You will prepare operating theatre room and equipment for surgical procedures as well as assist in patient care in the theatre. You will perform portering, housekeeping, despatching duties, including maintaining and replenishing of Operating Theatre supplies. You will also perform adhoc duties as and when assigned by department.

Job Description

• Supply medications to the inpatients via regular trolley top-up system and on nurses request
• Carry out new admission screening and medication reconciliation
• Perform data entry for the supply to inpatients, outpatients and discharged patients
• Pack and dispense medications under the direct supervision of the pharmacist
• Verify discrepancies in prescriptions with the prescribers where possible
• Ensure the correct billing / charging of drugs supplied to the patients
• Track inventory level and perform restock whenever necessary
• Participate in stock take in the pharmacy
• Monitor expiry date of medication
• Assist in the operation of the retail pharmacy
• Carry out any other job duties as assigned from time to time

Requirements

• Diploma in Pharmaceutical Sciences or a Certificate in Pharmacy Technician Course
• Minimum 1 Year work experience as a Pharmacy Technician in relevant clinical settings will be an advantage
• A team player with good communication and interpersonal skills

Service Technician

Salary: $1, 500 - $2, 000
Working Days: 5 days , 8.30am – 5.30pm
Location: Kwong Min Road (Boon Lay)

Job Responsibilities:

• Knowledgeable in servicing and maintenance for refrigeration / electrical machines.
• Identifying faults, troubleshoot, and repair various commercial kitchen equipment.
• Performing repair jobs promptly and efficiently.
• Submitting of daily report for servicing & maintenance functions.
• Ensure all documents are updated upon completion of work
• Ensuring all works comply with the appliance standards and Health and Safety Act.
• Perform equipment quality compliance check.
• Work closely with direct superior to maximize repair rates.
• Maintaining service vehicle in good condition.
• Maintain the work bay and workshop areas in orderly and safe working conditions and exercise good housekeeping practice.
• Any other duties as assigned.

Job Requirements:

• Hands-on experience in installation, maintenance, troubleshooting and/or repairs in electrical machines and mechanical diagnostic skills.
• Possess a valid Singapore class 3 driving license is preferred.

The Supreme HR Advisory Pte Ltd || EA No: 14C7279

Ng Syu Ching (Ellis) || Reg No: R22107944

Service Technician

• Working Days: 5.5 days
• Working hours: 8.30am - 5.30pm (Mon - Fri)
  Working hours: 8.30am - 1.00pm (Sat)
• Location: Kaki Bukit (Office) / working at site
• Salary: $2,600 - $2,800

Requirements:

• Diploma in Electronic Engineering
• 2 to 3 years working experience in ELV (Public Address, Card Access, Panic Alarm) or AV Systems company
• Driving license Class 3

Responsibilities:

• Attached to Senior Technician/Engineer for daily assignment
• To do termination, soldering of points, connection & testing of ELV equipment on site
• To update drafter on changes on drawings
• To attend to service call, do troubleshooting of ELV Systems
• To carry out maintenance servicing of ELV Systems
• Any other tasks assigned as and when required

Lim Jun Yao

Reg No: R1989028

The Supreme HR Advisory Pte Ltd

EA No: 14C7279

ALG is currently hiring Aircraft Technicians to work for our aviation client based in Singapore. This role will be on a minimum one-year contract with an extension or a permanent role likely should you excel.

Job Responsibilities:

• Responsible for the broad range of maintenance tasks for several commercial aircraft models.
• Troubleshoot problems, make repairs, and complete inspections.
• Ensure smooth maintenance processes with strict adherence to schedules & targets
• Verify the aircraft conformity and the state of its engine or cockpit pieces
• Maintain the aircraft, repair the reported defects and ensure the plane service so it can leave in confidence.
• Supervise other technicians and assist with training.

Job Requirements:

• Diploma/NTIC in aeronautical engineering, aerospace, or any equivalent
• 3-4 years' of relevant experience in line/base maintenance for commercial aircraft is required
• Willing and able to perform rotating shift, including night shift work
• Be available to start immediately

If you're interested in this role, please APPLY NOW! Do note that only shortlisted candidates will be notified.

