Job Description:

• Conduct sampling and perform routine/non-routine microbial & chemical analyses such as purified water, raw materials, bulk products, finished products, and stability samples in accordance with approved procedures.
• Prepare laboratory reagents, microbiological culture media, media agar plates, sterilization of apparatus, and decontamination of microbiological waste.
• Carry out environmental monitoring activities (viable and non-viable airborne particulate contamination monitoring and microbial swab test).
• Assist in Microbial Limit Test (MLT), Antimicrobial Efficacy Testing (AET), Growth Promotion Test (GPT), Gram staining, microscopy, and microbe identification testing in accordance with established international standards.
• Assist in purified water system performance verification, production cleaning, sanitization validation, new product introduction, and continuous improvement initiatives.
• Document all results in accordance with Good Manufacturing Practices (GMP) and Good Laboratory Practices (GLP) requirements.
• Participate in out-of-specification and deviation investigations and recommend corrective actions.
• Maintains a high level of good housekeeping including ensuring all glassware, apparatus, and testing equipment are cleaned promptly once the analysis is complete.
• Participate in internal assessment and audit as required.
• Any other duties and responsibilities as assigned by the supervisor.

Requirements:

• Diploma in Microbiology, Biochemistry, or related discipline.
• Minimum 2 years of experience in cosmetics, food, nutritional personal care, medical devices, or pharmaceutical quality control laboratory.
• Knowledge of Good Manufacturing Practices or Good Laboratory Practices.
• Candidates with exposure to Halal, ISO 17025, or ISO 22716 will be an added advantage.
• Fluent in both oral and written English.
• Good communication and interpersonal skills.
• Systematic and able to work under pressure.
• Mature, proactive, attention to detail, well organized, analytical thinking, and quality minded.
• Meticulous and able to follow through with tasks promptly.
• Able to work independently as well as in a team.

Designated Van Driver for fetching PG officer

Responsibilities:

• Maintain the condition of company issued vehicle;
  
• Fetch SP PowerGrid officers from site to site;
  
• To ensure safe handling of vehicle at all times.
  
• Punctuality & reliability

Requirements:

• Obey all traffic regulations. Any fines/ infringements incurred will be settled by the driver of the vehicle.
• Class 3 license required; min 2 yrs driving experience.
• Mon - Sat, 8am-5pm
• Sunday OT if required

Contract position until 31/10/26

Job Highlights

• Family-oriented working environment
• 5 days work week (1 day work from home)
• Staff benefits and welfare
• AWS & VB
• Hybrid work arrangement and staggered working hours
• Transport and lunch provided
• Medical benefits/insurance such as dental, specialist claims, health screening

Summary

Develop and implement Quality, Health, Safety, Security, and Environmental (QHSSE) policies in accordance with company and industry standards. Must be familiar with the ISM Code, ISPS Code, MLC 2006, OVID/OVMSA, and ISO requirements, and assist in the preparation of QHSSE audits and inspections.

Job Description

• Manage and maintain the company’s QHSSE management system onboard vessels, identify gaps in the system/processes, and implement improvements.
• Prepare or update vessel-specific manuals as necessary.
• Follow up on incident/accident/near-miss reporting, investigation, root cause analysis, and preventive measures, ensuring proper documentation and closure.
• Prepare and distribute circulars as needed.
• Conduct office inductions and briefings for crew, shipboard training, safety coaching, and monitor computer-based training.
• Carry out shipboard internal audits/inspections, inter-departmental/company internal audits, and subcontractor audits as per the audit plan.
• Prepare vessels and attend shipboard audits/inspections (ISM, ISPS, MLC, OVID, CMID, OSVIS, HSE) conducted by clients or external parties.
• Follow up to rectify and close deficiencies or findings resulting from flag/port state control and vessel audits/inspections by clients or external parties.
• Follow up on client QHSSE requirements, including questionnaire submissions, attending meetings/workshops, preparing and implementing project-related management systems, bridging documents, HSE plans, and reporting month-end statistical reports.
• Monitor, support, and control QHSSE activities onboard, and review shipboard month-end submissions, risk assessments, and permits to work.
• Designated as Alternate Designated Person Ashore (DPA) and Alternate Company Security Officer (CSO), and a member of the shore-based emergency response team.
• Support the vessel superintendent in managing and accomplishing QHSSE tasks on time and perform other duties as assigned by the marine superintendent and QHSSE manager.

