Responsibilities:

• Analysis of fuel oil, lubricants, petroleum products, and general chemistry
• Analysis of other non-routine analysis
• Maintenance and calibration of laboratory equipments
• Ensure proper laboratory housekeeping

Qualifications

• Singaporeans preferred
• Candidate MUST possess at least a Diploma in Chemical Process Technology, or Chemical & Petroleum or equivalent
• Experience in chemical or petroleum laboratory will be an added advantage
• Oil Condition Monitoring experience is preferred
• Responsible and able to work under pressure
• Possess good interpersonal skills and ability to work as a team
• Working hours: Mondays to Fridays and alternate Saturdays
• Must be able to work alternate shifts on weekly basis
• Applicants must be willing to work in Changi South. Transport provided from Bedok/Expo MRT

· Proven experience as maintenance technician

· Basic understanding of electrical, hydraulic and other systems

· Knowledge of general maintenance processes and methods

· Working knowledge of tools, common appliances and devices

· Manual dexterity and problem-solving skills

· Good physical condition and strength with a willingness to work overtime

· MOM LICENSE NO.:16C7994

· EA REG. ID: R1983060

• MNC Company
• Basic $2000 - $2200 + Allowance + OT + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Transport Provided)
• 12 Hours Rotating Shift

Job Responsibilities:

• Perform minor maintenance
• Performing checks, start-up and shutdown operations on process equipment such as pumps and compressors
• Carry out filter changes
• Isolating piping systems for plant start-up, shutdowns, product grade change and troubleshooting operations
• Adjusting process parameters to optimize process operations under supervision of Supervisors
• Commissioning and decommissioning of process equipment
• Performing emergency shutdown of process equipment
• Proper handing and blending of non-conforming and off specs products
• Preparing plant equipment for maintenance
• Preparing chemicals, including mixing and dilution, for process operations
• Performing inter-tank transfers of chemicals and products based on established quality procedures
• Performing emergency response activities and drills
• Other ad-hoc duties as assigned

Job Requirements:

• Nitec / Diploma in Chemical Process / Mechanical Engineering / Electrical Engineering or equivalent
• Able to perform 12-hr rotating shift

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

CHAN KAM HUI (R24125233)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Salary range: $2500 - $3500
• Working days: Monday to Friday
• Working hours: 8am-5pm / 8.30am - 5.30pm
• Working Location: Mandai Estate (Kranji / Yew Tee)

Job Description

• Install, repair, test & commission cable systems (voice/data/fibre optics)
• Performs termination and testing of new cabling
• Prepare / Install cable pathways & supports
• Assist in the preparation of tools & materials used for daily work assignments
• Troubleshoot cabling system issues & perform repairs & maintenance
• Assist co-workers with installation & routine maintenance of structured cabling systems
• Work closely with client to manage schedule operations of assigned duties.

Requirements

• NITEC (Electrical Engineering / Electrical Technology/ Electronic / IT ) or work- related experience
• Class 3 driving license would be advantageous

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Chemist

• Work Location: Jurong Island (Company transport provided near Jurong East MRT)
• Work hours: 8 am to 4.30 pm (Mon-Fri)
• Salary range: $4000 - $5500 + $200 (site allowance)

The Chemist is part of the pioneer team in the startup of EVAL production line, the Chemist is responsible for setup of QC Laboratory at new EVAL site, including management and training of Laboratory analyst, Laboratory system establishment and management to achieve safe and stable commissioning and startup of the new plant.

