JOB DESCRIPTION

· Understand the product requirement and create SOC system level architecture according to the requirement.

· Understand the use case and create system level test plan.

· Define design specification for new hardware modules, together with IC design engineer.

· Work with IC design engineers to resolve the issues during design phase and qualify the design.

· Understand the design specification of existing hardware modules and make improvement.

· Perform FPGA validation before tape out and silicon verification after tape out

· Provide support for any issue reported from customer.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with firmware development experience Familiar with SOC design, including bus architecture, memory sub-system, video signal processing, etc.

· Familiar with standard peripherals, such as UART, I2C, SPI, I2S, PWM, SD, flash controller, etc

· Familiar with IC design activities, such as RTL coding, timing analysis, etc.

· Familiar with lab equipment

· Knowledge in WIFI/Bluetooth physical layer or MAC operation is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Job Description:

Order Fulfilment

• Picking, Packing, loading & unloading of goods from racks, shelves, vehicles and containers
• Responsible for receiving, releasing, packing & repacking of goods
• Dispatching goods to logistic team

Inventory Management

• Perform inventory recording & checking
• Verify computations against physical count of stock
• Assist in Stock Take

Ad-Hoc Task

• Support Daily Warehouse Activities
• House Keeping of warehouse & company compound
• Other ad-hoc duties assigned by management

Job Requirements:

• Proactive, willing to take initiative
• PC Literate
• Good team player, possess initiative & ability to work independently
• Forklift license would be advantages
• Able to commit OT when required

Other Information:

• 5 days work week (Monday - Friday)
• 08:00am - 17:45pm

Job Responsibilities

• Develop and implement strategies for vouchers, pricing, product expiry, and page design across e-commerce platforms such as Shopee, Lazada, Amazon, Shopify, CorDx online store and etc.
• Design product listings, including images and descriptions, to enhance visibility and sales.
• Create and manage customer recovery plans, handle feedback and queries to ensure a positive customer experience.
• Design and produce promotional materials such as banners, brochures, and advertisements for our physical store locations.
• Manage and create content for social media platforms including TikTok, Instagram, and Facebook and etc, focusing on engaging stories and posts to drive brand awareness and customer engagement.
• Develop promotional and informational materials for CorDx products, focusing on pricing strategies and product benefits.
• Design and prepare materials for CorDx trade shows, including booth and poster designs.
• Coordinate with local printing vendors for materials production and manage logistics for trade show activities.
• Produce marketing materials such as brochures and design retail shelf layouts in alignment with advertisement and promotional plans for retail outlets.
• Develop educational and promotional materials for CorDx distributors to enhance product knowledge and promote product adoption.

Job Qualifications:

• Bachelor’s degree in Marketing, Business, Communication, or related field.
• Experience in e-commerce and social media marketing.
• Strong graphic design skills and proficiency in design software.
• Excellent verbal and written communication skills, with proficiency in English and Chinese to speak with counterpart in China.
• Ability to work independently, manage multiple projects, and meet deadlines in a fast-paced environment.
• Creative thinker with strong analytical and problem-solving skills.

Roles & Responsibilities:

- Oversee daily transactions, including accounts payable/receivable, general ledger and bank reconciliations

- Prepare budgeting reports and forecast revenues

- Manage month-end and year-end closing

- Monitor the daily performance of the accounting department

- Organize financial data into useable information and maintain updated records

- Track the progress of financial and accounting objectives

- Establish accounting policies and procedures, aligned with company’s targets

- Ensure compliance with the law

Job Requirements:

- Bachelor's degree in Accounting or Business Administration required.

- Five years or more of related experience required.

- Proficient in Microsoft Office applications, with advanced Word, Excel, PowerPoint

- Has a good command of English, with both written and oral communication skills

- Ability to multitask and prioritize daily workload

- Takes accountability of work and good attitude over teamwork

- 5.5 days work per week; Mon-Fri: 9am-6pm; Sat: 9am-1pm

Responsibilities:

• To assign work tasks to various personnels within the Operation Department.
• To handle complaints and feedback.
• Communicate and coordinate on customers orders and various requirements.
• Ensuring smooth delivery of cargoes to customers/site within schedule.
• Required to handle import/export permits and various documents as required by the customer.
• Application of required customs and LTA permits etc…
• Other admin and billing functions.

