• Responsible for all on-site technical and engineering matters
• Ensuring works carried out meet company's quality standards &contractual requirements
• Involved in project planning, monitoring project progress and schedule
• To co-ordinate with the client, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Assisting Project Manager in monthly progress claims and monthly progress reports.
• Ensuring supervisors & foremen meets client &regulatory work requirements.
• Ensuring Environmental, Safety and Health practices are carried out at all times.

Job Requirements

• Min 3 years in precast work planning, coordination is a must.
• Degree in Civil or Structural Engineering recognized by Professional Engineers Board Singapore or Building Construction Authority Singapore is a must.
• Min 3-5 years of Civil Engineering Experience
• Required skill(s): Precast will be preferred.
• Proficient in Microsoft Office
• Organised, meticulous with positive work attitude
• Good interpersonal and analytical skills
• BCSS or equivalent
• Able to start work on short notice
• Candidates will also be considered for Project Engineer (Planning- Civil Engineering) position based on education level and working experience.

Join Our Team at the School of Physical and Mathematical Sciences, Nanyang Technological University, Singapore

The School of Physical and Mathematical Sciences (SPMS) at NTU Singapore hosts research and education activities in two divisions: Division of Mathematical Sciences (MAS) and Division of Physics and Applied Physics (PAP). MAS covers diverse topics ranging from pure mathematics to the applications of mathematics in cryptography, computing, business, and finance. PAP covers many areas of fundamental and applied physics, including quantum information, condensed matter physics, biophysics, and photonics. Over the years, SPMS has attracted talented individuals from around the world and Singapore to join as scientific leaders and researchers.

Key Responsibilities:

• To develop and setup the technique fs laser direct-write and optical cavity integration.
• To setup and align optical beamlines/setups for home-built micro-transient optical spectroscopy experiments.
• To conduct micro-transient absorption spectroscopy studies on the measurements of carrier diffusion length.
• To perform data analysis and data interpretation of micro-transient optical spectroscopy experiments independently.
• To assist the principal investigator with the writing of research papers.

Job Requirements:

• Candidate must possess at least a Master Degree in Physics or Chemistry or Chemical Sciences.
• In addition to Master degree, candidate must possess at least a BSc 1st Class/2nd Class Upper Honours Degree in Physics or Chemistry or Chemical Sciences or nanomaterials and nanotechnology.
• Candidate will be tasked to prepare perovskite nanomaterials and conduct ultrafast optical spectroscopy studies on them.
• He/She is also required to perform data analysis and data interpretation.
• Excellent knowledge in chemical synthesis, optics, photophysics of semiconductors, charge and quasi-particle dynamics, charge transfer mechanisms, femtosecond lasers, and femtosecond laser spectroscopy is essential. A written and oral test of the candidate’s technical competency of femtosecond lasers, photophysics concepts, and ultrafast optical spectroscopy basics will be conducted during the interview.
• Excellent knowledge in the optical characterization of semiconductor materials (including nanostructures) which includes transient spectroscopy (pump-probe, time-resolved PL), and material characterizations (XRD, AFM, GIWAXS/GISAXS).
• Critical Requirement: Candidate must have a Minimum 3 Years of Research Experience in Ultrafast Lasers and Ultrafast Laser Spectroscopy of semiconductor materials.
• Critical Requirement: Candidate must also have a Minimum 3 Years of Research Experience in the study of photophysics in semiconductor systems.

The College of Science seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

We regret to inform that only shortlisted candidates will be notified.

Plan, organize, and lead a team of discipline engineers and staff to plan and execute maintenance operations to ensure the continuous, reliable and efficient functioning of refinery assets, equipment and infrastructure. The purpose of this role is to minimize downtime, maximize operational reliability and ensure safety and compliance with regulatory standards.

