• Installs, inspects, maintains, and repairs various types and brand of all types of commercial & residential air conditioners
• Performs regular preventive maintenance and corrective works on air conditioning system
• Diagnoses electrical and mechanical defects and malfunctions
• Carries out repair works such as replacement of air con compressor, fan coil motors etc
• Recommends appropriate repair and improvement works to customers
• Perform servicing of air conditioning at customers’ residential and commercial premises that includes chemical washes, chemical overhauls, general maintenance services
• Ensure all works compliance with appliance standards and Health and Safety Act
• Daily reporting and weekly reporting to direct manager
• Any other tasks, when required by the immediate supervisor

Requirements:

• Hands-on experience in installation, maintenance (including chemical washing), troubleshooting and repairing of air conditioners
• Must be able to handle physical work due to job nature
• Basic command of English, spoken and written
• Responsible for providing air conditioning (air conditioning system) services, such as inspection,maintenance, installation, air conditioning failure
• Provide monthly maintenance and operation services to customers
• Effective handling of fault / emergency repairs and customer complaints
• Singapore Class 3 driving license
• Minimum 3 years’ experience is required
• 6 days’ work week (Monday to Saturday 9am to 6pm)
• Company is willing to sponsor Work pass if required
• Preferably with a certification BCA License (Air-Con License) - INSTALLATION OF STRUCTURALSUPPORTS FOR AIR-CON UNITS or equivalent
• Knowledge in SCDF Safety Requirements for the handling of R32 gas - CoC in Installation &Commissioning Air-conditioning Systems (R32 Split Unit) will be a bonus

• Title: Product Application Laboratory (PAL) Leader, SEC
• Industry: Chemistry, Equipment & Analytical Control Tools Manufacturer
• Working Hours : 5 Days, 9 am – 5:45 pm
• Office at Gul Circle (Shuttle Service at Pioneer & Joo Koon MRT)
• Salary: $7500 - $8000
• DEPARTMENT : PRODUCT APPLICATION LAB

About the company: A privately held, global company with a belief in innovation and employee empowerment. With over 1000 employees worldwide, a global supplier of specialty chemicals, custom finishing equipment, engineered powders, and analytical control systems to the electronic component, printed circuit board, semiconductor, industrial finishing and decorative industries.

Requirement

• The role may require regular travel to Malaysia, Vietnam, Philippines, and Thailand (1-2 times per month) & less frequent travel to France and the US (1-2 times per year)
• Qualifications: Graduate degree (Masters or PhD) in Chemistry or Chemical Engineering
• Experience: 10 Years of experience in Semiconductor Wafer Processing industries

Job Description

This role will be responsible for our Product Application Lab for Semiconductor applications. Working closely with the Sales team and global technical resources, the selected candidate will support the development and growth of Semiconductor industry products in the region, focused on Southeast Asia.

The initial focus will be on Strip, Etch, and Clean (SEC) solutions, but will also grow to include the Elevate® line of electroplating products. Duties will include:

• Having a deep understanding of Technic products for the Semiconductor industry,
• Keeping abreast of industry developments and market position/performance of comparable competitive products.
• Working with Sales team to select appropriate customer and application targets
• Visiting customers across the territory to understand their equipment, process, and product performance requirements.
• Starting-up and operating the Technic Wafer Processing and Failure Analysis lab
• Conducting product functional performance testing & measurements either on-site or coordinating with other Regions to generate test results remotely.
• Advising on laboratory upgrades needed to better serve customers
• Liaising with customers during qualification tests and providing trouble-shooting advice after installation
• Recommending the best product for the application based on product experience and/or laboratory trials
• Hiring and supervising at least one technician to maintain the lab and support customer trials
• Developing specifications and facility recommendations for local manufacturing of SEC products, either at Technic or third-party facilities
• Advise on hiring and lead training of operators for local manufacturing
• Set operating procedures, quality targets and release specifications for any eventual locally made semiconductor products
• Developing external collaborations with co-suppliers, Universities, or Government Research Institutes to strengthen our offering, improve our market visibility, or secure funding to advance our product offerings.

