Job Responsibilities:

• Installation, termination and performing the electrical wiring for control panel, instruments and machine per drawing.
• Assembly and installation of the components and fittings.

Multinational corporation
Basic + AWS + Variable Bonus + Overtime
Good benefit & welfare including medical insurance

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Roles and Responsibilities

• To carry out all preventive and breakdown maintenance for all Aircon equipment.
• Ensure safe keeping of hand tools and maintain good housekeeping.
• Ensure all works are carried out safely and/or in accordance with safety procedures.
• Provide technical advice and assistance on all maintenance functions.
• Any other tasks, when required by the immediate superior.
• Prepare service reports after every completed job for customer’s endorsement.
• Communicate with clients with regards to problems in equipment and post-job reports.
• Any ad-hoc tasks given by supervisor or management.

Requirements

• With at least Nitec in Mechanical / Electrical / Electronic or related field
• Candidates with at least 2 years of related experience will be at advantage
• Candidates with technical knowledge in ACMV equipment, switchboard, generators, and experience in BMS (Building Management System) and BAS (Building Automation System) will be of added advantage
• Positive attitude, good interpersonal and customer-centric skills
• Only Singaporeans may apply

• Installation, inspects, maintainance, and repairs various types and brand of all types of commercial & residential air conditioners
• Performs regular preventive maintenance and corrective works on air conditioning system
• Carries out repair works such as replacement of air con compressor, fan coil motors etc
• Recommends appropriate repair and improvement works to customers
• Perform servicing of air conditioning at customers’ residential and commercial premises that includes chemical washes, chemical overhauls, general maintenance services
• Ensure all works compliance with appliance standards and Health and Safety Act
• Daily reporting and weekly reporting to direct manager
• Any other tasks, when required by the immediate supervisor

To carry out routine daily / weekly / monthly inspections on building equipments and systems

To carry out front line troubleshooting / retification on equipment fault and electrical tripping

To attend to customers, tenants or occupiers feedback / complaints

To keep track of spares and stocks inventory

To check on term contractors' work

1. Candidate must possess at least a Professional Certificate, Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic), Engineering (Industrial), Others or equivalent.
2. Required language(s): Preferably English and Mandarin spoken.
3. At least 6 Year(s) of working experience in the related field is required for this position.
4. Preferably specialist in Engineering - Electrical or equivalent.
5. Must have knowledge in Instruments and Electrical System for Process Control Environment
6. Knowledge and understanding of SCADA, DCS System, PLC, Instrumentation, Field Devices.

Job Scope:

1) Maintenance of Field Instruments for multiple Process Plants.

2) Troubleshooting and problem solving for field Instruments.

3) Calibration and commissioning of field Instruments.

4) Electrical equipment troubleshooting and general maintenance for the process plant.

Position: Service Technician

Responsibilities:

1. Service & Maintenance of fitness equipment

2. Repair & Trouble-shooting service

3. Assembling & Dismantling of fitness equipment

4. Handle warranty claim & parts ordering

Requirements:

1. Minimum Nitec / Higher Nitec in Mechanical engineering related discipline. Electronics and electrical knowledge or experience preferred.

2. 3-5 years of working experience, fitness industry experience is bonus.

3. Possess class 2B and/or class 3 driving licence and own transport preferred.

4. Initiative and willing to learn.

5. Experience in customer relationship management.

6. Dedication to providing great customer service.

Salary Package:

$2200-2700 (Basic Salary+ Monthly transportation allowance + Incentive)

Equipped with company mobile phone

Medical Claim

Free light refreshment & drinks in company pantry area

Free Parking

Annual Company trip (Oversea)

Annual wage supplement and annual bonus

Responsibilities:

• Conduct maintenance and repair tasks on CCTV systems installed in buses

• troubleshoot and diagnose issues with CCTV equipment

• Repair or replace faulty components as needed to ensure proper functionality

• Perform routine inspections and preventive maintenance on CCTV systems

• Record and maintain accurate documentation of repair activities

• Follow safety protocols and guidelines while working in various environments

• Maintain cleanliness and organization of work areas and equipment

• Meet the KPI set by the department

Additional Information:

