• Collect the necessary data and details from the project team/customer before preparing the drawings
• Prepare shop drawings for submission and approval
• Attend project meeting and measurement on site for drawings preparation
• Prepare 3D drawings where necessary
• Prepare as built drawings when project completed

PURPOSE

• Surveyors is to ensure all ISO Tank Containers turned into our depot are surveyed, cleaned and repaired to the customers requirement standard criteria comply to ITCO/ACC or owner criteria.

SCOPE

• Surveyors is to ensure all ISO Tank Containers that have been accepted by MW Tank Depot.

RESPONSIBILITY

• Surveyors is to ensure that all ISO Tank Containers turned into our depot must conduct surveyed.
• Surveyors’ responsibility for all the ISO tank containers turn into depot are thoroughly survey correctly and to ensure the documents are endorsed before issued the Equipment

JOB DESCRIPTION

• All ISO tank containers turn into depot, surveyors ensure to stick a yellow and red colour
• Sticker onto the Left-Hand Side of the corner post before off load.
• Surveyors must coordinate with the Leese/Lessor independent surveyor for joint inspection.
• As part of a Surveyors duties, ensure to conduct thorough inspection after the cleaning, repaired and testing completed.
• Surveyors must thoroughly inspect the Tank Containers and raised estimates after the cleaning completed.
• Surveyors must report to the supervisor on all documentation of ISO Tank containers before sending to customers
• Surveyors will conduct Pre/Post inspection, if require by Customers. (Before Repair and After Repaired)
• As a surveyors must obtain instruction from the Supervisor.
• Surveyors must inform the Side Lifter Drivers to shift the Tank Containers into the
• workshop area for repair when Customers given the approval to repair.
• Surveyors must hand over the approved estimates to the Repairer Supervisor afterthe tank containers shifted into the repair bay.
• Surveyors ensure the repairer repair items accordingly indicated on the estimates and repair standard complies to ITCO/ACC or Owner criteria.

Job Description & Requirements

1. Liaise with the Sales Dept , Finance Dept , Warehouse and Shipping Executive on purchase , L/C opening , arrival of consignment etc

2. Check on order status and stock and catalogue availability through computer for order raised by the sales personnel

3. Check and verify the Sales Contract from supplier’s against P.O.

4. Check and verify the D.O. and Invoice received against P.O. and Goods Receipt Note

5. Update order control register and GRN into computer when the goods are received

6. Maintain new items, location changes , inventory adjustment into computer

7. Raise claim forms for short supply or damage goods to suppliers and follow up on the matters , whenever necessary

8. Follow up on outstanding orders and delivery schedules of orders

9. Prepare and type documents , A&P support etc. required within the Dept

10. Handle daily correspondence independently pertaining to the administration of the purchasing function

11. Attend to customer’s inquiries in the office

12. Ensure proper documentation procedures are adhered to by the Dept and recommend improvement , if any

13. Monitor and maintain proper filing system for easy retrieval of information

14. Collect all Tender Notice related to Power & Services products and inform Manager and /or person-in-charge

15. To follow up on the correspondence with the principal and customer

16. To prepare and assist in delivery order , invoice and confirmation of order upon receiving sales order

17. Prepare reports for Dept reporting and decision making purpose

18. Provide administrative support to the Dept

Requirement:

• Min GCE “O” Level or equivalent
• Min 2 years’ experience in similar capacity

· Good computer skills especially in MS Office Software

· Experience with SAP is highly preferred

· Possess good interpersonal & communication skills

· Meticulous and attentive to details

Are you a creative talent passionate about design, storytelling, and green living? Join World Farm, Singapore’s leading wholesale and retail garden centre, as we embark on an exciting journey to inspire sustainability and transform homes with the beauty of plants.

As our Marketing Designer and Content Creator, you’ll combine your creativity and expertise to craft compelling visuals and engaging content that resonates with budding gardeners, proud homeowners, and plant enthusiasts alike.

About World Farm

At World Farm, we are more than a garden centre. We are a one-stop destination for all things plants and gardening, committed to promoting sustainability and green living—one plant at a time. As we expand further into the retail space, we aim to make gardening accessible and exciting for everyone, from beginners to seasoned plant parents.

Your Responsibilities:

• Creative Design: Craft visually stunning designs for digital and print, including posters, banners, flyers, brochures, vouchers, gift cards, and POS displays.
• Content Creation: Develop engaging multimedia content, including photos, videos, animations, and social media posts tailored to platforms like Instagram, TikTok, and Xiao Hong Shu.
• Brand Storytelling: Collaborate with the team to conceptualise and execute campaigns that connect with our target audience.
• Photography & Videography: Capture product photos, videos, and lifestyle content that showcases the beauty of plants and garden spaces.
• Trendspotting: Stay updated on social media and marketing trends to ensure we’re always ahead of the curve.
• Campaign Coordination: Work closely with the team to align visuals with overarching marketing objectives.
• Asset Management: Organise and maintain a library of design assets for efficient and effective project execution.

