• Optimise systems performance
• Seek opportunities to optimise the delivery of systems services with emphasis on availability, reliability, scalability, and security
• Conduct regular system audits and upgrades
• Develop automated processes to define, measure, and report on service quality, stability and capacity Resolve issues
• Oversee the assessment of risks to systems
• Identify complex system issues to provide advisory to the stakeholders
• Investigate cause of systems issues
• Resolve complex issues
• Provide escalation support for issues presented by the user

Requirements / Qualifications

• Degree in Computer Science, Engineering or equivalent.
• At least 5 - 8 years’ experience in developing, implementing and
• maintaining IT systems
• Systematic in approach and familiar with enterprise level troubleshooting.
• Strong communications skills with stakeholders and ROs.
• Experience in healthcare applications preferred and/or willing to take up the challenges in a healthcare related industry.

Position Summary / Project Description

This is for the Automation Team under the Systems Technologies which focuses on DevOps and automation for internal IT that includes a lot of automation work around IaC.

Roles And Responsibilities

• Design, develop and implement various infrastructure automation and robotic process automation to transform current operation processes.
• Present ideas for process/system transformation
• Work with various process owners and teams to develop and implement proposed ideas and automate repeatable tasks
• Ensure smooth transition of processes

Requirements / Qualifications

• Minimum Degree in Computer Science / Information Technology or equivalent.
• Proficient in automation technologies such as Ansible, Chef, CI/CD, Jenkins, Terraform etc.
• Minimum 4 years and above of relevant hands-on experience in system operation support and project management.
• Proven ability to work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation and excellence.
• Experience in troubleshooting, resolving, and communicating incidents and underlying issues to identify root cause.
• Possesses strong analytical skills to diagnose and address application problems.
• Result and customer oriented with multi-tasking capabilities

Responsiblities:

• Responsible for ferrying of staff and dispatch works as assigned
• Ensure timely collections and deliveries of goods / items
• Ensure cleanliness and general upkeep of vehicles at all times
• Perform routine inspection of vehicle and notify of occurring deficiencies or needs for repairs
• To perform work according to health and safety regulations
• Ensure safety practices and housekeeping is to maintained to the highest standard
• To perform Ad-Hoc duties as per assigned

Requirements:

• Class 3 / 4 Driving License
• Familiar with Singapore route
• Min 2years of relevant experience

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.

We are looking for people who

• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

About the role

Works closely with and have impact on: Global Quality Assurance Team

Reports to: Senior QA Engineer

Function: Global QA

Work Location/Site: Singapore / GHQ

Internship Duration: Any 3 months between January to May 2025

Role Overview

The QA intern will support the quality and various project teams with validation needs in MasterControl, our cloud-based Quality Management System (QMS) for HSO.

Duties and Responsibilities

• Assist to perform validation duties to ensure software validation project and corresponding deliverables adhere to current regulations and quality standards
• Actively contribute towards continuous improvement of the quality team by suggesting new ideas and promoting innovative culture through improving and optimizing analysis of quality data and process workflows
• Provide support to record management and archiving activities
• Support post-migration and improvement activity works for the QMS
• Assist with QMS Modules improvement and maintenance activities
• Participate in team activities and initiatives related to QMS and regulatory requirements
• Other duties as assigned

Requirements

Experience

• N/A

Skills/Accreditations

• Microsoft office skills essential. Candidates with Excel Macro skills preferred
• Some Quality system knowledge will be advantageous
• Self-awareness and Good work ethics
• Strong communication and interpersonal skill

Academic Qualifications

• Pursuing Diploma or Degree Preferably in Science or Engineering

Travel requirements

• N/A

By submitting your application, you agree that your personal data will be collected, disclosed, and retained by HOYA Group for assessing suitability for employment and verification purposes.

We regret to inform you that due to the number of applications received, only shortlisted applicants will be notified. Thank you for your kind understanding.

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.

We are looking for people who

• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

Job Description

About the role

Works closely with and have impact on: Sales, Marketing, Regulatory Affairs, Quality Assurance, Research & Development, Operations

Reports to: Project Manager (Global Projects)

Function: Global Commercial

Work Location/Site: Singapore / Global Headquarters

Role Overview

The Project Manager is responsible for ensuring that assigned project deliverables are completed on time, within scope, and in line with expectations. This role works very closely with cross-functional stakeholders in Regulatory Affairs (RA), Quality Assurance (QA), Supply Chain Management (SCM), Marketing, and Sales, and must facilitate collaboration to drive project progress, with focus on global market and regulatory compliance.

Duties and Responsibilities

• Manage assigned project and adapt work as required proactively
• Coordinate internal resources to execute project effectively and ensure resource allocation
• Ensure that all project milestones are delivered on-time, within scope and within budget
• Identify gaps, risks and roadblocks in the project workstreams, gather supporting data, solve problems to drive project outcomes
• Proactively identify and manage risks in projects with required mitigation actions
• Escalate any risks and resource needs identified in projects and/or workstreams to management as required
• Communicate effectively on project progress, risks and mitigation plan on a regular basis
• Measure project performance thru established KPIs and report to management regularly
• Conduct data analysis for project planning purposes
• Develop and/or modify project plans and track their progress
• Lead project (workstream) core team meetings
• Create and maintain all required project documentation
• Conduct project reviews and create detailed reports for management
• Prepare updates for the Steering Committee
• Provide mentorship to team member to foster a culture of innovation, collaboration, and continuous improvement

Requirements

Experience

• 3-5 years’ experience in a related area (project management, medical device, pharmaceutical biotechnology etc)
• Proven working experience as a project manager with successful projects accomplishment history and ability to champion cross-functional project team by deploying the project management processes
• A PMP Certification (Project Management Professional) is preferred.