Job Requirement

• ISM/ISPS/ISO Internal Auditor Certificate
• DPA/CSO Certificate
• Accident/Incident Investigation and Root Cause Analysis Certificate
• Minimum of 5 years of experience in QHSSE functions within marine-related fields
• Proficiency in Microsoft Office applications
• Understanding of both offshore and onshore operations
• COC/seafaring experience preferred but not required
• Ability to travel to vessels at ports, shipyards, and offshore locations for shipboard audits, inspections, and training
• Availability to travel on short notice

Candidates interested in applying should include their expected salary, reasons for leaving their current role, and notice period in their resume. Please note that only shortlisted candidates will be notified.

1. Job Requirements

A. Educational Qualification and Experience

• Diploma / Degree in Engineering or its equivalent
• 3 to 4 years’ related work experience testing, QA / QC and document control.
• Working experience of ISO 9001
• Understanding of engineering and processes.
• Previous laboratory and tensile testing experience advantageous.

B. Skills and Abilities

• Physically fit able to carry some parts.
• Good problem solving skills.
• Strong math including standard/units of measurement calculations
• Sense of initiative and able to work under minimal supervision or ability to work as a team.
• Working knowledge of machines, equipment, and processes.
• Resourceful and proactive; ability to work in a fast-paced environment
• Attention to Detail: Exceptional attention to detail and accuracy in all tasks.
• Analytical Skills: Strong analytical and problem-solving skills.
• Communication: Excellent written and verbal communication skills.
• Teamwork: Ability to work effectively both independently and as part of a team.

2. Key Responsibilities

• Conduct Internal and External Audits: Plan, execute, and report on external audits to ensure compliance with industry standards and regulations.
• Testing: Ensures product testing incoming and finished product to established standards/procedures;
• Certify, File and control in-house and third party certificates very accurately.
• Filing of all certificates and paperwork both hard and soft copies.
• Maintain complete history of client products in use.
• Liaise with third party surveyors on testing and certifications wherever necessary.
• Review work procedures and method statements for compliance with good work practices.
• Ensure compliance with all safety regulations when carrying out inspections.

Location : 2 Tuas South Link 1, #02-02, S(636904)

Mondy to Friday : 7am to 4pm; Saturday : 7am to 11am

Company bus pickup : Lakeside and Jurong East MRT station

Responsibilities:

· To be able to operate forklift, pallet jack, etc

· Put-away the stock to designate location and update the system

. Ensure the product and quantity receive correctly

. Report any discrepancy to Supervisor

. Perform cycle count in daily basis

· Assist to re-stack or changing pallet of stock at Warehouse when required

· Perform unloading and receiving the shipment from Vendors

· Perform sorting, picking according to the orders

· Check the shipment with Driver & Driver Assistant before dispatch

. Assist to load the goods into the truck for dispatch

· Warehouse housekeeping

· Assist on online KCP (events)

· Other Ad-hoc duties given by superior

Requirements:

- Candidate must possess at least Primary/Secondary School/"O" Level in Logistic/Transportation or equivalent.

• At least 1 Year(s) of working experience in the related field is required for this position.
• Required Skill(s): warehouse, picking, sorting, loading, unloading, logistics
• An advantage to have basic computer knowledge in Microsoft Excel
• Preferably working experience in FMCG warehouse
• Will be an advantage if candidate has a Forklift Operating License

责任：

• 从集装箱卸载托盘/箱子、拣取、分拣、装货卡车、库存清点、仓库清洁等

要求：

• 必须至少拥有小学/中学/"O"级物流/运输或同等水平。

• 此职位至少需要 1 年相关领域的工作经验。

• 必需技能：仓库、拣货、分拣、装货、卸货、物流

. 具备Microsoft Excel的基本知识者优先

• 最好是在 FMCG 仓库工作的经验

DUTIES/RESPONSIBILITIES:

• Fabrication: Fabrication fittings based on client requirement

• Performing maintenance: Managing routine maintenance of equipment and infrastructure

• Repairing equipment: Diagnosing problems and repairing faulty equipment

• Maintaining records: Keeping detailed records of equipment, including repair history

• Suggesting improvements: Suggesting new solutions to improve the performance of equipment or systems

REQUIRED SKILLS/ABILITIES:

• Technical skills: The ability to install, repair, and maintain equipment or systems

