We are looking to appoint a full-time Research Associate (History) at the School of Humanities in Nanyang Technological University (NTU).

The incumbent will be part of one of a collaborative team of researchers based in NTU’s History Department working on the history of environmental crises and epidemics in colonial Hong Kong led by Assistant Professor Florence Mok. The Research Associate will focus on examining how transnational networks which linked Hong Kong and other places, especially Southeast Asia, affected the development of the Cold War, which in turn influenced state’s response to different kinds of crises, political and natural.

The fellowship position is a fixed term post for 12 months, with a possibility of further extension.

About the Project

This study will make an original contribution to the political, social and environmental history of modern Asia, British colonialism and the Cold War by exploring how the colonial government and the Chinese society in Hong Kong mitigated environmental crises from 1945 to 1980, with the Cold War in the background. This is a period of historical significance: it witnessed growing policy initiatives, increased economic affluence and rising political and social consciousness. It will focus on how the state and popular responses to water shortages, in particular propaganda, were influenced by Cold War politics. The proposed study will use a traditional historical approach of examining published sources and archival manuscripts in Hong Kong and London.

Key Responsibilities:

• Examine the data collected from the Hong Kong Public Records Offices and the National Archives at Kew.
• Carry out literature survey on Hong Kong history and different theories, in particular work Cold War networks between Hong Kong and Southeast Asia, different forms of propaganda and approaches of crisis management.
• Coordinate with the History Research Fellow, the History Associate and PI, apply theoretical frameworks to the historical/archival findings.
• Use both qualitative and quantitative methods to analyse the effectiveness of the crisis management measures implemented by the colonial government in Hong Kong.
• Work with PI and turn the findings into journal articles for submission.
• Organise seminars and conferences on the research topic.

Job Requirements:

• MA/MPhil in History, specializing in post-war Hong Kong studies/the Cold War/ connections between Hong Kong and Southeast Asia.
• Knowledge in qualitative and quantitative methods and ability to analyse archival records and statistics.
• Ability to read and interpret Chinese sources, fluency in Cantonese would be advantageous as archival data collected from the Hong Kong Public Records Offices, and Chinese newspapers and mass media that we sampled would contain materials in Chinese /Cantonese.
• Excellent interpersonal skills, able to build productive relationships within the research team and beyond NTU.
• Highly self-motivated, capable of working independently as well as part of a team.

We regret to inform that only shortlisted candidates will be notified.

Application Procedure:
Please apply by submitting the following documents in Workday:

1) Curriculum Vitae

2) Cover letter of no more than 2 pages which addresses your suitability for the fellowship

3) Statement of no more than 1 page of your potential contribution to the project.

Job Description

• Oversea Shipment and logistics
• Increasing our Company's market share
• Business development / Sales.
• Suppliers sourcing and liaison
• Purchases and price negotiation.
• Increase of Product range revenue yearly
• Reporting to the Director/Manager of the Company
• Others as assigned
• Perform ad-hoc duties if necessary

Requirements:

• ‘A’ Level, Diploma in related discipline or equivalent
• Be resourceful, problem-solving, meticulous, organized and close attention to details
• No experiences needed
• Good knowledge & familiar in MS Office such as Words & Excel is a must

We regret that only shortlisted candidates will be notified

The successful candidate will be part of procurement team to ensure the efficiency and cost-effectiveness of the purchasing process within the organisation. The role shall involve establishing and overseeing effective execution of the company’s overall procurement strategies and policies.

Responsibilities:

• Overseeing all the purchasing processes involved in directly and indirect procurement such as technical / engineering services, plants and equipment, spares, and materials needed for efficient manufacturing operations and processes.
• Strategizing with various stakeholders to plan and manage current needs as well as future requirements.
• Preparing budgets, cost analyses, and reports.
• Preparing plans for the purchase of equipment, spares, and repair and maintenance services.
• Reviewing, comparing, analysing, and approving products and services to be purchased.
• Sourcing and evaluating goods and services to determine which best meet the organization’s needs.
• Negotiating and securing supply contracts with best pricing, payment terms and delivery options.
• Prepare purchase orders in line with final negotiations with selected suppliers.
• Liaise with Finance department and vendors to resolve discrepancies such as price, quality, delivery, or payment issues, if any
• Managing good suppliers’ relations which include researching and enhancing supply chain resilience.
• Evaluating supplier performance (sustainability, quality, reliability, delivery lead time, value) developing and managing long term ethical relationships with supply chain.

