• Provide electrical and technical support to the Operations team with electrical troubleshooting
• Prepare electrical spares in workshops to be in acceptable working conditions
• Perform electrical troubleshooting and PLC troubleshooting to increase productivity and lower maintenance cost with high uptime
• Optimize power system to ensure sustainability
• Create and maintain electrical drawing library documenting machine details and modifications
• Ensure top notch Safety, housekeeping and greenery in area of work
• Support all improvement projects such as machine, productivity and safety improvement projects

Job Requirements:

• Min GCE N Level, NITEC / ITE, or equivalent
• Candidate with no working experience are welcome to apply
• Min 1 year of relevant experience in manufacturing environment
• Able to interpret electrical circuit and diagram
• Able to work independently as well as a team player

Responsibilities

-Liaise with immediete Supervisor & SHE Supervisor in any high risks work to be carried out.

-Maintain good Housekeping at end of work completion.

-Perform electrical equipment installation and maintenance work as per client's electrical drawings and specification.

-Perform site inspection and testing of electrical equipment and installation.

-Perform troubleshooting and repair/rectify electrical equipment.

-Assist Electrical Supervisor to complete punch list and pre-commissoning work for electrical equipment and installatons.

-Comply with the site safety regulations and work permit procedures when carrying out the electrical works.

Requirements

-NTC-2 level or more in electrical/electronics engineering or secondary education or trade certificate, LEW certificate will be added advantage

-At least 3 years experience in process plant equipment

-Have the knowledge about material, such as conduits, fitting, cable, wires and others

-Familiar with electrical equipment, such as voltmeter, ammeter, IR-tester, ELCB tester, etc.

-Good practical knowledge of electrical safety practices

-Good knowledge of electrical schematic and control wiring diagrams.

-Understanding of fundamentals of hazardous area classification and ex-proof equipment

-Can do electrical work independently and also work as a team

Job Description & Requirements

1. Carry out daily inspection for facility plant equipment.
2. Carry out periodic maintenance of machines & ensure that all potential environmental impact associated with the machineries are minimized & mitigated.
3. Carry out schedule and preventive maintenance works.
4. Attend to breakdowns and assist in repair works, and escalate calls for vendor support if necessary.
5. Update and maintain records of plant equipment and machinery.
6. Upkeep the spare parts list and ensure purchases requisitions are made.

Competence Requirement

· Preferred to have NTC/ Diploma in Mechanical / Mechantronics / Electrical Engineering field.

• Fresh may be considered, but preferred with 1 – 2 years of related experiences in Maintenance of Equipments.

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Job Highlight

• Basic Salary + High Commission + Variable Performance Bonus (earn up to $4000)
• 5 days/6 days work week
• Medical Benefits, Insurance Coverage
• Staff Purchase Discounts

Responsibilities:

• Attend to customer request and enquiries on Computer Components / Repair Service / PC Customisation
• Recommend the ideal Computer Components to customer according to their individual preference through knowledge sharing
• Maintain good relationship with customers to build customer loyalty
• Basic housekeeping of work area
• Assist in retail operations, e.g. stock take
• May be required to be involved in Trade Fair and related events

Knowledge & Skills:

• Possess good communication & interpersonal skills and is a team player
• Presentable disposition & well-groomed
• Retail sales target achievement
• Customer relationship management – maintain and create new customer profile
• Ensure inventory management for individual counter
• Ensure excellent customer service is given to the customers (e.g. product knowledge)

Responsibilities:

• Work in a team to maintain the mechanical or electrical installation and equipment.
• Assist in the installation, operation and maintenance of Company's manufacturing plant machinery, building and associated facilities.
• Carries out inspection and servicing of the Company's mechanical and electrical installations, building and associated facilities, air-conditioning units, machinery and equipment.
• Attend to requests / complaints from users and carries out minor repairs.
• Liaise and attend to outside contractors during major repairs or installation works and provides assistance as required.