Responsibilities:

• Interpret laboratory results that are outside of the technical ability of the Lab Analysts.
• Review all process and final product test results to check for validity and possible quality related
• issues.
• Assist quality lab manager in classification for final product and compounding lots.
• Assist quality lab manager to develop and implement QC specifications and standards.
• Assist quality lab manager to establish lab system according to HSEQ requirements.
• Conduct method development and validation, review and upkeep SOP of test procedures,
• calibration procedures and analytical instruments.
• Analyse, review and troubleshoot reliability issues of laboratory equipment and analysis problem
• and develop practical solutions.
• Liaise with vendors to troubleshoot and maintain laboratory equipment.
• Develop, implement, and follow calibration plan for equipment to ensure lab data is always
• accurate, consistent, and repeatable.
• Manage lab external agency audits and management systems certification compliance.
• Support Manufacturing, Quality, Sales, and Product Management functions.
• Assist lab manager, production, or other departments with special projects, as needed.
• Lead Special lab Projects and new grade trials.
• Implement and participate in safety and quality improvement activities.
• Evaluates reported results for consistency with plant process conditions.
• Trains laboratory personnel on new instruments and procedures as needed.• Conduct internal audits on the proper execution of test methods.
• Liaise with Supplier, execute procurement process and receipt.
• Monitor and follow up on daily lab analysis result for accuracy and troubleshooting.
• Task as assigned by QC Manager

Requirements:

• Bachelor's degree in chemistry or related field
• Minimum 5 years’ experience in analytical lab with manufacturing facility
• Experience required in new Laboratory set up, system establishment.
• Experience required with GC, ICP, GC-MS, Antek, KF, IR, UV, Extruder, DSC etc.
• Experience required in statistical process control and statistical quality control.
• Experience preferred in polymer testing and analytical techniques.
• SAP & LIMS experience preferred.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

We are seeking an experienced Mechanical Technician to perform technical maintenance and repair operations on marine vessels at Singapore Anchorage, PSA Terminal, shipyards, our workshop, and on overseas assignments when required.

Key Responsibilities:

• Carry out mechanical repairs and maintenance on vessels.
• Replace or repair mechanical spare parts as needed.
• Provide technical services, including equipment installation, troubleshooting, and system overhauls.
• Adhere to industry regulations and company procedures to ensure safety and compliance.
• Work independently to organize and complete assigned tasks.
• Prepare detailed service reports and recommendations following company guidelines.
• Assist with other technical duties and ad-hoc assignments as directed by supervisors.

Requirements:

• Diploma in Mechanical/Electrical Engineering (Fresh graduates are encouraged to apply, training provided).
• Flexibility to work on weekends and public holidays when required.
• Strong team player with the ability to work independently when needed.
• Valid Class 3 driving license is a plus.

Job Description

• Perform pest control treatments and inspections at clients' premises such as F&B, condominiums, landed properties, and commercial properties.

• Provide relevant advice to clients to mitigate and prevent pest issues.

• Ensure the service provided is prompt and of good quality.

• Maintain pest control equipment in good working condition.

Requirements

• Degree or Diploma Holders
• Must possess a Vector Control Technician (VCT)
• Must possess a Class 3 driving license.
• 2-3 years of hands-on experience in Pest Control Industry is preferred
• Able to accept 6 working days including Public Holidays and last-minute work assignments
• Fluency in written and verbal English for issuance of service report to the clients
• Proficient in Microsoft Office such as Outlook, Word, and Excel
• Good communication and interpersonal skills
• Positive work attitude, able to work independently and in a team

*We regret that only shortlisted candidates will be contacted

• Candidate must possess at least Diploma or Geotechincal Certificate
• Required language(s): English (to liaise with associates)
• At least 5 Year(s) of working experience in Ground Stabilisation / Ground Improvement (PVD) is required for this position.
• Must possess AutoCAD skill
• Require to understand drawing (Geotechnical)
• To check and analyze the accuracy of material take-off
• Monitor overall job performance
• Co-ordinate with Site Engineer, Owner and Other Sub-Contractors during work progress

Job Description

• provide adhoc technical support on daily basis ;
• see through the implementation of custom mobile app ;
• set up and maintenance of servers ;
• procurement and recording of company IT assets ;
• diagnose and troubleshoot technical issues

