Job Description:

• Handle lab samples, sorting, simple data entry

Job Requirements:

• Min N/O level and above
• No working experience is required as on-the-job training is provided

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

Responsibilities:

• Oversee daily operations of the laboratory, and conduct scientific analyses of the precious metals content.
• Oversee the setup of laboratories.
• Maintain hygienic procedures of the laboratory.
• In-charge with ensuring the maintenance analytical and laboratory equipment.
• Provide team members instructions on preparation of conducting test precious metals.
• Establish the company's standard operating procedures for analysis and testing.
• Oversee the development of testing and analytical techniques for the testing and refining of gold and silver.
• Work closely with the business team and other team members.
• Taking part in the hiring process and retaining of lab staffs.

Requirements:

• Degree in Chemistry or equivalent.
• At least 5 years of experience in laboratory management.
• Prior experience with ICP & XRF and at least 3 years of experience performing ICP & XRF.
• Have expertise in gold and silver detection and recovery and refining technology is advantageous.

Interested candidates who wish to apply for the advertised position, please send in your resume to [email protected].

EA License No: 13C6305

Reg. No.: R24120209

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Role :

Perform engineering duties in equipment installation, testing and after sales service.

Responsibilities:

· Carry out on site equipment installation, testing and commissioning

· Perform maintenance, trouble shoot and repair of environmental machinery and system

· Work in accordance with project scope and schedule

· Any other duties as assigned

Job Requirements:

• Candidate must possess at least ITE certificate (Nitec) / Diploma in mechanical or electrical fields / alternatively, candidates who possess relevant qualifications and experience in machine trouble shooting and repairing
• Knowledge in machine assembly, pneumatic, electrical, control panel wiring and assembly is an advantage
• To be involved in machine installation and commissioning
• Minimum 3 years of working experience
• Possess valid Class 3 driving license is an advantage
• Able to work independently and self-motivated
• Able to work well as a member of a team
• Good interpersonal and communications skill

Working location: Tai Seng

Remuneration packages commensurate with qualifications and relevant working experience.

Interested candidates are invited to email your detailed resume indicating expected remuneration, date of availability, together with a photo to [email protected]

(Only shortlisted candidates will be notified)

(Through your response to our job advertisements, via any channels, you have agreed to register, authorise and give consent to Crescendas Group of Companies to collect, use and disclose your personal data under the PDPA 2012 Singapore for the purpose of your application for employment with our Company. If your application is not successful, your data will be kept in our database for future review.)

Responsibilities:

• Manage and oversee construction projects from start to finish.
• Coordinate and collaborate with project teams, subcontractors, and suppliers.
• Ensure compliance with safety regulations and procedures.
• Monitor and manage project progress according to schedules and budgets.
• Review and approve construction design drawings and specifications.
• Conduct regular inspections and quality control checks on construction activities.
• Resolve any issues or challenges that may arise during construction.
• Prepare and submit progress reports to project management.
• Ensure proper documentation and record-keeping of construction activities.

Requirements:

• Degree in Construction Management, Engineering or equivalent
• At least 5 – 8 years of experience in project engineering with supervisory background
• Prior experience in a construction industry is preferred

Interested candidates who wish to apply for the advertised position, please send in your latest resume to [email protected].

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Hands on production & assembly work in accordance to work instructions & safety regulations.
• Perform verification tests at sub assembly levels & failure analysis.
• Ensure preventive & corrective measures are in place.
• Maintain good production records & housekeeping.
• Able to work independently and closely with Engineering & Project Team for feedback on issues, progress & productivity.

Requirements:

• NITEC or Technical Education in Electrical Engineering.
• Preferably 2 years' relevant working experience.
• Able to use basic production jigs & tools.
• Possess good communication & organizational skills.
• Good problem-solving skills & constantly seek improvement to increase productivity.