EA License Number: 11C4379 | Registration Number: R22105273

We are recruiting IP Security (CCTV) and Access Control technician for installation, servicing, troubleshooting for projects.

• Must have strong knowledge of CCTV, access control and hardware installation/service, structured cabling methods and standards, Basic understanding of computer networking programming
• Looking for a motivated self-starter who can work independently and find solutions to get jobs done, Long-term employment with an array of benefits for the right person
• Travelling is required, Applicants must meet company standards in relation to background, Salary is negotiable and will be based on experience

- Intermediate PC skills including knowledge of Microsoft Office
- Effective communication
- Detail oriented and able to work independently or in a team

- Class 3 Driving License (Preferred)

• Able to read engineering drawings
• Able to set up individual tools for machine operation in CNC Milling Machine
• Work accordingly to production plans and to maintain operational efficiency
• Able to carry out in-process measurements and to maintain product quality
• To develop individual tooling for CNC Milling Machine
• To generate and load NC program to designated CNC Milling Machine
• Able to problem solve and to make decisions to decrease cycle times and to increase efficiency
• To woek accordinly to Production Plan and to maintain operational efficiency
• Will be responsible for CNC Production Team performance and CNC Milling process
• Monitor process/ machines and to troubleshoot and report any deviations to respective personnels or to Senior Manager
• To maintain cleaniness according to the Company's 5S policy
• Maintain continuity among working teams by documenting and communicating
• Has preferably CNC Milling Machine and Precision Engineering background
• Has relevant experience in the metal fabrication, semi-conductor industry

Responsibilities

• Provided first/second level trouble shooting & resolve production stoppages due to equipment issues.
• Monitoring and control facilities equipment.
  Replenished production material where applicable in the respective workstation.
• Performed process control checks where applicable.
• Participated in preventive maintenance & calibration checks for production and measuring equipment as scheduled
• New production line setup and fit-out works.
  Utility setup and equipment move-in, move out document submission.
  In charge for facilities equipment and maintenance of compressor & exhaust system, HVAC, ACMV

Requirements

• Min Nitec in Mechanical Engineering
• Min 2 years experience in Manufacturing/Semicon Company
• Strong experience in HVAC/ACMV

Interested candidates who wish to apply for the advertised position, please APPLY with an updated copy of your resume to [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Japanese MNC
• 5-day work week
• S$6,200 Higher
• Knowledge and understanding of ISO 9001, IATF 16949 or similar Quality systems with experience in Quality audits.

Our client, a leading chemical manufacturer, is looking for suitable talents to join their growing business as QC Lab Supervisor.

RESPONSIBILITIES:

• Supervise QC laboratory technicians and ensure all technicians working in QC lab are competent on quality and safety requirements through on-job and refresher trainings.
• Ensure quality and safety procedures are reviewed and updated in compliance with ISO 9001/IATF 16949 standards.
• Troubleshoot instrument error, investigate root cause of QC lab instrument abnormality and provide corrective and improvement actions (CAPA).
• Maintain LIMS (Laboratory Information Management System) and support in system enhancements.
• Closely coordinate and collaborate with all relevant personnel (production supervisors, process engineers and external parties) to resolve any quality and safety related issues in QC lab.
• Understand and implement Customer Specific Requirement (CSR) related to QC laboratory.
• Support Management of Change (MOC) for any planned changes in QC laboratory that impact quality and safety.
• Responsible for departmental purchases to support laboratory operation and improvements.
• Responsible in the installation, commissioning, preventive maintenance, calibration and verification of analytical instruments and systems (Viscometer, GPC, GC, HPLC, FTIR, KF Titrators, etc.).
• Responsible for review and upkeep of Risk Assessment, Work Instructions, and related QC laboratory documents and record.
• Participate in both internal and external audits related to quality and safety. Perform auditing on periodic basis (system, process and product audits).
• Perform any delegated assigned by Quality Manager/Assistant QC Manager.

