General Overview

This position is part of the Production team performing LNG Terminal operations of loading and unloading of LNG from vessels and re-gasification process of LNG for the natural gas pipeline network supply. The position requires the incumbent to perform fieldwork and operate the DCS. The incumbent will work closely with the marine, technical and maintenance team to perform the operations.

Roles and ResponsibilIties

The primary duties are listed as follows:

• Perform routine field inspections on equipment operating conditions to ensure safe operating limits.
• Perform unloading of chemicals/utilities into receiving tanks.
• Perform jetty operations such as berthing in of vessels, operating marine loading arms and undertake Loading Master role.
• Operate DCS to monitor and control the overall terminal process within the design parameters and to meet customers’ gas nomination requests.
• Maintain comprehensive unit logs with proper data of all activities occurring in the shift and to ensure proper changeover of shift including any follow-up activities requirement.
• Support other production activities in relation to other businesses and services such as vessel cool down, cold energy transfer, LNG Truck Loading etc.
• Perform troubleshooting on equipment and processes when necessary.
• Take corrective action to ensure unit and equipment are operated under safe and optimum conditions. Generate work orders for maintenance work on equipment when necessary.
• Secure and prepare equipment and work sites for maintenance work according to Safe Operating Procedures requirements such as equipment lock-out and tag-out, low tension electrical de-energization etc.
• Perform basic maintenance such as strainer cleaning, flange make up, gas cylinder replacement etc.
• Replenish process chemicals / additives and trigger re-stock when necessary.
• Review and issue permit to work after all safety checklist is completed and ready for maintenance activities.
• Conduct periodic fugitive emission leak detection (hydrocarbon) and execute immediate measures to minimize or eliminate leaks.
• Supervise contractors who are executing the approved works according to the established permit to work system.
• Undertake project related role when assigned; rotation between shift and day work.

The incumbent shall be part of the company’s Emergency Response Team (CERT) and perform any assigned roles and responsibilities such as but not limited to:

• Respond to terminal emergency situations as a first aid specialist or fire fighter or any other assigned roles.
• Participate in prevention and combat of hazardous situations such as loss of primary containment, oil spills and other forms of pollution and situations dangerous to life and property.
• Perform periodic safety check on work sites to ensure safety compliance enforcement such as but not limited to taking periodic gas test for confined space work.
• Perform routine safety check on all safety equipment such as safety showers, eye wash, SCBA (Self-Contained Breathing Apparatus), firefighting equipment etc. to ensure readiness and availability.

Work Experience

• Candidate must have at least 3 years’ experience in oil, petrochemical and refinery plant, utilities and cryogenic processes.
• Previous operations experience of LNG facilities is preferred but transferable skills from other hydrocarbon process or cryogenic product (e.g. LPG) loading and unloading will also be considered.
• Preferably with knowledge of plant instrumentation and control systems and DCS.
• Practical working knowledge of mechanical equipment, heat transfer equipment cryogenic equipment, centrifugal and reciprocating compressors, LNG tanks, fired equipment and flare systems.
• Experience in mechanical systems and process plants desired, knowledge of cryogenics and aspects of the natural gas industry is preferred.
• Experience in process plant safety (e.g. confined space, lock-out and tag-out, working at height, gas testing etc.) and permit to work issuing is preferred.
• Experience in plant commissioning and start-up is preferred.
• In addition, the successful candidate should possess the following personal attributes:

1. Work well in a team and with good listening skill
2. High self-motivation with the ability to work with minimal supervision and adapt to changing priorities and assignments.

Education

• NITEC certificate in Mechanical, Electrical or Chemical Engineering
• Candidates with Diploma in Mechanical, Electrical or Chemical Engineering will have an advantage.

Responsibilities:

- To perform job assignments by selecting, using and maintaining various service tools correctly.

- To perform installation of electrical switches, sensors, transducers, transmitters, current transformers, alternator components, control panels, etc.

- To perform installation of engine wiring as accordance with the drawings provided.

