Job Description:

1. Preferred experience in all commercial vehicles & big trucks.
2. To perform vehicle inspection checking, vehicle servicing, repair, engine overhaul, and replacement of components/parts.
3. Troubleshoot vehicle problems using diagnostic equipment.
4. Test parts and systems to ensure that they are working properly after repair.
5. Use testing equipment to ensure repairs and maintenance are effective.
6. Any other ad-hoc duties assigned by the Manager.

Requirement:

1. Minimum 5 years automotive workshop experience.
2. Able to start work immediately.

Brief Summary:

The Senior Cost Accountant plays a pivotal role in overseeing all costing matters at Edmund Optics Singapore and Malaysia. Taking charge of critical responsibilities such as analyzing and resolving cost variances, performing inventory and standard cost accounting, this role demands strong analytical and problem-solving skills with a deep understanding of costing principles.

Job Description:

· Responsible for the full range of costing matters of the Malaysia & Singapore manufacturing plants using SAP ECC6/S4Hana.

· Review the factories’ current month cost variance and work with the production department to resolve variance and costing issues before closing the month-end. Analysis using SAP ECC6 and/or Power BI Dashboards

· Develop, train, implement, lead and monitor manufactory costing models and policies and make recommendations to improve/stabilize procedures and policies

· Report and analyze operational variances, including production order variances, purchase price variances, manufacturing variances inclusive of inclusive of machine, labor, and overhead.

· Perform inventory and standard cost accounting and control, participate in annual budget exercises focusing on operations

· Assist in the cost roll-up, obsolescence review for inventory, and annual WIP count

· Lead and review the cycle inventory count for the manufacturing plants and provide recommendations for process improvement.

· Assist and support in closing monthly accounts, timely submission of accurate financial reports, analysis, forecasts, financial statements, compliance with appropriate accounting standards, Transfer Pricing, and regulatory requirements.

· Analyze reports used in the quoting process to include burden and break-even analysis.

Qualifications Required:

· Minimum Bachelor’s Degree in Accounting or Finance

· At least 4 years of experience in manufacturing costing, finance and manufacturing accounting.

Skills & Abilities Required:

· Advanced Microsoft Excel skills

· Knowledge in Cost Analysis and Financial Principles.

· SAP ECC6 experience is essential; S4HANA experience is an advantage

· VBA programming experience is an advantage

· Committed team player with a positive learning attitude, self-motivated, and good communication skills.

· Experience working with a US Company and cross-cultural finance team, especially in Japan, China, Germany.

· Able to travel Internationally.

Interested applicants may also send your resume to [email protected]

Join Our Team at the School of Physical and Mathematical Sciences, Nanyang Technological University, Singapore

The School of Physical and Mathematical Sciences (SPMS) at NTU Singapore hosts research and education activities in two divisions: Division of Mathematical Sciences (MAS) and Division of Physics and Applied Physics (PAP). MAS covers diverse topics ranging from pure mathematics to the applications of mathematics in cryptography, computing, business, and finance. PAP covers many areas of fundamental and applied physics, including quantum information, condensed matter physics, biophysics, and photonics. Over the years, SPMS has attracted talented individuals from around the world and Singapore to join as scientific leaders and researchers.

We are looking for a highly motivated Research Assistant to join Associate Professor Xia Kelin's team at the School of Physical and Mathematical Sciences. The project focuses on integrating high-dimensional topological structures with advanced simplicial neural networks, and applying these methods to real-world data from dynamical systems.

Key Responsibilities:

• Contribute to the development and implementation of topological data analysis techniques such as simplicial neural networks, with application in real data sets from dynamical systems
• Perform data preprocessing, feature extraction, and analysis on large datasets
• Preparation of research papers, reports, and presentations to disseminate findings
• Participate in regular team meetings and contribute to the overall progress of the project

Job Requirements:

• A Bachelor’s degree in applied mathematics or related areas, with a strong background in topological data analysis (TDA) and machine learning on biomolecular data
• Experience with biomolecular data, particularly protein, DNA, and RNA data, knowledge of structural biology and protein modeling preferred
• Proficiency in programming languages such as Python, R, or similar
• Excellent analytical and problem-solving skills
• Ability to work both independently and collaboratively in a team
• Previous research experience and publication record in a related field preferred

The College of Science seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

We regret to inform that only shortlisted candidates will be notified.

ob Description & Requirements

The position holder is responsible for helping an organization create and execute schedules, manage company budgets, greet and communicate with staff and guests, and maintain effective workflow in the office. He/She may also take on many other duties regularly associated with office management, including filing, creating memos and reports, and performing other clerical duties. He/She needs to provide office support to either an individual or team which is vital for the smooth running of a business. Their duties may include fielding telephone calls, receiving and directing visitors, word processing, creating spreadsheets and presentations, and filing.