• Diploma or Electric Certification

• Ability to enter data accurately in Excel or similar software

• Strong multitasking skills with the ability to prioritize tasks effectively

• Basic knowledge of electronics and CCTV systems

• Ability to work independently and as part of a team

• Willingness to work night shifts as required by job demands

5 work days per week

7pm - 4am

8pm - 5am

Mars Veterinary Health (MVH) is a global leading provider of high-quality, advanced veterinary care for companion animals. Our business offers a wide range of high-quality medical services covering preventive and basic health care as well as advanced diagnostics, internal medicine, intensive care, surgery and orthopaedics. MVH also provides rehabilitation, physiotherapy, dietary advice and offers selected pet food, pharmaceutical and care products.

Working together to improve the lives of veterinary professionals, pets and clients.

Our vacancies are at VES Hospital, Mount Pleasant Veterinary Group (of clinics), Hillside Veterinary Surgery and Gentle Oak Veterinary Cinic.

We invite you to join us as Veterinary Technician if you like to work with a team of passionate individuals seeking to provide exceptional care to pets in a challenging and dynamic environment.

Do you have:

• Graduate(d) with Diploma in Veterinary Technology or relevant education.
• Minimally 2 years work experience in veterinary clinic or hospital preferred.
• Could commit to 44 hours work week based on rotation inclusive of weekends.
• Want to grow a career in veterinary industry.

Responsibilities:

• Lead communications with veterinarians and veterinary medical team to maintain the flow of pets.
• Provide professional, efficient and exceptional service at all times.
• Obtain relevant information and history from clients to maintain proper and complete medical charts.
• Ensure the safety of pets, clients and associates by utilizing safe restraining techniques, following standard protocols while maintaining clean, sterile and organized treatment areas, exams rooms and labs.
• Educate clients about preventive care, pet health needs, any diagnosis or treatment, hospital services and other related matters.
• Assist with surgery as applicable.
• Do note that only shortlisted candidates will be notified.

Benefits:

• 14 days of annual leave per year. Prorated based on join date.
• Variable bonus.
• Meal allowance.
• Annual health screening.
• Dental reimbursement.
• Hospitalisation insurance.
• Specialist treatment coverage.
• Annual allocated training hours for each employee.

Responsibilities:

• To adhere to prevailing Company SOPs including service KPIs.
• To carry out indoor and outdoor service jobs (commission, repair, troubleshoot, inspection, modification, warranty checks).
• To investigate customer complaints (product defects, failures or non-conformance) and recommend solutions.
• To issue customer outdoor and indoor service reports.
• To disassemble cancelled units for stock return.
• To provide service and maintenance training sessions on product usage for customers.
• To perform routine maintenance and repair work on inverters and gear motors.
• To report discrepancies if any.

Requirements:

• ITE (Mechanical Engineering) with 1 year of relevant work experience.
• Basic proficiency in English (both written and spoken) is mandatory.

Work Conditions:

• Must be comfortable working outdoors in order to repair and service inverters and gear motors.
• Must be willing to be on standby for after office hours for service activiation, with OT payment.
• Must be willing to commute to clients' site for servicing. Transport reimbursement is provided for commute between the office and client sites.
• Work-at-height is required at some clients' sites.
• Must be open to occasional overseas work on adhoc activation basis.

• Operate CNC machine/s to perform tasks
• Understand specifications of the task at hand and the desired result
• Prepare and load raw materials and parts onto the machines
• Prepare a test run to check if the machines produce outputs according to specifications
• Set machines to complete full cycles to fabricate large number of parts
• Supervise the machines while they execute the tasks and make any necessary adjustments to produce a better result
• Inspect and measure finished products and compare them with requirements to determine if the process has been completed properly
• Check and maintain and upkeep machinery daily to ensure functionality

Requirements

• At least 5 yrs experience in CNC operating
• Skill in operating CNC machinery and tooling as well as precision measurement tools
• Ability to read and interpret mechanical documents and drawings
• Computer savvy with basic understanding of computer programming and CAD/CAM
• Mechanical aptitude and good math skills
• A keen eye for detail and results-driven approach
• Good communication abilities
• Willing to work night shift and split shift
• Willing to work OT on public holiday and weekend
• · Must be able to work night shift and split shift
• · Must be able to work extra hours or weekend if needed

Are you our next associate at Mount Pleasant (MP)?

