About Us:

RevUp Auto is a trusted and well-established auto repair shop, dedicated to providing top-notch vehicle service. We pride ourselves on delivering high-quality repairs, excellent customer service, and a supportive work environment. As we continue to grow, we are looking for a skilled and passionate Automotive Technician to join our team.

Job Description:

We are seeking an experienced and detail-oriented Automotive Technician to perform diagnostic, maintenance, and repair work on vehicles. The ideal candidate will have a strong understanding of vehicle systems, excellent problem-solving skills, and a commitment to delivering the highest quality service.

Key Responsibilities:

• Perform diagnostics and troubleshooting on various car systems (engine, transmission, electrical, suspension, etc.)
• Conduct routine maintenance such as oil changes, brake inspections, tire rotations, etc.
• Inspect and repair or replace faulty parts using diagnostic tools and equipment.
• Maintain accurate records of repairs, parts used, and time spent on each job.
• Communicate clearly with customers regarding their vehicle’s needs and recommend additional services if necessary.
• Ensure work area is clean and follows all safety protocols.
• Stay current with the latest industry trends, tools, and technologies.

Qualifications:

• Proven experience as an automotive technician or mechanic (2-3 years preferred).
• Strong knowledge of automotive repair and maintenance procedures.
• Ability to use diagnostic tools and equipment effectively.
• Excellent problem-solving and troubleshooting skills.
• Ability to work independently as well as part of a team.
• Valid calss 2B & 3C license with a clean driving record.
• Strong communication skills and customer service orientation.

Benefits:

• Competitive salary based on experience.
• Opportunities for advancement and additional training.
• Annual Leave and Medical Allowance
• Staff Uniform

How to Apply:

Please submit your resume and a brief cover letter to [email protected]. We look forward to hearing from you!

Job Description

• Install, repair, test & commission cable systems (voice/data/fiber optics);
• Prepare/install cable pathways & supports where needed;
• Assist in the preparation of tools & materials used for daily work assignments;
• Troubleshoot cabling system issues & perform repairs & maintenance;
• Assist co-workers with installation & routine maintenance of structured cabling systems;
• Ensure quality, health/safety standards & report issues, if any;
• Any other duties as assigned.

Requirements:

• Minimum NITEC (Electrical Engineering/Electrical Technology/Built Environment) or work- related experience
• Good communication & team work skills
• Flexibility & willingness to work night shifts occasionally (as jobs require)

Responsibilities

• Setup, operate and maintain all types of conventional or CNC machines such as Milling, Lathe, Surface Grinding, Shaping, Hobbing, broaching and conventional machines in the cell/process.
• Setup, operate and maintain all measuring equipment, gages and fixtures for making accurate inspection checks.
• Perform simple troubleshooting of machines.
• Able to read and interpret blueprints.
• Maintain pertinent records; Shop-paper and work in accordance to technical instructions and drawings.
• Work in an orderly manner and keeping work areas, benches and machinery in a tidy and clean condition after used.
• Notify the Supervisor timely for any machine or tooling problems which could jeopardize product quality or infringe safe work conditions.
• Engage in any other activities or responsibilities as requested by the Supervisor

Requirements

• NITEC /Higher NITEC in Precision Engineering or equivalent.
• At least 2 years working experience in a Precision Engineering environment.
• Basic command of written and spoken English.
• Able to work weekly rotating shifts

Copier Technician Job Responsibilities:

• Maintain & hands-on repair/service any brand of copier machines / printers.
• Conduct quality inspection upon stock arrival.
• Conduct product testing with samples provided on copier machines / printers.
• Provide technical advice and report on quality of samples / products.
• Resolve customer complaint for faulty product at customer’s premises when required.
• File and maintain samples sent for testing or faulty items etc.
• Any other tasks as assigned.

Copier Technician Job Requirements:

• Minimum 'O'/ 'N' Level & Above.
• Must have at least 2 years of experience in repairing copier machines.
• Prior experience with servicing Ricoh, Canon, Toshiba,Konica Minolta, Xerox, Kyocera copier/printers will be an advantage.
• Familiar with copier/printer software applications, install and testing network connectivity on site.