#SCR-carson-cheong

⭕ Cheong Kar Chun ⭕ Team Manager ⭕ R1980386

⭕ The Supreme HR Advisory ⭕ 14C7279

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Lab Assistant to be part of their team for ongoing transformation projects.

This is a 1 Year contract (Convertible) role. They are located at Buona Vista – Walking distance from the MRT station.

5 days work week - Monday to Friday (8.30 am to 5.30pm)

Training will be provided for Entry Level (structured training programs)

Duties

• Prepare samples and reagents
• Operate sample handling equipments
• Ensure data accuracy and detail records
• Adhere to safety procedures
• Any other duties as assigned by supervisor.

Requirements

• Possess minimally Diploma in Chemistry / Lifescience / Biotech / Pharmacy / Food Tech related fields
• No experience needed - Training Provided (structured training programs)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Attention to: Alethea

EA License No: 19C9682
Reg No: R21101676
Ng Zhi Qing Alethea

HIRING: LAB ANALYST (AS&T)

Wafer Processing Lab Lead

(Strip, Etch, and Clean (SEC) solutions)

Product Application Laboratory (PAL) Leader

• Working hours : 9 am–5:45 pm
• Working Days: Mon - Fri
• Working location: Gul Circle
• Salary: S$ 7,500 - 8,000
• DEPARTMENT : PRODUCT APPLICATION LAB
• REPORTS TO : ASSISTANT GENERAL MANAGER, APPLICATION & PRODUCT MGT.

About the company:

A privately held, global company with a belief in innovation and employee empowerment. With over 1000 employees worldwide, a global supplier of specialty chemicals, custom finishing equipment, engineered powders, and analytical control systems to the electronic component, printed circuit board, semiconductor, industrial finishing and decorative industries.

Job Description

RESPONSIBILITIES

This role will be responsible for our Product Application Lab for Semiconductor applications. Working closely with the Sales team and global technical resources, the selected candidate will support the development and growth of Semiconductor industry products in the region, focused on Southeast Asia. The initial focus will be on Strip, Etch, and Clean (SEC) solutions, but will also grow to include the Elevate® line of electroplating products. Specifically, the duties will include:

• Having a deep understanding of Technic products for the Semiconductor industry,
• Keeping abreast of industry developments and market position/performance of comparable competitive products.
• Working with Sales team to select appropriate customer and application targets
• Visiting customers across the territory to understand their equipment, process, and product performance requirements.
• Starting-up and operating the Technic Wafer Processing and Failure Analysis lab
• Conducting product functional performance testing & measurements either on-site or coordinating with other Regions to generate test results remotely.
• Advising on laboratory upgrades needed to better serve customers
• Liaising with customers during qualification tests and providing trouble-shooting advice after installation
• Recommending the best product for the application based on product experience and/or laboratory trials
• Hiring and supervising at least one technician to maintain the lab and support customer trials
• Developing specifications and facility recommendations for local manufacturing of SEC products, either at Technic or third-party facilities
• Advise on hiring and lead training of operators for local manufacturing
• Set operating procedures, quality targets and release specifications for any eventual locally made semiconductor products
• Developing external collaborations with co-suppliers, Universities, or Government Research Institutes to strengthen our offering, improve our market visibility, or secure funding to advance our product offerings.

