Job Descriptions:

• Management of CAPA from tracking, including follow-ups and closure.
• Management of Change Control, Deviations, from tracking, follow-ups and closure.
• Review quality process control plan, drive quality issues to root cause, corrective actions and improvements.
• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Coordinate and assists during customer visits and audits.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Review the implementation and efficiency of quality and inspection systems.
• Collect, compile statistical quality data, and analyze data to identify areas for improvement in the quality system.
• Review of analytical reports, and batch records (manufacturing and packaging).
• Perform SAP QM setting, review test results, block / unblock of finished products.
• Manage customer queries, customer satisfaction surveys, and questionnaires and other quality / regulatory purpose documentation requests.
• Investigate customer complaints and non-conformance issues.
• Consolidate data to create the annual product quality review report.
• Track quality performance and initiate quality improvement plans.
• Perform risk assessments and monitor risk management activities at quality level.
• Conduct /perform training to employees to improve GMP / international standards certification awareness and compliance.
• Perform any other duties and responsibilities as assigned from time to time.

Job Requirements:

• Minimum 3 years related work experience
• Possess experience in internal audit, validation activities, training management and batch release for API with good background on cGMP

Responsibilities

• · Leading Process Design Team for Oil & Gas Projects and guide a team of about 10 Process Design Engineers / Designers to finish the Process design (start from Basic design to Detail Design) of the project.
• · Leading a Team of Process Engineers & Designers in Preparation & Review of PFD, P&IDs, MSD, PSD, Hydraulic calculations, Equipment sizing calculations, BOG calculations, Heat Loss calculations, Tank Venting calculations, Tank capacity calculations, Heating coil calculations, PSV calculations, Process data sheets for Equipment’s such as pumps, compressors, Refrigeration unit, Tanks, Process data sheets for Instruments such as control valves, PSV, PT, TT, LT, Flow meter, Process line list, Heat & Material Balance, HAZOP & SIL Study, Operation Manual, Process control Narrative, Cause & Effect Diagram, Surge Analysis.
• · Review & Checking of Process Documents such as PFD, MSD, P&IDs, Hydraulic Calculations, Process Data Sheets, Surge Analysis, Design Calculations etc to ensure that all the Process documents comply to applicable Codes & Standards and Project Requirements
• · Review & Checking of Surge Analysis report using Pipenet Transient Module for product loading/unloading operation, fire water network systems etc.
• · Review & checking of various process philosophies like Process Control Philosophy, Operation Philosophy, Cause and Effect diagram, Flare and blowdown philosophy, isolation philosophy, Vent & Drain philosophy, shutdown philosophy.
• · Participation in Design Review, HAZOP Study, SIL Study, HAZID Study, ALARP, Bow Tie, MAHM, RAM Study, Alarm Rationalization workshop, SIMOPS, Constructability review carried out during various stages of project.
• · Review Hazop Report, SIL Assessment & Verification Report & Responsible for Closure of all Hazop & SIL Study Recommendation
• · Preparation & Implementation of checklist for all Process Documents
• · Management of Process Discipline Engineers Team for development of Process Design of Major Projects from feasibility studies through Conceptual Design to Detail Engineering.
• · Pre-Bid, FEED & Detailed Design documents review.
• · Maintain Design integrity and quality within the Process Engineering Team.
• · In-house Engineering Activities and Process Engineering Man Hours Estimation and Schedule.
• · Preparation, Monitoring and Control of Process Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Responsible for Process Engineering Execution Methods and Procedure, Process Engineering Disciplines Co-ordination, Process Engineering Deliverables delivery for Project Execution, Process Man-hours Monitoring, Attending design review Meetings with Clients and Package vendors, PSSR+HAZOP+SIL study.
• · Inter Discipline Review of other Discipline Documents including vendor documents, GA drawings, Instrument data sheets etc for consistency, quality and Design Integrity.
• · Review of Authority submission documents like Fire Fighting Calculations (Fire & Foam network hydraulic and Surge Analysis, Fire Fighting Design Philosophy).
• · Development & Review of automated excel spreadsheets for process calculations.
• · Preparation, Monitoring and Control of Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Review and ensure that all Process works are carried out in accordance with project specification. Maintain Design integrity and quality within the Process Engineering Team.
• · Preparing Process Engineering schedule and Process Engineering Man hours estimation to meet project requirements.
• · Co-ordinate with other Discipline for Process Inputs and ensure seamless Inter Discipline co-ordination between Process and other Discipline.
• · Job assignments, Mentoring and Supervision of works for Process Designers and Design Engineers.
• · Technical assistance to construction activities and attending to Site Queries.
• · Reviewing Vendor Drawings for Equipment’s and Instruments in terms of Process.
• · FEED & Pre-Bid works which involves Feasibility study.
• · Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness, and correctness in works.
• · Implement HSE objectives, policy, and company HSE procedures within his authority limit.
• · To integrate Risk-based thinking and HSE considerations into business decisions, plans and operations with the commitment to eliminate and reduce HSE hazards, aspects and risks.
• · To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• · To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects, and risks.

