Job Summary:

The candidate will be performing lab experiments on variable water chemistries, analyze water quality parameters and run membrane reverse osmosis skids to evaluate membrane performance. The job will also require evaluation and characterization of chemical recipes, and performance validation via a set of lab standard protocols (preliminary on-the-job training will be provided).

Essential Duties & Responsibilities:

1. Design of experiment:

• Evaluate the efficacy of developed formulations/products for various scales following lab protocols.
• Plan antiscalant experiments using membrane flow-cell (with synthetic and real process water solutions).

2. Performing the experiment:

• Carry out the experiment with good lab practices and housekeeping.
• Troubleshoot experimental failures, identify and propose solutions to overcome the failures.

3. Data Analysis:

• Identify patterns and/or correlations from the experimental data.
• Analyze the data and provide recommendations for improvements.

Skills/Experience/Education Required:

• Technical background, diploma/degree in Chemistry/Chemistry Engineering/Environmental Engineering
• Experience in water chemistry or water testing would be a plus.

Job Specifics:

• Ability to work with high energy in a start-up-based environment and multitask, if required.
• Exceptional communication and presentation skills to convey ideas and technical information effectively across an entire range of audiences.
• Curiosity and strong drive to improve status-quo while working in a semi-autonomous environment.

Job Description:

• Daily inbound/outbound order handling
• Communicate with customer on issue arise on order & inventory
• Verification of invoices from suppliers
• Posting of all transactions in Warehouse System
• Weekly operation/KPI report data preparation
• Prepare monthly reports for billing

Job Requirements

• Min. 1 year administration experience
• Proficient in MS Office
• Independent and able to work well with minimum supervision
• Must be willing to work overtime on weekdays and weekend OT will be on rotational basis between the teams (except during stock take or special project)

School of Electrical and Electronic Engineering is one of the founding Schools of the Nanyang Technological University. Built on a culture of excellence, the School is renowned for its high academic standards and research. With over 3,000 undergraduates students and 1,000 graduate students it is one of the largest EEE schools in the world and ranks 10th in the field of Electrical & Electronic Engineering in the 2024 QS World University Rankings by Subjects.

Today, the School has become one of the world’s largest engineering schools that nurtures competent engineers and researchers. Each year, the School graduates over a thousand students who are ready to take on great ambitions and challenges.

For more details, please view: https://www.ntu.edu.sg/eee

Prof Addison Wang Lin at the School of Electrical and Electronic Engineering (EEE) at NTU is looking for two Research Fellows. Join an innovative and dynamic research team led by, where you will push the boundaries of bio-inspired artificial intelligence and advanced sensor technologies for embodied AI research. As a postdoctoral researcher, you will have the unique opportunity to work at the intersection of cutting-edge science and real-world application, developing groundbreaking algorithms and systems that mimic natural processes to elevate the capabilities of robotic systems.

In this role, you will engage in transformative projects that utilize multimodal sensor fusion and spatial intelligence, driving advancements with meaningful implications for smart healthcare, personalized education, and interactive human-AI agent interaction experiences. You will collaborate with a talented, interdisciplinary team that values creativity and innovation, allowing you to share your insights and contribute to high-impact publications that enhance the global scientific community. Your role will not only advance your own research career but also empower you to mentor and inspire the next generation of researchers.

Key Responsibilities:

• Research Development: Design and conduct experiments that explore novel approaches in bio-inspired AI and sensor technologies, integrating insights from biology and neuromorphic engineering for embodied intelligent systems.
• Algorithm Design: Develop and optimize algorithms for sensor fusion, perception, and spatial intelligence, tailoring solutions for specific applications in robotics and healthcare.
• Prototype Implementation: Lead the implementation of prototypes using advanced sensor technologies, ensuring effective integration with robotic systems for real-world applications.
• Data Analysis: Analyze experimental data and develop models to validate theoretical approaches, utilizing machine learning techniques to derive meaningful conclusions.
• Collaborative Projects: Engage in collaborative research with interdisciplinary teams, contributing expertise in bio-inspired systems and robotics to advance cutting-edge solutions.
• Publications and Presentations: Produce high-quality publications in peer-reviewed journals and present research findings at international conferences to enhance the visibility of the research team and institution.
• Mentoring: Provide guidance and mentorship to graduate students and interns, fostering a collaborative and innovative research environment.
• Grant Writing and Funding Proposals: Assist in the preparation of grant proposals to secure funding for ongoing and future research projects.