Skills/Accreditations

• Capable of actively collaborating with various stakeholders, demonstrating a servant leadership mindset
• Self-starter and the ability to proactively drive initiatives
• Exceptional communication skills, both verbal and written
• Excellent organizational skills
• Advanced data analysis skill and MS Excel skills
• Strong business acumen and financial analytical skill
• Knowledge and experience in medical device industry is a plus
• Basic finance knowledge will be an advantage
• Comfortable working across global site locations and time zones

Academic Qualifications

• At least bachelor’s degree in engineering or business management

Travel requirements

• Up to 20% of time

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

• Seniority Level
  Mid-Senior level
• Industry
  Medical Equipment Manufacturing
  
• Employment Type
  Full-time
• Job Functions
  Project Management
  Analyst
  Business Development
  
• SkillsStatistical Data Analysis
  Project Management Training
  Medical Devices
  Supply Chain Management
  Data Analytics
  Project Management
  Quality
  

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Applications are invited for the following full-time position in the Saw Swee Hock School of Public Health:

A research assistant position is available in the Saw Swee Hock School of Public Health to support the Principal Investigators in research projects in the areas of Environmental and Cancer Epidemiology.

Major duties and responsibility of the position include but are not limited to:
• Data collection and management
• Literature review
• Data analysis using software such as R, Stata or SAS.
• Designing, testing, and administering surveys and questionnaires
• Research coordination
• Preparation of reports, presentations, manuscripts.

The candidate must be an independent, highly motivated, and mature worker who is well-organized and demonstrates a growth mindset. Candidate must possess excellent written and verbal communication skills. He/She must have strong interpersonal skills and the ability to work effectively with colleagues to achieve team goals. Good proficiency in the following areas is preferred:

1. Microsoft Office Applications, particularly MS Word, Excel, Powerpoint
2. Experience in R, Python

The successful applicant is expected to possess at least a Bachelor’s Degree in Epidemiology, Public Health, Environmental Health, Biological Sciences, Biostatistics, Data Science, preferably with relevant experience. Prior experience with machine learning is a plus.

Recruitment is open immediately and will continue until the position is filled. Applicants should send a brief statement of interest, CV, three named references, and other supporting documents during the application. In your statement of interest, please highlight your relevant experience and interest in environmental and cancer epidemiology research.

We regret that only shortlisted candidates will be notified.

COMPANY DESCRIPTION

Hafnia is one of the world's leading oil product tanker owners and operators. We provide transportation of oil and oil products to national and international oil companies, major chemical companies, as well as trading and utility companies.

Hafnia is a company that's all about our people both the people that run the business, and those that manage our customers. We've always done things differently and prioritized a strong, commercial mindset. But we've never cut corners when it comes to relationships. Building strong business relationships with our customers is the foundation of what we do. We're in this for the long run and focus on their needs 100%. We are transparent and we stick by our promises as the partner you can turn to in a tight spot meaning our customers stick with us. Our foremost rule is putting people first and that's how we've become one of the leading ship owners and operators of today's product tanker industry globally.

Hafnia has a solid history in chartering, operations, and technical management, and strives to offer customers the best solution for their transportation needs. This solution-focused approach has resulted in a strong reputation and the Company remains firmly committed to being a responsible member of the industry and operating according to the highest ethical standards.

RESPONSIBILITIES

• Manage and oversee the filing of regular tax returns, tax audit / inquiries and notices from tax authorities, GST/VAT and withholding tax
• Lead implementation of Pillar 2 compliance for the Group
• Assist the group to comply with transfer pricing rules and plan comprehensive tax and transfer pricing strategies through the use of Organisation for Economic Cooperation (OECD) guidelines' and Singapore transfer pricing guidelines' methodologies.
• Manage all Singapore GST matters for the group ensuring tax compliance with GST regulations
• Provide advice on all tax matters including day-to-day tax planning and advisory / operational business support, review of commercial contracts and cross-border transactions, tax reporting and tax due diligence.
• Monitor and analyse the impact of proposed and newly enacted tax legislation on the business in the relevant jurisdiction.
• Identify tax efficient opportunities and assist with all aspects of tax strategy management, business acquisition and restructuring initiatives, tax efficient structuring and mitigation of tax risks.
• Support the tax provisioning process for the finance team.

• At least 10 years of relevant experience in corporate and international shipping tax with prior experience in Big 4
• Familiar with Organisation for Economic Co-operation and Development (OECD) and Singapore Transfer Pricing guidelines.
• Degree in Accountancy or its' equivalent or any professional tax qualifications.
• Excellent written and oral communication skills with emphasis on ability to interpret and analyze relevant tax law and summarize findings in non-technical business language for management
• Proficient in use of Excel, Data analytics.
• Self-starter who is able to produce quality results and meet deadlines.