Requirements:

• At least diploma or bachelor’s degree in supply chain management / engineering and trained and hone with specialized skills in sourcing and negotiation.
• Analytical, financially & numerically astute with strong proven problem identification and solution abilities.
• Good verbal & written communication ability, interpersonal and influencing skills.
• Able to work independently, multi-task and respond quickly in a fast-paced environment.
• Experienced in establishing e-procurement in an organization, preferred.

Job Description:

• Manage large number of incoming calls. Directly work with customers by answering product and service questions; furnishing information about other products and services; process orders and prepare delivery documents; correspond with and go the extra miles to fulfill customer’s needs to ensure customer satisfaction.
• Resolve product or service problems by clarifying the customer's complaint; determine the cause(s) of the problem; discuss and propose solution; execute and follow up to ensure satisfactory closure.
• If problem was complicated or systemic, to escalate and redirect the issue to the appropriate team or department for resolution.
• Documentation and maintenance of customer records and operation details:
• Keep detailed customer records and update customer records after each interaction (such as compliment, complaint and feedback) with that customer.
• Assist the Sales and Marketing Team in boosting sales and performance. This include providing feedback on market intelligence, competitors’ activities, setting up appointments or following up with customers after their first interaction with the salesperson.
• Prepare performance and other administration reports
• Interface with various functional areas to co-ordinate scheduling activities to meet committed plans and customer’s sales / service order.
• Coordinate and resolve potential conflict of scheduling priorities and resource allocation with the plant process owners and drivers to ensure all delivery / collection activities are carried out in a timely manner.
• Conduct briefing to ensure that the drivers and assistants know their specific job scope and equipping requirements, safe work method, work schedule, delivery time frame as well as compliance with the Safe Operational Procedure, and performance standard of their assigned task.
• Monitor terms and conditions of Purchase / Work Orders received from customers and follow up closely on the delivery dates and quantity to be fulfilled.
• Assist in logistics resource forecasting and capacity planning, monitoring and motivating drivers and delivery assistants work performance, skills and training needs.
• Keeping record of work hours and trips performed by drivers and delivery assistants

Requirements:

• Degree / Diploma in Logistics / Supply Chain / Business Administration / Engineering.
• IT savvy in MS office and IOT.
• Candidates with good people skills (positive, meticulous, proactive problem-solving attitude) and possess empathy, strong customer service orientation are good fits for this role.
• Interpersonal and communication skills –Good listener, blessed with ability to communicate and interrelate well with customers, colleagues and business associates from different backgrounds.
• Good planning capability: Ability to multi-task, prioritize and manage time effectively.
• Mature and have minimum 3 years of experience in highly dynamic customer service and Operational planning and control work environment.

1. Source and evaluate suppliers, vendors and service providers to ensure the best quality and pricing.

2. Prepare and issue purchase orders, contracts and agreements.

3. Conduct market research to identify trends and potential suppliers.

4. Negotiate terms and conditions with suppliers, including pricing, delivery schedules, and payment terms.

5. Develop and maintain strong relationships with existing and potential suppliers.

6. Monitor inventory levels to avoid shortages or excess stock.

7. Coordinate with warehouse and logistics teams for timely delivery and storage.

8. Ensure all procurement activities comply with company policies and legal requirements.

9. Maintain accurate records of purchases, contracts and supplier performance.

10. Identify opportunities for cost savings and process improvements in procurement.

11. Monitor budgets and forecast procurement needs.

12. Conduct performance reviews of suppliers to ensure adherence to quality and delivery standards.

13. Handle supplier disputes and resolve issues effectively.

14. Prepare regular procurement reports including spend analysis and supplier performance metrics.

15. Provide insights and recommendations to improve the procurement process.

Qualifications and Requirements:

• Education: Diploma in Supply Chain Management, Business Administration, or a related field. Professional certification (e.g., CIPS, CPSM)
• Experience: 2-4 years of experience in procurement, supply chain, or related fields.

