Job Scope :

Troubleshoot, service, repair, and maintenance of commercial kitchen equipment (Hot / Cold) and facilities; which includes refrigerator, lighting, kitchen equipment and plumbing facility.

1. Perform equipment installations, commissioning, modification, troubleshooting, repair, servicing and other technical support.

2. Complete documents to verify work performed when necessary.

3. Ensuring all works compliance with appliance standards and Health and Safety Act.

4. Advise the management team of critical systems that could be hazardous.

5. Ensure adherence to company standards and customer satisfaction.

6. Other works related.

Requirements :

7. With or without experience

8. Willing to learn

9. Driving license(class 3) with a good driving record to operate a commercial vehicle will be a plus.

10. Good physical condition, Good attitude, Team player

11. Willing to work overtime on Sunday & Public Holiday will be a plus.

12. Working hours : Mon-Fri : 9am-6pm, Sat : 9am-1pm

Responsibilities:

• Handle Service and repair cases of ear pieces, In-The- Ear (ITE) Hearing Aids, Behind-The-Ear (BTE) Hearing Aids
• Handle Urgent custom made ear piece order
• Provide Support in logistics (i.e Packing)
• Trimming/ Filling Ear mold
• Need to perform soldering work
• Quality Check and testing of all out-going instruments
• Scanning Ear impression for custom made ear mold and ordering from Vietnam
• Maintain housekeeping for safe working environment
• Any other ad-hoc duties assigned by the supervisor

Requirements

• Min Diploma in Biomedical Engineering or any relevant field
• Training is provided
• Comfortable with a 6 months contract to perm role
• Working Days & Hours: Mon-Fri Office Hours
• Location: One North

Interested candidates, pleaseInterested candidates please send your updated resume to:

[email protected]
Attn: Senior /Testing Technician (Medical Device/ Taiseng) #HKA

We regret to inform that only shortlisted candidates will be contacted

EA Personnel: Kayley Ng Yin Yi (R1762843)
Company EA Registration Number: Recruit Express Pte Ltd (99C4599)

• Mon-Fri (8am-5pm; 12hrs shift applicable upon confirmation)
• Jurong Island (Company bus provided)
• AWS+VB+Allowance

Broad Functions:

To operate various stages of production such as Synthesis, purification, neutralization, and monomer recovery in a smooth and safe manner

Job Description / Responsibilities:

• Assists in general duties such as repacking and identification of unlabelled drums of waste chemical.
• Follow QESH-MS Work Procedures and SOP.
• Observe safety rules and 5S
• Ensure cleanliness of work area, upkeeps equipment and assists in maintenance program and operating of production machinery and equipment.
• Assists in loading and unloading of cargoes, carries out chemical waste sorting, waste transfer and stock keeping

Requirements:

• O-level or NITEC in Chemical Engineering or equivalent
• At least 2 years of relevant working experience in manufacturing background
• No disciplinary issues history
• Willing to work without shift at least 2 months
• Familiar with ESH regulations
• Hands-on and multi task

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to ref29"at"trustrecruit.com.sg or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lai Jun Leong (Cedric)

EA Personnel Reg No: R21102891

A*STAR is seeking an experienced Principal Investigator to lead the Sensory Science and Ingestive Behaviour Research, as part of the Clinical Nutrition Research Centre under the newly formed Singapore Institute of Food and Biotech Innovation (SIFBI).

https://www.a-star.edu.sg/sifbi

The PI position will lead research on Human Sensory perception, Consumer preference and Food intake behaviour within SIFBI as it relates to nutrition, health and new product innovation. The Sensory group interacts closely with the other technology pillars1 at SIFBI to provide support to new product development, ingredient and processing innovation and the impact of sustainable technology solutions to consumer acceptability, nutrition and well-being.

