Van Driver for Elder Care Centre (5 days work)

Responsibilities:

1. Ensure safety for all seniors during transportation to and from the Centre.

2. Assist seniors with boarding and alighting from the van with lifter.

3. To fasten safety belts & wheelchair securely for all seniors.

4. Keep vehicle clean and tidy all the time.

5. Keep proper maintenance of vehicle such as routine servicing, repairs etc & report if any issue.

6. To assist in running errands such as collects and dispatches goods or documents to and from the centre when necessary.

7. Attends to the general maintenance and repairs of the centre when necessary.

8. Performs any other related tasks or duties as required and assigned by the Centre Manager, Administrator & Board of Management.

Requirements:

1. A valid class 3 driving license.

2. A clean driving records.

3. Well route planning as and when with new client admit or discharge.

4. Knowledge of area roads and neighbourhoods (Jurong / CCK / Bukit Batok).

5. Familiarity with GPS application / Tech Savvy

6. Ability to remain calm in stressful driving situations (e.g. at rush hour)

7. Caring and Compassion towards elderly.

Please email your resume, stated with last drawn, expected salary & availability date to [email protected]

Job Description

• Prepare and Monitor project cost budget, cash-flow for project, track changes in design/construction work, check variations and adjust budget projections accordingly.
• Source and Liaise with Site Personnel, Suppliers, Sub-contractors, Consultants and/or Architects for all project-related matters.
• Responsible for Progress Claims, Variation Orders, Final Accounts and Sub-contractor Progress Claims.
• Work closely with the project team in the Analysis, Evaluation and Negotiation of quotations, so as to ensure timely award of sub-contractors and suppliers.
• Ensure timely finalization of main contracts and sub-contracts.
• Provide Support in any other ad-hoc duties that may be assigned time to time.

Job Requirements

• Candidate must possess at least a Bachelor’s Degree/ Post-Graduate Diploma/ Professional Degree in Engineering (Civil), Quantity Surveying or Facilities/ Building-related with a minimum of 3 years of relevant work experience.
• Have a positive working attitude, pro-active and meticulous in his/her work.
• Posses strong inter-personal communication & negotiation skills; able to work as a team.
• Able to work under pressure and meet tight deadlines, either independently or in a team environment.
• Location is at Neythal Road
• 5 days work week

1. Carryout servicing, repair, overhauling and installation jobs being assigned.
2. Provide job quotations to customer.
3. Provide technical support to after sales service.
4. Diagnose errors or technical problems and determine proper solutions
5. Carryout final inspection of jobs.
6. Carryout housekeeping and maintain workshop equipment and tools.
7. Build positive relationships with customer​s

Join Our Team at the School of Physical and Mathematical Sciences, Nanyang Technological University, Singapore

The School of Physical and Mathematical Sciences (SPMS) at NTU Singapore hosts research and education activities in two divisions: Division of Mathematical Sciences (MAS) and Division of Physics and Applied Physics (PAP). MAS covers diverse topics ranging from pure mathematics to the applications of mathematics in cryptography, computing, business, and finance. PAP covers many areas of fundamental and applied physics, including quantum information, condensed matter physics, biophysics, and photonics. Over the years, SPMS has attracted talented individuals from around the world and Singapore to join as scientific leaders and researchers.

Position Available: Research Fellow (Engineering/Physics)

The laboratory of Yijie Shen at the School of Physical and Mathematical Sciences is seeking to hire a research fellow with a solid theoretical background in optical angular momentum, particularly in vortex light fields, who has also conducted relevant research in this area. The research fellow will focus on two main aspects: 1) theoretical research on optical transverse angular momentum, and 2) the generation, measurement, and application of light fields carrying angular momentum or certain polarization states in long pulses.

Optical transverse angular momentum represents a cutting-edge topic in the field of optics. In the past three years, it has garnered significant attention and extensive research within the scientific community, with related work frequently published in top-tier journals. However, the theoretical understanding of optical transverse angular momentum is still in its infancy. The current theoretical frameworks remain unclear and lack solid foundations, with considerable discrepancies in its definition and calculation. Therefore, advancing its theoretical research is crucial, and this is expected to become a prominent research direction in optics in the coming years.

