Our client, a dynamnic company in Real Estate industry is seeking for a Technician / Assistant Engineer ( ACMV ) - $3,200.00

Requirements

• Higer Nitec/Nitec in Mechnical or Electrical Engineering or Facility Management or relevant
• At least 2 years of experience Troubleshooting / Maintaining ACMV facilities of property
• Good communication
• Independent and team player

Others

• Salary up to $ 3,200.00

Interested candidate can send in your resume (word format prefer) to [email protected]

Monthly Salary: $2000 - $2400

(With fixed allowance - Transportation & Shift allowance)

Working Hours: 12 Hours Rotational Shift (8 am to 8 pm, 8 pm to 8 am)

Rotational Frequency: 2-3 months once rotational

Location: Jurong

Additional Benefits: AWS & Bonus

Transportation: Company bus provided. (pick up point either at Boon Lay or Jurong East MRT)

Roles & Responsibilities

• Supports in various tasks, including repacking and identifying unlabeled drums of waste chemicals
• Follows safety rules and practices 5S
• Adheres to QESH-MS Work Procedures and SOP
• Maintains cleanliness in the work area, takes care of equipment, and aids in the maintenance program and operation of production machinery and equipment.
• Loading and unloading of cargoes, conducts chemical waste sorting, manages waste transfer, and maintains stock records.

Requirements

• Possession of a NITEC in Chemical Engineering or its equivalent
• A minimum of 2 years of pertinent work experience in a manufacturing environment
• A clean disciplinary record
• Readiness to work without shift duties for at least 2 months
• Familiarity with ESH regulations

To submit your application:

Click 'Apply Now' or reach out to Jaslin at [email protected] via email. Please note that only candidates who have been shortlisted will be contacted for further correspondence. Wishing you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Poh Chew Leng, Jaslin | R22108798

Responsibilities:

• Executes instruction from QA Assurance Engineer on PPAP documents.
• Inspection on parts produced from new tooling, transfer tooling, modified tooling and repaired tooling.
• Perform Incoming, Inprocess, Outgoing inspection when necessary
• Feedback of problems, non-conforming specification relating to the product to immediate superior.

Requirements:

• GCE 'O''level and above with 1 year working experience in QA enviroment
• Able to use basic QC equipments (caliper, Micrometer, Height Gauge, etc)
• Able to understand and interpret drawing
• Knowledge in operate Smartscope / Quick Vision Scope

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang

Registration Number: R21102570

Workstone Pte Ltd

EA License Number: 19C9998

Enjoy free travel, health screening, flexible benefits and more!

Bus Technician can even get an additional sign-on bonus of $3,000^!

Monthly Gross Salary of up to $3,000* per month!

Responsibilities:

• To provide on-road recovery for breakdown buses
• Attend to all breakdown cases assigned and to drive the recovery vehicle
• Analyse & diagnose bus defect
• Handle mechanical, pneumatic and electrical repair of buses

Requirements:

• Higher Nitec / Nitec in Automotive Technology (Heavy Vehicle)
• At least 1-2 years of relevant experience in a similar industry
• MUST Possess minimum Class 3 Licence
• Knowledge of procedures on towing a breakdown bus
• Able to write and converse in English
• Able to perform shift duty

We regret that only shortlisted candidates will be notified.

*Salary includes allowances, incentives and overtime pay.

^ Terms & conditions apply.

Submitting this application for this position, you acknowledge that you have read the Data Protection Policy for Job Applicants (the “Policy”) of SBS Transit Ltd and its subsidiaries, affiliates and related corporations (‘SBST”) and consent to:

a. The collection, use and disclosure of your personal data by SBST for the purposes of your application and potential employment with SBST and the purposes set out in the Policy: and

b. SBST’s retention of your personal data for two years for consideration of future job opportunities (where applicable) from the date of submission of application.

