Job Description:

- perform inspection on electrical motors to check for faults to carry out :

a. overhauling works .

b. rewinding works.

c. final inspection after repairs

Requirement:

- ITE/diploma in Electrical Engineering or in the related area or work experience in a related field.

- Fresh graduates are welcome to apply

Reporting to Shift Supervisor, this position will execute and maintain manufacturing process operations by physically performing the task of process control, equipment monitoring and in-process analysis to ensure the production process strictly follows company safety standards and environmental regulations and product quality is within customer's requirement.

Responsibilities:

• Support Shift Supervisor in handling plant start-up, shutdown manufacturing process according to established procedures
• Support production activities such as in-process quality testing, catalyst preparation, equipment preparation for maintenance, loading & unloading of process solvents
• Perform all routine task required to maintain manufacturing process such as monitor process parameters, plant patrolling, data logging and housekeeping
• Perform safe work practices through following safety regulations and supporting safety programs
• Ensure safe working conditions through taking corrective actions to maintain equipment and process condition within safe operating limits
• Perform company emergency response in areas of firefighting, rescue and loss containment
• Maintain plant safety equipment through routine checks
• Execute predictive maintenance to identify and prepare equipment for maintenance before breakdown
• Prepare or update standard operating procedures based on acquired experience and new technical know-how

Requirements:

• Diploma in Chemical Engineering or Chemical and Pharmaceutical Technology, NITEC in Chemical Process Technology or Higher NITEC in Chemical Technology or a related discipline with at least 4 years of relevant experience
• Knowledge in Distributed Control System is advantageous
• Effective team player with good communication skills and high self-motivation
• Able to perform rotating shift work
• Able to perform overtime work when required
• Willing to work in Jurong Island

Responsibilities

• Do electrical works in workshop and onsite
• Must be able to read electrical drawings not limited to line diagram, general arrangement etc
• Tests electrical characteristics, for example, voltage, resistance, and phase angle, in circuits, using voltmeters, ohmmeters etc
• All general work required to complete the installation of electrical wirings and accessories
• Packing and packaging of finished products for delivery
• Supervises and participates in the installation and/or alteration to electrical systems at customer site or in workshop
• To perform site work and field services as and when required
• To provide assistance to the FATs
• To maintain inventory and upkeep workshop safely to high standard of working environment

Requirements

• Singaporeans are welcome to apply.
• With/without experience .
• Able to multi task and perform other duties assigned on ad hoc basis.
• Positive-attitude and having initiative to perform all works allocated to him.

Based in Tuas, Singapore (Transportation provided at selected MRT locations to and fro Plant.)

ABOUT US

Pacific Refreshments Pte Ltd (The Coca-Cola Company) is a strategic concentrate manufacturing plant in Asia. We are an export facility, specializing in the manufacturing of concentrates and beverage bases, with a complex portfolio, supporting the ASEAN, South Pacific and Southwest Asia business units. We are on a journey of growth - having completed the construction and expansion of our site towards doubling our manufacturing capacity in recent years. We have also embarked on our digital transformation journey, striving to be the Lighthouse for the Consumer Products Supply (CPS) plants in Asia and to be a leader in digital transformation.

Pacific Refreshments Pte Ltd is a winner of the ‘2020 HR Asia Best Companies to Work For’ Award.

Position Overview

Responsible for evaluating conformance to Company specifications for all ingredients from receiving to work in process to finished beverage bases, including processes, whether at Plant or at suppliers.

Ensure compliance with good laboratory (GLP) practices and good manufacturing practice (GMP), thereby adding value to the Company’s business.

Responsibilities

• Evaluate ingredients, work in process, and finished beverage bases with physical-chemical, microbiological and sensory evaluation test procedures to ensure conformance to specification and in accordance to Company ‘s Quality system.
• Complete the approval and release procedures for ingredients, packaging materials and finished product and ensure quality data are transacted in SAP/Sample Manager (Laboratory Integrated Management System (LIMs)).
• Ensure ingredients have all pertinent documentation (Certificates of Analysis, pre-shipment approvals, etc. before their final release.
• Sample ingredients, packaging materials, intermediate and final products both within the premises and at external storage if required.
• Calibrate analytical equipment accordingly.
• Conduct laboratory testing of equipment /processes/methods to ensure accuracy and repeatability of quality data through process capability studies, control charting, methods validation, out of specification/out of trend analysis demonstrating that GLP is practiced consistently. Document and maintain records of laboratory procedures, process and test data.
• Keep record of chemicals, glass wares, reagents inventories and MSDS for all chemicals. Support the purchase of laboratory item.