Additionally, experimental work on vortex light fields can also be pursued. While the generation and study of light beams carrying longitudinal angular momentum are already well-established, research on the generation and measurement techniques for light pulses carrying both longitudinal and transverse angular momentum is still in the early stages. Moreover, exploring potential applications of these light fields remains an open frontier. Theoretical studies involving optical vortices in pulses and ultrafast optics require further development to establish a comprehensive research framework.

Key Responsibilities:

• Conduct theoretical research on optical transverse orbital angular momentum, focusing on its definition and calculation
• Develop methods for numerical simulation for optical longitudinal and transverse angular momentum or generating and measuring light fields carrying longitudinal and transverse angular momentum. Investigate the practical applications of these light fields, such as using them as detection signals in various scenarios (e.g., interactions with different material interfaces)
• Work on the generation and measurement of long pulses with modified power spectrum and explore their applications in the field of communications
• Publish high-quality research papers to contribute to the advancement of knowledge in the field

Job Requirements:

• PhD degree in Engineering, Physics or related areas, with focus on optical angular momentum, optical vortex
• Experience in theoretical research for vortex beams, vector vortex beams and longitudinal/ transverse orbital angular momentum
• Strong written and verbal communication skills in English is essential to conduct research
• Knowledge in classical electromagnetic theory/ quantum dynamics/ optics
• Background in one or more of the following topics: optical angular momentum, ultrafast optics, optical vortex
• Proficiency in scientific computation in C/C++ and MATLAB

The College of Science seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

We regret to inform that only shortlisted candidates will be notified.

Nanyang Technological University’s ANT Group – NTU Joint Lab is a collaboration between ANT International and NTU. The partnership will explore privacy-preserving methods for large language models (LLMs) and will be overseen by a joint research committee.

We are looking for a Research Engineer II to involved in research and development collaboration with industry, on AI Safety and Trust Technology, especially on the topic of applying fully homomorphic encryption in privacy-preserving machine learning. The successful applicant is expected to be familiar with fully homomorphic encryption and its applications in AI models.

Key Responsibilities:

• Research and development of trust technologies such as privacy-preserving machine learning which are important components of digital trust platforms.
• Be involved in privacy-preserving machine learning and fully homomorphic encryption system development and implementation.
• Assist in preparation of reports and scientific papers.

Job Requirements:

• Master’s degree in computer science, mathematics, information theory or related field
• Participation in privacy, security, and trust related conferences and journals
• Good programming skill, preferably with experience in implementing cryptographic algorithms.
• Be familiar with the following programming languages: C/C++
• Good communication skill, self-motivated, and could deliver under tight schedule

We regret to inform that only shortlisted candidates will be notified.

JOB SUMMARY:

Manage the crewing function to identify, recruit, retain and develop a sustainable, compliant and cost effective crew pool.

DUTIES AND RESPONSIBILITES :

• Recruit, evaluate and hire vessel crews for the fleet and open and close Articles of Agreement in a cost effective manner
• Create and maintain personnel files for crew members and ensure crew member files contain comprehensive and current documentation of crew credentials in a timely manner
• Develop and maintain a crew credential tracking matrix
• Develop and maintain an organized plan for efficient crew changes for crew members that ensures continuity of vessel operations and good harmony and relations with crew members
• Provide advice on crew wage and benefit matters when requested
• Monitoring and closing out of crew P&I costs and medical updates
• Supervise manning agencies to ensure Company requirements and policies are fulfilled
• Liaise with agents and vendors on immigration and work permit issues for crew members entering foreign countries to ensure all local laws and regulations are followed
• Assist with crew appraisals and competency reviews
• Organize and supervise crew travel and local logistics to ensure efficient and safe travel of crew from home destinations to vessels
• Provide weekly and monthly reports to senior management on crewing matters and issues
• Obtain information and remain fully informed on local legal and regulatory requirements on matters that may affect crew members, including immigration rules and procedures, local social tax issues and insurance matters
• Assist with crew relations and communication when required
• Undertake audit on manning agencies when necessary

JOB SUMMARY:

Manage the crewing function to identify, recruit, retain and develop a sustainable, compliant and cost effective crew pool.

