Responsibilities:

Supervise employees to help ensure efficiency and productivity.

Able to handle the Halal chicken meat. Process raw ingredients, chopping and slicing of chicken, etc.

Able to work with minimum supervision.

Able to work in cold room temperature.

Ensure work safety, hygiene are followed. Products manufactured comply with food safety standards.

Requirements:

Have relevant experience in food processing is required.

Candidates are required to handle heavy products.

Physically fit.

The ability to foster teamwork

Responsibilities:

Supervise and manage the drivers team.

Drive the cold truck lorry to deliver the frozen meat production to customers on time.

Assist the manager to schedule the timetable and assign the line to the drivers.

Maintain the vehicles and keep driving safe.

Night shift and long time work is required.

Load and upload the goods.

Requirements:

Singapore Class 3/4 Driving License is required. Having a Class 4 license is an advantage.

Familiar with Singapore route.

Physically fit.

Can handle the heavy goods.

Can adapt the night shift working hours.

Position Summary:

To be expertise with complete technical knoweldge on troubleshooting, modification and new design for marine and offshore equipment control system & pannel wiring - Cranes, Winches, Hydraulic Power Packs.

Responsibilities:

1. Take full responsiblity from customer enquiry to project completion including all commercial and technical.
2. Lead team on electrical jobs.
3. To prepare electrical Schematics diagram (Single line or Electrical Block Diagram).
4. Design and hands on cable Termination.
5. Equipment technical Specification based on owner’s requirement, Classification bodies, and all relevant authorities.
6. Prepare document for shipyard repairs.
7. Travel overseas on short notice for offshore and marine jobs.
8. Basic knowledge on PLC programming
9. Coordinate with hydraulic team on troubleshooting and rectifications.

Job Requirements:

Minimum 4 to 6 Years on offshore and marine equipments

Working at shipyard environment

Familiar with Microsoft Office

English fluency and report writting skills.

Class 3 driving licence

• Servicing experience on Marine and Offshore deck equipment.
• Intensive knowledge on hydraulic system troubleshooting.
• Hydraulic system modification.
• Knowledge on Low pressure system service and troubleshooting.
• Min knowledge on electical control system and fault finding.
• Service / Troublshoot / Repairing knowledge on marine and offshore cranes and winches.
• Communication / Report writting skills.
• Overseas travel on short notice.
• Attending ship repair meeting / apply permit / Preparation of shipyard entery documents.
• As a team leader.
• Participate in vessel dockings repair work at shipyards.
• Adhoc duties as assigned

A Laundry Delivery Driver is responsible for delivering clean laundry to customers and collecting soiled laundry for cleaning, ensuring timely and efficient service.

Job Description & Requirements:-

• Collect soiled laundry from customers and deliver clean laundry to Hotel, Retaurant or commercial locations on time.
• Plan and follow an efficient delivery route to maximize time and fuel usage while meeting customer deadlines.
• Provide friendly and professional customer service when picking up or delivering laundry, addressing any questions or concerns.
• Maintain accurate records of deliveries and pickups, including customer information, special instructions, and completed tasks.
• Regularly inspect the delivery vehicle, ensuring it is clean, fueled, and well-maintained. Report any mechanical issues or required repairs to supervisors.
• Strong customer service and communication skills.
• Basic organizational skills for handling orders, paperwork, and delivery schedules.
• Ability to work independently and manage time effectively.
• Valid driver’s license and a clean driving record.

The Advanced Remanufacturing and Technology Centre (ARTC) is a public-private partnership consortium of more than 80 industry members. Our core mission is to develop and deploy advanced manufacturing solutions and upskill the workforce to drive local industry competitiveness.

Smart Virtual Systems (SVS) Group is seeking a highly motivated Senior or Lead Research Engineer to implement highly available and scalable microservices-based applications and platforms for autonomous manufacturing applications. He/she is expected to be independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges. We are seeking a talented and experienced Software Engineer with experience in MLOps/AI to join our dynamic team. In this role, you will play a key role in software development and focusing on deploying machine learning models, implementing MLOps best practices. You will closely work with our cross-functional research teams to streamline model deployment, improve scalability and reliability of systems.

The key roles and responsibilities include the following:

-Develop, test, and maintain enterprise system and applications, with a focus in ML/AI systems.

-Implement MLOps best practices to automate model training, deployment, and monitoring processes.