Job Requirements

• Proven work experience as a Technical Support Engineer, Desktop Support Engineer, IT Help Desk Technician or similar role
• Good understanding of computer systems, mobile devices, mobile applications and other tech products (including maintenance of CPU set)
• Familiar with infrastructure set-up, server/firewall set-up, administration of server and domain (including domain migration)
• Proficient in Microsoft Excel (VBA is a plus)
• Excellent problem-solving and communication skills
• Diploma in Information Technology, Computer Science or relevant fields

Job Overview:

We are seeking a talented and detail-oriented Eyelash and Eyebrow Technician to join our beauty team. The ideal candidate will specialize in a variety of eyelash and eyebrow services, including eyelash extensions, brow shaping, tinting, and lamination. You will provide high-quality beauty services to clients, ensuring they leave satisfied with their new look and feel.

Key Responsibilities:

• Perform eyelash extension services, including classic, volume, and hybrid styles.

• Conduct eyelash lifting and tinting services.

• Provide eyebrow shaping, tinting, and lamination services.

• Offer professional advice to clients on lash and brow care.

• Maintain a clean and sanitized workspace to meet health and safety regulations.

• Ensure a high standard of client service, always maintaining professionalism.

• Stay updated on the latest beauty trends and techniques related to lash and brow services.

• Manage customer bookings and maintain accurate records of services provided.

• Follow company policies for stock management and ensure adequate supplies for the services provided.

Required Skills and Qualifications:

• Proven experience as an Eyelash and Eyebrow Technician, with a portfolio showcasing your work.

• Certified in eyelash extensions and eyebrow services (preferred).

• Knowledge of lash and brow treatments, including techniques, aftercare, and trends.

• Strong attention to detail with the ability to create natural and customized looks.

• Excellent customer service skills and a friendly, professional attitude.

• Ability to work efficiently in a fast-paced environment.

• Good communication skills and the ability to work well in a team.

Preferred Qualifications:

• Certification or training in lash and brow treatments from a recognized institution.

• Previous experience in a beauty salon or spa setting.

• Familiarity with retailing beauty products and upselling services.

Benefits:

• Competitive salary with commission

• Professional development opportunities

• Discounts on products and services

If you are passionate about beauty and enjoy creating a welcoming environment for clients, and want to be part of a supportive team, we would love to hear from you! Apply now to join us as an Eyelash and Eyebrow Technician.

As an Air Conditioning Repair & Servicing Technician, your main duties is to service, troubleshoot and repair air conditioning systems to ensure optimal performance and indoor air quality. This role involves diagnosing issues, performing repairs, and conducting routine maintenance to enhance system efficiency and customer satisfaction.

Job Description:

• Collect the spare parts from the warehouse store based on the daily job indicated on the tablet.
• Troubleshoot and resolve issues on malfunctioned HVAC systems.
• Wash and clean all dismantled parts to improve efficiency and air quality.
• Refill refrigerants by replenishing and fixing leaks as needed.
• Communicate with clients with regards to problems in equipment and post-jobs reports.
• Ensure safe-keeping of hand tools and maintain good housekeeping.
• Must wear personal protective equipment (PPE) when necessary (e.g. googles, earplugs, respirators, safety harnesses, safety shoes, helmets, sunscreen).
• Ensure all works are carried out safely in accordance with safety procedures and practicing of Workplace Safety and Health (WSH) Act.
• Provide technical advice and assistance on all maintenance functions.
• Prepare service reports after every completed job for customer's endorsement.
• Handle any ad-hoc projects and duties assigned by reporting manager and/or management.

Job Requirements:

• Possess a Singapore Class 3 license will be an added advantage.
• Minimum Nitec / NTC 2 or 3 certificates in Electrical, Mechanical or Electronic field.
• At least 1 year of working experience in the related field; with maintenance experience in HVAC, refrigeration & M&E systems.
• Positive attitude, good interpersonal & customer-centric skills.
• Experience in air-conditioning repair & maintenance.
• Strong knowledge/experience in HVAC or ACMV systems for residential or commercial sectors.
• Ability to work independently and collaboratively in a team.
• No experience is also welcome to join as apprentice.