The candidate will lead a team of Sensory and Nutrition researchers based at the Clinical Nutrition Research Center, and will contribute to SIFBI’s overall corporate strategy. The appointee will develop strategic programs of research to ensure competitive and industry-relevant Sensory research activities are supported with sustained funding, and will integrate sensory, consumer and ingestive behaviour measures, interact with the taste receptor platform in order to integrate the SIFBI portfolio across the value chain, nurturing close collaboration with researchers within and beyond SIFBI, and the wider A*STAR family. In taking the lead of the Sensory team at SIFBI’s, the goal is to enhance consumer-centric research focused on Singapore’s national research priorities including Singapore 30/30 vision, innovation in alternative proteins, and applications of new food, and to support the ongoing publication of high quality original research to further enhance SIFBI’s standing in the field of sensory and consumer science.

Job Responsibilities:

The level of responsibility will be dependent on the candidate’s experience, and the primary responsibilities include the following:

• Provide expert scientific leadership in formulating a strategic focus for research in sensory science and consumer behaviour relevant to SIFBI’s industrial and competitive research grant funding, and aligned with national research priorities.
• Develop research that integrates sensory perceptual measures, taste receptor platform into ongoing research in food science, processing, food structure, nutrition and fermentation.
• Act as a member of the SIFBI senior leadership team and contribute to SIFBI’s research portfolio and strategy where appropriate.
• Work closely with industry and academia to actively and strategically forge collaborations, build and manage relationships with industry stakeholders to promote stronger collaboration.
• Develop new ideas and project plans that drive the development of sensory, consumer and eating behaviour research in Asia.
• Attract, recruit, supervise and mentor scientific personnel (Research Scientists, Fellows, Graduate Students and Officers).

Job Requirements:

• PhD in either Nutrition or Food science/technology or other complementary science disciplines with a sound background in Sensory and Consumer Science, Food Psychology and eating behaviour.
• Minimum 10-12 years of post-PhD experience working with different industries or in academic research involving industrial partners.
• Extensive experience with planning and executing studies to better understand the role of food roperties, sensory characteristics and psychological factors that influence food choice and intake.
• Lead with expertise on eating behaviour methods and the design and execution of research studies to understand food intake. Critically analyze, interpret and draw conclusions from scientific studies in the field of human nutrition and food intake behaviour.
• Coach and develop junior staff in the appropriate scientific and statistical methodologies and in the interpretation of data. Ability to work in a multi-cultural setting.
• Proactively collaborate with Scientists within A*STAR to develop interdisciplinary research that combines behavioural and physiological approaches to understanding human food intake.
• An analytical mind-set with great problem-solving abilities to translate research findings to industry outcomes.
• Excellent communication skills with prior experience in cross-disciplinary team management and engagement of multiple stakeholders.
• Experience and track record of peer review publication and presentations in the leading international.

The above eligibility criteria are not exhaustive and A*STAR-SIFBI may include additional selection criteria based on its prevailing recruitment policies. We regret that only shortlisted candidates will be notified.

Service Technician

• Salary: $1,800 - $2,700
• Location: Gul Crescent [Company Transport @ Chinese Garden, Lakeside, Boon Lay]
• Working Hours: 8.15am - 5.45pm
• Working Days: 5 Days [Monday - Friday]

Requirements:

• Minimum Professional Certificate or NiTEC in Electrical & Electronic Engineering / Electrical Engineering
• Experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical would be relevant and useful.
• Understand engineering drawing and schematic layout are essential
• Possess Class 3 driving license

Job Description:

• Responsible for outdoor and indoor repair work of all cleaning products.
• Mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair.
• Work closely with service technicians for problem solving and coordinating jobs between field service and workshop repairs
• Where there is no outdoor repair, you are required to work within the Company workshop

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Our client is from Medical Manufacturing industry. They are looking for a Lab Technician to assist their team for the next phase of their business. They are located in West.

Duties:

• Support day-to-day activities in the chemistry laboratory, ensuring timely release of results.
• Manage chemical inventory and ensure adequate stock for testing.
• Handle laboratory administrative tasks, including glassware washing and data entry.
• Maintain and log laboratory sample records.
• Ensure timely submission of test reports and documentation. Assist in routine testing activities in the chemistry laboratory.
• Coordinate and perform daily log-in schedules for laboratory activities.
• Maintain a high level of 5S housekeeping in line with Good Laboratory Practice.

Requirements:

• Min 1 year of QAQC working experience in Manufacturing industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

Lead Maintenance Technician (Instrumentation & Electrical)

Are you passionate about Chemical Manufacturing?