What We’re Looking For:Marketing Designer and Content Creator

• Qualifications: Diploma or Degree in Graphic Design, Visual Arts, or related fields (or equivalent experience).
• Experience: At least 2 years of relevant experience in graphic design, content creation, or digital marketing.
• Technical Skills:

1. Proficiency in Adobe Creative Suite (Photoshop, Illustrator, InDesign).
2. Proficiency in videography and photography skills.
3. Video editing skills (Premiere Pro, After Effects, or CapCut) are a bonus.

• Creative Edge: Strong eye for typography, layout, and aesthetics, with knowledge of colour theory and current design trends.
• Social Media Savviness: Familiarity with TikTok, Instagram, XHS, and other platforms, plus knowledge of content strategies.
• Soft Skills: Team player with excellent communication and collaboration abilities, capable of prioritising tasks and taking ownership of projects.
• Adaptability: Thrive in a fast-paced environment and manage multiple projects effectively.
• Passion for Green Living: An interest in gardening, sustainability, or green spaces is a big plus!

Why Join Us?

• Work Perks: Non-traditional perks such as free use of our commercial pickleball courts, free car and motorcycle parking, dining and other discounts at affiliated businesses, and the chance to work in a lush garden setting.
• Flexible Work Arrangement: Enjoy a flexible work model that promotes work-life balance while offering you some structure.
• Pet Care Leave: Not a parent but a paw-rent? Enjoy pet-care leave to take care of your pets.
• Collaborative Culture: Be part of a supportive team that values innovation and creativity.
• Growth Opportunities: Contribute to a brand on the rise, shaping how we connect with new audiences.

How to Apply

Send your resume, portfolio, and a brief introduction about why you’re the perfect fit to [email protected]. Showcase your best work and let us see how you can help bring our brand to life!

Are you up for the challenging next step in your career? Stolthaven’s corporate Asset Management department is looking for a Lead Corporate Development Engineer.

Stolthaven’s corporate Asset Management department is responsible for developing various new business opportunities in close cooperation with our commercial functions, various experts and local management. These range from greenfield and M&A opportunities in our core business to opportunities in new fields of business or innovation such as energy transition related. The role of business development engineer is a key role in this. As a business development Engineer, you will be supporting with everything technical around business development. These are typically large (class III) projects with capex above 0.5 mln. You will be expected to have an inquisitive mindset and willing to work on various engineering disciplines. This role is not so much focused on what you know, but more on your ability to learn!

In this dynamic role, your responsibilities range from developing conceptual designs, masterplans and other project related documentation during the early stages of a project to evaluating new technology and learning all about new products to be stored or new process at our terminals. Within the local and global Asset Management teams, you will share knowledge & experience on your expertise and act as a true partner for the various stakeholders. You should be business oriented and willing to learn the “bigger picture”, focusing on how technical problems can be solved to support business goals.

As part of the global Asset Management team, you will work in close cooperation with the network of technical specialists and procurement for developing project cost estimates to proposed facilities in consideration of environmental and customer requirements.

SHVN Stolthaven Terminals a division of Stolt[1]Nielsen Limited (SNL), is the specialist storage provider of bulk liquids: Chemicals, clean petroleum, gases, vegetable oils, biofuels and oleochemicals. Our mission is to be the most respected global storage provider, delivering safe, high-quality, sustainable storage and handling solutions for our customers around the world.

Key Responsibilities

1. Provides comprehensive technical and management support on all technical projects assigned by the Asset Management Director. Typically, business development conceptual engineering and innovation projects. This includes, but is not limited to:

• Prepare project details, scope engineering documents and cost estimate to prepare for initial (board) approvals for new projects
• Assist in Preparing Requests for Quotation and other procurement documents in close cooperation with Stolthaven’s procurement team

2. General multi-disciplinary engineering works, such as:

• Support the preparation of technical proposals for improvements of technical installations
• Proactively identifies technical risks in projects and seeks for mitigation
• Providing assistance in the formation of annual capital budget forecasts
• Ensure all systems within the facility are designed, installed, and maintained in accordance to local, state and federal regulations and standards

3. Support or promote innovations, new products and methods by:

• Meeting with vendors to acquire knowledge to technical advancement, cost control and alternate solutions to typical terminal design and maintenance requirements
• Attending continuing education seminars and conferences to acquire knowledge pertinent to technological advances and regulatory changes
• Interacts with other initiatives for example in Risk Based Inspection meetings contributing to standardized way of working over terminals and within team by working on corporate projects assisting the global Asset Management team

4. Enforces established plant safety and environmental policy and procedures as related to assigned projects and related tasks

Qualifications

1. Bachelor/Master degree in Mechanical Engineering, EI&A, Civil or related field

2. Familiarity with applicable standards and codes relating to bulk liquid storage facilities for the applicable terminal location is preferred or should be obtained as part of training. This could include API, EEMUA, ANSI, NFPA, NEC, OSHA, and CFR and any other (local) codes

3. Exposure to Multi-disciplinary project teams with various business stakeholders is preferred

4. Self-motivated to ‘close the loop’ with actions and administrative responsibilities

5. Able to communicate with internal and external stakeholders in Portuguese and/or Chinese languages

6. Able to build and maintain both internal and external relations on various levels

7. Able to communicate effectively both verbally and in writing. Especially ability to explain complex technical topics to non-technical stakeholders