-Optimize and Implement machine learning algorithms and deep learning architectures.

-Collaborate with data scientists and software engineers to integrate machine learning solutions into existing systems and deliver high-quality software products.

-Optimize AI pipelines for scalability, reliability, and better performance.

-Conduct performance analysis and optimization to improve model efficiency and accuracy.

-Stay updated on the latest advancements in software engineering, AI/ML technologies and best practices.

Job Requirements

-Bachelor or Master's Degree in Computer Science/Engineering or relevant Disciplines

-Must have a minimum of 8 years of experience as a Software Developer/Engineer

-Hands-on experience in Cloud Native Technologies such as in micro-services, DevSecOps, and Containerization Technologies

-Proficiency in designing and developing microservices and software systems using C# .NET, Python and angular

-A good understanding of CI/CD Pipelines in a distributed environment using Git, Artifactory, Jenkins, SonarQube, Docker registry, etc.

-Hands-on experience with deploying and managing microservices using container orchestration platforms (on-prem/public cloud)

-Can do attitude and happy to interface with multiple stakeholders

-Excellent troubleshooting, follow-through, and problemsolving skills, with attention to detail

-Excellent verbal and written communication skills

-Familiarity with deep learning architectures and natural language processing (NLP) techniques.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include operation of high-power lasers for cleaning related experiments, metal and composite sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. The roles and responsibilities include the following areas:

· Perform high-power laser material processing using robotics, CNC and hand-held systems on-site of ARTC and occasional visit to customer sites.

· Perform material testing, sample preparation, microstructure & defects analysis in fabricated coupons and parts.

· Tracking and managing lab resource utilization, procurement, and delivery.

· Storage space management and optimization.

· Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

· Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

· Assist in scheduling equipment utilization and procurement for project consumables.

· Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

· Identify and recommend improvement measurements to ensuring high quality in lab safety and 8S standards

Detailed Job requirements:

· Polytechnic/ Technical Diploma in Engineering

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Experience with high-power laser is preferred.

· 1-2 years of experience working in a lab is preferred.

· Strong attention to detail.

· Proficient in MS office.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts using polymer reinforced fiber composite materials.

RESPONSIBILITIES:

-Operate equipment to perform 3D printing and relevant post-processes (e.g. cam-based systems), mechanical charaterisation such as tensile, bending, compression tests and inspection (e.g., CMM) as part of the industry project.

-Responsible for generating jig and fixturing 2D/3D drawings for documentation and archiving purposes.

-Manage and work with local machining house for jig and fixture fabrication and assembly.

-Carry out routine maintenance, diagnostics checks and engage equipment vendors for preventive maintenance.

-Perform function testing to verify equipment readiness after maintenance or material change.

-Plan equipment schedule, maintain and improve lab environment. Manage raw feedstock and maintain stock/inventory list.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

JOB REQUIREMENTS:

-NITEC or Diploma in engineering related qualifications.

-At least 8-year work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry. Candidates with > 5-year experience will be considered for a senior role.

-Capabilities in CAD and 2D drawings using NX/SolidWorks, with knowledge in GD&T will be beneficial.

-Traditional methods of inspections such as CMM/handheld measurement tools and preparation of FAI documents is preferred.

-Familiarity in handling CAM based systems such as robotic system/CNC is an added advantage.

-Methods of processing and post processing of plastic parts such as prototyping of plastic parts and knowledge in fixture design for machining is preferred.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willingness to learn and adapt to new technology promptly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

WSHO Officer/ECO/ECMO

POWER PLANT@JURONG ISLAND

Health, Safety & Environment (Construction)

Full time

Job Descriptions:

· To assist the occupier of the workplace or other person in charge of the workplace to identify and assess any foreseeable risk arising from the workplace or work processes therein;

· To recommend to the occupier of the workplace or other in charge of the workplace reasonably practicable measures and safe work procedures to control & mitigate such risks to prevent incident occurrences;

· To assist in implementing & reviewing such measures or safe work procedures to prevent workplace accidents;

· To investigate any incidents/accidents and advise on the remedial measures to be taken to prevent any recurrence;

· To work closely with the relevant authorities on safety, health and environmental matters;

· To administer and implement an effective Environmental, Health and Safety Management System (EHSMS) in accordance with prevailing legislation and preparation for third-party external EHS audits;

· Conduct Environmental, Health and Safety Audits as per requirements;

· Making certain that all ordinances or orders bearing on occupational safety and health and environmental are complied with the governing laws;

· To prepare and conduct the EHS trainings for all employees which are identified in RA and SWP;

· Measure and monitor the WSH performance of the project and discuss WSH performance in the WSH committee meetings and recommend areas for improvement;

· Perform ECO and ECMO duties as assigned; and

· Be responsible for any other duties that may be assigned from time to time as your superior/management deem fit.