DUTIES AND RESPONSIBILITES :

• Contacting ex-seafarer for redeployment
• Sourcing / recruiting / check & verify seafarers’ certificates and arranging for interviews of senior officers with the respective department heads
• Liaise with crew agents and port agents for crew joining/repatriation, including the booking of flight and visa / work permit application
• Checking & ensure seafarer’s certificates / medical check-up for compliance to Charterer’s requirements / matrix
• Checking of seafarer’s certificate authenticity with the relevant authority and application for Flag State license
• Proper maintaining & update seafarer files certificates / document’s expiry / SEA contract / crew appraisal / crew change plan
• Extension of crew’s entry pass and crew landing pass with the immigration authority
• Declaration of immigration clearances and outward port clearances
• Apply & update of crew article, including the crew sign-on/off
• Provide weekly and monthly reports to senior management on crewing matters and issues.
• Supervise / audit manning agencies to ensure Company requirements and policies are fulfilled.
• Monitoring and closing out of crew P&I costs and medical updates
• Obtain information and remain fully informed on local legal and regulatory requirements on topics that may affect crew members, including immigration rules and procedures, local social tax issues, and insurance matters.
• Member of the Shore Base Emergency Response Team to coordinate with ERT members local or overseas for medical arrangements and inform NOK as necessary.
• Undertake any other Adhoc duties/projects as assigned by Management/Company.
• Oversee and supervise peers on their daily tasks
• Prepare DOC audit under crewing elements

CANDIDATE PROFILE / REQUIRED COMPETENCY

• Working knowledge of international Maritime rules and regulations
• Pleasant personality and communicate effectively with all nationals
• Good written, verbal communication and interpersonal skill
• Organized, patient and attentive to detail and accuracy
• Able to work in a fast pace environment & able to travel in short notice

EDUCATIONAL QUALIFICATIONS / ACCREDITIONS:

• Min Diploma / Degree in any field
• Relevant Experience in Crewing function in offshore company for at least 5 years
• Knowledge of STCW / MLC regulations is desirable
• Familiarity with flag state regulations for Malaysia and Singapore flagged vessels is desirable

Job Description & Requirements

• Managing and checking on daily order send via email by the customer.
• Manage and creating the order and generating the pick slip from WMS or perform system transaction in customer’s system. SAP, Oracle etc.
• Ensure all the orders are shipped on time and transaction are being done correctly to meet the KPI.
• Ensure all orders are handover to warehouse for pick and pack.
• Liaise with internal teams (e.g., warehouse and traffic teams) to ship the orders out on time.
• Liaise with external teams (e.g., Forwarders, couriers).
• Perform daily shipment booking with the forwarders and preparing the AWB in courier services’ system.
• Ensure the information printed on the AWBs are declared correctly. (Shipper, Ship to, Value, Bill to account, Inco term etc.)
• Ensure the permits are booked timely and correctly.
• Follow up on internal and external customer’s request promptly to ensure all the orders are shipping on time.
• Maintain a good relationship with the customer.
• Prepare the necessary reports (daily activity, receiving and shipping) to be submitted to customer as per requirement.
• Follow up on internal and external customer’s request promptly.

Requirement

• At least 2 Years of working experience in the related field is required.
• Reporting Supervisor on the daily activities.
• Oversee respective or assigned operation activities to maintain accuracy, completeness and on time delivery.
• Determine priorities and work assignments to meet shipping schedule.
• Follow up on internal and external customer’s request promptly.
• Work in fast paced environment with minimal supervision.

JOB RESPONSIBILITIES

• Achieve growth and hit sales targets by successfully managing the sales team
• Design and implement a strategic business plan that expands company’s customer base and ensure it’s strong presence
• Own recruiting, objectives setting, coaching and performance monitoring of sales representatives
• Build and promote strong, long-lasting customer relationships by partnering with them and understanding their needs
• Present sales, revenue and expenses reports and realistic forecasts to the management team
• Identify emerging markets and market shifts while being fully aware of new products and competition status

JOB REQUIREMENT

• Previous experience as a sales representative or sales manager, consistently meeting or exceeding targets
• Demonstrated ability to communicate, present and influence credibly and effectively at all levels of the organization
• Ability to drive the sales process from plan to closee

WAGO Group is an international, standard-setting supplier of electrical interconnection, automation, and electronic interface products and solutions. This family-run company is the world market leader in spring pressure connection technology. Whether in industrial, railway, or energy technologies, in the marine and offshore sectors, or building and lighting management, WAGO products and solutions provide safety and efficiency.