Key Tasks:

• Handle all incoming calls and assist accordingly
• To check all service reports & input into the database
• Forward reports to Service Manager and Engineers and arrange follow-up with service terms
• Assist sales and project with contract renewal and to quote
• Preparation of service agreements and work orders for submission
• Assist in purchase request form service and send back to HQ for PO generating and get PO signed
• To receive all DLPs from HQ and follow up with Manager

Requirements:

• Candidate must possess basic intermediate certificate in accounting or certified in office administration.
• Minimum 2 years of experience is required for this field.
• PC literate (Microsoft Word, Excel, and PowerPoint).

Personal Competencies:

• Possess initiative and the ability to work independently
• Team player with good interpersonal skills
• Able to work with minimum supervision
• Able to communicate to all level
• Positive attitude and self-motivated personality

Job Highlights:

• Positive working environment
• 5 Days Work Week
• Attractive job package
• Flexible Work Arrangement (FWA)
• Age-Friendly Workplace Practices

Position Summary

The Lab Analyst will be working in the Analytical Service Laboratory in compliance with ISO/IEC 17025 standards, plays a multifaceted role that encompasses precise chemical analysis, adherence to quality management systems, assist in the analytical method development, handling LIMS platform and active participation in production-related activities. This position is designed to contribute to the laboratory's commitment to ISO/IEC 17025 standards and involve in CAPA for sample analysis while also supporting production processes to meet organizational objectives.

Major Position Responsibilities

The Lab Analyst, will be responsible for maintaining compliance of laboratory activities with Employee Health and Safety (EHS) requirements which includes adhering to all quality and the laboratory's standard operating procedures, including those for calibration and maintenance of equipment and performing routine maintenance on laboratory equipment and instruments. The Lab Analyst works with minimum supervision and independently in the laboratory, plant and/or manufacturing area, he/she will also be able to coach and collaborate with junior staff including the production team or other teams in the organization when required. He/she is a team player that can work independently, organized, and possesses good analytical and communication skills. In addition, the Lab Analyst should implement continuous improvement initiatives and activities for the laboratory.

Principal Duties and Responsibilities

• Perform daily analysis of internal and external samples including urgent analysis requirements to support plant product, IQC,Raw materials samples, onsite plant UPW monitoring.
• Perform analysis qualitative and quantitative chemical analyses or chemical experiments in laboratories for quality or processcontrol or to develop new products or processes.
• Daily calibration/standard preparation, analytical instrument tuning and performance monitoring, performmaintenance/troubleshooting when necessary and keep track on the parts/consumables.
• Data key in LIMS, make calculations and interpret test results to determine if process changes are needed.
• Chemical inventory and waste disposal management.
• Set up, operate, and maintain laboratory instruments and equipment, such as spectrophotometers, chromatographs, and flameionization detectors.
• Clearly labelling of all chemicals for storage and disposal of chemicals in a safe and responsible manner.
• Keep accurate and up-to-date records of all calibrations and maintenance.
• Performs other duties as assigned by the Lab Manager.

Education Background and Experience

• Min. Diploma in Chemistry or chemical-related discipline
• 3-4 years of experience in the chemical manufacturing industry.
• Possess knowledge and experience in 1- 2 years ICPMS/OES.
• Possess some experience supervisory skills or competency in ISO/IEC 17025
• Experience in writing SOP.
• Possess skills in method validation.
• Gas Chromatography FID detector skills will be an added advantage.
• Must have experience in analytical laboratory setting.

Other information:

• Able to differentiate colors for work purposes
• Able to handle acid/base chemicals and solvent for work purposes
• Clean room and non-clean room area in laboratory.
• Protective clothing, such as gloves, aprons, and safety glasses, are worn usually while working in a chemical laboratory.
• May need to enter plant or manufacturing area for Online measurement Ultra-pure water monitoring and retain sample storage area.
• Working overtime when required

• Loading and unloading of goods onto vehicle according to delivery order
• Perform pickups and collection for the company covering specific areas
• Ensuring safe receipt, retrieval and dispatching of goods
• Delivering goods to our customers in a safe, courteous, and timely manner
• Establishing and maintaining excellent customer service during delivery
• To perform duties as tasked
• Class 3/4 Driving Licence
• Able to work night shift and split shift
• Able to work ot on weekend and public holiday
• · Must be able to work night shift and split shift
• · Must be able to work extra hours or weekend if needed