Candidate with the following requirements will be advantageous (not a necessity):

• Experience in Electrical field.
• Hands-on soldering & assembly works.
• Worked with liquids & sealants.
• Meticulous & good with handwork & small components.

Others:

• 5.5-day (alternate Saturday) work week.
• Training will be provided.

Pratt & Whitney is a world leader in the design, manufacture and service of aircraft engines, and auxiliary power units. It offers a broad product portfolio that includes commercial aircraft jet engines, commercial turboprop engines, military aircraft engines, business and general aviation jet and turboprop engines, helicopter turboshaft engines.

Pratt & Whitney in Singapore is a global center of excellence with the most comprehensive service offering outside of the U.S. Located in key industrial areas of Loyang, Seletar and Tuas, the Pratt & Whitney companies operating in Singapore include: Component Aerospace Singapore, Eagle Services Asia, P&W NGPF Manufacturing Company Singapore, Pratt & Whitney Canada (SEA), Pratt & Whitney Component Solutions, and Turbine Overhaul Services. Pratt & Whitney has been operating in Singapore for more than 30 years, making it one of the pioneers in the development of Singapore’s world-class aerospace industry.

Responsibilities:

• Able to set-up, operate and maintain Shot Peen/ Media Finish / Balancing machines
• Able to perform simple troubleshooting of machines
• Possesses Conventional machining, peening, inspection skills and knowledge
• Read and follow established procedures and work instruction
• Responsible for performing an assessment of risk of his/ her activities, taking corrective and preventive actions
• Require to maintain day to day 6s activities.
• Willing to work cross-functional areas.
• Compliance with Company Code of Ethics and Export regulation
• Support and participate in EH&S, Quality & CORE activities
• Involve in continuous improvement and cost saving initiatives
• Additional tasking as required by the supervisor

Requirements:

• Minimum NITEC in Precision/ Aerospace/ Mechanical Engineering
• 2 years of relevant working experience in Shot Peening/ Media Finish/ Balancing preferably in aviation industry
• Able to work weekly rotating shifts / permanent 2nd and permanent 3rd shift

Why Join Us

• We drive innovation to go beyond with a purpose to transform aviation.
• We grow our people to become leaders with talent & leadership programs.
• We offer employee scholarship program for further education.
• We care for your well-being with comprehensive health, medical & dental benefits.
• We provide island-wide company transport from major MRT stations.
• We provide structured on-the-job trainings and in-house/ external certifications.
• We value trust, safety, integrity, respect, safety, innovation and excellence.
• We provide annual wage supplement (AWS) and variable bonus plan.
• We provide shift & meal allowances (Shift work only).
• We provide overtime benefits as applicable (Shift work only).
• Our ethos is “We Succeed, Together”.

Pratt & Whitney is a world leader in the design, manufacture and service of aircraft engines, and auxiliary power units. It offers a broad product portfolio that includes commercial aircraft jet engines, commercial turboprop engines, military aircraft engines, business and general aviation jet and turboprop engines, helicopter turboshaft engines.

Pratt & Whitney in Singapore is a global center of excellence with the most comprehensive service offering outside of the U.S. Located in key industrial areas of Loyang, Seletar and Tuas, the Pratt & Whitney companies operating in Singapore include: Component Aerospace Singapore, Eagle Services Asia, P&W NGPF Manufacturing Company Singapore, Pratt & Whitney Canada (SEA), Pratt & Whitney Component Solutions, and Turbine Overhaul Services. Pratt & Whitney has been operating in Singapore for more than 30 years, making it one of the pioneers in the development of Singapore’s world-class aerospace industry. Learn more at prattwhitney.com.

Responsibilities

• Set up and standardize equipment, process parts, interpret and evaluate for acceptance or rejection and document results in accordance with procedures.
• Familiar with the scope and limitations of the method in which certified and as directed, be capable of providing the necessary guidance to trainees and Level 1 personnel.
• Familiar with the codes, standards, and other contractual documents that control the methods including the scope and limitations of each technique/method.
• Conduct system performance checks in accordance with applicable process standard.
• Develop and manage procedures and inspection technique (sheets) for NDT Level 3 approval.