REQUIREMENTS:

• Bachelor Degree in Chemistry, Chemical Engineering or equivalent.
• Minimum 5 years of working experience in Quality related functions such as Quality Control or Quality Assurance.
• Knowledge and understanding of ISO 9001, IATF 16949 or similar Quality systems with experience in Quality audits.
• Demonstrated leadership skills including teamwork, communication, prioritization and change management.

OTHER INFORMATION:

• Location: Jurong Island (company transport provided)
• Working hours: Monday to Friday, Office Hours
• Salary: S$6,200 higher (Salary will commensurate according to experience & qualifications).
• The Company strives to achieve employee satisfaction and provides a conducive working environment, attractive incentives, and remuneration to all staff.

HOW TO APPLY:

Interested candidate, please submit your updated resume in MS WORD Format to Florence Pang Rou Jing (R23118044) :

Email – [email protected]

or call your Friendly Consultant, Florence at 6590 9906 or WhatsApp 8655 6810 for a confidential discussion.

Please click “Apply Now” button to submit.

Please indicate the below information in your resume:

• Current & Expected salary

• Reason(s) for leaving

• Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence. By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Element has an opportunity for a Metallurgy Technician. In this role, your primary responsibility is to perform routine, metallurgical, mechanical, failure, corrosion testing facilitating metallurgy operations at site or at a laboratory.

This role is based in Tuas location.

Job Duties:

• Perform routine mechanical testing (tensile, bend, charpy impact, hardness) including CTOD and metallurgical testing (micro / macro examinations) Involvement in site / field testing
• Coordinating with the technicians in the team to carry out work as per the planning schedule and assist with hazard identification and risk assessment exercises within their areas of responsibility
• Conduct either or combination of testing, analysis, calibration, monitoring, sampling and collection and sample preparation as directed
• Carry out routine laboratory tests, analysis, machining or preparation in line with authorized technical competence
• Carry out daily sample collection and ensure work compliance to ISO 17025 requirements

Job Description:

• Possess a minimum of Diploma in Metallurgy or related discipline, with 2-4 years of relevant working experience
• Good knowledge on international standards and codes
• Possess driving licence
• Good communication skills
• Self-motivated team playing with excellent organisational and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job Description

Accountable for handling & executing Electrical related works for:

• Preventive Maintenance
• Corrective Maintenance
• Reactive Maintenance
• Ad-hoc jobs

Job Responsibilities

• Preparing the list of works, materials, tools, machineries, and other things to be used.
• Planning of works for the task given.
• Conduct inspection before and after the work.
• Able to communicate with the User
• Communicate closely to Supervisors by updating the works such as before, progress, after or completion of works on site.
• Hands-on and Key Mechanical experience needed

1. Lifts & Escalators
2. Pneumatic tubes
3. Fire Protection System & Fire Alarm System
4. Autodoors
5. Pumps
6. Piping and Plumbing
7. Wheelchair
8. Macerator
9. Patient beds
10. Mechanical system License renewal
11. Participate with the client on site walkabout as and when required.

• Routine servicing, repairs and replacement of spares, consumable materials, items and components to all systems and equipment to ensure that they are operational.
• Responsible for any ad hoc duties tasked by direct Supervisor or Management
• Carry out preventive and corrective maintenance of the designated Building premises as assigned.
• Documentation of scheduled routine findings and rectification.
• Attend to all work orders issued by the operations and management
• To handle & manage external Specialist contractors awarded jobs on-site.
• To perform any ad hoc tasks as required

Job Skills

• Able to work independently as well as in a team environment with individuals of diverse background.
• Willing to learn.
• Able to communicate with English speaking customer/ user.
• Have good moral and right conduct.
• Pro-active, independent, able to work with minimal supervision and perform under pressure;
• Good team worker with service oriented mindset;
• Organizational and time management skills.
• Advanced critical thinking and problem-solving skills for fixing maintenance issues.
• High sense of integrity and able to adhere to strict compliance to hospital rules and regulations.