Requirements

• Min GCE 'N' or 'O' Levels
• Min 1 year similar work experience
• Entry Level candidates are welcome to apply, must be willing to learn
• PC literate
• Well organize & able to multi-task
• Willing to work in West Area (Company transport from Joo Koon/Choa Chu Kang MRT)
• All are welcome to apply

Responsibilities:

• Support the Project Director (PD) in project functions, including project management, site management, and risk control to achieve project goals.
• Lead and mentor the project team by setting guidelines, providing advice, and supervising as needed.
• Oversee all project management activities from planning and coordination to completion within budget, schedule, and quality standards.
• Assist PD in compiling project progress reports (e.g., Monthly Report, VO Management, EOT Assessment, Project Progress Updates).
• Monitor the project schedule and manage daily operations, setting short- and long-term goals, coordinating with other contractors.
• Conduct technical reviews to ensure contract compliance and adherence to completion timelines.
• Liaise with clients, consultants, and contractors, attending regular meetings to ensure project progress.
• Supervise site labor and subcontractors, resolving construction issues as they arise.
• Oversee quality control, safety, and EHS practices on-site, identifying high-risk activities before construction and approving Method Statements.

Requirements:

• Degree in Civil Engineering or equivalent, recognized by the Singapore Professional Engineers Board (PEB).
• At least 10 years of experience in the construction industry.
• Experience in LTA, roadworks, MRT, and viaduct projects.

_____________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Create and manage digital marketing strategies to drive leads and enhance online presence.
• Track, measure, and report digital campaign performance against ROI goals.
• Create and adapt Chinese-to-English content for various formats, tones, and channels, collaborating with teams for appropriate assets.
• Contribute to product positioning, marketing strategy, and product naming.
• Manage social media accounts for example, Instagram, Facebook, TikTok, YouTube to boost brand awareness and engagement.
• Update marketing materials, maintain content databases, and collaborate with regional marketing teams.

Requirements:

• Degree in Marketing/Communications or equivalents.
• Interest in skin care, wellness and healthcare products.

________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Ensure brand integrity, messaging, and strategy consistency across campaigns and the marketing funnel.
• Create and manage digital marketing strategies to drive leads and enhance online presence.
• Track, measure, and report digital campaign performance against ROI goals.
• Coordinate with media outlets for brand-appropriate coverage opportunities.
• Research trends, brainstorm new ideas, and develop engaging content.
• Collaborate with internal teams to optimize ads for keywords, objectives, and budget.
• Contribute to product positioning, marketing strategy, and product naming.
• Manage social media accounts (Instagram, Facebook, TikTok, YouTube) to boost brand awareness and engagement.
• Update marketing materials, maintain content databases, and collaborate with regional marketing teams.

Requirements:

• Degree in Marketing/Communications or equivalents.
• Minimum 1 years of related working experience.
• Interest in skin care, wellness and healthcare products.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Primarily deal with non-or minimally-invasive procedures.

Requirements:

• Must possessed MBBS certification.
• Have at least 5 years of experience as aesthetic doctor.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• To assign work tasks to various personnels within the Operation Department.
• To handle complaints and feedback.
• Communicate and coordinate on customers orders and various requirements.
• Ensuring smooth delivery of cargoes to customers/site within schedule.
• Required to handle import/export permits and various documents as required by the customer.
• Application of required customs and LTA permits etc…
• Other admin and billing functions.

Requirements

• Min GCE 'N' or 'O' Levels
• Min 1 year similar work experience
• Entry Level candidates are welcome to apply, must be willing to learn
• PC literate
• Well organize & able to multi-task
• Willing to work in West Area (Company transport from Joo Koon/Choa Chu Kang MRT)
• All are welcome to apply

Roles & Responsibilities

Job Description:

We are looking for a competent Construction Assistant Foreman to coordinate operations and oversee workers at construction sites. As the point of reference of both workers and supervisors, you will be a key person for the completion of a project.

A construction assistant foreman has a solid background in the field. Your leadership skills and your extensive experience have earned you the ability to direct the work of others and make quick decisions. You must be well-organized and favour safety above everything else.