Working Location:

Sungei Kadut

• Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

Note:

• Only shortlisted candidates will be notified.

Responsibilities:

• Inspect and troubleshoot equipment and machine.
• Perform preventive maintenance to achieve minimal to zero machine downtime.
• Source replacement parts.
• Repair and replace faulty parts & equipment.
• Carry out minor fabrication
• Carry out building maintenance and service
• Comply to all risk control measures and adhere to safe work procedure according to WSH (Risk Management) requirements while performing assigned work duties.

Requirements:

• Rich experience as a technician especially on machine maintenance and repair
• Electrical, electronic and mechanical knowledge
• Detailed with problem-solving skills

Our culture believes in Powering Your Potential . We provide global opportunities to develop your career, make your community a better place and work with today’s most innovative thinkers to solve the world’s toughest problems.

We believe in flexibility for you to explore your passions while making an impact through meaningful work within our inclusive workforce. That’s what #LifeAtCummins is all about.

We are looking for a talented Lead Technician - Mechanical to join our team based in Tuas, Singapore. This is an Onsite role reporting to the Service operation Manager. This role will also require travelling within Singapore. Reporting to the Service Supervisor, this role provides support for all Cummins products, primarily in Automotive, Industrial and Marine applications, in a combination of workshop and field work. You will respond to engine breakdowns and provide technical analysis of failure, warranty support and troubleshooting engineering issues. Previous experience in a similar Service role, and knowledge of High-Speed Diesel engines, is essential.

This position offers a long-term career with a global organisation in the power industry and could be the next step in your successful Service career.

In this role, you will make an impact in the following ways:

Responsibilities:

• Establishes and continually develops productive customer relations and ensures prompt and efficient attention to customer needs.
• Applies the use of specialized tools and follows documented procedures and policies to diagnose and complete complex repairs at customer site.
• Performs preventative maintenance activities as per documented schedules and standards on engines and related components in the field.
• Escalates unresolved issues to product specialists or supervisor.
• Coaches and develops technicians and/or apprentices and transfers knowledge and experience to others; may provide work direction; may review repair plans, parts lists, etc.
• Completes required documentation, such as service worksheets, timesheets, warranty claims, quality documents via handwritten forms or business system input screens.
• Identifies additional sales and service opportunities with customer. Completes training in line with skill and business requirements.
• Maintains service vehicle and tools for cleanliness and proper operation.
• Ensure adherence to all relevant Health Safety & Environmental policies, procedures and legislation and reports any issues / incidents to site management and to their supervisor.

RESPONSIBILITIES

To be successful in this role you will need the following:

• Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences.
• Customer focus - Building strong customer relationships and delivering customer-centric solutions.
• Develops talent - Developing people to meet both their career goals and the organization’s goals.
• Manages complexity - Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems.
• Manages conflict - Handling conflict situations effectively, with a minimum of noise.
• Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels.
• Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace.
• Diagnostics Application - Translates customer complaints to develop troubleshooting plan; troubleshoots issue following guided work flows, procedures, specialized equipment such as mechanical and electronic service tools, and diagnoses computer software to isolate failed components to enable a successful repair; validates repair by duplicating complaint to ensure it has been resolved; documents results of troubleshooting in business systems to communicate what has been done for payment and historical tracking.
• Electronic Service Tool Application - Identifies the suite of available hardware and software tools required for a service event; utilizes the appropriate electronic tool set to maintain the product or diagnose and troubleshoot an issue; interprets electronic tool results or recommendations to determine next steps for service resolution.
• Engine Systems Interactions - Interprets and analyzes the interactions of internal and external electrical and mechanical systems (exhaust, heating, cooling, fuel systems, driveline, aftertreatment, controls, sensors, etc.) by applying tools, service publications (Cummins, Original Equipment Manufacturer) and taking measurements to efficiently and correctly diagnose and repair.
• Product Repair and Maintenance - Repairs and maintains mechanical/electrical products following guidelines, using required tools within standard repair time to ensure a quality repair; disassembles and assembles engines or power generators following guidelines, using required tools to ensure a clean and organized environment; inspects and replaces parts and components following re-use guidelines to minimize customers cost of ownership; performs progressive damage check following guidelines to restore to pre-failure condition.
• Service Documentation - Creates and verifies customer, equipment and technical information; captures specific data using required service tools; follows procedures and documents required information in the service management system in order to have an accurate record of the work done.
• Technical Escalation - Obtains product technical issue information and utilizes available resources including data management tools; elevates issues to a higher level of expertise, balancing timeliness of customer response with investigation efforts; captures all troubleshooting steps in the appropriate database in order to ensure seamless transitions and accurate response to ticket resolution in a timely manner.
• Values differences - Recognizing the value that different perspectives and cultures bring to an organization.

QUALIFICATIONS

Education, Licenses, Certifications:

• Trained Engine Technician (Preferred)
• Vocational diploma from relevant technical institution
• Locally valid driving permit, Class 3 and above This position may require licensing for compliance with export controls or sanctions regulations.

Experience:

• Significant field service work experience
• Expert level knowledge of and/or experience with engine products
• Customer service experience
• Experience providing technical advice and coaching to more junior technicians (preferred)
• Able to write and speak in English language
• Preferably with experience in internal combustion engines
• Experience in Marine environment will be advantageous
• No cross-border relocation provided.
• Team leading experience, 3+ years required.

About Chambers International

Established in 1980, Chambers International, has built a strong presence in Singapore as a reputable group of companies providing a comprehensive range of professional real estate consultancy services, including integrated facilities management and strata title management.

We're Hiring!

The ideal candidate should possess strong technical skills, attention to detail, and the ability to follow supervisor directions. We are looking for someone who is proactive, reliable, and committed to providing high standards of service and safety. If you have a passion for maintenance work and enjoy working in a team-oriented environment, we welcome you to join our team.

Responsibilities:

• Carry out authorized repairs to buildings, facilities, and services as directed by the supervisor.
• Conduct inspections and maintenance of lighting in common areas.
• Perform authorized work on installation, fitting, and modification of plumbing and sanitary systems in common areas.
• Maintain inventory and records of all parts and end-items used for maintenance work, including those kept in the store.
• Conduct routine inspections of common areas and facilities, and rectify faults and defects with proper work orders.
• Attend to all emergencies and resident complaints promptly, politely, and tactfully under the instructions of the supervisor in charge.
• Ensure proper documentation of work records and work orders upon completion.
• Handle any ad-hoc task assigned by the supervisor.

Requirements:

• NITEC/Higher NITEC/Diploma in Electrical / Mechanical / Mechatronic Engineering/ Facility Management
• Minimum 1 year experience in building maintenance.
• Good knowledge in building mechanical and electrical system
• Perform Work at Height (WAH) will be an added advantage
• Possess a positive attitude, excellent interpersonal skills, and a customer-centric approach

Interested applicants please indicate the details in the resume:

• Notice period/Intended start date
• Last drawn and/or current salary
• Expected salary
• Reasons for leaving current and/or last employment

We regret that only shortlisted candidates will be notified.

Other Information:

This position involves multiple workplace locations in Singapore.

MKS is committed to being the highest quality and reliability provider of laser-based manufacturing systems for leading electronics and device manufacturers world-wide; helping them to optimize production of the materials, components and systems that are an integral part of the electronic devices in use today.

As part of the mission, the Quality Test Technician will be supporting EE Test Engineering in troubleshooting and repair activities on ESI PCBA/Control units.

