Requirement

1. Someone who has experience in managing and operating an advanced technology plant.
2. Someone who has experience communicating closely and directly with senior management and managing day-to-day plant operations.
3. Someone who has experience in setting up a factory specializing in playing cards for casinos.
4. Someone who is familiar with quality requirements for playing cards for casinos.
5. Someone who has quality control skills for playing cards for casinos and is familiar with security requirements from casino.
6. Someone who has more than 20 years of experience in a factory producing playing cards that meet the quality requirements of casinos.
7. Someone who is able to manage the progress of production plans and achieve target.
8. Someone who has overcome many difficult situations in the past, and when encountering difficult situations, able to think about how to overcome it without giving up.
9. Someone who can demonstrate leadership and has ability to obtain cooperation not only from direct reports, but also from various departments.
10. Someone who can abide confidentiality.

Task

1. We are looking for someone who can impart technology and knowledge to the local employees so that in the near future local employee will be able to take the lead in production
2. As head of our plant, you will manage the entire plant.
3. You will be responsible for identifying the aptitude of employees and assigning employees based on the right person to the right job principle.
4. You are required to plan the appropriate number of personnel according to the production volume.
5. You will be responsible for investigate root causes of problems that occur daily, and implementing a cycle of hypothesis, implementation, verification, and improvement.
6. You will be responsible for coordinating the entire process.
7. You are responsible for sharing and collaborating with overseas group factories regarding problems with machines and other equipment, as well as points for improvement in production.
8. You will be responsible for leading the workplace safety and health management (including 5S) of the entire plant.

• Oversee and monitor daily operation activity to ensure efficiency and continuous productivity
• Manage daily operation budget and expenses
• Manage daily manpower deployment schedule and duties assignment
• Represent management and assist supervisor to communicate and rectify daily work matter with client's management as required
• Prepare daily operation performance report inclusive of risk assessment (if required)
• Ensure that all protocol and safe work procedures are adhered by all staff on site daily

Job requirements:

• Physically fit and healthy
• Possess good communication skills and can-do attitude
• Willing to work on public holiday or rotating shift , if required
• Possess Forklift operator license or certification will be an advantage
• Certification on risk assessment and workplace safety will be an advantage
• Must be able to work night shift and split shift
• Must be able to work extra hours or weekend if needed

Responsibilities:

• Determining business needs via consultation, business analysis, and targeted observations.
• Assesses existing SAP operation process and recommending improvements.
• Provides support for difficult and complex system environments.
• Provides SAP system support, assistance, and end-user training.
• Performs role of trouble-shooter, successfully identifying system inconsistencies and implementing optimum business solutions and business process enhancements.
• Involved in business analysis and technical design session with business and technical staff to develop requirements document and ETL specifications.
• Performs role of supporting business and operation needs such as audit and compliance, both internal and external, etc.
• Strengthens organizational capability and build downstream domain knowledge through facilitation of knowledge transfer sessions for employee.
• Keeping abreast of the latest SAP offerings, updates, and developments.
• Experienced in analysing and identifying SAP Service Pack impact, preparing release notes for transport, preparing FFID log and other SAP logs.
• Performs rigorous documentation of SAP processes and presenting progress reports.

Requirements:

• Bachelor's degree in Information Technology, Computer Science or related disciplines
• Minimum 5-6 years in experience as a SAP consultant in a similar industry and in Financials, Controlling and Project System modules.
• Intensive knowledge of SAP S/4 HANA and FIORI.
• Excellent teamwork, collaboration, interpersonal, and communication skills
• Experience in planning, analysing, designing, developing, testing, implementing, documenting, and training in S/4 HANA Financials, Controlling and Project System will be an added advantage
• Excellent organizational and time- management skills
• Effective communication with business users and vendors
• Ability to work under business focused and fast-moving environment
• Always projecting a positive outlook in a fast-paced, sometimes stressful environment
• Possesses SAP-accredited certification

Our Addresses and Working Hours:

Seatrium Limited

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

Mon - Thu: 8.00am - 5:15pm

Fri: 8.00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job description

• Collection / delivery of cars to customers
• Handle customers’ enquiries professionally
• Clean and groom cars efficiently
• Handle customers’ feedback and keep supervisor informed accordingly
• Manage all aspects of aftersales services, including maintenance, repairs, and customer support which includes complaints and feedback.
• Oversee the vehicle repair process, ensuring timely, cost-effective and high-quality repairs.
• Performing ad-hoc administrative duties.
• Valid Class 3 license with a minimum of 3 years of driving experience.
• Able to commit to 5.5 days workweek (Saturday) 9am to 6pm (mon to sat) (9.30am to 2pm Sat )
• Good & safe driving record

Location: Various Condominium sites in Singapore
Working Hours: 2.5 to 3 days per week from Mon to Sat

Job Overview

We are looking for a dedicated and skilled Part-Time Landscaper to join our team, responsible for maintaining the landscaping at various condominiums in Singapore. The ideal candidate will have a passion for outdoor work, gardening, and ensuring that landscapes are well-maintained to enhance the aesthetic appeal of our client properties.

Key Responsibilities

• Landscape Maintenance: Perform general landscape maintenance tasks including grass cutting, pruning, hedge trimming, and weeding.
• Plant Care: Ensure the proper care of plants, shrubs, and trees, including watering, fertilizing, and replanting when necessary.
• Garden Design Assistance: Assist with planting seasonal flowers and designing small landscaping projects as directed by the property manager or team leader.
• Irrigation System Maintenance: Monitor and maintain irrigation systems to ensure water efficiency.
• Waste Management: Collect and dispose of organic waste (leaves, branches, etc.) in accordance with environmental standards.
• Safety Compliance: Follow safety procedures and guidelines when operating machinery and handling chemicals.
• Customer Service: Provide friendly and professional interaction with condominium residents and address any concerns or inquiries about landscaping.

Requirements

• Experience: Prior experience in landscaping or gardening is preferred but not mandatory; training will be provided.
• Physical Stamina: Ability to work outdoors in various weather conditions and perform physically demanding tasks.
• Attention to Detail: Strong attention to detail in maintaining gardens and green spaces to a high standard.
• Knowledge of Tools: Familiarity with landscaping tools and equipment such as lawnmowers, hedge trimmers, and leaf blowers is an advantage.
• Flexible Hours: Must be able to work on a flexible schedule, including saturdays, as required by the condominium's needs.
• Teamwork: Ability to work independently as well as part of a team.

Responsibilities:

• Support the Project Director (PD) in project functions, including project management, site management, and risk control to achieve project goals.
• Lead and mentor the project team by setting guidelines, providing advice, and supervising as needed.
• Oversee all project management activities from planning and coordination to completion within budget, schedule, and quality standards.
• Assist PD in compiling project progress reports (e.g., Monthly Report, VO Management, EOT Assessment, Project Progress Updates).
• Monitor the project schedule and manage daily operations, setting short- and long-term goals, coordinating with other contractors.
• Conduct technical reviews to ensure contract compliance and adherence to completion timelines.
• Liaise with clients, consultants, and contractors, attending regular meetings to ensure project progress.
• Supervise site labor and subcontractors, resolving construction issues as they arise.
• Oversee quality control, safety, and EHS practices on-site, identifying high-risk activities before construction and approving Method Statements.

Requirements:

• Degree in Civil Engineering or equivalent, recognized by the Singapore Professional Engineers Board (PEB).
• At least 10 years of experience in the construction industry.
• Experience in LTA, roadworks, MRT, and viaduct projects.