· Able to start work immediately or with short notice.

· Working location: Pioneer (15 Pioneer Walk, Pioneer Hub, Singapore 627753)

We are seeking a highly skilled and motivated Hotel Maintenance Technician to join our team and ensure the smooth functioning of our hotel properties. You will play a crucial role in maintaining the hotel's facilities to the highest standards and ensuring the safety and comfort of our guests and staff.

Job Description

Perform repairs & general maintenance work on various systems, including (but not limited to) M&E, plumbing & sanitary, air-conditioning, electrical/lighting, painting, and carpentry.

Troubleshoot issues and implement effective solutions.

Ensure compliance with building and fire safety regulations.

Follow established maintenance strategies and company policies for a safe environment.

Coordinate with other departments for smooth operations.

Communicate effectively with supervisors and colleagues regarding maintenance statu and issues.

Qualifications and Skills:

1 to 2 years of relevant working experiences in facilities & building maintenance.

ITE NITEC / Higher NITEC / GCE 'N' / 'O' Level / Diploma

Preferably to have hospitality background

A team player and the ability to work during weekends and on public holidays.

Maintenance Technician

Responsibilities

• Servicing and repairing industrial cleaning equipment such as high-pressure jet, leaf blower, scrubbing machine, vacuum cleaner, battery operated cart and etc
• Inspecting and assessing the functionality of equipment
• Troubleshooting machineries breakdowns
• Conducting routine maintenance and safety checks
• Preparation and submission of maintenance reports
• Liaise with external vendors for necessary equipment repair
• Inspect and monitor quality standards of equipment / tools
• Perform asset tagging to ensure accountability of equipment
• Prepare inspection finding reports and communicate with internal staff / vendors on any faults, and follow up to ensure rectification
• Any ad-hoc assignments

Requirements

• Valid Singapore Class 3 Driving Licence
• Minimum 2 years of experience in similar capacity and relevant knowledge in electrical and mechanical.
• Good communication and organisational skills
• Basic computer and report writing skills.
• Good time management and planning skills
• Hands-On Physical work required
• Driving company lorry (manual)
• Working hours: 8am to 8pm (Monday to Saturday)

Responsibilities:

• Report to Facility Engineer, and system ownership on operation and maintenance pertaining to 100K clean room, centralized air conditioning, Industrial exhaust, process utilities, DI water system, vacuum system, compress air system, process cooling water system, and other miscellaneous facilities systems for Semiconductor Test factory.
• Ensure continuous supply of utilities and related facilities at the required performance level or specifications.
• Perform continuous improvement of facilities equipment key performance indicators such as % availability, mean time to repair (MTTR) and mean time between failure (MTBF).
• Record all repair, services, maintenance procedures and processes.
• Ensure compliance with ISO standards and support audit functions.
• Ensure safety requirement is strictly followed and all vendors must meet our safety expectation before commencement of work.
• Perform preventive maintenance procedures to reduce facilities equipment failures.
• Provide urgent/ad-hoc support for troubleshooting facilities equipment, even during off-office hours, so as to achieve continuous running of the facilities.
• Perform cost-reduction initiatives while still maintaining quality and productivity.
• Provide job assistance and conduct job trainings for employees as needed.
• Any additional tasks as assigned by the manager or management.

Requirements:

• Minimum Diploma in Engineering or equivalent
• 1 to 2 years of experience in facilities & maintenance, repair or servicing of Semiconductor testing facilities equipment.
• Experienced Facility Technician or Field Service Technician who is highly effective working in a team-oriented matrix organization.
• Must have proven skills effective problem solving, troubleshooting and root cause failure analysis, on facilities management.
• Able to demonstrate good communication, organizational, analytical and interpersonal skills
• Experience in either a Semiconductor Final Testing Environment or Manufacturing industry
• Willing to work in Cleanroom environment
• Able to perform a 8 hours rotating shifts(Both day & night shift), or
• Able to perform a 12 hours rotating shifts(Both day & night shift), when business needs.