Skills:

• Strong negotiation and communication skills.
• Proficiency in procurement software and Microsoft Office Suite.
• Analytical and problem-solving abilities.
• Knowledge of procurement regulations and industry best practices.
• Ability to work under pressure and meet deadlines.
• Excellent organizational and multitasking skills.
• Strong interpersonal skills to collaborate with internal and external stakeholders.

• Inspect and test motorbikes to identify mechanical, electrical, or performance issues.
• Use diagnostic tools and equipment to pinpoint engine, transmission, and electrical problems.
• Conduct routine maintenance, such as oil changes, brake inspections, chain adjustments, and tire replacements.
• Repair or replace defective parts, including engine components, clutches, brakes, and suspension systems.
• Adjust and tune engines to improve performance and efficiency.
• Diagnose and repair electrical issues, such as faulty wiring, lighting, ignition systems, and batteries.
• Install and troubleshoot electronic systems, such as GPS trackers or alarms.
• Communicate with customers about repair needs, provide estimates, and recommend preventative maintenance.
• Test motorbikes after repairs and demonstrate functionality to customers, if required.

Requirements:

• Proven experience as a motorbike mechanic or similar role.
• Expertise in diagnosing and repairing two-wheeled vehicles.
• Proficiency with diagnostic and repair tools.
• Good understanding of internal combustion engines, electrical systems, and braking systems.
• Ability to read and interpret technical manuals and schematics.
• Attention to detail and problem-solving skills.

The Senior Research Fellow – Optical Tools for Molecular Analytics will work collaboratively with the researchers from the Institute for Digital Molecular Analytics and Science (IDMxS) on projects involving the application of innovative optical tools, design new optical characterization platforms, publish research results, and apply for research funding to support research projects centered around the application of optics principles toward the development of new molecular and biological detection techniques.

Key Responsibilities:

• Work with and train/educate IDMxS researchers on projects involving advanced optical techniques and microscopy
• Train personnel in the use and maintaining home-built microscope systems and other devices (plasma cleaner, zeta-sizer, lasers etc.)
• Develop innovative experimental optical techniques and methods
• Establish, maintain, and apply optical characterization capabilities that can be integrated with molecular detection technologies developed at IDMxS, while troubleshooting technical issues and liaise with external vendors on repairs and servicing
• Publish research in scientific journals.
• Apply for competitive research funding and manage funded research projects
• Mentor junior researchers and students

Job Requirements:

• PhD in Optics, Microscopy, Engineering, or related disciplines and at least 5 years of relevant research experience
• Have a strong optics foundation: understand fundamental optical principles, which include geometrical optics, wave optics, microscopy and imaging, fluorescence, plasmonics, and quantum optics
• Prior experience in analysis of experimental data using statistical analysis and data visualization techniques
• Background in quantum optics
• Ability to work both independently and collaboratively on interdisciplinary research projects
• Ability to balance multiple research projects, meet deadlines and effectively collaborate with partners of different backgrounds and levels of expertise

We regret that only shortlisted candidates will be notified.

Key Responsibilities:

• Supervise and coordinate daily project activities, including installations and collaboration with consultants, contractors, and subcontractors.
• Monitor project schedules, track progress, and resolve issues to ensure timely completion.
• Develop and manage project schedules by analyzing plans, estimating timelines, and sequencing tasks.
• Guide drafters in preparing installation plans, piping layouts, isometric drawings, and detailed mechanical designs.
• Review project designs and specifications, manage plan changes, and recommend necessary adjustments.
• Verify safety documents and issue work permits to contractors as required.
• Assist in preparing tender documentation, procurement specifications, and bills of quantity.
• Provide regular project updates through reports and meetings, highlighting progress and recommending actions.
• Manage vendors and suppliers during commissioning and testing phases.
• Enforce safety and cleanliness standards on-site while ensuring compliance with regulations.
• Support budget preparation, cost estimation, and resource allocation for projects.
• Conduct toolbox meetings and maintain records.

Requirements:

• Minimum Degree in Engineering related field.
• Strong knowledge of process piping and equipment installation

Duties & Responsibilities

• Good knowledge of contract and QS procedures and pricing.
• Experienced in procurement, budgeting, estimation, contract administration, measurement of quantities & variation orders
• Compile photos, inspection forms and all relevant documents required for VOs attachment.
• Strong interpersonal, communication & negotiation skills
• Prepare tender documents, contracts, budgets, bills of quantities and other documentation
• Any other ad-hoc tasks assigned by Superior.

