Job Description

• Operate the power plant according to procedures and requirements including but not limited to starting, loading, unloading and shutting down the complete plant and systems
• Support the ASCE/SCE/PSCE to meet the contractual, technical and commercial set-up and operation of the Power Station
• Have sound knowledge of the safe operating parameters, controls, precaution and safety interlocks when starting and loading plant equipment so as to avoid damage and to be able to run the plant in the most efficient manner
• Plant process conditions troubleshooting, analyzing and testing when necessary
• Able to manage, monitoring and control the plant process operation from control room DCS
• Record plant operating data and report defects and abnormalities
• Carry out isolation/normalization of equipment as require by the Permit To Work System
• Understand and familiar with Plant Chemistry including handling of plant waste discharge
• Carry out plant change-over and conduct testing of equipment to meet statutory compliance and best industry practices
• Input to and liaison where necessary for long term Station planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation and to fully utilise all Power Plant’s contractual energy, fuel and utility supply agreements
• Assist to establish and implement mandatory O&M policies and procedures to meet all Station, company and legislative requirements
• Assist to fully develop and utilize the CMMS for efficient and effective Power Station operation practices
• Fully utilizing the CMMS to ensure all operation activities and experiences are recorded to comply with station, legislative and company policy requirements
• Assist to implement a Quality Management System as applied to the Power Station
• To assist fully with and help implement and manage all Health, Safety and Environmental practices
• Communicate with Regulatory and Authority on all operation matters on a timely manner
• To take part in training both on and off site, to be trained and to train others as required
• The post holder will be expected to comply with all company and legislative health requirements relevant to their duties and responsibilities
• To undertake additional duties and responsibilities as deemed necessary by the ASCE/SCE/PSCE
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• Possess at least a Diploma in a relevant engineering discipline
• Relevant competency certificate as issued by the Singapore regulatory authority, or education leading to this will be advantageous
• At least 6 years of working experience in Power Station Operations (ideally on a CCPP)
• Ideally involved in the technical and maintenance aspects of Gas Turbines, with some experience in the erection, commissioning and initial start-up phases of a modern Power Station
• Knowledgeable and experienced in Health, Safety and Environmental practices
• Willing to work in Jurong Island and on 12-hour rotating shifts
• Transport provided at Jurong East MRT station

A Sales Supervisor plays a critical role in supporting the success of an organization. They are the leader in coordinating the day-to-day activities of the sales representatives and ensuring that they are meeting their goals. The sales supervisor must work closely with the store manager, general manager, and production manager to communicate changing customer needs. As a liaison between the organization and the customers, the production supervisor must anticipate changing customer needs and design products that meet such needs.

Sales Supervisor Job Responsibilities

• Supervise the activities of the sales team including marketing activities like product activations.
• Assist the line manager to recruit, training, enumerating, and retaining a competent sales team.
• Provide reports to top management like sales reports, lead generation reports, customer complaints reports, and new customers’ on-boarded reports.
• Prepare sales presentations and other sales tools.
• Assist the line managers to ensure adequate client communication, maintain contacts with clients and provide feedback.
• Initiate sales activities, strategies, and sales plans required to build brand visibility.
• Serve as a point of reference to employees in terms of showing great work ethic, habits, personal character, and professional character.
• Develop and maintain accurate records of prospects, leads, pricing, sales activities, and active clients.
• Controlling company marketing expenses to ensure the marketing expenditure is kept within budget.
• Attend trade shows and other marketing events and represent the organization.
• Evaluate the performance of the sales team and seek ways to improve the team’s performance.
• Identify the trends in the market, both current, and future that are likely to affect the performance of the organization.
• Ensure the items are displayed correctly in the malls, supermarkets, and other sales points.

Sales Supervisor Skills/Abilities/Knowledge

• Bachelor’s degree in a business-related course with emphasis on marketing.
• Proven work experience in marketing and achieving set targets.
• Excellent communication skills, both written and verbal communication.
• Ability to lead and motivate a sales team, and put in place measures to retain a great team.
• Excellent selling skills, ability to close deals, and deal with post-purchase anxiety.
• Excellent selling skills, people-oriented, and ability to motivate a team.
• Ability to identify potential areas of growth and identify new business partnership opportunities.
• Strong organization skills and multi-tasking skills.
• The ability to work under pressure.
• Availability to work within opening hours (e.g. evenings, holidays, weekends).