Requirement

• The role may require regular travel Overseas (1-2 times per month) & less frequent travel to France and the US (1-2 times per year)
• Qualifications: Graduate degree (Masters or PhD) in Chemistry or Chemical Engineering
• Experience: 10 Years of experience in Semiconductor Wafer Processing industries

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Lab Technician / Lab Chemist (Surface Finishing Chemical)
5 Days
830am-530pm
$2500-$4000
Tuas South Drive (Company Transport at Boon Lay MRT)

Responsibilities

• Prepare solutions by weighing ingredients and dissolving and diluting substances
• Analyze organic and inorganic compounds to determine their composition
• Conduct qualitative and quantitative experiments taking into account the volume and structure of ingredients
• Customize formulas and use different reagents to test chemical reactions
• Write technical reports of the test results
• Develop nonstandard tests for chemical products
• Maintain lab equipment and troubleshoot or report on malfunctions
• Refine chemical products to improve their quality
• Ensure compliance with laboratory health and safety guidelines
• Sterilize equipment and store materials in secure places

Requirements

• Laboratory work is a plus
• Good knowledge of laboratory health and safety standards
• Diploma/Degree in Chemistry

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

The Opportunity:

As the APAC Product Manager, Pathology Lab, you will be responsible for:

• Developing and implementing strategies and innovative approaches, to drive the penetration of the Pathology Lab - Assays portfolio (Key focus on High Medical Value assays across Breast, Lung, and Gastric Cancer Portfolios).
• Driving Pharma Partnerships KOL & Pathology society engagements, thus enabling faster penetration of companion diagnostic assays.
• Forging strong collaboration with the affiliates within the APAC region, regional colleagues across Clinical, Lab & C Suite, Access and Regulatory functions & global teams.
• Driving the brand and channel fill strategy for the cited areas of focus, while working closely with the product manager for HMVA & PHCS, regional CVS colleagues as well affiliates.
• You will report to the APAC Business Lead Pathology Lab, Lab & C suite Value stream.

As the Product Manager /Business Manager - Assays, Pathology Lab, you will be responsible for:

• Responsible for managing multiple stakeholders as the single point of contact for portfolio stakeholders, Global Functions, Regional Functions, Affiliates, etc, for all discussions regarding assigned portfolio
• Define focus areas and KPIs for marketing campaigns and team up with the other Product Managers/ Business managers within the Pathology Lab team, for innovative profitability improvement measures like paired consumables/PAB uptake/Digital Pathology Algorithms etc
• Provide support to business analysis, KPI tracking, and other projects as required
• Support affiliates in executing planned portfolio strategies to achieve business objectives.
• Utilize strong commercial acumen with a deep understanding of the diagnostic world in the context of overall healthcare market and environment
• Have insights into trends or technology for the assays portfolio, identify how to tap into these trends to streamline performance, become market shapers, grow market share and outperform the competition, through the Pathology Lab Communities
• Around 30% travel will be required for this role.

Who You Are:

• Hold a Bachelor’s degree in Marketing or Science; advanced degrees (Masters, MBA, Medical Degree, or PhD) preferably with over 10 years of relevant work experience within the industry;
• Self-motivated, proactive, with proven analytical, problem-solving, and commercial acumen.
• Well-organized, capable of prioritizing and managing multiple projects in a fast-paced environment. Strong communication, presentation, negotiation skills, and experience in managing collaborations with internal and external stakeholders.
• Intrapreneurial mindset with proven ability to incubate and foster agile organizations with a complex, global corporate environment
• Familiar with the technological trends and their relevance to the healthcare industry.

Salary: up to $2400 (basic)

Duration: 1 year

Location: Tuas (bus pickups - Jurong East, Outram, CCK, Woodlands)

Working Hours: five day week. 2 weeks of Morning followed by 1 week of afternoon shift

Responsibilities include:

Monitor Product Quality Compliance

Perform routine and non-standard tests on materials, products and other Quality Control purposes using HPLC, GC, Empower system etc

* Identify OOS, deviations and quality problems

* Report testing activities and results

* Comply with Quality and HSE procedures when carrying out sampling and QC tests

Manage Laboratory Operations

* Follow the organization’s operational excellence model for laboratory work

* Perform routine calibration and maintenance of laboratory equipment

* Report equipment OOS issues and equipment purchase requests

* Maintain integrity, accuracy and completeness of QC data and records

Optimise quality and efficiency of department workflows and activities

* Assist in preparing and participate for laboratory inspections and audits

* Compile data to support business and performance metrics reporting

* Propose solutions to improve QC procedures, activities and workflows

* Gather information to support feasibility assessments of introducing new QC procedures, systems and equipment

Requirements:

- Minimum Diploma in chemistry or science or related course

- At least one year experience in QC lab. Knowledge in operating HPLC and Empower software added advantage.