Job Description

• Industry/ Organization Type: Chemical Manufacturing
• Position Title: Project Technician
• Working Location: Tuas
• Working Hours: Monday – Friday, 8.30 am – 5.30 pm
• Salary Package: Up to $2,500 + Transportation Allowance + AWS + VB (Up to 4 months)
• Duration: Permanent

Key Responsibilities

• Monitor project activities
• Report to Section manager/Department Manager
• Maintain and control project site and safety
• Verify project deliverables with site documents
• Report to Section Manager on site/safety deviations or issues on projects
• Attend/Conduct toolbox meeting
• Report and assist Section manager/Engineer in project deliverables
• Participate in department EHS activities
• Assist maintenance activities
• Prepare Purchase Requisition and update the cost summary as required
• Maintain project document filling and organize documents

APPLY NOW!!!

• Minimum Diploma or equivalent with at least 1 year of experience or knowledge in the Project Site of the chemical industry
• Proficient in Microsoft Office

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65965 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing (Aircraft / Aerospace)
• Position Title: Aircraft Technician (Airframe & Engine)
• Working Location: Seletar
• Working Hours: 5 days (Monday to Friday, 7.30 AM – 5 PM)
• Salary Package: Basic Salary up to $3,500 + OT + AWS + Variable Bonus + Laundry Allowance
• Duration: Permanent

Key Responsibilities

• Inspect and examine aircraft components for leaks, cracks, breaks or other issues.
• Read and utilize maintenance manuals, illustrated parts catalogues, service bulletins and other maintenance documents to troubleshoot and complete work assignments.
• Maintain, repair, and rebuild aircraft structures, functional components, and parts such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, gaskets, and seals.
• Perform routine maintenance operations, such as the replacement of equipment’s and aircraft components.
• Interpret specifications, or diagrams to inform installation, development or operation activities.
• Perform regular inspections to check for cracks, oil leaks, burned areas, foreign object damage, warping, distortions, missing segments and wear.
• Complete all tasks in the allotted time frame and to the quality standards of company.
• Promote safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines, and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns.
• Order supplies, equipment, materials and parts for repairs and general maintenance.
• Keep detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts.

APPLY NOW!!!

• Minimum ITE holder or Diploma in Aerospace Engineering or equivalent.
• At least 5 years of practical and documented aircraft maintenance experience.
• Experience on B737, A320, Fokker 100 & ATR would be an added advantage.
• Knowledge in Base Maintenance activities would be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65824 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing/ Chemical
• Position Title: Production Technician
• Working Location: Tuas
• Working Hours: Mon – Fri, 8.30 AM – 5.30 PM
• Salary Package: Up to $2,500 + Transport Allowance + Code of Conduct Allowance + Completion Bonus
• Duration: 1-year renewable contract

Key Responsibilities

• Report to Production Supervisor.
• Perform chemical filling, mixing, and polishing to meet quality and production targets.
• Conduct all instructed production tasks, from container prep and inspection to packaging, material handling, and barcode management.
• Follow QMS, EMS, OHS procedures, and record process data, ensuring operational parameters are met.
• Utilize hand-held and NAV operation equipment; perform basic maintenance and process improvements.
• Maintain cleanliness and safety in the production area, including strict PPE compliance.
• Complete additional tasks as directed by the Superior.

APPLY NOW!!!

• At least Nitec in any Engineering.
• Inexperienced candidates are welcome to apply as training will be provided.
• Able to work in cleanroom environment
• Well-versed with Microsoft Office.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65936 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Description

• Industry/ Organization Type: Manufacturing (Marine)
• Position Title: Service Technician / Maintenance Technician
• Working Location: Tuas
• Working Hours: 5.5 days (Mon – Fri, 8.30 am – 5.30 pm, Sat, 8.30 am – 12.30 pm)
• Salary Package: Basis up to $2,500 + AWS + OT + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Conduct routine service, maintenance, and repair of marine turbochargers
• Troubleshoot technical issues and provide timely solutions
• Ensure the equipment is in good operating condition after inspection, service and repair
• Follow according to the maintenance schedule
• Safety of all machines for production and quality
• Other general maintenance works

APPLY NOW!!!