Requirements

• Minimum Diploma in Mechanical Engineering, Electrical Engineering or any other related discipline.
• Possess at least 400 hours of performing FPI (Fluorescent Penetrant Inspection)-Aerospace and at least 2 year of experience in dealing with aircraft structures, engines and/or components, or acceptable alternative training or experience.
• Possess experience in P&W FPM Code 07 and ASTM 1417 Type 1 D4 a/d specifications.
• Possess certification of a current NAS410 / EN4179 / PCN / ASNT or SNT-TC-1A.
• Possess basic knowledge of product manufacturing, inspection technology and aircraft engine maintenance.
• Possess good working knowledge of MS Office application (Word, Excel and PowerPoint) and possess working knowledge of SAP.
• Able to display Continuous Improvement and multi-tasking competencies.

Why Join Us

• We drive innovation to go beyond with a purpose to transform aviation.
• We grow our people to become leaders with talent & leadership programs.
• We offer employee scholarship program for further education.
• We care for your well-being with comprehensive health, medical & dental benefits.
• We provide island-wide company transport from major MRT stations.
• We provide structured on-the-job trainings and in-house/ external certifications.
• We value trust, safety, integrity, respect, safety, innovation and excellence.
• We provide annual wage supplement (AWS) and variable bonus plan.
• We provide shift & meal allowances (Shift work only).
• We provide overtime benefits as applicable (Shift work only).
• Our ethos is “We Succeed, Together

Duties & Responsibilities

1. Install and configure network operating system (NOS) and software application for computing devices.
2. Repair and Maintain IT hardware.
3. Diagnose and troubleshoot NOS and installed application.
4. Provide basic user training of company system.
5. Audit IT hardware and software inventory.
6. Provide onsite IT support.
7. Carry out any other duties as and when assigned by the immediate supervisor or higher management.

Qualification & Experience Generally Required

1. Higher NITEC in Information Technology or equivalent qualification
2. 1 years working experience in relevant field (Desktop Support) or no experience

Position: Watch Technician

Salary: $4,000 - $5,000 + AWS + Variable Bonus
Location: Central
Working Hours / Days: Mon – Fri, 09.00AM to 06.00PM

Responsibilities:

• Utilize in-depth knowledge of mechanical watch movements to solve technical challenges.
• Perform maintenance and repair tasks on various watches models.
• Diagnose issues accurately and implement effective solutions to restore functionality.
• Contribute to the development and refinement of new watch models and mechanisms.
• Assemble and fine-tune complex mechanical movements with precision and care.
• Conduct quality control checks at various stages of the assembly process.
• Address customer concerns and inquiries related to the mechanical aspects of their timepieces.

Requirements:

• Possess a GCE “O” Level or equivalent.
• Minimum 2 years of relevant working experience in diagnosing and repairing various types of watches, including mechanical, automatic, and quartz.
• Prior experience in retail industry will be added advantage.
• Candidates with Professional Certification in CW21, SAWTA, WOSTEP, FHH will be an added advantage.
• Passion for horology and commitment to continuous learning and improvement.

Interested applicants, please click the apply button to submit your application.

Alyson Ong
Dynamic Human Capital Pte Ltd
Registration No: R22107466
License No: 12C6253

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

About Veolia

Veolia Group aims to become the benchmark company for ecological transformation. Present on five continents with nearly 213,000 employees, the Group designs and deploys useful, practical solutions for the management of water, waste and energy that are contributing to a radical turnaround of the current situation. Through its three complementary activities, Veolia helps to develop access to resources, to preserve available resources and to renew them.

In 2022, the Veolia group provided 111 million inhabitants with drinking water and 97 million with sanitation, produced nearly 44 million megawatt hours and recovered 61 million tonnes of waste.

