Preventive system maintenance

- Hydraulic/Mechanical/Electrical support (Setting up, troubleshooting, repairs and construct)

- Support R&D activities to develop, fabricate and build/upgrade new/existing ROVs

- Support data recording activities on jobs

- System launch and recovery

- Ability to work outdoors on-board ships, possess a level of physical fitness appropriate to the job requirements, and able to work irregular shifts hours (when required) based on operations schedules.

- To assist with ROV operations as instructed and in accordance with approved procedures and policies.

- To perform remote vehicle and possess positive, hands-on systems maintenance, electrical, mechanical and hydraulic repair of the ROV and various ancillary systems

The Pharmacy Technician assists in drug stock management, maintenance of premises and equipment, prescription processing, as well as drug dispensing and distribution. He/She is responsible for assisting the pharmacy manager and/or pharmacist inthe provision of pharmaceutical care. He/she interacts with patients and their family, and other health care providers as appropriate to assure continuity ofservices and to achieve desired patient outcomes through safe, accurate andtimely distribution of pharmaceutical drug supplies. The pharmacy technician coordinates and performs as necessary the activities of a pharmacy service area. He/she dispenses drugs under the general supervision of pharmacists.

The Pharmacy Technician will assist in procurement, inventory control of pharmaceutical products which include daily dispensing, discharge counselling, medication reconciliation and resolving medication related issues, assists in daily operations of the pharmacy, assist in preparing inventory, prescription intervention, billing, and reports.

Job Responsibilities

• To perform the full spectrum of pharmacy services from procurement, inventory management, distribution, billing, reconciliation, dispensing and medication education.
• To assist in research, quality assurance and improvement programs.
• To assist in the compiling and analysis of data e.g. medication near misses, procument, adjustments and audits.
• To assist in the training, supervision and mentoring of new staff, junior staff, volunteers, and attachment students.
• Housekeeping of the pharmacy.
• To perform other duties as may be required.

What you might need to have:

• Possess a Diploma in Pharmaceutical Sciences or Pharmacy technician certificate.
• Basic knowledge of common medications.
• Relevant experience in hospitals will be an added advantage.
• Open to fresh graduates with the relevant certificates (with internship experience in hospital and dispensing experience are preferred)
• Proficient in Microsoft Office.
• Meticulous, good team player with excellent communication skill.
• Service orientated.

Job Responsibilities:

• Installation, termination and performing the electrical wiring for control panel, instruments and machine per drawing.
• Assembly and installation of the components and fittings.

Multinational corporation
Basic + AWS + Variable Bonus + Overtime
Good benefit & welfare including medical insurance

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Job Requirements

• Act as first level support for the factory automation team.
• Attend to day-to-day systems issues, perform troubleshooting systematically and come out with solutions.
• Coordinate with equipment and process engineering team to ensure data collected by business systems is accurate, relevant, and critical for monitoring purposes.
• Assist in providing briefing, guidance, and training to end user on the implementation of new feature or enhancement developed by automation team.
• Participate in system enhancement initiatives by collecting user feedback and suggest improvement idea, potentially helping to develop and implement them.
• Create and document best practice on using automations systems for end user.
• Support system testing activities on machine by automation engineer.
• Manage server, computer that fall under automation team responsibility.
• Actively demonstrate a passion for continuous learning.
• Any Other ad hoc duties as assigned.

Job Responsibilities

• Minimum NITEC or Diploma in engineering or related fields.
• Entry level candidates are welcome to apply.
• Must be able to commit to perform 12 hours rotating shift and work in cleanroom environment.
• Good communication and documentation skills
• Strong problem solving and systems issues troubleshooting skills.
• Good Team Player and able to work independently.