Assist with infrastructure planning and design

• Assist with the planning and design of infrastructure systems
• Assist with the documentation of infrastructure design and planning activities and decisions

Support infrastructure operations

• Perform infrastructure operations activities such as installations of infrastructure systems according to design specifications
• Align infrastructure operations with agreed service agreement standards

Maintain infrastructure

• Perform activities related to ongoing maintenance of infrastructure
• Assist with the implementation of agreed infrastructure changes and maintenance routines

Optimise infrastructure performance

• Perform ongoing tuning and optimisation of infrastructure hardware and software components such as updates and upgrades
• Participate in infrastructure development activities
• Assist with infrastructure testing and implementation
• Gather performance and data usage statistics for capacity planning and reporting
• Assist with piloting of new tools, technologies, and/or processes

Resolve incidents

• Perform problem/issue identification and resolution
• Assist with simulation of user problems to resolve operating difficulties
• Follow up with users to ensure problem has been resolved
• Recommend system modifications to reduce user problems

Requirements

• At least 6 years' of experience in the Network Management and Support Services, Unified Communication, Wirecenter maintenance
• Strong knowledge and experience in supporting Cisco Switch, Cisco Router, Fortigate Firewall, Palo Alto Firewall, ClearPass NAC, F5 VPN, IPS, WLC, Access Point and VSS/VLAN Architectures.
• Network Support in the areas of wireless, wired, VPN
• Network certifications eg CCNE, CCNA

Roles and Responsibility:

• Preparation of Piping Material Specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To calculate/validate pipe wall thickness, branch reinforcement etc.
• To prepare line index, Material summary (BM/BQ).
• To carry out engineering support work during the construction phase of the project.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements:

• Minimum of Ten (10) years in the field of piping engineering involving material, design, production work, 3D model review, stress and construction engineering support.
• Bachelor’s Degree in Mechanical Engineering or equivalent combination of education and experience.
• Good knowledge and experience of ASME, ASTM, BS and other relevant standards.
• Basic knowledge of AutoCAD/AP3D/S3D.
• Basic knowledge of 3D Model review through Navisworks or SPR.
• Strong analytical and reasoning abilities.
• Good leadership skills.
• Good interpersonal and communication skill.

Responsible in the preparation of line index, tie-in list, piping layout and information, loading calculation, MTO sketch, BM/BQ, and 2D/3D CAD modeling of piping system, equipment and structure, interference detection, and model review.

Has the technical responsibility for developing stress/vibration sketch/model, and mechanical data, for interpreting moment, stress, reaction force, and displacement, and for coordination these responsibilities with reports to ensure timely completion that meets project schedule and budget.

Duties & Responsibilities:

• Studies ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan through the guidance of Senior Piping.
• Prepares line index, tie-in list, piping layout, piping information, loading calculation, steam trace layout, MTO sketch, BM/BQ, plan and isometric drawing in compliance with project standards, specifications, contract requirements, and accepted engineering and construction practices.
• Selects line which requires stress/vibration sketch following the criteria set for analysis and evaluation, prepares mechanical data, and performs calculation for initial displacement with assistance of Senior Piping Engineer.
• Assists in developing model for stress/vibration analysis, interprets and evaluates result, and recommends method of resolution to comply with applicable vendor’s allowable or code requirements.
• Performs highly specialised 3D CAD modeling of equipment, structural, and piping system, interference detection, annotation, model review, and plan drawing extraction according to project 3D modelling procedure and by the use of PDS Intergraph or SP3D CAD software.
• Prepares steam trace piping drawings and pipe support drawings in 2D CAD format.
• Assists the Senior Piping Engineers or project Key Person in field survey work to develop conceptual routing, verify tie-in location, and other related activities.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements:

• Bachelor’s Degree in Mechanical or Chemical Engineering with 5 years of experience.
• Training will be provided.
• Ability to use computer equipment and peripherals to carry out routine computing and 2D/3D CAD tasks. Ability to adapt with changes due to upgrading of computer software. Capable to utilize AutoCAD/Cad Pipe /Microstation 2D CAD; PDS Intergraph and SP3D softwares with minimal assistance.
• Ability to apply mathematical concepts in piping calculations such as exponents, logarithms, trigonometric functions, quadratic equations and other applicable formulas.
• Ability to read, analyse and interpret common technical information, reports and instructions. Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communication.
• Strong analytical and reasoning abilities.
• Good interpersonal and communication.

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for Senior UX Designer (Accessibility) as a 2 year contract employee to join us! You will thrive in design sprints and lean UX methodologies as we tackle ambiguous problems and deliver workable prototypes that are executable. You will play a crucial role in ensuring that our products meet and exceed accessibility standards, providing an optimal user experience for everyone, including users with disabilities. You will work alongside with a lean team of designers and engineers from discovery to envisioning activities with a mission to fix user experience problems.