WAGO has been represented in Singapore with a wholly owned subsidiary for over 25 years and has a well-established local infrastructure.

WAGO started setting up an R&D Competence Center in Singapore in 2023 to better cope with the rising global market demand. The new R&D Competence Center operates within the already existing infrastructure in Singapore.

The new R&D Competence Center in Singapore focuses on the business areas of sensor technology and power electronics, which serve the industry, energy, building, and green mobility sectors.

We are looking for someone who enjoys and has experience in the mechanical design of industrial electronic products.

Roles & Responsibilities

• Responsible for planning, conceptualizing, and creating mechanical designs for electronics and power electronics products.
• Create and review technical drawings, plans, and specifications using Siemens NX.
• Collaborate with multi-disciplinary engineering teams to complete design for manufacturing (DFM) and design for assembly (DFA).
• Work with vendors and contractors efficiently to ensure timely completion of deliverables.
• Conduct thermal simulation and analysis using industrial software for development.
• Generate working prototypes for beta testing and customer demonstration, including 3D printing.
• Develop prototype testing processes, and perform testing and verification of new designs.
• Perform detailed documentation to track project development and design process.
• Manage BOM creation and maintenance within the PLM (Product Lifecycle Management) system.
• Ensure the project timeline is met and the project stays within budget.

Qualifications & Competences

• Bachelor's degree in mechanical engineering, or related technical discipline.
• Minimum of 5 years of relevant work experience.
• Sound knowledge of GD&T (Geometric dimensioning and tolerancing)
• Extensive experience using CAD software such as Siemens NX, Creo, or similar.
• Familiar with state-of-the-art 3D printing technology for prototyping purpose.
• Experience and knowledge of Industrial Design (ID) would be an advantage.
• Knowledge of FEA (Finite Element Analysis) would be an advantage.
• Knowledge and experience with special plastic molding techniques, especially overmolding or ultrasonic welding, would be an advantage.
• Ability to communicate effectively and clearly.
• Self-motivated and a great team player.

What can we offer:

• Exciting and diversified duties and responsibilities await you within a dynamic, international company environment that is experiencing sustainable growth.
• We provide you with a platform where you can further develop your passion and technical competence and onboard an exciting industry, and market-oriented career.
• We offer you an attractive, performance-related payment package. We focus on an efficient, process-oriented organization, where the individual responsibility and self-organization of our employees as ‘entrepreneurs within the company’ are particularly advanced.
• The company is one of the globally leading players in the connection and automation technology space offering to its customers innovative high-tech solutions.

Job Highlights

• Vehicle can be driven home
• Annual leave/Medical leave
• AWS/medical & dental benefits

Job Description

Working location: 47 Jalan Buroh, Singapore 619491

Responsibilities:

• Delivery of bakery products to supermarkets/convenience stores and other assigned outlets
• Merchandising display of products

Requirements:

• Possess Class 3 driving licence
• Experience in driving box truck preferred
• Able to commence work from midnight/early morning
• 6 working days - Including weekend & PH

Benefits:

• Annual leave/Medical leave/AWS/Medical & Dental benefits
• Vehicle can be driven home, season parking/ERP claimable

WALK-IN INTERVIEW:

Sunshine Bakeries

47 Jalan Buroh #08-03 (South Lobby) Singapore 619491

Monday - Friday (9am - 4pm)

Tel: 6257 8455

The National Institute of Education invites suitable applications for the position of Research Assistant on a 12-month contract at the Science of Learning in Education Centre.

Project Title: Investigating the neurobiological mechanisms of cognitive load - A neuroimaging and brain stimulation approach.

Project Introduction:

We are seeking an energetic research assistant with background in neuroscience, psychology, and/or exercise science join our team exploring the neurobiological mechanisms of cognitive load using a combination of neuroimaging and brain stimulation techniques.