- To disassemble and assemble engine components i.e. oil pump, water pump and cylinder head, etc.

- To perform engine valve lash adjustment.

- To assist and perform mechanical works i.e. installation of radiator assembly, couplings, engines, alternators, gearbox, piping, hoses, etc.

- To assist and perform alignment works for radiator assembly, engine and alternator installation.

- To prepare generators for load test.

- To perform safety devices test and load test including the recording of the required parameter readings.

- To perform ET tool connection onto engine to view diagnostic codes and events and file date.

- To perform troubleshooting on engines and generators when problems arises.

- Knowledge of Hydraulic Staring System, Marine Gearbox, AC Power Alternator, alignment, control panel and testing will of advantage.

- To perform general servicing on engines and alternators.

- IT knowledge will be of advantage.

- Programmable Logic Control knowledge will be of advantage.

Requirements:

- Possess an ITE or equivalent.

- Minimum 5 years of relevant hands-on experience.

- Electrical hands-on experience is a must.

Job Description:

• Manage and supervise all activities related to laboratory testing, which includes maintaining laboratory equipment performance, developing operations, quality, and troubleshooting procedures;
• Ensuring staff compliance; certifying instrument performance; arranging equipment replacement, service, and repair
• Capable of conducting laboratory tests, interpreting test data and preparing reports and summaries, in which includes training and mentoring of lab sta, so that to be competent and comply with industry standards and safety regulations for handling and disposing of test samples
• Manage and supervise all activities related to any research related activities as may be assigned by Geonamics.
• Laboratory technician may also assist as site technician when laboratory work is slow.
• Perform basic geotechnical / soil laboratory testing based on standard methods
• Visually classifying soil samples, preparing samples and performing water content, particle-size distribution, Atterberg limits and compaction tests, etc.
• Any other Ad-hoc work as assigned.

Requirement:

• Bachelor's Degree in Civil Engineering, Geology, or other related engineering / science field
• Minimum 2 years working experiences in related field.
• Good written and communication skills.
• MS OFFICE

You may send your resume / CV to email address directly: [email protected]

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

We are an established company providing specialist hydraulics services to clients in the offshore, marine, oil & gas sectors, in Singapore and Overseas.

Our comprehensive range of products and services caters to all Hydraulic, Pneumatic, Electrical, and Mechanical needs in the Marine, Offshore Deck, Industrial, Civil Construction, Healthcare & Food Industries.

Some of the brands / clients we partner with include:

• Vestdavit Boat Handling Systems - Bergen, Norway
• Stanley Hydraulic Underwater Tools - USA
• T2 Alloy (Tungum Tubing) - UK
• Kinematics Manufacturing Incorporated For Winches - USA
• Repair & Service Works For Heila Cranes - Italy / Netherlands
• Vehicles Pto - Bezares, SPAIN
• Repair & Service For Rig Jacking System – Hydraquip Custom Systems Inc , USA
• Ibercisa Winches, SPAIN

Responsibilities:

• Perform mechanical overhaul and servicing of hydraulic machinery
• Participate in Testing and commissioning works
• Ensure workshop tools, and equipment are well-maintained

Requirements:

• Minimum 2 years’ relevant experience in mechanical servicing of marine offshore deck hydraulic equipment
• Positive work attitude
• Team player

We thank you for your interest.

We regret that only shortlisted applicants will be notified.

Position is open to Singaporeans only.

Reporting to the Manager of Engineering, the Technician will provide maintenance and engineering support in the manufacturing plant.

Our Manufacturing Operations teams are the people that make our products. We work in the manufacturing plants with a “Safety First, Quality Always” mindset striving for continuous improvement. We work in the local plant connected to our global manufacturing network to ensure the highest quality of raw materials, intermediates, and finished products.