About Veolia Singapore

At Veolia Singapore, we're more than the world’s leading provider of environmental solutions - we’re dedicated to customized, cost-effective solutions that reflect best practices, environmental protection and a better quality of life.

We help customers in the industrial, commercial and governmental sectors safely manage, treat, recycle and dispose of hazardous and regulated wastes. Our industry leading team is equipped with unmatched knowledge, experience and technology in order to provide value-added services that protect people and the environment.

Are you passionate about making a positive impact on the environment and promoting ecological transformation? Come, join us and embark on a rewarding career with Veolia Singapore!

Job Description:

In this role, you will provide support to the Engineer/Manager and work together with the Operations and Maintenance team to achieve operational excellence in wastewater treatment facilities and related infrastructures.

• Routine monitoring of the plant to do visual inspection of equipment and structure.
• Routine check of parameters and registering in log sheet; log sheet preparation.
• Operating the plant various process with HMI/SCADA system.
• Control and monitor the water treatment quantity and quality as well as the quality along the plant upstream process.
• Ensure all permits to work (PTW) are carried out in accordance with company's policy.
• Taking corrective actions during the process parameters deviation.
• Document/Digitalize operation data on a daily basis for engineers to do decision /making/analysis. Assist in plant operation normalisation and ad-hoc on-site checking of equipment process.
• Support plant maintenance activities.
• Chemical receiving, chemical preparation, plant housekeeping, etc.
• Support any other site activities as delegated by the Engineer or Manager.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine.
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• At least NITEC in Engineering discipline
• Entry Level candidate are encouraged to apply
• Class 3 driving licence/Forklift driving licence an added advantage
• Able to work 44 hours week, may require to work on regular hours or 12 hours rotating shift
• Good chemistry will be advantageous
• Self-motivated and able to handle wide spectrum of responsibilities

Description:

• Completing and reviewing work assignments and adjusting workload and resources periodically with the team.
• Mentoring and cross-training staff with a standardized training program and documentation.
• Implementing required quality management systems to ensure customer work scope, results, and team performance meet approved SOPs and organization's safety and quality requirements.
• Participating in cost, quality, and efficiency improvement initiatives driven by the Team Lead.
• Coordinating and ensuring timely calibration of laboratory equipment.
• Maintaining good laboratory housekeeping with the team.
• Perfume compounding and material selection as per formulation.
• Updating compounding information in the Electronic Lab Notebook.
• Ensuring clean tools are used for weighing.
• Preparation for odor evaluations.
• Maintaining End-to-End (E2E) service of material management.
• Supporting the shipping of compounded materials with complete shipping documents.
• Operating and maintaining the Contexa robot

Requirements:

• Min. Diploma in Applied Chemistry / Perfumery and Cosmetic Sciences / Chemical Engineering
• Min. 1-2 years of working experience in a chemistry laboratory environment

Location: Buona Vista

Working hours: Office hours, Mon to Fri

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

We are hiring Part time/Contract Lab Assistants to be outsourced to our clients from reputable healthcare organizations.

Apply now!

Job Responsibilities

• Handle lab samples
• Sorting
• Simple data entry

Job Requirements:

• Min N/O/A levels and above
• Able to commence on short notice

All Interested candidates are invited to email your resume in MS Word format to:
[email protected]

Please include your full working experience, education background, notice period, expected salary.