Job Requirements:

• PhD in AI, electrical engineering, computer science, automation and robotics engineering, mathematics/physics, computational neuroscience/biology or related field.
• Strong research experience or research publications records in AI-related (or interdisciplinary field) top-tier conference and journals (such as CVPR, TPAMI, ICRA, RAL, TRO, Nature Machine Intelligence).
• Proficiency in programming languages commonly used in AI and robotics (e.g., Python, C++, MATLAB).
• Excellent project management and leading skills. Experiences of writing research/fund proposals are required. Budget management experiences would be a plus.
• Good communication, mutual respect/care, and team-leading spirit are required.
• Respect of multi-cultural research environment.

We regret to inform that only shortlisted candidates will be notified.

JD and responsibilities: -

• Prepare monthly full sets of accounts including GL, TB, P&L, BS and audit schedule.
• Prepare management report including monthly sales margin report, product category profit margin report, business segment report, individual sales performance report and production output report.
• Oversee 2 Assistants (1AR & 1AP/stock) and assist in operation to ensure smooth functioning.
• Oversee AR credit control.
• Prepare and e-file quarterly GST return.
• HR duties including MOM work pass application (>70 Foreigners), monthly payroll and submit CPF e-submission, yearly Auto-Inclusion, issue employment letters.
• Submit and renew Form D cost statement
• Liaise with external parties including Bank’s Account Manager, Auditors, Tax Agents and company’s Corporate Secretary.
• Any other ad-hoc duties assigned by Managing Director and Executive Director

Requirements:

• Minimum 5 years of working experience.
• Diploma and Bsc above
• Competent in Microsoft Office eg excel and familiar with accounting system Nav and payroll Financio will be a plus.

Job Responsibilities:

• Able to identify and hunt for new regional contract logistics (warehousing) business opportunities
• Achieve sales targets set by Department Head
• Ad-hoc duties assigned when required

Job Requirements:

• At least 4 years of working experience in sales, must be from 3PL logistics with regional exposure
• Advantageous if have strong network and ready customers to bring in
• Excellent interpersonal skills and the ability to influence others.
• Open and comfortable with cold calling to find customers

-Work Location-Toh Guan office

-100% hunting sales role (focusing only on Contract Logistics)

-sourcing for only 3PL FMCG, retail, high-tech business

The Senior Engineer, Projects, will lead and manage projects from initiation to completion, ensuring alignment with scope, budget, and timeline requirements. This role involves overseeing mechanical and electrical components' fabrication, assembly, and installation while coordinating with cross-functional teams to meet project objectives.

Responsibilities

• Lead projects, ensuring timely delivery, adherence to scope, and budget compliance.
• Oversee fabrication, assembly, and installation of mechanical and electrical components.
• Coordinate with factories, contractors, and cross-functional teams to align objectives.
• Review and interpret mechanical drawings, specifications, and technical data.
• Ensure fabrication adheres to layouts and designs.
• Collaborate with the procurement team to ensure timely material delivery.
• Conduct quality checks, testing, and inspections to maintain standards.
• Resolve technical issues and implement corrective actions.
• Planned and coordinated with after-sales teams to ensure smooth workflows.
• Maintain project documentation, including progress reports, Gantt charts, and technical records.
• Supervise inbound and outbound activities.
• Inspect parts to ensure compliance with BOM and data sheets.

Requirements

• Degree or Diploma in Mechanical Engineering or related field.
• 5-7 years in a similar role or industry.
• Proficiency in AutoCAD, Microsoft Office Suite, and project management tools.
• Knowledge of mechanical systems, equipment, and industry standards.
• Strong analytical and decision-making abilities.
• Ability to manage multiple projects simultaneously.
• Detail-oriented with excellent problem-solving skills.
• Strong communication and coordination abilities.
• Preferred candidates should have access to a vehicle.