You will be joining a team of passionate individuals seeking to provide exceptional care to pets in a challenging and dynamic environment.

We invite you to join us as a Veterinary Technician.

Connect with us at [email protected] if you

• Graduate(d) with Diploma in Veterinary Technology or relevant education.
• Minimally 2 years work experience in veterinary clinic or hospital preferred.
• Could commit to 44 hours work week based on rotation inclusive of weekends.
• Want to grow a career in veterinary industry.

We have vacancies across our clinics located at MP Clementi, MP East, MP Farrer, MP Jalan Gelenggang, MP Mandai and MP North.

Element has an opportunity for a Civil Technician for testing, sample preparation and delivery/collection of samples and preparation of test reports. You should ideally have considerable experience in construction material testing either with a commercial test house or contractor.

This position will be based in Sungei Kadut Loop,Singapore.

Job Duties:

• Perform soil, concrete and aggregate testing
• Conduct density test
• Sampling of concrete for compression and flexural test
• Conduct slump testing and asphalt testing
• Prepare and compile reports

Job Requirements:

• Diploma / degree in Civils with at least 2 year experience in similar role
• Good communication skills and ability to work in teams and to work under pressure
• Possess good working attitude & able to adapt quickly
• Work independently and follow through on assignments with minimal direction

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]. Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

The LEW Technician ensures that facilities are safe and functional by performing preventive and corrective maintenance activities. He/She conducts technical troubleshooting for mechanical and electrical issues in compliance with the quality and safety standards, regulations and organizational Workplace Safety and Health (WSH) practices.

Roles and Responsibilities:

• Perform daily operational activities which includes attending to customers' enquiries, needs and complaints
• Perform preventive and breakdown technical support and maintenance for mechanical/electrical services, plumbing & sanitary services, Aircon servicing and maintenance, ACMV systems, chillers, and electrical control
• Ensure all LEW paperwork/documentations are completed and filed in accordance to regulatory standards.

Requirements

• Possess LEW certificate with EMA or hold a valid Licensed Electrical Worker (LEW) certification of Grade 7
• Nitec in Mechanical / Electrical or related field
• Candidates with 2 years or more related experience in Facilities Management will be an added advantage
• No experience is welcome to apply (on Job Training)
• Positive attitude, good interpersonal and customer-centric skills
• Rotating Shift required (2 shifts and/or 3 shifts)
• Only Singaporeans may apply

Key responsibilities

· Test and troubleshoot instruments, components and assemblies using appropriate Test equipment.

· Test electrical equipment or systems to ensure proper functioning.

· Carry out Avionic Modifications including new wiring installations.

· Complete all tasks in the allotted time frame and to the quality standards of our company.

· Promote safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines, and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns.

· Keep records of maintenance and repair work. Maintain repair or maintenance records.

· Order supplies, equipment, materials and parts for repairs and general maintenance.

· Keep detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts.

· Carry out schedule servicing, and troubleshooting and defect rectification.

· Carry our good housekeeping and observe all Health and Safety Procedure.

· Any Ad-hoc assignment as assigned by Supervisor or Managers

Qualification / Expertise / Skills

• Minimum NITEC / Higher Nitec , Diploma in Aerospace Electronics / Aerospace Avionics.
• At least 2 years of experiences practical and documented aircraft maintenance experience.
• Those with experience on any of the following types; Fokker 100, ATR, E190 or B737,A320 would be an added advantage.
• Knowledge in Base Maintenance activities would be an added advantage.

Element has an opportunity for NDT Technician to join our rapidly expanding team. The ideal candidate will have hands-on experience in Phased Array Ultrasonic Testing (PAUT) and be proficient in various conventional NDT methods including Magnetic Particle Inspection (MPI), Dye Penetrant (DP), and Radiographic Testing (RT). This role involves fieldwork and requires a commitment to safety, quality, and continuous improvement.

This role will be based in Jalan Boon Lay, Singapore.