Job Requirements

• Educational qualifications with either of the following:

1. Higher NITEC (or equivalent) in relevant FM discipline, with minimum 3 years relevant experience; or
2. NITEC (or equivalent) in relevant FM discipline, with minimum 5 years relevant experience; or
3. Minimum SEC (Skill Evaluation Certification) of relevant FM discipline accredited by BCA, with minimum 5 years relevant experience; or
4. Minimum 10 years of experience. Able to work in hospital setting

• Able to work in hospital setting.
• Able to commit to 5.5 work week with staggered rest days implemented due to operational requirements.
• Able to work Overtime as and when operational requirements or work urgency entails.

Responsibilities:

• Perform daily sample analysis, scheduled by each Fab
• Maintain the PPE, tools and lab material stock level for daily usage.
• Review, generate and maintain QC Lab Risk Assessment (RA).
• Follow safety standard, SOP and client premises protocol at all times.
• Perform lab tools and equipment calibration and maintain in a good condition.

Requirements:

• Min Diploma in Physics, Material Science, or equivalent Engineering field
• Experience in laboratory or other designations in semiconductor industry
• Able to support overtime or shiftwork as assigned

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Contract duration: 6-12 months

Working hours: 3 days, 0830-1800

Location: Buona Vista

Responsibilities

Lab Assistant (6 months/1 year renewable contract)

Location: Buona Vista/One-North

Working days/hours: 3 days, Office Hours

Pay: $1380/mth

Job Scope:

• Conduct independent starch analysis and other laboratory analysis
• Able to execute independently starch analysis in terms of physical and application properties
• This will include jet cooking, handsheet marking and reactivity test
• Conduct starch bench marking test with the guidance from supervisor
• Support day-to-day operations (e.g., upkeep of lab supplies)
• Source quotations, raise PO and make payment with proper book keeping
• Process sample request from technical service
• Support new Product Development and application projects
• Setting up lab apparatus
• Keying of data and conduct appropriate data processing
• Support any other ad-hoc projects and general administrative duties as assigned

Job Requirement:

• Min A level/Diploma in Material Science/Technology
• Prior experience in research and development role is advantageous

Interested and qualified applicants, please send your resume to [email protected]

Ivy Yong Shi Mei

CEI Registration No.: R2198995

Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Element has an opportunity for a Test Technician to join our rapidly expanding team.As a member of the operations team, the Test Technician position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under direct supervision.

This role is based in Jalan Boon Lay, Singapore.

Job Duties:

• Perform counting on gold jewellery
• Quality Check on Hallmark conditions
• Perform Hallmark on Gold Articles

Job Requirements:

• Able to work under laboratory setting for fire assay and XRF
• Good eyesignt (with our without glasses) and strong attention to details
• Good communication skills
• Able to work independently with minimum supervision as well as a team player

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

The Opportunity

• Opportunity to work in US MNC in the Semicon industry
• 5 days work week.
• Location: East (Upper Changi)
• Company transport provided from various location
• Training provided!

Job Scope

• Handling testing and troubleshooting of the components and/or final assembled equipment
• You will be working in the Production Centre and Cleanroom environment
• Understanding electrical/mechanical diagrams and drawings
• Responsible for daily/weekly maintenance and troubleshooting of the Tools and Equipment
• In-charge of the set-up and calibration of the equipment/machine/tool

Requirements

• NITEC/Higher NITEC or Diploma in Mechatronic, Electrical, Electronics, or any Engineering related studies
• Experience in Assembly, Build, Test, Preventive Maintenance
• Candidates without relevant experience are welcome to apply

Next Step

• Prepare your updated resume (please include your current salary package with full breakdown such as base, incentives, annual wage supplement, etc.) and expected package.
• Simply click on 'Apply here' or email to [email protected] to drop your resume
• All shortlisted candidates will be contacted.

Maintenance Technician

Basic Salary: $2, 200+ OT

Working hour: Monday to Friday (8am - 5.15pm)

Working location: Gul Circle, Singapore (walking distance with MRT)

Job Descriptions:

• Ensure smooth supply of facility to production section.
• Maintain and ensure reliability of machines.
• Ensure the equipment are in good operating condition after inspection, service, repair and record in the related forms.
• Follow according to the maintenance schedule.
• Filing of all machine maintenance life history.
• Safety of machine for production and quality.
• Calibration of machines.
• Other general maintenance works.