Responsibilities:

Coordinate tasks according to priorities and plans

Produce schedules and monitor attendance of crew

Allocate general and daily responsibilities

Supervise and train workers

Ensure manpower and resources are adequate

Guarantee all safety precautions and quality standards are met

Supervise the use of machinery and equipment

Monitor expenditure and ensure it remains within budget

Resolve problems when they arise

Report on progress to managers, engineers etc.

Requirements:

Proven experience as construction assistant foreman

In-depth knowledge of construction procedures, equipment and OSH guidelines

Ability to read drawings, plans and blueprints

Excellent organizational and leadership skills

Ability to communicate and report effectively

Aptitude in math

Problem-solving abilities

Good physical condition and stamina

Able to understand structural drawing, specifications and requirements

JOB DESCRIPTION

· Wireless AP software development and firmware development

· Network communication protocol development

· Embedded system development

· Execution of pre-test for IoT/ Wi-Fi router related certification

JOB REQUIREMENTS

· Bachelor’s Degree or above in Computer Science, Computer Engineering, Electronic, Telecommunication or Networking Engineering

· Familiar with C/C++ and Linux system

· Familiar with networking and embedded system development

· WiFi development experience is an advantage

· Good communication and team working skills

· Good problem solver, ability to think out of the box

· Passion in programming is an advantage

JOB DESCRIPTION

· Embedded system software development

· IoT related protocol and software development

· Peripheral device driver and Wi-Fi related software development

· Customer issues support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electronics or Networking engineering

· Familiar with C/C++

· Familiar with embedded system and experience in driver-related development is an advantage

· Peripheral and Wi-Fi-related experience is an advantage

· Good communication and team working skills

The School of Materials Science and Engineering (MSE) provides a vibrant and nurturing environment for staff and students to carry out inter-disciplinary research in key areas such as Computational Materials Science, Characterisation Materials Science, Defence Composite Materials, Functional Composite Materials, Energy, Nanomaterials, Low Dimensional Materials, Biomaterials Materials, Biological Materials, Bioinspired Materials and Sustainable Materials.

Our research group focuses on research areas relevant to macromolecular and hybrid materials, including topics in the fields of polymer science and engineering, composite science, environmental science, and so on.

Key job purpose is to develop green and scalable mechanical or chemical polymer upcycling technologies, particularly for polyurethane.

Key Responsibilities:

• Develop green and scalable mechanical or chemical polymer upcycling technologies, particularly for polyurethane.
• Conduct research and development activities on polymer pre-treatment and mechanical/chemical upcycling, including formulation of problem statement, design and execution of lab-scale and pilot-scale experiments/operations, sample characterizations, data analysis, and so on.
• Engage and communicate with existing or future industrial and academic collaborators to advance the developed technologies from lab-scale verification to pilot implementation.
• Prepare technical reports, intellectual properties documents, safety documents, and academic publications

Job Requirements:

• PhD degree in Materials Science, Polymer Science, Chemical Engineering, or fields related to polyurethane.
• At least 6-8 years graduate study or working experience in research and development on topics on polymer science, chemical engineering, and green technologies
• Proficiency in hands-on and characterization techniques such as TGA, DSC, FTIR, DMA, rheology, NMR, CHNS, XRD, XPS, engineering design and drawing etc.
• Able to exhibit leadership roles in handling and managing multi-disciplinary projects
• Experienced in preparation of academic and pilot-operation proposals
• Good team-player, good communication skill, problem solver, thinker and doer
• Good wet laboratory practice and familiar with considerations on laboratory safety
• Passionate in research and solving real-time environmental issues related to plastic upcycling
• Software skills relevant to process design, mass balance, cost analysis, and life-cycle-analysis are favorable
• Industrial experience in polymer upcycling and productization is favorable

We regret to inform that only shortlisted candidates will be notified.

JOB DESCRIPTION

• CP test program development.
• Work with designer to develop test programs, debug programs, solve problems.
• Work with commissioned factory to identify, propose, prioritize and implement test automations.
• Design automated test scenarios accordingly to test plan with its acceptance criteria
• The commissioned testing factory product management.
• Test plant test plan management. Ex: prepare test environment, test data, update functional test scripts according to changing requirements
• Contribute towards continuous improvement of testing practices/tools to improve test strategy and efficiency
• Help to ensure every release happens in a timely manner with a high level of quality.