Following Requirements are a plus:

• Working experience in Clean Room.
• Experience with SECS/GEM Equipment Automation.
• Basic programming skills with Python

Job Descriptions:

• Use specialized equipment to test and validate cells, modules, and hybrid gearbox components under electrical, mechanical, and thermal stress conditions.
• Conduct complex destructive testing and collect data from various sensors.
• Perform post-testing teardown inspections and gather data for further analysis.
• Maintain and calibrate test equipment and data collection tools.
• Troubleshoot data acquisition systems and sensors.
• Collaborate with cross-functional teams on sample preparation, building, and instrumentation.

Job Requirements:

• Minimum NITEC/ Certificate/ Diploma in Automotive Engineering/ Mechanical or equivalent
• Valid Driving License
• Candidate with relevant experiences in handling passenger car is a plus

We regret that shortlisted candidates will be notified.

Name: Teoh Xue Ling

Registration No.: R22107190

EA License No.: 02C3423

Responsibilities

• Responsible for the maintenance of XDC utilities systems, including chillers, boilers
• Perform planned preventive maintenance and emergency maintenance, ensuring all work is recorded in work orders.
• Conduct hands-on repair work as needed.
• Participate in project phases, including identifying discrepancies during walk-downs and leading utility commissioning phases.
• Update SOPs, URS, or other relevant documents as needed.
• Mentor and coach junior engineers to support their development.
• Perform other tasks as assigned by leadership.

Requirements

• Diploma or higher in Mechanical, Electrical, Automation, Pharmaceutical Engineering, or related fields; candidates with equivalent work experience are also considered.
• Ability to quickly learn and understand relevant codes and requirements.
• Strong communication and comprehension skills.
• A positive attitude, strong work ethic, and a willingness to follow leadership instructions.
• Openness to temporary work assignments, including overtime on weekends or weekdays, as needed.
• Ability to work independently with minimal supervision in a fast-paced environment.
• Strong multitasking and prioritization abilities.

JOB OVERVIEW

The Calibration Lab Technician is responsible for performing calibration, testing, and verification of equipment and instruments in the areas of dimensions, mass, force, and torque. The role ensures adherence to strict quality and regulatory standards to maintain precision and accuracy in measurements.

KEY RESPONSIBILITIES

• Perform calibration and verification of measuring instruments and devices related to dimensions, mass, force, and torque in laboratory or client site as required.
• Operate and maintain precision instruments, including micrometers, weights, force gauges, torque testers, and dimensional tools etc.
• Conduct routine testing and quality checks on lab equipment.
• Prepare detailed calibration certificates and reports in compliance with ISO/IEC 17025 standards.
• Maintain accurate calibration records and ensure traceability to national or international standards.
• Ensure proper maintenance and cleanliness of calibration equipment and the lab environment.
• Troubleshoot, repair and adjust instruments as necessary to meet calibration specifications.
• Follow safety protocols and maintain compliance with all relevant quality management systems.
• Stay updated on industry standards and methodologies related to calibration.
• Work collaboratively with engineers and other team members to meet customer requirements.

PREFERRED SKILLS

• Proficiency in handling precision measuring instruments.
• Knowledge of calibration software and tools is an advantage.
• Strong attention to detail and problem-solving abilities.
• Good communication and interpersonal skills.
• Ability to work independently and as part of a team.

Position Summary

To provide efficient after-sales technical services and support, including assembly, pre-delivery inspection, delivery, installation and commissioning, trouble-shooting, maintenance and servicing of equipment and its related parts.

Job Responsibilities

Technical Support, Quality and Service Standards

• Responsible for the successful completion of scheduled service jobs & ad hoc troubleshooting.
• Perform and complete all service jobs as assigned, ensuring equipment is in good condition before handing over to customer.
• Work in co-operation with supervisor, colleagues and vendors to fulfill job requirements and resolve technical problems in meeting the expectations of external customers.

Records and Documentation

• Responsible for recording and providing accurate and complete service reports upon completion of every service jobs or visits to facilitate follow up and/or warranty claim where appropriate.
• Prepare and upkeep all equipment related documents in accordance with the documentation system and procedure of Industrial Services.