Nanyang Technological University (NTU Singapore) invites applications for a Professor (Tenured) / Associate Professor (Tenured) in Power Engineering

Professor (Tenured) / Associate Professor (Tenured) in “Power Engineering”

Established in 1981, the School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University, Singapore. Built on a culture of excellence, the School is renowned for its high academic standards and research. To support advanced research, the School hosts 13 research centres and facilities which are well-equipped with sophisticated and state-of-the-art equipment. Besides the 13 centres, there are more than 50 laboratories, supporting both the teaching and research activities in the School.

Join the School of Electrical and Electronic Engineering of the College of Engineering, Nanyang Technological University, Singapore as a faculty member and embark on a challenging and exciting career in research innovations and teaching excellence, so as to prepare engineering leaders of the future.

Responsibilities

The candidate is expected to possess an international reputation as a technological leader in power engineering which includes but is not limited to Power Systems, Renewable Energy Systems, Smart Grid, Electric Energy Storage Systems, Power Electronics & Energy Conversion, etc. Candidates should have an excellent record of distinguished academic and scholarly achievements, along with a demonstrated commitment to the core traditions of excellence and innovation. Upon the appointment, the job holder is expected to play a leading role in the area of power engineering for NTU’s School of EEE so as to grow new capabilities, nurture innovative ideas and develop strategies to secure external resources for power engineering projects on a sustainable basis. The job holder is expected to demonstrate academic and research leadership and contribute to the nurturing of young researchers in power engineering and the broader area of Electrical and Electronic Engineering.

The selected candidate will also be expected to work closely with NTU’s industry partners in developing capability aligned with the technology needs of the companies in the area of power engineering.

Requirements

Candidates with the following qualifications are encouraged to apply:

• A relevant PhD from a reputable university
• Extensive research and teaching experience in power engineering (for tenured appointment)
• Successful track record of academic/research leadership and team building
• Experience in cross-disciplinary research initiatives and collaboration
• Well-developed understanding of the priorities, operation and strategies of relevant funding bodies
• History of successful training and development of early career researchers and/or PhD students
• Strong network and ties with renowned international entities and organisations
• Internationally acclaimed with presentations such as keynote addresses at flagship conferences and prestigious journal publications.

Application

Applicants are invited to submit their applications (cover letter, CV, research and teaching statements, and citation report, where applicable) through the NTU career portal.

Review of applications and shortlisting decision will be on an on-going basis until the position is filled. Only shortlisted candidates will be notified.

Responsibilities:

1. Installing wooden structures such as backdrop, roofing frames, rafters, partitions, joists, and stud work

2. Installing cabinets, shelving, fitted furniture, drywall, and insulation

3. Adding fixtures and fittings such as door handles, locks, hinges, and closure

4. Selecting lumber by size and strength to suit each job, sourcing wood to suit the customer's budget and style

5. Reading blueprints and designs to work to specifications prepared by other event designers, construction professionals, architects, and building code recommendations.

Requirements:

1. Experience in using hand and power tools such as drills, chisel, sanders, saws, and nail guns

2. Joinery and cabinet making skills

3. Knowledge of building regulations and codes to be adhered to

4. Able to work for long hours period or night shift

5. At least 5 years experience

• Monitor daily food preparation
• Resolves issues in a tactful way.
• Assist in bi-monthly stock take and ensure quality and account for each delivered item
• Mentor kitchen team on maintaining recipe, cooking and preparation procedures & standards
• Perform routine inspection and evaluation of work station; including food presentation, quality, food hygiene, kitchen cleanliness and safety
• Conduct orientation, training for new trainees
• Adhere to company’s standard operating procedures
• Any other appropriate duties and responsibilities as assigned
• Able to work night shift and split shift
• Able to do OT on weekends and public holiday

Requirements

• Minimum 3 years of relevant experience in F&B industry
• Have good product knowledge on food items
• Candidate must possess basic computer knowledge and strict sense of hygiene and safety standards
• Excellent organizational skills and communication skills
• Must be able to work night shift and split shift
• Must be able to work extra hours or weekend if needed.