JOB REQUIREMENTS

• Bachelor’s/ Master’s degree in Electronical Engineering ,Computer Science, Software Engineering or other equivalent degree/experience
• Strong VBT scripting skill and C++ programming background
• Good written and verbal communication skills in English and Mandarin is required to liaise with Chinese associates/clients
• Able to work well both independently as well as in a team
• Singaporeans are welcome to apply

JOB DESCRIPTION

In this position, the individual thoroughly understands digital design specs of various IP blocks and SoC architecture definition

• Develop detailed module level and SoC level testplans for all the functional features, based on the design spec.

• Develop ASIC verification environment including all the respective components such as stimulus, checkers, assertions, monitors and scoreboards.

• Develop directed and constrain-random verification functional tests and simulate using EDA tools to verify functional spec is working

• Execute verification plans, including design bring-up, DV bring-up, regression enabling for all the features.

• Collaborate with digital design team to debug functional testcases and deliver functionally correct designs

The ideal individual must have proven ability to achieve results in a fast moving, dynamic environment

JOB REQUIREMENTS

· BSEE or MSEE, entry level

· Strong communication, analytical and documentation skills and ability to interface with other groups

· Strong VLSI functional verification experience, preferably with exposure to complex, high speed custom VLSI products

· Strong hardware functional verification language and Object-oriental language development skill. Prefer with SystemVerilog/ UVM experience

· Familiar with ASIC verification methodology, tools, and development flow

· Working experience or familiar with Ethernet L2/L3 switch/router, SOC, AMBA bus, high-speed IO (USB-2/3, PCIe gen2/3, SATA), Flash controller, or CPU peripherals

JOB DESCRIPTION

· Understanding of the customer requirements and developing technical solutions for customers.

· Strong collaboration with several stockholders including customer, sales and marketing, RD team.

· Support customers during the all development cycle from design specification until mass production.

· Exposure to schematics and PCB layout design review.

· Direct contact with customers implies excellent communication skills.

JOB REQUIREMENTS

· Bachelor’s degree or above in Electronic Engineering or related majors

· Min 3-5 years of relevant work experience in semiconductor

. Must has outstanding hardware and RF bring-up experience for WLAN + BT combo, as well as best expertise of OFDM/OFDMA, MIMO, RF component knowledge and front-end matching.

. Proficient with multiple tools for board design, such as OrCAD, Allegro, impedance calculation, ADS simulation and other RF/digital simulation on board level.

. Strong communication and interpersonal skills to handle whole board design process, debug critical issue, optimize RF matching, decent documentation technique.

· Familiar with Litepoint IQxel tester, R&S CMW tester, spectrum analyzer, signal generator, network analyzer, power meter, attenuator, and other WLAN/BT test equipment is an advantage.

· Strong customer management and problem-solving skills

· Good communication and team working skills

· Singaporeans are welcome to apply

Responsibilities:

• Coordinate purchasing activities for materials and services based on company’s needs
• Handle quotation, issue purchase order and maintain updated records
• Track orders and ensure timely delivery
• Update internal databases with order details
• Conduct market research to identify pricing trends
• Evaluate offers from vendors and negotiate better prices
• Vendor sourcing activities
• Prepare reports – Price evaluation report, expenses report and etc
• Performs other duties as assigned

Requirements:

• Good understanding of supply chain procedures
• Hands on experience with purchasing software
• Computer skills in Microsoft Office Suite (Word, Outlook, Excel and Power Point)
• Meticulous “eye” for detail and accuracy
• Min. 2-3 years of work experience
• Min. Diploma or Bachelor’s degree
• Able to create and administer a task priority list based on company’s needs
• Desire to grow, take on new responsibilities and establish yourself on our team

Other Information:

• 5 working days, Monday to Friday (8.00am to 5.30pm)
• Two ways company transport provided at Boon Lay & Pioneer MRT station
• Permanent Full Time role

Job Summary:We are seeking a highly organized and proactive Executive Assistant to support senior leadership and ensure smooth daily operations. The ideal candidate will possess strong communication, problem-solving, and multitasking skills to handle a wide range of administrative tasks efficiently.