- Requires to work on shift.

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

The Opportunity:

As the Product Manager - Assays, Pathology Lab, you will be responsible for:

• Developing and implementing strategies and innovative approaches, to drive the penetration of the Pathology Lab - Assays portfolio (Key focus on Core Antibodies including Cell Marque, Discovery Reagents, Hematopathology portfolio & associated new launches like Neuropathology).
• Forging strong collaboration with the affiliates within the APAC region, regional colleagues across Clinical, Lab & C Suite, Access and Regulatory functions & global teams.
• Driving the brand and channel fill strategy for the cited areas of focus, while working closely with the product manager for HMVA & PHCS, regional CVS colleagues as well affiliates.
• You will report to the APAC Business Lead Pathology Lab, Lab & C suite Value stream.

As the Product Manager / Business Manager - Assays, Pathology Lab, you will be responsible for:

• Responsible for managing multiple stakeholders as the single point of contact for portfolio stakeholders, Global Functions, Regional Functions, Affiliates, etc, for all discussions regarding assigned portfolio
• Define focus areas and KPIs for marketing campaigns and team up with the other Product Managers/ Business managers within the Pathology Lab team, for innovative profitability improvement measures like paired consumables/PAB uptake/Digital Pathology Algorithms etc
• Provide support to business analysis, KPI tracking, and other projects as required
• Support affiliates in executing planned portfolio strategies to achieve business objectives.
• Utilize strong commercial acumen with a deep understanding of the diagnostic world in the context of overall healthcare market and environment
• Have insights into trends or technology for the assays portfolio, identify how to tap into these trends to streamline performance, become market shapers, grow market share and outperform the competition, through the Pathology Lab Communities
• Around 30% travel will be required for this role.

Who You Are:

• Hold a Bachelor’s degree in Marketing or Science; advanced degrees (Masters, MBA, Medical Degree, or PhD) preferably with over 10 years of relevant work experience within the industry;
• Self-motivated, proactive, with proven analytical, problem-solving, and commercial acumen.
• Well-organized, capable of prioritizing and managing multiple projects in a fast-paced environment. Strong communication, presentation, negotiation skills, and experience in managing collaborations with internal and external stakeholders.
• Intrapreneurial mindset with proven ability to incubate and foster agile organizations with a complex, global corporate environment
• Familiar with the technological trends and their relevance to the healthcare industry.

Job Description:

• Prepare for patient appointment by obtaining required information such as lab results, medical record and other information as required.
• Monitoring the patient during the treatment and procedures and providing nursing care as needed.
• Pre-screening duties such as drawing blood.
• Assist medical providers during treatment and procedures.

Requirement:

• Minimum Diploma/ Degree in Nursing
• Valid Singapore Nursing Board Practicing Certificate for Registered Nurses
• Experienced Cardiac ICU Scrub Nurses who are open to transitioning to Cath Lab roles are welcome to apply

Interested applicants, kindly furnish us with your detailed resume in MS Words format and click "Apply Now" button.

** We regret to inform only shortlisted candidates will be notified. Applicants who do not possess necessary experience or qualification will still be considered on individual merits and may be contacted for other opportunities.**

**JobStudio will not solicit any money, request to use your bank account for business or request you to transfer any monies to any parties. Please be aware of scams impersonating JobStudio and our employees. You may call our office directly for verification. We will not be liable for any loss arising from scams. **

JOBSTUDIO PTE LTD

EA License No: 10C4754

EA Personnel: Kam Xiu Ping

EA Personnel Reg No: R21101828

Benefits:

• Basic Salary up to $2,700 with yearly increment based on performance.
• Allowance and Attractive bonuses provided.
• 5 days work week include weekends & Public Holiday
• Our company emphasises on good career progression.
• Shift Work timings: (6.30am to 3.30pm), (8am to 5pm), (1.30pm to 10.30pm) – Depending on roster basis

Job Description:

This is a full time role for a Technician (Building Maintenance) located in River Valley Road. Our clients are pioneer companies that played an integral role in the country’s physical and economic transformation.