• Possess a Nitec/Diploma/Degree in a relevant discipline

• Interpersonal skills: The ability to communicate with others and work well with them

• Time management skills: The ability to meet time constraints

• Problem-solving skills: The ability to diagnose problems and prepare solutions

• Organization skills: The ability to keep work areas clean and organized

• Min. NITEC/Diploma in Electrical, Electronic or Mechanical Engineering

Job Requirements

1. Class 3 or Class 4 Driving License

2. Able to drive a 12 feet to 14 feet lorry

3. Physically Fit and Healthy

4. Good Customer Service

Job Duties & Responsibilities

1. Plan delivery schedule for the day to ensure all deliveries completed for the day.

2. Contact customers for required order quantity and compile Sales Order listing from customers.

3. Visit customers to review stocks balance, plan replenishment quantity and perform e-invoicing to customers.

4. Handle documentation like e-invoices, delivery orders, purchase orders from customer and stock balance.

5. Handle some cash payment, sales orders from customers and assist in gathering feedback from customers.

6. Inspect vehicle, maintain vehicle in good working condition through regular servicing and cleaning of vehicle.

Salary, Benefits & Other Information

Starting Salary depends on Working Experience

13th Month AWS/Bonus

Monthly Incentives

5.5 Days Per Week, Sunday rest

3 Months Probations

Medical and Annual Leave, Medical Benefits

On-The-Job Training & Coaching by Supervisor

Job Description:

• Experience in apply /renewal /cancellation of work permit, S Pass & EP including workers' repatriation
• Monthly payroll including submission of monthly CPF & FWL
• Annual submission of income tax IR8A, NS Claim and others
• Submission of Tax clearance
• Update and maintain Personnel data file
• Prepare Employment Contract
• WICA Insurance Claim
• Take care of Dormitory & Catering arrangement for workers
• Arrangement of Skilled Course enrollment for Workers
• Co-ordinate with Supervisor & prepare schedule for daily workers allocation at site
• Planning of company annual event
• Provide support in administrative tasks
• Road Tax & Vehicle Insurance Renewal
• FWMI & WICA Renewal
• Submission of Government Claims such as maternity leave, childcare leave etc...
• Handling of Government Grant application such as Career Support Programme, Worklife Grant etc...
• Any other ad hoc duties as assigned

Requirements:

• Minimum 5 years Experience in full spetrum of HR Duties preferably in construction sector
• Must be strong in administrative support/ skills
• Able to work independently, dynamic with initiative within timeline
• Knowledge of Times Payroll software/Info-Tech is an added advantage
• Able to communicate in both English & Chinese (to liaise with associates)
• Working Location : Chin Bee (initially for the first 7-8 months), followed by Woodlands HQ thereafter (Tentative).

The incumbent is responsible for identifying market, product portfolio and individual customer strategies and opportunities. This position requires a strategic thinking, self-starting individual who is able to communicate with varying personal backgrounds in a business and social environment. This role is for Singapore / Brunei territory only.

Key Responsibilities

Market Development:

• Identify and develop new business opportunities, markets, and customer segments for Electric Motors / IOT products and services.
• Analyse market trends and competitor strategies to position our products effectively.
• Develop and implement strategic plans to penetrate the market and achieve sales targets.
• Strong Focus on MRO sales and development for Electric motors to new and existing customers.
• Business Development of IOT solutions

Customer-Relationship-Management:

• Build and maintain strong relationships with key customers, OEM partners, and stakeholders.
• Lead technical discussions, negotiations, and contract discussions, ensuring favourable terms and long-term partnerships.

Sales Strategy and Execution:

• Drive sales activities, from lead generation to closing deals
• Manage the sales pipeline, forecast sales, and report progress regularly to the Managing director

Skills:

• Strong analytical skills with the ability to identify market opportunities
• Excellent communication and negotiation skills, with the ability to influence decision-makers.
• Strong organizational skills and attention to detail.

Experience & Pre-Requisites:

• Proven track record in electric motor sales or relevant e.g electrical / automation / instrumentation solutions
• Good contacts with end-users in the Oil and Gas / Chemicals/ Manufacturing / semiconductor / Industrial segments
• Minimum 2~ 3 Years Sales experience in Electrical solutions selling
• ITE / Diploma or Bachelor’s degree holder in Electrical, Mechanical Engineering or relevant discipline
• Possess class 3 driving license and preferably to have own transport (Transport allowances will be provided)

Job Summary:

The ROV Pilot is responsible for operating, maintaining, and repairing Remotely Operated Vehicles (ROVs) and associated systems to support subsea operations such as inspection, maintenance, repair, and construction tasks in offshore environments.