Requirement

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil), Quantity Survey or equivalent.
• 3 ~ 4 years of relevant working experience (QS) ; Minimum 5 years & above (for Senior QS)
• Demonstrate proficiency and competency in a project QS function and can work independently.
• Bilingual in English and Mandarin is preferable

When submitting a job application, please remember to include the following details for us to conduct a more effective job-matching for you:

1. Expected & last drawn salary

2. Reason for leaving

3. Work experiences and job responsibilities

*We regret that only shortlisted candidate will be notified.

The School of Civil and Environmental Engineering (CEE) at Nanyang Technological University is a leading school for Sustainable Built Environment. It has over 60 faculty members and more than 1,500 students and is rapidly expanding its range of education and research activities.

For more details, please view School of Civil and Environmental Engineering | NTU Singapore.

We are looking for a Research Associate to conduct life-cycle assessment on solid waste treatment and management systems.

Key Responsibilities:

• Life-cycle assessment on solid waste treatment and management systems.

Job Requirements:

• Master’s degree in Environmental Engineering or related field
• At least 1 year of relevant experiences in life-cycle assessment
• Familiarity with related literature and software
• Good written and oral communication skills
• Entry level candidates are welcome to apply

We regret to inform that only shortlisted candidates will be notified.

Looking for a rewarding career that fits your schedule? Join our team of award-winning bus captains and Operations Team!

We are looking for responsible full time / part time bus captains(13 seaters) to provide outstanding service in transporting people between various places—mainly between schools and homes. Core working timing is 6am-8am, 1pm-6pm, Mon-Fri, school term. Suitable for retirees or those who do not want a hectic job schedule.

The main duties of a bus captain are as follows:

· Pick up and drop off passengers at designated locations

· Follow a planned route according to a time schedule

· Ensure that the trips stay on schedule

· Ensure the safety of passengers both onboard the bus and when alighting

· Obey traffic laws

· Follow procedures to ensure passenger safety

· Keep passengers safe

· Perform basic maintenance (check the bus tires, lights, and oil)

· Keep the bus clean and presentable to the public

· Report all incidences and traffic disruptions to HQ

· Additional trips done on weekdays/school holidays/Sat/Sun will be paid accordingly