Store Keeper Job Description

We are looking for an organized, experienced store keeper to be responsible for all stock, staff management, and planning promotional campaigns for the store. Storekeeper is a person who is responsible for goods in a store. Storekeeper is very important person for the store. He is the in charge of store department and also responsible for store control.

Storekeeper Duties & Responsibilities:

• Receive and forward all types of goods and deliveries in and out of the hotel to the correct point of storage area.

• Follow all standards for issuing and receiving stock within the store's area of operation.

• Monitor and take inventory on regular basis to compile orders based on par levels or needs.

• Maintain clear and organized records to ensure all reports and invoices are filed and stored properly.

• Monitor Periodic Automatic Replacement levels for all food items to ensure proper levels.

• Responsible to verify all goods arrived as per the agreed purchase, delivery note and agreed quantity has been received.

• Responsible for storage of both food & beverage and operational stock.

• Responsible for the day-to-day check on the storage facilities of upkeep and hygiene.

• Refuse acceptance of damaged, unacceptable, or incorrect items.

• Ensure cleanliness of all areas, keeping storage areas clean & tidy and in strict compliance with hygiene regulations.

• Ensure all store requisitions are signed by concerned Department Heads (HOD’s).

• Ensure the quantity requested and the quantity issued always matches.

• Ensure store requisition form is signed by the person collecting the goods and enter into the Inventory/Materials Management System.

• Post all invoices using the MMS - Material Management System.

• Speak with others using clear and professional language.

• Follow up on documentation of after-hours issues ensuring it is in accordance with established internal controls and procedures.

• Adhere to all Health and Safety procedures particularly relating to food and beverage items.

• Conduct inventory audits to determine inventory levels and needs.

• Assist the Accounts Payable Clerk / payable assistant in finding out any cost discrepancies.

• Complete requisition forms for inventory and supplies.

• Extend all requisitions on a daily basis and update the inventory management software/system.

• Work closely with Purchasing to order and receive items and equipment.

• Troubleshoot any vendor delivery issues and oversee/follow up on the return process.

• Verify and track received inventory and complete inventory reports and logs.

• Perform any other duties as assigned by the management or supervisors.

Storekeeper Requirements and Skills:

• Bachelor’s degree in retail management, marketing, or related fields

• Well experience in retail management or sales

• Knowledge of retail operations, merchandising, and budgeting processes

• Proven ability to develop and implement retail promotion strategies

• Positive, friendly, and organized

• Excellent verbal and written communication skills.

• Proficient in Microsoft Office.

• The ability to work under pressure.

• Availability to work within opening hours (e.g. evenings, holidays, weekends).

Roles and Responsibilities:

• Handle full sets of accounts for more than 10 entities

• Prepare month-end journals, schedules and reconciliation of general ledger to support monthly ledger closing and reporting schedules

• Perform daily accounting operational duty such as review and posting of invoices, payments and receipts

• Prepare financial statements in accordance with accounting standards (IFRS, SRFS) & company policies

• Liaise with auditors, tax agents, company secretary, and other statutory bodies/authorities on internal and external audit matters, and all statutory and tax/GST tax requirement compliances

• GST preparation and ACAP review

• Prepare and respond to surveys when required

• Lead and manage a small team of executives in the Finance department

• Undertake any ad-hoc assignments as when required by the management team

Requirements:

• Diploma in Accounting or professional certificate or equivalent

• Work experience in local audit firms and listed companies preferred

• Good hands-on experience with accounting systems, preferably MS Navision/Dynamics NAV

• Full set of accounts experience and good understanding of IFRS, SFRS and Singapore tax regulations.

• Strong interpersonal and communication skills (both written and verbal)

• A team leader and team worker mind-set

• Work well in challenging, fast-paced and deadline-oriented environments

• Good proficiency in MS Excel (pivot, v-lookup)

• Good analytical skills with strong problem-solving skills

• Preferably able to start work immediately or within short notice

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As a Assistant Microbiology, you will be responsible for overseeing routine testing for the Microbiology lab to support our manufacturing production.

In this role, a typical day will include:

· Perform routine/non-routine microbiology testing as per plan. Test includes Bioburden for product (contact lens) samples, water samples, in process samples, and environmental monitoring, growth promotion test, plate reading.