Requirements:

• ITE/Diploma in Electrical, Mechanical, Building Services, Facilities Management or equivalent.
• Preferably with some relevant experience in building, facilities and M&E services maintenance.
• Able to support duty on weekend/Public Holiday or perform 12 hrs rotating (Day/ Night) shift when required.

Shift Type / Work Hours:

Normal Shift (5 days work week)

7.50am to 4.55pm

This position will be placed under 1 year contract role.

Benefits:

1. Company transport provided at designated pick-up points island-wide.
2. Medical insurance coverage.
3. In-house canteen at subsidized prices.
4. Employee Flexible Benefits scheme.

Please visit our corporate website for more information on Seiko Epson Corporation.

Job Description & Requirements:

• PC / Notebook / AIO system diagnostic.
• Assist and advising customer the best solution for their repair / upgrade / customization.
• Handling of hardware and software installation.
• Training will be provided.
• Basic Salary + High Commission + Variable Performance Bonus
• 5 days/6 days work week
• Medical Benefits
• Staff Purchase Discounts

Job Description & Requirements:

• PC / Notebook / AIO system diagnostic.
• Assist and advising customer the best solution for their repair / upgrade / customization.
• Handling of hardware and software installation.
• Training will be provided.
• Basic Salary + High Commission + Variable Performance Bonus
• 5 days/6 days work week
• Medical Benefits
• Staff Purchase Discounts

Job Description & Requirements:

• PC / Notebook / AIO system diagnostic.
• Assist and advising customer the best solution for their repair / upgrade / customization.
• Handling of hardware and software installation.
• Training will be provided.
• Basic Salary + High Commission + Variable Performance Bonus
• 5 days/6 days work week
• Medical Benefits
• Staff Purchase Discounts

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

About Us

Established over a hundred years ago, Takasago is a global leading company in the flavour and fragrance industry, having developed flavours and fragrances for some of the world’s most successful manufacturers of foods, beverages, fine fragrances, home, and personal care products.

For over 35 years, we have been a leading industrial producer of L-Menthol, using our core technology, asymmetric synthesis.
This technology enables us to produce unique, novel, and nature-identical aroma ingredients, and in addition, to manufacture pharmaceutical intermediates, functional materials, and other fine chemicals.

Takasago Group maintains offices, production sites, and R&D centers in twenty-seven countries and regions.

Responsibilities:

• To assist senior for routine work involving sample management, registration.
• Involve in the preparation of sample for analysis and retrieving of reference sample.
• Maintain and house keep sample retain room
• Request sample from compounding lab as required
• Prepare reference samples/samples for affiliates as required
• Some basic knowledge of chemical and experiences in the chemical environment are preferred
• Maintain and ensure clean and safe working environment in FRQC Lab
• Clean lab equipment, glassware and apparatus after use
• Carry out any additional job-related duties that may be assigned from time to time

Requirements:

• Basic laboratory knowledge and experiences in chemical working environment required
• Able to read, speak, write basic English
• Minimum qualification with a Diploma in Chemical or relevant study
• Good communication and interpersonal skill
• Good organizing skill
• Basic knowledge of MS office

Criteria

• Have electrical and mechanical knowledge and experience, understand basic electrical wiring
• Able to communicate in English; and able to write basic service report
• Able to work overtime

Site Work

• Attend and response to site duty immediately
• Lead a Team to attend to site job
• Hands on on repair job together with the Team
• Work as a Team with fellow colleagues at site
• Plan ahead and do scheduling in advance
• Attend to weekly and monthly meetings with customers
• Follow up with customers on pending matters

Have right attitude and sense of responsibility

In this role, you will provide support to the Engineer/Manager and work together with the Operations and Maintenance team to achieve operational excellence in wastewater treatment facilities and related infrastructures.