_____________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Industrial Trends & Insights: Analyze market trends, data, and customer insights to generate ideas for NPD.
• Product Positioning: Define competitive positioning and unique selling propositions (USP).
• NPD Leadership: Oversee the entire NPD process, from concept to completion, including reformulations.
• Cross-functional Collaboration: Lead efforts with Regulatory, Marketing, Supply Chain, Manufacturers, R&D, and Quality for timely product delivery.
• Supplier Liaison: Source and coordinate with contract manufacturers and formulators; serve as the main contact for NPD discussions.
• Formula & Compliance: Review formulations and ensure ingredient/design compliance with regulations.
• Product Testing: Ensure understanding of product challenge tests, stability, and compatibility studies.
• Costing & Pricing: Research market prices, generate product costing, and propose pricing.
• Product Introduction: Conduct product training for marketing teams and sales leaders.
• Post-launch Management: Analyze product performance, manage feedback, and provide technical responses.
• CAPA Response: Address corrective and preventive actions raised by Quality.
• Standard Procedures: Contribute to and implement standard procedures aligned with industry and QMS standards.
• Other Duties: Perform additional tasks and projects to meet company goals.

Requirements:

• Degree in Cosmetics, Chemistry, or a related field.
• Minimum of 2 years of working experience in product development or management within the cosmetics or skincare industry.
• Preferred Candidates with an interest in marketing within beauty, skincare, personal care, or similar industries is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Information :

Working Hours : Mon~Fri 8:15am to 5:45pm

*Might required to work onboard the vessel and travel occasionally.*

Responsibilities :

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Requirements :

1. 2 years QA Experience in Marine or Industrial

2. Diploma in Electrical Engineering or ITE with relevant experiences

3. Able to speak Chinese

4. Required to work onboard the vessel and travel occasionally.

Interested candidate can send in your resume in Microsoft Words, along with a picture of yourself to :

[email protected]

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Carol Tan

EA License No.: 23C1894

EA Personnel No.: R24121972

Support Operations Supervisor in operating the chemical processing plant to ensure quality product and to meet business targets.

Key Responsibilities:

• operate, monitor process equipment to ensure that the process is operating within defined conditions and product specifications
• work with Operations DCS Technician to deal efficiently and effectively with any deviation in process parameters to ensure “Zero” safety and environment incident
• patrolling, inspection of field equipment and data logging
• Perform - routine sampling of process and conduct analysis - housekeeping and PPM of assigned area - loading / unloading raw material - minor maintenance
• prepare plant equipment for release to maintenance crew
• perform inspection and audit to meet corporate safety and local legislation guideline
• Be a member of the Site Emergency Response Team

The Candidate should have:

• Diploma in Chemical Engineering or related discipline or
• NITEC/Higher NITEC in Chemical Process Technology, with minimum 2 years of relevant working experience.
• 2-5 years field operations experience in a high hazard chemical plant, with DCS experience would be advantageous
• Preferable to have a Boiler Attendant 1st grade (preferred) or 2nd grade and/or Steam Engineer 1st grade (preferred) or 2nd grade.
• Commitment and adherence to safety systems
• Strong analytical thinking, practical problem-solving and good communication skills
• Conversant with World Class SHE and Operational principles relevant to operation of high hazard plant
• Ability to work effectively in a multi-discipline and multi-cultural team in a high pressure environment
• Good command in English and computer literacy
• Able to perform shift work
• Diploma holders who just graduated from relevant discipline are welcome to apply

* SUPERVISE TEAM OF WORKERS;

* RECOMMEND CHANGES AND SAFETY AT SITE;

* REQUISITE OF RAW MATERIALS WHEN REQUIRED;

* UPDATE DRAFTER ON WORK PROGRESS N UPDATE OF DRAWING;

* OBSERVE AND IMPLEMENT SITE SAFETY AT SITE;

* ENSURE WORKERS ADHERE TO SITE SAFETY ESPECIALLY ON SAFETY HELMETS AND HARNESS AND SAFETY HOOK AT ALL TIMES;

* UPDATE N AMEND SITE DRAWING WHEN REQUIRED;

* ATTEND WEEKLY SITE MEETING N RESOLVED SITE PROBLEMS, IF ANY;

* SUBMIT MONTHLY PROGRESS PAYMENTS WITH APPROVAL FROM ARCITECHS N M & E CONSULTANTS;

* PREPARE VO WHEN NECESSARY;

* PREFERABLY PROCESS AT LEAST CLASS 3 DRIVING LICENCE;

* RECOMMEND SITE SOLUTION FOR PROBLEMS AT SITE SUBJECT TO PM APPROVAL;

* CONDUCT TRAINING FOR NEW WORKERS WHEN REQUIRED;

* OBTAIN DAILY WORK ORDERS BEFORE ALLOWING WORKERS TO START WORK AT SITE.