· Support analysis and report micro testing result and trend. Provide timely feedback to area owner if abnormality observed. Perform periodical evaluation on Micro related program (e.g. Environmental Monitoring, utilities monitoring and product/raw material monitoring.

· Support investigation for any Microbiology Out-Of-Specification (OOS) excursion.

· Revise SOP/forms when necessary

· Responsible for ensuring a safe work environment and compliance to all applicable laws and regulations

· Support implementation of assigned projects and HSE related activities

· Performs any other duties as assigned by Supervisor according to business needs

WHAT YOU’LL BRING TO ALCON:

· Diploma in Microbiology, Medical science or related field with 1-2 years of relevant experience in microbiology lab

· Office hours

HOW YOU CAN THRIVE AT ALCON:

· Good team player

· Enjoy working with various cross functional team across manufacturing site

Alcon Careers

See your impact at alcon.com/careers

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

• Coordinate patient registration, drugs dispensation and inventory management
• Handle registration, admission, and discharge of patients
• Collect payment and provide excellent customer service
• Issue invoices and send out

Requirements:

• Good initiative and adaptable to environment & new initiatives
• PC / computer literacy and ability to work in a fast-paced environment
• Dependability and team ability
• At least 1 year(s) of working experience in Healthcare/Medical industry
• Required language(s): English
• Preferably Junior Executive specialized in Healthcare - Pharmaceutical Science/ Medical Nurse or equivalent

Ensure that all works carried out are of highest quality standard to meet customer satisfaction.

§ Execute the site testing and commissioning activities of the company to the satisfaction of the owners and builders

§ Liaise with Yard’s commissioning personnel to close out issues which will affect the smooth completion of project

§ Ensure that Punch List are corrected and Test Memo and Service Acknowledgement Report are signed

§ Ensure that site issues are highlighted to the Production Manager/Assistant Production Manager in order to come up with proper and timely solution

§ Inform the project engineers in the event of changes on design, drawings and system operation which may arise during the job execution.

§ Highlight to Project Engineers any changes that may be required on supplied equipment for quality improvement

§ Ensure that the equipment used for commissioning are calibrated and maintained in good working condition to achieve quality standard.

§ Ensure non-conformity report is being raised as and when necessary.

§ Ensure that non-conformances are promptly resolved by means of investigation and corrective action.

Job Description

• Provide general office admin support
• Full-cycle recruitment and on-boarding for new joiners.
• Administer work pass application, renewal and cancellation.
• Conduct new joiners' orientation and ensure smooth on-boarding for all new joiners.
• Handle internship recruitment.
• Sourcing, evaluation and purchasing of materials
• Provide admin support on daily sales operations
• Respond to customer enquiries as required..
• Assist in Accounts Payable / Accounts receivable filing, processing and payment.
• Support daily Accounts & Costing, conduct on-going operations & payroll.
• Perform accurate data entry and ensure proper filing documents.
• Perform any other assigned projects duties.

Job Responsibility

• Coordinate between transporter, production, warehouse and other internal customers
• Preparation of document for delivery/import/export
• Housekeeping and cleaning.
• Periodic stock checks to ensure proper inventory control.
• Issuing store receipt and delivery order.

Requirements​​​

• Secondary School Education
• At least 1 years of relevant experience in the warehouse, logistic environment
• Good Communication and Interpersonal skill

The incumbent is responsible to:

• Perform specimen reception, preparation, and packing of specimens
• Assist with telephone reception duties and ensure patients’ bills are accurate and correct
• Carry out specimen analysis, operate, maintain and troubleshoot the analysers and validation of results
• Able to troubleshoot and explain basic problems and escalate when required
• Knowledgeable on Quality Control (QC) (eg. Westgard, criteria, EQA) and verification of QC results and assist to troubleshoot issues
• Adhere to the department’s standard operating procedures and safety requirements
• Assist in the supervision and guiding of junior staff
• Revise or write new SOP

Job Requirements:

• Degree in relevant field or equivalent.
• Relevant working experiences.
• To perform 3 rotating shifts - morning, afternoon and night shifts.