8. Proven safety leadership and service mindedness

9. Competences: self-motivated, flexible, stress resistant, result driven, team player, humour

10. Requires advanced conceptual thinking in complex and/or completely new situations and analytical skills

11. Must be computer literate with specific skills in MS Office

12. Knowledge of and experience with planning software (e.g. MS Projects, Oracle Primavera etc.) and Autodesk products (e.g. Autocad) is considered an advantage

13. Occasionally the ability and willingness to work weekends and/or holidays to accomplish critical project assignments

14. Depending on the required engineering discipline, willing to gain knowledge of the following:

• Mechanical: Standards and codes relating to bulk liquid storage facilities applicable to the location, such as API, ANSI, NFPA, NEC, OSHA, CFR, PGS
• EI&A: Standards and codes relating to bulk liquid storage facilities applicable to the location, such as ATEX, IEC, IEC61511, SIL applications, field instrumentation

15. Knowledge and experience with reviewing drawings just as P&ID, E&I drawing and Automation specifications. Knowledge and experience with ACAD and or E-plan drawings

16. Willing to working in Jurong Island (Company transport is provided at designated pickup point)

What we offer

Join us and become part of a family-founded organization where your contribution counts.

• A full-time and permanent role
• Working Hours: 5 days’ work week (Mon-Fri), 8.30am to 5.30pm
• A competitive compensation package, including a 13th month
• Good Flexible Medical Benefits for you and your family members
• Company Transport is provided as designated pick-up point

How to apply

• Complete the online application form and send it to us along with your CV
• Short-listed candidate, will be invited to attend interview at our terminal

Got questions about the process? Contact [email protected].

About Stolt-Nielsen

Stolt-Nielsen Limited is a long-term investor and manager of businesses, focused on opportunities in logistics, distribution, and aquaculture. The Stolt[1]Nielsen portfolio consists of its (three) global bulk-liquid and chemicals logistics businesses – Stolt Tankers, Stolthaven Terminals and Stolt Tank Containers – Stolt Sea Farm and investments in LNG. Stolt-Nielsen Limited is listed on the Oslo Stock Exchange (Oslo Børs: SNI).

Disclaimer for recruitment agencies

We don’t accept any unsolicited applications or CVs from recruitment and selection agencies.

Job Benefits:

5 days work week: 12:00 pm–3:00 pm, 6:00 pm–10:30 pm

Off - Monday & Tuesday

Basic up to $3600 + Staff Meals Provided + AWS + VB + $150 Extra Meal Allowance

$4000 Sign on BONUS

Central/South Area

Job Description:

• Effectively manage the kitchen operations to ensure correct standards and procedures are followed in the daily food preparation.
• Consistently monitor food quality and quantity to ensure profit margins are maintained and operating budgets are adhered through effective control systems.
• Responsible for overseeing the cleanliness, hygiene and maintenance of the kitchen and ensure compliance with all applicable food safety and regulations (e.g. HACCP, NEA regulations).
• Lead and ensure staff are cross trained to support successful daily operations.
• Exhibit Japanese culinary talent and expertise by performing tasks while leading and coaching the staff and managing all food related production.
• Work closely with the Head Chef to determine menu selections and specials and develop new menus recipes as necessary.
• Assume duties and responsibilities in the absence of the Head Chef.

Job Requirement:

• Diploma in Culinary with minimum 5 years of experience in Western cuisine.
• Proven experience as Sous Chef.
• Able to perform high-quality work while unsupervised.
• Ability to work in a fast-paced work environment and deliver orders in a timely manner.
• Must have relevant work experience in Western/ Japanese Cuisines (Teppanyaki).

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*
We wish you all the best in your career search.

You are welcome to visit our website at www.rkgroup.sg

RK Recruitment Pte Ltd | EA License No.: 20C0280

Raymond Ng Jun Han | EA Personnel No.: R1657009

Job Responsibilities

Supplier Management

• Drives alignment of supplier selection to global supply strategy and the approved supplier list
• Manages key supplier and outsource integration partner relationships, cost optimization, product transfers / launches
• Defines sourcing contracts / supply agreements and ensures appropriate contractual agreements are in place addressing flow down requirements, capacity, cost, and commercial requirements
• Works with suppliers on improving Scorecards and KPIs
• Ensures adequate capacity exists in the supply chain for components of assigned products, coordinates forecasts, ensures end of life requirements are flowed down
• Maintain DDMRP (Demand Driven MRP) programs such as Kanban and safety stock replenishment contracts inclusive of analyzing and updating quantities, maintaining proper ERP system set up, keeping applicable contractual liabilities and amendments current, mitigating Ichor’s liability, resolving delivery discrepancies, providing forecasts to suppliers and ensuring suppliers are performing to contractual service levels