Responsiblilities:

• Operate ROVs to conduct underwater tasks
• Technical Maintenance
• Troubleshoot and repair ROV hydraulic, and mechanical systems.(electrical system will be beneficial)
• Data Collection and Reporting
• Safety and Compliance
• Work closely with other team members

Qualifications and Skills:

· Training will be provided to those without experienced

Education and Certification:

• Diploma or degree in Engineering (Mechanical, Electrical, or related field) or equivalent experience.

Personal Attributes:

• Strong problem-solving and decision-making skills.
• Ability to work under pressure in challenging offshore environments.
• Excellent teamwork and communication abilities.

Work Conditions:

• Offshore assignments requiring extended periods on vessels or rigs.
• Onshore assignments requiring extended periods at anchorages
• Exposure to harsh weather and confined spaces.

Responsibilities:

• Operate 4-5 axis CNC Vertical Milling Machines and Horizontal Boring Machines.
• Set up machines accurately, including tooling, fixtures, and workpieces, based on engineering drawings and job specifications.
• Keep up with the housekeeping requirements at the workstation.
• Carries out duties as assigned by Foreman.

Requirements:

• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre.
• Understanding of tooling criteria, machining applications and process documentation.
• Min ITE Technical Certificate, preferably in Precision Metal Machining.

Job Description:

- Prepare weekly reports on vehicle repair status.

- Assist in writing meeting minutes to track outstanding issues.

- Conduct team briefings before starting work.

- Coordinate and manage team assignments and vehicle parking allocation.

- Plan and monitor vehicle sequencing and status for operational tasks.

- Provide documentation support to the Operations Leader for work-related needs.

Job Requirements:

- Degree in Engineering (Mechanical, Electrical, Hydraulic, Automotive, Electrical & Electronics, Mechatronics) or a Diploma in a related field with 5 years of relevant industry experience.

- Strong team player.

- Ability to lead a team effectively.

Are you up for the challenging next step in your career? Stolthaven’s Asset Management – Projects department is looking for a Project Engineer who responsible for execution of the technical projects (Capex) for the terminals.

As a Project Engineer, you will be the project manager and have responsibility for the engineering and construction of projects, including all relevant project management tasks.

In this dynamic role, your responsibilities range from construction and modification of physical assets to providing engineering support to the Asset Manager in the design and construction of bulk liquid storage facilities and related equipment. Within the local and global Asset Management teams, you will share knowledge & experience on your specific project or engineering discipline expertise and be involved in efforts to train Asset Management colleagues or other Stolthaven functions.

As part of the local Asset Management team, you will work in close cooperation with the MR&I Engineer, Maintenance Supervisors and other roles for developing project cost estimates to existing and proposed facilities in consideration of environmental and customer requirements. The position is also responsible for review and quality control of field construction work, although potentially supported by Construction Supervisors. Implements programs for compliance with all government and regulatory requirement and other technical areas.

SHVN Stolthaven Terminals a division of Stolt[1]Nielsen Limited (SNL), is the specialist storage provider of bulk liquids: Chemicals, clean petroleum, gases, vegetable oils, biofuels and oleochemicals. Our mission is to be the most respected global storage provider, delivering safe, high-quality, sustainable storage and handling solutions for our customers around the world.

Key Responsibilities

1. Provides comprehensive technical and management support on all technical projects assigned by the Asset Manager. Typically class I & II capex projects. This includes, but is not limited to:

• Prepare project details, scope engineering documents and cost estimate for the execution of the capex program together with (main) contractors and other departments and disciplines
• Prepare Requests for Quotation and other procurement documents in close cooperation with Stolthaven’s procurement team
• Responsible for coordination of procurement and or contracting of materials and services for your projects together with Stolthaven procurement
• Governance on quality and legal and or safety requirements during the whole project including execution
• Responsible for commissioning and closing of the project to operations and maintenance and ensure closure of project including timely completing of as-built files
• Responsible for leading change process in case of scope change
• Responsible for safety, quality, progress and cost control and reporting during the project
• Sets priorities and project scheduling for completion of projects within required deadlines
• Provides input to Manager of Engineering as required to complete monthly cost and schedule tracking reports on capital projects
• Supervises contractors in activities related to new construction, modifications to existing facilities and plant repair items
• Responsible for leading project evaluations and Management of Change processes for the projects at hand.
• For larger projects, this role can also be part of a project management team whereas the responsibilities are defined by the Project Manager.