Singapore is facing a rapidly aging population that is compounded by a low national birth rate and longer life expectancy of our residents. It is expected that by 2050, approximately 25% of the Singaporean population will be over the age of 65 years, which poses significant challenges in healthcare and socioeconomic domains (National Population and Talent Division., 2023). Older adults often experience cognitive aging and decline, including reduced memory, processing speed, and attention, which can negatively impact their quality of life and independence (Lustig et al., 2009). These deficits in executive functioning are a result of structural and functional brain changes that results in the brain becoming less efficient in supporting attentional demands to day-to-day activities (Cox & Deary, 2022). A key theory in cognitive aging is that older adults experience greater cognitive load (Cognitive Load Theory, CLT) during task performance compared to younger adults that is due to inefficient neural processing (Prince et al., 2024; Sweller, 1988). Cognitive load theory posits that the brain has finite working memory capacity to attend to cognitive tasks, and an overload of information will result in a deficit in learning or allocation of attentional resources to deal with cognitive task (Sweller & Chandler, 2009). Thus, as the brain ages and becomes more inefficient in processing and allocating attentional resources to deal with complex tasks, the likelihood of successful task performance, particularly in situations with time pressures, is negative affected. This project will address the following research questions:

1. What is the relationship between cognitive load, neural activity, and vascular response in young versus older adults during simple and complex cognitive task performance?

2. Can non-invasive brain stimulation modulate the neural and vascular responses to cognitive load, and improve cognitive performance in older adults?

Requirements:

• Bachelor’s degree in psychology, cognitive neuroscience, sport science, or related fields, with;
• Relevant research experience.
• Strong verbal communication and writing skills.
• Expertise in Microsoft applications (Word, Excel, PowerPoint)
• Basic knowledge of statistics and SPSS.
• Able to work independently and in teams with minimal supervision.
• Able to work well with children and adolescents.
• Proactive, energetic, and keen to learn.
• Reliable and able to manage concurrent tasks in a timely manner.

Responsibilities:

• Conduct literature review.
• Assist in participant and stakeholder management within school contexts.
• Assist in the administration and management of project and intervention.
• Assist with behavioural and neurophysiological data collection, processing, and analysis.
• Assist in writing of reports and journal articles.
• Maintain and document research records.
• Facilitate coordination and training of student assistants.
• Other tasks as assigned by the Principal Investigator.

Application

Applicants (external and internal) will apply via Workday. We regret that only shortlisted candidates will be notified.

Workday Job Requisition ID: R00019607

(https://ntu.wd3.myworkdayjobs.com/Careers/job/NTU-Main-Campus-Singapore/Research-Assistant--Science-of-Learning-in-Education-Centre---NIE-_R00019607)

Closing Date

Closing date for advertisements will be set to 14 calendar days from date of posting.

Job Responsibilities:

• Process customers orders, prepare delivery orders and invoices (May range up to 100 POs per day).
• Assist Accounts Executive to prepare monthly reports for billing.
• Organize, maintain, and file paper and digital files and records.
• Attend to phone calls and emails enquiries.
• Other duties as assigned.

Job Requirements:

• Min Diploma or equivalent.
• Preferably with 1 year of accounts/administrative experience.
• Proficient in MS Office (Excel, Word).
• Able to work well independently and in team.
• Meticulous, good organisation and multitasking skills.
• Willing to support OT as and when required.
• Currently position is for 5.5 days, but Saturday can have flexible arrangement.

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Familiar with AUTOCAD Software.

• 5 days, Tuas, Transport provided
• Salary: $4000 - $5500, AWS, performance bonus, allowances
• Opportunities for professional development and career advancement.
• Supportive work culture that values collaboration, innovation, and employee well-being.

Responsibilities:

• Build and maintain strong, long-term relationships with key clients in the energy sector.
• Understand client requirements and propose customized solutions to address their needs.
• Identify new business opportunities and contribute to revenue growth within existing accounts.
• Collaborate with the sales team to develop and execute effective sales strategies.
• Leverage your technical expertise to communicate and simplify complex engineering concepts for clients.
• Lead client negotiations to establish mutually beneficial agreements that align with business goals.
• Work closely with internal teams, including engineering, project management, and support functions, to ensure the seamless delivery of products and services.