· Tertiary education in Quantity Surveying, or related field.

· At least experience as a Quantity Surveyor in the building/ construction industry.

· Excellent analytical and problem-solving skills, detail-oriented, with a high level of accuracy in cost estimation.

· Up-to-date knowledge of industry trends, cost benchmarks, and best practices.

· Those with good knowledge of procurement practices and controls will have an added advantage

Roles & Responsibilities

1. Must play a vital role in ensuring that these systems function correctly and integrate seamlessly with the building's electrical infrastructure.

2. He or She should design the power supply infrastructure necessary for the operation of fire protection systems. This includes providing power to components such as control panels, pumps, alarms, and emergency lighting.

3. An Electrical Design Engineer is responsible for designing, developing, and testing electrical systems, components, and equipment. Their job duties typically involve a mix of technical design, project management, and problem-solving to ensure that electrical systems meet specified requirements. Electrical engineers design and implement these control systems, which may involve programmable logic controllers (PLCs), sensors, actuators, and communication networks.

4. Proficiency in software like AutoCAD Electrical, PDMS Revit, or similar.

5. Knowledge of electrical principles, codes, and standards.

6. Expertise in circuit design and power distribution.

7. Electrical engineers ensure that fire protection systems have access to emergency power in case of a mains power failure. This may involve designing backup power systems such as generators or battery backup systems to ensure uninterrupted operation during emergencies.

8. Work closely with engineers, architects, and project managers to understand requirements.

9. Prepare specifications, technical reports, and documentation.

10.Estimate material, labour, and project costs.

11.Review and revise designs based on feedback and changing project

needs In larger buildings or complexes, fire protection systems may

require communication capabilities to coordinate responses and

relay information to emergency services.

12.Electrical engineers design and implement communication systems such as voice evacuation systems or interfaces with building management systems.

13.Electrical engineers may be involved in testing and maintenance activities for fire protection systems, ensuring that electrical components are functioning correctly and that backup power systems are operational.

14.Electrical engineers ensure that all electrical aspects of the fire protection system comply with relevant codes, standards, and regulations, such as NFPA, NEC (National Electrical Code), and local building codes.

15.Electrical engineers may provide training to building staff on the operation and maintenance of electrical aspects of the fire protection system. They also ensure that comprehensive documentation, including wiring diagrams, equipment specifications, and maintenance procedures, is available for reference.

Requirements

Six days work (Mon – Friday (8.00 am to 5.00 pm) & Sat 8.00 am to 12.30 pm) 44 hours weekly.

Minimum Diploma in Electrical Engineering from reputed Institute.

Electrical major

Minimum 10 years experiences in Electrical design

Salary Range – S$3500 - S$6500.

ROLES & RESPONSIBILITIES

• Manage order receipts efficiently, prioritizing timely order processing and good customer interactions and relationships.
• Supports the order to cash process with excellence in order processing.
• Registers and processes customer orders in the system received via, electronic mail, phone or through other contact with the customer.
• Ensures order processing is handled correct and in full and is transferred to the transporters (logistics). Raises issues in delivery and/or invoices process with Supervisor.
• Acts as first level contact with customer for answers to questions and in attempting to resolve complaints.
• Completes registering / filing / archiving of customer service-related documentation.
• Assures cooperation between customer service regarding administration of customers’ orders.
• Handle purchase order , good receive and other purchasing tasks
• Providing ad-hoc general administrative support when assigned.