Do you enjoy ensuring the production of high quality for Chemical Manufacturing?

Join our Chemical Manufacturing team

We are the leader in well construction and production. Our innovative physical and digital solutions improve efficiency, production and maximize reservoir value. Our team ensures high quality, consistency, and reliability for all products throughout the complete life cycle of our chemical manufacturing production process.

Partner with the best

As Lead Maintenance Technician (I&E), you’ll be responsible to facilitate equipment’s servicing & repair, Preventive Maintenance (PM) program, equipment monitoring. Coordinating activities associated to facility and equipment maintenance. You’re responsible and accountable for the EHS Program in safety process, analysis, work permit issuance, near miss reporting and preventive techniques to maintenance department.

As a Lead Maintenance Technician (I&E), you will be responsible for:

• Being responsible for Preventive and Corrective Maintenance activities for facility, equipment (Instruments & electrical equipment)
• Reading and interpreting electrical & electronic single line diagrams and piping & instrumentation diagrams.
• Managing & Reviewing BOM and critical spares for maintenance periodically
• Involving in maintenance and fault finding on instrumentation tools or equipment
• Understanding of SIL/SIF test procedures and/or maintenance activities. Includes managing SIS to ensure functional and integrity requirements are achieved.
• Supervising other Maintenance Technician in their day-to-day task.

Fuel your passion

To be successful in this role you will:

· Have ITE/ Diploma in Instrument / electrical or equivalent.

· Have at least 10 years of practical experience in relevant field.

· Have In-depth knowledge of electrical systems.

· Have good working safety knowledge and hands on experience with chemical plant instruments & electrical equipment.

· Have good collaboration skills, ability to work in groups and supervise small team.

· Have good organizational, multi-tasking, time management skills and good oral & written communication skills.

· Have ability to work off-hours and weekends, as needed.

Work in a way that works for you

We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:

• Please discuss your preferred working patterns with the recruiter during the process

Working with us

Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.

Working for you

Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we must push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:

• Contemporary work-life balance policies and wellbeing activities

• Comprehensive private medical care options.

• Safety net of life insurance and disability programs.

• Tailored financial programs.

• Additional elected or voluntary benefits.

Perform arboricultural and horticultural maintenance works. Duties include but not limited to: -

• Watering, weeding and basic pruning.

• Soil aeration and clearing of horticultural waste.

• Co-ordinate and take instruction from clients and/or foreman and supervisor at site.

• Participate in training and/or assessments.

• Adhere to the control measures stated in Risk Assessments (RA).

• Report to their immediate supervisors any incident, accident, near miss or dangerous occurrence.

• Observe and follow safety regulations.

• Follow safety instructions given.

Any other related duties assigned by the Management.

Job Description

The Aircon Technician is responsible for installing, maintaining and repairing air conditioning systems in residential, commercial, and industrial settings.

Job Responsibilities

• Installing the air conditioning unit, ductwork, and electrical wiring
• Performing routine maintenance tasks such as cleaning the unit, replacing filters, and checking for leaks
• Diagnosing and repairing any issues with the air conditioning system, such as the malfunctioning compressor or refrigerant leak
• Feasibility pre-installation design proposal as well as installation works
• Chemical cleaning and overhaul cleaning
• Communicating with customers to understand their needs and providing them with information about the air conditioning system
• Maintaining accurate records of all work performed on air conditioning systems, including maintenance and repair tasks
• Following safety procedures and regulations to ensure a safe working environment
• Keeping up-to-date with new technologies and techniques in the field of maintenance and repair
• Any other tasks or duties assigned by the Company

Job Requirements

• Min. 3 years of related work experience
• NITEC or equivalent
• Able to read and interpret technical manuals and schematics
• Strong understanding of HVAC systems and be able to diagnose and repair issues with air conditioning units
• Experience with split unit or VRV servicing
• Strong understanding of mechanical, electrical, and hydraulic systems
• Strong analytical and problem-solving skills
• Able to work independently and a team player with excellent interpersonal and communication skills

Responsibilities

• Preparing repair processes such as disassembly, clean, repair and assembly of aircraft components.
• Perform visual and dimension inspection of engine components.
• Check and certify workshop maintenance test rigs, machinery and tools records follow company procedures.
• Identify unserviceable parts, initiate parts requisitions and ensure parts are repaired according to Airworthiness and Aircraft Manual.
• Record information in a timely and useful manner in accordance with Company procedures (Quality manual, AP&P, etc.)