Job Description:

• Routine monitoring of the plant to do visual inspection of equipment and structure;
• Routine check of parameters and registering in log sheet; log sheet preparation;
• Operating the plant various process with HMI/SCADA system;
• Control and monitor the water treatment quantity and quality as well as the quality along the plant upstream process.
• Ensure all permits to work (PTW) are carried out in accordance with company's policy.
• Taking corrective actions during the process parameters deviation.
• Document/Digitalize operation data on a daily basis for engineers to do decision /making/analysis. Assist in plant operation normalisation and ad-hoc on-site checking of equipment process;
• Support plant maintenance activities;
• Chemical receiving, chemical preparation, plant housekeeping, etc.
• Support any other site activities as delegated by the Engineer or Manager.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine.
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• At least NITEC in Engineering discipline
• Entry Level candidate are encouraged to apply
• Class 3 driving licence/Forklift driving licence an added advantage
• Able to work 44 hours week, may require to work on regular hours or 12 hours rotating shift
• Good chemistry will be advantageous.
• Self-motivated and able to handle wide spectrum of responsibilities

Responsibilities:

• Perform assembly builds
• Ensure assembly builds are completed as scheduled and according to required specifications, drawings and work instruction.
• Work with engineers to conduct experiments
• Report manufacturing problems and assist in problem-solving and troubleshooting.
• Perform housekeeping and comply with manufacturing discipline and cleanroom protocol.
• Other ad-hoc duties

Requirements:

• Min NITEC/ Higher Nitec or Diploma in Engineering or its equivalent
• Able to comprehend schematic / mechanical drawing
• Able to commit rotating shifts

Interested candidates kindly click the APPLY NOW button.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

Xie Jiani (R1548854)

EnviroDynamics Solutions Pte Ltd

EA License No.: 12C6285

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. There will be opportunities to acquire advanced CAD/CAM skills and equipment operations through involvement in industry and competitively funded projects related to remanufacturing process technologies. The roles and responsibilities include the following areas:

-Perform material testing, sample preparation, dimensional measurements, surface quality inspection, microstructure & defects analysis.

-Tracking and managing lab resource utilization, procurement, and delivery.

-Storage space management and optimization.

-Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

-Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

-Assist in scheduling equipment utilization and procurement for project consumables.

-Assist in lab equipment operation, collection of process data and analysis of results.

-Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

-Identify and recommend improvement measurements to ensuring high quality in lab safety and 5S standards.

Detailed Job requirements:

• Polytechnic/ Technical Diploma in Engineering
• 1-2 years of experience working in a lab is preferred.
• Experience with engineering CAD/CAM software such as NX UniGraphics, SolidWorks, AutoCAD will be advantageous.
• Strong attention to detail.
• Excellent verbal and written communication skills.
• Proficient in MS office.
• Ability to learn and adapt new technologies to stay relevant.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. There will be opportunities to acquire advanced CAD/CAM skills and equipment operations through involvement in industry and competitively funded projects related to remanufacturing process technologies. The roles and responsibilities include the following areas:

-Perform material testing, sample preparation, dimensional measurements, surface quality inspection, microstructure & defects analysis.

-Tracking and managing lab resource utilization, procurement, and delivery.

-Storage space management and optimization.

-Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

-Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

-Assist in scheduling equipment utilization and procurement for project consumables.

-Assist in lab equipment operation, collection of process data and analysis of results.

-Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

-Identify and recommend improvement measurements to ensuring high quality in lab safety and 5S standards.

Detailed Job requirements:

• Polytechnic/ Technical Diploma in Engineering
• 1-2 years of experience working in a lab is preferred.
• Experience with engineering CAD/CAM software such as NX UniGraphics, SolidWorks, AutoCAD will be advantageous.
• Strong attention to detail.
• Excellent verbal and written communication skills.
• Proficient in MS office.
• Ability to learn and adapt new technologies to stay relevant.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include operation of high-power lasers for cleaning related experiments, metal and composite sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. The roles and responsibilities include the following areas:

· Perform high-power laser material processing using robotics, CNC and hand-held systems on-site of ARTC and occasional visit to customer sites.