Requirements

• Diploma in Applied science or Food science related discipline.
• Minimum of 1 years’ experience in food/beverage or pharmaceutical multinational organization’s quality control department/laboratory operations.
• Good Manufacturing Practices (GMP) experience would be considered as an advantage.
• Good Laboratory Practices (LGP) experience would be considered as an advantage.
• Demonstrated ability of executing food industry analytical testing.
• SAP knowledge would be considered as an advantage.
• Able to support shift work (7:30am - 4pm / 3:30pm - 12mn).

If this sounds like something you're interested to explore further, we look forward to meeting you in our Happiness Factory!

Roles:

Process Technician will be part of the Operations Team responsible for ensuring Operations processes run smoothly as per production plan. The incumbent is expected to be proficient in troubleshooting and resolving operations and process issues.

Responsibilities:

• Manage safe start up and shutdown of process/unit
• Ensure routine tasks and operations checklists are completed as scheduled
• Issue and close safe work permits and ensure work activities are carried out safely
• Ensure proper handover and takeover during shift change
• Participate in Environment, Safety, Health and Compliance programs

Requirements:

• Diploma with background in chemical or mechanical
• At least 2 years’ of relevant experience in a manufacturing/polymer plant
• Those with Class 1 or Class 2 local boiler attendant certification are encouraged to apply
• Strong interpersonal skills
• Proficient in Microsoft Office
• Good team player, with strong self-initiative
• Experience in DCS operations and controls
• Supervisory skills is advantageous
• Willing to perform 12hour rotating shift work

6 Days / week

Day & Night Shift

High OT

Job Description:

· Operate fixed shear equipment with stationary grab used to cut the process steel scrap.

· Commit to plant safety procedures. Ensure all relevant safety measures are adhered prior to application of permit-to-work.

· Maintenance activities and supporting plant operation to minimize downtime.

· Assist in the maintenance of mobile machineries like Liebherr 954, Cat 336 Grapple / Magnetic and Volvo 480 Grapple.

· Ensure 5S housekeeping to ensure the cleanliness and tidiness of the plant area including control room, lightings are all function, appropriate tools and equipment are in working condition.

· Target for incident free and reliable operations, including timely and proper maintenance of systems.

· Ensure tools and equipment are replenished timely, reinstated and maintained.

· Provide immediate response to incidents and emergencies.

· Any job assigned by the Engineer and Manager.

Job Requirements:

• With or without experience in operating manufacturing machinery

• Independent and Reliable

• Able to work rotating night shift

Responsibilities:

• Install and service casino management system & gaming equipment
• Monitor and carry out all scheduled preventive maintenance programmes for electronic gaming equipment
• Ensure compliance with Casino Regulatory Authority and other statutory requirements, established policies, standard operating procedures, internal control & service standards

Requirements:

• Meet Casino Regulatory Authority’s statutory requirement of minimum 21 years of age
• Prior experience of 1-2 years in a related electronic industry as Technician preferred
• Diploma/Certificate or equivalent in Electrical/ Electronics/ Computer System Engineering/Mechatronics
• Must be able to differentiate colors for work purposes
• Able to work rotating shifts and on weekends and public holidays

- Field service work / Workshop repairs: attend site and perform field work, ie. breakdowns, preventative maintenance, install and commissioning. Workshop tasks: dismantling, assembly, cleaning of parts and using of precision equipment and machinery and apply safety and health rules and taking into consideration the actual site conditions.

- Planning Coordinates: preparation and control of all material, equipment and documentation needed for site activities and organized them in accordance with contractual and supplement documentation

- Repair: Conducts detailed inventories and inspections to determine necessary maintenance and reports. Troubleshoots and repairs equipment and recommends changes such as new equipment or modified procedures to improve performance and customer satisfaction.

- Reporting: prepares all technical and work reports to be signed by customer representative

- Customer regulation: obtaining certain passes or attending classes for commencing of works.

* Nitec certificate or 2 to 5 years xperience working as turbochargers on marine vessels or mechanical fitter or diesel fitter

* Knowledge of turbocharging would be an advantagaeous

* Strong in service delivery and troubleshooting

* Customer centric

* Team player

Job Description

• Plant maintenance
• Support production packaging
• Work at cement plant inside Jurong Port(not Jurong Island)
• Alternate Saturday off

Requirement

• Higher NITEC and above
• 3 years relavant experience
• Ability to read schematic, applying knowlegde to trouble shoot/rectify problems
• To communicate and collaborate with team effectively
• Mechanical or electrical skills

Salary: Basic $2,000 - $3,000 + $40 mobile allowance + OT applicable + VB

Time: Monday - Friday (8.30am - 5.30pm)

Location: Benoi Road

Responsibilities:

• Servicing and repair of material handling equipment i.e. disesel and electric fork lift / MHE.
• Troubleshoot and rectify MHE issues.
• Other tasks as assigned by workshop supervisor.