Requirements

• · Preferably Bachelor’s Degree in Chemical Engineering
• · Preferably to 15 years in Oil & Gas industry

Software Requirements

• · Proficient in Pipenet, Hysis, MS Excel, MS Word

Code Knowledge

• · API 2000, API 520, API 521, API 526, API 2350
• · SS 532
• · NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

ENGINEERING ASSISTANT JOB DESCRIPTION

• Co-ordinate with Engineering staffs on the daily job activities.
• Perform Mitsubishi Heavy Industry software update and log data.
• Refrigeration box drawing for production and LTA inspection.
• Coordinate with both internal departments and vendors.
• General admin works.

Key Responsibilities:

• Data Entry & Conversion: Assist in ERP administrative conversion and data entry. Turn on Work Orders, PR/PO preparation, Job fulfilment, Process entry etc.
• Support Coordinators Task : Prepare drawing and prepare work process sheets. Help prepare shipment, include packing of goods.
• Administrative & Record Maintenance: Perform tasks such as scanning, filing, and prepare DO, while maintaining and updating jobs records to ensure consistency between physical and digital files.

Responsibilities

· Carry out Electrical, Instrumentation, Control and Automation (EICA) design for water and wastewater treatment projects.

· Manage the procurement, costing and delivery of electrical software and hardware required

· Make automation programming according to clients’ technical specifications

· Arrange control panel assembly, testing, and installation at construction site

· Modification and Integration of new equipment / system with existing automation system

· Update of SCADA/HMI graphic to reflect new instruments/equipment and mapping these graphics to the corresponding field signals

· Attend to EICA breakdowns with diagnosis and solutions

· Attend meetings with subcontractors and clients for technical clarifications and arrangements.

· Coordinate with Project Managers to ensure deliverables are within the schedule.

· Keep records of EICA design, drawings, and document systematically

· Provide support and assistance to Sales Department and Maintenance Team

· Guide and educate junior EICA personnel.

· Other ad-hoc assignments.

Requirements

· Bachelor's Degree in Engineering (Computer/Telecommunication), Engineering (Electrical/Electronic) or equivalent.

· Minimum 3 years working experience at membrane base water treatment plant, preferably

· Proficient with Schneider / Siemens / Allen-bradley software

· Well-versed with SCADA and HMI

· Excellent communication skill

· Good personality and team spirit

Responsibilities:-

1. Costing & estimation of switchboards, etc.

2. Assist in preparation of quotations, technical data, compiling brochures, catalogues & technical details, layout dimensional drawings, etc... required for submission to clients.

3. Assist Sales Team in following-up for orders.

4. Develop & implement use of computer for costing, estimation & quotations. Set-up and improve on standardised costing method.

5. Check & compare costing / estimation against actual costs for awarded job. Budget planning & control for jobs.

6. Responsible for correct / accuracy of acceptable level in costing.

7. Sourcing of components / parts with assistance from Purchasing Department. for better alternatives, improvements, cost effective, etc. when required.

8. Assist in co-ordination work (internal or external).

9. Take on added tasks / responsibilities as assigned by the superiors

10. Follow the procedures of the Quality Management System for effective implementation and control.

Perform diagnostic analysis of the network system, identify possible faulty devices, troubleshoot faulty modules, troubleshoot network problems and outages and prepare necessary documentation detailing actions taken.

-Monitor system performance and track usage and develop and deliver a trend analysis of system load, usage and response.

-Monitor the reachability of all connections within the network adhering to circuit restoral priorities and initiate troubleshooting to restore full network capability.

-Analyze system functions and failures to isolate and define problem area

Responsibilities:

• Make orders for construction materials and other items as requested.
• Ensure timely delivery of orders.
• Ensure all delivery orders are in accordance to PO and verification of DO for preparation of payment.
• Call for quotations and source for new supplies if need and recommendation of award.
• Work closely with site team for material purchases.
• Process and generate PO/RO
• All other tasks assigned
  
  Requirements:
• GCE O/A Levels or Diploma qualifications.
• Prior experience in working in construction industry is preferred.
• At least 3 years of relevant working experience.
• Proficient in Microsoft Office.

Duties and responsibilities:

· Ensure that all transactions are well documented

· Responsible for the full spectrum of Accounts Receivable.

· Ensure accurate and timely processing of Goods Return Note.

· Coordinate local cheque bank-in and daily update of incoming funds to the NAV system. To ensure timely updating of customer accounts.

· Monitor and follow-up with customers on overdue account and arrange for debts collection.

· Reconcile Customer Collection with Bank Ledger.

· Responsible on monitoring monthly /weekly Debtors aging.