Natalie Chew Shi Qian

Outsourcing Team

Ref Code: #HGNT

Recruit Express Pte Ltd

Company Reg. No. 199601303W | EA License Number: 99C4599

We regret to inform that only suitable candidates will be shortlisted for an interview

Job Scope:

• Assist in specimen reception
• Assist in lab operations
• Other ad-hoc duties assigned

Requirements:

• Min GCE N/O/A Levels or Diploma in every fields
• Able to commit during weekends and public holidays

Interested candidates can write in to Ann at [email protected]

Ann Goh Xin Ting
R1875289

Recruit Express Pte Ltd
E.A License: 99C4599

Jobscope Includes:

1) Aircon Servicing

2) Aircon Troubleshooting, Diagnostic, and Repair

3) Class 3 license will be good

4) Have working experience in Agent (manufacturer) will be an added advantage

5) Have experience in checking Splits, Multi Split, VRF, VRV systems

6) Independent in work

7) Good team player

Pratt & Whitney is a world leader in the design, manufacture and service of aircraft engines, and auxiliary power units. It offers a broad product portfolio that includes commercial aircraft jet engines, commercial turboprop engines, military aircraft engines, business and general aviation jet and turboprop engines, helicopter turboshaft engines.

Pratt & Whitney in Singapore is a global center of excellence with the most comprehensive service offering outside of the U.S. Located in key industrial areas of Loyang, Seletar and Tuas, the Pratt & Whitney companies operating in Singapore include: Component Aerospace Singapore, Eagle Services Asia, P&W NGPF Manufacturing Company Singapore, Pratt & Whitney Canada (SEA), Pratt & Whitney Component Solutions, and Turbine Overhaul Services. Pratt & Whitney has been operating in Singapore for more than 30 years, making it one of the pioneers in the development of Singapore’s world-class aerospace industry.

Responsibilities:

• Able to set-up, operate CNC (5 Axis) machines.
• Able to perform simple troubleshooting of machines.
• Possesses CNC / Conventional machining, inspection skills and knowledge
• Read and follow established procedures and work instructions.
• Able to interpret basic blueprint if required.
• Responsible for performing an assessment of risk of his/ her activities, taking corrective and preventive actions.
• Require to maintain day to day 6s activities.
• Willing to work cross-functional areas.
• Compliance with RTX Code of Ethics and Export regulation
• Support and participate in EH&S, Quality & CORE activities
• Involve in continuous improvement and cost-saving initiatives

Requirements:

• Minimum NITEC in Precision/ Aerospace/ Mechanical Engineering
• Minimum 2 year of relevant working experience in CNC Machining, preferably in aviation industry, open to other manufacturing/MRO companies.
• Training will be provided
• Able to work weekly rotating shifts

Why Join Us

• We drive innovation to go beyond with a purpose to transform aviation.
• We grow our people to become leaders with talent & leadership programs.
• We offer employee scholarship program for further education.
• We care for your well-being with comprehensive health, medical & dental benefits.
• We provide island-wide company transport from major MRT stations.
• We provide structured on-the-job trainings and in-house/ external certifications.
• We value trust, safety, integrity, respect, safety, innovation and excellence.
• We provide annual wage supplement (AWS) and variable bonus plan.
• We provide shift & meal allowances (Shift work only).
• We provide overtime benefits as applicable (Shift work only).
• Our ethos is “We Succeed, Together”

The jobscopes include:

1) Service of Airconditioner

2) Repair of Airconditioner

3) Good checking, trouble shootings skill in splits, and multisplit type aircon

4) Possess Class 3 License will be an added advanage

5) Have working experience in Agent (Manufacturer) will be added advantage

6) Good Team Player

• Position : Automotive Technician/Car Mechanic
• Location : Sin Ming Drive (Nearest MRT: Brighthill)
• Working hours : 5.5 Days Monday-Friday: 9am-6pm, Saturday 9am-2pm
• Salary (commensurate with experience) : Up to $3000 + AWS + Performance Bonus + 14 Days Annual Leave
• Duration : Permanent
• Industry : Automotive/Automobile

Main Responsibilities:

• Carry out maintenance servicing and repair of motor vehicles
• Conduct diagnostic checks, troubleshooting, automatic transmission and engine overhaul
• Perform quality checks and road tests on vehicles
• Liaise with Service Advisors on service/repairs-related matters
• Provide support to customer service and workshop
• Maintain facilities and equipment of the workshop
• Any other or ad-hoc assignments by the Workshop Manager

Requirements:

• Possess relevant certificates in Automotive Engineering or its equivalent
• Have minimum 3 years of relevant working experience in automotive industry
• Have working knowledge of mechanical, electrical and electronic components of various makes and models of vehicles
• Have working knowledge of vehicle diagnostic systems and methods
• Bilingual in English and Mandarin to converse with Mandarin speaking associates

Email to: [email protected] or call me at: 6398 5682 for more information.