Supply Chain Project Management

• Identifies or is assigned to lead continuous improvement opportunities across the global supply chain
• Drives process improvements and resolves complex supply chain issues (using methodology such as 8D report, etc.)
• Ensure NPI BOM items are purchased at lead time through, coordinating demand load with Business Units and Planning (MRP, Independent demand or Indirect Purchase Requisitions)
• Provides sourcing direction and coordinates RFQ packages with the support of Buyers and Global Supply Managers
• Coordinates PO tracking through Buyers
• ECO analysis, approval, and coordination of implementation to the supply chain for new products
• Establish plans for supply risks mitigation, eg. identify floor stocks, Safety stocks, VMI / Kanban , long lead time mitigation plans
• Benchmarks and drives cost reduction plans and actions with assigned suppliers
• Derives plans and methods for optimizing the costs associated with a products value chain

Job Requirements

• Bachelor degree in business or Engineering. MBA preferred
• Prefer a candidate that has experience across several operational disciplines such as Commodity Management or Procurement. Candidate will possess extensive experience in a minimum of two skills in the following areas: procurement, commodity management, strategic sourcing, supplier development, planning, program management, master scheduling and factory engineering.
• Minimum 5 years’ experience in supply chain, commodity management or NPI related function & 10 years operations experience preferred
• Strong understanding of contract manufacturing environment and management of global commodity strategies through a third party provider
• Proven record of managing and driving Continuous Process Improvement activities. Strong analytical skills, ability to identify root cause for action/resolution
• Strong interpersonal, written and verbal communication skills
• Strong leader, self-motivated, proactive, detail oriented, hands-on and results driven.
• Good knowledge of aspects of purchasing, supplier selection, cost analysis and negotiation, planning, master scheduling and program management
• Work independently in fast paced environment
• Contract management, negotiation and implementation experience
• Ability to concisely communicate escalations, requirements and issues to suppliers, stakeholders, peers and upper management with clarity
• Experience working in ERP & PLM systems; SAP and Team Center preferred,
• Intermediate: Word processing/typing, presentation/PowerPoint/Power BI

Job Description & Requirements

We are looking for an experienced Operation Manager /Supervisor to oversee and coordinate the daily warehousing activities. You will implement production, productivity, quality and customer service standards and achieve the appropriate level of volume within time limits.

What Will You Do

· To lead a team of warehouse assistants in warehousing and daily operations

· Ensure all incoming goods are received correctly and in good condition

· Conduct weekly and monthly stock take and prepare inventory reports

· Ensure store operations run smoothly and maintain housekeeping

Any other ad hoc duties assigned

Key responsibilities and qualifications as follows:

1. Engage in all architecture phases, from concept design through to completion, including contract administrator.
2. Work with other disciplines to produce fully coordinated project information, including BIM models, drawings, schedules, and specifications.
3. Deliver compelling and high-quality designs that reflect creative and innovative thinking, elevating the overall project vision.
4. Oversee large-scale projects, leveraging a minimum of 6 years of relevant experience. International project experience is a significant advantage.
5. Collaborate effectively, work independently as needed and flexes to support the delivery of ad hoc requirements.
6. Communicate effectively with internal and external stakeholders.
7. Manage third-party contributions and ensure integration with the overall design process.
8. Use Adobe Suite, Rhino, Enscape, Revit proficiently.
9. Experience with Grasshopper or parametric design, hand sketching, and AI software is a plus.
10. Demonstrate strong graphic skills with Photoshop, Illustrator, and InDesign.
11. Supports team members in delivering high-quality work on time and provides mentoring to junior colleagues to foster their growth and development.

Requirements:

• Master's degree in architecture or equivalent
• At least 5 years of working experience in the related field
• Proficient in BIM (Revit), Sketchup, Adobe Photoshop
• Proficient in Microsoft Office applications
• Possess good interpersonal skills and a team player
• A hands-on person who is positive, proactive and driven
• Meticulous and able to organize work effectively
• Fresh graduates are encouraged to apply

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum 10 years QA/QC experiences

· LTA Mrt experiences will be an advantages

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Responsibilities:

Project-based Architectural Design Consultancy Services:

• Conceptualize concept and schematic designs.
• Carry out feasibility studies and presents design proposals.
• Design development that would include detailed drawings and specifications for contractors to follow for construction purposes.
• Assist in tendering and bidding processes and inspect the on-going construction to ensure that the project is built according to design plans.
• Liaise with and discuss project-relevant issues with clients.
• Negotiate with contractors on design requirements and building progress.
• Oversee progress of on-site work; ensure project is built according to design plans and resolve any issues that may arise.
• Work with engineers and surveyors to make sure that the building plans meet the necessary building standards.
• Project and/or design management of more than 3 - 4 projects at any given time.

Research-related Work:

• Assist in carrying out practice-based research into specific issues and challenges surrounding the built environment, with the aim of gaining greater insight into these issues and developing design strategies and solutions in response to them.
• Work with Director (Design and Research) to enhance public/industry awareness of the firm’s design philosophies, capabilities, and accomplishments (directly and indirectly) through design, writing, teaching, and research work.