· Perform material testing, sample preparation, microstructure & defects analysis in fabricated coupons and parts.

· Tracking and managing lab resource utilization, procurement, and delivery.

· Storage space management and optimization.

· Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

· Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

· Assist in scheduling equipment utilization and procurement for project consumables.

· Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

· Identify and recommend improvement measurements to ensuring high quality in lab safety and 8S standards

Detailed Job requirements:

· Polytechnic/ Technical Diploma in Engineering

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Experience with high-power laser is preferred.

· 2 years of experience working in a lab is preferred.

· Strong attention to detail.

· Proficient in MS office.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include operation of high-power lasers for cleaning related experiments, metal and composite sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. The roles and responsibilities include the following areas:

· Perform high-power laser material processing using robotics, CNC and hand-held systems on-site of ARTC and occasional visit to customer sites.

· Perform material testing, sample preparation, microstructure & defects analysis in fabricated coupons and parts.

· Tracking and managing lab resource utilization, procurement, and delivery.

· Storage space management and optimization.

· Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

· Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

· Assist in scheduling equipment utilization and procurement for project consumables.

· Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

· Identify and recommend improvement measurements to ensuring high quality in lab safety and 8S standards

Detailed Job requirements:

· Polytechnic/ Technical Diploma in Engineering

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Experience with high-power laser is preferred.

· 1-2 years of experience working in a lab is preferred.

· Strong attention to detail.

· Proficient in MS office.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Principal Duties/Responsibilities

Carry out tests in accordance to the standard methods.
Ensure data generated in laboratory meets all the requirements of the “data handling guideline” procedure, enforced in the laboratory.
Review and repeat tests if suspicious or abnormal results are encountered.
Maintain good housekeeping of work area by cleaning up (cleaning glassware, cleaning instruments, clearing samples etc.) after each test.
Assist chemists in new methods development.
Standardize reagent/equipment, prepare titration solvents and test solutions when necessary.
Perform any tasks as assigned by management.
Maintain cleanliness of work area during work and before handing over to the next shift.
Work overtime when required.

Requirements

Minimum ITE/Diploma in Chemistry/Chemical engineering/ Science related background
One year of working experience in testing laboratory industry preferred
Physically fit, medical condition should not interfere with laboratory analysis.
Able to work in a team and willing to multi-task
Able to commit OT if required.
Good attendance.

Benefits

Salary depends on experience
Variable performance bonus
Medical & Insurance coverage
Career progression

Technician Responsibilities:

• Diagnose, troubleshoot and repair mobile devices;

• Quality control and testing of repaired devices to ensure full functionality. Resolve/manage customer inquiries;

• Able to interact positively with customers at the storefront and over the phone;

• Ability to multi-task between repairs and customer service;

• Other related duties as required;

• Maintain and use repair tools and equipment. Including software and in-store POS system to track repair tickets and inventory;

• Strategically plan the order of operations to ensure a successful repair;

• Provide estimates and quotes;

• Glass only replacement on Samsung and iPads;

• Microscopic Board work; component replacement Hand-solder SMT components,

• remove and replace thru-hole comp without board damage,

• solder wires and cables,

• Diagnosis, troubleshoot and repair mobile devices;

• identify assembly and documents issues;

• Repair logic board issues from water damage.

Requirements:

• Excellent knowledge of customer service best practice with previous experience;

• Ability to repair a variety of mobile devices (i.e., iPhone, Samsung, LG, Motorola, Sony, Huawei and OnePlus phone, and iPads.);

• Ability to communicate effectively with a wide variety of people in a professional manner, face to face, on the telephone and in writing;

• Knowledge of mobile devices including manufacturers, operating systems, and network service providers;

• Willing to work flexibly and with enthusiasm;

• Excellent organizational skills;

• Good attention to detail and ability to show initiative;

• Ability to demonstrate practical troubleshooting and problem analysis techniques;

• Ability to plan and prioritize your workload without supervision

About Us

Established over a hundred years ago, Takasago is a global leading company in the flavour and fragrance industry, having developed flavours and fragrances for some of the world’s most successful manufacturers of foods, beverages, fine fragrances, home, and personal care products.