Qualification and Skills

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, in business studies /management equivalent.
• 1-3 years’ work experience in customer services / order management/Logistics in distribution center
• Good intercommunication skills and able to work independently.
• Excellent negotiation and cost efficiency skills.
• Strong sense of urgency responsibility and commitment on works
• Able to adapt to fast-paced environment.
• Able to start work immediately or within short notice.

Key Responsibilities:

• Asist and work in SRTC Site for testing purposes.
• Monitor train signals, speed limits, track conditions, and weather conditions to ensure safe operations.
• Perform pre-departure inspections to ensure the train is in proper working condition.
• Maintain communication with station control center, conductors, and other relevant personnel to coordinate operations and report any issues.
• Respond to emergency situations, including braking, troubleshooting, and adhering to safety protocols.
• Adhere to all relevant laws, company policies, and safety standards while driving trains.

Qualifications:

• High school diploma or equivalent; additional qualifications in engineering mechanics, or transportation preferred.
• A valid Train Driver or Locomotive Engineer certification/license (requirements vary by country/region).
• Prior experience as a train driver or in a similar transportation role preferred.

Job Responsibilities:

1. Project Planning and Coordination:

• Develop detailed project plans, schedules, and budgets for the LRT Train.
• Ensure the integration of design, engineering, procurement, and construction phases.
• Coordinate with various teams, including civil, mechanical, electrical, and software engineers.

2. Risk Management:

• Identify potential risks (technical, financial, operational) early in the project.
• Develop strategies to mitigate risks and ensure smooth project execution.

3. Resource Management:

• Manage resources such as labor, materials, and equipment.
• Oversee procurement processes for materials and services needed for the project.

4. Quality Control:

• Ensure the project complies with safety standards, quality control procedures, and regulatory requirements.
• Supervise inspections, audits, and testing of materials and work.

5. Progress Monitoring and Reporting:

• Track project progress against timelines and deliverables.
• Provide regular updates to senior management, stakeholders, and regulatory bodies.
• Address any deviations from the schedule or budget.

6. Problem-solving and Decision-making:

• Resolve issues related to construction, engineering, or delays that might impact the project’s schedule or budget.
• Make decisions on technical matters that could affect the overall success of the project.

7. Project Closeout:

• Ensure all deliverables are completed, and the MRT system is handed over to the operational team.
• Organize the final inspection and commissioning process.

Requirements

1. Educational Background:

• A degree in Civil Engineering, Mechanical Engineering, Electrical Engineering, or Locomotive
• Certifications in Project Management (e.g., PMP, PRINCE2) are often preferred.

2. Experience:

• Significant experience (5+ years) in managing large infrastructure projects, especially in transport or construction industries.
• Previous experience in MRT or rail projects is highly advantageous.

3. Technical Skills:

• Familiarity with project management software (e.g., MS Project, Primavera).
• Knowledge of the MRT system design, construction, and operational requirements.
• Understanding of safety standards and environmental regulations.

4. Leadership and Communication Skills:

• Strong leadership to manage and motivate teams.
• Excellent communication and interpersonal skills to manage relationships with stakeholders.

5. Problem-solving Ability:

• Critical thinking to resolve issues related to project design, execution, or regulatory challenges.

Responsibilities:

• Assist Senior Contracts Manager in tender/contract review and finalizing the tender sum.
• Help with contract administration, progress claims, and liaise with the Client's representative on claims and variation costs.
• Compile subcontractor quotes for review and approval.
• Keep Contract Manager updated on all contractual and site matters.
• Review and verify subcontractor/supplier claims and prepare payment certificates for approval.
• Prepare final accounts and variation submissions.
• Maintain quality systems in the Contracts Department.

Requirements:

• Minimum Diploma in Quantity Surveying or equivalents.
• At least 5 years of working experience related field.
• Preferably experienced in pipe jacking works and tunnelling projects.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Primary Purpose

Functions as a technical specialist in water / wastewater treatment process. Performs all aspects of conventional design engineering and analysis independently. Broadens knowledge and skill set in area of discipline. Knowledge in other disciplines and/or functional areas.