Basic Information

• 5 Days : 8.00am - 6.30pm
• Basic up to $2.5k
• AWS + VB
• Located at Loyang

Job Scope:

• Data entry
• Processing of local orders
• Checking of freight and courier charges for customers
• Other administrative tasks

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified**

Zen Career Pte Ltd | 24C2559
Ang Jia Hong (Cody) | R24126406

Responsibilities:

• Responsible for the daily procurement of all goods
• Sourcing of suppliers from local and overseas
• Liaise with requestors from project teams and suppliers
• Preparation of Purchase Orders
• Preparation of supplier’s monthly purchasing report
• Maintenance approved vendor list
• Perform clerical duties in Purchasing department

Job Requirement:

• Min "o" Level and above
• Required skills in MS office
• Min 2 years relevant working experience
• Proficient in Chinese is a must (in order to liaise with the Chinese speaking associates)
• Process excellent communication and interpersonal skills
• Able to start work on short notice
• Can process the required logistic jobs

JOB DESCRIPTIONS AND REQUIREMENTS

Schutz Singapore Pte Ltd is a subsidiary of Schutz GmbH & Co, KGaA, Germany - a leading manufacturer of composite Intermediate Bulk Container and HDPE drums for the filling, storage and transportation of liquids.

We supply our Packaging systems to many of the world's leading chemical, petrochemical, Petroleum, Food & Beverage and Bio-Chemicals manufacturers throughout South East Asia and rest of the world.

Our Singapore plant is seeking a professional personnel who is driven by a strong passion to succeed to fill the vacancy of Sales Manager

KEY RESPONSIBILITIES AND ACCOUNTABILITIES :

• You will be directly responsible for the growth of sales of all SCHÜTZ Packaging System products and services in the designated region with a particular focus on the development of ECOBULK IBC and F1 Drums.
• To achieve greater market penetration of SCHÜTZ product and services across Singapore and surrounding locations by achieving & exceeding agreed sales targets, through development of new customers.
• You will represent SCHÜTZ in the regional market in a professional and ethical manner. To gain respect in the general market place for our firm as the supplier of choice for quality packaging solutions.
• To gain knowledge and understanding of developments in the industrial packaging market in the designated region, including the activities of our competitors, to better achieve sustainable sales growth.
• Develop, maintain and strengthen relationships with customers and to identify market trends, needs and opportunities and translate them into business success.
• Set challenging targets, effective measures and development activities for the sales teams.

REQUIREMENTS:

• Minimum Degree holder in Chemical/Mechanical/Industrial Engineering or a related discipline, with keen interest in Sales & Marketing.
• 2-3 years experience, preferably in Sales and Marketing role of an Industrial product. Serving customer in the following industry segments Chemicals, Food, Petrochemicals or Petroleum segments.
• Must have strong communication and interpersonal skills.
• A result-oriented, responsible and self-driven person.
• Possess good business acumen and a good track record in sales.
• A self-disciplined individual who possess a positive attitude and is willing to learn and a team player.

- Salary will commensurate with relevant experience.

Benefits Summary

• Healthcare Division
• Basic Up $3000 + Commission
• Attractive Commission Remuneration
• Jurong East
• Monday to Friday Office Hour
• Training Provided

Job Responsibilities:

• Sourcing for potential candidates for clients
• Candidate engagement
• Collaboration with stakeholders

Requirements:

• Minimum Diploma
• Willing to learn
• Good team player, able to communicate effectively

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested candidates kindly click the APPLY NOW.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified. **

Chanel Loh Su Fui

Registration Number: R22110419

EA License No: 06C2859 (MCI Career Services Pte Ltd)

Benefits Summary

• Healthcare Division
• Basic Up $3000 + Commission
• Attractive Commission Remuneration
• Jurong East
• Monday to Friday Office Hour
• Training Provided

Job Responsibilities:

• Sourcing for potential candidates for clients
• Candidate engagement
• Collaboration with stakeholders

Requirements:

• Minimum Diploma
• Willing to learn
• Good team player, able to communicate effectively

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested candidates kindly click the APPLY NOW.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified. **

Chanel Loh Su Fui

Registration Number: R22110419

EA License No: 06C2859 (MCI Career Services Pte Ltd)