Requirements:

• Must possess Class 3 Driving License.
• 1 Year relevant working experience in servicing/ repairing electrical and/ or diesel forklift or automotive/ industrial equipment repair experience.
• Good communication skills.
• Able to read, speak and write English.
• NITEC in Automotive or equivalent preferred.
• Must be able to do standby shifts 2 weeks every quarter including weekends and public holidays and handle passive standby 2 weeks 3 times a year.

Please submit your updated resume by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform you that only shortlisted candidates would be notified.

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Lon Kei Hin | EA Personnel No.: R23116368

Job Description:

- Setting up, maintaining and regular lubrication of machines.

- Run production to produce required output.

- Carry out effective in – process inspection

- Carry out adjustment of tooling and change of worn out tooling.

- Trouble shooting of production problem.

- Daily housekeeping.

- Training of operators & new staff

Job Requirements:

- Nitec in mechanical or electrical background preferred

- Able to comply to safety procedures.

-Must be able to lift heavy objects

- Able to commit to work shift work

Element has an opportunity for a Metallurgy Technician. In this role, your primary responsibility is to perform routine, metallurgical, mechanical, failure, corrosion testing facilitating metallurgy operations at site or at a laboratory.

This role is based in Tuas location.

Job Duties:

• Perform routine mechanical testing (tensile, bend, charpy impact, hardness) including CTOD and metallurgical testing (micro / macro examinations) Involvement in site / field testing
• Coordinating with the technicians in the team to carry out work as per the planning schedule and assist with hazard identification and risk assessment exercises within their areas of responsibility
• Conduct either or combination of testing, analysis, calibration, monitoring, sampling and collection and sample preparation as directed
• Carry out routine laboratory tests, analysis, machining or preparation in line with authorized technical competence
• Carry out daily sample collection and ensure work compliance to ISO 17025 requirements

Job Description:

• Possess a minimum of Diploma in Metallurgy or related discipline, with 2-4 years of relevant working experience
• Good knowledge on international standards and codes
• Possess driving licence
• Good communication skills
• Self-motivated team playing with excellent organisational and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

• Routinely inspecting electrical systems such as wiring, fixtures, and appliances.
• Identifying faults or hazards.
• Troubleshooting system failures.
• Reviewing blueprints to understand wiring placement.
• Testing of electrical systems with oscilloscopes, voltmeters, and ohmmeters.
• Conducting maintenance repairs on old or faulty fixtures.
• Responding to fault requests.
• Providing suggestions for equipment replacement.
• Writing electrical maintenance reports.
• Installing new electrical appliances in the building.
• Adhering to safety and performance standards.

Core responsibilities

• Perform counting on gold jewellery
• Quality Check on Hallmark conditions
• Perform Hallmark on Gold Articles

Requirement

• Able to work under laboratory setting for fire assay and XRF
• Good eyesight (with our without glasses) and strong attention to details
• Good communication skills
• Able to work independently with minimum supervision as well as a team player

Job Duties:

• Perform Calibration and Measurement of Dimension gauges and instrument as per WI using CMM, reference master, tester etc (on site and in-house) with report and necessary administrative work.
• Conduct routine maintenance of lab equipment as schedule and assigned
• Ensure Proper Delivery of Service to customer(s)
• Any other duties as assigned by Manager / Section Head / Senior staff

Job Requirements:

• Minimum ITE or Diploma in Aerospace / Precision or Mechanical Engineering
• Fresh graduates are welcome to apply
• Comfortable with night shift work
• Good to have basic knowledge on dimension instrument calibration and CMM measurement.
• Able to work under pressure with acceptable level of output and able to complete work according to deadlines set.
• Good working attitude and to maintains good interaction with colleagues and customers

This role is based in Singapore. During probation period, you will go through OJT during office hours.

The official working hours for this position is night shift from 7pm to 7am (12 hrs shift, Mondays to Fridays)

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

• Participate in the CQV activities of lab equipment within a GMP environment
• Protocol Development (IQ, OQ, PQ) and execution
• Interface with client personnel and with outside vendors when necessary while performing the above.
• Must have execution experience.
• The individual will manage all facets of assigned validation projects while maintaining strong communication with client representatives on project status and assistance needed.