The incumbent is responsible for managing all phases of the project activities including planning, implementation, execution and completion of gas and chemical supply equipment, installation and certification. He/She will have direct interface with the Project Manager or FAETH associated companies

JOB DESCRIPTION

• To manage, lead and control multi-projects.
• Direct interface with customers or sub-contractors for all aspects of their project contract and schedule including organising the project meeting for technical presentations, contract reviews and design reviews and providing project progress reports for management or customer review.
• Direct interface with other Faeth associated companies in managing the resources and obtain the necessary engineering, design or process information required to manufacturer, install and qualify the system and equipment.
• To take charge in project planning and implementation including developing detailed project plans defining project task and to manage project resource allocation and project budget, scheduling of project timelines and tracking of project deliverables to meet the project targets.
• To liaise and manage suppliers and subcontractors to complete system or equipment installation works.
• To coordinate with the onsite subcontractors, Faeth team and the customer for equipment testing, operation and commissioning activities.
• To observe the Quality Management function and Project Quality Plan (QMS/PQP) and Safety Management System (SMS) and requirements throughout the project.
• To implement best practices throughout the project sites and participate in discussions with the teams for effective management and utilisation of constrained resources.
• To prepare and manage all safety inclusive of Work Method Statement, Risk Assessment, Permit to Work and others permit associated with the work.
• To prepare, manage, and maintain service reports & permits to work as required by the customer for equipment related items.
• To work towards the project schedule as planned and ensure that the equipment works as per the contractual specification.
• Commissioning activities as planned plus ensuring that the equipment works according to its specifications.
• To prepare, collect, review, manage, and maintain project design and start-up documentation (certificates, test sheets, etc) with customers, consultants and the authorities required by customers for final acceptance of the system or equipment.
• To ensure the certification of all systems and equipment supplied to the customer.
• Responsible for acting on, and solving all design or start-up related issues and customer complaint as swiftly as possible, with a minimum of inconvenience to the customer, and to keep the customer and Project Manager up-to-date on actions taken, together with a time plan for which the identified issues can be resolved.
• To perform maintenance and calibration and sampling tasks / duties as per Standard Operating Procedures (SOP) and Working Instructions (WI) as required.
• To perform preventive and corrective maintenance as scheduled; attend to unplanned downtime or breakdowns across all Faeth equipment & systems and dispatch personnel as required.
• To investigating problems, diagnosing/repairing faults and carry out field troubleshooting and repair of Faeth products at customers’ site both locally & overseas including component ordering.
• To provide training to end customer for Faeth equipment supplied based on the user manual, providing technical instruction and assistance to customer regarding installation, commissioning, operation, repair and maintenance of equipment.
• To collect feedback on customer’s experience or products quality issues and report to Product Design Team for product improvement.
• Upon completion of a project to participate in post mortem meeting with management for evaluation of the project results and project problem faced and provide recommendations to Management for future improvement.

JOB REQUIREMENTS

• Diploma/degree in Mechanical/Electrical/Chemical or equivalent
• At least 1 to 2 years’ experience with strong understanding of project planning, project management functions, sourcing and technical planning in semiconductor, oil & gas field.
• Fresh Graduates are welcome to apply for the position.
• Ability to communicate and interact with people at all level and to work cross functionally.
• A team player and a self-starter with the ability to work independently with minimum supervision.
• Strong analytical, planning, oral and written communication and interpersonal skills.
• Able to work in a fast pace and dynamic environment.
• Knowledge of Microsoft Project, AutoCAD or equivalent CAD/3D Software desired but not a must.
• Willingness to travel and be site-based.

An attrative remuneration package with comprehensive insurance coverage awaits the right candidate.

• The Sales Executive will manage his/her Sales Channel and reports directly to the CEO
• Develop effective sales strategy to grow existing accounts as well as identifying new channel opportunities to drive incremental sales
• To work closely with customers and build long term relationship
• To handle customers’ feedbacks professionally
• To work closely with the sales team in achieving the sales objective for the month, quarter and year.

Job Requirements

1) Have at least 3 years relevant experience in Singapore

2) Manage various fruit stalls in Singapore and its employees

3) Must be knowledgeable about vegetables and fruits from various countries and states

4) Have knowledge about the pricing and quality of vegetables and fruits

5) Need to train staff assistant

6) Be able to identify sales trends

7) Able to work on split shift, night shift, weekday evenings, weekends and public holidays during peak seasons.