• Physically fit
• At least 1 year of relevant work experience

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65946 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Telecommunication Services
• Position Title: Facilities Maintenance Technician
• Working Location: New Tech Park & Techlink
• Working Hours: Rotating 8-hour shifts (3 on + 3 off)
• Salary Package: Basic + Shift Allowance ($300) + AWS + Variable Bonus + Medical & Flexi Benefits
• Duration: Permanent

Key Responsibilities

• Responsible for the maintenance of building facilities services like electrical, mechanical, and facilities equipment.
• Responsible for minor work repair and rectification to building and equipment and defect rectification works.
• Responsible for conducting regular preventive maintenance programs for building equipment and services.
• Work with contractors and vendors to carry out schedules and supervise work on-premises to ensure quality cost-effective repairs.
• To provision engineering services on weekends, public holidays, or extended hours (if required).
• To standby 24 hours on duty roster (will provide additional standby allowance).

APPLY NOW!!!

• Minimum 1-year experience in facilities management or a similar role.
• Minimum ITE Certificate / Diploma in Mechanical Engineering, Electrical Engineering, and Facilities Management.
• Hands-on experience in Mechanical (ACMV) and Electrical maintenance, troubleshooting, and repair work.
• Able to perform shift work.
• Experience in critical environments (e.g. Data Centre / Cleanroom / Semi-conductor plant) is an added advantage.
• Good communication and teamwork.
• Proficient in MS Excel & Word.
• Good understanding of facility M&E systems.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #64875 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Pet Groomer / Grooming Technician

• Updated: 5 Weekdays & Half Weekenk (10am-5pm or 4pm - 11pm weekdays
  7pm - 11pm weekends )
• Near to Marymount / Upper Thomson MRT
• Budget $1,800 - $2,500
  *Trial required for this role !!*

Job Scopes:

• Bathing, conditioning, and drying pets.
• Trimming pets' nails, brushing their teeth, and cleaning their ears.
• Grooming and styling pets according to pet owners' instructions or standard grooming styles.
• Accommodating special requests that pet owners may have

Wong Ping Zhen Reg No: R22111012

The Supreme HR Advisory EA No: 14C7279

Our client is a Global MNC company in the Pharmaceuticals industry. Due to their current expansion plan, they are looking for a Production Technician to join their Production team, in hopes of developing the current high performing team. They are located in the West – easily accessible.

Note: This is a 1-year contract position, convertible.

Responsibilities:

• Responsible for overseeing/operating the company’s systems and equipment to meet the production requirements, ensuring adherence to the site’s safety standards and regulations
• Manage the necessary production materials, as well as other tasks such as cleaning and sterilization
• Handle the daily operations of the assigned manufacturing equipment
• Oversee strict compliance with the company’s HSE regulations, ensuring quality is being upheld
• Follow the company’s various SOP for proper material storage, as well as disposal of degraded/contaminated materials
• Record/Maintain data into the company’s inventory management system
• Execute the necessary cleaning and sterilization procedures when required
• Conducts calibration/pre-startup checks on the necessary equipment while following the company’s SOPs
• All other adhoc duties as assigned

Requirements:

• Minimum Nitec/Diploma in any relevant fields of Engineering
• Minimum 1 year of relevant working experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

RecruitPedia Pte Ltd

EA License No: 19C9682

EA Personnel No: R22104689 (Lim Yu Xun, Acer)

Our client is a Global MNC, one of the leading players in the Industrial Equipment sector. Due to business needs, they are now recruiting a Maintenance Technician to be part of their team for ongoing transformation projects. They are located in the West – easily accessible.