Job Duties & Responsibilities

• Operate Reach Truck
• Operate Forklift
• Unloading cargo from incoming vehicles and stacking them to assigned places
• Scanning Cargo
• Moving cargo to pallets for storage
• Identify damage and report shortage of cargo
• Count physical inventory and maintain inventory control
• Weekly/monthly stock check
• To highlight to supervisor any problems encountered in the course of their duties
• Comply with company policies and guidelines
• Assist in keeping a safe working environment

Job Requirements

• Must possess a reach truck license
• Regularly lift and/or move objects
• Experience as a reach truck operator is required

Working Hours

• 5.5-day work week
• Mon – Fri: 8.30am – 5.30pm
• Sat: 8.30am – 12.30pm

Job Benefits

• Opportunity for OT
• Positive & friendly work environment
• Company T-Shirt provided

Performance Standards

• No complaints from direct superior
• Good communication, organisation and time-management skills
• Reliable employee
• Good attitude and cooperation (teamwork)
• Be initiative and a team player.

Interested applicants may WhatsApp message +65 8298 2374 to schedule an interview.

Perform diagnostic analysis of the network system, identify possible faulty devices, troubleshoot faulty modules, troubleshoot network problems and outages and prepare necessary documentation detailing actions taken.

-Monitor system performance and track usage and develop and deliver a trend analysis of system load, usage and response.

-Monitor the reachability of all connections within the network adhering to circuit restoral priorities and initiate troubleshooting to restore full network capability.

-Analyze system functions and failures to isolate and define problem area

1. Analyze recruitment needs, plan and execute recruitment strategies to attract top candidates, and identify suitable candidates to align perfectly with our business requirements.
2. Familiar with work pass processes—application, issuance, renewal, and the occasional cancellation.
3. Arrange security bonds and dormitory for new and exisiting employees.
4. Knowledgeable in foreign embassy procedures, visa and passport renewals.
5. Arrange repatriation for our work pass holders.
6. Understand local employment laws and work-pass intricacies.
7. Administer Work Injury Compensation (WIC) claims, facilitate work-injury special pass applications and cancellations.
8. Familar with HRMS systems.
9. Manage Primary Care Plan for work-pass employees and assist with employee medical benefits.
10. Maintain personnel files and keep our HR network folders tidy.
11. Help management during the annual appraisal process.
12. Liaise with Training Centres to arrange courses.
13. Familiar with payroll administration.
14. Review and renew company insurance policies, licenses, and memberships.
15. Dive into our HR policies - provide suggestions and improvements

1. To be able to service all types of motor vehicles.

2. To perform diagnostic check and troubleshooting for fault

3. To be able to repair aircon system

4. To be able to remove/refit/repair/replace undercarriage

5. To remove/refit dashboard to facilitate repairs when necessary

6. To repair auto transmission

7. To communicate/advise clients when required

Benefits:

• Basic Salary up to $2,250 with yearly increment based on performance.
• $100 monthly allowance + $50 transport allowance provided
• 5 days work week | Monday to Friday 9am to 5:30pm
• Company Transport provided
• Dental & Optical reimbursement

Job Description:

This is a contract role (12 months) for a Warehouse Assistant located in Pioneer. Our client is Freight forwarding service in Singapore, you will be taking the responsible on for managing the flow of goods within the warehouse, ensuring smooth operations from receiving to dispatch. This includes tasks like checking and storing inbound items, picking and packing outbound orders, and preparing cargo for shipment. They also handle value-added services such as repacking, cleaning, and performing minor maintenance on spare parts. Inventory management is a key part of the role, involving regular cycle counts, stock assessments, and minor rework on pallets or products as needed. Additionally, they ensure all documentation and processes comply with the company’s internal controls and standard operating procedures. Maintaining a clean, safe, and organized warehouse environment is essential for this role

Qualifications:

• Possess a Forklift License.
• Minimum 1 years’ relevant working experience.
• Can physically move up to 20kg
• Generally required to walk a lot
• Comfortable in non-aircon environment

Responsibility：

As a Lorry Driver, need to responsible transport goods from location to location. You have to follow delivery routes and schedules as assigned. Conduct inspections of vehicle before departing to deliver goods. Besides that, according to the purchase order, prepare the delivery order 1 day in advance for delivery the next day.