A brief summary of your job responsibility:

Within Your First Month:

• Gain a solid understanding of the project roadmap, team vision, rituals, and design process
• Create user experiences that are accessible to all users, including those with visual, auditory, cognitive, and motor impairments. Ensure designs comply with WCAG (Web Content Accessibility Guidelines) and other relevant accessibility standards
• Independently manage research and design tasks with confidence
• Engage with both external and internal stakeholders, co-facilitating workshops as needed

By the End of 3 Months:

• Propose research and design plans for new projects, becoming deeply involved in all aspects of design work
• Perform regular accessibility audits and usability testing with users of varying abilities to identify and resolve accessibility issues. Ensure continuous compliance with accessibility standards.
• Successfully conclude a project with a convincing presentation and a meticulous handover plan, ensuring continuity of design excellence with A11Y in mind

Beyond That:

• Keep up to date with the latest trends, tools, and regulations in accessibility and inclusive design, ensuring our products remain compliant and innovative
• Document accessibility requirements, patterns, and best practices. Advocate for inclusive design principles across the team and organization
• Work closely with cross-functional teams (designers, developers, product managers) to embed accessibility into the product lifecycle from concept through implementation
• Build and maintain professional relationships with project leads, product owners, and business users to elevate the UX maturity within organizations

To succeed in this role, you will ideally have:

• Proven UX experience with focus on accessibility and inclusive design, including experience in facilitating workshops, gathering requirements, conducting usability testing, envisioning flows, and delivering high-fidelity mockups
• Deep understanding of WCAG 2.1 (Web Content Accessibility Guidelines)
• Experience conducting accessibility testing and audits, using tools such as screen readers, keyboard navigation, and other assistive technologies
• Familiarity with front-end development and understanding of how accessibility impacts code implementation is a plus
• Excellent problem-solving skill in proposing and presenting user-centered design solutions that consider project constraints
• A collaborative mindset, understanding that co-creation with the team and stakeholders leads to the best product outcomes
• Agility to find the quickest route to design, test, and ship a design prototype to validate a concept
• A data-driven approach with experience in qualitative and quantitative user research, using insights to justify design decisions
• Competence in translating user research into actionable design recommendations
• Strong communication and analytical skills

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience.

Interested applicants, please click "Apply Now".

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.
• Contract Staff enjoys the same benefits as Permanent Employees.
  

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for an individual to join us as a Senior Software Engineer (familiar with UX, Accessibility), as a 2 year contract employee. This person will need to have a strong front-end development background and deep knowledge of accessibility (A11Y) standards to join our team.

In this role, you will play a crucial role in ensuring that our web and mobile interfaces meet and exceed accessibility guidelines, enabling users of all abilities to interact seamlessly with our products. You will be at the intersection of design and development, rapidly prototyping and implementing user-centric solutions that are both technically sound and visually compelling. You will collaborate closely with a lean team of designers, speaking their languages fluently to translate design concepts into functional, elegant interfaces that are not only innovative but also optimized for performance.

A brief summary of your job responsibility:

• Develop and implement accessible front-end code that meets WCAG (Web Content Accessibility Guidelines) 2.1 standards and beyond. Ensure accessibility across various platforms and devices, catering to users with visual, auditory, motor, and cognitive disabilities
• Build responsive, high-performance interfaces that are both functional and aesthetically pleasing while keeping accessibility in focus.
• Regularly audit and review the codebase to identify and fix accessibility issues. Use tools like screen readers, keyboard navigation, and assistive technologies to perform manual and automated accessibility testing.
• Collaborate closely with designers to translate their vision into functional code and that accessibility principles are considered from the initial design phase
• Balance design aesthetics with technical feasibility and performance
• Participate in user research and usability testing to inform design decisions
• Act as a bridge between design and development teams, ensuring clear communication and alignment on project goals and deliverables
• Continuously update yourself with the latest trends, tools, and technologies in UX design and frontend development, bringing new ideas and innovations to the team

To succeed in this role, you will ideally have:

• Strong expertise in front-end development with a focus on accessibility, including experience with HTML, CSS, JavaScript, and ARIA
• In-depth knowledge of WCAG 2.1 (Web Content Accessibility Guidelines)
• Proven experience in rapid prototyping and delivering high-fidelity prototypes that can be quickly tested and iterated
• Experience conducting accessibility audits and testing
• Familiar with design principles with the ability to think like a designer when needed, while also being deeply aware of the limitations and opportunities within frontend development
• Familiar with the latest frontend frameworks, systems, and best practices, with a focus on delivering user-centric solutions
• Excellent collaboration skills, with the ability to communicate effectively with both design and development teams
• A user-centric mindset, with a passion for creating products that delight and engage users
• Experience participating in design activities and workshops, contributing to the overall UX vision and strategy
• Strong problem-solving skills, with the ability to navigate complex challenges and propose creative solutions

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions! The remuneration package will commensurate with your qualifications and experience.

Interested applicants, please click "Apply Now".

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.
• Contract Staff enjoys the same benefits as Permanent Employees.
  

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around bringing our robot to market. You may be remunerated with a combination of salary and share options. This internship requires a candidate to have both an engineering background and a reasonable business acumen. Great communications skills are required as we work with many external contract manufacturers.

1. Pushing our product to pilot production (design for manufacturing, design for reliability, design for user-friendliness)
2. Connecting manufacturers and our R&D team to build and iterate on our prototype, creating new avenues for manufacturing at scale, manufacturing for reliability
3. Sourcing for and testing appropriate equipment and materials for R&D
4. Visiting industry trial sites, giving appropriate feedback to product development team
5. Speaking to industry players, ground workers, understanding the process of tile grouting to help us shape our solution, especially from an operational point of view
6. Hiring, recruitment, and outreach
7. Any other operational duties

A great candidate would possess the following:

• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back of the envelope calculations
• Keenness to do more than is expected, impact driven
• Growth mindset driven

Our development process is very iterative and agile. Thus, there would not be a concrete plan more than 2 weeks ahead and your role/tasks is/are likely to evolve over time. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. You would thus play a significant part in deciding how your work would contribute to our overall goals. Please email your resume to [email protected] if you are interested. Thank you

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

1) (Software) Create new data generator for object detection (ideal is some experience with Blender/Unreal/Unity)

2) (Deep Learning and Machine Learning): Train, and evaluate our computer vision model fine-tuned on synthetic data on a real-world test set.