Responsibilities:

• Assess the various mechanical and hydraulic systems, troubleshooting issues, and devising effective solutions.
• Interpret technical drawings, detecting the relevant faults/issues, and executing the essential repairs
• Be knowledgeable about engine components, handling the operation/maintenance of the designated tools and equipment
• Undertake maintenance tasks on large machinery, including lifting heavy parts/components
• All other adhoc duties as assigned

Requirements:

• Minimum Higher Nitec/Diploma in the relevant fields of Engineering
• Minimum 1 year of relevant working experience (Maintenance of heavy industrial equipment/vehicles)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

RecruitPedia Pte Ltd

EA License No: 19C9682

EA Personnel No: R22104689 (Lim Yu Xun, Acer)

Job Description

• Industry/ Organization Type: Chemical Manufacturing
• Position Title: QC Technician
• Working Location: Tuas
• Working Hours: Monday – Friday, 8.30 am – 5.30 pm
• Salary Package: Up to $2,500 + Transportation Allowance + AWS + VB (Up to 4 months)
• Duration: Permanent

Key Responsibilities

• Report directly to the section engineer and/or designate
• Shall carry out all laboratory tests and measurements accurately in accordance with procedure and upkeep/maintain the instruments/facilities in good running conditions
• Shall prepare standards and reagents for analysis in accordance with procedure and ensure that all related documentation is maintained
• Shall perform basic maintenance and troubleshooting of instruments and write the maintenance report after troubleshooting/maintenance
• Shall handle ISO Documentation/Raw Data for QA Department
• Shall accurately update internal Statistical Process Control (SPC) charts and monitor the charts
• Shall assist in training staff for QC Section-related activities when required
• Shall maintain and check inventory of all storage samples and ensure all relevant records are maintained
• Shall perform receiving of QA department purchase and ensure that received items and all related documents are correct at the point of receipt
• Shall assist in audit preparation
• Shall support the QA Section in its activities as and when required
• Shall be involved in near-miss identification and provide work improvement (QEHS) suggestions
• Shall maintain the general upkeep and cleanliness of the laboratory and related areas by performing housekeeping
• Shall strictly adhere to all EHS/QMS procedures in all aspects of the activities and observe line discipline and 5S
• Shall perform any other tasks as instructed by the supervisor, engineer, QC section manager and HOD

APPLY NOW!!!

• At least a Diploma in Chemical or science discipline
• Experience with analytical instruments like ICP-MS, AAS, etc.
• Basic understanding of ISO9001, ISO14001 and OHSAS18001 standards will be an advantage
• Proficient in Microsoft Office Tools

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65938 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing/ Chemical
• Position Title: Production Maintenance Technician/ Chemical Process Technician
• Working Location: Tuas
• Working Hours: Mon – Fri, 8.30 AM – 5.30 PM
• Salary Package: Up to $2,500 + Transport Allowance + Code of Conduct Allowance + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Conduct hydrogen peroxide purification to meet targets and quality standards.
• Operate ammonium hydroxide mixing processes within set targets and quality norms.
• Manage operations including Ultra-Pure Water System maintenance, Waste-Water System upkeep and Utilities Equipment operations (Chillers, Water Tanks, Compressors, FFW, etc.)
• Troubleshoot and repair process equipment.
• Perform routine preventive maintenance on production items.
• Calibrate production instruments and equipment.
• Enhance process efficiency and operation lines.
• Compile and prepare progress and statistical reports using checksheets and datasheets.
• Inspect production areas and take corrective action as needed.
• Execute additional tasks as directed by superiors.

APPLY NOW!!!

• At least Nitec in any Engineering.
• Preferably with minimum 1 year of related experience. However, inexperienced candidates are welcome to apply as training will be provided.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65941 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

• Well Established Company
• Basic $1700 - $2000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas (Company Transport Provided)
• Working days: Monday to Friday
• Working hours: 8.15am – 5.45pm
• Training provided for those without/lesser experience

Job Responsibilities:

• To perform assembly work on Electrical panels
• Installation of electrical components & running of cables
• Carry out 5S in production floor & ensures daily working tools are well-maintained
• To read & interpret single line diagram
• Any other ad hoc duties as assigned

Job Requirements:

• Possess minimum GCE ‘O’ level / NITEC education in Electrical Engineering or equivalent qualification
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Industry/ Organization Type: Manufacturer (Cleaning Products)
• Position Title: Equipment Technician/Senior Equipment Technician
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $2700 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair & maintenance of cleaning equipment; e.g. road sweepers, ride-on auto-scrubbers etc.
• Must be able to perform troubleshooting on various electrical circuitry.
• Robot mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair.
• All other assigned duties.