Requirements:

• Possess a Bachelor’s Degree in Mechanical or Electrical engineering.
• 2-4 years of experience in key account management or business development within the Oil & gas/Marine industry
• Candidates with no experiene can apply
• Strong technical acumen with the ability to understand and explain complex engineering concepts.
• Good communication and interpersonal skills.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

· Arranging and managing the employee’s work schedules, considering seasonality for occasions and peak times.

· Maintaining records of staff members which includes their salaries and working schedules.

· Advertising and promoting services, offers, and discounts via social media.

· Monitoring stock and ordering products as and when required.

· Tracking the payments received from clients.

· Maintaining records of all transactions.

Requirements

· 5 yrs working experience in similar role.

· Excellent knowledge of bookkeeping and accounting procedures.

· Ability to handle customers’ requests and complaints with elegance.

· Excellent oral and written communication skills.

· Strong organization and analytical skills.

· Exceptional customer service skills.

· Strong negotiation and sales skills.

· Proficiency in Microsoft Office.

· Customer-oriented individual and an outstanding problem-solver.

· Good numerical abilities.

· A keen eye on details.

· Good time management skills.

· Exceptional leadership skills

. Must be able to work night shift or split shift
. Must be able to work extra hours or weekend if needed

Observing all company safety and quality regulations.

Reporting accidents, safety violations, or other concerns.

Assisting in planning and improving processes and product quality.

Working with other team members to complete the production process.

Requirements:

At least 5 yrs experience in a related field may be required.

Basic computer skills.

Strong verbal and written communication skills.

A desire to work with team members to improve processes and product quality in a fast-paced, physically demanding environment.

Must be able to work night shift or split shift
Must be able to work extra hours or weekend if needed

Addcel has been delivering deep value to clients across the Oil and Gas, Petrochemical, Energy, Pharmaceutical, Data Centers, Environmental Solutions and Infrastructure industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation such as structural steel, piping, storage tanks & silos as well as the equipment installation, we take pride and passion in all that we do.

The Sales/Business Development Executive reports to the Director and is responsible for the below

• Communicating with clients closely to identify their needs and requirements.
• Preparing and delivering sales presentations to create sales opportunities.
• Relationship building with current and potential clients.
• Developing and presenting proposals for client’s business needs.
• Ensuring customer service with regular client follow up.
• Overseeing the sales lifecycle from prospecting to closing of contract.
• Innovating and overseeing the sales process for the business to attract new clients.
• Identifying and exploring opportunities that come up in new and existing markets.
• Review opportunities and challenges in accordance with the Company’s direction.
• Communicate with multiple internal stakeholders clearly and accurately on client requirements.

To be successful, you will need the below:

• Good Communication skills.
• Sales and Target driven
• Energetic

Responsibilities:

• Lead line leaders and operators to achieve daily production targets, quality, productivity, and yield.
• Conduct daily pass-down meetings and escalate any line issues.
• Manage manpower, overtime, and consumables planning.
• Ensure adherence to manufacturing and safety procedures.
• Train and coach leaders and operators to enhance performance.
• Implement improvements to minimize human errors.
• Maintain discipline and good housekeeping in the production line.
• Collaborate with departments on projects, evaluations, and preventive maintenance in the fab.

Requirements:

• Diploma and above in Engineering or equivalents.
• Minimum 2 years of working experience in a related industry.
• Experience in high-tech, high-volume manufacturing environment is preferred.
• Strong leadership and communication skills.
• Willing to work 12-hour shifts (permanent day or night, as assigned).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

The S. Rajaratnam School of International Studies (RSIS), a Graduate School of Nanyang Technological University, Singapore, is a leading research and teaching institution in strategic and international affairs and policy-oriented think-tank in the Asia-Pacific region. The School invites applications for the following tenure-track position:

Assistant Professor / Associate Professor

in the following specialization:

International Political Economy

RSIS seeks to recruit a mid-career scholar at the Assistant Professor / Associate Professor level. Applicants should be able to conduct interdisciplinary research pertaining to international political economy with a focus on Asia-Pacific. A relevant PhD and a good publication record commensurate with the level of appointment are essential requirements. Experience in policy-relevant research and publication would be useful.