3) (Deep Learning engineering): Go through the list of researched libraries, use them to integrate the model into ROS2, and evaluate (compute) performance. Test performance uplift on low-power DL co-processors.

4) (algorithms) Write an algorithm to turn object detection bounding boxes in pixel space to 3D space using known constraints (baseline algo already researched). Turn it into a ROS2 node.

5) Robotics DevOps & Real World Industry Trials (must be in Singapore)

• Understand the whole project and run our ROS2 stack on real HW.
• Create reproducible testing methodology and evaluate metrics on the HW.
• Be in charge of the robots on the construction site.
• Explore and procure new parts/new materials for robot functionality improvement

A great candidate would possess the following:

• Motivation to build a great product and great codebase using the most recent tech stack for the slowly coming robotics revolution
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back of the envelope calculations
• Keenness to do more than is expected, impact driven
• Excited about robotics and similar technical areas and exploring them in extracurricular projects
• Growth mindset driven

For roles 1-4, can be in person in Singapore and Czechia or remote.

Our development process is very iterative and agile. Thus, there would not be a concrete plan more than 2 weeks ahead and your role/tasks is/are likely to evolve over time. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. You would thus play a significant part in deciding how your work would contribute to our overall goals. Please email your resume to [email protected] if you are interested. Thank you!

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

1. Mechanical experiments and design
   • Experiments - e.g. designing variations to the grout extruder to allow less waste and better reliability
   • Design - e.g. most of the upcoming v4 robot is being designed by interns with Jakub supervising them
2. Mechanical manufacturing, assembly and testing (only for R&D, our manufacturing is outsourced)
   • 3D printing - Slicing prints (often for multi-filament printing), managing and repairing printers (we have Tenlog TL-D3, TL-D5, Ender 3, Prusa i3)
   • Outsourcing manufacturing - specifying cabling, machining etc. to manufacturers
   • Machine tools - making some parts by hand when we need to quickly iterate
   • Assembly - putting in inserts, bolting parts together, waterproofing
   • Testing - testing the robot’s grout extrusion and cleaning, making minor adjustments to make sure everything is running properly and robot produces nice grout lines
3. Electrical experiments and design
   • Design - most of our PCBs have been designed by interns, aiming to minimise free wires in the robot, speed up assembly, allow easy modification where needed. Generally connecting all modules, controlling power, providing a physical user interface…
   • Experiments - e.g. sourcing and testing various motor and driver combinations to pick for our drive system
4. Electrical assembly (only for R&D, our manufacturing is outsourced)
   • Outsourcing production of cable assemblies and PCBs
   • Where necessary to make modifications - soldering PCBs, soldering power cables, crimping cables
5. Embedded programming
   • Writing object oriented C++ code
   • Keeping the code clean and maintainable
6. Robotics DevOps & Real World Industry Trials (expect to be on site 1-2 times a week)
   • Understand the whole project and run our ROS2 stack on real HW.
   • Create reproducible testing methodology and evaluate metrics on the HW.
   • Be in charge of the robots on the construction site.
   • Explore and procure new parts/new materials for robot functionality improvement

A great candidate would possess the following:

• Motivation to build a great product and great codebase using the most recent tech stack for the slowly coming robotics revolution
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back of the envelope calculations
• Keenness to do more than is expected, impact driven
• Excited about robotics and similar technical areas and exploring them in extracurricular projects
• Growth mindset driven

Our development process is very iterative and agile. Thus, there would not be a concrete plan more than 2 weeks ahead and your role/tasks is/are likely to evolve over time. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. You would thus play a significant part in deciding how your work would contribute to our overall goals

Benefits & Highlights:

• Work Style: Hybrid
• Location: Buona Vista
• Great employee benefit
• Weekly office lunches
• Reporting Line: Human Resource Director, APAC

Main Objective:

The Manager, HR Operations will play a pivotal role in overseeing and enhancing HR operations across the APAC region. Reporting to the HR Director, APAC, this position will be responsible for driving HRIS implementation and administration, payroll management, and draft employee handbooks and policies across all APAC locations.

The role will also be responsible for creating standard procedures for the HR department as well as running the annual HR calendar. The successful candidate will demonstrate strong leadership, strategic thinking, and the ability to collaborate effectively across various functions and geographies.

Essential Duties and Responsibilities:-

HRIS Implementation and Administration:

• Lead the implementation of the HRIS systems across APAC, ensuring alignment with global standards and regional requirements.
• Collaborate with IT and HR teams to configure, customize, and optimize HRIS platforms to streamline processes and enhance user experience.
• Provide training and support to HR teams and end-users on HRIS functionalities, ensuring smooth adoption and utilization.

Payroll Management:

• Oversee payroll operations for all APAC locations, ensuring accuracy, timeliness, and compliance with local regulations and company policies.
• Coordinate with finance, HR, and external vendors to process payroll, resolve discrepancies, and implement improvements to payroll processes.
• Stay updated on relevant payroll laws and regulations across APAC countries, ensuring compliance and mitigating risks.