APPLY NOW!!!

• Minimum Diploma (Electrical & Electronic Engineering or Mechatronics)
• Process Class 3 driving license will be advantageous
• 2-4 years of hands-on repair and maintenance experience

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65052 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

• MNC Company
• Basic $1800 - $2500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Clementi
• 12 Hours Shift

Job Responsibilities:

• Responding to intrusion alarm system activation, performing maintenance service, commissioning of alarm systems.
• Attending to customer request on alarm and card access systems and conducting patrols at night.
• Any others ad hoc duties as assigned

Job Requirements:

• Possess minimum Higher Nitec and/or Diploma in Electrical Engineering, Electronic & Computer Engineering, Mechanical Engineering, and other related fields with at least 1- 2 years of relevant experience
• Possess Class 3 Driving License will be an advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description:

• Address maintenance tasks assigned by Maintenance Engineers.
• Analyze process parameters, alarms, and information/drawings to identify and troubleshoot equipment issues.
• Carry out preventive maintenance to ensure the smooth and efficient operation of plant equipment and auxiliary systems.
• Conduct unit functional tests for the recommissioning of overhauled units.
• Take the lead in repairing or replacing faulty or malfunctioning components in machinery and equipment.
• Evaluate spare part needs, initiate purchase orders, document parts and materials usage, and review tender quotations.
• Coordinate logistical arrangements for all maintenance activities.
• Uphold a safe and organized work area through consistent housekeeping practices.
• Generate weekly activity reports.
• Fulfill additional duties as directed by supervisors.

Requirements:

• Nitec / Diploma in Electrical / Electronics Engineering or equivalent
• Preferably possesses 3 years' experience in Engineering or related field
• Self-driven, with good working attitude and a good team player

Interested applicants, please write in through CareersFuture with detailed resume in MS Words format.

EA License Number: 23C1730

Please Provide:

1) Availability

2) Current/ Expected salary

3) Reasons for leaving previous employments

We regret that only shortlisted candidates will be notified.

• Well Established Company
• Salary $2000 - $2800 + Incentives + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tai Seng
• Working hours: Normal Working Hours
• Training provided for those without/lesser experience

Job Responsibilities:

• To respond to service calls and service/repair banking equipment (banknotes/currency machines) & office equipment (shredders) based on SLAs
• To provide & ensure routine maintenance servicing (monthly/quarterly) of banking & office equipment
• Compliance with regulatory guidelines & requirements
• Any ad hoc duties as assigned

Job Requirements:

• Possess at least a Professional Certificate/ Nitec in Mechanical / Electrical Engineering or relevant qualification
• Possess Class 3 or Class 2B with own bike
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Manufacture of Electronic Security Systems Company

• Working location at Woodlands, Senoko

• Working hour: Monday - Friday (8am - 5pm) & Saturday (8am – 12pm)

• Variable Bonus + Excellent Welfare & Benefits

Job Scope

• Servicing, installation, testing and troubleshooting of electrical and mechanical parts at clients' premises or workshop.
• Access control, able to work under minimal supervision.
• Other task that assigns by the management.

Requirement

• NITEC / Professional Certificate in Electrical / Electronic / Mechanical or equivalent.
• 1 - 2 years of relevant working experience with CSOC is a plus
• Possess Class 3 License is an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

SIM BEI NA (R22111637)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Description

• Industry/ Organization Type: Manufacturing/Interior Design
• Position Title: CNC Technician/Operator
• Working Location: Changi South
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Responsible for setting up, tool selection, operating multi-axis CNC machining, Fiber Laser Machining and inputting the programs as designed.
• Ensure that the CNC machine & Fiber Laser Machine operates in a safe, controlled environment.
• Responsible for loading and setting up.
• Perform basic preventive & corrective maintenance of the machine.
• Maintain specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.
• Maintain equipment by completing preventive maintenance requirements; following manufacturer’s instructions; troubleshooting malfunctions; calling for repairs.
• Machine-related general tasks.