The aircon technician will be involved in the maintenance, repair, and installation of different types of air conditioning systems. Aircon Technician will be involved in performing general maintenance services in households and offices all across Singapore, including washing aircon, diagnosing and rectifying issues in all brands and types of aircon, and installing and dismantling aircon. This role has the following responsibilities:
- Dismantle malfunctioning systems and replace worn out or defective parts.
- Perform chemical washes and chemical overhauls.
- Perform repair and maintenance on malfunctioning air conditioners.
- Perform general maintenance services on normally-functioning air conditioners.
- Prepare service reports after every completed job.
- Keep a record of job schedules.
- Pick up and deliver required materials and supplies as and when required.
- Communicate with clients with regards to problems in equipment and post-job reports.
- Perform any ad-hoc tasks given by supervisor or management.
This role requires the following skills
- Possess a CLASS 3 DRIVING LICENSE.
- Must be a confident driver and have experience driving medium-large-sized vans.
- Minimum 5 years experience working as an air conditioner technician performing chemical wash, general servicing, repairs, and installation.
- Experience working in CENTRALISED AIRCON SYSTEM maintenance is a big advantage.
- Confident at carrying out repairs and cleaning on all common aircon brands for wall-mounted, ceiling, casement, ducted, and portable aircon in Singapore including Daikin, Panasonic, Samsung, Mitsubishi Electric, Heavy Industries, Fujitsu, Toshiba, Carrier, and Europace.
- Able to speak and write basic English (excellent English is a strong advantage)
- Knowledge of electrical wiring.
- Able to do some heavy lifting and climbing.

- Willing to work on weekend shift

Location: Mandai

Carry out daily production activities that includes:-

• Feed-in of raw material or recycle product
• Packing of products
• Operate equipment and machinery to meet daily production target
• Ensure that quality and output is met
• Check and inspect production machinery or equipment
• Perform preventive maintenance and carry out basic repair
• Operate forklift to retrieve raw material and stack product from and into the warehouse respectively
• Update production record and activities
• Ensure that all production activities are carried out in accordance with Work Instruction (WI).
• Maintain good housekeeping of the production area
• Adhere to safety procedures and regulations

Job Requirements:

- O Level or S.P.M qualification

- Must be able to lift heavy objects < 25kg

- On-job training will be provided

We are looking for a service technician responsible for installing, maintaining, and repairing equipment.

Job Description

• Maintenance and service of cleaning machines & robots
• Repair of machines
• Submission of monthly report
• Liaise with equipment suppliers
• Any ad-hoc assignment

Job Requirement

• Ability to work independently or as part of a team.
• Previous experience as a service technician or in a related field.
• Hands-on experience in installation, maintenance, and repair of equipment or systems.
• Good organizational and time management skills to handle multiple tasks.
• Adherence to workplace safety standards and protocols.

Other Requirements

• Working Hours: 800am to 530pm (Mon – Fri, Alternate Saturday)
• Work Location: East (Must be able to work in the EAST)

• Grow, maintain and transplant flowers, shrubs and trees
• Maintenance and installation of sprinkler systems
• Construct walkways, walls and small foot bridges
• Follows plans and specifications, inspects and directs the planting of landscape material associated with improvement, beautification, and erosion control
• Create and adhere to various watering and feeding schedules
• Plan new growth planting patterns in distinct seasonal changes
• Identify detrimental insects or plant disease and eliminate them
• Ability to adhere to a predetermined budget
• Operate a variety of mechanical equipment
• If certified or under the supervision of a certified applicator will apply chemicals

Requirement

• Primary/Secondary/’O’ Level Education with relevant landscape gardening experience.
• With WSQ Landscape Operation (Entry Level) Certification will be an advantage.
• No age limit with ability to work outdoors.
• Physically fit to handle tools and move around easily during work.