Responsibilites:

Prepare invoces and support for accounts department

Keep track of stock and maintenance record

Response to Phone call and Emails

Filing of Expenses and invoices

Requirement:

Organised, positive working attitude and able to work independently

Able to communicate in English and Mandarin

Candidates without experience are welcome to apply

Willing to learn

Working Hour :

Monday to Friday : 0900Hrs - 1800 Hrs

Saturday : 0900Hrs - 1200Hrs

Responsibilities

1. Work effectively with Operations and Maintenance staff from the Lines as well as other engineering departments to investigate defects. To develop methods, propose modifications and improve maintenance strategies to rectify them.

2. Analyze and trend condition monitoring and defect data to identify reliability concerns. To develop methods, propose modifications and improve maintenance strategies to overcome them.

3. Draft technical work instructions for preventive and corrective maintenance activities.

4. Identify and implement cost-effective technologies to enhance the RTS Signaling, Communication & Control System performance.

5. Support LTA and RTSO projects in reviewing project design specifications and ensure their adequacy for the safety, reliability, maintainability and operability. To provide

other engineering support to the projects, as required.

6. Work in STRC Tuas, Singapore

Qualifications & Work Experience

1. Degree in Electrical & Electronics Engineering or equivalent from recognized institution

2. Previous Railway System experience would be advantageous

Job Description:

Position Overview: The ICP-MS (Inductively Coupled Plasma Mass Spectrometry) Analyst is responsible for operating and maintaining ICP-MS equipment to conduct analytical testing and ensure the accurate and precise analysis of samples for a variety of applications, including environmental, pharmaceutical, food safety, and industrial sectors. This role involves sample preparation, data analysis, calibration, troubleshooting, and reporting results. The ICP-MS Analyst plays a critical role in ensuring high-quality testing and compliance with regulatory standards.

Key Responsibilities:

• Method preparation for Semiconductor trace metal analysis to ppb level
• Operate and maintain the ICP-MS instrument, ensuring it is calibrated, cleaned and functioning properly.
• Perform routine maintenance, troubleshooting, and minor repairs to ensure optimum equipment performance.
• Prepare and calibrate the ICP-MS system for different sample types and analyz results with high precision.
• Prepare a variety of sample matrices (water, soil, air, Chemicals, Metal & alloys etc.) for ICP-MS analysis by proper digestion, dilution, or other pre-treatment techniques.
• Perform multi-element analysis and determine concentrations of metals and other elements in complex samples.
• Analyze results using ICP-MS data analysis software, ensuring data quality and integrity.
• Interpret analytical data and prepare detailed reports, ensuring clear presentation of results, deviations, and conclusions.
• Ensure proper documentation of all analyses in compliance with quality assurance standards and regulatory requirements.
• Conduct regular quality control checks to ensure the accuracy, precision, and reliability of analytical results.
• Implement and follow standard operating procedures (SOPs) for sample handling, analysis, and reporting.
• Identify and resolve any anomalies in data or equipment performance.
• Collaborate with colleagues, scientists, and other departments to discuss results and support research, product development, and quality assurance efforts.
• Suggest improvements to laboratory processes, equipment, and techniques to increase efficiency, productivity, and data quality.

Qualifications:

• Education: Master's degree in Chemistry, Environmental Science, Analytical Chemistry, or a related field.
• Experience:
  • Minimum of 5 years of hands-on experience in ICP-MS analysis or a related analytical laboratory setting.
  • Experience in sample preparation, method development, and calibration for ICP-MS is highly desirable.
  • Familiarity with quality control procedures and data management systems.

Technical Skills:

• Strong knowledge of ICP-MS theory, techniques, and applications.
• Proficiency in the use of laboratory software for data acquisition, analysis, and reporting.
• Familiarity with laboratory instruments, safety protocols, and analytical equipment.
• Knowledge of good laboratory practices (GLP) and regulatory guidelines (e.g., EPA, FDA, SEMI).
• Experience with troubleshooting and maintaining ICP-MS instrumentation.