Candidates should have a valid Class 3 driving license and Bus Driver's Vocational License. HDB vehicle parking fee will be reimbursed where available.

~~~ A Work-Life Balance Company ~~~

Role of WSH Coordinator

The Workplace Safety and Health (WSH) Coordinator supports the organization’s WSH procedures by conducting safety checks to identify cases of non-compliance with organizational procedures and legal WSH requirements. He / She observes daily work practices, gathers feedback from workers, evaluates risks associated with the hazards identified in the workplace and escalates issues that require corrective and preventive actions to be undertaken.

The WSH Coordinator's duties require him/her to work outdoors conducting checks on the various sites, equipment & machinery. The WSH Coordinator must fulfil relevant legal requirements on WSH-related training to undertake the job and specific WSH tasks.

Scope of Services for WSH Coordinator

1. Assist in identifying any unsafe condition and unsafe work practice which is carried out on the worksite.
2. Assist and recommend implementing reasonably practicable measures to remedy the unsafe condition and unsafe work practice.
3. Assist /conduct in investigation on an accident or dangerous occurrence and furnish investigation report, finding and recommend preventive measures, submit to Workplace Safety and Health Officer of the workplace.
4. Assist and conduct in-house training, safety event, emergency response drill or other activity for the purpose of promoting the safe work conduct and raise the safety awareness in the workplace.
5. To participate in establishment and review risk assessment or safe work practices (if required) in accordance with Workplace Safety and Health Act and Subsidiary legislation
6. Assist in establishment, assess and monitoring of permit to work system (PTW) at the workplace in accordance with WSH Legislation.
7. Assist or conduct first day at work safety induction course or other safety orientation activity for all personnel who work at the workplace.
8. To liaise with the client’s representative, external parties, certifying agency and regulatory department   e.g., Ministry of Health, Ministry of Manpower, NEA or SCDF pertaining to safety and health, environmental matters (if require).
9. Assist in establishment, upkeep of workplace safety and health documentation and records.
10. Inspect the workplace to ensure the facilities and equipment are in good working condition and do not pose any potential hazard.
11. Attend WSH meetings with the client/main contractor’s and co-ordinate with their safety representatives.
12. To participate in Workplace Safety and Health Committee and furnish the minutes of every meeting.
13. Ensure timely reporting of monthly safety performance as prescribed by the Head of Safety / WSHO
14. Function as a Workplace Safety and Health Coordinator as required under the Workplace Safety and Health Act.
15. Inspect & audit workplace to ensure compliance with local legislations and clients’ requirement.
16. Be responsible for any other duties that may be assigned to you from time to time as your superior/management deems fit.

Minimum Qualifications/Job Experience:

• Certificate in Advanced Certificate in WSH Level B and/or any relevant Safety Certificates.
• Attended the WSH Coordinator Refresher Course
• Attended the Managing Work-At-Heights (WAH) Certificate
• Confine Space Assessor Certificate is advantage
• Project Safety Management @ SP Group Certificate is advantage
• With at least 2 years of working experience (preferred road works & SP Group project)
• Experience in SP Group and LTA will be an advantage.
• Good interpersonal skills.
• Having own transport is preferable
• Positive working attitude
• 6 working days & able to work day/night shift. (Sat 4hrs counted as OT)

JOB DESCRIPTION

• Packing of customer orders for delivery or self-collection.

• Be accountable for the cargo/goods movement within the warehouse.

• Perform container Loading / Unloading operation.

• Loading and unloading of goods upon arrival.

• Any discrepancy(s) for inbound and outbound cargoes must be immediately reported to the superior and documented.

• Perform picking and packing function based on DO requirement.

• Any cargo/goods outside the warehouse must be properly canvassed.

• Warehouse maintenance works.

• Perform general warehouse housekeeping.

• Adhoc duties as assigned by Supervisor.

• Working day（day to day): Mon - Sat. Sat is half day.

• Working Hours (time to time): 8:30am to 6:30pm/Sat half day until 1pm.

• Other Allowance (if have): Depends

• Working Location: 21 LKY Warehouse

• Annual Leave: 7 Days

• Other requirements:

• Accept worker travel jb daily? Acceptable

• Benefits: Depends

- Free shuttle rides to work and after work (to Joo Koon mrt).

Responsibilities:

• Operate the Combined Cycle Power Plant safely, efficiently, and in accordance with established operational guidelines to meet output requirements.
• Prepare for, execute, and monitor the startup, shutdown, and routine operations of generation units and auxiliary systems.
• Carry out condition monitoring, review operating parameters, and correct deviations to maintain optimal plant performance.
• Identify, report, and rectify all system, plant, and equipment defects.
• Ensure adherence to the plant’s generation dispatch schedule, conducting operational tests and inspections as required.
• Respond to plant emergencies, equipment failures, and outages.
• Manage generating unit operations and maintenance activities, ensuring compliance with safety measures and specifications.