Working Hours and Office Location:

· 5.5-day work week

· Office location: Mandai Estate

· Work location: Various Sites

Job Location at Ubi

1. Perform first article inspection.

2. Prepare and update FAI report.

3. Review 2D product design drawing for measurement issues.

4. Review and discuss with supplier to fabricate measuring jig & fixtures.

5. Ensure and maintain measuring equipment/instrument are calibrated and well controlled.

6. Review FAI report together with project engineer.

7. Ensure all measuring equipments are well maintained.

JOB DUTIES

• Work in a team on scheduled projects.
• Support local and overseas project/attachment.
• Overseas project attachment and support up to 12 months.
• Report to Team Leader/Supervisor
• Install, de-install, relocation and preventive maintenance of semiconductor equipment.
• Commissioning/decommissioning of semiconductor equipment.
• Weekly Service Report update
• Monthly Progress Report assessment

EDUCATIONAL QUALIFICATIONS

Possesses Diploma or above in Engineering or a related field

CRITICAL SKILLS/KNOWLEDGE

On-the-job training by OEM for the first two months

WORKING EXPERIENCE

At least 2 or more years experience working in semiconductor industry.

PERSONALITY TRAITS

• Team worker
• Industrious
• Proactive
• Positive mindset
• Disciplined
• Physically fit

OTHER ABILITIES/APTITUDES

• Ready-to-go for overseas job attachment/support up to 12 months.
• Work at different sites depending on the project.
• Monthly online team meeting on a Saturday morning

BENEFITS/INCENTIVES

• 5 days work week
• 14 days annual leave
• Additional 1 day annual leave every 2 years with the company, up to 20 days

Transport allowance upon probation completion

1. $600 for car owners
2. $300 for other modes of transport including public transport

Requirements:

· Candidate must possess at least NITEC/Higher NITEC in Mechanical/Electrical Engineering.

· Experience in Material Handling/ Automation/ Conveyor systems would be an Advantage.

· Able to read & understand Electrical Drawings or has PLC Controlled Systems Knowledge would be an Advantage.

· Proficient in MS Word and Excel

· Entry Level candidates is welcome to apply as Training will be provided.

Job Description:

· Perform Equipment Maintenance works according to Manufacturer’s Maintenance Instruction/Work Procedure and approved maintenance checklists.

· Carry out minor repair work as part of Preventive Maintenance work.

· Assist Supervisor during major repair work.

· To carry out ad-hoc duties assigned by Superiors.

Benefits:

· 5-day Work Week

· Annual performance bonus and year end AWS

· Medical and Dental Insurance (including family members)

Location:

· Changi Airfreight Centre / other Contracts assigned location.

Please email Resume to: [email protected]

Primary Roles & Responsibilities

The patching cabling between network equipment and client’s network

The installation of power cables from equipment to power supply in rack/cabinet/closet

The installation, troubleshooting and de-installing IT equipment (Servers / Network /

Storage / etc)

o Install/swap out devices (e.g., phone, computers, cables, boards, edge routers, switches and etc.)

Complete all hard and complex Move, Add Change (MAC) requests within the defined service levels

Act as interface between client’s associates and management

Provide hardware break-fix services for network infrastructure

Perform onsite call-through, data, voice, website and security testing

Perform back-up testing to ensure all systems are connected to the client’s network as directed

Support carrier testing of circuits

Assist with facilities efforts such as vendor coordination and vendor supervision

o Power and uninterruptable power supply (UPS) restoral

o Water problems,

o Emergency cooling restoration,

o Fire suppression exercises, restoration, and post fire events

Support inventory management activities

o Receiving inventory

o Tagging of assets

o Tracking spares (crash kits)

o Ordering inventory

o Updating inventory records

o Prepare and return damaged equipment

Act as an interface, as needed, between associates at the applicable location and centralized project / operations / MAC management

Requirements:

Must be proficient in utilizing technical tools such as BERT testers, cable testers, and fiber testers.