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

Benefits:

• Basic Salary up to $6,000 with yearly increment based on performance.
• 5.5 Days (Monday to Friday, 8am to 5pm)/(Saturday, 8am to 12pm)
• Our company emphasises on good career progression

Job Description:

This is a full time role for a Senior Service Engineer (Ship Cranes) located in Jurong East. Our company is an international crane & deck machinery repair specialist and offers crane and deck machinery related repair services and parts supply to the Merchant Marine- and Offshore industry and you will be responsible for field service tasks, including troubleshooting and repairing deck cranes, grabs, windlasses, hatch cover hydraulics, and davits.

Qualifications:

• Min 5 years' experience sailing as Electrical Officer on bulkers equipped with deck cranes and has carried out troubleshooting and repairing Marine Cranes, Windlasses & other hydraulic systems on board,
• In-depth knowledge and understanding of PLC controlled electro-hydraulic cranes & hydraulic machinery.
• Able to read and comprehend electric and hydraulic diagrams.
• Able to independently troubleshoot electrical, hydraulic and mechanical problems.
• Able to supervise a team of mechanics and carry out large repair projects as Lead Engineer on board, on voyage and in Ship Yards.
• Able to write technical reports and able to communicate with owners' representatives.
• Previous employment as service engineer with one of the leading deck crane manufacturers will be an added advantage.
• Experience with variable frequency drives (VFD) will be an added advantage

Job Description

• Maintain mechanical equipment, systems and processes to meet requirements, applying knowledge of engineering principles
• Provide technical support to optimise process capability of production line, ensuring smooth and efficient output.
• Assist in Product samples making prior to mass production based on customers specification
• Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
• Hands-on applications are expected

Job Requirements

• Higher Nitec or Diploma in Mechanical Engineering
• Must be able to understand Mechanical Drawings
• Able to design with SolidWorks or similar
• Able to communicate with Chinese customers and English-speaking vendors.
• A team player

We are Hiring!

We are looking for hardworking, responsible and fun individuals like you, to join our team!

Roles: - Full time Dental Assistant -

(Training will be provided)

Your job duties will be as follows:

● Work closely with the dentist, helping throughout a patient's visit in a safe and effective manner

● Assist dentists at chairside for dental consultations and procedures

● Establish and maintain productive relationships with all members of the dental team

● Ensure that treatment area is regularly cleaned and maintained, paying all due attention to relevant legal and ethical codes

● To keep and maintain accurate patient records

● To liaise with and cooperate with the Clinic Manager on all matters concerning administration, pay, and service conditions

● Support and participate in practice meetings, support the achievement of KPIs and Quality Controls

● Plan and execute marketing strategies in consultation with the Clinic Manager

● Maintain a professional look at all times

● To assist at the reception and perform any other administrative duties as may be required

If you are willing to learn, fun-loving and willing to take on this challenge, what are you waiting for?

Young and research-intensive, Nanyang Technological University, Singapore (NTU Singapore) is ranked among the world’s top universities. NTU’s College of Computing and Data Science (CCDS) is a leading college that is known for its excellent curriculum, outstanding and impactful research, and world-renowned faculty. Today, we are ranked #2 for AI and Computer Science by US News Best Global Universities; and #8 for Data Science and AI by QS World University Ranking.

A hot bed of cutting-edge technology and groundbreaking research, the College aims to groom the next generation of leaders, thinkers, and innovators to thrive in the digital age. Located in the heart of Asia, NTU’s College of Computing and Data Science is an ‘exciting place to learn and grow'. We welcome you to join our community of faculty, students and alumni who are shaping the future of AI, Data Science and Computing.

The College of Computing & Data Science (CCDS) invites applications for the position of Research Associate.

Key Responsibilities:

• Independent research in the field of personalized federated learning.
• Supervising undergraduate students and research staff.
• Help with the preparation of research proposals.
• Help with supervising the development of research platforms.

Job Requirements:

• Master’s degree in Computer Science from a reputable university.
• Good publication track record.
• Previous research experience in machine learning / AI a must.
• Previous experience in the topic of personalized federated learning will be an advantage.

We regret that only shortlisted candidates will be notified.

Responsibilities

.1 Accountable to Fleet Manager.

.2 As a Fleet Member, he shall assist FM in implementing Fleet Management System. He shall with his best endeavour to advise FM in relation to performance of the assigned vessels.

.3 Ensure that the vessels under his supervision have on board all the required valid statutory, class and other trading certificates.

.4 Ensure that the vessels under his supervision are manned according to Safe Manning Certificate and that all crew have valid documents required by STCW and flag state.