Requirements

• ITE holder or GCE ‘O’ Level or Aerospace Electronic Engineering.
• Good to have 2 years of Aerospace MRO Experience.

Tan Cheu Hoon, Fenny

EA License No.: 02C3423

Personnel Registration No.: R22105896

Pratt & Whitney is a world leader in the design, manufacture and service of aircraft engines, and auxiliary power units. It offers a broad product portfolio that includes commercial aircraft jet engines, commercial turboprop engines, military aircraft engines, business and general aviation jet and turboprop engines, helicopter turboshaft engines.

Pratt & Whitney in Singapore is a global center of excellence with the most comprehensive service offering outside of the U.S. Located in key industrial areas of Loyang, Seletar and Tuas, the Pratt & Whitney companies operating in Singapore include: Component Aerospace Singapore, Eagle Services Asia, P&W NGPF Manufacturing Company Singapore, Pratt & Whitney Canada (SEA), Pratt & Whitney Component Solutions, and Turbine Overhaul Services. Pratt & Whitney has been operating in Singapore for more than 30 years, making it one of the pioneers in the development of Singapore’s world-class aerospace industry. Learn more at prattwhitney.com.

Responsibilities

• Set up and standardize equipment, process parts, interpret and evaluate for acceptance or rejection and document results in accordance with procedures.
• Familiar with the scope and limitations of the method in which certified and as directed, be capable of providing the necessary guidance to trainees and Level 1 personnel.
• Familiar with the codes, standards, and other contractual documents that control the methods including the scope and limitations of each technique/method.
• Conduct system performance checks in accordance with applicable process standard.
• Develop and manage procedures and inspection technique (sheets) for NDT Level 3 approval.
• Carry out any other duties as assigned.

Requirements

• Minimum Diploma in Mechanical Engineering, Electrical Engineering or any other related discipline.
• Possess at least 400 hours of performing FPI (Fluorescent Penetrant Inspection)-Aerospace and at least 2 year of experience in dealing with aircraft structures, engines and/or components, or acceptable alternative training or experience.
• Pass the near vision eye test at Snellen 20/25, Jaeger 1 or its equivalent and the colour perception test.
• Possess experience in P&W FPM Code 07 and ASTM 1417 Type 1 D4 a/d specifications.
• Possess certification of a current NAS410 / EN4179 / PCN / ASNT or SNT-TC-1A.
• Possess basic knowledge of product manufacturing, inspection technology and aircraft engine maintenance.
• Possess good working knowledge of MS Office application (Word, Excel and PowerPoint) and possess working knowledge of SAP.
• Good team player with strong written and verbal communication and interpersonal skills.
• Highly motivated and able to work independently.
• Must be able to work under pressure and thrive in a dynamic and fast-paced work environment.
• Able to display Continuous Improvement and multi-tasking competencies.

Why Join Us

• We drive innovation to go beyond with a purpose to transform aviation.
• We grow our people to become leaders with talent & leadership programs.
• We offer employee scholarship program for further education.
• We care for your well-being with comprehensive health, medical & dental benefits.
• We provide island-wide company transport from major MRT stations.
• We provide structured on-the-job trainings and in-house/ external certifications.
• We value trust, safety, integrity, respect, safety, innovation and excellence.
• We provide annual wage supplement (AWS) and variable bonus plan.
• We provide shift & meal allowances (Shift work only).
• We provide overtime benefits as applicable (Shift work only).
• Our ethos is “We Succeed, Together

*PHARMA MNC; GOOD FOR PORTFOLIO*

*ISLANDWIDE TRANSPORT PROVIDED*

o Conducts activities of equipment power supply and control in order to assure the proper functioning of the plant. Moves raw material and process solvents received by Production Warehouse personnel

o Loads production equipment and conducts activities aimed to put instruments, services and plant in the right conditions to perform in the planned condition required by Manufacturing Formulas, operating procedures or Shift Manager dispositions

o Documents all the activities executed or to be executed signing and dating the official production documentation.