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Diana Okta Tio

Associate Consulting Director (APAC)

Reg no.: R2094678

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Objective:

Perform production support activities according to EHS guidelines and in a cGMP compliance manner following procedures and instructions.

Major Accountabilities:

• Involve in hands-on execution of the production support and trouble-shooting
• Perform production support activities such as small parts cleaning, autoclaving, area cleaning and housekeeping, equipment surface cleaning, materials/consumables transfers and management of production storage locations
• Support continuous improvement initiatives
• Participate in GMP and Safety audits
• Train team members on-the-job
• Adhere to any applicable EHS requirements
• Commit to a fair and respectful relationship to others and behave in accordance with Novartis Values and Behaviors

Key Performance Indicators:

• Conformance to production, project schedule, measured in time
• Number and severity of process deviations
• Able to collaborate effectively, both internally and externally
• No avoidable HSE and Quality incidents

Job Responsibility:

• Workplace is in Micron's Distribution operation with ASRS, Cleanroom operations, Packaging operations.
• Follow engineer instruction to perform routine maintains & repairs equipment used in warehouse and cleanroom as to ensure that equipment runs optimally.
• Assists engineer to collect data for the equipment performance improvement & evaluation
• Assists engineer on Installation and Qualification of equipment used in the warehouse & cleanroom
• Assists the Equipment Engineer on Calibration, Safety, Quality and Efficiency of equipment at the warehouse.
• Participates in Continuous Improvements Program (CIP), Safety Good Catch & Quality Process
• Responsible for day-to-day trouble shooting of warehouse equipment, and clearance of jams and providing equipment assist.
• Assists in machine, risk assessment documentations
• Supports regular maintenance, cleaning, calibration of equipment
• Collect data from equipment and make continual improvements with Engineer's guidance, in the area of machine performance

Job Requirement:

• ITE/Diploma holder with relevant technical discipline
• Training will be provided using buddy system and coaching from engineers.
• Compensation will commensurate with experience

Description

• Responsible for carrying out daily pest control activities according to operational schedule
• Monitors and responds to customers’ feedback
• Provides oral and written feedback on work activities
• Uses equipment, chemicals, and pesticide/insecticide products
• Performs any other related duties as instructed by the immediate superior.

Requirements

• Must possess an NEA Vector Control License
• Must possess a Singapore Class 3 driving license

☑ $ 2800 - $3500 + Good Benefits & Attractive Bonuses !!

☑ Semiconductor Equipment Top 10 Supplier – MNC

☑ East Area - 4 mins walk from DTL

☑ 5 Days, 8.30am – 5 : 00pm.

☑ Cleanroom Experience + own transport highly advantageous !!

Main Duties

• Machine setup, installation, servicing, troubleshooting & repair.
• Handle Jigs and report writing.
• Provide training and support to customers fab on equipment usage.
• Perform standby and ad-hoc duties as required.

Job Requirement

• NITEC, Diploma in Electrical, Electronic or Mechatronics.
• Able to work irregular hours & standby duty.
• Semiconductor or automation background highly advantage !
• Candidates without experience are welcome to apply, training provided !!

Interested applicants are welcome to apply online with updated Resume/CV via Apply Now button or email to [email protected]

Only shortlisted candidate will be notified

Kam Soo Leng, Yvette

Registration: R22107492

Company’s Profile:

Headquartered in the US and established as the largest companies in the semiconductor industry, they are currently looking for enthusiastic individuals to join their expanding team.