2. General multi-disciplinary engineering works, such as:

• Support the preparation of technical proposals for improvements of technical installations
• o Proactively identifies technical risks in projects and seeks for mitigation
• o Providing assistance in the formation of annual capital budget forecasts
• o Ensure all systems within the facility are designed, installed, and maintained in accordance to local, state and federal regulations and standards

3. Support or promote innovations, new products and methods by:

• Meeting with vendors to acquire knowledge to technical advancement, cost control and alternate solutions to typical terminal design and maintenance requirements
• Attending continuing education seminars and conferences to acquire knowledge pertinent to technological advances and regulatory changes
• Interacts with other initiatives for example in Risk Based Inspection meetings contributing to standardized way of working over terminals and within team by working on corporate projects assisting the global Asset Management team

4. Enforces established plant safety and environmental policy and procedures as related to assigned projects and related tasks.

Qualifications

1. Bachelor/Master degree in Mechanical Engineering, E&IA, Civil or related field

2. Proven track record in an engineering design position, preferably in the field of storage tanks or in a related industry

3. Must be familiar with all applicable standards and codes relating to bulk liquid storage facilities for the applicable terminal location. This could include IEC, API, EEMUA, ANSI, NFPA, NEC, OSHA, and CFR and any other (local) codes.

4. Project management experience is preferred field

5. Minimum 5 years progressive engineering experience in terminal or related industry

6. Minimum 10 years progressive experience in terminal or related industry may be accepted in lieu of a degree

7. Self-motivated to ‘close the loop’ with actions and administrative responsibilities

8. Fluency in English and preferably in Chinese (read & write) as the job requires liaising with our Taiwan joint venture

9. Able to build and maintain both internal and external relations on various levels

10. Able to communicate effectively both verbally and in written

11, Proven safety leadership and service mindedness

12. Competences: self-motivated, flexible, stress resistant, result driven, team player, humour

13. Requires advanced conceptual thinking in complex and/or completely new situations and analytical skills

14. Must be computer literate with specific skills in MS Office

15. Knowledge of and experience with planning software (e.g. MS Projects, Oracle Primavera etc.) and Autodesk products (e.g. Autocad) is considered an advantage

16. Occasionally the ability and willingness to work weekends and/or holidays to accomplish critical project assignments

17. Depending on the required engineering discipline, have knowledge of the following:

• Mechanical: Must have in-depth knowledge of all standards and codes relating to bulk liquid storage facilities applicable to the location, such as API, ANSI, NFPA, NEC, OSHA, CFR, PGS
• EI&A: Must be familiar with all standards and codes relating to bulk liquid storage facilities applicable to the location, such as ATEX, IEC, IEC61511, SIL applications, field instrumentation
• Affinity with IT network components (e.g. firewall and basic networking setup) and experience with FAT for E&I system, panels, automation, etc.
• Knowledge and experience with reviewing drawings such as P&ID, Single Line Diagram, MCC drawings and other E/I/Automation specifications, calculations and drawings
• Knowledge and experience with ACAD and E-plan drawings
• Experience with trouble shooting E&I installations

18. Willing to working in Jurong Island (Company transport is provided at designated pickup point)

What we offer

Join us and become part of a family-founded organization where your contribution counts.

• A full-time and permanent role
• Working Hours: 5 days’ work week (Mon-Fri), 8.30am to 5.30pm
• A competitive compensation package, including a 13th month
• Good Flexible Medical Benefits for you and your family members
• Company Transport is provided as designated pick-up point

How to apply

• Complete the online application form and send it to us along with your CV
• Short-listed candidate, will be invited to attend interview at our terminal

Got questions about the process? Contact [email protected].

About Stolt-Nielsen

Stolt-Nielsen Limited is a long-term investor and manager of businesses, focused on opportunities in logistics, distribution, and aquaculture. The Stolt[1]Nielsen portfolio consists of its (three) global bulk-liquid and chemicals logistics businesses – Stolt Tankers, Stolthaven Terminals and Stolt Tank Containers – Stolt Sea Farm and investments in LNG. Stolt-Nielsen Limited is listed on the Oslo Stock Exchange (Oslo Børs: SNI).