.5 In co-ordination with the Master and the Chief Engineer, to prepare a PLANNED MAINTENANCE PROGRAMME for submission to the GM at the beginning of the year for the LONG TERM STRATEGIC MAINTENANCE PLANNING.

.6 Monitor the maintenance routines of the vessels under his supervision and ensure that maintenance, inspections and testing are carried out as planned and are not left overdue.

.7 Carefully scrutinise all SPARES AND STORES REQUISITIONS from the vessel before approval for quotations and ordering.

.8 Ensure that the vessel submits technical and other reports in a timely manner.

.9 Review all technical reports submitted and take actions for any non-conformance or below par performance.

.10 Review the vessel's performance in terms of speed, fuel and lub oil consumption and take corrective actions in time.

.11 Study the fuel oil and lube oil analysis reports and advice the vessel of the action to be taken.

.12 To review the budget v/s actual performance of the ships under his care and take corrective measures by way of controlling expenditure, and if the situation demands, submit a proposal for the revision of the budget and approach the management with the appropriate data.

.13 To prepare and submit a quarterly report for customers on the vessels under his care and should cover at least the following:

a) Vessel’s Routing

b) Vessel's Condition

c) Survey and Certificates Status

d) Crew and Personnel Matters

e) Off-hires, if any

f) Accounts (Budget vs. Actual)

g) Class Status Report

h) Photos

.16 Preparation of dry-docking specifications, making a comparative chart of quotations received from various yards and obtaining the Management or Owner's approval.

.17 Visit the vessels at appropriate intervals as per approved ship visit plan and inspect them as per the procedures laid down.

.18 Carry out any additional work assigned by the FM.

.19 Apart from their technical responsibilities, a Technical Superintendent is required to ensure that he is familiar with all the commercial aspects and other commercial related details of his vessels, such as:

a. Relevant clauses of Charter Party such as speed and consumptions, cargo exclusion and others;

b. Contents of Charterer’s voyage instructions such as tendering NOR, clausing B/Ls and Mate’s Receipts, cargo holds cleanliness, Stevedore’s damage reporting and others;

c. Reporting requirements from Charterer or Sub-Charterer;

d. Arranging pre-loading surveys for certain cargoes;

e. Lodging sea protests;

f. Handling protests from shippers, receivers and Charterers;

g. Lodging insurance claims, collecting evidence and following up until closure;

h. Pre-arrival reports required by various port states such as eNOA/D, ballast watr exchange reporting and others;

Authorities

.1 Move to Fleet Manager

.2 Review and Approve spares and stores for any given requisition as per OPM 9, purchasing and supplies procedures..

.3 Recommend the promotions or repatriations of crewmembers on his assigned-vessel.

.4 Sanction spares and stores for the vessels under his care.

.5 Approval of bills for spares, stores and repairs.

.6 Approval of the DRYDOCKING bills after due clearance from the MD

.7 Approval of orders for emergency stores and provisions for the vessels.

.8 Appraise shipboard senior staff & feedback to the Fleet Manager.

.9 Other roles and responsibilities delegated by Fleet Manager.

Job Description & Requirements

Roles & Responsibilities

• Manage change order/ variation claim from subcontractors and prepare change order/ in support of variation order claims to client, and keeping track of all change orders.
• Work closely with Project teams/ various disciplines (Engineering, Construction, Procurement, Subcontractors, etc.) and coordinate the timely contract price adjustment/ claims including internal reviews/ approvals
• Manage full spectrum of respective subcontracting works, measurement/ bill of quantities, cost plus and adjustable items as per claim requirements.
• Works closely with all stakeholders include procurement teams to support timely contract price adjustment
• Ensures all POs and WOs and payments flow from procurement & subcontractor team into the Project Cost Code system
• Prepare tender/ subcontract document, bid/ subcontract checklist and prepare bid/subcontract evaluation and summary
• Ensure main contract terms, project specification and requirements are incorporated in the bid documents and subcontract document
• Monitor, review and check subcontractors’ milestone/progress claims and invoice on timely manner, and coordination with internal cost control/ finance department for payment processing
• Manage/ administer the subcontracts with subcontractors
• Issue work order
• Organise kick off meeting and other ad‐hoc meetings with subcontractors
• Handle and maintain performance securities with subcontractors
• Manage day to day contractual correspondences with subcontracts including contractual letters preparation and tracking of incoming/outgoing letters
• Procure all subcontracting work within budget and in accordance to comply financial guideline
• Monitor subcontracting cost and ensure within allocated budget
• Finalises project final accounts settlement with subcontractors and close out
• Participate in monthly cost review, if required. Manage warranty/ defect claims if any
• Participate in Project meetings, interface with cost control, procurement and others.
• Ad hoc assignment