Excavator operators or heavy equipment operators should expect to perform many different duties, which can include:

• Operate heavy equipment to move, load, and grade earth, rock, gravel or other materials during construction.
• Operate heavy equipment to assist in the maintenance and repair of roadways.
• Excavate rock, ore or other materials from open-pit mines, strip mines, quarries or construction pits.
• Read and interpret blueprints or designs to understand the requirements of the job.
• Conduct pre-operational checks on equipment and clean, lubricate and refuel equipment.

Job Description & Requirements

• Monitor, coordinate and keep track of the site work progress to ensure all work is carried out in quality and efficiency manner.
• Assign job task to workers and conduct daily briefing
• Ensure compliance of WSH Regulation & Safety Procedures
• Close monitoring of jobs and provide necessary updates to internal division.
• Responds to customers' feedback and inquiries, provide good client support and maintaining a good relationship
• Identifying and resolving workplace problems.
• Providing reports and activity updates to management
• Performs any other related duties as assigned
• Coordinate incoming and outgoing inventory deliveries

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. We are a company specializing in engineering consultancy. We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Responsibilities:

• Responsible for accounting processes – AP & AR process, journal entries, account reconciliation and internal tasks.
• Assist in month-end closing and financial reporting to Management.
• Support Finance and HR department on ad hoc matters.
• Coordinate and liaise with internal parties to support intercompany activities.
• Partner with stakeholders across business units (sales, finance, HR, operations, compliance and other internal stakeholders) to drive and implement strategic initiatives for improved efficiency and productivity.

Requirements:

• We are looking for a diligent person used to working in a close team environment who is willing to ‘go the extra mile’ when required in order to support their colleagues.
• Good communication skills.
• Organized, independent, reliable, resourceful, willing to learn and a good team player.
• Strong multitasking and prioritization skills with the willingness to adapt to change.
• Willing to run errands.
• Proficient in MS office.
• Education Requirement: Diploma or higher.
• We offer great benefits - AWS (Annual Wage Supplement), Discretionary bonus, Dental and Medical benefits.
• Professional subscription and training allowance.

At No deviation, we strive to deliver our best every day. We apply our core values of empathy, integrity, and transparency to every activity, including engagement with our candidates. We are an equal opportunity employer, value diversity, and promote inclusivity at our company. We do not discriminate based on race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Visiting Professor Position in Physics

The College of Science seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

​The Visiting Professor will collaborate with PAP colleagues to work in the area of optoelectronic materials and devices, including the fabrication and characterization of low-dimensional materials and micro/nano lasers. He/she will engage in collaborative research at the program level (e.g., NRF-CRP) with PAP colleagues, mentor PhD students and research fellows, and contribute to the development of major research grant proposals (e.g., MOE AcRF Tier 3, NRF-CRP). Additionally, the Visiting Professor will explore interdisciplinary collaborations with colleagues from other Schools within NTU.

The candidate should have at least 20 years of experience in experimental research on optoelectronics and optical spectroscopy, along with expertise in designing and fabricating micro/nano lasers using cutting-edge novel gain media. A demonstrated international reputation and a strong track record of securing external research funding are essential.

Enquiries about the position can be addressed to Professor LEW Wen Siang.

Applications will be accepted until the positions are filled. All applications and materials submitted will be held in strict confidence. Only shortlisted candidates will be notified

OMS has built a long-standing commitment to the upstream energy industry as we manufacture and distribute products from facilities and business units around the world. We are an equal opportunity employer and process all employment applications following the relevant regulations in the countries we operate in.

We are now looking for a Product Design Engineer, with strong background in Mechanical Engineering to join the Engineering Team. The individual is responsible to prepare and generate detailed engineering work instructions and procedural specifications, provide technical support to sales function, guide and supervise junior product engineers for day to day work order preparation and perform other assigned duties as and when required. Work scope covers all OMS locations across the region.

Individuals with relevant product design experience in Conductor/Pipe Connectors, Wellhead Systems, Valves, Actuators, Choke, and/or Downhole Systems will be highly considered for this role.

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences in transportation
• have relavant certificate/diploma
• 
  
• Hiring, training, supervising, and evaluating employees.
• Preparing employee work schedules.
• Addressing employee disputes, questions, and concerns.
• Ensuring all staff adhere to safety standards, company policies, and procedures.
• Managing and accounting for all money-handling procedures.
• Ordering, recording, and managing inventory.
• Ensuring the shop is adequately stocked, clean, and visually appealing.
• Motivating employees to reach sales goals and provide excellent customer service.
• Handling customer complaints.