Disclaimer for recruitment agencies

We don’t accept any unsolicited applications or CVs from recruitment and selection agencies.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit/replacement recommendations to clients

5. On-the-job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement/process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of faults/breakdowns and rectification according to authorities/clients' requirements.

9. Perform full set of testing complying with authorities/clients' requirements.

10. Perform maintenance programs and comply to authorities/clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit/replacement recommendations to clients

5. On-the-job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement/process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of faults/breakdowns and rectification according to authorities/clients' requirements.

9. Perform full set of testing complying with authorities/clients' requirements.

10. Perform maintenance programs and comply to authorities/clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Supervisor Responsibilities

• Set goals for performance and deadlines in ways that comply with company’s plans and vision and communicate them to subordinates

• Organize workflow and ensure that employees understand their duties or delegated tasks

• Monitor employee productivity and provide constructive feedback and coaching

• Receive complaints and resolve problems

• Maintain timekeeping and personnel records

• Pass on information from upper management to employees and vice versa

• Prepare and submit performance reports

• Decide on reward and promotion based on performance

• Hire and train new employees

• Ensure adherence to legal and company policies and procedures and undertake disciplinary actions if the need arises

Requirements

• Proven experience as supervisor or relevant role

• Familiarity with company policies and legal guidelines of the field

• Ability to learn a variety of job descriptions

• Excellent communication and interpersonal skills

• Outstanding organizational and leadership skills

• Good knowledge of MS Office

Education & Work experience Requirements:

1. At least Bachelor's degree in Automation, Control Engineering, Internet of Things (IoT), or related fields.

2. At least 3 years of relevant work experience in the structural steel industry.

Job Description:

1. Develop and optimize automation solutions based on production requirements, and coordinate with teams to deploy automated inventory management systems.

2. Design and improve automated steel structure production processes, integrating industry-standard software (e.g., Tekla) with processing equipment to achieve automated cutting, assembly, and welding.

3. Maintain existing production lines and propose improvements to minimize manual intervention and increase efficiency.

4. Collaborate with teams to ensure seamless integration of automated systems with existing production management systems, and provide training and guidance on new equipment and systems.

5. Generating reports outlining new automation ideas, machine and software upkeep best practices, test results.

Key Skill & Competency Requirements:

1. Proficiency in sensor principles and applications, with the ability to design and optimize sensor-based monitoring and control systems.

2. Proficiency in embedded systems design, including embedded hardware development, microcontroller programming (e.g., ARM, STM32), and real-time operating systems (RTOS).

3. Familiar with C# programming.

4. Familiar with mainstream automation development tools and software, such as LabVIEW, MATLAB/Simulink, Siemens TIA Portal, and AVEVA System Platform.

5. Familiar with industrial automation technologies, including PLC programming, servo control, and industrial robotics.

6. Familiar with smart manufacturing technologies (e.g., Industry 4.0, MES systems, IoT devices) and their applications in steel structure manufacturing.

As an expert consultant to bakeries, you will oversee various aspects of production, recipe development and quality control to ensure the creation of high-quality pastry products. Your role will involve both operational management and innovation to drive consistency, creativity and will also contribute to the company's growth by proposing and implementing new products and menu items that appeal to a diverse customer base.

Key Responsibilities:

• Quality Monitoring & Control:

- Regularly monitor and assess the quality of buns and other bakery products produced in the Central Kitchen and distributed across various outlets.

- Implement and oversee stringent quality control measures to ensure consistency and adherence to company standards.

• Training & Staff Development:

- Conduct training sessions for bakers and other production staffs to ensure consistent quality in all products.

- Provide ongoing support and mentorship to bakery staffs, reinforcing best practices in both production techniques and product presentation.

• Recipe Development & Innovation:

- Collaborate with the team to create and propose new recipes, flavors and designs for buns and other bakery products, enhancing the overall menu offering.

- Innovate with new ideals for seasonal or specialty products to increase variety and appeal, helping to meet or exceed the Company's sales targets.

• Product Promotion & Implementation:

- Take the lead on implementing, promoting and improving both new and existing product lines, ensuring they align with market trends and customers' preferences.