Requirement: -

• Relevant experience in maintenance job for at least 1 year.

The Supreme HR Advisory Pte Ltd || EA No: 14C7279

Ng Syu Ching (Ellis) || Reg No: R22107944

Job Responsibilities:

• To perform routine preventive work and site corrective maintenance
• Responsible for integration of both hardware & software work as well as implementation
• Handle application programme change management, hardware deployment management & documentation
• Meeting with clients, reports and documentation
• Capable of performing troubleshooting independently
• Assist in control panel wiring

Job Requirements:

• NITEC in Electrical/Electronic or related discipline
• Able to perform standby duties (standby allowance will be provided if on standby duty) – standby only start after training (might be 6 months later)
• Good interpersonal skills, able to work both independently and in teams
• Site maintenance and travelling is required
• Class 3 driving license preferred
• Candidates with no prior experience will be considered

To apply, please visit www.gmprecruit.com and search for Job Reference: 23714

To learn more about this opportunity, please contact Yi Fang at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Law Yi Fang | Registration No: R1113115

Responsibilities

• To perform maintenance and servicing of lift/escalator, attend breakdown calls, carry out repairs & replacement of parts & other duties assigned.
• Ensure that all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements
• Schedule routine and preventive maintenance as needed.
• Establish and maintain a work order system to fulfil repair requests

Requirements

• Min Nitec in Engineering
• At least 1-2 years relevant working experience.
• Good inter-personal and communication skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or you can send to [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Routinely inspecting electrical systems such as wiring, fixtures, and appliances.
• Identifying faults or hazards.
• Troubleshooting system failures.
• Reviewing blueprints to understand wiring placement.
• Testing of electrical systems with oscilloscopes, voltmeters, and ohmmeters.
• Conducting maintenance repairs on old or faulty fixtures.
• Responding to fault requests.
• Providing suggestions for equipment replacement.
• Writing electrical maintenance reports.
• Installing new electrical appliances in the building.
• Adhering to safety and performance standards.

· Position: Electrical Technician

· Location: Gul Circle

· Working hours: Monday to Thursday 8.30-6.00pm, Friday 8.30-5.00pm

· Salary (commensurate with experience): Up to $3,800 + Performance Bonus

· Duration: Permanent

· Industry: Electrical Engineering Services

Main Responsibilities:

· Installation and troubleshooting for Electrical equipments

· Plan maintenance schedule for equipment & facilities

· Perform day to day work order rectification, preventive maintenance, trouble shooting and repairing of facilities equipment and systems

· Any other ad-hoc duties assigned

Requirements:

· At least 2 years of Electrical Technician/Engineering experience

· Possess ITE/Diploma in Electrical Engineering

Email to: [email protected]for more information.

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Associate Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Provide physical and technical support, general service and assistance to the surgical team in the preparation of required equipment for each specific operation; and responsible for the care and maintenance of equipment in the Major Surgery Suite/ Day Surgery Suite.

Key Responsibilities

• To perform daily operating room duties including maintain the cleanliness of the operating and equipment rooms, replenish of Operating Room supplies, upkeep the condition of the surgical equipment, potter of patients, and dispatch duties.
• Any other tasks assigned by the Nurse Manager/ Clinician.

Requirements

• GCE ‘N’ Level/ Technical Education or its equivalent.
• Must be comfortable with the Operating Room environment.
• Preferably with Operating Room experience; training will be provided to candidates without relevant experience.
• Able to handle physical work, including lifting or transporting of patients and equipment.
• Has good communication skills.
• Able to perform 3 shifts including weekends and public holidays if deployed to Major Operating Theatre.
• Able to perform 2 shifts if deployed to Day Surgery Suite.