WHAT YOU WILL DO

Your responsibilities will include but are not limited to:

• Performs scheduled calibrations and preventive maintenance on all types of industrial instruments and electrical devices and mechanical equipment.
• Executes work request from process plants for equipment, instruments and electrical breakdown.
• Operates and maintenance of utilities and facilities.
• Performs modifications, fabrication, fittings, and installation for minor projects.
• Performs equipment/system testing, commissioning and/or qualification (IQ, OQ, PQ).
• Performs basic trouble shooting of the PLC, BMS, EMS and FAs system.

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Min NITEC Diploma in Mechanical, Mechatronics, Electrical or instrumentation and control engineering
• Min 2 years' experience in maintenance field preferably from oil and gas or semiconductor industries
• PUB electrician license will be an advantage

This is a career conversion program under Workforce Singapore (WSG) and candidates must meet the following criteria and are open to the following conditions:

• Singaporeans/Singapore PRs only
• PMETs/Mid-Careerist with more than 2 years working experience
• Open to two years contract
• 12 hours rotating shift (day/night) including Sat/Sun. Shift allowance will be provided
• Work location Tuas (shuttle bus provided)

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Pharmaceutical Manufacturing.
• A state-of-the-art facility that delivers solution to its customers world-wide
• Highly engaging team that aims to innovate the future

About WKS Welding Products Pte Ltd

WKS WELDING PRODUCTS PTE LTD was established in 2006 as a subsidiary of WKS INDUSTRIAL GAS PTE LTD to complement and provide a more comprehensive scope of products and services to our customers.

Today, we have become one of Singapore's leading welding equipment suppliers. We are proud to be distributors of quality brands such as Lincoln Electric, Gentec, Oxford Alloys, Zeus, Golden Weld, Jasic, Atlantic, 3M Speedglas, Koike Sanso, Pegatec and have a wide range of welding equipment and consumables to suit your different needs.

Job Responsibilities:

• Troubleshooting and repair, service and maintenance of electrical equipment like welding machines.
• Troubleshooting and repair, service and maintenance of gas equipment.
• Provide advice to customers and work along sales team to conduct product demonstrations and commissioning.
• Perform general maintenance for production plant and equipment
• Ensure proper upkeeping of working environment
• Able to work extended hours when required

Requirements:

• Preferably with 'N' or 'O' level, Nitec and Diploma (Electrical / Electronics or relevant).
• Prior experience will be highly valued
• Good attitude and team player
• Able to perform some basic welding will be advantageous
• Possess Class 3 driving licence

Employer questions

Your application will include the following questions:

• What's your expected monthly basic salary?
• Which of the following statements best describes your right to work in Singapore?
• How many years' experience do you have as a Service Technician?

Job Responsibility

1. Responsible for sampling, inspection, testing and release of raw materials, in-process, and finished goods to ensure they meet technical specifications
2. Receive, label and store samples with relevant safety & hazard information
3. Review incoming Certificate Of Analysis compliance.
4. Maintains laboratory equipment and inventory levels for laboratory supplies and consumables for smooth operation of laboratory
5. Responsible for the accuracy, integrity and reliability of laboratory test results generated.
6. Performs regular maintenance and calibration of lab equipment to ensure product testing is validated
7. Execute all duties faithfully and responsibly in accordance to written procedures and to immediately report all observations of Quality and Safety non-conformances.
8. Ensure all activities are in continuous compliance with QEHSMS in designated areas of responsibilities.
9. Issue non conformity form to raw material suppliers for any non-compliance and ensure on-time closure of form.
10. Provide support and assistance in all internal & external audits.
11. Ensure the workplace 5S, safety and security compliance to safety regulations and company’s safety standards.
12. Perform and assume other duties and responsibilities as may be required by the QA Manager

Help with laboratory mechanical testing

Upkeep and servicing of mechanical testing equipment

Housekeeping of laboratory

Basic welding skills

Forklift licence

Basic understanding of pipefitting

Construction site, shipyard experiences added advantage

Young seniors, recently retired but still fit and able are welcome to apply

ALATAS Crane Services Worldwide is a worldwide operating crane & deck machinery service specialist and offers crane and hydraulic related services and parts supply in the Ship, Offshore, and Construction industry.