You will be responsible for performing preventive maintenance, repairs, and troubleshooting for mechanical and electrical systems. You'll conduct routine inspections of fixtures, fittings, cooling towers, and chillers, and supervise contractors during repairs and testing. Addressing fault reports, complaints, breakdowns, and customer service requests promptly is crucial. Additionally, you'll report any irregularities observed during maintenance, complete maintenance logs and schedules accurately and on time, and ensure compliance with building and fire safety regulations.

Qualifications:

• Minimum 2-3 years of relevant experience in building or facilities maintenance
• NITEC in Building Services, Electrical, Mechanical, Facility Technology or equivalent
• Good working knowledge in building, mechanical & electrical systems
• Able to work on rotating shift, public holidays and weekends

Position Title: Hotel Building Technician

Salary: $2000 - $3000 (depend on experience)

Working Days: 6 days (8 hours/day)

Working Location: Beach Rd 189692

Responsibilities & Duties :

• Perform general maintenance and repairs on plumbing, electrical.
• Ensure guest rooms are well-maintained, including fixing plumbing, electrical, and furniture issues.
• Conduct regular inspections of hotel facilities to identify potential maintenance problems.
• Respond to emergency repair needs (e.g., burst pipes, electrical outages, power trip, water heater malfunction,promptly.
• Maintain the hotel’s exterior, including landscaping, parking lots, and outdoor lighting.
• Ensure all safety and security systems, including fire alarms, extinguishers, and emergency lights, are functioning.
• Work closely with housekeeping and management to address and resolve maintenance issues.
• Ensure compliance with safety, health, and environmental regulations.
• Maintain an inventory of maintenance supplies and tools.

Requirements:

• Proven experience in hotel or building maintenance .
• Ability to troubleshoot and solve problems quickly.
• Basic knowledge of safety and fire regulations.

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

whatsapp: 85986715

3号司机

有空调等电器安装经验优先

有3号驾照

薪水: $2500-$3000

上班时间: 8:30-17:30早做完早下班

月休四天

地点: Woollands

Driver No. 3

Experience in installing electrical appliances such as air conditioners is preferred

Have a No. 3 driver's license

Salary: $2500-$3000

Working hours: 8:30-17:30 and leave work early

Four days off per month

Where: Woollands

Jie Shun Jia | EA License No.: 24C2410 | EA Registration No.: R24124440 (FENG YINGJIE)

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Operation Technician, Team Leader (Chemical Plant/Incinerator)
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm/Shift Work: Day – 8 am – 8 pm, Night – 8 pm – 8 am
• Salary Package: Gross up to $4,500 (Basic + OT/Shift Allowance) + Company Transport/Transport Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Oversee the daily operation and process control of the incinerator and boiler turbine plants.
• Develop strategies and implement plans to enhance operational efficiencies and reduce costs.
• Manage the daily requirements of consumables, tools, and equipment for the plant.
• Oversee budget planning and cost management for maintenance operations.
• Establish and enforce operational procedures according to ISO & OHSAS standards, including training and communication to staff.
• Conduct regular inspections and prepare plant equipment for audits and inspections to meet all regulatory and safety standards.
• Ensure adherence to environmental regulations concerning air pollutants.
• Develop and maintain detailed maintenance schedules, managing manpower for both routine and shutdown maintenance effectively.
• Coordinate with other departments to manage power distribution and communicate any potential interruptions.
• Supervise, motivate, and lead a team of technicians and operators, ensuring high performance and compliance with safety standards.
• Develop and conduct in-house training for staff on operations, maintenance, emergency responses, and safety procedures.
• Manage documentation, records, and operational data analysis and reporting.
• Monitor and ensure contractor compliance with safety standards during maintenance works.
• Regularly review and assess contractor performance.
• Support the engineering department in maintaining and upgrading plant facilities, including developing preventive maintenance plans.