Employee Handbook and Policy Administration:

• Manage the development, review, and dissemination of employee handbooks, policies, and procedures for APAC, ensuring alignment with local laws and company values.
• Work closely with legal and compliance teams to ensure policies are up-to-date and compliant with regulatory requirements.
• Provide guidance and support to HR teams and employees on policy interpretation and implementation.

Compliance and Risk Management:

• Monitor regulatory changes and industry trends related to HRIS, payroll, and employment laws across APAC countries, proactively addressing compliance risks.
• Conduct audits and assessments to ensure data accuracy, security, and confidentiality in HR systems and processes.
• Implement controls and measures to mitigate risks related to data privacy, security breaches, and regulatory non-compliance.

Stakeholder Management and Collaboration:

• Build strong relationships with internal stakeholders, including HR business partners, finance, IT, legal, global HR and external vendors.
• Collaborate with global HR teams to share best practices, leverage synergies, and drive continuous improvement initiatives.
• Serve as a trusted advisor to regional and local leadership on HR operations matters, providing insights and recommendations to support business objectives.

About You :

Summary of Education and Experience:-

• Preferred Education: Bachelor’s degree in HR, Business Administration, or related field.
• Experience: Over 5 years in HR operations, focusing on HRIS implementation, payroll management, and policy administration in the APAC region.
• HRIS Knowledge: Proficient in platforms like Workday, SAP SuccessFactors, and Oracle HCM, with hands-on implementation and configuration experience.
• Employment Laws: Deep understanding of APAC employment laws and regulations, with the ability to apply them in a multinational context.
• Project Management: Strong skills in leading cross-functional projects, managing stakeholders, and delivering results within deadlines and budgets.
• Analytical Skills: Proficient in data analysis and reporting for informed decision-making and process improvement.
• Communication: Effective at influencing and collaborating with diverse stakeholders.
• Leadership: Proven ability to lead and develop HR teams across multiple locations.

Knowledge and skills required :-

HRIS Implementation and Administration:

• Proficient in HRIS platforms (e.g., Workday, SAP SuccessFactors) with system implementation experience.
• Trained in HRIS configuration, customization, and user training.

Payroll Management:

• Expertise in payroll processes, tax regulations, and compliance across APAC countries.
• Trained in payroll software/systems and international payroll practices.

Employment Laws and Compliance:

• In-depth understanding of APAC labor laws and compliance requirements.
• Trained in global HR compliance, data privacy, and regulatory affairs.

Project Management and Process Improvement:

• Certified in project management methodologies (e.g., PMP, Agile).
• Trained in process improvement (e.g., Lean Six Sigma) and change management.

Interested applicants are to send in their application.

Product area

The Data Center team designs and operates some of the most sophisticated electrical and HVAC systems in the world. We are a diverse, upbeat, creative, team-oriented group of engineers committed to building and operating powerful data centers.

Job description

Google isn't just a software company. The Hardware Operations team is responsible for monitoring the state-of-the-art physical infrastructure behind Google's powerful search technology. As an Operations Technician, you'll install, configure, test, troubleshoot and maintain hardware (like servers and its components) and server software (like Google's Linux cluster). You'll also take on the configuration of more complex components such as networks, routers, hubs, bridges, switches and networking protocols. You'll participate in or lead small project teams on larger installations and develop project contingency plans. A typical day involves manual movement and installation of racks, and while it can sometimes be physically demanding, you are excited to work with infrastructure that is at the cutting-edge of computer technology.

Qualifications

Job responsibilities

• Contribute to efforts/projects in the deployment, maintenance, and support of current and new data center infrastructure.
• Learn and apply skills in repairing and troubleshooting different machine platforms.
• Participate in complex troubleshooting and resolve critical technical issues.
• Test and troubleshoot new server and network hardware components and designs.
• Install and maintain switches, routers, and other networking gear. Configure and troubleshoot Linux OS-related issues.

Minimum qualifications

• Bachelor's degree or equivalent practical experience.
• Experience diagnosing and troubleshooting one of the following: operating systems and computer/server hardware or networking protocols.
• Experience Data Centers, Linux, Hardware, Networking, OSI Model, Written Communication, Teamwork, Communication.

Preferred qualifications

• Experience in maintenance of server systems.
• Experience working within a data center or network operation center environment.
• Experience with troubleshooting hardware and network issues using Linux tools.
• Knowledge in Networking, including topology and protocol understanding.

The National University Health System (NUHS) is an integrated Academic Health System and Regional Health System in Singapore that delivers value-driven, innovative and sustainable healthcare. Institutions in the NUHS group include three hospitals – National University Hospital, Ng Teng Fong General Hospital and Jurong Community Hospital; three National Specialty Centres – National University Cancer Institute, Singapore, National University Heart Centre, Singapore and National University Centre for Oral Health, Singapore; a polyclinic group – the National University Polyclinics; one medical centre – Jurong Medical Centre; and three academic health sciences institutions – National University of Singapore (NUS) Yong Loo Lin School of Medicine (including the Alice Lee Centre for Nursing Studies), NUS Faculty of Dentistry and NUS Saw Swee Hock School of Public Health.

The Departments are seeking candidates who are highly motivated and willing to join us for a challenging and fulfilling appointment as Resident Physician / Senior Resident Physician on a contractual basis.

As a Resident Physician, you will be part of the care team led by Senior Consultants/Consultants in the overall supervision and day-to-day running of the wards, including patient care.