As a member of our projects department, and to support our filed service operations, we are employing

Marine / Port Crane Technician as follows:

JOB DESCRIPTION:

• Full time position based in Singapore at our client’s facility.
• Working alongside the maintenance engineer to conduct routine maintenance of rail mounted, rubber mounted and ship to shore cranes.
• The scope of work includes but not limited to:
  • Gearbox and hydraulic oil change out
  • Brake adjustment
  • Oil and air filter change out
  • Component greasing
  • Bolt torquing
  • Crane testing and commissioning
• Site specific and on the job training will be provided.

REQUIREMENTS:

• Minimum 1 years’ experience in similar role working with heavy machinery in ports, shipyards or heavy industry.
• Good knowledge and solid hands-on experience with front end maintenance of heavy machinery.
• Own transport to allow for travel to and from site.
• Willing to work as part of a team under the instruction of the maintenance engineer.
• Highly motivated individual
• Singaporeans Only

Job Types: Full-time, Permanent

Work Days: 5.5 days’ work a week

Job Summary:

· Salary details: $1,800 to $2,400

· Working Days and Hours:

2 days morning 2 days night 2 days off

o Morning Shift – 7.40am to 5.35pm

o Night Shift - 4.55pm – 1.45am

Job Location: 21 Loyang Cresent, Singapore 508985 (Safran Landing Systems office)

Transport: Company transport from specific pick-up location (both way)

Key Company Benefits: Completion Bonus, Medical Benefits

Job Responsibilities:

· Fault isolation to repair and restore System Equipment component to serviceable condition

· Receipt inspection and test of incoming System Equipment component to determine serviceability

· Perform Fault isolation, Repair, Assembly and Testing of System Equipment component in accordance with Component Maintenance Manuals.

· Perform regular checks on equipment and maintain them in good condition.

· Identify areas for improvement and participate in implementing solutions.

· Active participation in lean sigma & continuous improvement initiatives

· Active participation in 5S program

· Participate actively in contributing to HSE development and improvement.

· Any other duties as assigned.

Requirements

· NITEC or Diploma in Electrical/Electronic/Mechanical/Aerospace engineering or related disciplines

· Minimum 3 years in-depth knowledge in fault isolation to repair and restore component to serviceable condition [e.g. Brake Manifold Assembly, Servo Valve, Hydraulic Control Unit, Park Brake Selector Valve, etc.]

· Experience operating the Hydraulic Test Bench is advantages

· Manage work schedule and working to the production plan to meet customers’ expected datelines.

· Experience in an aviation environment or equivalent is advantages

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun
Registration Number: R23116696
EA Licence No.: 06C2859 (MCI Career Services Pte Ltd)

Roles & Responsibilities:

• Perform field service activities of mechanical engineering design and services related to fire & gas alarm
• Perform site survey, site installation & commissioning, and field services of VOC Analyzer, Autosampler, IP CCTV, Biometric System, Intrusion Alarm System etc.
• Provide effective Onsite/Remote Technical Support to diagnose and rectify technical issues.
• Respond and resolve customer issues in an accurate and timely manner.

Requirements:

• Minimum 2 years of relevant work experience
• Must be able to attend to field service jobs at Construction sites in Singapore
• Good IT and CCTV knowledge
• Good Mechanical Design knowledge for fire & gas system
• Advantage to possess Class 3 driving license

Office hour:

• Mon-Friday (8:30am to 5:30pm)
• Saturday (8:30am to 12:30pm)

Are you as excited as we are when we talk about the storage and distribution of bulk liquids at our state-of-the-art tank containers and terminals located in key markets? Could this be the scene for your next career move? We are currently recruiting for a Lead / Tank Heating Technician to join our Operations team.

Stolt Tank Containers (STC) is a leading provider of door-to-door transportation services for bulk- liquid chemicals and food-grade products. With a fleet of more than 45,000 tank containers, STC is the only operator with its own worldwide network of 22 owned and joint venture depots. Our culture champions digitalization, collaboration and continuous improvement, as well as a commitment to a sustainable future.