Key responsibilities:

• Conducting First Article Test on new Subsystem, PCBA and Cable assemblies. Analyzing and determining hardware test requirements, supporting Test development activities.
• Maintain, Modify and Improve Test System hardware and fixtures.
• Support Engineers to deploy the new Test Fixtures at Production and external supplier. Resolve the Test Fixtures and Equipment issues on time.
• Perform hands-on assembly, set-up, testing, troubleshooting of PCBA and prioritize to resolve the issues.
• Support of FPY improvement activities and determines root cause of Manufacturing low Yield / Quality issues.
• Support Engineers to setup and conduct experiment/tests, compile and analyze data.
• Handle Field failures troubleshooting and provide updates to Engineering team to prevent future occurrences.
• Incorporate continuous improvement concepts and techniques into all aspects of Job.
• Inspect incoming mechanical parts and materials to ensure they meet required specifications and quality standards.
• Performs other duties as assigned by supervisor based on business needs.

Requirements:

• Minimum of three (3) years of experience in PCBA Testing and troubleshooting is preferred.
• ITE / Diploma or higher in engineering or equivalent.
• Able to read and interpret Electrical Schematics, Specifications and Manufacturing manuals.
• Experience with test equipment e.g. function Generator, Oscilloscope etc.
• Good written and verbal English language communications skills.

As a Technician, you provide technical support to new and existing car parks, and work with contractors to ensure the completion of works required. You also upkeep and perform preventive maintenance on parking equipment and maintain the required documentations for works done.

Job Duties:

• Provide technical support and troubleshooting of car park equipment, diagnosis of breakdowns and enhance servicing of car park systems.

• Upkeep and perform preventive maintenance of parking equipment, replacement of parts and components at car park sites.

• Assist in resolving technical issues with contractors, suppliers, vendors and customers.

• Perform start-up works for new car parks and termination works for handing over of existing car parks, such as termination of telephone lines, coordinating with contractors to install or dismantle signage and equipment etc.

• Co-ordinate and follow-up with projects on site.

• Maintain documentation of maintenance and repair works, purchases, testing records, etc.

• Initiate purchase requisition for spare parts, consumable items and works orders.

Job Requirements:

• At least a NITEC or professional certificate in Technical or Engineering related specialisations (Computer/ Telecommunication/ Electrical/ Electronic/ Mechanical/ Industrial etc).

• Willing to work in different car park locations.

• Willing to work rotating shifts including weekends.

• Possess a valid Singapore Class 2B or Class 3 licence.

• Entry level candidates are welcome, training will be provided.

An exciting opportunity has arrived at The Garcha Group, Singapore’s boutique hotel group currently with the following hotels:

- Maxwell Reserve, Autograph Collection Hotel (Marriott);

- Duxton Reserve, Autograph Collection Hotel (Marriott);

- The Vagabond Club, a Tribute Portfolio Hotel (Marriott);

- The Serangoon Club, a Tribute Portfolio Hotel (Marriott).

Garcha Group Benefits:

- As an associate of a Marriott hotel, you, your parents or parents-in-laws, children, spouse/domestic partner and

siblings are eligible for discounts on F&B and room rates in 7,000+ hotels world-wide.

- As an associate of a Marriott hotel, you have access to the “Global Learning + Development” tool which creates for you personalized learning experiences designed to help you thrive in their Marriott career journey.

- 3 days 2 nights yearly staycation including all meals and beverage in any of the 4 Garcha Group hotels in

Singapore.

- 20% off Food & Beverage at all Marriott & Garcha Group restaurants and bars.

Job Description:

· Respond and attend to guest repair requests.

· Communicate with guests/customers to resolve maintenance issues.

· Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication.

· Visually inspect tools, equipment, or machines.

· Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings.

· Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.

· Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, energy conservation, and/or general building.

· Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough clean-up of the painting or repair area.

· Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items.

· Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work.

· Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers.

· Display basic computer skills including inputting air handler schedules and making temperature changes.

whatsapp: 85986715

汽车零件维修员工

薪水：$1800(根据经验 面试可和老板谈)

时间：9am-6pm（周一到周五）(周六9am-2.30pm）(12am-1pm吃饭，3pm-3.15pm喝茶)

地点：靠近woodland

Auto parts repair TECHNICIAN

Salary: $1800 (based on experience, interview can be negotiated with the boss)

Time: 9am-6pm (Mon-Fri) (Sat 9am-2.30pm) (12am-1pm for dinner, 3pm-3.15pm for tea)

Location: Close to Woodland

Jie Shun Jia | EA License No.: 24C2410 | EA Registration No.: R24124440 (FENG YINGJIE)

Position: Permanent Production Technician
Location: Kallang Place

Key Details:

• Working Hours: Monday to Friday, 7:00 AM – 4:30 PM
• Salary: Up to $2,500/month (based on qualifications and experience)
• Min Nitec or Diploma in Engineering (e.g., Electrical/Electronic, Precision, Manufacturing, Mechanical, or Mechatronics).
  

Responsibilities:

• Perform box-build assembly and/or testing.
• Follow work instructions and production drawings under guidelines.
• Operate and control production equipment.
• Support engineers in equipment adjustments.
• Assist engineers in resolving quality issues.

Interested applicants, do send your resume to: [email protected] or telegram @jocelynchan

Jocelyn Chan| Consultant | Recruit Express Pte Ltd (Healthcare & Lifescience)
Company EA Licence number : 99C4599
Personnel EA License: R1331820

Description

▶️ Training provided, aircon environment
▶️ Bi-weekly pay available (every 7th and 22nd)
▶️ Min 3 months, extendable or convertible based on performance

Responsibilities

• Assist in the installation, calibration, maintenance, and repair of automated machinery, robotic systems, and factory equipment, ensuring minimal downtime and optimal performance.
• Diagnose and troubleshoot hardware and software issues in robotic systems and other automated equipment, providing timely resolutions to minimize disruptions.
• Conduct regular maintenance and inspections, updating operational parameters and monitoring systems to ensure equipment operates within specifications.
• Collaborate with the Automation Engineer to support production operations, including the setup and validation of robotic systems and participation in process improvement initiatives.

Requirements:

• Nitec or Diploma in Mechanical, Electrical, or Mechatronics Engineering, or equivalent qualifications.
• Hands-on experience with robotic systems, including basic programming knowledge in PLC, HMI, and control systems, and proficiency in troubleshooting automation-related issues.
• At least 3 years of experience in process control, automation, or robotics, preferably within the manufacturing industry.
• Strong technical, problem-solving, and communication skills, with the ability to work independently and collaboratively in a fast-paced environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QYXY7X65

Working Days: Monday to Friday

Working Hours: 8:00am to 5:00pm

Salary: $2,700 – $3,000 + Allowances

Other benefits: Incentive, AL, Yearly increment, Yearly bonus etc.

Address: Gul Cres, Singapore 629532 (Gul Circle)

Company background:

A leading Singapore-based Agrochemicals (Pesticide & Fertilizer) Manufacturing & Trading Company.

Job Scope:

• Testing of different materials purchased by company for production of pesticide & their packing as per set specifications.
• Documentation of testing and their findings in according to ISO system and reporting of results to supervisor/ seniorResults shall be traceable to raw data
  All results shall be recorded in print format as well as Soft files
  
• Calibration of lab equipment's on periodic basis and maintain records of such activitiesMaintain Internal calibration record for HPLC, GC, UV, pH Meter etc.
  Train new staff on calibration of different equipment
  
• Record of stock of glassware, chemical, solvent, reference standard and other relevant consumables for smooth operation of laboratory activitiesEnsure all stocks are updated on last working day of every month
  Generate report and discuss for requirements to keep minimum inventory for different materials including chemicals, glassware, reference standards
  