You will be required to take on additional duties and responsibilities such as clinical administration. In addition, you shall demonstrate good diagnostic and clinical management acumen and perform any other duties as directed by Head of Department or the Chairman Medical Board of the Hospital.

•Possess a basic medical degree and a postgraduate registrable with the Singapore Medical Council

•Possess a 3 year post housemanship clinical experience

•Be in active clinical practice

•Must be registered with the Singapore Medical Council

•Able to demonstrate good diagnostic and clinical management acumen

•Able to demonstrate teamwork, respect, integrity, compassion and excellence in his/ her work

COMPANY DESCRIPTION

CrimsonLogic, part of the PSA Group, is a global technology company that digitalises and simplifies global trade for businesses and governments around the world through intuitive and delightful solutions.

With over 35 years of experience advancing trade facilitation, compliance, port operations, government services and logistics, we push the boundaries of technology with insightful innovation and deep domain expertise of global trade driven by customer-centricity at our core.

Having pioneered the world's first single-window trade facilitation system, we continue to drive the digital transformation of global trade in over 40 countries with sustainable, impactful solutions for a more seamlessly connected world.

RESPONSIBILITIES

• Role Purpose(s)

  This individual will perform the role of level 2 security analyst in a 24x7 Security Operations Center responsible for monitoring the environment for potential security threats and incidents. This will include the identification, triaging, analysis, threat-hunting, lead incident investigation and support of remediation recommendations to mitigate the security threats and incidents.

  Key Accountabilities

  • Monitors, analyzes and responds to security events in timely manner

  Job Responsibilities & Duties

  • Using security tools, perform monitoring and analysis of security events of interest to detect security risks and threats.
  • Create incidents and support the investigation of such incidents to not only mitigate the current threat but also prevent future occurrence.
  • Document all actions taken as part of incident investigation.
  • Work closely with other teams to support the incident management process.
  • Provide tuning and filtering recommendations to engineering team.
  • Conduct investigation upon requests for data by the customer and/or other teams.
  • Assist with the identification, creation and refinement of the team's processes and procedures.
  • Stay abreast of current threats and vulnerabilities, particularly those that may directly impact the customer.
  • Conduct hunts (specialized searches) for evidence of compromise
  • Tracking suspicious network, application, and user behavior
  • Investigating breaches, gathering evidence, and analyzing data
  • Support and guide Junior analysts and engineers on investigation as required.

  Key Job Competencies

  • Good analytical Skills
  • Result oriented
  • Good communication skills
  • Teamwork

  Education Requirements

  • Bachelor's degree or equivalent experience in a related field with 3 working years experience
  • GCIA, GCIH or equivalent

  Working Experience Requirements

  • Bachelor's degree or equivalent experience in a related field with 3 working years experience

  Skills Required

  • Prior experience in an operations environment as a security analyst
  • Highly independent with robust analytical skills
  • Incident Response Experience with Remediation
  • Basic OS and SIEM administration experiences
  • Programming language : KQL, Regex

• Bachelor's degree or equivalent experience in a related field with 3 working years experience

Job Description:

As an academic health system, our combined resources allow you to leverage on our clinical excellence, research and education aspects of each institution in your pursuit of professional knowledge and expertise. You may from time to time be deployed to other institutions within of NUHS.

We are seeking candidates who are highly motivated and willing to join us for a challenging and fulfilling appointment as our specialist doctors.

As Consultant, you will be required to carry out the duties as directed by the Group/Chairman, Medical Board, Group Chief, Head of Department in accordance with the policies and guidelines set by the NUHS and the Ministry of Health (MOH).

Requirements:

· Possess a basic degree from a recognised medical school or Postgraduate which is registrable with the Singapore Medical Council;

· Completed the training and post-graduate qualifications which are recognised by the Specialists Accreditation Board (SAB);

· Active in clinical practice;

· Have at least 3 years of relevant experience as an accredited and licensed medical specialist;

· Able to work independently with demonstrated competence in managing patients, teaching and research in a multi-discipline environment;

· Confident, takes initiatives and a good team player.

Role and Duties:

· Handling of AR & AP (Trade and non-trade payments)

· SAP AP Journals posting and Partial General Journals posting

· Preparation of fund forecast statements

· Preparation of schedules and liaison with tax agents on corporate tax

· Preparation and submission of GST Return

· Liaise with Corporate Secretary on all matters arises

· Liaise with Bankers on all matters arises

· Preparation of audit schedules and liaise with external auditors on audit work

· Preparation of additional analyses and reports as requested by management

· Collaboration with all departments

· Might be needed to handle some administrative work (80% finance, 20% admin)

· Perform and assistance the management on any other ad-hoc duties assigned from time to time

Requirements:

· Candidate must possess at least Bachelor's Degree/ Post Graduate Diploma/ Professional Degree in Finance/Accountancy/Banking or equivalent with minimum 3 Year(s) of accounting experience handling full set of accounts is required

· Familiar with IFRS and Singapore Tax

· Proficient in Microsoft Office and knowledge of accounting software (SAP) will be an advantage

· Meticulous, eye for details, precise, organise and efficient

· Resourceful with good logical and analytical thinking skills

· Team-player, service-orientated, forward-looking, independent, energetic and proactive

· Proficient in both English and Mandarin (speaking and writing) is required for effective daily communication with our Shanghai HQ team.