You will be joining a professional and international team with extensive knowledge of the industry. As part of our Operations team, you will provide your technical expertise and synergize effort for operations efficiency. Your expertise ensures that we will continue to set the industry benchmark for seamless and efficient operations.

Key Responsibilities

• Operate the boilers in the depot which include chemical dosage, pre-test of the boiler water and water softener dosage / treatment.
• Ensure boiler maintenance program is followed; liaise with contractors on servicing and repairs of the boiler and related equipment and accessories include returned lines, steam hoses / connections, steam returned lines, steam pressure control valves, water tank, etc and liaise with the Ministry of Labour Factory Inspectorate during annual inspection and feedback to the Operations Manager for action.
• Carry out steam heating in accordance to requirement with proper temperature reading and recording Samples to be collected and labeled. Both laden tanks and samples to be delivered timely and ensure to observe all safety precautions at work and meet OHSE management requirement.
• Observe no dark smoke emitted from the chimney and no chemical / oil / diesel leakage from drums, diesel storage tank or forklift truck.
• Assist to prepare tanks for cleaning.

Qualifications

• GCE 'O' Levels
• Required to have Class 2 Boiler Attendant certificate of competency. For Lead position, Class 1 Boiler Attendant certificate of competency is required.
• At least 1 to 2 years of working experience in the related field

What we offer

Join us and become part of a family-founded organization where your contribution counts.

• A full-time and permanent role
• Working Hours: Monday-Friday:
• First shift: 12.00am to 9.00am
• Second shift: 7.30am to 4.30pm
• Third shift: 3.00pm to 12.00am
• 5 days’ work week with rest day on Sundays
• A competitive compensation package, including a 13th month
• Good Flexible Medical Benefits for you and your family members

How to apply

• Complete the online application form and send it to us along with your CV
• Short-listed candidate, will be invited to attend interview at our depot

Got questions about the process? Contact [email protected].

About Stolt-Nielsen

Stolt Tankers is a division of Stolt-Nielsen Limited (SNL), focused on opportunities in logistics, distribution, and aquaculture. The Stolt-Nielsen portfolio consists of its three global bulk liquid and chemicals logistics businesses: Stolt Tankers, Stolthaven Terminals and Stolt Tank Containers – Stolt Sea Farm and investments in LNG. Stolt-Nielsen Limited is listed on the Oslo Stock Exchange (Oslo Børs: SNI). Our values: We act pragmatically, collaborate for success, commit to go further, and seek creative solutions.

Disclaimer for recruitment agencies

We don’t accept any unsolicited applications or CVs from recruitment and selection agencies.

Our client is one of the leading pharmaceutical ophthalmic solutions manufacturers in the world, dedicated to providing sterile pharmaceutical ophthalmologic solutions, from prevention to delivery of care at every touchpoint, advancing wellness in hospitals, clinics and home-care sectors.

Responsibilities:

• Responsible for machine operation, breakdowns, troubleshooting, preventive maintenance, equipment servicing, and routine daily servicing.
• Conduct daily for routine maintenance works that execute by engineering engineer or manager.
• Daily update and record machine checklist for machinery and utility equipment.
• Conduct weekly spare parts checking and update to superior.
• Daily cleaning of workshop area.
• Weekly assist to conduct air conditioning & cooling tower cleaning and checking.
• Weekly conduct cleanroom machine and automation equipment greasing and cleaning.

Requirements:

• Preferably at least NITEC in Electrical / Mechanical / Mechatronic Engineering/ Facility Management or related course
• Minimum 1-3 years relevant working experience in building/ facilities servicing and maintenance

How to Apply:

Interested candidates, please submit your updated resume by using Apply Now button

**We regret to inform that only shortlisted candidates will be informed.**

Tan Zhi Ning

Registration Number: R23116771

EA License No: 18C9027

1) Operate, set up, carry out preventive maintenances and servicing of pneumatic machinery.