Job Description:

*Ensure the customer receives the goods in good condition.

*Delivery purchase to clients on time and collect payments and issue receipts.

*Providing excellent customer service, answering questions and handling complaints from clients.

*Loading, Unloading and transporting items to clients in a safe, timely manner.

*Able to carry heavy goods, roughly 25KG - 40KG for load and unload.

*Responsible for daily routine checks and maintain the general cleanliness of the vehicle.

*Obeying the rules of the road and following company safety regulations.

*Ensuring that vehicles have sufficient gas and are always ready for use.

*Reporting any accidents or delays in immediately.

*Follow food safety and quality regulations.

*Follow Manager and team leader instructions to completed the task and improve task in good service.

Requirement：

*At least 2 Year(s) working experience and related field are required for this position.

*Must possess at least higher Education/ Diploma in any field.

*Possess a Singapore Class 3 driving license or able to take Class 3 Driving License.

* Familiar driving on Singapore roads or able to use GPS

*Strategic & critical thinking as well as decision-making and negotiation skills.

*Able to adapt, prioritize, exercise initiative, manage pressure, multi task and work independently.

*Excellent customer service skills, including communication skills, problem solving skills, organizational skills and teamwork spirit.

*Time management/ meticulous and mature in work.

* Flexibility working time, able to work overtime.

*Sunday, Public Holiday needs working.

Benefits:

• Basic Salary up to $3,200 with yearly increment based on performance.
• 5 days work week (Monday to Friday, 9am to 6pm)
• Company Transport provided
• Our company emphasises on good career progression.

Job Description:

This is a full time role for a After Sales Executive located in Tuas. Our clients serve the Asia region. Supplying such as Marine Engines, Industrial Power Equipment, Energy System, Engineering Services and Spare Parts in Singapore. The role focuses on managing export shipments, including preparing commercial documents such as invoices and shipping paperwork, coordinating with the warehouse team, and arranging shipments with external vendors like freight forwarders. It also involves handling Letters of Credit, processing purchase orders, and issuing shipping instructions across various regions. Key responsibilities include negotiating delivery costs, monitoring inbound shipments, tracking logistics expenses, and addressing claims related to shortages or defective parts. Additionally, the role requires preparing reports and handling other assigned tasks as needed.

Qualifications:

• Nitec & above
• 3 years of relevant experience

Benefits:

• Basic Salary up to $6,000 with yearly increment based on performance.
• 5.5 Days (Monday to Friday, 8am to 5pm)/(Saturday, 8am to 12pm)
• Our company emphasises on good career progression

Job Description:

This is a full time role for a Senior Service Engineer (Ship Cranes) located in Jurong East. Our company is an international crane & deck machinery repair specialist and offers crane and deck machinery related repair services and parts supply to the Merchant Marine- and Offshore industry and you will be responsible for field service tasks, including troubleshooting and repairing deck cranes, grabs, windlasses, hatch cover hydraulics, and davits.

Qualifications:

• Min 5 years' experience sailing as Electrical Officer on bulkers equipped with deck cranes and has carried out troubleshooting and repairing Marine Cranes, Windlasses & other hydraulic systems on board,
• In-depth knowledge and understanding of PLC controlled electro-hydraulic cranes & hydraulic machinery.
• Able to read and comprehend electric and hydraulic diagrams.
• Able to independently troubleshoot electrical, hydraulic and mechanical problems.
• Able to supervise a team of mechanics and carry out large repair projects as Lead Engineer on board, on voyage and in Ship Yards.
• Able to write technical reports and able to communicate with owners' representatives.
• Previous employment as service engineer with one of the leading deck crane manufacturers will be an added advantage.
• Experience with variable frequency drives (VFD) will be an added advantage

Responsibilities:

• Designs, plans, and handles testing, commissioning, software programming and supervision on site for BMS on project plan, specifications, and contract documents.
• Analyses plans, specifications, and contract to determine project requirements.
• Prepares submittals containing schematics, descriptions and technical literature as required. Maintains current design documents throughout project duration.
• Prepares engineering re-estimate reports and minimizes report variances.
• Perform testing & commissioning of BMS.
• HVAC experience and sequence of preparation for BMS
• Experience in BMS technical submittals preparation, method of statement, compliance statement and OMM.
• Experience in IO point schedules, assignments and materials selection with value engineering
• With logical knowledge in ACMV & HVAC system control logic.
• Network and MS office & project background knowledge is a must.
• Be aware of all kinds of risks and their controls in your work environment.
• Be a part of site EHS inspections, hazard/ risk assessments and recommend mitigation measures.
• Immediately inform the site EHS officer/site manager of any additional EHS risks.
  Stop the work if any unsafe conditions are identified.
• Project management skill required.

Requirements:

• Degree/ Diploma in Mechanical/ Electrical engineering or its equivalent

• Min 2 years related experience in HVAC/ BAS industry

• Strong customer management & problem solving skills

• Excellent communication & interpersonal skills

Task Management

• Develop and implement a comprehensive product quality improvement plan, aligned with the organization'soverall goals and objectives.
• Lead and participate in cross-functional teams to identify and analyse root causes of quality issues.
• Developing and implementing corrective and preventive actions to prevent future quality issues.
• Monitoring and reporting on product quality metrics to track progress and identify areas for improvement.
• Conduct audits and assessments to identify and address potential quality risks.
• Collaborate with suppliers to ensure their products meet our quality requirements.
• Collaborating with various teams such as engineering, manufacturing, classification societies, and suppliers to ensure consistent quality throughout the product lifecycle.
• Stay up-to-date on the latest quality improvement methodologies and tools.
• Track and analyse warranty data for reporting, change implementation to new products and continuous improvement
• Identify and communicate process and product improvements.
• Continually seek to identify areas of quality risk and resolve them before they impact on the vessel.
• Delivery of regular communications & reports to the Key internal relationships.
• Establish and maintain high standards of quality and control of cost within budget limits.
• Carry out customer familiarization of our products.
• Occasional travel to vessels country operating area to conduct fact finding on their operations and acceptance of our products in operation for quality.

Interpersonal Management

• Communicate effectively: This involves actively listening, clearly conveying information, and providing constructive feedback with all levels of staff.
• Build trust and rapport: This involves being genuine, respectful, and reliable.
• Ensure liaison with shipyard personal and management to ensure product quality performance is consistent with the aims of the organization.Develop and maintain key external relationships with partners, customers, contractors, suppliers and official
• bodies and organisations.
• Negotiate on behalf of the company, be able to accept realistic compromises when necessary.
• Develop a strong network of industry suppliers, subcontractors, and contacts.

Information Management

• Develop and manage quality improvement documentation and reporting.
• Develop full understanding of vessel/product specifications and performance.
• Develop full understanding of relevant classification and survey body rules that affect the quality performance of our products.
• Manage warranty claim documentation and continuous improvement feedback documentation to the shipyard.
• Personal Management
• Look for opportunities to continue to develop professionally.
• Show personal accountability for the achievement of objectives.
• Keep up to date with the industry best practice and monitor actions of competitors.

Position Overview

We are seeking a dedicated and detail-oriented Quality Assurance Specialist to assist our Quality Assurance Manager. The successful candidate will be responsible for performing a full spectrum of quality-related activities and developing/reviewing quality and inspection plans

Education / Certificates

Degree in Engineering, Science, or a related field.

Job Responsibilities

• Conduct First Article Inspection (FAI), Dedicated Product Release Verification, and material review.
• Develop and review quality and inspection plans.
• Manage quality-related activities with customers and internal staff, including handling customer rejects, product defects, and non-conforming materials.
• Perform product and system audits for both in-house and vendor operations.
• Participate in continual improvement initiatives.
• Perform other duties and responsibilities as assigned

Requirements

• Minimum of 2 years of experience in Quality Management.
• Knowledge of AS 9100 / ISO 9001 Quality Management System requirements.
• Proficiency in Geometric Dimensioning & Tolerancing.
• Experience with product inspection methods.
• Knowledge of Coordinate Measuring Machine (CMM) applications is an advantage.
• Strong understanding of Quality Statistical Tools and Methodologies such as Cpk, SPC, GR&R, and Six Sigma tools.
• Proficient in writing quality manuals and procedures.
• Ability to lead and/or perform Internal Audits.