The successful candidate will join the school’s Centre for Multilateralism Studies and International Political Economy Programme. He/she is expected to contribute to and play an active leadership role in the School's and Centre’s teaching, research, and think-tank work streams, which may involve:

• Teaching up to three (3) courses and supervising graduate students in the School's Master of Science and PhD programmes
• Conducting individual and team research as well as policy-oriented projects
• Teaching in and organizing short executive programmes
• Organizing conferences, seminars and events
• Engaging and managing the School’s relationships with diverse stakeholders

The initial appointment will be for four (4) years, with further contracts to be considered by the relevant School Reappointment Committee.

All applicants should submit the following:

• A cover letter specifying how your qualifications match the job description;
• A detailed curriculum vitae (including records of competitive grants, fellowships, and graduate supervision, if applicable);
• Statements of research and teaching interests and teaching evaluation;
• Three (3) published articles or writing samples;
• Contact information of at least 4 referees of the rank of Professor;

We regret that only shortlisted candidates will be notified.

For further information about RSIS, please visit our website at: www.rsis.edu.sg

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Ideate, prioritize, and define requirements based on market and customer insights.
• Analyze trends, assess technology, and generate product concepts.
• Define competitive positioning and USP.
• Execute NPD plan within timelines, aligning Scrum teams via Agile.
• Source manufacturers, liaise with formulators, and ensure regulatory compliance.
• Conduct efficacy, safety, and stability tests with manufacturers.
• Finalize product specs, labels, and packaging with relevant teams.
• Research pricing, create costing data, and present to management.
• Provide technical support to Marketing and conduct product training.
• Monitor industry trends, competitor actions, and product performance.
• Manage product improvements and corrective actions with manufacturers.
• Ensure compliance with standards and support company goals with additional projects.

Requirements:

• Degree in Nutrition/ Chemistry/Pharmacy or equivalents.
• Minimum 1 year of experience in product development or management within dietary supplements or health food.
• Proficient in product/project management, with strong planning and time management skills.
• Resourceful, analytical, and effective at problem-solving.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities

• SHMS Implementation: Administer and maintain an effective Safety and Health Management System (SHMS) as per regulations and prepare for external audits.
• EHS Audits: Conduct Environmental, Health, and Safety audits as required.
• Compliance: Ensure compliance with occupational safety, health, and environmental laws and regulations.
• EHS Training: Prepare and deliver EHS training for employees based on Risk Assessments (RA) and Safe Work Procedures (SWP).
• WSH Performance Monitoring: Track Workplace Safety and Health (WSH) performance and discuss in committee meetings.
• ECO Duties: Perform Environmental Control Officer (ECO) responsibilities as assigned.
• Earth Control Measures: Implement and oversee Earth Control Measures (ECM) according to QECP designs, ensuring compliance during construction and monitoring their effectiveness with QECP assistance.
• Maintenance and Inspections: Conduct site inspections and oversee maintenance programs.
• PUB Clearance: Obtain clearance to start work by submitting QECP-endorsed ECM plans to the Public Utilities Board (PUB).
• ECM Installation: Oversee ECM installation on-site in line with the approved plan.
• WSH Act Compliance: Cooperate with safety procedures, report unsafe acts, and avoid tampering with safety devices.

Requirements:

• Possess a Specialist Diploma in WSH or a Bachelor's Degree in a WSH-related discipline.
• At least 3 years of relevant experience in ECO and ECMO roles.
• Hold a valid Environmental Control Officer (ECO) certification.
• Registered with both NEA and IES.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Role and Responsibilities

• Ability in leading of Project Team to achieve excellence in the project.
• Plan and manage project schedule to ensure project completion according to schedule.
• Manage subcontractors’ activities to ensure compliance with contract requirements.
• Monitor compliance of work with workplace safety and health regulations.
• Monitor the quality of project delivery to make sure they meet project requirements and regulations.
• To implement control measures on material / plant & equipment / utilities usage.
• Supervise daily site activities.

Job Requirements

• Degree in Civil / Structural / Building Engineering
• Completed 2 Projects as Project Manager in Residential Condo, Residential Development
• Min 3-5 years relevant experience.
• Computer skill- Using Microsoft Project, Excel, Word & Power Point etc.
• Certificate of Project Manager
• Microsoft Project