Responsibilities:

RECEIVING

1. Plans for daily collection of parts from customers.

2. Verifies all customers’ parts and quantities against their Purchase Order or other delivery documentations and acknowledge acceptance.

3. Generates the Process Control Card (PCC) from the DNAsp.

4. The Production Planner will clone the process steps in the PCC if it is a new part and/or there is no data is found in the DNAsp. He/She will stamp “NEW PART PLS REFER TO TECHNICAL TEAM” on the PCC.

5. Ensures that the process requirements are correctly specified on the PCC prior releasing for incoming inspection.

6. Seeks clarification from customers if the following discrepancies are identified.

- Part information i.e. Part Number, Serial Number, Job Number, Quantity, etc.

- Incorrect process work scopes.

- Incorrect certification required.

7. Responsible for prioritizing production planning and scheduling of parts processing.

WORK IN-PROGRESS (WIP)

8. Monitors of parts status in the DNAsp and discusses with Production to ensure that parts delivery schedules are met.

9. Informs respective customer and proposes for alternate turnaround time (TAT) or delivery date if the original TAT is not met.

DELIVERY

10. Generate Delivery Orders for processed parts and arrange for parts delivery to customers.

SUB-CONTRACTING

11. Issues of Purchase Order to subcontractor. Ensures that relevant documentations are attached with the job.

12. Coordinates with subcontractor for the parts collection or makes necessary arrangement for delivery of parts to them.

13. Liaises with subcontractor to ensure that work is completed as per schedule.

14. Ensures that subcontractor’s COC and/or Inspection Report are attached with the parts upon work completed.

OTHERS

15. Assumes the responsibilities of the Production Control Executive in her absence.

To prepare Lifting Plans (Preliminary and Revision) for submission as per schedule

Apply broad idea output for calculation and visualisation

Work closely with Project Teas on drawing, amendments and updates

Identify potential operational issues and redesign plans to improve functionality

Any other adhoc duties assigned by supervisor/management

Job Description:

• Handle General Ledger, Monthly and Year End Closing
• Responsible for the preparation and maintenance of full set accounts
• Responsible for month/year end financial and management reports
• Prepare fixed assets schedules and bank reconciliation
• Handle intercompany transactions, reconciliation, and confirmation
• Review the work of Accounts Assistants to ensure the accuracy of daily sales revenue and expenses
• Prepare and submit of quarterly GST returns
• Liaise with auditor, tax agent and company secretary for statutory filings and relevant documetation
• Assisting any ad-hoc activities assigned in relation to the operation of the business
• Fully responsible for monthly AR and ensure customers’ payment on time
• Competent knowledge of Financial Reporting Standards and other finance/ statutory requirements
• Assist in the implementation of internal controls. i.e., Process and Compliances to group's requirements and policies
• Assist Inventory management, e.g.: Stock take, Monitoring and prepare monthly expiry stock report
• Do credit review for new customers and update their profile in system regularly
• Create payment advise in bank system
• Prepare and send E-Statement and collect payment
• Prepare and submit tax computation including GST
• Prepare audit schedules including drafting financial statements for year-end audit
• Assist in preparing budgets and financial forecast – Analyze data to operations team – Monitor daily cash flow
• Liaise with software consultant in relation to the system improvement / customization reports as required and involving in system troubleshoot

Qualifications:

• Bachelor's Degree in Accounting or a similar field of study
• Diploma in Accounting
• Experience with accounting system, Odoo is an advantage
• Advanced MS Office Skills with strong Excel proficiency

Job details:

1. Responsible to plan, organise, track and maintain machinery repair activities and developing preventive/predictive maintenance procedures.

2. Maintaining an internal record of the maintenance of equipment

3. Ability to spot potential issues and act quickly on serious problems

4. Respond to emergency calls for maintenance; Manage the set up and take down of different events. Perform troubleshooting to solve minor repair issues.