Position Details:

Location: One-north, Queenstown

Working Hours: Monday to Friday 8.00am-5.00pm

Job Responsibilities

• Responsible in teaching a small group size class
• Planning and developing of teaching resources
• Marking of assignments
• Coaching and mentoring students through individualised teaching method
• Effectively manage students in the classroom
• Managing students’ portfolio and academic evaluation
• Establishing rapport with both students and parents, and communicating with parents on students’ academic progress
• Applicants who have experience working in Singapore or studied in Singapore will have an added advantage

Job Requirements

• A recognised Mathematics or Science-related degree is preferred
• Great interpersonal skills
• Passionate about coaching and teaching
• Able to articulate concepts and ideas both verbally and in writing in a clear and concise manner
• Strong work ethics
• A strong innate desire to motivate, nurture and inspire students to maximise their potential
• Candidates with a minimum of 3 years teaching experience (for added advantage)
• Able to work on weekends
• Familiar with Singapore's curriculum

Job Benefits

• Attractive salary package
• Small classroom ratio (4-6 students per class)
• Progression of career prospect
• Shorter than normal office working hours
• Flexibility in working hours
• Medical benefits, Annual Leave

Regional Business & Market Analyst

Samsung Asia Pte Ltd

As a Regional Business and Market Analyst, you will work alongside the regional business units of Samsung Electronics' Southeast Asia & Oceania (SEAO) to analyze, coordinate and follow through on business operational matters. You will collaborate with members from diverse backgrounds on various projects which require understanding of complex business problems from different perspectives.

• Work together with local/regional teams to gather data and conduct analysis supporting hypotheses that will support executive team discussions and generate actionable insights
• Prioritize objectives and contribute to project planning and status reporting
• Analyze financial data, identify trends, highlight risks and opportunities, and provide actionable insights to leadership to support strategic decision-making
• Perform key analysis on financial performance of business segment and operation statistics at a regional level
• Conduct in-depth market research to understand industry trends & competitive landscape
• Prepare clear, visually engaging reports and presentations for executive leadership, translating complex data into compelling narratives
• Drive discussions and provide financial recommendations to SEAO and its regional business units to deliver growth and profitability

Requirements:

• Bachelor's Degree in Business, Finance, Statistics, or a related field.
• 5 to 8 years of experience in finance & accounting, consulting, analytics, or a related function
• Strong expertise in financial analysis with quantitative and analytical competency
• Strong research/analysis experience and abilities, including excellent Microsoft Office skills
• Experience with spreadsheet software, SQL, Python or similar tools, and data analysis
• Excellent communication and interpersonal skills
• Ability to work in a fast-paced, high-pressure environment
• Ability to work creatively, analytically, independently, and effectively
• Experience in analyzing and providing insights on businesses across diverse markets

Position:

Regional Senior Media Manager, APAC

Reporting to:

Account Director

Office location:

Alice @Mediapolis, 29 Media Circle

Reporting Structure:

You are expected to manage your team (Senior Planners / Planners / Executives) that are being deployed in your business.

The role:

As a Senior Media Manager at our agency, you will play a pivotal role in shaping and executing media marketing strategies for our biggest client, a leading automotive brand, across the APAC region.

You will lead a team of talented professionals and work closely with clients to achieve their marketing objectives.

This role requires a deep understanding of media channels, excellent leadership skills, strategic thinking, and a passion for staying ahead of industry trends.

Responsibilities:

Client Relationship Management:

· Build and maintain strong client relationships, acting as the main point of contact.

· Understand clients' business goals and translate them into effective media strategies.

· Provide strategic recommendations and insights to clients to optimize their marketing efforts.

Team Leadership and Development:

· Lead and mentor a team of media professionals.

· Foster a collaborative and innovative work environment, promoting the growth and development of team members.

· Set clear objectives, provide constructive feedback, and conduct performance evaluations.

Strategy Development:

· Develop and execute comprehensive media strategies that align with clients' objectives.

· Oversee the planning and implementation of digital campaigns across various channels, including Paid Search, Programmatic, Social Media.

Data Analysis and Reporting:

· Utilize data analytics tools to measure the effectiveness of campaigns and provide actionable insights for optimization.

· Prepare and present regular reports to clients, highlighting key performance indicators and recommendations for improvement.

Budget Management:

· Manage media budgets effectively, ensuring efficient allocation of resources to maximize ROI.

· Monitor campaign spend and adjust strategies as needed to stay within budget constraints.

Stay Informed on Industry Trends:

· Keep abreast of emerging trends, technologies, and best practices in media industry.

· Apply industry knowledge to enhance clients' media strategies and maintain a competitive edge.

Process/Strategy

- Be our biddable media platform planning & activation expert (eg Google Ads, DV360, Facebook/IG, TikTok).

- Improve the current workflow & optimization processes.

- Work as both a leader and hands-on expert to assist junior team members with delivering results for clients.

Experience required:

· Minimum 6 years of work experience in a digital media and client servicing role.

· Strong technical understanding of Google Ads, Social, Programmatic planning, and implementation.

· Integrated media planning knowledge would be an added advantage (OOH, Radio, TV, etc.).

· Strong communicator - possesses excellent verbal, written and presentation skills.

· Be a proactive self-starter and ability to handle multiple tasks in a fast-paced environment under tight deadlines.

· Team leadership and mentoring experience.

· Have strong organizational skills being able to manage multiple clients / projects at once.

· Be confident in analysing and acting on marketing data.