Requirements:

• Minimum Bachelor Degree in Architecture or equivalent
• At least 5 years of working experience in the related field
• Able to work well with a team and take the lead at the working level
• Able to guide younger staff in design matters
• Possess good design and graphic communication skills, especially in the concept design, schematic design and design development stages.
• Positive attitude
• Some experience with tender documentation and construction stages
• Software skills: Rhino, Grasshopper, Adobe Photoshop, Illustrator and Indesign. Revit and computational skills will be a plus.
• Willing to take on new challenges

Responsibilities:

• Lead a project team and provide technical leadership on architectural design matters.
• Provide guidance to team members to ensure that design solutions are optimised in order to meet clients' requirements.
• Be involved in business development meetings to target specific markets, clients and project opportunities.
• Carry out architectural designs.
• Carry out feasibility studies and make design proposal presentations.
• Liaise with and discuss project-relevant issues with clients.
• Negotiate with contractors on design requirements and building progress.
• Oversee progress of on-site work; ensure project is built according to design plans and resolve any issues that may arise.
• Work with engineers and surveyors to make sure that the project meets the necessary standards.
• Project and/or design management of more than 3 - 4 projects at any given time.
• Take on the role of PD (Project Director) or PL (Project Lead) and be in charge of or assist in project P&L and resource planning.

Requirements:

• Minimum Bachelor's Degree in Architecture or equivalent
• At least 4-6 years of working experience in the related field
• Proficient in BIM (Revit), Sketchup, Adobe Photoshop
• Proficient in Microsoft Office applications
• Possess good interpersonal skills and a team player
• A hands-on person who is positive, proactive and driven
• Meticulous and able to organise work effectively

The Division of Information Technology and Operations Management at Nanyang Business School is inviting applications for a Research Assistant (RA) position. The role is expected to begin in March 2025 or thereafter. The position will run until 31 July 2025.

Key Responsibilities:

• The RA is expected to plan, organize and implement research projects, in collaboration with the principal investigators. The successful candidate will work closely with professionals in the field of AI, technology and medicine.
• Conduct literature reviews, coordinate schedules for data collection with survey and interview participants
• Assist in data collection, data transcription and analysis
• Contribute to the dissemination of research findings

Job Requirements:

• Minimally a Bachelor’s degree in Business
• Excellent oral and written communication skills is required as the research work is conducted in English language
• Able to work independently and meet deadlines
• Experience with qualitative methods and data analysis

We regret to inform that only shortlisted candidates will be notified.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

1) Performs administrative and clerical tasks

2) Ensuring internal Records are accurate

3) Checking of documents from customers to ensure compliance

4) Assists with initial client operational requirements relating to vehicle recovery / towing

5) Assists with internal reporting generation and submission to relevant stakeholders

6) Any other duties as assigned by management

7) Training will be provided

Fresh graduates are welcome to apply

CEVA Logistics, a world leader in third-party logistics, provides global supply chain solutions to connect people, products and providers all around the world. Headquartered in Marseille, France, CEVA Logistics offers a broad range of end-to-end, customized solutions in contract logistics and air, ocean, ground and finished vehicle transport in 170 countries worldwide thanks to its approximately 110,000 employees at approximately 1,500 facilities. With a pro forma 2023 revenue of US$20.2 billion, CEVA Logistics is part of the CMA CGM Group, a global player in sea, land, air and logistics solutions.​

About the role:

The incumbent will be part of the Sustainability Team and will support the Sustainability Manager in implementing sustainability/reducing environmental impact across the company’s operations.

What you will be doing:

• Sustainability projects implementation and Continuous Improvement, with a strong focus on developing our Scope 3 Downstream Reduction Projects:

o Main topics revolve around Green trucking solutions and Sustainable Packaging

o In direct contact with the Operations Team, Analysts, Procurement, Vendors, and Customers

o Calculation and presentation of environmental and cost impact

o Co-create and track project roadmaps

o On a constant look out for innovative solutions and sustainable alternatives

o Research on sustainability topics to build up knowledge database

• Support the tracking, consolidation and analysis of sustainability Key Performance Indicators on a monthly basis
• Maintain visualization dashboard of these KPIs
• Support some of our Building Efficiency Projects implementation in partnership with our Senior Sustainability Officer (Energy) and Facility Teams.

The successful candidate

• Bachelor’s Degree or above in CSR, Environment, Sustainability or Business Management.
• Some professional experience with a deep interest in, and a general awareness of, sustainability issues. Good understanding of sustainability stakes applied to the logistics industry is preferred.
• Passion, knowledge and drive to create a more sustainable world
• Excellent knowledge of Microsoft Office, including Excel, PowerPoint and Word. Tableau is a plus
• Fluency in English, both written and spoken.
• Excellent organisational skills, ability to own projects and work independently
• Ability to multitask is necessary
• Solid written and verbal communication skills, familiarity with business writing
• Knowledge of Project Management tools and techniques
• Familiarity with carbon calculation with tools such as GHG protocol is a plus

CEVA Logistics is a vast global business of 110,000 employees, representing every race, gender, marital status, sexual orientation, disability, age, religion or belief, nationality and ethnicity.​

We recognize that people from different backgrounds and with different experiences and skills contribute new knowledge and perspectives that improve our service offerings and business practices and strengthen relationships with our diverse customers.​

We work to provide a positive environment in which every employee feels valued and respected and is supported in reaching their full potential. We walk the talk.