Fresh graduates with no experience but have a passion to join the semiconductor field are welcome to apply. Training will be provided.

Work location: Woodlands

Working hours: 5 days swinging shift OR 12 hours shift

Company benefits:

• Guaranteed AWS
• Performance bonus
• Increment after probation (subject to performance)
• 1 year completion bonus

Job Responsibilities:

• Follow on site daily Preventive Maintenance plan.
• New & old parts arrangement & logistic (maintenance room, store to tool side).
• Preparation & housekeeping of PM jigs & tools.
• Perform robot PM: parts cleaning & greasing, replacement of sensors, motors, motor drivers etc.
• Installation of vacuum valves, fore line pipes, heater jackets.
• Support tool owner engineer to do technical activities in fab: trouble shoot, modification, installation, de-installation.
• Support 6S & logistic activities (parts cleaning, arrangement, labelling, housekeeping.

Requirements:

• Nitec/Diploma in any Engineering discipline or equivalent
• Willing to do hands-on work and comfortable to be in cleanroom suit
• Work experience in semiconductor industry will be an added advantage
• Able to work on weekends

Interested candidates may whatsapp your resume to 8494 1966. Only shortlisted applicants will be contacted.

Cassie Chan | R2197426

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Responsibilities:

• Perform maintenance and repair tasks on various equipment and machinery.
• Diagnose technical issues and provide solutions to ensure efficient operation.
• Conduct routine inspections to identify potential problems and prevent breakdowns.
• Install and set up new equipment according to specifications.
• Collaborate with team members to complete service tasks within deadlines.
• Maintain accurate records of service activities and performed repairs.
• Adhere to safety protocols and guidelines at all times.

Requirements:

• Diploma or Nitec in Electrical Engineering or equivalent.
• At least 1 year working experience as a service technician preferred.
• Strong technical knowledge and troubleshooting skills.
• Ability to read and interpret technical manuals and diagrams.

Interested candidates who wish to apply for the advertised position, please send in your latest resume to [email protected].

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Our client is one of the leading pharmaceutical ophthalmic solutions manufacturers in the world, dedicated to providing sterile pharmaceutical ophthalmologic solutions, from prevention to delivery of care at every touchpoint, advancing wellness in hospitals, clinics and home-care sectors.

Responsibilities:

Responsible for machine operation, breakdowns, troubleshooting, preventive maintenance, equipment servicing, and routine daily servicing.

Conduct daily for routine maintenance works that execute by engineering engineer or manager.

Daily update and record machine checklist for machinery and utility equipment.

Conduct weekly spare parts checking and update to superior.

Daily cleaning of workshop area.

Weekly assist to conduct air conditioning & cooling tower cleaning and checking.

Weekly conduct cleanroom machine and automation equipment greasing and cleaning.

Requirements:

Preferably at least NITEC in Electrical / Mechanical / Mechatronic Engineering/ Facility Management or related course

Minimum 1-3 years relevant working experience in building/ facilities servicing and maintenance

Able to work shift (2 weeks rotate)

How to Apply:

Interested candidates, please submit your updated resume by using Apply Now button

**We regret to inform that only shortlisted candidates will be informed.**

Tan Zhi Ning

Registration Number: R23116771

EA License No: 18C9027

Location: Ang Mo Kio

Working Hours: 8.30 am to 5.30 pm.

Salary: Up to $3300 + Transport Allowance + AWS + OT Pay

Job Description:

• Survey and provide advice towards vehicle concern
• Troubleshooting on site and site recovery (if possible)
• Submission of report upon case recovery
• To support on testing of equipment and diagnosis
• Setup test environment as and when required
• To perform OBU installation on actual vehicle when required

Requirement:

• Minimum in Nitec in Automotive Engineering or equivalent
• Class 3 Driver License

Grace Koa
Reg No.: R23115224
EA Licence no.: 21C0845