Job Requirements:

· Possess at least a Specialist Diploma in WSH and/or Bachelor’s Degree in Workplace safety and health (WSH)-related and certificate in ECO;

· At least 3 years of work experience relevant to the Civil & Infrastructure works to be carried out by a WSHO cum ECO; and

· MOM registered WSH Officer and NEA registered ECO + PUB registered ECMO.

The Human Resources Officer/Senior Officer reports to the Manager, Human Resources Branch. Based at the DAS Head Office in Jurong Point, he/ she will provide operational and administrative support for the Human Resources Branch.

The Human Resources Officer/Senior Officer performs a variety of tasks related to Human Resources including but not limited to:

• Assisting the HR Manager in identifying and developing policy and procedure updates/amendments in conjunction with best practice and local legislation
• Analyzing trends in compensation and benefits; researches and proposes competitive base and incentive pay programs to ensure the organization attracts and retains talent
• Review monthly payroll computations and reconciliations
• Managing and coordinating end to end recruitment process
• Handling staff onboarding and off boarding process
• Following up on staff confirmation
• Monitoring and following up on staff contracts, including re-employment
• Monitoring work pass expiry and submitting work pass application and renewal
• Managing student internships and teacher attachments
• Maintain employee data, records, and reports for HR projects and initiatives
• Monitoring MOE Instructor Registration applications and renewals
• Performing other duties as assigned

Requirements:

• Polytechnic diploma / Degree holder
• Candidates with relevant experience in Human Resource will have an advantage
• Knowledge of Employment Act
• Knowledge of Human Resource system
• Interpersonal skills, able to interact with all levels of staff
• Communication skills
• Accountability, ability to meet tight deadlines
• Good team player
• Ability to multi-task and adapt to changing work environment
• Ability to accept last minute changes in task assignment and/or arrangement
• Have good documentation practice
• Microsoft Office (basic)
• Online meeting platforms such as Zoom, Google meet etc
• Human Resource system

Applications details

All interested applicants are to submit the following as part of their application

1. DAS Employment Application Form, duly completed (form can be downloaded from the Careers page of our website)
2. Resume

Email the above submissions to [email protected] by 13 December 2024.

Due to the high volume of applications, only shortlisted candidates will be contacted for the next stage of the selection process. If you do not hear from us within two weeks of the application closing date, unfortunately, your application has not been successful. We appreciate your interest in the position.

Key responsibilities:

1. Packing Operations: Accurately pack products into containers or packaging according to requirements.
   
2. Quality Control: Inspect products for quality, ensuring they meet company standards before packing. Report any defective or damaged products to the supervisor.
   
3. Safety and Hygiene: Follow workplace safety and hygiene protocols at all times. Ensure packing areas are clean, organized, and free of hazards.
   
4. Equipment Handling: Operate packing equipment safely and efficiently.
   
5. Team Collaboration: Work effectively with team members to meet daily packing targets and deadlines. Communicate any issues or concerns to the supervisor in a timely manner.
   

We are looking for a Digital Marketing Associate to support our digital marketing initiatives for the brands under the Teamlink Marketing. This is an exciting opportunity for someone who is eager to work with data, analyze trends, and help optimize our digital campaigns. You’ll assist in managing online marketing strategies and track performance to drive growth.

Key Responsibilities:

• Market Research & Insights: Assist in conducting market research to identify trends and analyze competitors in the footwear industry.
• Campaign Reporting & Performance Tracking: Help track the performance of digital marketing campaigns (PPC, SEO, email), and assist in preparing reports to measure success and suggest improvements.
• Data Analysis: Analyse customer behaviour and market data to support the development of targeted digital campaigns.
• E-Commerce Optimisation: Collaborate with the team to optimise website performance, user experience, and conversion rates based on data insights.
• Paid Digital Advertising: Managing and optimising paid ads (Google, Facebook, YouTube, Tiktok, Marketplaces) for better targeting and improved campaign results.
• SEO & Email Campaigns: Help with SEO efforts and assist in managing email marketing campaigns based on customer insights.