2) Trouble shooting, repairing and maintenance of Automatic Assembly Machinery for One Touch Fittings.

3) Assist Supervisor to ensure good working condition of all machinery and equipment in the section.

4) General Housekeeping.

Roles:

Process Technician will be part of the Operations Team responsible for ensuring Operations processes run smoothly as per production plan. The incumbent is expected to be proficient in troubleshooting and resolving operations and process issues.

Responsibilities:

• Manage safe start up and shutdown of process/unit
• Ensure routine tasks and operations checklists are completed as scheduled
• Issue and close safe work permits and ensure work activities are carried out safely
• Ensure proper handover and takeover during shift change
• Participate in Environment, Safety, Health and Compliance programs

Requirements:

• Diploma with background in chemical or mechanical
• At least 2 years’ of relevant experience in a manufacturing/polymer plant
• Possess Class 1 or Class 2 local boiler attendant certification
• Strong interpersonal skills
• Proficient in Microsoft Office
• Good team player, with strong self-initiative
• Experience in DCS operations and controls
• Supervisory skills is advantageous
• Willing to perform 12hour rotating shift work

Ensure safe, smooth and uninterruptable plant operations.

Plant Operation

Support plant goals and objectives to achieve overall site KPI’s.

・Comply safety guidelines, SOP, policies and standards.

・Intergrade safety to all part of work and provide safety suggestions and improvements.

・Timely inform all unsafe activities, environmental release etc.

・Support shift activities includes but not limited to operation, frontline maintenance, plant start-up & shutdown and any other ad-hoc and urgent calls.

・Monitor and Operate Incinerators, boilers, turbine/generators and auxiliary systems includes but not limited to feed water treatment plant (Demin), compressed air system, fuel oil system, NH3 System, potable, rain and waste water systems etc.

・Perform shift logging and ensure equipment’s are operating within safe operating limits.

・Inform plant safety and other abnormal events timely.

・Involve in equipment/system isolation & normalization as part of plant activities.

・Respond to CCR alarms and perform frontline troubleshooting. Unresolved items raise maintenance notifications.

・Perform water sampling and ensure chemical injection system functionality as intended.

・Receive operation related chemicals, Lime, Fuel oil, NH3 etc.

・To assist operation & maintenance engineer in fulfilling their responsibilities.

・Carry out plant improvement activities.

・Maintain proper housekeeping as well as tidiness of work areas.

・To carry out any other duties as assigned by O&M Team.

・Oversee and handle maintenance activities as assigned during overhaul.

・Oversee and supervise external contractors.

Plant Optimization

· Identify safety improvement and implement energy & water saving initiatives.

· Assist maintenance team during maintenance.

· Monitor and keep track of utilities consumptions and generate reports as and when required

· Involve in Facilitate project works as well as plant improvement activities.

· Suggest and execute plant improvements initiatives.

Requirements

· NITEC / Diploma in Mechanical / Electrical / Industrial.

· Emergency Response Trained & First Aid trained.

· Confined space trained.

· Work at height trained.

Ensure safe, smooth and uninterruptable plant operations.

Plant Operation

Support plant goals and objectives to achieve overall site KPI’s.

・Comply safety guidelines, SOP, policies and standards.

・Intergrade safety to all part of work and provide safety suggestions and improvements.

・Timely inform all unsafe activities, environmental release etc.

・Support shift activities includes but not limited to operation, frontline maintenance, plant start-up & shutdown and any other ad-hoc and urgent calls.

・Monitor and Operate Incinerators, boilers, turbine/generators and auxiliary systems includes but not limited to feed water treatment plant (Demin), compressed air system, fuel oil system, NH3 System, potable, rain and waste water systems etc.

・Perform shift logging and ensure equipment’s are operating within safe operating limits.

・Inform plant safety and other abnormal events timely.

・Involve in equipment/system isolation & normalization as part of plant activities.

・Respond to CCR alarms and perform frontline troubleshooting. Unresolved items raise maintenance notifications.