We are expanding and are looking for a dedicated Diving Technician to join our team

Responsibilities

• Conduct repair and maintenance of company’s diving plant and equipment as per manufacturers’ recommendations.

• Ensure all diving equipment are in compliance with Company, SS511 and International standards.

• Maintain a Planned Maintenance System for all equipment.

• Manages, Co-ordinates and Prepares for Equipment Audits

• Supervise all activities involving mobilization/demobilization of plant and equipment from workshop.

• Keeping up to date of equipment to fit project requirements and compliances, where applicable.

• Maintain and implement the project quality assurance system in line with the corporate quality assurance program.

• Any other ad-hoc assignments

Requirements:

• Have knowledge of relevant SS511 and International Standards (IMCA, ADCI, OGP) requirements.

• Possess technical experience in diving field.

• Possess relevant Dive Technician and KMB Hat Technician certification

• Have basic computing skills ( ie Microsoft Office) will be an added advantage.

• Proficient in written and spoken English

• Able to work in a team

We are looking forward to hear from you. we regret to inform that only shortlisted candidates will be notified

• Cleaning equipment
• Ordering supplies
• Keeping records
• Conducting tests to determine the coloring, nutrients, moisture levels, and other factors within a food item under supervision of a food scientist
• Analyzing test results
• Compiling presentations on the material
• Monitoring food cooking machines and making adjustments to the controls for devices such as boilers, ovens, fryers and cookers

Job Description:

- Required to install, calibrate, inspect, service, and repair cooling tower machinery for the office

- Examine parts of the cooling tower machinery for defects

- Clean and maintain, or adjust parts of the cooling tower machinery

- Adhoc duties assigned by the supervisor

Work location is at Buroh Lane.

Key Responsibilities

To produce components by assembling parts and subassemeblies.

Roles & Responsibilities

· Read and understand instructions and follow procedures

· Align material and put components/parts together

· Perform pre-assembly activities such as cleaning, deburring, lubricating of parts

· Take part in stock take

· Maintain good housekeeping within work area

· Keep records of production quantities and time

Working Hours

Monday to Friday, 8.30am to 6.00pm

Sample Preparation

· Receive and label all samples brought into the lab for accountability.

· Prepare samples from drying, crushing, splitting and pulverising.

· Mix fluxing reagents and load samples in furnace for the fire assay.

· Mix reagents for acid digestions.

· Perform fire assay techniques such as fluxing, fusing and cupellation of samples in correct numerical order.

· Perform smelting and sample extraction of precious metals as and when required

Setting up of Fire Assay Laboratory

· Assist with the set-up of laboratory, prepare the SOPs for Fire Assay techniques.

Measurement & Calibration

· Monitor analytical processes and take remedial action where deviations / discrepancies arise impacting on the quality of analytical results.

· Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab Manager

Perform Laboratory Data Analysis and Reporting

· Testing of precious metals scraps through cupellation method (fire assaying).

· Evaluate, validate, ensure and report technical accuracy of reporting analytical results

· Monitor analytical processes and take remedial actions where deviations / discrepancies arise impacting the quality of analytical results.

· Re-analyse analysis samples when control results are not within the acceptable range.

Quality Control

· Inspect samples, fusions, lead buttons and prills to ensure the assaying method is correct.

· Maintain records and accountability of materials (samples and standards) and equipment used.

Equipment Maintenance and Troubleshooting

· Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab manager

· Procurement and placement of all consumables, equipment and fixtures.

· Assist in the general / preventive maintenance of equipment and housekeeping of the laboratory.

· Maintain and record equipment faults.

· Troubleshooting of analysis methods.

Laboratory Housekeeping

· Ensure and maintain work areas and equipment are clean, tidy and organised.

Manpower Planning

· Assist with overtime planning in consultation with the Lab Manager.

· Assist with control and time keeping administration.

· Maintain productivity and turnaround time.

Compliance with Safety Protocols and Local Regulatory

· Assist with the application and maintenance of all necessary governmental licenses related to the laboratory. (Eg: DoE, DOSH, BOMBA, Poison Act etc.)

· Promote and implement workplace safety initiatives

· Ensure and maintain proper sample disposal of cupels, fire assay lead

wastes or water generated as a part of daily work performed in a safe manner and in compliance with the disposal regulations and requirements.

· React appropriately and immediately to emergency situations and assists other employees in maintaining readiness to respond to emergencies within the workplace.

Job Requirement

Educational & Professional Qualifications

· Minimum Diploma qualification in Chemistry or its related field.