• Monitor work areas and inspect tools and equipment to detect and prevent unsafe conditions or violations of procedures and safety rules.
• Prepare daily shift log reports and other operational reports.
• Liaise with external agencies (e.g., EMA PSO, PUB, NEA, SCDF) on operational matters during shift duty.

Requirements:

• Nitec in Mechanical, Electrical Engineering or an equivalent discipline.
• Knowledge of plant processes, operations, and safety protocols.
• Relevant experience in power plant operations, or related industries, is advantageous.
• Possession of a 2nd Grade Engineer (Steam) Certificate of Competency or a 1st Grade Engineer (Steam Combustion Engine) Certificate of Competency awarded by the Ministry of Manpower is an advantage.
• Proficiency in Microsoft Word, Microsoft Excel, and Maximo EAM or equivalent software.
• Strong analytical and communication skills, self-motivated, independent, and a team player.
• Willingness to work 12-hour rotating shifts.

Responsible for carrying out maintenance works in a safe, efficient and timely manner in accordance with maintenance strategy, to meet planned schedule requirements.

Responsibilities:

· Attend to work orders allocated by Maintenance Engineers

· Analyse process parameters, alarms and information / drawings to diagnose and trouble shoot equipment problems

· Perform preventive maintenance to ensure that plant equipment and auxiliary systems continue to operate smoothly and efficiently

· Perform unit functional test for re-commissioning of overhaul units

· Lead in the repair or replacement defective or malfunctioning components of machinery and equipment

· Assess spare part requirements and raise purchases, record parts and materials used and review tender quotations

· Coordinate logistic arrangement for all maintenance activities

· Maintain a safe and orderly work area by practicing organised housekeeping

· Preparation of weekly activity reports

· Perform other duties as assigned by supervisors

Requirements:

· Diploma in Electrical / Electronics Engineering or equivalent

· Self-driven, with good working attitude and a good team player

Roles and Responsibilities:

• Marketing Strategy: Develop and execute marketing to attract new clients and expand the agency's business portfolio.
• Client Acquisition: Identify and establish relationships with potential employers, guiding them through the process of hiring domestic helpers (maids).
• Recruitment Marketing: Promote and advertise available domestic helper profiles to potential employers.

Requirements:

• Proven experience working in an employment agency in Singapore, especially in the recruitment and placement of domestic workers (maids).
• In-depth knowledge of Singapore's MOM rules, regulations, and policies for hiring foreign domestic workers.
• Strong marketing skills with a focus on business development and lead generation.
• Proficient in using digital marketing platforms, social media, and traditional marketing methods.
• Ability to work independently and take initiative in driving the marketing function.
• Strong communication and interpersonal skills to interact effectively with clients, domestic workers, and the team.
• Detail-oriented, with strong organizational skills to handle multiple tasks and responsibilities.

performance-based incentives.

• All project Control (Solar project )with Solar Technical Knowledge
• Project planning And handling with Subcontractors
• Well known Autocad Solar Edge Ms Office. Word Documents Photoshop
• Take The Bill Of Qty For Electrical, Aircon.P&S. Solar Panels And Technical Details
• Compilation of tender documentation for submission (M&E Only)
• Preparation For VO Claim & Amend the DWG with All Supporting Documents
• Preparation of Subcontractor's Claim, Enquiry of Quotation, Preparation of quotation comparision
• Sourcing and purchasing of materials and related products needed for Construction
• To do a daily progress report and have the initiative to report to boss without being asked at end of the day
• Arrange the Catalogue Submission For job Running Approval
• Arrange the OMM Drawing & Catalogue Submission
• Purchase knowledge & control the Budget with Value Engineering Knowledge
• Prefer Singaprean or PR

Job Description:

TLX Transport is seeking an immediate vacancy for a Shuttle Bus Driver to join our team. As a Full-Time Shuttle Bus Driver, you will play a crucial role in maintaining efficient and safe transportation services.

Responsibilities:

1.Directly report to the Operations Supervisor.

2.Follow all lawful instructions from superiors and the company.

3.Fulfill all assigned trip responsibilities.

4.Adhere strictly to assigned work schedules.

5.Ensure the safety of passengers, pedestrians, and fellow road users.

6.Provide exceptional and courteous services to passengers and customers.

7.Maintain the cleanliness of the bus consistently.

8.Ensure comprehensive maintenance according to scheduled requirements.

9.Assist in office duties during off-peak operation hours.

10.Perform any additional duties assigned by the company.

Requirements:
• Possession of a Class 4 Driving license
• Valid Bus Driver Vocational License (BDVL)
• Extensive knowledge of the operating area.
• Proficiency in using GPS devices.
• Minimum of 1-year driving experience.

.

Benefits:
• Competitive monthly salary
• Opportunity to join a dynamic and dedicated transportation team.
• Limited & Immediate placement.
• Chance to contribute to safe and reliable transportation services.
• Room for growth within the company.