Skills & Qualifications:

• Minimum of 3 years of working experience in marketing
• Experience in digital marketing, with a focus on data analysis and campaign performance.
• Familiarity with Google Analytics, Google Ads, and SEO tools.
• Good understanding of market research and the ability to analyse trends.
• Comfortable using Excel or similar tools to assist with reporting and data visualisation.
• Strong communication skills and a collaborative mindset.

About the role

• To elaborate the Master Production Schedule for our VAS Labelling Operation based on available capacity, customer deadlines and orders readiness.
• To support day-to-day planning activities (materials & resources) to ensure on time in full delivery (OTIF) of labelling workshop.
• To Identify, implement, and coach others in operations planning best-practice activities to achieve operations KPI’s with year-on-year improvement.
• To support Operation Manager with Continuous Improvement initiatives to ensure year-on-year improvement of Standard Productivities

What you will be doing

Operation Planning:

• Improve & develop ‘fit for purpose’ Labelling Master Production Schedule processes & tolls to ensure effective load versus capacity management, with the objective to improve coordination within services, improve OTIF KPIs and support Operation Manager in efficient resource deployment

• Ensure that procedures, processes & policies are deployed and followed within the Senior Leadership Team, encouraging best practice and a culture of Continuous improvement across all planning & materials management processes.

• Monitor and ensure compliance to planning procedures throughout Production Operations team

• Complete month end analysis of Operations/Planning performance and issue reports / KPI’s as required

Performance and CI:

• Support Operation Manager in analysing online performance and propose actions to improve the productivities

Team Management:

• Ensure and monitor team compliance to the Bollore’s Code of Conduct and Company’s regulations

• Ensure team understanding and implementation on Bollore’s Value in daily work behaviour

• Plan and monitor team performance including coaching and counselling needed to deliver expected outcomes

• Plan and monitor team development together with HR Division

• Coach and motivate staffs in cohesive and inclusive working environment to minimize staff turnover

• Ensure staff are correctly trained and supported during on-boarding period and that each new comer is feeling supported and part of the team

• Ensure updated Job Description availability for the team by coordinating with HR Division

• Ensure all changes in Department / Section communicated properly to the team

The successful candidate

• Diploma & Above
• 2-3 years of Operations experience
• Preferably in logistics related field, 3PL is preferred
• Ability to speak well confidently and build rapport with customers
• Good MS Excel skills
• Strong mentality and interpersonal skills

Job Description

1. To deliver prestigious frozen food products to supermarket chains, warehouses, food chains etc.
2. Maintaining product delivery accuracy, timely and customers oriented
3. Assigned of permanent reefer trucks for individual drivers

Job requirement

• Knowledge of Singapore roads and familiar with different supermarkets chain distributions system a plus
• Able to handle reefer trucks of at least 10" with experiences preferred
• At least 1 year on going driving experience in the same capacity
• Clean driving records, diligent with good working attitude
• Possess excellent communication and interpersonal skills
• A good team player and customer oriented
• Basic knowledge of daily reefer truck operational checks guided by transport supervisor
• Full CPF, OT's, incentives perks & performance Bonus etc
• Singaporeans may apply Only
• Able to start work immediately
• 5.5 days week

PM Group is an international project delivery company operating across Europe, the USA and Asia. We have a 43 year track record in project management, process design, facility design and construction management for leading multinational companies. We are now recruiting for Project, Process and Mechanical Engineer Intern in Singapore.

Job Summary

Project Engineer (intern)

• Support and assist the Project Managers in their duties and to carry out cost research and general department duties
• Develop and maintain collaborative relationships with our clients
• Have the opportunity to communicate with both internal and external stakeholders
• Learn on establishing project objectives in line with our clients and ensure goals and timelines are archieved
• Support in executing of projects via the PM Group Quality and Management systems
• Assist in projects technical and commercial delivery
• Train and learn to develop and implement appropriate project execution strategy(s) and maintain project budget
• Ensure compliance with local statutory and regulatory obligations

Process Engineer (Intern)

As a Chemical Engineering professional at PM Group, you will work as part of a multi-disciplined team on projects in the following sectors – Mission Critical, Pharma, Med Tech, Advanced Manufacturing, Food and Energy. Your work assignments will involve rotation through different projects, covering areas such as:

• Process Safety
• Process Plant Operation
• Process Optimization/Modelling
• Process Unit Operations
• Design Calculations
• Project Management

Mechanical Engineer (Intern)

• Prepare HVAC and Building Services basis of design documents
• Involve in equipment and personnel heat loads and generation of HVAC heat load calculations
• Coordinate with team members on preparing equipment list, schedules, datasheets and specifications for HVAC and Building Service equipment
• Learn & understand sub-contractor scopes of work for HVAC and Building Services

Office location: International Business Park (Jurong East)

Work arrangement: Hybrid - Work-From-Home & in office

Period: Jan to Mar/Apr 2025

Job Responsibilities:

• Oversee C&S design progress against schedule and budget on projects.
• Manage the interfacing with M&E contractors
• Coordinate with engineering consultant, review and comment its design drawings
• Monitor the design progress and statutory submission against project baseline program
• Implement corrective measures for identified distractions or issues.
• Review, negotiate and recommend for approval/disapproval on design change orders.
• Administer design subcontract including processing monthly invoices for payment.
• Coordinate and monitor status of design incentive/disincentive programs complying with provisions of design subcontract.
• Perform constructive reviews conforming design to prime contract requirements and proposal commitments.
• Coordinate and control design submittals for owner’s review and approval.
• Lead a design team for overall C&S and architectural design works, assist QS team for material takeoff and tendering, manage subcontractors and support site construction works
• Facilitate resolving design issues with owner.

Job Requirements:

• Degree qualifications in Civil and Structural Engineering
• Preferably 2 years of relevant expereince in the planning and design of major waste to energy projects or similar major projects
• Positive working attitude and ability to work in a fast-paced environment
• Well versed with C&S software

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scopes & Responsibilities

• Support NPI and Site projects as Engineering Technical Lead or Subject matter experts for process equipment
• Provide technical expertise in site selection assessment to identify equipment/facility gaps, select new equipment, assess layout/utilities capacity and partner project managers to develop project cost and schedule
• Perform assessment for equipment during new product introduction, change controls and other qualifications activities to ensure equipment are in its validated state
• Subject matter expert for process equipment performance and operation to ensure safety, compliance and sustained operation
• Lead and participate in technical transfer activities and cross-functional meetings
• Work independently and/or with project managers to complete engineering projects of various scales within schedule, budget and quality constraints
• Effectively manage and work with project CQV team to ensure timely delivery of projects
• Responsible for commissioning and qualification activities including FAT, SAT, PSSR, automation checkouts, IQ, OQ, PQ, and asset/preventive maintenance/spare parts creation for new process equipment
• Participate in the system walk-down, ensure the closure of punch items and support the takeover of the system from the project team
• Work closely with project managers to introduce new equipment including development of business case, project charter, user requirement specifications, quality risk assessments, conceptual design, preliminary design, design specifications and detail design
• Participate in design review and setup up of new asset and associated maintenance plan/spares in Maximo
• Work with research, manufacturing, process development, utilities, facilities, quality assurance and validation departments in developing requirements and recommendations for large and/or highly complex system/facility modifications
• Responsible for investigation of deviations, development of corrective and preventive actions and implementation of change controls in a timely manner
• Develop, implement and optimize maintenance and reliability activities such as preventive maintenance, job plan and datasheet development in Maximo
• Benchmark equipment performance (e.g., reliability, productivity) and determine improvement plans
• Periodically review and/or improve equipment safety, maintenance strategy, spare parts, and other continuous improvement opportunities to enhance reliability
• Responsible for management and oversight of team of CQV engineers
• Develop the best team by coaching and mentoring engineers to develop their technical competency and leadership skills