Job Duties:

• Perform Non-Destructive Testing (NDT) using PAUT, MPI, DP, and RT methods in accordance with industry standards and client specifications and conduct thorough inspections and interpret test results to identify any defects or irregularities
• Prepare and maintain detailed inspection reports and documentation and ensure all testing equipment is calibrated and in proper working condition
• Comply with all safety regulations and protocols while conducting fieldwork and collaborate with team members and clients to provide accurate and timely testing services
• Participate in training and development programs to enhance technical skills and knowledge
• Assist in the development and implementation of NDT procedures and techniques

Job Requirements:

• Certification as an NDT Technician Level 2 in PAUT, MPI, DP, and RT
• Proven experience in conducting PAUT in a field setting
• Strong understanding of NDT principles, techniques, and equipment
• Ability to interpret and analyze inspection results accurately
• Strong attention to detail and commitment to quality
• Ability to work independently and as part of a team

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job Responsibilities

• Perform preventive maintenance activities with the objective of ensuring equipment capabilities are stabilized and optimized through continuous improvement and cost reduction within the limits of cost permitted and department policies and objectives.
• React to error/alarm messages of manufacturing equipment.
• Perform equipment health check and troubleshooting.
• Prepare the procedure/OCAP or report regarding to machine issues.
• Identify and address potential areas for improvement and optimize tool availability, cycle time, utilization, and cost.
• Actively participate in continuous improvement project, to upkeep line equipment.
• Work as the proxy tool owner to manage the tool performance and meet the KPI requirement.
• Understand and follow all health, safety, and environmental procedures and requirements.
• Support on safety, ISO & 5S audit.

Spare Parts

• Assist in the management and upkeep of equipment spares and inventory system.

Training

• Assist Engineers in staff training, such as maintenance training, prepare training materials, cross training of zone members, updating and reporting.

Safety, Housekeeping, Discipline & Others

• Perform the activities (5S, workplace safety and occupational hazards) to ensure conformance of safety instructions and promote good housekeeping, organization, and manufacturing practices.
• Ensure good housekeeping, plant work discipline, ESD and safety awareness at all times.
• Execute Ad Hoc task instructed by supervisor / manager.

Others

• Carry out effective planning for corrective and preventive measures to maintain high equipment reliability and process stability with minimal resource requirements.

Job Requirements

• Diploma/Certificate in Electrical/Electronics/Mechanical/Mechatronics Engineering or equivalent
• At least 3-year of work experience in the semiconductor industry
• Able to perform swing shift (work in weekend) schedule, including working in a cleanroom environment.
• Able to work well with minimal supervision and ability to prioritize tasks and follow specific procedures.
• Strong technical skills and knowledge of semiconductor process tools
• Good communication skills and follow up with tool vendor for issue troubleshooting and solution.
• Experienced in repair and maintain a variety of Lithography exposure, coater, developer, bonder, scrubber tools.
• Able to use MS office.
• Able to read and write PLC (Programming Logic Control) will be an added advantage.
• Able to read FDC charts and use Power Bi will be an added advantage.
• Strong teamwork, able to work well with a global team and other duties as assigned.

Roles & Responsibilities:

1. Repair & Service Commercial Chiller & Freezer & Other Kitchen Equipment

2. Familiar with Copper Welding

3. Assist in Goods Delivery & Stock-Taking

Job Requirements:

1. Min O-Level or Equivalent

2. Able to Communicate in Basic English & Mandarin

3. From Monday to Fri (9AM to 6PM) & Sat (9AM to 1PM)

4. Possess Class 3 Driving Licence

Corporate Benefits:

1. Basic Salary + Overtime + Allowance + CPF (For Local)

2. Annual Bonuses (For Full-Year Employee Only)

3. Annual Increment

4. Medical Benefits

5. Annual Leave + Complimentary Leave (For Confirmed Employee Only)

6. On The Job & External Training Provided

7. WICA Insurance

8. Good Career Prospects

Refer to our corporate website: www.singmahsteel.com

or our Facebook page: https://www.facebook.com/singmahsteelrfg

for more details on our corporate profile and description.

本公司诚意聘请有兴趣的求职者，请联系我们

Job Scope for Electrical Technician

Position Overview:

An Electrical Technician is responsible for the installation, maintenance, repair, and troubleshooting of electrical systems and equipment in various settings. The role requires a strong understanding of electrical theory, wiring diagrams, safety protocols, and technical troubleshooting skills.