Skills & Competencies:

• Excellent attention to detail and ability to work with complex analytical instruments.
• Strong analytical and problem-solving skills.
• Good organizational skills with the ability to manage multiple samples and tasks.

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Create and manage digital marketing strategies to drive leads and enhance online presence.
• Track, measure, and report digital campaign performance against ROI goals.
• Create and adapt Chinese-to-English content for various formats, tones, and channels, collaborating with teams for appropriate assets.
• Contribute to product positioning, marketing strategy, and product naming.
• Manage social media accounts for example, Instagram, Facebook, TikTok, YouTube to boost brand awareness and engagement.
• Update marketing materials, maintain content databases, and collaborate with regional marketing teams.

Requirements:

• Degree in Marketing/Communications or equivalents.
• Interest in skin care, wellness and healthcare products.

________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Ideate, prioritize, and define requirements based on market and customer insights.
• Analyze trends, assess technology, and generate product concepts.
• Define competitive positioning and USP.
• Execute NPD plan within timelines, aligning Scrum teams via Agile.
• Source manufacturers, liaise with formulators, and ensure regulatory compliance.
• Conduct efficacy, safety, and stability tests with manufacturers.
• Finalize product specs, labels, and packaging with relevant teams.
• Research pricing, create costing data, and present to management.
• Provide technical support to Marketing and conduct product training.
• Monitor industry trends, competitor actions, and product performance.
• Manage product improvements and corrective actions with manufacturers.
• Ensure compliance with standards and support company goals with additional projects.

Requirements:

• Degree in Nutrition/ Chemistry/Pharmacy or equivalents.
• Minimum 1 year of experience in product development or management within dietary supplements or health food.
• Proficient in product/project management, with strong planning and time management skills.
• Resourceful, analytical, and effective at problem-solving.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Position Summary

• Ensure that all inspections comply with construction standards, approved procedures and drawings, client specifications, as well as class rules, codes, and regulations (AWS D1.1)
• Serve as the primary contact and advocate for the PaxOcean Quality Assurance Department, prioritizing all structural quality-related issues and any additional responsibilities assigned by the QA Head.
• Collaborate with colleagues within the QA Department and production teams to enhance quality execution through improved coordination.

Tasks and Responsibility

• Carry out Survey and Inspection on jobs in Ship Building / Ship Repair, Module, and Ship Conversion QC-related activity, as per Quality standards as per Surveyor and Client requirements on schedule time.
• To check all the Material verification.
• Prefabrication of Hull panels, assemblies, and units to blocks about approved drawings.
• Co-ordination between different engineering and Quality Assurance sections for resolving engineering and other quality & interdisciplinary checks.
• Checking the plate fit-ups of assemblies and units before final welding.
• Involved with the erection of structures from the entire assembly to the final block stage.
• Checking proper alignment of units/blocks using water tube checks & plumb checks.
• Welding consumable Quality Control.
• Sorting out all documents, related to each project and verifying production documents.
• Review Inspection & test plans by international codes and Client Specification Review Project Weld drawing, weld, and NDT map and welding Procedure Specification
• Oversee various tests, including air leak tests, hydrostatic tests, vacuum tests, hydraulic oil flushing, structural load tests, and hose tests
• Well-versed in monitoring preheating and post-weld heat treatment for welding joints by WPS and codes, particularly for structural and high-pressure pipe welding
• Perform Surveillance during inspection to verify compliance with specified yard procedures including preheat, inter-pass temperature control, and post-heat requirements
• Liaise with NDT team for NDT activities and verify reports
• Prepare the final documentation to ensure compliance with specifications and contract requirements

Job Requirements

• Minimum 5 years of experience in relevant field
• Experience in any degree/diploma
• CSWIP 3.1 and NDT Level-II certification

Lee Kong Chian School of Medicine (LKCMedicine) is recruiting a Research Fellow specialising in the field of digital health and health education in Professor Jennifer Cleland’s group. LKCMedicine is a joint medical school between Nanyang Technological University (NTU) and Imperial College London.