EHS and Housekeeping

• To maintain proper housekeeping and discipline at workplace as well as the client's work site so as to improve operational efficiency, whilst maintaining the good image of the Company.
• To observe safety precautions and to execute correct engineering practices at all times so as to minimize risk to self and others as well as damage to equipment and workplace.
• Act responsibly at all times to comply with the Environment, Health and Safety (EHS) policies, procedures and work instructions of the company.
• Able to produce Risk Assessment (RA) for related jobs at site.

Job Requirements

• Certificate or Diploma or in an Engineering disciplines.
• Minimum 3 years in machine maintenance and troubleshooting.
• Proficient in MS Office applications preferred
• Able to interpret Electrical diagram and knowledge on instrumentation & Control
• Fluent in both written and oral English
• Have good discipline and work attitude
• A good team player

Working Location

• Changi Loyang

Our client is transforming the cleaning industry with advanced robotic solutions that tackle manpower challenges. Their innovative robots are already making a difference in 30 countries. As they continue to grow, they are seeking a Service Technician to join their team. The position may require you to travel to different countries within the Asia region.

Key Responsibilities:

• Provide technical assistance during product demonstrations and sales trials to help customers understand our cleaning robots.
• Train customers on how to use and maintain our cleaning robots, and certify them for proper operation.
• Address technical inquiries, quickly identify issues, and troubleshoot robot malfunctions to ensure minimal downtime and maintain customer satisfaction.
• Work with internal teams to address and solve robot issues, both on-site and for factory returns.
• Stay updated on the latest robot technologies and use this knowledge to assist customers.
• Collect feedback to help improve the product and share insights with the R&D team.
• Travel to customer sites as needed for onsite support, training, and troubleshooting services.
• Assist with any additional duties assigned by the manager.

Requirements:

• Diploma or certificate in electrical, electronics, or mechanical engineering.
• 2-3 years in technical support or servicing, ideally in robotics or automation.
• Strong troubleshooting and problem-solving capabilities.
• Excellent communication and interpersonal skills for effective customer training and support.
• Ability to collaborate effectively with cross-functional teams.
• Up-to-date knowledge of the latest advancements in cleaning robot technologies.
• Must be willing to travel for customer support and training.
• Class 3 driving license is a plus.
• Interested candidates are invited to send in your Resume in MS Word Format stating your past work experience, reasons for each leave, past and expected remuneration.

We regret to inform that only shortlisted candidates will be notified.

By submitting an application to us, you will be deemed to have agreed for us to collect, use, and disclose your personal data which you have submitted to your prospective employers, for the purpose of job search, and/or other services which you have consented us to perform on your behalf.

Attn: Woo Gu Ming (R24123795)

Cultivar Asia Pte Ltd (MOM EA License: 19C8782)

* This is a 1 year contract role (subject to extension/conversion) *

Key responsibilities:

• Perform hands-on mechanical/electrical assembly tasks within the standard time
• Ensure that the assembled machine is according to Makino's quality standards
• Responsible for keying the operation time into EES for performance measurement
• Responsible for housekeeping and ensuring that the assigned machine area is clean and tidy
• Carry out duties in according with Quality Policy, EHS control procedures and WIS
• Ensure that all machine tools and instruments are properly calibrated and taken care of

Job requirements:

• Minimum NITEC/Higher NITEC in Mechanical/Electrical Engineering, or a related field
• Experience working in Assembly/Production is an added advantage
• Able to work shifts and commit to overtime on weekdays and weekends when required
• Able to handle physical work and stand for long hours
• Able to read and interpret drawings
• Have the initiative to learn and produce quality outcome
• Responsible and committed to the assigned task
• Team player and able to work independently

Job Description:

The Telecom Technician is responsible for mechanical completion, pre-commissioning, and commissioning activities.