o Communicates and collaborates Shift Manager / Production Support for all the operations to be executed, in solving any anomalies occurred and suggesting possible solutions

o Autonomously assures the regularity of the production operations (reactions, distillation, transfers etc. etc.) verifying on the control panels and control instruments (DCS, alarms, etc.) the process parameters

o Collaborates with the Warehouse to pick up materials (raw material and / or process solvents) from delivery areas, to the shop floor communicating also to the Shift Manager, critical situations (quantities verification, codes, batch number, etc.)

o Transfers liquids from trucks to tanks storage and vice versa

o Reports any anomalies to instruments or equipment to maintain a high efficiency and safety level in accordance with the Good Manufacturing Practices

o Maintains a high level of cleaning in the working area dedicating parts of the working hours to housekeeping operations of the department areas and equipment following the indication of the Shift Manager/Production Control

o Contributes to eliminate inefficiencies and wastes

o During the shift controls that the work progress in line with scheduling. Assures registration of SIC (Short Interval Control) data which contributes to the control program DWOR ( Daily Weekly Operating Report)

o Analyses with the Shift Manager / Production Support unexpected causes of negative trends

o Identifies inefficiencies and wastes paying attention to quality in the operative activities and processes/products using tools of Lean Manufacturing and Continuous Improvement (root cause analysis, problem solving, workshops, 5S)

o Any other general administrative duties/ad-hoc projects as assigned by immediate

supervisor.

Job Requirements

• Min NITEC/ Diploma in Chemistry/ Chemical Process Technology
• Able to commence work within short notice

We regret that only shortlisted candidates will be contacted

Interested candidates please send your resume to [email protected]

Consultant: Tan Ming Hui, Magdelene (R21101623)

Recruit Express Pte Ltd (99C4599)

Job Description:

• Handle Service and repair cases of ear pieces, In-The- Ear (ITE) Hearing Aids, Behind-The-Ear (BTE) Hearing Aids
• Handle Urgent custom made ear piece order
• Provide Support in logistics (i.e Packing)
• Trimming/ Filling Ear mold
• Need to perform soldering work
• Quality Check and testing of all out-going instruments
• Scanning Ear impression for custom made ear mold and ordering from Vietnam
• Maintain housekeeping for safe working environment
• Any other ad-hoc duties assigned by the supervisor

Job Requirements:

• NTC/ ITE or Diploma in Engineering , preferably in Electronics, Electrical, Mechatronics and etc

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

Your Responsibilities:

• Demonstrate strong knowledge in the manufacturing of Downstream processes, including Fermented broth, Protein separation & purification.
• Hands-on experience in operating and optimizing Continuous centrifuge and Homogenizer for efficient cell separation.
• Proficient in the operation of Microfiltration and Ultrafiltration systems, encompassing Hollow fiber and Spiral modules.
• Hands-on experience with Chromatography systems and related downstream processes.
• Practical experience in the Spray drying process.
• Extensive experience in various downstream processes, ranging from small scale to higher scale.
• Proficient in identifying and resolving issues related to downstream manufacturing equipment and processes.
• Experience in Microbial downstream processes, both intra-cellular and extra-cellular, including separation and purification methods.
• Responsible for operating, optimizing, and stabilizing downstream manufacturing processes.
• Familiarity with Contract Development and Manufacturing Organization (CDMO) processes and adept at customer management.
• Proven experience in scaling up downstream processes from small scale to large scale.
• Train and oversee the manufacturing team, ensuring adherence to all procedures during the process.
• Hands-on experience in project-related activities, including equipment qualification and process validation for downstream processes.
• Collaborate with the QA team to prepare all process-related documents in adherence to quality standards.

Your Profile:

• Bachelor’s or higher degree in a relevant field.
• 3-5 years of hands-on experience in downstream manufacturing processes.
• Strong analytical and problem-solving skills.
• Excellent communication and team collaboration abilities.