As a Research Fellow, you will play a pivotal role bringing expertise in digital health and health education, working closely under the guidance of Professor Cleland. The role involves providing crucial support to Professor Cleland, who leads the World Health Organization Collaborating Center (WHOCC) for Digital Health and Health Education. The role will involve conducting evidence synthesis using various methods (quantitative, qualitative, mixed methods) for systematic reviews. The applicant will collaborate with a multidisciplinary team of systematic reviewers to evaluate evidence on digital health and health education topics. The impact of your contribution will directly contribute to the field of digital health and health education at the regional and international platforms.

Key Responsibilities:

• Perform extensive review for various types of deliverables (e.g., policy briefs, white papers, background papers, technical briefs, research protocols, peer-reviewed publications) on a wide range of digital heath and health education policy topics.
• Search and assess potential sources of qualitative and quantitative data, evidence, and information that are suitable for addressing project questions and objectives.
• Analyse and interpret data from diverse sources.
• Simplify and communicate complex information from various inputs into clear and accessible written materials for different audiences.
• Prepare written and/or oral reports and analyses to present findings.
• Produce high-quality written work products and deliverables.
• Organise, implement, and coordinate activities to execute assigned tasks and projects.
• Coordinate project activities and logistics with stakeholders, industry representatives, and policy professionals as needed to support project execution, data collection, and/or dissemination of results.
• Prepare internal briefing and or meeting materials on assigned projects.
• Support Principal Investigator in drafting presentations, speaking points, and visualisation aids.
• Foster strong and supportive working relationships across the project team(s) and Centre.

Key Competencies and Requirements:

• PhD in Health Policy, Public Health, Public Administration, Epidemiology, Nursing, Biostatistics, Social Sciences or a related discipline.
• Proficiency in medical terminology, evidence-based medicine and the utilisation of epidemiologic principles in guideline formulation.
• Background in crafting and executing diverse types of evidence synthesis, encompassing scoping reviews, systematic reviews, integrative reviews, etc.
• Proven track record in peer-reviewed publications, with experience as lead/first author.
• Demonstrated success of project implementation and management.
• Experience in research grant application, grant reporting, and research agreements management.
• Experience in supervising for junior researchers and/or students.
• Strong ability to integrate knowledge from diverse disciplines for comprehensive evidence synthesis.
• Effective verbal and written communication skills, especially in translating complex findings for varied audiences.
• Organised, detail-oriented, meticulous, and proficient in handling data.
• Responsible and takes ownership of assigned tasks.
• Proficient in ensuring adherence to institutional guidelines, policies and regulatory requirements throughout project lifecycle.
• Highly motivated and able to work independently, as well as collaboratively in a diverse and interdisciplinary team.
• Effective computer and technology literacy.
• A willingness to take new projects as they arise.

The National Institute of Education invites suitable applications for the position of Research Associate on a 12-month contract, with the possibility of renewal, at the Centre of Research in Pedagogy & Practice, Office of Education Research.

Project Title: Data and Theory Driven Artificial Intelligence to Boost the Science of Learning

Project Introduction: This project will leverage big data generated from online education platform approaches to build Science of Learning for effective education. The project will focus on: (1) current trends and advancements for the role of Artificial Intelligence (AI) in Education, including Generative AI, (2) implementing experimental studies for teaching and learning for mathematics with AI in primary schools, and (3) publishing research findings for different stakeholders including researchers, policymakers and teachers.