Qualifications

• Doctorate degree in Engineering OR
• Master’s degree in Engineering and 4 years of directly related experience in a pharmaceutical manufacturing site OR
• Bachelor’s degree in Engineering and 8 years of directly related experience in a pharmaceutical manufacturing site
• Able to work independently with minimal of no supervision
• Experience in managing various stakeholders expectations related to process equipment in biopharmaceutical
• Good communications skills, both oral and written, including presentation skills
• Good interpersonal and facilitation skills necessary to forge consensus among competing client interests while ensuring objectives are met
• Strong analytical skills and knowledge of industry trends to identify potential improvement opportunities. Ability to combine technical problem-solving skills with business acumen to determine best business solution
• Working knowledge of biopharmaceutical processes such as chromatography, buffer / media tanks, viral filtration, tangential flow filtration is preferred. Process knowledge on inoculation, bioreactors, harvest, single use technologies and critical utilities will also be considered
• Experience in validation processes such as generation/execution of Installation/Operation/Performance qualification documentation
• Knowledge in Automation systems and processes such as RD’s, Delta-V, BMS, ladder logic and PLC
• Demonstrated project management skills (schedule/cost development, facilitation, collaboration, basic project management, completion and follow-up) and application of concepts
• Problem solving skills requiring the application of scientific and engineering theory and calculations and creative skills in the development of hypotheses and approach
• Flexibility to work off-hours
• Knowledge of Total Productive Maintenance, Reliability Centered Maintenance concepts is an added advantage

Job duties and responsibilities:

• Design new products and continually improve existing products to meet industry standards and customer requirements.
• Develop technical manuals and Instruction Operating Manuals for products, ensuring accuracy and usability.
• Prepare, review, and verify design drawings, detailed specifications, and fabricated drawings for compliance with technical standards.
• Create Bills of Materials (BOMs) and ensure accurate documentation.
• Order materials and supplies; monitor the progress of fabrication and installation to ensure alignment with design specifications and schedules.
• Perform quality control checks to ensure the integrity of materials, components, and final products.
• Update and maintain design records, project databases, and documentation for traceability and reference.
• Track and coordinate the delivery of goods and materials to meet project timelines.
• Collaborate with cross-functional teams, including procurement, production, and project management, to address technical challenges.
• Provide technical support and guidance to the fabrication and installation teams during project execution.
• Identify opportunities for cost optimization, design innovation, and process improvement.

Job Requirements:

• Degree or Diploma in Mechanical, Precision, Tool, and Die Engineering, or a related field.
• At least 2 years of experience as a Design Engineer.
• Proficiency in drafting software such as AutoCAD, SolidWorks, 3D modeling software, or equivalent.
• Experience in Marine Hydraulic Applications, with knowledge of valves and actuators, as well as gear design (e.g., spur gear, planetary gear, bevel gear).
• Understanding of forging, casting, and precision CNC machining processes.

Description

工作地点： 西部， 文礼

每周 5 天，8am - 5.30pm可能需要加班。

职责

• 进行货物入库/检查和其他相关活动。
• 对本地和出口货物进行拣货、包装和出库活动。
• 处理货物的装卸、堆叠、存放、贴标签和包装。
• 确保遵守仓库标准操作程序和安全准则。
• 必要时进行盘点和周期盘点。
• 始终保持仓库的干净整洁。
• 执行其他相关的仓储职责或上级分配的临时工作。

要求

- 勤奋、有奉献精神

- 愿意学习并采取积极的态度

有兴趣的申请人，请 whatsapp 安排面试。

>> Whatsapp Julene @ 94721195

Company Description

Cogent Holdings Pte Ltd is a subsidiary of Cosco Shipping International (Singapore) Co., Ltd and has a wide range of clientele ranging from local SMEs to multinational companies. Cogent owns one of Singapore's largest one-stop integrated logistics hub, Cogent 1.Logistics Hub. It offers warehousing, freight forwarding, container and ISO tank depot, automotive logistics, and transportation services in Singapore. It also operates warehousing and container depot businesses in Malaysia.

Role Description

This is a full-time role for a Customer Service Officer at SH Cogent Logistics Pte Ltd. The Customer Service Officer will be responsible for day-to-day tasks such as processing shipping documentation, providing customer service to clients and ensuring smooth operations throughout the container haulage process.