Responsibilities

• Diagnosing issues on the service site and subsequently repairing or replacing defective parts.
• Commissioning and decommissioning our equipment.
• Studying plans, drawings, specifications, and work orders to ascertain work requirements and the sequence of repairs and/or installations.
• Ensuring that deadlines are met for service, repair, and overhaul work.
• Providing technical support for service calls.

Requirements

• Minimum NITEC in Mechatronic/Electrical or Electronics Engineering or it's equivalent
• At least one year of related field service experience
• Understanding of relevant electrical codes, standards, and regulations.
• Proficiency in installing, repairing, and maintaining various types of electrical system equipment and components.

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to send in your resume.

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Carry out maintenance activities such as:

• Servicing of equipment such as centrifugal pump, diaphragm pump, replacement of mechanical seal, pump alignment, rigging & lifting.
• Perform repairs and other maintenance activities to specified specs and standards per procedure.
• Able to perform predictive maintenance and data collection for field equipment
• Able to perform QC equipment maintenance and troubleshooting such as freezer and incubator.
• Attend to equipment breakdown and preventive maintenance on short notice during weekends/public holidays.
• Support equipment inspection with vendor representative on tanks, column, pipelines and centrifuge as per RSTO Visual Inspections standards.
• Repair and replace damaged parts to bring equipment back into service timely to support continuous production planning.
• Perform minor piping modification and rebuild of MRO spare part.
• Perform polishing and passivation of vessel internal surfaces according to RSTO procedure.
• Maintain all machine shop tools and equipment such as, and not limited to, welding set, working tooling, lifting gear.
• To actively participate and perform workplace 5S housekeeping.
• Able to contribute and implement Safety Improvement Ideas for CI projects works together with System/Equipment Engineers.
• Perform tasks as defined in the Maintenance Work Orders for assigned equipment or system.

Safety, Health & Environment:

• Comply with all RSTO’s Safety, Health & Environmental (SHE) requirements, never put oneself and others at safety & health risks, and report any workplace accidents, near misses and hazards as soon as practicable.
• Observe all RSTO’s site security measures at all times, and report any suspicious characters/objects & damaged security mechanisms to Site Security immediately.

Lean Production System:

Embody PT Lean Production System (LPS), while demonstrating a continuous improvement mindset and behaviors through the use and application of LPS tools for continuous improvement initiatives.

Job Qualifications:

The following trainings shall follow the latest applicable WSH regulations

• Scissor Lift/Vertical Personnel Platform - Operator
• Confined Space Operation - Worker
• Work at Height – Worker

Job Requirements:

• Willing to perform shift hours as required.
• Minimum of 3 years working experience, including GMP and Pharmaceutical environment
• Proficiency in spoken and written English.
• Computer literate on Microsoft Office, Email operating system, CMMS software.
• Working experience in handling of hazardous chemical.
• Working experience in basic welding and fabrication work.
• Preferred working experience in handling of Electro-polishing Equipment.
• Preferred experience in operating digital video scope.
• Preferred experience in handling homogenizer and centrifuge equipment.
• Preferred work experience in GMP and Pharmaceutical environment.
• Able to interpret P&ID, LOTO mark-up drawings and perform physical Energy isolation processes.
• Able to perform confine space vessel related work.
• Able to support night shift and outside office hours as assigned by RSTO or Task Supervisor.
• Willing to accept 1-Year contract basis.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

JOB RESPONSIBILITIES:

• Perform specimen reception, preparation and packing of specimens
• Carry out specimen analysis, operate, maintain and troubleshoot the analysers
• Assist with telephone reception duties and ensure patients’ bills are accurate and correct
• Adhere to department’s standard operating procedures and safety requirements

WORKING HOURS:

• 3 shifts, any 5 days

WORK PLACE:

• Jurong East

JOB REQUIREMENTS:

• Diploma In Biomedical Science
• Diploma In Biotech
• Diploma In Medical Lab Science
• Relevant Working Experiences Preferred
• To Perform 3 Rotating Shifts - Morning, Afternoon And Night Shifts

All qualified applicants, please send in your resume NOW to:
Whatsapp: https://wa.me/+6597430026
Email : [email protected]