Requires experience in working in communications closets

o Must be able to perform rack and stack activities

Must be able to safely lift heavy objects

o Must understand cable patching processes and procedures in copper and fiber

o Experience in either or both CommScope and Corning structured cables (copper and fiber)

o Must have a basic knowledge of data communications networking.

Must be able to assist in troubleshooting issues

Must understand network terminology

Requires good interpersonal communications skills

o Must be able to explain technical issues in a way the client will understand an

issue

o Must be able to interpret a client’s issue in a way that will allow technician to facilitate a resolution

Education/Experience Requirements

• 5+ years of experience in Data Centre operations and environment
• Must have a basic knowledge of local and wide area networking.
• High school Diploma or equivalent required

EA License no: 96C4864

Reg No: R23115903

We are looking for a reliable, resourceful Building Technician who works independently with who can lead the Team.

• Ownership and responsibilities of assigned system & program
• Risk assessment, and test to meet factory standards
• Share and provide generous training to team members
• Respond to system failure escalation calls
• Supervise shutdowns
• Rectify system faults and restore the system back
• Collaborate daily with operation team
• Experience in system trouble shooting
• Skills in handling meeting
• Identifying system faults and root causes
• Fluent spoken and written English

Job Description

• Responsible for performing a variety of duties within a manufacturing environment.
• Duties related to production, kitting, packaging, shipping and receiving, and inventory control:
• Follow assembly and packaging work instructions to exact details and be able to understand and follow written and verbal instructions in English, typically related to safety, quality, and manufacturing processes
• Work efficiently on-line where tasks vary as different models move through the assembly process and demonstrate excellent understanding of daily priorities to meet expectations of internal and external customers.
• Duties may be related to installation, repair and support of manufacturing equipment.
• Involving inspections of raw materials and in-process and/or finished products to ensure compliance with Agilent’s quality and reliability standards.
• Maintain a clean and organized work area.

Qualifications

• Nitec / Higher Nitec / Diploma in Mechanical Engineering, Electrical Engineering or its equivalent
• Minimum1 to 3 years of experience in a Manufacturing environment
• Basic Microsoft Office skills (Word, Excel).
• SAP, MES experiences preferred

Job Description & Requirements

Perform inspection including the use of gages and equipments and document quality paperwork meeting the Engineering Print, Job Instruction Sheets and/or the QMS Instructions. To support all CORE, EH&S and Continuous Improvement activities.

Roles and Responsibilities

• Perform job inspection at first piece, in process and final inspection per the Job Instructions Sheet plans.
• Perform First Article Inspection (FAI) and Delta FAI per AS9102 requirements.
• Perform dimensional inspection using a variety of inspection gages & equipment.
• Initiate Quality Notification (QN) for non-conformance when products are not meeting Quality and Engineering requirement.
• Perform proper use and maintenance of gages and inspection equipment.
• Perform proper documentation including inspection stamping of quality paperwork.
• Maintain and improve 5S standards on workstations and responsible areas.
• Good communication and interpersonal skill and ability to communicate with all levels.
• Adhere to company EH&S policies and guidelines.
• Adhere to company Quality Policy.

Qualification and Education Requirements

• Minimum Education required (specific field or equivalent):
• NITEC qualification in Precision/Mechanical Engineering or higher.
• Minimum years of experience in role: At least 2 years of working experience in a quality control environment.

Preferred Skills (if any):

• Able to interpret basic technical (GD&T) drawings.
• Proficient in using hand gages; micrometer, dial indicator, height gage etc.
• Good command of written and spoken English.
• Basic operating knowledge of Co-Ordinate Measuring Machine (CMM) inspection; Carl Zeiss / Wenzel CMM.
• General proficiency of Microsoft Excel and Microsoft Word (SAP a plus).
• Non Destructive Testing (NDT) method in MPI Level 2 will be an added advantage.
• Able to perform weekly rotating shifts.