APPLY NOW!!!

• Diploma in Mechanical Engineering, Chemistry, or relevant field.
• Minimum of 3 years of supervisory experience in maintenance operations, preferably in rotary kiln incinerator or boiler operations.
• Ability to work in a 12-hour rotating shift pattern.
• In-depth knowledge of industry-specific safety and environmental regulations.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69800 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• Undertake the Installation, Repair and Maintenance of Electrical Systems.
• Follow safe work practices and risk control procedures
• Troubleshoots electrical issues
• Inspects circuit breakers and other electrical components
• Conducts general electrical maintenance
• Assembly and installation of the components and fittings.

Installation and configuration

In many industries, the primary role of the technician is to instal hardware and software. If you work in IT, your work can involve installing computer, networking and database system software and hardware. In factories, the technician can instal manufacturing equipment. As an HVAC technician, your job can entail installing air conditioners, thermostats and compressors. Technicians in electrical industries might instal cables, transformers, distribution boards and other power generation, transmission and distribution equipment. Besides installing equipment, technicians also configure them to ensure the infrastructure performs its functions properly.

Maintenance and repair

It's also the responsibility of the technician to maintain and repair the equipment they instal. This can involve preventive maintenance and servicing, replacement of faulty components or upgrading of hardware to improve performance and efficiency. They diagnose and troubleshoot technical issues to find out their causes, resolve the problems and prevent or limit future incidents.

Equipment operation

Technicians often operate equipment and infrastructure and ensure the installations perform their functions optimally. To do this, they may read manuals or even undergo specialised training. Technicians may also teach other people how to use the equipment. For example, when a company instals a new networking infrastructure and the users don't know how to use it to connect to the internet, a technician is usually the one who shows them how the equipment works. Equipment operation can also involve collaborating with colleagues, such as other technical staff.

>work day shift and night shift

>overtime

We take great pride in delivering impeccable hospitality at the Hotel Miramar Singapore. Our well-equipped hotel is dedicated to providing modern, comfortable living and unparalleled friendly service. Our exceptional location is also one of the many reasons people choose to stay with us. We offer opportunities for career stability and advancement. We welcome you to join us!

The ideal candidate is a motivated, well-organized individual who has a deep understanding of prospecting and developing strong relationships with customers.

Highlights:

• Attractive Salary Package with AWS and Performance Bonus
• Staff meals, dental and medical benefits, birthday voucher, F&B discounts, and complimentary season parking for staff.
• Career Progression
• Training Opportunity

Job Description:

• To ensure all equipments functioning satisfactorily and safely.
• To maintain repairs for all electrical systems.
• To inspect and maintain all air-conditioning/ventilation equipments.
• To inspect and maintain the plumbing/sanitary systems.
• To perform other duties as directed by the Maintenance Supervisor.

Requirements:

• Singaporeans & PR only.
• Possess at least NTC 3, NITEC in Electrical or Mechanical Trade Certificate.
• At least 1-2 year experience in a similar capacity in the Hospitality industry.
• Able to work on 6 days, 3 rotating shifts, weekends and public holidays.

HOW TO APPLY:

We want to hear from you! Interested candidates are invited to email your updated resume by 11 Jan 2025.

Walk-IN (Singaporean/Permanent Resident only) :

You can visit the HR Office at Hotel Miramar any time from Monday to Friday, between 10:00 AM and 4:00 PM. Find us at room #02-25.