Requirements:

• Degree in any Engineering disciplines
• 3‐5 years of experience in contracts administration
• Familiar with offshore platforms, modules, FPSOs, jackets, etc. and onshore petrochemical plants will be an added advantage
• Good team player and able to work independently with minimal supervision
• Willing to commit overtime as and when required

Job Scopes:

• Responsible for the sales of the company product, development of new customers and new business, and maintain relationship with customers.
• Responsible for contacting customers, preparing quotations, and participating in business negotiations.
• Responsible for tracking customer orders until delivery and payment collection.
• Conduct market survey, market information, and customer database files.
• Perform any other tasks as and when required by management and superior.

Job Requirements:

• Candidate must possess at least a Professional Certificate/Diploma/Degree in related field or equivalent.
• At least 2 year working experience in commercial and industrial air-con industry or related field.
• Prefer candidate with B2B sales experience with some client’s pipeline.

Singaporean / Permanent Resident / Sijil Pelajaren Malaysian Certificate

Full-Time
Working hours: Mon to Fri: 8:30am to 5:30pm

Sat: 8:30am to 12.30pm

Transportation provided at Joo Koon/Tuas Cresecent MRT

About our group:

Servo team spans the globe from Singapore to the United States. We invent and deliver servo electronics and code to satisfy all HDD product requirements. We also develop the required test and debug systems hardware and software to build, debug and validate servo systems in HDD products.

The is an individual contributor role, reports to the Manager, based in Singapore.

About the role - you will:

• Bring up newer generation and maintain existing preamp related driver code.
• To Involve in development of next generation servo demodulation channel and SOC.
• Failure analysis on servo demodulation related drive failures.
• Develop new algorithms to enhance the robustness of servo system, especially servo channel, Preamp and power management.
• Be part of the team responsible for improving servo code process.
• Be part of the global servo team to deliver best in class servo design.

About you:

• Not afraid to take on unfamiliar engineering tasks and willing to learn.
• Naturally inquisitive with a strong inclination in technical research.
• Flexible working hours to attend either early morning or evening conference calls with global counterparts.
• Able to work under pressure and meet aggressive deadlines without compromising work quality, while maintaining a positive attitude
• Take initiative, teamwork and self-motivated.

Your experience includes:

• Bachelor’s degree or higher and/or equivalent experience
• Experience in programming languages, such as C, Python and MATLAB.
• Familiar with real time embedded systems and digital signal processing.
• Familiar with Perforce, Jira systems will be an added advantage.
• At least five years’ experience of HDD servo systems, HDD manufacturing process, servo related failure analysis, servo test, data crunching and analysis.

You might also have:

• Strong analytical skills

We are looking for a compassionate and enthusiastic team player to join us as an Assistant Programme Executive at Active Aging Centre @ Marsiling. The Assistant Programme Executive assists with the centre activities and clients at the centre

- Plan and prepare monthly activities schedule for clients.

- Engage with the clients during the activities.

- Pack and distribute food ration packages.

- Assess clients’ need and make necessary referrals to appropriate agencies and/or various care services.

- Manage and maintain all necessary documentations and paperwork of clients’ data and centre activities.

- Maintain the general cleanliness of the centre.

- Assist the centre manager on any other ad-hoc duties.

Job Responsibilities:

• Handle full-set accounts for our clients
• Perform timely closing of monthly & yearly accounts and preparation of GST returns
• Prepare detailed Profit & Loss and Balance Sheet
• Prepare salary listing, fixed assets register and bank reconciliations
• Prepare audit schedules for auditors

Job Requirements:

• Experience preparing full-set accounts in accounting firm
• LCCI Level 3 / ACCA / Diploma / Degree in Accountancy or equivalent qualifications
• Software guidance will be provided
• Able to start immediately

Job title – Sales Director, FFE Asia

Location – Singapore

Job model – Hybrid

As the Sales Director, FFE Asia, you will ultimately be responsible to develop and lead the FFE Asia, Southeast Asia commercial team, to forging strategic partnerships, lead the execution of FFE Asia strategic plans in SEA, and crafting innovative solutions that captivate clients in diverse markets. Your priority will be to drive further business growth in SEA region, in close collaboration with the local team members of FFE Asia and P&B.

At dsm-firmenich, people are at the heart of the company. We are committed to equal employment opportunities and value diversity in the workplace.