Responsibilities:

• Towing of construction vehicle/ equipements

Requirements:

• Possessed Class 4 or 5 driving license
• Preferably with experience in towing service
• Applicants without experience will be consider, training will be provided
• Require to work upto 6 days a week
• Work shift hours (Day/ Night shift)

JOB SUMMARY

You will be responsible for marketing design initiatives and campaigns.

RESPONSIBILITIES & EXPECTATIONS

• Conceptualise and design creative, intuitive and brand-consistent visual assets for both digital and print collaterals such as brochures, print-ads, graphic content for website, social media, email (EDM) communications and other digital platforms
• Liaise with print vendors and external resources to ensure optimal results in marketing collaterals production
• Work closely with brand owners and chefs on photoshoot, menu/packaging design and marketing display props
• Ensure a consistent design language is applied whilst maintaining consistency in visual elements and defining behaviour
• Work closely together with the graphic designers & brand owners to design a unique digital identity for our brands

REQUIREMENTS

• Diploma or degree in Graphic Design / Visual Communication, or related disciplines
• Minimum 2 years of experience in similar capacity
• Proficient in Design, Photography, Photo and Video editing software (i.e. Illustrator, InDesign, Adobe Premiere Pro, Final Cut Pro)
• Good working knowledge in print design and production
• Good understanding of design principles and typography, with attention to details.
• Ability to conceptualize and execute work task under pressure with a strong desire to succeed
• Photography styling experience & videography knowledge will be high regarded
• Possess a positive attitude, with a passionate and creative mind
• An effective team player with good interpersonal & communication skills
• Experience in digital strategy related to problem-solving charge, helping to connect the dots between the needs, wants, and desires of the customer and the business, brand, and marketing goals would be an added advantage

Job Description

We are looking for a passionate Assistant Marketing Manager to be part of the Marketing team. You will be responsible for marketing design initiatives and campaigns for retails brands.

Job Highlights

• Opportunities for Creative Innovation
• Career Development Opportunities

RESPONSIBILITIES & EXPECTATIONS

• Responsible for the brand development work of the catering brands.
• Develop marketing strategies and plans, advertising, promotions, creative projects, media relations, sponsorships and event management.
• Develop revenue and profit growth strategies for the business and take charge of the tactical execution of the brands’ marketing communication initiatives in support of the business strategy, market goals, and organizational objectives.
• Leads, coordinates campaigns and communications through all phases of launch and maintenance, including reporting, analysis and optimization.
• Collaborate with internal business partners like Operations, F&B and Finance teams to ensure that all initiatives support the brand promise.
• Develop creative briefs and guide creative direction to meet objectives for all advertising and communications, including print, and digital assets
• Monitor and improve ROI using strategic and analytical approach
• This role requires a strategic and analytical approach to monitoring and improving ROI.
• Prepare and manage budgets for various marketing and branding initiatives to achieve cost efficiencies.
• This is an ideal role for an experienced, organized and detail-oriented marcom professional with a strong background in FMCG/retail environment.
• Any other tasks as and when assigned by immediate superiors

REQUIREMENTS

• Degree / Diploma in Mass Communication / Marketing or related discipline
• Minimum 5 years’ relevant brand management and marketing experience, preferably in the F&B/ FMCG industry
• Meticulous with an eye for detail
• Willing to roll up sleeves and work on the ground to ensure the success of all projects delivery
• Highly creative with experience in creating content and digital campaigns that engage, inform and motivate
• Proactive with a strong sense of accountability and a day-to-day focus on results.

We are a logistics courier delivery company based in Toh Guan Road, Jurong. We are looking to hire a full-time Truck attendant.

Job Responsibilities:

• Assist driver to collect/deliver a variety of items (various weight & size

ready to ship)

• Able to load items into van/truck independently

• Collection of goods from different customer warehouses for delivery

• Loading and unloading of goods using pallet jacks to/from van/truck

to warehouse

• Any other ad-hoc duties as assigned by managers or supervisors

• Not necessary to have Class 3/4 license.

Job Requirements:

• Must be willing to work OT

• Excellent team player

• Follow up closely on delivery schedule

• Able to start work immediately or within a short notice will be added

an advantage

Remuneration Package:

• Basic Salary - $1600 (Probation) to $1800 (confirmation)

• Performance Incentive (Variable Allowance): $300 monthly for good attendance and

depends on performance appraisal! (No lateness or absence)

• Tenure allowance - Eligible employees will receive tenure allowance

upon reaching their 1st, 2nd and 3rd year of service. It will be a daily

paid allowance on top of current basic salary.

• Overtime payable

• $10 meal allowance for overtime exceeding 2hrs

• 12 days annual leave, 14 days medical, 46 days hospitalisation, Child Care leave, Paternity Leave, Marriage Leave!

Working hours: (5.5 days work week)

• Mon-Fri: 10am - 7pm

• Sat: 10am to 2pm

• Must be able to work OT.

Interested applicants are invited to send your updated resume (please indicate reasons for leaving each previous job) in via Apply Now.