Working Location: Bedok South

ALG is currently hiring NDT Technicians for our internationally renowned airline client based in Singapore. This role will be on a long-term contract with option extension and a chance for permanent role conversion should you excel.

Job Responsibilities:

• Assist NDT and BSI Authorisation Holders to perform NDT and BSI inspections on aircraft structures and components/parts/engines/APUs.
• Carrying out and certifying inspections in the NDT method specified in their authorization where applicable
• Maintain good housekeeping, documentation, equipment, and tools to ensure compliance with airworthiness standards
• Maintain a high level of situational awareness and by fully compliant in all matters related to general safety and personal safety as guided by company and industrial practices
• Ensure validity of calibration of all inspection and test equipment before use
• Conduct regular checks on chemical expiry and maintain its records
• Carry out any other duties as assigned by Engineering Supervisor (NDT).

Job Requirements:

• Ideally has 1 - 2 years of Aerospace experience and possess NAS 410/ EN 4179 Level I certification on FPI. Other FPI Level 1 certificates can be considered if the candidate can demonstrate his proficiency.
• Able to perform rotating day and night shift.
• Able to effectively utilize lifting devices.
• Fresh entry level candidate preferably with educational qualification in Aviation can be considered.

If you are interested in this role, please APPLY NOW! Please note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R23113794

· Adhere to all Singapore safety standards, rules and regulations as well as group

legislative safety requirements while executing tasks.

· Perform routine and non-routine preventive maintenance activities in one or more

designated work areas.

· Assist in necessary troubleshooting on machines and equipment (motors, bucket

elevators, pneumatic gate valve, solenoid valves, air slides, mechanical/rotating

parts and so on) as and when required.

· Assist in shipment receiving activities and ensure timely completion

· Assist in monthly physical stock check/count as assigned by superior.

· Assist in cement sampling and testing activities during every shipment.

· Assist in maintaining the general housekeeping of the plant at desired level.

· Assist in installation of new assets, equipment and machineries

· Assist in updating and up keeping the maintenance checklist.

· Assist in all other plant/operations related works as assigned by Superior.Qualifications

· NTC / Nitec / Diploma in Mechanical / Electrical Engineering or similar technical certification from a reputable institute.

· Able to read basic schematic drawings or circuit diagram. (added advantage)

· Relevant working experience. Hands-on knowledge on welding, cutting and so on will be an added advantage. · Knowledge in Microsoft Office. (added advantage)

· Able to work in a shift when required

• To work in accordance wtih company policies, production plan, product specifications and management guidance
• Operate and monitor machinery which distillate, filter, separate, heat or refine chemicals, to blend,mix, process a wide range of chemical products
• Handover and takeover of plant status, routine check on plant, ensure all bleeders and vents are close
• Console technician to handover and takeover of plant status face to face at control room, check on MOS, screen through all pages for abnormality and check status of fire panel
• Report any leaks, deviation, and abnormality and unsafe conditions in the plant to Team Leader
• Perform process start-up, normal operation and shut-down in accordance to work instructions, ensure no deviation on process and safety
• Monitor processes, taking samples and performing routine chemical and physical tests of products and recording production data. Ensure products are meeting product specifications
• Line up for tank transfer and monitor transfer of products in conformance with safety procedures
• Logistic operation (Loading/unloading ISO tankers, road trucks, drumming, etc)
• Troubleshooting of equipment malfunctions, carrying out routine operating verification tests, filter cleaning, minor piping/spool connection/disconnect and request for maintenance if needed
• Prepare equipment for maintenance, LOTO, check for leaks and gas test, De LOTO, AFTT, test run and put equipment back in service
• Assess the area or equipment before signing the permit assessor portion
• Respond to process upsets, leaks and emergency situations (as ERT team member)
• To support maintenance activities/other departments/shifts on shortage of manpower
• Monitor, report and intervene any unsafe conditions and situations
• Raise concern on MOS, safety critical equipment and MOC/PSSR as required
• Other duties as assigned
• Good team worker, good communication skills, safety/process knowledge and troubleshooting skills are prerequisites
• Work 12-hour shifts and be physically fit
• NITEC in Chemical Process Technology with 1 to 5 years of working experience in Chemical/Pharmaceutical, Oil and Gas manufacturing industries
• Good understanding in general EHS practices
• Fluent in English (written and verbal)
• Candidates need to be trustworthy, hands-on, take full ownership/responsibility of their roles and responsibilities. Can-do attitude, flexible approach and provding full support to the Site Management team are key.