To successfully complete these activities according to the project plan and schedule, the Telecom Technician should:

• Understand roles, responsibilities, and compliance requirements.
• Follow the project completion execution plan and the Notification of Energization (NOE) Flow Chart.
• Interpret system drawings and follow the Walk Down procedure.
• Submit a daily report for transparency with the Discipline Lead Technician.
• Attend daily toolbox talks for task briefings.
• Perform mechanical completion (‘A’ Scope ITRs) in collaboration with the construction team, adhering to project drawings and specifications.
• Execute pre-commissioning activities (‘B’ Scope ITRs) as per vendor documentation and specifications.
• Support Operation Test Procedures (OTP) under supervision.
• Use specific tools and test equipment safely and with quality assurance.
• Assist field service vendors in system commissioning.

Requirements

• Technical diploma in Electronics, Communication, Automation, Instrumentation & Control, or Electrical disciplines, or equivalent.
• Minimum 4 years of construction or commissioning experience in FPSO offshore projects and systems.
• Knowledgeable in Telecom Systems (PAGA, LAN, TV, Telephones, Radio, Radar, GPS, etc.) and installation/testing of communication cables (Ethernet, Fibre Optic, Antenna feeders).
• Proficient in installation, pre-commissioning, and commissioning of Telecom devices.
• Experienced in installation of indoor and outdoor telecom equipment, loop checking, and testing of telecom systems.
• Able to interpret engineering documents including datasheets, schematics, block diagrams, and loop drawings.

Registration No. :R1871121

EA License No.: 16S8067

Reza Johannes

• Shipyard working environment
• Knowledge on Marine and deck machinery service
• Hydraulic Pump and Hydraulic Motor service and testing knowledge
• Team work
• Willing to travel overseas at short notice
• Service report writting
• Communicating with customer
• Service work at workshop
• Workshop maintenance and tools keeping

• You will also perform receiving and sorting of specimens, assessing suitability of specimens for testing, data entry of test requests, and rejection of specimens that are unsuitable for testing.
• Performs laboratory testing for specimens in accordance to the policies and procedures as outlined in the work instructions
• Checks that results are accurate and investigates any delta flags / unusual results before certifying the results in a timely manner. Monitors and ensures that critical results are reported to the relevant healthcare personnel.
• Performs quality control on reagents, standards, controls, and all other testing materials and follows up with corrective actions, if required.
• Calibrates and maintains instruments to ensure proper functioning of the instruments.
• Troubleshoots instrument malfunction or unacceptable quality control results and initiates corrective action when necessary.
• Complies with the requirements set by the various licensing, regulatory and accrediting agencies. Participates in internal and external quality assurance programmes, e.g. CAP and RCPA.
• Participates in the department’s continuing education programmes, and the institution’s training and development programmes.
• Supports the Section Leader in operational and administrative matters.

Requirements

- Preferably Bachelor's Degree and above in Laboratory Medicine, Clinical Chemistry, Biomedical Sciences, Medical Laboratory Sciences, Medical Technology, Biological Sciences, Biotechnology, Life Sciences, or any other equivalent qualification.

For interested candidates, please send your updated resume:

1) Air-conditioner Servicing

2) Air-conditioner Troubleshooting, Diagnostic, and Repair

3) Class 3 license will be good

4) Have working experience in Agent (manufacturer) will be an added advantage

5) Have at least 5 yrs experience in checking Splits, Multi Split, VRF, VRV systems

6) Independent in work

7) Good team player

8) Able to work any shift

9) Able to work OT on weekends and public holiday

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

JOB OVERVIEW

The Calibration Lab Technician is responsible for performing calibration and maintenance of pressure and temperature measuring instruments in compliance with industry standards and customer requirements. This role ensures accuracy, reliability, and traceability of equipment used in industrial and scientific applications.

KEY RESPONSIBILITIES

• Perform calibration of pressure gauges, transducers, thermometers, thermocouples, thermohygrometer and other related instruments in laboratory or client site as required.
• Ensure all calibrations are conducted in compliance with ISO/IEC 17025 standards.
• Conduct routine testing and quality checks on lab equipment.
• Prepare detailed calibration certificates and reports in compliance with ISO/IEC 17025 standards.
• Maintain accurate calibration records and ensure traceability to national or international standards.
• Ensure proper maintenance and cleanliness of calibration equipment and the lab environment.
• Troubleshoot, repair and adjust instruments as necessary to meet calibration specifications.
• Follow safety protocols and maintain compliance with all relevant quality management systems.
• Stay updated on industry standards and methodologies related to calibration.
• Work collaboratively with engineers and other team members to meet customer requirements.