・Perform water sampling and ensure chemical injection system functionality as intended.

・Receive operation related chemicals, Lime, Fuel oil, NH3 etc.

・To assist operation & maintenance engineer in fulfilling their responsibilities.

・Carry out plant improvement activities.

・Maintain proper housekeeping as well as tidiness of work areas.

・To carry out any other duties as assigned by O&M Team.

・Oversee and handle maintenance activities as assigned during overhaul.

・Oversee and supervise external contractors.

Plant Optimization

· Identify safety improvement and implement energy & water saving initiatives.

· Assist maintenance team during maintenance.

· Monitor and keep track of utilities consumptions and generate reports as and when required

· Involve in Facilitate project works as well as plant improvement activities.

· Suggest and execute plant improvements initiatives.

Requirements

· NITEC / Diploma in Mechanical / Electrical / Industrial.

· Emergency Response Trained & First Aid trained.

· Confined space trained.

· Work at height trained.

· Min. 5 years experience working in Waste to Energy plant.

• Conduct routine maintenance work (replacing fluids,lubricating parts etc.) aiming to vehicle functionality and longevity and repair work and report to workshop foreman for necessary technical assistance
• Inspect vehicle computer and electronic systems to repair, maintain and upgrade
• Inspect vehicle engine and mechanical/electrical components to diagnose issues accurately.
• Repair or replace broken or dysfunctional parts and fix issues (e.g. leaks)
• Has Experience in Automotive repairing, repair tyres,engine tune-ups, oil changes, gearbox repair, air-con & system diagnosis
• Any other ad-hoc duties as assigned

Jobs Requirements

• A minimum of 5 years’ experience in a similar role.
• Basic computer skills.
• Able to work independently and with a good working attitude
• Experienced/Responsible/Diligence.
• Strong team spirit.
• Able to work any shift
• Able to work on weekends and public holiday
• · Must be able to work night shift and split shift
• · Must be able to work extra hours or weekend if needed

Technician Responsibilities:

• Diagnose, troubleshoot and repair mobile devices;

• Quality control and testing of repaired devices to ensure full functionality. Resolve/manage customer inquiries;

• Able to interact positively with customers at the storefront and over the phone;

• Ability to multi-task between repairs and customer service;

• Other related duties as required;

• Maintain and use repair tools and equipment. Including software and in-store POS system to track repair tickets and inventory;

• Strategically plan the order of operations to ensure a successful repair;

• Provide estimates and quotes;

• Glass only replacement on Samsung and iPads;

• Microscopic Board work; component replacement Hand-solder SMT components,

• remove and replace thru-hole comp without board damage,

• solder wires and cables,

• Diagnosis, troubleshoot and repair mobile devices;

• identify assembly and documents issues;

• Repair logic board issues from water damage.

Requirements:

• Excellent knowledge of customer service best practice with previous experience;

• Ability to repair a variety of mobile devices (i.e., iPhone, Samsung, LG, Motorola, Sony, Huawei and OnePlus phone, and iPads.);

• Ability to communicate effectively with a wide variety of people in a professional manner, face to face, on the telephone and in writing;

• Knowledge of mobile devices including manufacturers, operating systems, and network service providers;

• Willing to work flexibly and with enthusiasm;

• Excellent organizational skills;

• Good attention to detail and ability to show initiative;

• Ability to demonstrate practical troubleshooting and problem analysis techniques;

• Ability to plan and prioritize your workload without supervision

• To conduct daily checks on essential building services and record meter readings for utility services;
• To operate Building Systems and record their performance data;
• To carry out general preventive maintenance on Building Systems, including troubleshooting, defects rectifications and performing repair works as assigned;
• To attend to In-house/Customers’ requests diligently;
• To attend to Contractors including providing access, conducting site walkabouts and assisting to monitor the performance of appointed contractors;
• To assist the immediate superior in the day-to-day operations of the Buildings;
• Good Hands-on/Handyman skills;
• To be part of the Company Emergency Response Team (CERT);
• Other ad-hoc duties as and when assigned