Roles & Responsibilities

• Detailed design of process systems for water and wastewater treatment plants, including screening equipment, physical-chemical treatment plants, biological treatment plants, blower equipment, odour control plants, disinfection plants, sludge treatment plants, desalination process, etc.
• Detailed design of ancillary systems including chemical feed systems, mechanical ventilation systems, and drainage systems.
• Preparation of Process Flow Diagrams and P&IDs.
• General Arrangement and equipment layout drawings.
• Preparation of process equipment specifications.
• Review and evaluation of vendor submissions.
• Coordination with other disciplines e.g. civil, structural, electrical, mechanical, building services, instrumentation & control designers and digital water specialists.
• Able to lead meetings, HAZOP, discussions with clients, contractors and vendors.
• Provide engineering support for bids & proposals.
• Prepare testing and commissioning plans
• Process Testing & Commissioning
• Keeping abreast with latest development in water treatment technology and suitably applies in the design

Candidate shall have minimum of 12 years’ experience in the process design of water / wastewater treatment (municipal and industrial) with the following attributes:

1. Degree in Chemical or Environmental Engineering.
2. Expertise in water / wastewater treatment process modeling and optimization (including biological treatment).
3. Proficient in BioWin/GPS-X/SUMO or other wastewater modelling software.
4. Possess knowledge of wastewater treatment processes such as Activated Sludge, SBR, MBR & MBBR/IFAS.
5. Experience in preparing PFDs/P&IDs and specifications for procurement of water and wastewater process equipment.
6. Proven ability to manage diverse and large scale water projects, prioritize tasks, effectively.
7. Utilize available resources and ensure timely completion of projects.
   Proficient in written and oral communication with good interpersonal skills.

• Responsible for scope and proposal development

• Build and manage customer relationships and business opportunities

• Responsible to identify and build a diversified customer base

• Follow up on Construction Project with maintenance/ service proposal

• Contributes to team effort by accomplishing related results as needed

• Construction and Renovation knowledge is an advantage

• Achieved Sales Target

Job Summary: We are seeking a dedicated and compassionate Home Teacher to provide personalized educational support to students in a home setting. The ideal candidate will create engaging lesson plans, adapt teaching methods to meet individual student needs, and foster a positive learning environment.

Job Description:

· Develop and implement individualized lesson plans based on student needs and curriculum guidelines.

· Provide instruction in various subjects, including Math, Science, Language Arts.

· Assess and monitor student progress, adjusting teaching strategies as necessary.

· Foster a supportive and encouraging learning atmosphere.

· Communicate regularly with parents regarding student progress and needs.

· Utilize educational technology and resources effectively.

· Assist students with homework and project completion.

· Encourage critical thinking and problem-solving skills.

· Maintain a safe and organized learning environment.

· Overseeing the student’s academic progress, providing guidance, and offering emotional support while ensuring their well-being during their studies.

· Accompany the student to school and extracurricular activities as needed.

Job Requirement:

· Love interacting with children, passionate about learning and inspiring others to learn and enjoy working in a creative and dynamic environment.

· Able to engage and effectively communicate with children.

· Driven to improve yourself and produce excellent work.

· Collaborative and willing to go the extra mile for parents and students.

· Energetic, passionate and having a youthful attitude.

· Holding a Bachelor’s degree, preferably in Economics / Finance / Education / Electronic Computing, with a minor in Psychology.

· At least 1 year teaching experience (MOE and/or special needs teaching background is a plus).

· Familiar with the curriculum and syllabus of International Schools as well as Singapore's primary and secondary education systems.

· Familiarity with Spanish will be given priority consideration.

· Weekend availability.

Benefits:

· Competitive salary based on experience and qualifications

· 13th month salary

· Performance bonus

· Daily meals provided

Working Hours:

Monday to Friday: 6:30 PM – 9:30 PM (based on students' dismissal times; 1 Off day)

Saturday and Sunday: 10:00 AM – 6:00 PM

Working hours will increase during school holidays, and further details will be discussed during the interview.