Key Responsibilities:

• Organise board meetings and ensure relevant documents are distributed to the Directors and Stakeholders.
• Liaising with the Board of Directors & Stakeholders on meetings and announcements.
• Managing and drafting of all corporate confidential documents, inclusive legal agreements, engagement contracts, ACRA filing, meeting minutes, board resolutions, annual report. Meeting presentation deck.
• Compile and close monitoring of all statutory licences for the company.
• Support both the CEO & President on all administrative task and to follow thru with the relevant stakeholders timely.
• Managing the CEO & President’s calendar and to make travel plan, booking and meeting event appointment appropriately.
• Organized and co-ordinate on any company events when required.
• Arrange, co-ordinate and as the point of contact for visitors and statutory agencies visiting to site, inclusive receiving and networking with them.
• Other ad-hoc duties as requested by the Management.

Required Skills & Qualifications:

• Proven experience as an Executive Assistant or in a similar administrative role.
• Exceptional organizational and time-management skills.
• Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook).
• Excellent verbal and written communication skills.
• Strong attention to detail and ability to multitask effectively.
• Ability to work independently and prioritize tasks.
• High level of professionalism and integrity.
• Discretion with sensitive and confidential information.

Preferred Qualifications:

• Experience with project management software and tools.
• Familiarity with handling budgets or financial reports.
• Bachelor’s degree in business administration or a related field.

JOB DESCRIPTION

· Design and program automated test scenarios according to test plan with its acceptance criteria

· Manage and maintain end to end automated test framework such as prepare test environment, test data, update functional testing scripts in accordance with changing requirements

· Work with QC project leader to identify, propose, prioritize and implement test automations.

· Work with test engineers to troubleshoot observed issue, determine root cause and identify solutions

· Contribute towards continuous improvement of testing practices/tools to improve test strategy and efficiency

· Help to ensure every release happens in a timely manner with a high level of quality.

JOB REQUIREMENTS

· Bachelor’s/ Master’s degree in Computer Science, Software Engineering or other equivalent degree/experience

· Strong python scripting skill and C++ programming background

· Good written and verbal communication skills in Chinese ( Required to liaise with Tawiwan colleagues)

· Able to work well both independently as well as in a team

(a) Processing of sales orders in a prompt manner

(b) Issuing sales invoice and credit note

(c) Account for deliveries, resolve undelivered orders and stocks returned

(d) List and expand the products and offers onto e-commerce platforms

(e) Monthly analysis of e-commerce metrics in terms of service level, response rate and present recommendations to improve ratings

(f) Identify competitors and monitor their pricing and activities

(g) Overall liaison with respective e-commerce platform representatives

(h) Assist in the management of E-commerce warehouse assistants

(i) Assist in the management of sales admins

(j) Maintain and compile monthly reports

(k) Identify new products that add on offer

(l) Contact customers / vendors to answer their queries

JOB DESCRIPTION

· Define the architecture and design specification for in house video encoder and decoder, according to market requirement.

· Make assessment of the video encoder quality, either in house design or licensed IP.

· Work with IC design team to resolve the issues during design phase.

· Create test plan for the video encoder and decoder and qualify the design.

· Work with software team to develop the driver for the video encoder and decoder.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with IC design background

· Familiar with video compression technology, such as MPEG4, H264, H265, MPEG5, etc.

· Familiar with video quality assessment.

· Familiar with video encoding algorithm and video decoding compliance test.

· Familiar with architecture of video encoder and decoder RTL design.

· Knowledge in video/image pre and post processing is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

JOB DESCRIPTION

· Discussion with system engineers on SoC architecture and feedback on optimization.

· Work on SoC integration; system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;

· Discussion with synthesis engineer and back-end engineer on design optimization.

· SoC DFT support;

· SoC verification plan and SoC verification support

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Knowledge of ASIC design flow

· Experience in RTL coding, RTL and gate-level debug

· Understanding of DFT, timing and power requirements

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Knowledge on mixed-signal design would be an advantage.

JOB DESCRIPTION

· Discussion with system engineers on IP requirement and micro architecture.

· Develop IP (control path intensive or data path intensive) meet functional requirement and protocol standard.

· Support SoC designer on integration, timing constraints and power domain setting.

· Support IP verification for verification plan review, test case debugging.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Experience in IP development (either control path intensive or data path intensive)

· Knowledge of timing, DFT and power structure.

· Familiar with UNIX/ Linux environment and scripting

· Experience on communication IP and/or video IP development would be advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Experience on communication IP development would be an advantage

· Experience on video IP development would be an advantage