Key Responsibilities:

• Install electrical wiring & lighting
• Knowledge to troubleshoot, circuit breakers, fuses, and electrical panels.
• Perform inspections of electrical systems and components and rectification work
• Follow strict safety procedures and protocols.
• Practise lockout/tagout procedures to safely isolate electrical power.
• Maintain accurate records of electrical inspections, repairs, and maintenance activities.

Education and Certifications:

• High school diploma or equivalent; technical or vocational training in electrical technology preferred.

About the Company

Casa Creation is the authorized distributor for SK Magic, one of the world’s most advanced home appliance makers originating from Korea. Combining sleek design, effortless use, and amazing health benefits, we believe that our SK Magic product range - particularly state of the art water and air purifiers - are the fast-rising appliances of the future in today’s hectic yet discerning society.

Vision:

Creating a clean and safe living environment, through the pursuit of fundamental health care

Core Values:

1. Health: We believe in creating a clean and safe environment, through the pursuit of fundamental health care
2. Eco-Friendliness: Our products reduce resource consumption, minimise pollution and reduces the production-use-disposal process.
3. Convenience: We aim to minimise labour for all our customers, creating a seamless experience and curating our products to suit each of your needs.

Responsibilities:

• Install company water purifiers on-site, including set up of parts, troubleshooting, and quality checks.
• Perform routine maintenance, such as inspecting parts, checking, and replacing filters.
• Perform repair works as necessary.

Skills Required:

• Minimum 1 year experience in plumbing or related technician work.
• Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
• Customer oriented with positive work attitude.

Other Requirements:

• Possess a valid Class 3/3A driving license.
• Able to work 5.5 days a week.

About the Company

Casa Creation is the authorized distributor for SK Magic, one of the world’s most advanced home appliance makers originating from Korea. Combining sleek design, effortless use, and amazing health benefits, we believe that our SK Magic product range - particularly state of the art water and air purifiers - are the fast-rising appliances of the future in today’s hectic yet discerning society.

Vision

Creating a clean and safe living environment, through the pursuit of fundamental health care

Core Values

1. Health: We believe in creating a clean and safe environment, through the pursuit of fundamental
   health care
2. Eco-Friendliness: Our products reduce resource consumption, minimise pollution and reduces the production-use-disposal process.
3. Convenience: We aim to minimise labour for all our customers, creating a seamless experience and curating our products to suit each of your needs.

Responsibilities

• Install company water purifiers on-site, including set up of parts, troubleshooting, and quality checks.
• Perform routine maintenance, such as inspecting parts, checking, and replacing filters.
• Perform repair works as necessary.

Skills Required

• Minimum 1 year experience in plumbing or related technician work.
• Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
• Customer oriented with positive work attitude.

Other Requirements

• Possess a valid Class 3/3A driving license.
• Able to work 5.5 days a week.

A*STAR Infectious Diseases Labs (A*STAR ID Labs) is seeking for a Research Officer to join us in our mission to be a leading centre of infectious diseases research. A*STAR ID Labs aims to develop a cohesive A*STAR response to drive and deliver translational infectious diseases research to better health and economic outcomes.

The laboratory headed by Dr. Marco Vignuzzi is leading cutting-edge virology and antiviral and vaccine therapies. We are seeking a motivated and fast learner to participate in projects involving the development of RNA therapeutics.

Job Description:

• Produce and assay RNA using techniques such as in vitro transcription, qPCR, and next generation sequencing
• Perform molecular biology assays such as molecular cloning and Western blots
• Perform irological assays in cell culture for a wide variety of RNA pathogens, including chikungunya virus, Zika virus, dengue viruses, enteroviruses
• Perform meticulous recordkeeping and draft reports and presentations to collaborators
• Oversee daily laboratory activities and help manage the lab’s routine admin duties
• Help new students and postdocs settle into the lab, transfer techniques to them, and participate in their research
• Ensure safe technical practices and procedures