Requirements:

• Academic qualification: a Master degree in Data Science, Psychology, Education, Social Sciences or related field. Candidates with a PhD may be considered for a Research Fellow position.
• Work experience: Preferably with experience in social science or education research
• Desirable interests, skills, and attributes:Learning analytics, conversational analysis and/or dialogical learning/pedagogy
  Expertise in educational technology
  Proactive, eager to learn and perform
  Good self-management skills for task structure and management to achieve given goals and objectives
  Experience in Artificial Intelligence and machine learning
  Candidates with knowledge and skills in systematic review are welcome to apply
  

Responsibilities:

• Co-design and develop experimental research that aligns with the project needs and requirements
• Research and devise appropriate learning analytics/conversational analysis tools for data analysis
• Collaborate with internal and external stakeholders to understand analytic needs and devise possible solutions
• Communicate research implications of data to various stakeholders, i.e., researchers, policymakers, educators, etc.

Application

Applicants (external and internal) will apply via Workday. We regret that only shortlisted candidates will be notified.

Workday Job Requisition ID: R00017839

(https://ntu.wd3.myworkdayjobs.com/Careers/job/NTU-Main-Campus-Singapore/Research-Associate--Office-of-Education-Research---NIE-_R00017839)

Closing Date

Closing date for advertisements will be set to 14 calendar days from date of posting.

General Overview

This position reports to Supervisor (Marine Operations) and assisting him/her in ensuring safe, reliable and efficient ship-shore operations, inclusive of interfaces activities for JTJ, STS & FSRU and FSU services.

The incumbent will oversee the maintenance of marine equipment, monitoring the contractors appointed for marine activities and screen LNG ship for SLNG’s acceptance prior to ship arrival.

The incumbent shall also undertake the Loading Master function as required.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to the following responsibilities:

• Responsible in preparing vessels berthing schedule & plans and communicate with all interested parties involved for ship-shore operations.
• Act as Loading Master (Terminal representative onboard vessels), and responsible for ensuring safe berthing and smooth cargo transfer operations.
• Ensure documents between ship-shore including LNG surveyor’s reports are accurate and consistent as per the procedures.
• Be part of the terminal’s emergency response member as dictated by Terminal’s Emergency Response Plan.
• Assist in ensuring maintenances for marine equipment are completed in timely manner.
• Assist in review maintenance and service contracts, and they were executed safely and diligently.
• Complete the compatibility and acceptance review of all prospective vessels as per SLNG’s procedures / checklist.
• Track and replenish consumable items for jetty operations.
• Prepare routine updates, reports and statistics of ship-shore operations.
• Comply to document control process for the marine operations.
• Track vessels and customers feedbacks, complaints, letter of protest. Support in closure actions as necessary.
• Take an active role in HSSE activities, capability development, productivity and efficiency objectives.
• Take on additional tasks as directed by Supervisor.

Work experience / Knowledge

• At least 2 years working experience on tanker vessels as an Officer involves in navigations, maintenance and cargo operations
• Candidate who has previously worked on similar role in Oil and Gas Terminals, Shipping and/or Marine Industry with 5 years working experience can be considered.
• Knowledge on ship shore interface, effective mooring, LNG transfer, cargo documentations and safe practices in Marine, Oil & Gas industries.
• General knowledge of international organization such as OCIMF, SIGTTO etc.

Education / Qualification

• Certificate of Competency (CoC) as watch keeping officer from reputable Flag State.
• In lieu of CoC, Diploma in Maritime or Shipping related studies can be considered.
• Good written and spoken English;
• Good level of IT understanding;

• 1) Locating prospective customers, generating them into leads, and eventually converting them to customersTo make appointments with various sectors customers
• Presenting, promoting and selling products/services to existing and prospective customers
• Establishing, developing and maintaining positive business and customer relationships
• Reaching out to customer leads through cold calling
• Meeting or exceeding weekly, monthly, and quarterly sales quotas

• Set up the kitchen with cooking utensils and equipment, like knives, pans and kitchen scales
• Study each recipe and gather all necessary ingredients
• Cook food in a timely manner
• Delegate tasks to kitchen staff
• Inform wait staff about daily specials
• Ensure appealing plate presentation
• Supervise Cooks and assist as needed
• Slightly modify recipes to meet customers’ needs and requests (e.g. reduce salt, remove dairy)
• Monitor food stock and place orders
• Check freshness of food and discard out-of-date items
• Experiment with recipes and suggest new ingredients
• Ensure compliance with all health and safety regulations within the kitchen area