For over 35 years, we have been a leading industrial producer of L-Menthol, using our core technology, asymmetric synthesis.
This technology enables us to produce unique, novel, and nature-identical aroma ingredients, and in addition, to manufacture pharmaceutical intermediates, functional materials, and other fine chemicals.

Takasago Group maintains offices, production sites, and R&D centers in twenty-seven countries and regions.

Responsibilities:

• Samples preparation and product testing to support fragrance projects and product development for all types of Laundry care, cosmetics, personal care and Fine fragrance products.
• Monitor the application tests and evaluate its stability in term of both olfactive and appearance, preparation of reports for both internal departments and sales.
• Perform test (stability, pH and viscosities) and application of fragrance for evaluation
• Participate in panel testing of fragranced products
• Observe the durability of the samples and report on abnormality
• Assist in formulating new bases, policies and procedures
• Preparation of application and samples for sensory testing by Perfumer, CFG’s
• Maintain and track stock level of laboratory equipment and supplies such as glass bottles, raw materials etc, for base formulation
• Operate, maintain, calibrate and sterilize laboratory equipment and work areas
• Systematic filing and maintenance of formulation and records
• Regularly check and ensure raw materials are stored at correct temperature to ensure quality and safety
• Ensure that bio-hazardous materials are disposed safely
• Perform standard laboratory tests in according to prescribed procedures and recording of test results
• Maintain and ensure a clean and safe laboratory environment and workplace

Requirements:

• Diploma in Chemical Process Technology or equivalent in years of similar experience
• Basic sensory skills
• Basic Chemistry and Aroma Chemicals
• Basic laboratory procedures and methodology

We are looking for Marine Technicians who will be responsible for maintaining and repairing various marine vessels and equipment. This role requires a strong understanding of marine mechanics, electronics, and systems to ensure the safe and efficient operation of boats and ships. The Marine Technician will work closely with engineers, vessel operators, and other technical staff to diagnose issues, perform routine maintenance, and implement repairs.

• Maintenance and Repairs: Conduct routine maintenance and repairs on marine engines, propulsion systems, and other mechanical and electrical components of vessels.
• Diagnostics: Use diagnostic tools and equipment to identify and troubleshoot issues in marine systems.
• Installation: Install new equipment and systems on vessels, including navigation aids, communication devices, and safety equipment.
• Inspections: Perform regular inspections of vessels to ensure compliance with safety and regulatory standards.
• Documentation: Maintain detailed records of maintenance and repairs performed, including parts used and time taken.
• Testing: Conduct tests on repaired systems to verify their proper operation and ensure that all repairs meet manufacturer and regulatory standards.
• Customer Service: Provide excellent customer service by communicating effectively with vessel owners and operators about maintenance needs and repairs performed.
• Safety: Adhere to all safety protocols and standards to ensure a safe working environment both onshore and offshore.

Qualifications:

Education

• A high school diploma or equivalent is required.
• Technical training or certification in marine technology or a related field is highly desirable.

Experience

• At least 2-3 years of experience in marine maintenance and repair with navigation, communication & automation equipment.
• Experience with onboard vessels
• Familiarity with diagnostic tools and equipment specific to marine systems.

Production operations ​

• Operates the machines & robots as per the global best practices & Standard operating procedures to deliver fragrance oils or application samples as per the business priorities & the due delivery dates​
• Ensures compliance with Good manufacturing practices guidelines for each robot operation​
• Performs the first level of maintenance and simple repairing operations (Nominal values, clean up part of machine ....) as per the global Standard operating procedures​

​

QHSS&E​

• Ensures all operations are done in compliance with Corporate HSS&E procedures and proactively contributes to the improvement of laboratory safety​
• Maintains a clean and well-organized work environment ​
• Ensures all samples produced meet the quality standards as per the global SOPs before releasing the samples​
• Reports any non conformance to the laboratory supervisor or manager, proposes and tests solutions​
• May be a QHSS&E champion​