· Mailing of Statement of Accounts to customers and respond to their inquiries.

· Prepare Accounts Receivable monthly cash flow forecast.

· Preparation of Journal entries for accruals & other adjustment.

· Preparation of monthly and year-end Balance Sheet schedules.

· Liaising with internal and external auditors.

· Looking into strengthening current and process improvement

· Undertake ad hoc duties as assigned.

Requirement:

· Diploma/Degree in Accounting

· At least 3 years of experience in accounting & finance.

· Mathematical and analytical ability

· Proven ability to work cross-functionally

· Work independently with minimal guidance required, i.e., good time management, planning/organization and decision-making skills.

· With a high degree of accuracy and efficiency

· Proficiency in Excel and other Microsoft office applications

· A team player who possesses good communication skills.

Working conditions

· 5-day work week

· Location: Woodlands/Senoko

· Industry: Manufacturing

*This is a permanent position*

We, Scents & Blends are a manufacturing firm specialising in the liquid Flavour & Fragrance industries.

What is the Flavour & Fragrance (F&F) Industry?

The Flavors & Fragrances Market are compounds used to enhance the characteristics of end-use products in the food & beverage, pharmaceutical, consumer products, and cosmetic industries.

• Flavours are used in a wide range of products that include bakery, snacks, confectionery, meat, poultry, seafood, and others.
• Fragrances - The perfume industry revolves around the production of scents and essential oils whose major use is to enhance pleasant smells and fragrances. With the kind of attention it pays to hygiene, the perfume industry is an indispensable part of the cosmetic and personal care industry.

This role shall be based in Singapore and report to the company's General Manager (GM).

• He/She will lead the sales/marketing division in Singapore.
• Coordinate with sales/marketing teams from different countries in the Asia Pacific region such as Vietnam, Thailand, Malaysia, India and Indonesia for servicing local clients and monthly sales report submission etc.
• Provide customer service / maintain existing key customer accounts.
• Create new client accounts from different countries, especially new market regions.
• Increase sales volume specifically in the Asia Pacific region.

Requirements:

• Possess at least 5 years of experience in sales of FLAVOUR and FRAGRANCE and/or FOOD PRODUCTS.
• Minimum Diploma/Degree qualification in Business Administration/Business Management & Marketing.

Location: Singapore (Woodlands)

Job Overview:
We are seeking a diligent and safety-conscious Production Operator to join our beverage manufacturing team. In this role, you will be responsible for operating and maintaining production machinery, ensuring smooth and efficient production processes, and adhering to quality standards. You will work closely with team members to ensure timely production and the highest level of product quality.

Key Responsibilities:

• Operate and monitor production equipment, ensuring optimal performance.
• Perform regular quality checks on finished products to meet company standards.
• Follow strict hygiene and safety protocols to maintain a safe work environment.
• Assist with troubleshooting equipment malfunctions and perform routine maintenance.
• Record production data and report any issues to supervisors.
• Work in compliance with all safety regulations and production schedules.

Requirements:

• Proven experience in a manufacturing or production environment, preferably in food and beverage.
• Basic knowledge of production equipment and quality control procedures.
• Ability to work in a fast-paced, team-oriented environment.
• Good communication skills and attention to detail.
• Willingness to work flexible hours, including shifts, if required.

Chef Wai brings decades of experience and passion to crafting mouth-watering poached rice and noodle bar dishes that delight the senses by using only the freshest ingredients, sourced locally whenever possible, to create authentic and innovative recipes.

Join Chef Wai's for a truly immersive culinary career in a cozy atmosphere, attentive service, and experience

•⁠ ⁠Dine-in

•⁠ Take Away

•⁠ ⁠Catering Services

•⁠ ⁠Delivery

Marketing Manager

- Reporting to: Managing Director

- Location: New Tech Park

- Job Type: Full Times

Role & Responsibilities

- Develop & implement comprehensive marketing strategies

- Conduct market research on NTP @ Lorong Chuan

- Create creative, social media, influencer and sales plan

- Manage Budget

- Oversea content creation, manage events and campaign

- Provide monthly and regular sales and campaign status, results and reports

- Grow Revenues

- Conduct regular events

- Manage influencers event

Qualification

- Polytechnic/graduate with a recognized qualification

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Oversee inventory to meet production demands and avoid shortages.
• Collaborate with internal teams and suppliers to ensure timely material delivery.
• Adjust production schedules as necessary to meet deadlines.
• Ensure product quality by working closely with the testing team.
• Schedule production staff according to workload requirements.
• Utilize ERP/MRP systems for streamlined planning and scheduling.
• Supervise production staff for effective task completion as required.

Requirements :

• Diploma in Manufacturing Engineering or equivalent.
• At least 1 year of working experience in electronics manufacturing.
• Experienced in material planning, inventory management, and proficient in ERP and MRP systems.
• Possess leadership and supervisory skills.

_________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628