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA License Number: 99C4599

• Basic $2260 - $2600
• 5 Working Day: Mon- Fri
• Working Hour: 8am - 5.30pm & 8pm - 5.30am (Rotate every months)
• Location: Ang Mo Kio (Transport Allowance $70)
• Night Shift Allowance + AWS + VB + MNC Medical Industry

Responsibilities:

• Assist in new / modified materials and process development program.
• Perform microbiological / environmental / chemical analysis pertaining to product release, project and validation related testing.
• Ensure that all tests are performed in accordance with written procedures.
• Isolate and identify unusual contamination and their sources.
• Write test method validation protocols for processes in which microbiological control is of significance.
• Ensure documented sterilization procedures are provided.
• Monitor the operation of sterilization facilities.
• Appointed as a trainer on identified subject matter expert. Train new Lab staff.
• Assessment of training effectiveness for new Lab Junior Technicians / Technicians.
• Supervise junior technicians / technicians during testing and that will also include equipment troubleshooting, equipment failure handling and investigation.
• Support Lab consumables purchase, inventory and control expenditure.
• Assist in investigating microbiological / environmental / chemical analysis failure investigation. (not pertaining to Singapore site).
• Conduct or review internal calibration and maintain calibration master list.
• Verify tagging status and certificate of analysis for product release.
• Verification test results obtained by QA Lab Junior Technician / QA Lab Technician.
• Troubleshooting when equipment breakdown or malfunction.
• Ensure and verify chemical mixing process is performed in accordance with written procedures and any other tasks assigned by superior if required.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated Resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun
Registration Number: R23116696
EA Licence No.: 06C2859 (MCI Career Services Pte Ltd)

Technician Production Maintenance

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As an Technician Production Maintenance you are tasked to perform preventive and corrective maintenance of Compounding, Filling and packaging and to support project team activities at Tuas. In this role, a typical day will include:

Responsibilities

• Responsible for in-process and final product quality analyses/inspection in compliance with standards and regulatory requirements.

• Interprets and evaluates the analyses in terms of accuracy and precision compared against established specifications.

• Identifies on-going quality issues, prevents potential production issues, and makes suggestions for improvement.

• Uses various measuring devices, testing equipment, predetermined methods, operations, setups and prescribed specifications to accept or reject products.

• May work from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists.

What You'll Bring to Alcon

• Min Diploma in any Engineering studies

• 1-3 years of experience in preventive and corrective maintenance.

Why Join Us:

• Opportunity to work with a leading global medical device company.
• Collaborate with a diverse and talented team in a supportive work environment.
• Competitive compensation package and comprehensive benefits.
• Continuous learning and development opportunities.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Senior Equipment Technician

• Salary: $2000- $2800
• Location: Gul Crescent [Company Transport @ Chinese Garden, Lakeside, Boon Lay]
• Working Hours: 8.15am - 5.45pm
• Working Days: 5 Days [Monday - Friday]

Roles & Responsibilities

• Outdoor and indoor repair of cleaning equipment e.g. road sweepers, ride-on auto-scrubbers
• Robot mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair.
• Ensure the workshop areas are kept clean and tidy at all times

Requirements:

• Diploma in electrical and electronic engineering
• With 3-4 years hand on repair and maintenance experience

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Job Scope :

Troubleshoot, service, repair, and maintenance of commercial kitchen equipment (Hot / Cold) and facilities; which includes refrigerator, lighting, kitchen equipment and plumbing facility.

1. Perform equipment installations, commissioning, modification, troubleshooting, repair, servicing and other technical support.

2. Complete documents to verify work performed when necessary.

3. Ensuring all works compliance with appliance standards and Health and Safety Act.

4. Advise the management team of critical systems that could be hazardous.

5. Ensure adherence to company standards and customer satisfaction.

6. Other works related.

Requirements :

7. With or without experience

8. Willing to learn

9. Driving license(class 3) with a good driving record to operate a commercial vehicle will be a plus.

10. Good physical condition, Good attitude, Team player

11. Willing to work overtime on Sunday & Public Holiday will be a plus.

12. Working hours : Mon-Fri : 9am-6pm, Sat : 9am-1pm

Entry level / Junior welcome apply

5 days work week / Permanent Role / Company transport provided

Full training provided !!