Your key responsibilities

• Develop the overall commercial strategic plan, to defend existing business and to capture new business opportunities for FFE Asia in SEA, to ultimately drive revenue growth at a sustainable margin
• Accountable for P&L of FFE Asia SEA, good management of vitality, adoption rate & growth ambition for the region, and drive and accelerate our market share growth with priority on regional clients like Wipro and other emerging brands.
• Identify and prioritize new business and specific customer opportunities through the establishment of internal and external networks, and through the sourcing and application of good market intelligence.
• Work and partner closely with project management team composed of perfumers, fragrance development, technical, consumer insights and marketing professionals.
• Work closely with other FFE Asia team members in China and India, creating synergies between sub regions connecting with FFE Asia PLU leader and leading a high performing & strong collaborative culture within the teams.

You bring

• At least 10 years of solid track record in account management
• Ability to provide strategic and clear direction and build a high performing team
• Bachelor’s Degree in business management, Business Economics, Chemistry or any other relevant discipline
• To lead and inspire the local commercial team to drive strong performance and account plans
• Strong customer-centric mindset with the ability to build and maintain sustainable customer relationships, with high ethical standards in all interactions
• Be a role model as a leader and ability to coach and nurture the team

We bring

• A rich history and a promising future of bold scientific innovation and passionate creation with our customers;
• A space to grow by encouraging and supporting curiosity and an open mindset;
• A culture that prioritizes safety and well-being, both physically and mentally;
• The opportunity to work for a company where sustainability is much more than a claim and is core to our strategy and purpose;
• A flexible work environment that empowers people to take accountability for their work and own the outcome;
• Barrier-free communities within our organization where every employee is equally valued and respected – regardless of their background, beliefs, or identity;

Equal Opportunities Commitment

dsm-firmenich is fully dedicated to inclusion because when people feel engaged and empowered, their creativity and innovation drives unprecedented progress. We aim to build a workplace where opportunity really is equal, so everyone can thrive. We do not discriminate, there’s a place for everyone at dsm-firmenich.

dsm-firmenich is an Equal Opportunity and Affirmative Action Employer. dsm-firmenich people are as diverse as our customers. For us that includes a commitment to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.

We are committed to providing reasonable support for disabled applicants in our recruiting process. Should you need assistance, and are comfortable to share this, please let us know.

About dsm-firmenich

As innovators in nutrition, health, and beauty, dsm-firmenich reinvents, manufactures, and combines vital nutrients, flavors, and fragrances for the world’s growing population to thrive. With our comprehensive range of solutions, with natural and renewable ingredients and renowned science and technology capabilities, we work to create what is essential for life, desirable for consumers, and more sustainable for the planet. dsm-firmenich is a Swiss-Dutch company, listed on the Euronext Amsterdam, with operations in almost 60 countries and revenues of more than €12 billion. With a diverse, worldwide team of nearly 30,000 employees, we bring progress to life™ every day, everywhere, for billions of people.

www.dsm-firmenich.com

Reporting to Shift Supervisor, this position will execute and maintain manufacturing process operations by physically performing the task of process control, equipment monitoring and in-process analysis to ensure the production process strictly follows company safety standards and environmental regulations and product quality is within customer's requirement.

Responsibilities:

• Support Shift Supervisor in handling plant start-up, shutdown manufacturing process according to established procedures
• Support production activities such as in-process quality testing, catalyst preparation, equipment preparation for maintenance, loading & unloading of process solvents
• Perform all routine task required to maintain manufacturing process such as monitor process parameters, plant patrolling, data logging and housekeeping
• Perform safe work practices through following safety regulations and supporting safety programs
• Ensure safe working conditions through taking corrective actions to maintain equipment and process condition within safe operating limits
• Perform company emergency response in areas of firefighting, rescue and loss containment
• Maintain plant safety equipment through routine checks
• Execute predictive maintenance to identify and prepare equipment for maintenance before breakdown
• Prepare or update standard operating procedures based on acquired experience and new technical know-how

Requirements:

• Diploma in Chemical Engineering or Chemical and Pharmaceutical Technology, NITEC in Chemical Process Technology or Higher NITEC in Chemical Technology or a related discipline with at least 4 years of relevant experience
• Entry level candidates without experience are welcome to apply
• Knowledge in Distributed Control System will be advantageous
• Effective team player with good communication skills and high self-motivation
• Able to perform rotating shift work
• Able to perform overtime work when required
• Willing to work in Jurong Island

Architectural Glass Manufacturing Company requires

Marketing Executive

It is the responsibility of this role to oversee all aspects of product marketing using a variety of tools. This includes maintaining and enhancing current marketing tools utilized by the Company, such as the website and CRM systems. Additionally, the individual in this role will be responsible for creating daily and monthly Company write-ups for newsletters and other marketing materials. Market research will also be essential in order to identify, anticipate, and meet the needs of consumers.