Responsible to set-up and operate CNC Machine Milling, Lathe

• Able to perform simple programming (For CNC machines only)

• Conduct first piece inspection

• Report to management in the event of non-conformance of components

• Adhere to good quality, housekeeping, and safety practices

• Perform 5S

Detailed

• Perform duties assigned by Engineering

• Check Routing Sheet details against drawings are correct before machining

• Maintain good housekeeping in the areas of work

• Always follow Company’s safe working practices and requirements

• Comply with safety measures and practices of the Company

• Report any unsafe conditions and practices to Production Superintendent or Engineering Assistant

• Ensure that a machining and inspection procedure is compiled to meet Quality Management System requirements and Quality Objectives

• Ensure adherence and compliance of the Quality Management System and achieve Quality Objectives

• Check raw material dimension before machining commencement

• Carry out the day-to-day machining operation in accordance with Routing Sheet and required date

• Perform 100% in-process inspection and recording inspection result

• Identity any non-conformance product and inform the problem to Production Superintendent or Engineering Assistant

• Check and report raw material defects / non-conformance before commencement

• Proper handling and usage of inspection devices and production machines/equipment

• Ensure job piece set-up and machining operation is in accordance with Routing Sheet and drawings

• Constant check on machining process and carry out in-process inspection to control the dimension according to customer requirements

• Maintenance and account for the inspection devices and tools issued for use

Requirements

• NTC 2 or 3 in Precision Engineering or equivalent

• Minimum 2 years of relevant experience

• Able to operate Fanuc Controller

• Experience in the machine applied for will be an added advantage

• Trainee positions available for interested parties without experience

• Able to read & interpret technical drawings

• Capable of using measuring instruments - Micrometre, Bore Gauge, Profile Projector

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

Job Descriptions:

• Carry out rectification and troubleshooting of plant and auxiliary equipment as assigned.
• Carry out routine checks and testing of plant equipment based on job requests in accordance with good maintenance practice.
• Do hands on planned maintenance such as but not limited to greasing and cleaning of equipment and machinery.
• Record details of maintenance and repairs works carried out.
• Maintain proper housekeeping as well as tidiness of the workplace.
• Manage documentation such as work procedures accordingly to plant standard SOPs and quality standard.
• To adhere strictly to all EHS rules and regulations imposed by the plant.
• Any ad-hoc tasks and duties assigned by supervisor / plant management.

Requirements:

• Minimum NITEC in Mechanical / Mechatronic Engineering or higher .
• Minimum 1 years’ experience in operation or manufacturing environment
• Good hands on experiences in rotation equipment repair such as pumps & agitators is an advantage
• Have initiative, good communication skills and able to take responsibility.
• Working knowledge of the principles and mechanics of plant equipment is essential
• Possess a basic welding skill will be an added advantages

Responsibilities:

(1) Perform routine maintenance/inspection and testing of the below equipment's and systems:

• Fire shutter systems
• Pressurization fan
• Fire alarm bell
• Fire alarm system and CPU
• Smoke detector, Heat detectors
• Highly sensitive smoke detection system
• Sprinkler system, hose reel system, FM200 System, Inergent system, Pre-action sprinkler system, Dry riser system
• Sprinkler pump, jockey pump, hose reel pumps

(2) Troubleshooting the control panel

(3) Attend during system breakdown and Identifying the problem, conduct proper diagnostic procedure and troubleshoot the system

(4) Provide support during system upgradation and installation of new systems and equipment's

(5) Maintain all the records of the inspected systems/ equipment's and report incase of any abnormalities

(6) Must be a team worker who provide support and make sure the member of the team are working together effectively.

Requirements:

* Nitec in Electrical Engineering or it's equivalent

* Minimum 1 year related working experience

* Must be a team worker who provide support and make sure the members of the tean are working together

effectively.

Intersted candidates please send your latest resume to "[email protected]"

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.