Job Responsibilities :
* Perform quality control analysis for in-coming, intermediate and final products
* Carry out calibration of equipment and ensure in working condition
* Ensure activities in the laboratory are safe
* Maintain up to date analysis reports

Job Requirements :
* Nitec / Diploma in Chemical Process Technology / Chemistry or equivalent
* Preferably with hand on experience in sampling, preparation and analysis for
liquid samples
* Prefer experience in handling laboratory analytical
equipment

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

The Electrical technician will exhibit exemplary safety and technical competence in all matters pertaining to electrical maintenance works on around the vessel. He is responsible for ensuring that he maintains competence to carry out allotted tasks.

Responsibilities & Standards

1. Maintain and adjust the condition of electrical assets: Electrical Systems, Equipment, UPS Batteries, Generators Switchboards, Motors, Wiring, Portable tools, etc

· Comply with relevant authorisation procedures, safe working practices and specific instructions.

· Complete maintenance in an agreed timescale, using safe and appropriate methods and agreed procedures.

· Ensure resources and spares are planned for and used cost effectively.

· Ensure the correct, current operating requirements are available for reference.

· Ensure any assets which have been maintained or had parameters adjusted still comply with specified operating requirements with minimum disruption and with the specified methods, tools and materials.

· Monitor and record any maintenance or adjustments accurately in work history in MMS.

2) Monitor And Assess The Performance And Condition Of Electrical Assets

· Obtain information or parameters from reliable sources. (Inspection ports, connections, vendor documentary information, instrument readings, diagnostic equipment.) using approved methods

· Use monitoring equipment or procedures correctly to assess the condition of electrical assets

· Ensure monitoring and checks are carried out in line with specified MMS timescales and schedules.

· Record and communicate monitored outcomes accurately and in timely fashion to raise the effectiveness of MMS.

· Compare current performance with previous assessments and take action where differences must be addressed.

3) Diagnose Faults in Electrical Assets

· Respond promptly to problems in line with approved procedures.

· Select appropriate tests and diagnostic procedures and apply them methodically.

· Determine the cause, nature and extent of problems in the performance and condition of electrical systems or assets.

· Use the results of inspections to determine the appropriate actions to take.

· Record an accurate and full description in the appropriate document history

4) Monitor and Maintain Pollution Control Measures.

· Sample and check that controlled process discharges from area of responsibility to the environment are within prescribed limits

· Identify and halt unplanned discharges where possible, and reported immediately according to policy, procedure and regulation.

· Equipment, waste or other materials for disposal are dealt with according to the correct procedure

· Ensure resources such as PPE, materials, tools and spares are accounted and not wasted or used inefficiently

5) Emergency Response

· Carry out Emergency Response Role

· Show competence during drills and exercises

Units of Competence

· See Training Matrix (HSEP Shipboard Manual)

· See Electrical Technician WAM (Vol. 2 Competence System Manuals) See Electrical Competency Manual No: 00.07.10.221

· Provide any additional duties as required by the OIM/Unit Spt. and /or HOD to maintain safe and efficient running of the Unit.

Qualifications and Experience

· Proven experience and qualified to ONC/ HNC, or NVQ Level 3 or recognised equivalent in Electrical Maintenance Engineering

· Minimum 5 yrs experience preferred, with 2 years offshore petrochemical experience desired

· Good knowledge of PTW, Electrical Isolation Standards, Risk Assessment and Man Management, Power Management System, Generation on LV

· COMP ex E'x' Course.

· Preferred courses: HV/LV Protection and HVLV Switching.

· Medically fit to offshore International standards such as ENG1 or equivalent.

Personal Skill

• Personal: Exemplary awareness of safety issues. Conscientious, flexible, versatile and determined.
• Leadership: Able to assist with operation of Electrical Power Generation and distribution systems. Good levels of written and spoken communication. Positive and assertive.
• Technical: High standard of analytical, diagnostic technical and professional knowledge on electrical systems, components and procedures.
• IT: Use Standard Management System ‘Office’ package electronic mail system and diagnostic software and equipment as required.