PREFERRED SKILLS

• Proficiency in handling precision measuring instruments.
• Knowledge of calibration software and tools is an advantage.
• Strong attention to detail and problem-solving abilities.
• Good communication and interpersonal skills.
• Ability to work independently and as part of a team.

- Assist Project Manager and Engineer to fabricate in the stage of setup the monitoring system;

- Installation and setup of instrumentation hardware;

- Liaise positively among the project team;

- Testing and carrying out the maintenance of the system;

- Site inspection is required for troubleshooting

- Ensure that works carried out are in compliance with the Workplace Safety and Health Act

- Perform any other technical tasks as and when required

• Perform analytical testing accurately and efficiently and in accordance to Standard Operating Procedures (SOPs).
• Perform equipment verification and calibration in accordance to procedures.
• Document all results in accordance to Good Manufacturing Practices (GMP) and Good Laboratory Practices (GLP) requirements.
• Conduct OJT training for new hires.
• Troubleshoot all operating deviations and issues and coordinate with other function when required.
• Perform chemical analysis using wet chemistry methods and analytical instrumentation, including HPLC, GC, particle size analyzer etc.
• Ensure that tests assigned are performed in a timely manner in accordance with validated test protocols and procedures.

For interested candidates, please send your updated resume:

Email: [email protected]

Whatsapp: 96503173

Telegram: @jesswongie

Jessie Wong Yuan Si

R2197171

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

Location: Singapore

Job Type: Full-Time

Working Hours: 5 day work week (Tuesday – Saturday)

Description:

We are seeking a motivated and reliable individual to handle window mesh installation projects.

Responsibilities:

• Perform installation tasks for household fixtures.

• Use basic handyman tools and equipment to carry out installations.

• Travel to different sites to carry out installation works.

• Attend to any defects that customers may have.

Requirements:

• Relevant practical experience will be advantageous.

• Ability to carry out installation with the use of basic handyman tools.

• Possess Class 3 driving license. Vehicle for transport will be provided.

• Training will be provided.

Job Responsibilities:

1. Installation and Configuration:

· Install, set up, and configure IoT devices and sensors in various cleaning equipment and facilities.

· Ensure proper connectivity and data transmission between IoT devices and central monitoring systems.

2. Monitoring and Maintenance:

· Continuously monitor the performance of IoT devices, identifying and troubleshooting technical issues.

· Conduct routine maintenance and firmware updates to ensure optimal functionality.

· Achieve high IoT uptime percentage, minimising downtime for maintenance and repairs

· Minimise response time to ensure prompt resolution and quick return to normal operations.

3. Data Analysis:

· Collect and analyze data generated by IoT devices to identify patterns, trends, and anomalies.

· Provide insights and recommendations based on data analysis to improve cleaning processes and efficiency.

4. Integration:

· Collaborate with software developers and engineers to integrate IoT data into cleaning management software

· Working on Ad hoc projects and other IoT related matters

Job Requirements:

• Minimum 1-2 years of experience in IoT, electronics, network admin or related field.
• Excellent communication skills.
• Proficiency in IT systems and networking.
• A customer service orientation and problem-solving mindset.
• Location: West (Bukit Batok)
• Working Hours: 5 Days Work Week (Mon – Fri)

- Assist Project Manager and Engineer to fabricate in the stage of setup the monitoring system;

- Installation and setup of instrumentation hardware;

- Liaise positively among the project team;

- Testing and carrying out the maintenance of the system;

- Site inspection is required for troubleshooting

- Ensure that works carried out are in compliance with the Workplace Safety and Health Act