Responsibilities:

1. Team Leadership

• Lead, supervise, and mentor a team of air conditioning repair and maintenance technicians.
• Provide ongoing training and development opportunities for the team. Foster a positive and collaborative work environment.

2. Service Coordination

• Develop and implement efficient repair and maintenance schedules.
• Coordinate service calls, prioritize tasks, and allocate resources effectively.
• Ensure prompt response to emergency repair requests.

3. Technical Expertise

• Stay updated on industry trends, new technologies, and advancements in air conditioning systems.
• Identify opportunities for process improvement and implement best practices.
• Provide technical guidance and support to technicians in troubleshooting and resolving complex issues.

4. Customer Satisfaction:

• Establish and maintain strong relationships with clients.
• Address customer inquiries, concerns, and ensure high levels of satisfaction.

5. Budget Management:

• Develop and manage the departmental budget, ensuring cost-effective operations.
• Monitor expenses, analyse budget variances, and implement cost-saving measures.

6. Compliance and Safety:

• Ensure compliance with industry regulations, safety standards, and company policies.
• Implement and enforce safety protocols to ensure the well-being of employees and customers.

7. Inventory Management:

• Manage and control the inventory of spare parts and equipment.
• Coordinate with suppliers to ensure the availability of required materials for repairs.
• Generate regular reports on repair and maintenance activities, including key performance indicators (KPIs).

8. Reporting:

• Provide updates to senior management on departmental performance and challenges.

Requirements:

• Possess a Singapore Class 3 license will be an added advantage.
• Minimum diploma in Electrical, Mechanical or Electronic field.
• At least 3 years of working experience in the related field; with maintenance experience in HVAC, refrigeration & M&E systems.
• Positive attitude, good interpersonal & customer-centric skills.
• Experience in air-conditioning repair & maintenance.
• Strong knowledge/experience in HVAC or ACMV systems for residential or commercial sectors.
• Ability to work independently and collaboratively in a team.
• No experience is also welcome to join as apprentice.

Working Location:

Sungei Kadut

• Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

Note:

• Only shortlisted candidates will be notified.

Responsibilities

• Lead the Mechanical Department and make sure everything runs smoothly and on time.
• Handle mechanical repairs and updates for commercial ships.
• Ensure production meets customer standards and expectations.
• Assign projects to supervisors.
• Make sure mechanical jobs are finished on schedule.
• Review and evaluate staff performance.
• Check progress of work on board or in the workshop.
• Plan department staffing needs.
• Identify and arrange training for staff.
• Oversee staff training and skill improvement in ship repair.
• Improve work quality in the department.
• Monitor and review safety and hazard reports.
• Implement safety plans for the department.
• Conduct safety audits for departmental practices and staff.
• Keep track of subcontractor working hours.

Requirements

• The ideal candidates should possess strong knowledge and experience in areas such as propulsion, shaft alignment, thrusters, and CPP. A degree or diploma in Mechanical Engineering is required, along with 4 to 8 years of experience in the shipyard or marine industry.

Benefits

• Free parking
• Professional development
• Car allowance

Working Hours

• Monday to Saturday
• 0800 to 1700hr (Mon – Fri)
• 0800 to 1200hr (Sat)

• Attend site visits and tender show round
• Propose and design simple yet sustainable landscape designs for specified sites
• Prepare quotes and landscape maintenance reports
• Coordinate work orders with ground crew
• Dealing with complaints from client on site
• Prepare maintenance schedule
• Monitor and recording of site staff attendance
• Handling few projects assigned and coordination
• To be responsible for the administrative and operational for landscape project aspects, including liaise with customers for project requirements and progress

Requirements

• Degree/Diploma in Horticulture, Arboriculture or other related fields with minimum of 1 yr experience in landscaping industries
• Required language(s): English, Chinese (in order to deal with complaints from Chinese speaking client on site)
• Dynamic and energetic
• Good team player with ability to lead and multi-task
• Committed to work
• Required Skill(s): Microsoft Office
• Excellent interpersonal and communication skills
• Prefer candidates with horticulture or arborist knowledge
• On-the-job training provided
• Entry level candidates with the revelant Polytechnic / WSQ Diploma / Degree are welcomed

Working Hours and Office Location:

• 5.5-day work week
• Office location: Mandai Estate
• Work location: Various Sites

Job Overview

The Senior Contracts Officer will manage, negotiate, and administer contracts to ensure compliance with company policies, client requirements, and industry standards within the FPSO sector. This role is critical for supporting project execution, mitigating risks, and ensuring that all contractual obligations are met efficiently.

Key Responsibilities

• Contract Drafting and Administration:Prepare, review, and revise contracts, ensuring alignment with company standards and legal requirements.
  Maintain a comprehensive database of contracts and monitor their lifecycle.
  
• Negotiation:Support the negotiation of contract terms with clients, vendors, and subcontractors to achieve favorable terms.
  Resolve contractual disputes promptly and amicably.
  
• Compliance and Risk Management:Ensure adherence to legal, regulatory, and contractual obligations specific to FPSO operations.
  Identify and mitigate risks in contracts to safeguard company interests.
  