- Assist in creating promotional strategies that highlight new items, leveraging their potential to boost sales.

• Production Support & Crisis Management:

- Stand in as a baker and assume full production duties during emergencies or staffing shortages, ensuring that operations continue smoothly without compromising quality.

• Collaboration & Continuous Improvement:

- Work closely with bakery management to continually assess production processes and identify areas for improvement, ensuring efficient operations and high product quality.

- Offer ongoing support for recipe testing, ingredient sourcing and production enhancement.

Qualifications & Skills:

• Extensive experience in baking, pastry arts or related fields, with focus on high-quality production and recipe development.
• Proven leadership experience, with the ability to mentor, train and inspire bakery staffs.
• Strong knowledge of quality control procedures, food safety standards and production efficiency.
• Creative mindset with a passion for developing new recipes and bakery innovations.
• Excellent communication and organizational skills.
• Ability to thrive in fast-paced environment and manage multiple tasks efficiently.

· Willing to work retail hours (split shift work, weekends and public holidays)

1. Conversation with clients to determine the services that they need.

2. Evaluate clients to locate painful or tense areas of the body.

3. Interview clients to determine of an illnesses or medical conditions that they may have which will keep them from taking proper benefit from massage treatments.

4. Provide clients with knowledge of different types of available massages and suggest appropriate massage therapies for individual clients.

5. Explain massage procedure and provide information about oils and creams used during massage.

6. Perform massaging activities according to each client’s instructions

(pressure and preferred oil / cream)

7. Talk to clients (minimally) during massage treatments to ensure their wellbeing during the procedure.

8. Use aids such as infrared lamps, ice and hot or cold compresses to help with massage.

9. Maintain a constructive attitude and add toward a quality work environment.

10. Help in all areas of massage operation as requested by organization

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

Looking for Mobile Crane Operator (Full Time) for 25 Tons Mobile Crane. (Able to start as soon as possible!)

Our company specializes in 25 Tons Mobile Crane Loading & Unloading Services

Our jobs are mostly inside Jurong Port and some ad hocs on Singapore Mainland.

Responsibilities

• Operate 25T Mobile crane for the handling of ship supplies & provisions from shore to boat and/or vice versa
• To handle cargos efficiently and in full compliance with safety and regulatory requirements
• Coordinate between boat crew members as well as external contractors for cargo handling
• Report technical fault or and safety/security infringementsJob Requirements
• Provide lifting services at client site as per the deployment schedule
• Ensure workplace (crane) is clean and tidy
• Daily check for any faults/defects to crane
• Report any faults/defects on crane to Mechanic immediately
• Signing of DO and Timesheet
• Other ad hoc jobs allocated by Supervisor

Requirement for Operator:

• Possess a mininum of class 5 license and mobile crane operator certification (MOM).
• Willing to work on weekends and Public Holidays, night shift works, when required
• Singaporean/PR only

Salary Package: Basic Wage + Allowance + Overtime

Fresh license are welcome to apply as well.

Interested parties please email us directly at [email protected]! Many thanks.

• Min 2 years of mobile Apple or Android repair experiences

• Able to work retail hours, 6-day work week, weekends, and public holidays

• Self-motivated. and team player

• Repairing of mobile phones / Macbook, LCD, Battery, spare parts replacement

• Diagnose, troubleshoot, and repair devices

• Able to Diagnosis & Repair Motherboard

• Provide actual diagnosis for clients,Ensuring work area are clean

• Ensure that all repairs meet CMS Repair quality standards

• Keep track of all devices and inventory while safeguarding all store stock

• Assist customers with their enquiries

• Able to comply with company rules and regulations.

At Leica Microsystems, we have been shaping the future for over 175 years with groundbreaking optical and digital solutions. With a culture rooted in customer focus, innovation, and teamwork, we lead the market in microscopy, imaging, and analysis, unveiling the invisible and empowering our customers to build a better, healthier world.

Joining Leica Microsystems means contributing to scientific discoveries and supporting surgeons in making critical decisions. Our advanced microscopes and AI-based image analysis solutions enable users to gain profound insights into development and engineering challenges. Here, you will work on meaningful projects alongside passionate colleagues, driving progress and pushing the boundaries of what’s possible.

Learn about the Danaher Business System which makes everything possible.

We currently offer the following position in our office in Singapore.

The Assistant Finance Manager is responsible for driving the organization's financial success by managing comprehensive accounts, ensuring compliance with regulations, and supporting strategic growth initiatives.