*Ensure your resume provided to us does not contain your full NRIC number during your job application. Only short-listed candidates will be notified

• Able to perform welding and installation
• Able to understand drawings and coordinate with Project Manager for site updates
• Able to inspect materials and structure of welding
• At least 5 years experience in relavent industry
• Is a team player
• Able to work independantly
• Construction industry knowledge and understanding

Job Description:

• Perform installation of electrical related equipment following company policies and manufacturer’s specifications.

• Carry out wiring of both low and line voltage to cooling and heating equipment.

• Determine the right material needed for installation work by pre-measuring jobs.

• Provide necessary support to other team members to be able to complete tasks on time as instructed by management.

Job Requirement:

• Physically capable of performing the above duties.

• With relevant experience in electrical work.

• Possess good electricaltechnical knowledge.

This is a fantastic opportunity for a skilled production operative to join a manufacturing environment in a leading manufacturer of radio frequency (RF) antenna products. The role would suit a motivated, individual looking to work as part of a friendly team.

The company is an industry leader in a specialist field with extensive experience and a well-established reputation, producing a range of bespoke and standard RF antenna products ranging from large volume products for global companies to small volume custom work for highly specific applications. The company manufactures products for a diverse range of industries and market sectors including public safety, defence, transportation, utilities, manufacturing, construction and consumer goods.

Job objective:

• Assembly of RF products – experience in fitting connectors is essential
• Soldering cables to PCBs – experience essential
• Assisting with fulfilment of production orders
• Reading and understanding production instructions
• Assisting with quality test and inspection
• Assisting with stock inventory management
• Ensure that all procedures are adhered to guarantee a high quality product at all times and ensure products produced comply with quality standards.
• Liaising with other departments as required fulfilling orders and ensuring manufacturing proceeds according to the needs of the customers and the business.
• Assisting in maintaining the efficient operation of the manufacturing area.
• Assisting resolution of problems and implementing process improvements to gain efficiencies and reduce wastes (Time, process, material) and advising of any issues or improvements
• Assisting in maintaining a clean working environment, by cleaning work areas and shop floor at regular intervals.
• Maintaining safe working environments by following relevant H&S procedures, and advising of any issues or improvements.
• Helping with pick and pack if needed
• Undertake any reasonable ad hoc work as requested by the Site Manager

Specific Knowledge & Skills:

• Committed to safety, quality and productivity
• Soldering and connectors fitting experience is essential
• Knowledge how to use network analyser would be beneficial
• Good computer literacy and confident working with numbers – basic numeracy essential
• The ability to work independently and as part of a team
• Attention to detail
• Flexibility to effectively switch between tasks
• Good time-keeping
• Soldering: 2 years (Required)

Working Hours:

Permanent full time position, 40 hours per week with 1 hour lunch break (unpaid)

Monday to Friday: 8:30-5:30pm

Work Location: In person; Space@Tampines; 18 Tampines Industrial Crescent; Singapore 528605

Job Type: Contract 12 months, with a possibility turning it to full Time permanent

Pay: $2,500.00 - $3,000.00 per month

Supplemental Pay: 13th month salary

Benefits: Employee discount; Health insurance

1. JOB DESCRIPTION

Job Title

Technician/Engineer (Contract/Perm)

Occupation

Technician/Engineer

Job Description & Requirements

Job Highlights

• Mon - Fri 8.30am to 5.30pm. Training provided
• Transport and Mobile Allowance + OT + Medical reimbursement

Job Description

Responsible for facility hook-up, installation, repair and start-up process of semiconductor equipment.