- Perform any other technical tasks as and when required

Examining and maintaining electrical systems and equipment

Repairing electrical equipment and replacing malfunctioning components

Assembling new electrical components and equipment

Using hand tools for fixing wires and electrical appliances

Interpreting electrical circuit diagrams and blueprints

Analyzing unused electrical equipment and discarding the old ones

Coordinating and supervising the Electrician’s in day-to-day activities

Reviewing and ordering new electrical supplies

Adhering to the safety protocols while performing daily operations

Testing newly installed electrical equipment

Addressing any customer complaints and service requests

Reviewing and communicating approximate work completion timelines to clients

Undertaking regular maintenance checks and inspections

Electrical Technician Requirements and Qualifications

High school diploma or equivalent; associate degree in electrical engineering technology preferred

Valid electrician license in good standing

4+ years of experience working as an electrical technician

Extensive knowledge of electrical systems, wiring, and all necessary equipment

Able to read blueprints and technical drawings

Proficient with manual and power tools

Familiar with code requirements and company safety regulations

- Assist Project Manager and Engineer to fabricate in the stage of setup the monitoring system;

- Installation and setup of instrumentation hardware;

- Liaise positively among the project team;

- Testing and carrying out the maintenance of the system;

- Site inspection is required for troubleshooting

- Ensure that works carried out are in compliance with the Workplace Safety and Health Act

- Perform any other technical tasks as and when required

Roles & Responsibilities

The aircon technician will be involved in the maintenance, repair, and installation of different types of air conditioning systems. Aircon Technician will be involved in performing general maintenance services in households and offices all across Singapore, including washing aircon, diagnosing and rectifying issues in all brands and types of aircon, and installing and dismantling aircon. This role has the following responsibilities:
- Dismantle malfunctioning systems and replace worn out or defective parts.
- Perform chemical washes and chemical overhauls.
- Perform repair and maintenance on malfunctioning air conditioners.
- Perform general maintenance services on normally-functioning air conditioners.
- Prepare service reports after every completed job.
- Keep a record of job schedules.
- Pick up and deliver required materials and supplies as and when required.
- Communicate with clients with regards to problems in equipment and post-job reports.
- Perform any ad-hoc tasks given by supervisor or management.
This role requires the following skills
- Possess a CLASS 3 DRIVING LICENSE.
- Must be a confident driver and have experience driving medium-large-sized vans.
- Minimum 5 years experience working as an air conditioner technician performing chemical wash, general servicing, repairs, and installation.
- Experience working in CENTRALISED AIRCON SYSTEM maintenance is a big advantage.
- Confident at carrying out repairs and cleaning on all common aircon brands for wall-mounted, ceiling, casement, ducted, and portable aircon in Singapore including Daikin, Panasonic, Samsung, Mitsubishi Electric, Heavy Industries, Fujitsu, Toshiba, Carrier, and Europace.
- Able to speak and write basic English (excellent English is a strong advantage)
- Knowledge of electrical wiring.
- Able to do some heavy lifting and climbing.

- Willing to work on weekend shift

Job Description & Requirements

Roles & Responsibilities

Technician Responsibilities:

• Inspecting, analyzing, and troubleshooting systems and equipment.
• Carry out troubleshooting and minor repairs to building works and M&E works including air-conditioning, electrical, plumbing and fire protection system.
• Involved in coordination and supervisor of construction works
• Responsible for planning, managing and ensuring smooth implementation and monitoring of projects assigned
• Responsible for effective site management which include safety inspection and quality control of materials and plants on site
• Required to plan, lead and monitor progress and performance against the project plan whilst managing the day-to-day operational aspects of projects which includes manpower planning, construction progress monitoring, preparation of master schedule and cost control.

Technician Requirements:

• High school diploma.
• Experience as a technician.
• Ability to multitask and liaise with professionals in different fields.
• Ability to explain problems simply and clearly.
• Proficiency in MS Office.
• Ability to understand verbal and written instructions.
• Ability to follow health and safety regulations.
• Excellent mathematical and problem-solving skills.