This position reports to the Senior Financial Controller and is part of the Finance Department, located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Manage full set of accounts including monthly closing and completion of monthly account reconciliations.
• Prepare quarterly GST and work closely with local tax agent to ensure timely submission of corporate tax return. Support self revenue recognition testing, internal and external audits.
• Support the business to drive sustainable profitable growth and meet financial objectives.
• Maintain strong internal controls, ensure compliance to US GAAP, local laws and regulations and Danaher/Leica policies.
• Supervise, train and develop talent

The essential requirements of the job include:

• Accounting Degree or equivalent with >5 years’ experience in handling full set of accounts
• Knowledge of SAP is a must
• Proficient in Microsoft Excel, knowledge of Power BI is a plus
• Good influencing and communication skills, ability to work under pressure

WHAT WE OFFER

• Equal pay is a given for us.
• Learn all about Kaizen, PSP’s and Muda as part of our Danaher Business System (DBS) trainings – if you believe in continuous improvement like us
• We offer employees a wide range of training opportunities (including virtual) in languages, technology and the Danaher Business System (DBS) Academy

Leica Microsystems, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job.

Join our winning team today. Together, we’ll accelerate the real-life impact of tomorrow’s science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life.

Are you interested to discover new opportunities in an innovative, team-oriented environment?

Do apply online - we are looking forward to your application!

Join our winning team today. Together, we’ll accelerate the real-life impact of tomorrow’s science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life.

For more information, visit www.danaher.com.

Leadership and Management:

Lead and motivate the departmental team to achieve objectives.

Foster a positive work environment that encourages collaboration and innovation.

Strategic Planning:

Develop and implement the department’s strategic goals and objectives.

Align departmental initiatives with the overall vision and mission of the organization.

Budget and Resource Management:

Manage the departmental budget, ensuring effective allocation of resources.

Monitor expenditures and identify cost-saving opportunities.

Performance Monitoring:

Establish performance metrics and KPIs to assess departmental success.

Regularly review and report on departmental performance to management.

Policy and Procedure Development:

Develop and implement policies and procedures to improve operational efficiency.

Ensure compliance with relevant regulations and standards.

Collaboration and Communication:

Work closely with other departments to facilitate cross-functional initiatives.

Serve as a liaison between the department and upper management.

Team Development:

Identify training and development needs for team members.

Mentor and coach staff to enhance skills and career growth.

Stakeholder Engagement:

Engage with internal and external stakeholders to gather insights and feedback.

Represent the department in meetings and discussions with senior leadership.

Qualifications

Education: Diploma or Bachelor’s degree in a relevant field

Experience: Significant experience in a leadership role

Working rights required for this role

Skills: Strong leadership, communication, and analytical skills; ability to make data-driven

decisions.

Experience in pre & post contract administration

Prepare tender cost submission / quantity take off / cost evaluation

Source for subcontractors and suppliers

Degree in Quantity Surveying/Estimating/architecture in Construction

Minimum 3 years working experience in Contractor Firm

Computer Skills and good knowledge in Microsoft Excel, Microsoft Word and BIM

Local and Malaysia experience preferred

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

The Pre-Sales Manager (Cybersecurity) manage the pre-sales team and supports the sales team by providing technical expertise and product demonstrations to potential customers. This role ensures that the cybersecurity products meet customer needs and helps drive sales.

Job Description

• Develop proposal for the tenders/bids.
• Experience in overall design for network and security solutions.
• To prepare and deliver the business value solutions for customers, including proposal writing, presentation, conduct, proof-of-concept to showcase its technical feasibility when necessary.
• Work closely with the product management team to ensure proper customer solution positioning and respond to technical aspects of RFPs/RFIs.
• Arrange technical training for clients and sales teams, and conduct proof of concepts, solution designs, and technical workshops.

Requirements

• At least 3 – 5 years of working experience with knowledge of product pre-sales.
• Preferably having formal experience in pre-sales, post sales, delivery team in a tech industry.
• Familiar in the project methodologies such as Planning, Design, and relevant Technologies
• Excellent written and verbal communication skills to explain complex technical concepts in simple terms.
• Possess in-depth knowledge of current technologies, tools, methodologies and industry trends, Government guidelines.
• Possess relevant professional certification like CISSP would be an added advantage.
• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.