Responsibilities

• Perform installation work according to guidelines and procedures
• Perform safe and proper move-in according to procedures
• Tally and check the conditions of parts and accessories
• Support engineering activities
• Ensure good EHS compliance

Requirements

• Must possess Min. Certificate / Diploma in Electrical / Mechanical / Electronic Engineering or equivalent
• Preferred bilingual in English and Chinese to handle Chinese speaking customers’ technical enquires & conduct trouble shooting based on customers’ feedback
• Cleanroom environment
• Able to start immediately preferred

Job responsibilities

• Perform routine maintenance and repair work on facility infrastructure and cryogenic storage tank farms.
  Monitor and manage spare parts inventory to ensure optimal stock levels.
• Inspect and assess the operational condition of machinery and equipment.
• Assist in supervising contractors during maintenance activities or project execution, ensuring adherence to project timelines and quality standards.
• Conduct regular maintenance checks, including gas sampling tasks, to maintain operational efficiency.
  Maintain accurate and up-to-date records of all maintenance activities.
• Ensure that all work is performed in compliance with established standard operating procedures.
• Observe and enforce strict adherence to safety protocols and safe working conditions.

Requirements

• Minimum qualification: NITEC in Mechatronics, ITE, or an engineering-related field.
• A minimum of 2 years of relevant experience, specifically in the maintenance of cryogenic liquid and compressed industrial gas equipment.
• Valid Singapore fork-lift license.

Job Responsibilities:

• Operate, maintain, and repair central chiller plant equipment, including chillers, cooling towers, pumps, and related components.
• Carry out preventive maintenance of properties and attend to all work orders issued by tenants and management
• Monitor system performance, conduct regular inspections, and perform preventive maintenance to ensure optimal efficiency and reliability.
• Ensure compliance with safety rules and regulations
• Maintain and monitor building systems
• To assist the departments in all aspects pertaining to electrical, ACMV engineering work to plumbing, sanitary installations, fire sprinkler, alarm systems, lifts and escalators etc

Key Requirements:

• Minimum 5-7 years of related building maintenance experience
• Skilled in Building Works, M&E, Air-Con and/or Electrical
• Independent, proactive and responsible team player
• Flexibility to work shift hours
• Effective communication skills to work collaboratively within a team and communicate with tenants and management.

Responsibilities:

• Execute daily routine calibration and repair work orders as assigned.
• Troubleshooting instrument breakdowns and carry out intermediate repairs on production systems or report back to Engineer/Manager.
• Supervisor vendors/service providers activities for routine calibration work to ensure instruments are maintained in full operational status.
• Promptly inform engineers of any incidents or events, irrespective of the nature and severity.
• Ensure all calibration works are duly carried out as scheduled and in compliance with Engineering standards and calibration procedures.
• Work with contractors, vendors/service providers for calibration work to ensure instrument is maintained in full operational status.
• Coordinates with external contractors for specialized calibration work
• Report promptly to Engineers of any incidents or events, irrespective of the nature and severity.
• Perform work order documentation in SAP and calibration data in CMX.
• Good housekeeping of work areas.
• Inform Engineer/Manager when encounter non-compliance issues including work delay, breakdown, missing parts and etc.
• Any other duties as assigned by Supervisor/Manager.

About You:

• NITEC / Higher NITEC in Electronics Engineering or Polytechnic
• Preferably 3-5 years work experience in related field
• Good understanding of electronics theory
• Able to perform shift work and respond on-call for calibration/service breakdown and support ongoing operations.
• High compliance in EHS and GMP

Duration : 12 months. Option to extend/convert subject to performance review.

Based in Tuas.

Job Description & Requirements

1. Assembly of higher end products which require self-interpretation and understanding of technical drawing, assembly requirements, which also includes Geometric Dimensioning and Tolerance
2. Electrical wiring and soldering for installation and assembling of mechanical and sub-assembly level components.
3. Troubleshooting of machinery, servicing and maintenance.
4. Perform testing and commissioning of machines and testers.
5. Providing smooth and continuous running and support on machines and projects.
6. To provide rework or make call for the required rework processes.
7. Providing guidance to the team of operators.

Competence Requirements

• Preferred to have NTC / Diploma in engineering field or equivalent.
• Fresh NTC / Diploma holder may be considered, else others with minimum 2 years of related work experience in manufacturing environment.
• Able to read and interpret technical drawing.