• Cyber security service
• Basic $2800 - $4200
• Mon-Fri (8.30am-6.00pm)
• Working location: Jurong East area
• Company transport provided: Jurong East, Choa Chu Kang

Responsibilities

• Identifying potential markets, industries, and business opportunities.
• Analyzing competitors, market trends, and customer needs to inform strategic decisions.
• Maintaining and nurturing relationships with existing clients to ensure satisfaction and repeat business.
• Addressing client inquiries, resolving issues, and managing expectations.
• Preparing and presenting updates to stakeholders on business development activities, progress, and strategic initiatives.

Qualifications

• Diploma/ Degree in Cybersecurity, Computer Science etc
• No working experience are also welcome.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

We are an equal-opportunity employer and value diversity among our teachers, staff and students.

At One World International School (OWIS), we are looking for passionate, adaptable educators who enjoy teaching students from diverse cultures. OWIS provides an individualised approach to learning that nurtures every aspect of child development. In addition to versatile learning spaces and a variety of extracurricular activities, we offer rigorous curricula that prepare students to be future innovators and leaders. We're an IB Primary Years Programme (PYP) World School, a Cambridge International School and an IBDP School. All teaching positions require a high proficiency in spoken and written English, a degree, teaching qualifications and ICT literacy.

If you are looking to work with enthusiastic students from around the world, we invite you to submit your application and become part of our dynamic school community.

Overall Responsibilities:

• To teach and educate students according to guidelines provided by the school’s curricular programmes - Secondary, IGCSE and IB Diploma.
• To teach and educate students according to the educational needs, abilities and attainment potential of individual students entrusted to his/her care by the Head of School.
• To promote the attributes and attitude of the IB Learner Profile and the school values.

Includes the below but not limited to -

• Teach across the whole age range, including Secondary, IGCSE and IB Diploma.
• Design, prepare and deliver lessons to teach knowledge, techniques, support and enhance each learner’s understanding.
• Collaborate with colleages to ensure that every learners' individual needs are catered for through differentiated planning, learning engagements and assessment opportunities.
• Assess and monitor the progress of learners and set goals for improvement, including writing students reports and attending parents meetings.
• Lead or be involved in extra-curricular activities, school events, assemblies, staff trainings, meetings, etc.
• Promote the health, safety and wellbeing of all students.

Requirements:

• Minimum two (2) years or more relevant full-time teaching experience as a qualified teacher.
• Candidate must at least possess Bachelor's degree and a Professional Degree in Teaching/Teaching qualification certificates (PGDE, PGCE, PGCEi, NIE Diploma)/Valid Teacher License/QTS.
• Strong knowledge and experience of teaching Science for Secondary, IGCSE and IB level preferred.
• Experience in an international school environment (preferred).
• A passionate educator with the ability to deliver student-centred, inquiry based learning.

Working Location: Nanyang Campus (Jurong West)

Why Join Us?

• Attractive Newcomer Bonus
• Career Progression & Development Opportunities
• Opportunity to Work Alongside an Innovative Team

Job Descriptions:

• Lead/manage a team of Quantity Surveyors in the administration and review of procurement and contract management
• Review contract documents and providing cost estimates on tenders
• Prepare and monitor project cost budget, cash-flow for project, track changes in design/construction work, variations and adjust budget projections accordingly
• Oversee and manage main contract progress claim and subcontract payment including variation claim
• Resolving contract disputes and contract claims, assessing entitlement for extension of time and loss/expense claim
• Able to independently lead/manage large scale project
• Manage record keeping for all contract-related correspondences and documentations
• Communicate contract-related information to all stakeholders
• Ensure timely finalization of main and subcontract

Job Requirements:

• Bachelor’s Degree in Quantity Surveying / Construction Management / Civil Engineering or related fields
• Minimum 5 years relevant experience in contract negotiation, administration and/or management
• Excellent communication and negotiation skills, analytical mindset, problem solving abilities, as well as keen interest and motivation in a high growth and entrepreneur environment
• A high level of integrity, dependability with a strong sense of urgency and result oriented