Relevant Experience

· At least 3 years’ experience as a Fire Assayer.

· Demonstrated understanding of the analytical processes in Fire Assay and the analysis process.

· Problem solving skills.

· Have experience in selecting and setting up of equipment and processes to recover precious metals including gold, silver, platinum, palladium, rhodium is an advantage.

· Possess experience and the ability to operate ICP / XRF is an advantage.

· Must be willing to work overtime whenever necessary.

· Knowledge in safe handling of industrial chemicals.

· Possess effective verbal and written communication skills.

Job Details

• 3 cycles rotating shift
• Location : Tuas
• Company transport pick up and drop off at residence
• AWS, Variable Bnus and other employee benefits

Reporting to the Shift Superintendent, you will be stationed in the field (petrochemicals environment) to perform manual task following safe work procedures in place:

• Handles daily operational task in process plant
• Operates and monitor equipment in assigned sector or plant
• Manual work involvement

Job Requirements:

• Nitec/Diploma with ability to read, write and speak in English
• Must be able to work 3 cycles rotating shift
• Minimum 3 years working experience in petrochemicial industry preferred
• Candidates who possess a valid forklift license will be advantageous
• Fresh graduates and/or those without experience are encouraged to apply as training will be provided.

Interested applicants, please apply with your latest resume indicating reason(s) for leaving previous employment(s), notice period and expected salary.

Summary

Provide assistance and support the Assistant Manager, Facilities in the maintenance and housekeeping functions.

Major Duties and Responsibilities:

• Survey buildings and repair mechanical systems to ensure they are consistent with health and safety standards.
• Perform maintenance of electrical systems (replace light bulbs and sockets, clean and repair circuit breaker panels etc.)
• Assist in the setup of ventilation, air Conditioning and other systems and conduct repairs when necessary.
• Assist in installation, testing, commissioning and troubleshooting of CCTV, electrical wiring, cabling installation and electronic circuit.
• Maintain plumbing systems to ensure functionality.
• Perform manual repairs when necessary (fix locks, replace windows etc.)
• Undertake activities of pest control such as spraying insecticide.
• Conduct general upkeep procedures and other tasks as assigned (painting, carpentry etc.)
• Undertake any other related assignment that may be given by the manager and/or his/her designate.

Requirements

• Minimum Nitec (NTC-3) or equivalent qualification in electrical/mechanical.
• At least 1 year experience in building maintenance or 2 years of relevant experience.
• Proven experience as maintenance technician.
• Basic understanding of electrical and plumbing work.
• Knowledge of general maintenance processes and methods.
• Working knowledge of tools, common appliances and devices.
• Manual dexterity and problem-solving skills.

ALATAS Crane Services Worldwide are a crane service specialist with a global set-up of 14 offices worldwide and are active in the Ship-, Offshore-, Port- and Construction industry.

In our workshop we offer professional repair for hydraulic- & mechanical components such as Pumps, Motors, Cylinders, Gearboxes, Hook Blocks, full refurbishment of Cranes, Grabs, Deck Machinery...

To support our professional workshop team, we are employing an experienced Workshop Technician for the following:

JOB DESCRIPTION:

• Overhaul & repair of hydraulic & mechanical components and other machinery parts
• Steel repairs on Grabs, Windlasses & other Deck Machinery Parts

REQUIREMENTS:

• NTC 3 (or higher) in Mechanical Engineering or equivalent
• At least 3 years of working experience in the assemble, dismantle, service & repair of pumps and machinery parts
• Welding qualifications will be an added advantage
• Pro-active team player, with the right working attitude and willing to work overtime

ALATAS Crane Services Worldwide are a crane service specialist with a global set-up of 14 offices worldwide and are active in the Ship-, Offshore-, Port- and Construction industry.

In our workshop we offer professional repair for hydraulic- & mechanical components such as Pumps, Motors, Cylinders, Gearboxes, Hook Blocks, full refurbishment of Cranes, Grabs, Deck Machinery...

To support our professional workshop team, we are employing an experienced Workshop Technician for the following:

JOB DESCRIPTION:

• Overhaul & repair of hydraulic & mechanical components and other machinery parts
• Steel repairs on Grabs, Windlasses & other Deck Machinery Parts

REQUIREMENTS:

• NTC 3 (or higher) in Mechanical Engineering or equivalent
• At least 3 years of working experience in the assemble, dismantle, service & repair of pumps and machinery parts
• Welding qualifications will be an added advantage
• Pro-active team player, with the right working attitude and willing to work overtime