Duration: 1 year contract
Salary Range: $5,500 - 6,500/month
Location: Bukit Merah

Job responsibilities:

• Propose and design solutions to meet business needs using the Outsystems Rapid Application Development platform
• Responsible for the design, development and implementation of all integration points and interfaces with SAP, any selected 3rd party software and other applications/ systems
• Conduct workshops and facilitate group discussions for requirement gathering, design and solutioning
• Plan, identify, define and conduct System Integration Test and User Acceptance
• Test to ensure the proposed solution fulfil the business requirements
• Plan and define the data migration requirements as well as oversee the successful completion of the data migration activities to enable system implementation
• Plan and prepare the training materials as well as to conduct the user training
• Deliver all project documentation
• Provide on-site support where necessary
• Troubleshoot any problems reported before and after implementation of solution
• Participate in any quality assurance activities and resolve any risks or areas for improvement identified
• Perform risk management
• Manage and resolve all problems reported and service requests received during the maintenance phase

Requirements:

• Degree in Computer Science, Engineering or Equivalent
• Minimum 4 years of IT system implementation experience with at least 2 full cycle implementations as a Team Lead
• Minimum 2 years experience as Business Analyst is required
• Good communication skills
• Team player

VikConnect Pte Ltd | UEN: 200804439G | EA Licence No: 09C5380 | Reg No: R1877979 (Tey Wan Xuan)

• Location: Near Joo Koon MRT

• 5-day work week (Mondays to Fridays : 6.45am to 4.30pm)

Designated pick up points available.

Key Responsibilities:

To support Senior Planning Officer to ensuring efficient production operations, maintaining inventory levels, and meeting customer demands.

Job Description:

~ Production Scheduling: -

Develop and maintain production schedules to ensure the timely manufacturing of metal cans.

Planning one of the production schedule.

Issue Job Order and Printing of Labels

~ Coordinate with various departments to align production activities with overall business goals:

~ Order Processing & Update of Documentation into ERP system

Job Requirement:

GCE O level / Diploma with related work experience an advantage or with administrative role.

Good organisational & time-management skills

Attention to detail

Proficiency in using office Software(Microsoft Office)

Ability to identify issues and develop effective solutions

Ability to interact and work effectively within a team.

REQUIREMENTS:

• Diploma in Accounting or equivalent
• Knowledgeable or with experience in Oracle Netsuite system is an advantage

ROLES & RESPONSIBILITIES

• Accounts Payable functions include verifying supplier’s invoices, initiating payments, data entry and maintenance & reconciliation of creditors’ ledger.
• Accounts Receivables function include AR aging, prepare AR reports & monitor cash balance.
• Handle petty cash claims and reimbursement.
• Monthly bank and accounts reconciliation.
• Handling staff claims.
• GST returns and ensure all transactions comply with IRAS’s regulations.
• Liaise with auditors and preparing audit schedules.
• Undertake instructions from Directors and Managers for the transactions & assignments given.
• Manage full sets of accounts and ensure timely & accurate month end closing.
• Perform any other ad hoc duties as and when assigned by the Management.

WORKING SCHEDULE

Monday to Friday - 9:00am to 6:00pm

alternate Saturday - 9:00am to 6:00pm

Responsibilities:

• Responsible for safe operation and maintenance of electrical and mechanical equipments.
• Responsible to carry out preventive maintenance works, troubleshooting and repairing works at plant machineries.
• Assist supervisor on general duties and maintaining equipment and premises cleanliness.

Requirements:

• Minimum ITE qualification in electrical engineering.
• 3-5 years maintenance experience at manufacturing, industrial, construction material or cement terminal industries.
• Proficiency in basic electrical skills such as electrical panel wiring, testing, troubleshooting and other related tasks.
• Ability to work independently with minimum supervision.
• Capability to support manufacturing or industrial plants.
• Able to work in alternate 5 and 6 days per week arrangement as and when needed.
• Willingness to work at Jurong Port.