1. Attend customer inquiries and ensure accurate capture of job requirements for all orders.

2. Advise customers on delivery schedules and inventory-related matters.

3. Maintain business relationships with customers and manage customer accounts at a higher level.

4. Communicate customer requirements to the Operations team for execution.

5. Create trucking jobs and monitor their progress to ensure deadlines or specified dates are met.

6. Create trucking jobs and monitor their progress to ensure deadlines or specified dates are met.

7. Handle all documentation and administrative duties, ensuring proper filing of invoices and job sheets.

8. Ensure the accuracy and precision of billing processes and maintain billing system data integrity.

9. Assist in accounts receivable processes, including billing, issuing invoices, debit notes, and credit notes.

10. Maintain and update inventory reports and undertake monthly account closings.

11. Support senior management by gathering data and figures for financial or relevant reporting.

12. Communicate and coordinate with appointed third parties regarding job orders.

13. Assist in permit declarations for job orders when required.

14. Assist in preparing ad-hoc quotations or commercial rate requests.

Requirements

1. Diploma or equivalent in logistics, supply chain management, business administration, or a related field.
2. Minimum 1 year of experience in customer service/ shipping documentation role in a 3PL company.
3. Strong knowledge of Hauler operations, transportation logistics, and customs clearance procedures in Singapore.
4. Excellent communication and interpersonal skills, with the ability to interact effectively with clients, colleagues, and external partners.
5. Experience with TradeNet is a plus.

Others Information:

1. Alternate Saturday
2. 2 ways transport from Jurong East MRT
3. Daily meal subsidy
4. In-house gym & entertainment room
5. Dental, medical, insurance benefits

Job Description :

• Assist in logistics arrangement.

• Perform daily duties including loading and unloading, picking and packing the goods according to the packing list prepared.

• Ensure cleanliness & maintenance of the vehicles, including regular servicing.

• Checking for the quantity and quality of goods receiving and send out.

• Perform warehouse housekeeping.

• Report to immediate superior when encountering problems in day-to-day operations.

• Perform ad-hoc duties assigned by immediate supervisors.

Requirements :

• Physically fit and proficiency in loading and unloading procedures.

• Valid Class 3 driving license.

• Responsible, keen learner with positive attitude.

• Ability to work independently.

• Familiar with Singapore route.

Job Highlights:

- Career growth opportunity

- Attractive remuneration and benefits package

Job Description & Requirements

• Prepare tender documents, cost planning and budget estimation
• Coordinate with contractors, suppliers and related parties
• Responsible for valuation of progress claims and variation orders
• Post contracts administration related to QS duties
• Carry out other contracts administration tasks

Experience & Skills

• Diploma in Civil Engineering / Quantity Surveying or equivalent
• Minimum 2 years relevant experience
• Good knowledge in pre and post tender administration
• Experience in managing subcontracting
• Experience with Glodon software measurement for tender is an added advantage
• 5 days work / week
  
  
  Interested candidate are welcome to submit your updated CV via APPLY
  
  Please indicate your current and expected salary and date of availability.

Job Description & Requirements

• Supervise and coordinate activities of workers
• Instruct workers in duties, safety procedures, and company policies
• Record information, such as production output, operating times, and labor costs
• Maintain quality control and production records
• Schedule work assignments and prepare work schedules
• Evaluate work performance, and recommend personnel actions, such as promotions, transfers, and dismissals
• Oversee maintenance of greenhouses and equipment
• Confer with other supervisors to coordinate activities of individual departments
• Perform other duties as assigned
• Experience in a production environment (Mechanical and Electrical works)
• Experience managing workers
• Knowledge of plant operation
• Ability to monitor and maintain safety protocols

Benefits:

• 5 days work week + 1 month 1 saturday
• Monday to Friday (8.45am to 5:30pm)

Job Description:

This is a contract role for a Customer Service Admin located in Tuas. Our client is one of the licensed warehouses, specialised in handling and storage of dutiable cargo like alcoholic beverages and tobacco.You will be responsible for interacting with customers through phone, email, chat, or in person to provide information about products or services, take orders, handle returns, and resolve complaints. It requires listening to customer concerns, investigating issues, and proposing timely and satisfactory solutions. Developing a thorough understanding of the company's products or services is essential to provide accurate information. Additionally, processing customer orders, entering them into the system, and ensuring timely delivery are key responsibilities. Using computer systems to access customer information, process orders, and respond to inquiries is also a vital part of the job.

REQUIREMENTS:

• Entry level are welcome
• No experiences required

Roles & Responsibilities:

• Provide administrative support in the areas of documentation, data entry, filing, reports for operations
• Liaise with customers for invoicing, payment, and delivery schedule
• Arrange delivery and collection schedules for drivers
• Other administrative works as assigned

Working hours:

• 5.5 days per week
• Monday - Friday; 9am - 6pm
• Saturday 9am - 3pm
• 1-hour lunch break per working day

Requirements:

• Able to speak English and Chinese
• Able to use a computer and Microsoft Words/Excel
• Responsible & hardworking
• 1-2 years of admin support experience
• Good customer service skills