• Co-ordination with production/ warehouse for smooth operation at production floorEnsure activates in lab shall be as per work allocation based on WOSU
  Ensure reports are shared with production promptly
  
• Inform any anomalies to production supervisor/ senior for immediate corrective action
• Ensure all test methods/standards used in lab are validated or supported by some valid reference, if any deviations observed make a not and take corrective action and ensure such deviations do not repeat in futureReport deviation to superior and take corrective action as per discussion, make record of deviations in NCR and record Corrective actions in CAR forms
  
• Use only reference standard with traceability to A- Standards and maintain a minimum quantity of reference standardTesting of technical material to create secondary standard and maintain record of such activity
  Ensure all secondary standards are traceable to A-Standards
  Ensure all A-Standards should have COA through out there shelf life, maintain record of A-Standard consumption
  
• Co-ordinate with outside labs for smooth functioning of production and day to day operations as per requirement
• Training of new staff and help them familiarize with company policies and proceduresIdentify short comings or training need of new staff from day to day work practice
  Communicate training needs with Manager/ Senior
  Decide on training schedule and source of training internal or external with Manager/ Senior
  
• Report your daily work and problems faced, to your supervisor/ senior for quick and long term solution
• Operation of WWT plant and testing of waste water samples as and when requirement arise

Job Requirement:

• Nitec or Diploma in Chemical engineering/ bioscience and relevant
• With 1 year experience is preferably
• Short notice is advantageous

Low Jia Yi R22104302

The Supreme HR Advisory Pte Ltd 14C7279

Technician/Electricians

Location: One North

Working Hours: 5 days a week (830am-530pm or 10.30am- 7.30pm), including Saturdays

Job Description:

• Installing, maintaining, and repairing electrical control, wiring, and lighting systems
• Performing general electrical maintenance.
• Inspecting transformers, circuit breakers, and other electrical components.
• Troubleshooting electrical issues using appropriate testing devices.
• Repairing and replacing equipment, electrical wiring, and fixtures.
• Assist with some toilet repairing (toilet flush, sink etc)
• Help out with pest control and plant management outside of office building
• Maintaining good knowledge of heating and air conditioning systems as well as various testing equipment.

Interested applicants may apply, alternatively you may send in your CV to bexlyn.chiu[at]revup-proservices.com

Bexlyn Chiu

R1985241

EA 24C2366

1. experience in equipment servicing/ repair sector

2. Able to perform preventive maintenance check

3. Trouble shooting

4. knowledge on electricial

5. knowledge and experience with machining

6. automotive technician background

7. hardworking

8. driving licence

Responsibilities

• Execute job assignments using appropriate service tools with precision and care.
• Oversee the installation of electrical components, such as switches, sensors, transmitters, alternator parts, and control panels.
• Assist in assembling and disassembling key engine components, including oil pumps, water pumps, and cylinder heads, with experience in engine overhauls preferred.
• Conduct the installation and adjustment of engine fuel injectors, timing, and valve lash.
• Support and perform the mechanical installation of radiators, engines, alternators, gearboxes, and related piping and couplings.
• Align equipment, such as radiator assemblies, engines, and alternators, ensuring proper setup and operation.
• Prepare generators for load testing and carry out required safety and diagnostic tests while recording necessary parameters.
• Troubleshoot and maintain knowledge of engine and alternator systems, hydraulic steering systems, and marine gearboxes for issue resolution.

Requirements:

• Possess an ITE qualification or equivalent certification in a related field.
• 2 years of hands-on experience in heavy-duty diesel or automotive mechanics, with marine or offshore exposure preferred.
• Prior apprenticeship with a recognized engine-related organization will be an added advantage.
• Proficiency in IT systems and knowledge of programmable logic controls will be beneficial.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: L84VX85R