Job Description & Requirements

• Manage Sales Activities including address customers' enquiries, invoices & delivery orders, sales order processing, initialling of quotations and collection of payments.
• Perform support to sales admin & marketing functions.
• Site visit / meeting to discuss on delivery requirement. Updating data, filing and others sales support.
• Provide inside sales support to internal department to ensure team efficiency and effectiveness.
• Other Ad-hoc sales & admin duties assigned.
• Follow up marketing channel management.
• Propose and conduct build-up of an efficient net-work of distributors in assigned territory.
• Co-operate with distributors to implement sales and/or marketing activities/programs in the assigned market.
• Co-operate with distributors working with their customers such as retailers, contractors, specifies to gain some key sales & marketing objectives in respect of sales volume, market coverage, retail chain-efficiency and so on.
• Build up networking with construction companies, contractors, specifiers, board of project management.

Qualifications

• Possess at least a Diploma/Advanced/Graduate Diploma or bachelor’s degree in business administration / Management Studies / Sales & Marketing or equivalent.
• Having a minimum of 1 years working experience in sales will be an added advantage.
• Possess basic materials and market trend knowledge
• Knowledge of cemen and concrete technology or building materials
• Knowledge of latest product trends and activities
• Must be computer literate and have basic computer skills for reporting and presentation purposes
• Have strong interpersonal and communication skills
• Self-motivated and independent
• Possess own vehicle

To be responsible for all electrical and instrumentation equipment’s, troubleshoot and give solution to all the electrical & electronic related technical problems in the plant. Provide availability of plant 24/7 for shipment receiving, loading/unloading, packing plant, mixing plant and production activities.

Main duties and responsibilities:

• Perform electrical work, preventive maintenance and repairs on all the plant/facilities/industrial related equipment’s

• Read and work from blueprints and drawings in the installation, repair, and maintenance of plant electrical equipment with or without supervision

• Install, adjust and maintain all electrical equipment, gauges and instruments

• Troubleshoot, evaluate and coordinate electrical needs, repairs and modifications

• Ensure that manufacturer’s standards of repair and maintenance are performed on all equipment

• Repair and troubleshoot circuits, wiring, motors, starters, controllers, pneumatic valves, sensors, mixing plant and etc.

• Clean, lubricate and paint all the M&E equipment’s and keep all work areas safe, clean and orderly

• Evaluate and coordinate electrical needs, repairs and modifications

• Assist and perform emergency repairs throughout the plant

• Inspect equipment, report malfunctioning, including electrical equipment and carry out required repairs as needed

• Perform all the PM checklist and keep the maintenance records

• Prevent damage to machinery and equipment to determine what repairs are needed

• Be able to inspect mechanical equipment to determine what repairs are needed

• Be in-charge of electrical and instrumentation department, Issue Lock-out (LOTO) / work permit to other internal departments during maintenance and breakdown activities

• Plan and maintain required / most urgent spare parts at all times to minimize plant downtime

• Conduct risk assessment, to uphold and to adhere to all workplace safety regulations

• Calibrate testing instruments and install or repair equipment to prescribed specifications.

• Perform routine and emergency electrical tasks including, but not limited to, diagnosis of motor and electrical equipment faults, wiring issues, equipment replacement, etc.

• Team player to be able to work across departments and terminals

• Be able to direct personnel under him in executing an assigned task

• To have knowledge on electrical controls and instrumentation. Experience in PLC system is an added advantage

• Perform all other job responsibilities as assigned by supervisor

Requirements:

• Candidate must possess at least Professional Certificate/NiTEC in Engineering (Electrical/Electronic) or equivalent;
• Minimum of 3 - 5 years of machinery repair experience;
• Physical fit and flexible to work on extra hour when required.
• PLC knowledge, Knowledge of electrical wiring diagram, LEW license (added advantage)