APPLY NOW!!!

• Minimum Nitec in Precision Engineering or related field.
• At least 4 years of related working experience.
• Computer literate, and familiar with WoodWOP, Pytha, Art- CAM, Jdpaint, Solidworks, AutoCAD.
• Knowledgeable in the operation of CNC Machines & Fiber Laser Machines.
• Familiarity with Homag CNC Machines is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65253 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Our client is a well-established MNC, market leader in the Industrial Servicing industry. They are looking for a Forklift Technician to assist their team for the next phase of their business. They are located in the West – easily accessible.

Responsibilities:

• Perform routine maintenance and servicing of various equipment
• Conduct diagnostic assessments/troubleshoot problems, and make the necessary repairs
• Liaise with the customers accordingly, addressing any machinery-related concerns
• Maintain the company’s service vehicle and designated workspaces
• Ensure that the various work tools/equipment are well-maintained and in good working order
• All other adhoc duties as assigned

Requirements:

• Minimum Higher Nitec/Diploma in any relevant fields of Engineering
• Minimum 1 year of relevant forklift maintenance experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

RecruitPedia Pte Ltd

EA License No: 19C9682

EA Personnel No: R22104689 (Lim Yu Xun, Acer)

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Technician (Electronics/ Electrical)
• Working Location: Serangoon North
• Working Hours: Monday to Friday, 8 am – 5.30 pm
• Salary Package: Up to $3,000 + Attendance Allowance + Transport Allowance + Bonus
• Duration: Permanent

Key Responsibilities

• Testing, tuning and troubleshooting PCA or products
• Produce output as per production target

APPLY NOW!!!

• Minimum Nitec in Electronics or its related discipline
• At least 1 year of relevant work experience in electronics manufacturing environment
• Able to perform soldering and tuning of PCA and products
• Able to troubleshoot PCA and products, read schematic diagram
• Able to use simple equipment to troubleshoot such as multimeter and oscilloscope
• Understanding of basic electronics and RF telecommunication

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65190 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

• Position : Service Technician (Engineer 1/ Electronics/Electrical /Microelectronics) - ALL WELCOME/ NO EXP REQ
• Location : KAKI BUKIT
• Working hours : 5 days work week; Monday - Friday, 830am to 500pm
• Salary (commensurate with experience) : Gross up to $3200 (Basic up to $2600 + Transportation Allowance ($500 without Car / $1200 with Car) + 14 days Annual leave add 1 day per year capped at 21 days
• Duration : Perm
• Industry : MANUFACTURE AND REPAIR OF SEMICONDUCTOR ASSEMBLY AND TESTING EQUIPMENT

Main Responsibilities:

• Service Engineers install, service, support, upgrade and maintain equipment. Training is provided to
• support multiple equipment types.
• To attend weekly meeting and presentation
• To write technical report
• To handle specific jigs during service jobs
• Assist senior colleagues to perform higher-level job like robot teaching & sub-units
• To perform 24x7 standby duties based on roster
• To perform ad-hoc shift work when needed when required.
• To perform ad-hoc delivery work

Requirements:

• NO EXPERIENCE WELCOME - Training Provided
• Diploma in Electronics/Electrical /Microelectronics Engineering. Might consider ITE with experience
• Cleanroom working experience preferable but not a must
• Machine setup/installation/modification/servicing/trouble shooting/repair
• Able to work irregular hours when required

Email your resume to [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Senior Consulting Manager (APAC)

EA No: 13C6684

Reg no.: R2197224

JOB SCOPE:

• Conduct testing and commissioning of the communications and control systems (CCTV system) for the project assigned
• Perform documentation, test plans and procedures
• Perform troubleshooting for Communication System
• Monitor and control project activities and schedule
• Coordinate with internal engineering department and client

REQUIREMENTS:

• NITEC / DIPLOMA in Electronics Engineering or any relevant engineering field
• With or without relevant experience welcome
• Basic Computer and Network knowledge

Please click "Apply Now" or send your resume to [email protected]/WhatsApp 80353296 if you are interested.