If you meet the requirements and are eager to take on the responsibilities of a Bus Driver, please apply with your up-to-date resume and relevant licenses. Your dedication will ensure the smooth operation of our transportation services and the safety and satisfaction of our passengers.

Job Summary

The Lead Repair Development Engineer, Laser Ablative Technology, is responsible for designing, developing, and optimizing laser ablation processes in cooling holes clearing application. You will be part of AMRT (Advanced Manufacturing & Repair Technology) Breakthrough team and support industrialization of process around the global repair network to deliver quality and productivity, as well as transactional services growth.

Key Responsibilities:

• The focus for this role is to lead to identify, develop, industrialize, and globalize laser ablation processes for cooling holes clearing technology for the services network. This role can affect short-term and long-term business goals.
• Hands-on experimentation to apply and integrate advancements in laser technology to enhance process efficiency and quality
• Recommend approaches to meet the technical and program requirements.
• Understanding of laser system and ensuring compliance with safety standards.
• Identify project, develop, industrialize and globalize cooling holes clearing technology for the services network
• Collaboration with cross-functional teams on development and implement of technology
• Provide technical leadership to other personnel; mentor others in the organization
• Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures
• Monitor and communicate project status, business issues, and significant developments
• Lead or participate in organizational efforts in assigned projects and/or tasks
• Participate as a presenter or reviewer in technical and program reviews

Qualifications/ Requirements

• Bachelor’s Degree in Engineering, Physics, Chemistry, Materials from an accredited college or university
• Minimum of 10 years of manufacturing experience and at least 5 years of experience in Laser technology
• Experience in laser physics and ability to demonstrate a proactive approach to solving complex technical challenges through direct engagement with equipment and processes.
• Basic understanding of robotic concepts and systems, including vision systems and kinematics
• Ability and willingness to travel a minimum 10% of the time, as required
• Able to demonstrate experience in project management and hands on trials
• Strong analytical and problem-solving skills
• Ability to work collaboratively in a team environment
• Good communication and documentation skills

Technical coordinators provide basic administrative and light tech support services to assist with a project or the operation of a department. They often handle routine paperwork, data entry, preparing and processing of documents, and responding to general requests for information. They also assist with the creation of spec sheets, promotional collateral, and other materials. They may assist with billing, inventory, and logistical tasks, as well, and often relay information and materials between departments or individuals.

Electrical Design Engineer

Position Overview:

We are seeking a skilled and experienced Electrical Design Engineer to join our dynamic team specializing in marine vessel electrical propulsion and energy management systems. The ideal candidate will have a strong background in electrical engineering, a deep understanding of marine systems, and a proven track record of designing complex electrical systems for marine vessels. This role will involve working on cutting-edge technologies to enhance the performance, efficiency, and reliability of propulsion and control systems for various types of marine vessels.

Key Responsibilities:

1) Electrical Design:

• Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Develop detailed electrical schematics, wiring diagrams, and layouts using industry-standard design tools.
• Select appropriate electrical components, equipment, and materials to ensure compliance with safety, regulatory, and performance standards.
• Design and implement control logic, automation, and monitoring systems for propulsion and manoeuvring.

2) System Optimization and Performance Enhancement:

• Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Work closely with the research and development team to implement innovative technologies and solutions to address emerging challenges in marine propulsion and control.

3) Documentation and Reporting:

• Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.

4) Regulatory Compliance and Safety:

• Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.
• Collaborate with regulatory bodies and classification societies to obtain necessary approvals and certifications for electrical systems.

Qualifications and Skills:

• Diploma or Bachelor's degree in Electrical Engineering or related field.
• Proven experience (5+ years) in electrical design, preferably in marine propulsion and control systems.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.
• Familiarity with marine industry standards (e.g., ABS, DNV, IMO) and relevant regulations.
• Excellent problem-solving skills and ability to troubleshoot complex electrical issues.
• Effective communication skills for collaborating with multidisciplinary teams and presenting technical information to clients and stakeholders.
• Project management skills with the ability to manage priorities, timelines, and resources effectively.
• Willingness to travel overseas as required.
• Positive with a can-do attitude.

Key Responsibilities:

• Perform day-to-day warehouse duties, ensuring smooth operations.