Job Requirements

• Bachelor Degree in Biomedical Sciences, Biochemistry, Life Sciences, Biological Sciences, Infectious Diseases, Microbiology, Immunology, or related field
• At least 3 years wet lab experience and relevant experience in molecular biology and in cell culture
• Experience with RNA techniques (RNA extraction, qPCR, next generation sequencing, northern blotting) is preferred
• General lab skills in molecular biology (cloning, PCR)
• Highly motivated and able to work independently and multitask
• Team player with good interpersonal skills
• Good spoken and written communication skills
• A strong desire to constantly learn and acquire new skills

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Local well-established manufacturing company
• Basic Up to $2600 (depends on experience)
• Permanent role with 14 days A/L+ AWS+ Bonus+ Increments
• Location: Ang Mo Kio
• Mon – Fri / 9am - 6pm **Work-life balance
• **On-job training provided
• **Friendly working environment

Responsibilities:

• Inspection of incoming raw materials, in-process & final product quality control
• Perform lab tests
• cGMP & ISO documentation
• Manage licenses renewal

Requirements:

• 0-2 years experience
• With Diploma in Chemistry related field

For consideration, kindly submit your CV by clicking “APPLY Now” or email to mtc007@mtcconsulting.com.sg

**Only shortlisted candidate would be notified**

Teo Hui Yee R22105757

• Monitor Product Quality Compliance
• Perform routine and non-standard tests on materials, products and other Quality Control purposes using HPLC, GC, Empower system etc
• Identify OOS, deviations and quality problems
• Report testing activities and results
• Comply with Quality and HSE procedures when carrying out sampling and QC tests
• Manage Laboratory Operations
• Follow the organization’s operational excellence model for laboratory work
• Perform routine calibration and maintenance of laboratory equipment
• Report equipment OOS issues and equipment purchase requests
• Maintain integrity, accuracy and completeness of QC data and records
• Optimise quality and efficiency of department workflows and activities
• Assist in preparing and participate for laboratory inspections and audits
• Compile data to support business and performance metrics reporting
• Propose solutions to improve QC procedures, activities and workflows

Requirements

• Min NITEC / Diploma in chemistry / chemical engineering / Chemical process Tech
• Min 1 year of HPLC lab working experience

Mon to Sun - Any 5 days. 2 rotating shifts

Based at Tuas - bus pickups - Jurong East, Outram, CCK, Woodlands

Pharma MNC

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The National Cybersecurity R&D Laboratory (NCL) is a shared national infrastructure that provides computing resources, repeatable and controllable experimentation environments, as well as application services for the cybersecurity R&D community. The infrastructure includes a cluster of 300 nodes that provides a wide range of provisioning mechanisms, security data and security services. NCL aims to provide a platform that fosters and encourages collaboration among researchers in academia, the industry as well as government bodies both locally and internationally through the sharing and validation of research outcomes. The laboratory was established in November 2015 and is funded by the National Research Foundation (NRF).

Job Description:

• Design and manage cloud-based computing system and network infrastructure
• Work on Security with AI, focusing on leveraging LLM for security applications
• Help to oversee our progress of our grants

Qualifications

• PhD in Computer Science or relevant
• Interest and experienced in looking for expertises in cloud security, applied cryptography, adversarial machine learning, etc
• Enthusiasm for problem-solving and able to work in a fast-paced environment
• Strong interpersonal skills with the ability to communicate effectively

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are looking for a QC Lab Subject Matter Expert (SME) responsible for the precise setup and loading of master data into gLIMS, in compliance with global guidelines and data principles. This role is vital to maintaining data integrity and developing local support frameworks for continuous data management.

Key Responsibilities

• Execute local master data setup and loading in accordance with global guidelines and data principles.
• Populate the global LIMS system with all required initial master data, including consumables, sampling plans, specifications, parameter lists, test methods, and LES templates.
• Perform local data cleansing to ensure the quality and accuracy of the data.
• Create local work instructions to outline the implementation of global processes at the site level.
• Potential opportunity to transition into a permanent position within the local LIMS Office, offering continuous master data support.

Required Qualifications

• Experience in data management and familiarity with master data setup and loading processes.
• Strong attention to detail and analytical skills to ensure data accuracy and quality.
• Ability to develop clear and concise local work instructions.
• Knowledge of QC lab operations and related data requirements.
• Proficiency in using LIMS or similar data management system.

Why join us?

• Generous Leave Policy including Elderly Care Leave to care for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions? If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.