Furthermore, the individual in this role will be required to maintain the Company's branding image, as well as oversee product marketing and the launch of new products in various markets.

Job Descriptions and Duties:

· Gain market insights and business intelligence

· Develop and implement relevant marketing strategy and action plan to promote the company’s product and services

· Implement strategies in an effective and timely manner to achieve results

· Conduct review of strategies and results

· Responsible to extend Company brand awareness; product marketing; public relations; launch of new products; project manage participation in exhibitions and/or conferences and other industry events

· Create and manage marketing campaigns across various platforms, such as social media, email, and print

· Update and maintain company website

· Conduct market research; publish monthly newsletter

· Monitor and analyse the performance of marketing campaigns to optimize results

· Provide regular reports and updates to senior management on marketing activities and outcomes

· Collaborate with sales team to generate leads and drive revenue growth

Requirements:

· Diploma or Bachelor in Business Studies or Marketing

· Minimum 1-2 years’ experience with business marketing or business development

· Possess initiative and passion for innovation

· Must possess integrity and drive

· Able to work independently

Interested applicants, please send complete CV stating details of qualification, experience, current and expected salaries to:

SINGAPORE SAFETY GLASS PTE LTD

112 Pioneer Road Singapore 639593

Email: [email protected]

Only shortlisted candidates will be notified

Requirements:

• Posses valid class 4 driving license
• Familiar with roads in Singapore and driving regulations
• Reliable, punctual and good work ethic

Responsibilities:

• Perform driving duties
• Delivery/Carry of goods
• Ensure vehicle is well maintained and meet all safety requirements
• Prepare and complete orders for delivery or pickup according to schedule (load, pack, wrap, label, ship)
• Keep a clean and safe working environment and optimise space utilisation
• Ensure documents are signed upon collection/delivery of goods
• Coordinate and liaise with the users, clients and colleagues
• Organize, allocation & storage of goods with proper documentation/report recorded
• Adhoc duties assigned by company

We are looking for an experienced Facilities Management Lecturer, as a Lecturer your contributions go beyond teaching and facilitation learning.

You should have at least 3 years of relevant teaching and experience in one or more of the following fields

Diploma in Facilities management

Diploma in Hospitality and Tourism

Diploma in Logistics and Supply Chain Management

Diploma in Business and Retal Management

Diploma in International Hospitality Management

Diploma in Housekeeping and Maintenance Operations

Higher Diploma in Global Hospitality, Tourism and Event Management

Post Graduate Diploma in Hospitality & Project Management

· You must possess a minimum bachelor’s degree in any related field

· You should also possess an attitude of professionalism, an eye for detail, and strong skills in customer service and communication.

· You must be a team player and have a strong passion to teach related modules.

· Candidates with relevant training and good presentation skills are preferred.

· Candidates are required to be bilingual in English and Mandarin.

Job Description

• Create shop drawings from construction drawings, hand-drawn sketches and verbal Preparation of shop drawings.
• Able to prepare fabrication drawings and cutting lists for preparation of materials.
• Preparation of as-built drawing submission upon project completion.
• Quantity taking off of materials for material ordering.
• Liaise with project site team in shop drawing detailing and other necessary coordination.
• Ensure final designs comply with regulations, quality standards, clients' specifications and company's standards.

Requirement

• Degree in Civil Engineering or Building.
• Minimum 2 to 3 years’ of working experience in related field.
• Knowledge in structural steelwork and metalwork will be an advantage.
• Familiar with Tekla Structures software.

Interested candidates, please email detailed resume to [email protected]

• Responsible for all site works and activities
• Ensure effective project planning and implementation, efficient use of resources, and proper co-ordination and delegation of works to successfully complete project by the contractual deadline and within the budgeted cost.
• Ensure all works carried out meet company’s quality standards and requirements
• Engage and coordinate internal resources, engineers, consultants, and solar installers in preparation and execution of project plans through completion.
• Review and take ownership of project budgets including cost of permits and fees, third-party consultants, and construction costs for off-site, site work.
• To ensure site supervisors, foremen and workers comply with client & regulatory requirements
• To ensure high Environmental, Safety and Health standards are upheld on site at all times
• Other ad hoc duties assigned by company from time to time