5. A good understanding of maintenance machinery and equipment, as well as outstanding written and verbal communication skills in English and Chinese

6. Liaise internally (ops & workshop team) to arrange for servicing

7. Establish, implement, train, and monitor maintenance guidelines.

8. Manage inventory of maintenance supplies and equipment, ordering and restocking as necessary.

9. Any other duties as assigned.

Requirements:

- ITE certificate/Diploma in Mechanical Engineering, Electrical Engineering, or a related field.

- min 2 years of experience in servicing and maintaining heavy machineries, with specific expertise in mobile equipment preferred.

- Excellent problem-solving skills and the ability to work independently

- Good communication skills

- PC literate in MS applications and proficient in spoken and written English

Position: Senior Registered Nurse, Registered Nurse

Location: West

Type: Full-time, Permanent

Shift: Rotating (2-shifts)

Responsibilities:

• Deliver client care, including addressing medical emergencies, managing medications, and ensuring adherence to nursing protocols and safety regulations
• Maintain accurate client medical records and schedules for medical follow-ups
• Monitor patient conditions and report any changes to the medical team.
• Collaborate with physicians, colleagues, and support staff to ensure comprehensive patient care.

Job Requirements and Qualifications:

• Registered with Singapore Nursing Board
• National ITE Certificate in Nursing or equivalent recognized by Singapore Nursing Board
• Valid Basic Cardiac Life Support (BCLS) certification will be an advantage
• Entry levels welcome to apply
• Individuals possessing community nursing experience, along with a robust clinical knowledge and specialized expertise in Hospitals, Transitional Care Facilities, Nursing Home management, or Day Care Centres, will have added advantage
• Excellent communication, interpersonal, and problem-solving skills
• Familiarity with regulatory guidelines and compliance standards.
• Possess good interpersonal and communication skills, with positive work attitude and strong commitment towards service excellence
• Ability to work in a team and in a fast pace environment
• Willing to work shifts, on weekends and public holidays
• Proficient in the use of Microsoft Office applications

Job Description:

• Handle General Ledger, Monthly and Year End Closing
• Responsible for the preparation and maintenance of full set accounts
• Responsible for month/year end financial and management reports
• Prepare fixed assets schedules and bank reconciliation
• Handle intercompany transactions, reconciliation, and confirmation
• Review the work of Accounts Assistants to ensure the accuracy of daily sales revenue and expenses
• Prepare and submit of quarterly GST returns
• Liaise with auditor, tax agent and company secretary for statutory filings and relevant documetation
• Assisting any ad-hoc activities assigned in relation to the operation of the business
• Fully responsible for monthly AR and ensure customers’ payment on time
• Competent knowledge of Financial Reporting Standards and other finance/ statutory requirements
• Assist in the implementation of internal controls. i.e., Process and Compliances to group's requirements and policies
• Assist Inventory management, e.g.: Stock take, Monitoring and prepare monthly expiry stock report
• Do credit review for new customers and update their profile in system regularly
• Create payment advise in bank system
• Prepare and send E-Statement and collect payment
• Prepare and submit tax computation including GST
• Prepare audit schedules including drafting financial statements for year-end audit
• Assist in preparing budgets and financial forecast – Analyze data to operations team – Monitor daily cash flow
• Liaise with software consultant in relation to the system improvement / customization reports as required and involving in system troubleshoot

Qualifications:

• Bachelor's Degree in Accounting or a similar field of study
• Diploma in Accounting
• Experience with accounting system, Odoo is an advantage
• Advanced MS Office Skills with strong Excel proficiency

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities

a) Manage asphalt premix production quality control processes;
b) Conduct regular inspections and testing;
c) Analyse test results and implement corrective actions;
d) Maintain quality control records and documentation;
e) Train production staff on quality control procedures;
f) Collaborate with production and laboratory teams;
g) Develop and implement quality improvement initiatives;
h) Under the WSH Act, employees have a duty to keep their workplace and colleagues safe:
• Cooperate with employers and follow safety and health procedure;
• Report unsafe acts and incidents;
• Do not tamper with safety devices or perform wilful or reckless acts; and

i) Be responsible for any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirement

• Diploma / Certificate in Asphalt Technology or related fields
• Preferably with relevant experiences
• Well knowledge in quality control procedures and standards (ASTM, AASHTO, BS)
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to interpret test results and make informed decisions
• Familiarity with quality management systems (ISO 9001)
• Proficient in Microsoft Office and laboratory software