​

Stock management​

• Manages the stocks & ensures permanent availability and freshness of raw materials, packagings and consumables​

​

Continuous improvement and efficiency​

• Adopts a culture of continuous improvement, and actively participates in LEAN projects​
• Operates with a team spirit mindset and supports the colleagues under high workload situations​
• Identifies operational inefficiencies and propose actions using lean Management principles and guidelines​

​

Leadership​

• Contribute to team success – Active participation to move the team toward the completion of collective success​
• Train Junior technicians ​

​

Monitoring of performance​

• Understands and monitors the KPIs with all digital tools to deliver local site targets for automation ratio, Service rate and Punctuality rate

Job Description:

Install, maintain, and repair electrical and mechanical systems, ensuring safety and efficiency.


Key Responsibilities:

1. Electrical installations, testing, and maintenance
2. Mechanical system installations, maintenance, and repairs (pumps, motors, HVAC)
3. Troubleshooting and repair of electrical and mechanical faults
4. Conduct safety inspections and risk assessments
5. Collaborate with engineers and technicians on projects
6. Develop and implement maintenance schedules


Requirements:

Essential:

1. Diploma/Certificate in Electrical/Mechanical Engineering or related field
2. 3+ years of experience in electrical mechanical technical works
3. Strong technical knowledge and problem-solving skills
4. Valid electrical/mechanical license/certification (if applicable)
5. Excellent communication and teamwork abilities


Desirable:

1. Experience with industrial control systems and automation
2. Knowledge of safety regulations and standards (e.g., OSHA)
3. Familiarity with building management systems (BMS)
4. Certification in electrical/mechanical trades (e.g., NETA, NICET)

Skills:

1. Electrical circuit analysis and troubleshooting
2. Mechanical system design and installation
3. Control panel wiring and programming
4. Safety procedures and protocols
5. Team collaboration and communication


Physical Demands:

1. Work at heights and in confined spaces
2. Lift/move heavy equipment (up to 50 lbs)
3. Frequent standing, walking, and manual dexterity


Working Conditions:

1. Indoor/outdoor work environment
2. Flexible schedule (overtime, on-call rotations)


What We Offer:

1. Competitive salary and benefits package
2. Opportunities for professional growth and development
3. Collaborative and dynamic work environment

We are seeking a motivated and detail-oriented Environmental Technician and Survey Assistant to join our team. This role will involve supporting environmental monitoring and survey activities across various land and marine environments. The successful candidate will assist in collecting and analysing environmental data, operating field equipment, and supporting survey teams in both field and lab settings. If you are passionate about environmental work and eager to contribute to conservation efforts, this position offers a great opportunity to grow.

Key Responsibilities

• Assist in environmental surveys, including water, soil, and air quality assessments.
• Collect, record, and process samples from various ecosystems (marine and terrestrial).
• Set up, operate, and maintain environmental monitoring equipment such as water quality probes, GPS devices, and surveying instruments.
• Assist in mapping, measuring, and documenting environmental features and conditions.
• Help prepare survey reports and data summaries for analysis and reporting.
• Follow established safety and environmental protocols while conducting fieldwork.
• Support the environmental team in organizing and managing survey equipment and data.

What You Will Need:

Education and Experience

• Relevant qualifications in environmental science, biology, or a related field.
• Prior experience in environmental monitoring or survey work is an advantage but not required.
• Strong interest in environmental conservation and sustainability.
• Knowledge of environmental monitoring equipment and survey techniques (marine and land-based).
• Any diving experience or drone piloting experience will be an advantage.

Knowledge, Skills, and Abilities

• Physical ability to work outdoors in varying weather conditions.
• Excellent attention to detail and ability to follow precise procedures.
• Good communication skills and the ability to work effectively as part of a team.
• Experience working at sea on a boat is preferable.