• Receive and inspect incoming inventories, ensuring accuracy and quality.
• Prepare and organize outgoing inventories for timely dispatch.
• Maintain accurate and up-to-date inventory records.
• Monitor inventory levels and manage purchasing requirements proactively.
• Ensure the warehouse remains clean, organized, and safe.
• Collaborate effectively as a team member to achieve shared goals.

Working Hours & Benefits:

• 5-day work week: Monday to Friday, 8:30 AM to 5:30 PM.
• Guaranteed Annual Wage Supplement (AWS).
• Monthly fixed transport allowance.
• Overtime pay for additional hours worked.
• Annual performance appraisal with potential salary increments.
• 14 days annual leave.
• Comprehensive medical insurance.
• Work in a fully air-conditioned environment.
• Emphasis on work-life balance.
• Conveniently located within walking distance of Joo Koon MRT.

You will be part of an innovative and passionate team, working towards the one ultimate goal of producing high quality software. Your primary duties are design, prepare technical specifications, lead a team of developers, programming, unit-testing, and analytical problem-solving; but may include support for products implementation, integration testing and documentation.

The individual will:

• Responsible for the successful enhancement of software products and solutions by co-operating with other teams to ensure releases that are coordinated in terms of both time and technology.
• Design system architecture; translate user's requirements into functional and technical specifications.
• Participate and manage testing, debugging, verifying design and conduct reviews.· Participate and manage data and solution migration.
• Assist pre-sale in architect technical solution.
• To perform other duties as and when required.

Job Requirements

1. Good knowledge of Java, J2EE, Hibernate, Spring framework, Spring Boot, JSP, Oracle, Postgres, Struts and Restful Services, Spring Security, LDAP, XSLT,etc.

2. Experience on SOAP Service, JavaScript & jQuery will be an added advantage.

3. Experience in programming mobile application is added advantage

4. Experience with a responsive design for desktop/mobile.

5. Should have worked on 2-3 major projects.

6. Working experience with code versioning tools such as Git and SVN.

7. Effective communication skills in English.

8. Working in cross-functional teams and leading offshore outsourced development and support, Solution architecture consulting

9. 6+ years working experience as IT professional, with proven experience in solution architecture.

10. Wide knowledge and hands on experience in Open-Source Technologies

Administrator Responsibilities:

• Supporting company leadership and supervising administrative department activities for staff members.
• Greeting office visitors and directing them to the appropriate parties.
• Handling basic office tasks, such as filing, delivering mail, answering emails and phone calls, and data entry.
• Coordinating schedules and managing calendars for multiple parties to ensure that activities are properly arranged with no conflicts.
• Making travel arrangements and preparing documents, presentation materials, and facilities for meetings.
• Entering and updating company, employee, and client records.
• Ordering, storing and distributing office supplies.
• Maintaining, repairing, or replacing office equipment.
• Directing, reviewing, and optimizing office operations to increase accuracy, productivity, and efficiency and reduce costs.
• Providing basic bookkeeping services.

Administrator Requirements:

• High school diploma or equivalent.
• Degree in business administration or a relevant field is preferred.
• At 4-5 year's experience in administrative services or related fields.
• Additional education, certifications, or experience is advantageous.
• Understanding of accounting principles and bookkeeping software may be required.
• Familiarity with office technology and equipment, including computers, fax machines, scanners, printers, phone systems, etc.
• Exceptional verbal and written communication skills.
• Proactive, organized approach to multitasking.
• Strong leadership and interpersonal skills.
• Professional appearance, courteous manner, and clear, friendly phone voice.

Job Responsibilities:

• Planning of project works schedules and controlling the costs of the project.
• Prepare weekly and monthly progress reports to be submitted to the Manager.
• Resource planning such as manpower, material and equipment for the project.
• Liaise with clients on-site on work matters.
• Check shop drawings from the Design Department and from the clients to eliminate any problems on site construction.
• Troubleshoot problems on-site in order to ensure delays are minimized and additional costs reduced.
• Provide technical and practical support to supervisors and foremen to assist them in the construction process.
• Preliminary design of temporary elements for site use or for tender purposes.
• Wastage and productivity control on site.
• Ensure compliance with Company's IMS process and procedures.
• Ensure OSH risk assessment and EMS impact & aspect register are conducted and implemented in company operations.

Pre-requisites:

• Excellent oral and written communication skills in the English language.
• Outgoing personality and service-driven with a positive and "can-do" attitude.
• Proactive and self-motivated in problem-solving.
• Ability to read and interpret drawings.
• Strong time management and project management skills.
• Proficient in the use of AutoCAD software.

Working Environment:

• 5.5-day work week, Monday to Saturday
• Visit project sites is required