Job Description

• Performing maintenance, repair and overhaul work on vehicles, equipment
• Perform major repair on engine and transmission
• Adhere to defined guidelines in regards to safety, orderliness
• Perform Store receiving, verification of goods receive/Issuing out and storing of goods.
• Perform Store administrative work
• Manage store room inventory
• Provide technical support when necessary.
• Perform basic repair, inspection, reassembly, refitting, and adjusting products as required.
• Maintain work area clean, safe, and orderly.
• To perform any other adhoc tasks assigned.

Working Hours:

• 5.5 days
• 8am - 5pm / 9am - 6pm

Requirement

• Relevant working experience highly welcomed
• Positive attitude, willingness to learn and good team player
• Candidate must possess at least Primary/Secondary School/"O" Level in Others or equivalent.
• At least 1 Year of working experience in the related field is required for this position.

About AP Media

AP Media is a creative media tech company that represents a new multi-disciplinary intersection point in the industry. At a time when audiences are craving for more immersive digital content, we are here to provide the technical expertise, experimental thinking and marketing innovation brands need to thrive.

We aim to make futurealistic experiences across a spectrum of domains, from real-time 3D set mapping, virtual and hybrid activations to interactive live streaming, immersive multimedia and experiential marketing.

We want to make these experiences accessible to everyone. To do that, we help connect the dots across six key dimensions for new brand opportunities you can create today.

We are looking for an open-minded, proactive, resourceful and dynamic individual, to join as a Virtual Production Camera Technician

Job Description:

• Setting up, configuring, operating, and maintaining various electronic equipment involved in outside broadcasting production, such as HD Video, UHD Video, Audio, and Communication Equipment.

• Troubleshooting camera equipment and effectively communicating and reporting any issues to the studio manager and manufacturer for problem-solving.

• Keeping equipment updated with the latest software releases to ensure optimal performance.

• Ensuring that technical equipment and systems meet safety and technical standards with minimal disruption to operations.

• Proficiency in reading and designing camera connection workflows.

• Maintaining and routing video signals, including split camera signals, genlock, and data cables.

• Familiarity with video standards, calibration, and routing signals such as HD-SDI, DisplayPort, HDMI, RAW files, color metadata, and data wrangling.

• Care and upkeep of Virtual Production systems, including cameras, tracking objects, cabling, and AV signal flow.

• Assisting camera crew with calibration workflows and mounting Virtual Production tracking hardware on set.

• Troubleshooting video feed, tracking, and calibration issues with the Virtual Production team.

• Communicating changeover status and camera changes to the Virtual Production team for smooth operation.

• Continuously learning and adapting to new technologies in the industry to maintain a cutting-edge skillset.

• Proficiency in video editing.

Job Title: Aerospace Technician (ID3346)
Location: Seletar
Working Hours: Mon-Fri 8:30 am- 6pm
Salary: $2500-$3000

Job Descriptions :
a. Refurbish aircraft cabin interior components
b. Perform visual and dimensional inspection of aircraft cabin interior.
c. Perform receiving inspection, disassembly, cleaning, repair
d. Perform scheduled maintenance and housekeeping tasks
e. Ability to handle basic tools and equipment
f. Adherence to Safety Standards in workshop environment

Job Requirements:
a. Min Secondary Education.
b. Team player with a positive attitude.
c. Minimum have 1-2 years experience in doing Aerospace technician

Job description

• Conduct routine field inspections to ensure safe equipment operation.
• Oversee chemical/Utility unloading into receiving tanks.
• Manage jetty operations, including vessel berthing and marine loading.
• Operate the Distributed Control System (DCS) to monitor terminal processes.
• Maintain comprehesive shift logs and support production activities.
• Troubleshoot equipment and take corrective action as needed.
• Perform basic maintainence tasks and replenish process chemicals
• Review and issue permits for maintenance activities.
• Support safety procedures and emergency response measures.

Requirements

• Minmum Nitec or Diploma in Mechanical , Chemical Engineering or any revelant field .
• Able to work 12 hours rotating shifts

Benefits and Welfare

• Shift allowance
• Transport allowance
• Night shift allowance