Job Highlight

• Basic Salary + High Commission + Variable Performance Bonus (earn up to $4000)
• 5 days/6 days work week
• Medical Benefits, Insurance Coverage
• Staff Purchase Discounts

Responsibilities:

• Attend to customer request and enquiries on Computer Components / Repair Service / PC Customisation
• Recommend the ideal Computer Components to customer according to their individual preference through knowledge sharing
• Maintain good relationship with customers to build customer loyalty
• Basic housekeeping of work area
• Assist in retail operations, e.g. stock take
• May be required to be involved in Trade Fair and related events

Knowledge & Skills:

• Possess good communication & interpersonal skills and is a team player
• Presentable disposition & well-groomed
• Retail sales target achievement
• Customer relationship management – maintain and create new customer profile
• Ensure inventory management for individual counter
• Ensure excellent customer service is given to the customers (e.g. product knowledge)

• Salary up to $4000
• Mon- Sat 9am to 6pm
• Training provided.

Job Description:

• Repairing vehicle issues such as engine, transmission, brakes, steering, and electrical systems
• Performing routine maintenance on vehicles, including oil changes, filter replacements, and tire rotations
• Performing safety and emissions inspections
• Replacing parts such as belts, hoses, and spark plugs
• Utilizing diagnostic tools and equipment to assess vehicle performance
• Maintaining and updating service records and documentation

Job Requirement:

• At least 1-2 yearof experience in related field
• Able to work under minimum supervision
• Strong team player & problem solver.

Working Location: Paya Lebar.

For direct apply please WA: 80748186

Job Responsibilities:

· Perform daily operational activities which includes attending to customers' enquiries, needs and complaints

· Perform preventive and breakdown technical support and maintenance for mechanical/electrical services, plumbing & sanitary services, Aircon servicing and maintenance, ACMV systems, chillers, and electrical control

· Ensure all LEW paperwork/documentations are completed and filed in accordance with regulatory standards

Requirements:

· Possess LEW certificate with EMA or hold a valid Licensed Electrical Worker (LEW) certification of Grade 7

· Nitec in Mechanical / Electrical or related field

· Candidates with 2 years or more related experience in Facilities Management will be an added advantage

· No experience is welcome to apply (On Job Training)

· Rotating Shift required (2 shifts and/or 3 shifts)

We would like to invite interested applicants to apply.

Thomas Tan

Registration No: 12C6253

License No: R2094900

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

About the role

As a BMW Service Technician at Eurokars Auto Pte Ltd, you will play a crucial role in maintaining and repairing the premium vehicles in our care. This is a full-time position based in our Redhill location in the Central Region, where you will put your expertise and passion for automobiles to work in delivering exceptional customer service.

What you'll be doing

• Performing scheduled maintenance and service on BMW vehicles according to manufacturer specifications
• Diagnosing and troubleshooting complex mechanical and electrical issues
• Repairing and replacing parts as needed to restore vehicles to optimal performance
• Communicating effectively with customers to explain work carried out and provide recommendations
• Verification of vehicle functions and its subsystems
• Maintaining detailed records of all work performed
• Adhering to all safety protocols and procedures

What we're looking for

• Formal qualifications in automotive repair or a relevant trade certificate
• At least 1 years of experience as a vehicle service technician or equivalent
• Strong knowledge of BMW vehicle systems and diagnostics
• Excellent attention to detail and problem-solving skills
• Effective communication and customer service abilities
• A genuine passion for the automotive industry and keeping up with the latest technologies