• Coordination and Communication:Collaborate with internal teams, including legal, procurement, and project management, to align on contractual terms.
  Serve as a liaison between the company and external stakeholders regarding contractual matters.
  
• Reporting and Documentation:Prepare detailed reports on contract performance, risks, and compliance.
  Maintain accurate records of contractual documents for audits and future reference.
  

Qualifications and Experience

• Education:Bachelor’s degree in Law, Business Administration, or a related field.
  
• Experience:Minimum of 10 years of experience in contract management, preferably in the oil and gas or FPSO industry.
  Strong understanding of commercial terms, legal frameworks, and industry-specific requirements.
  
• Skills:Proficiency in contract management software and tools.
  Excellent negotiation, analytical, and communication skills.
  Detail-oriented with a strong ability to handle multiple tasks under tight deadlines.
  

Preferred Qualifications

• Knowledge of FPSO design, construction, and operational contracts.
• Familiarity with international maritime and oil and gas regulations.
• Certification in contract management (e.g., IACCM, NCMA) is an advantage.

Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today!

Job Summary:

The Materials Program Manager will work with various functions and departments to drive material flow and ensure visibility of current & future material issues. It will be the core member to supporting materials strategy.

Essential Duties and Responsibilities:

• A People Manager who will manage a team of Materials Program Manager/Materials Expeditor
• Overseeing the material requirement and supply chain activities for specific programs
• Align material strategies with business strategies and program objectives
• Liase with site planning and supply chain management functions including GSS buyers, Commodity and Project Managers
• Identify and mitigate risks associated with material supply
• Conduct risk assessment & implement effective risk mitigation strategies
• Escalation points of contact for material issues within the program
• Communicate effectively with internal and external stakeholders
• Work with Planner to ensure visibility of current & future material issues
• Work with Production Managers to understand Critical Production schedules
• Coordinates demand signals through MRP to minimize inventory exposure.
• Participates in Materials Core Team and coordinates product development process deliverables with team members (buyers, planners, production control).
• Supports the creation, releases, and updates to new project materials strategy.
• Works with engineering to identify preliminary critical parts, long-lead parts and inspection requirements. Assists in developing supplier and commodity road maps to engineering.
• Material risk BOM analysis at project level :
  • Design the inventory programs: VMI, JIT, discrete orders, etc. – driving lead-time reduction
  • Recommend risk buy or consignment

(This relates to impact inventory liability, inventory turns, cash flow relief, etc. – due to upsides, downside, slow down of businesses more effectively)

• Burst demand request by customers – assess entire BOM materials lead-times, chronic suppliers, customer managed allocations , etc., then present from materials perspective how to support burst demand plan to support operations
• Work closely with Supply Chain Program managers for localization or regionalization of OEM & BTP parts
• Work with SCM on long term supply chain mitigation plan via localization or alternate sourcing to ease the supply chain for the Program/Tool.
• Leads project team that may include different functions and departments to solve supplier long-term issues and improve supplier performance. Provides inputs to engineering and SCM in supplier selection and assessment.
• Analyze system need dates, supplier commitments and current production status to identify critical material issues
• Escalate critical material shortages immediately upon identification and own the efforts to resolve and continue to escalate
• Lead clear to build (CTB) for pre-production build phases
• Propose optimized supply planning to ensure on-time build schedule. Drive closure of materials issues
• Collaborate with supply chain functions for support as needed
• Participates in commercialization (transition) materials plan. Participates in the material change control change process. Assists in supplier price and delivery negotiations; Complete supplier risk assessment on critical and unique parts. Monitor supplier performance (delivery, quality, cost).
• Develop and execute risk/opportunity plans to meet program objectives & proactively manage mitigation plans
• Track KPI’s and generate Reports, Metrics & Presentations
• Attend quarterly SBR with customer and supplier
• Support planning & coordination of new Projects, New components and Engineering Changes and assess the impact to Production Schedules
• Consistently work on Demand & Supply to proactively identify gaps and work with planner buyers and Strategic procurement to eliminate the gaps
• Work with Engineering & Program Management to develop roadmaps for the phase-out of obsolete parts and phase-in of new product materials
• This position will support customers to act as the crucial link between customer and Materials Supply Chain.

Knowledge, Skills and Abilities:

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities
• Strategic thinking and communication skills.
• Collaboration and influencing skills demonstrated.
• Sense of urgency.
• Situational leadership.
• Leadership development, and coaching skills.

Educational/Certification Requirement:

• Degree in Engineering, Supply Chain or Business

Experience Requirement:

Work Experience:

• At least 5 years of relevant experience in manufacturing industry
• Strong purchasing experience in commodity management and customer facing experience,
• Flexible to support work with US counterparts. Will have frequent communications with cross-functional teams in the US and Asia.
• Experience in the position of Materials Program Manager (MPM) and/or Procurement.
• Experience with product design engineering and commodity management or priorities for raw material or component selection.
• Experience integrating the delivery schedule of materials into product program milestones.
• Working knowledge of Materials Requirements Planning (preferred SAP) and Bill of Material Structure tools (preferred Agile)
• Experience with Excel, Word, and PowerPoint.