• Carryout maintenance, repair and overhaul work on heavy vehicles (euro 4-euro 6), ensuring high standard of workmanship and minimize turnaround time for scheduled repairs and inspections to meet workshop’s service standards and according to job order.
• Notify Team Leader of unusual repair problems which will require major repair and replacement parts recommendation.
• Adhere to defined guidelines in regards to safety, orderliness and etc.
• Complete work order for each vehicle and unit serviced

Requirement:

• NTC 2 or NITEC 2 in Automotive Technology
• 1-3 years experiences in commercial vehicle repair and service
• Able to use and troubleshoot electrical/ technical issue with diagnostic tool.
• Preferably with Class 3 & 4 Driving License (preferred, not mandatory)

Our Client is in the Manufacturing Industry. Due to their current expansion plan, they are looking for a Repairing Technician to join their team, in hopes of developing the current high performing team. They are located in the West.

Resbinsibilities

• Select, use, and maintain various service tools appropriately to carry out job assignments.
• Install electrical components such as switches, sensors, transducers, transmitters, current transformers, alternator parts, and control panels.
• Perform engine wiring installation according to provided drawings
• Disassemble and assemble engine components, including oil pumps, water pumps, cylinder heads, etc.
• Install fuel injectors and perform engine timing and valve lash adjustments.
• Assist with and execute mechanical tasks such as installing radiator assemblies, couplings, engines, alternators or piping
• Assist with and perform alignment tasks for radiator assemblies, engines, and alternator installations.
• Conduct safety device tests and load tests, including recording required parameter readings
• Connect ET tools to engines to view diagnostic codes, events, and file data
• Demonstrate knowledge of Hydraulic Steering Systems, Marine Gearboxes, AC Power Alternators, alignments, and control panels.
• Perform general servicing of engines and alternators.
• Any Ah-hoc duty as given

Requirements

• Min ITE or equivalent qualification.
• Minimum 3 years of hands-on experience in heavy duty diesel or automobile mechanics

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Singaporean Only

Job descriptions

• Carrying out maintenance, repairing and servicing tasks (Electrical /Aircon / Mechanical / Building / Repairs).
• Carry out preventive / breakdown and corrective maintenance of M&E works or Aircon or Building.
• To carry out maintenance operations for facilities or buildings , including troubleshooting and repairing mechanical, electrical, and plumbing systems
• Attend to defects and customers' complains promptly. Respond to any fault reports, client requests, or any breakdowns efficiently.
• Performing regular maintenance and repairs on the building facilities or systems to ensure smooth operation. Reporting any fault issues to the supervisor.
• Conduct preventive checks and troubleshooting on the M&E systems.
• Record or inform supervisor of any faults or issues during routine checking.
• Perform any other ad hoc duties assigned

Requirements

• Minimum 2 years and above in Facilities Maintenance or Engineering company
• Minimum NTC/ ITE/ NITEC/ HIGHER NITEC/ VOCATIONAL CERTIFICATE in Mechanical / Air-Con / Electrical / Building / Facility Management or maintenance
• Shift works , 2 Day shifts , 2 Night Shifts , 2 Off days.
• East Side - report for day shift location in Changi . Northern Central - report for night shift near Whitley Road.
• SIngaporean only

OT Pay and Bonus!!

Job Description

• Perform Electrical Works including wiring and assembly work
• Set up and install Surveillance equipment and systems
• Maintain and perform troubleshooting for Surveillance equipment and systems
• Any ad-hoc duties as assigned

Requirements

• Min. Diploma in Electrical/Electronic Engineering
• Min. 2 years relevant experience
• Preferable with Class 3 driving license
• Ability to work independently and as a team-player
• Able to perform shift work and work on weekends & public holidays

If you are a cheerful, initiative and strong integrity person who likes to meet new people and are able to contribute by fulfilling clients’ needs, join us!

Job Description:

• The candidate will be fully accountable for the overall result of each project and will be expected to regularly monitor and review progress
• Projects must be delivered on time, within budget and in accordance with the contract scope where necessary take action to mitigate on overspends in costs
• Candidate must be proficient in contract management leading teams to fulfil them
• Manage the preparation and maintenance of reports necessary to carry out the functions of the department. Prepare periodic reports for management, as necessary or requested, to track strategic goal accomplishment
• Maintain a leadership role in all aspects of risk management. Ensure operations are conducted in accordance with our safety program and focused on providing a safe work environment
• Plan, evaluate and improve the efficiency of department processes and procedures to enhance quality and efficiency
• Schedule routine and preventive maintenance as needed. Establish and maintain a work order system to fulfil repair requests
• Prepare and deliver technical presentations
• Provide pre-sales technical assistance and product specification
• Attend site and technical meetings with project team for smooth operation
• Work on after-sales support services and providing Technician’s help
• Ensure that all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements

Requirements:

• Applicants need to be able to work overtime/Night Shift.
• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering (Civil) or equivalent
• At least 3 Year(s) of working experience in the related field is required for this position
• Experienced in Lift, Escalator and Elevators Maintenance activities and contract management is a MUST

Other Information:

• Location: Kaki Bukit or as needed
• Working hours: 44 hours per week (Follow Company’s Arrangement)
• Salary (commensurate with experience): Basic salary + OT allowances + Variable Bonus

Resumes please INCLUDE:

• Personal particulars
• Education background
• Work experiences in point forms
• All reasons for leaving
• Current and expected salary
• Date of availability / Notice Period

Interested applicants are invited to send your updated resume in MS Word format via Apply Now. We regret that only shortlisted applicants will be notified.

Element has an opportunity for a Metallurgy Technician. In this role, your primary responsibility is to perform routine, metallurgical, mechanical, failure, corrosion testing facilitating metallurgy operations at site or at a laboratory.

This role is based in Tuas location.

Job Duties:

• Perform routine mechanical testing (tensile, bend, charpy impact, hardness) including CTOD and metallurgical testing (micro / macro examinations) Involvement in site / field testing
• Coordinating with the technicians in the team to carry out work as per the planning schedule and assist with hazard identification and risk assessment exercises within their areas of responsibility
• Conduct either or combination of testing, analysis, calibration, monitoring, sampling and collection and sample preparation as directed
• Carry out routine laboratory tests, analysis, machining or preparation in line with authorized technical competence
• Carry out daily sample collection and ensure work compliance to ISO 17025 requirements

Job Description:

• Possess a minimum of Diploma in Metallurgy or related discipline, with 2-4 years of relevant working experience
• Good knowledge on international standards and codes
• Possess driving licence
• Good communication skills
• Self-motivated team playing with excellent organisational and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Key Responsibilities

• Responsible for assembly, testing and basic trouble shooting of instruments.
• Manufacturing process materials quality control.
• Manufacturing materials control.
• Meet production quantity targets as per daily production plan.
• Recommend and implement solutions to enhance product quality.

Requirements

• Higher NITEC/NITEC in Mechanical/Electronics Engineering.
• 3 years of relevant working experiences.
• Team player and collaborative skills.

At Otis, it’s our people that make us different. Come and join OTIS today and be part of the Forbes 2024 World's Best Employers!

Join the Otis family where collaboration, innovation, and empowerment help each individual and the company reach new heights.

About You

You will report to Service Engineer and be part of the service team. You are responsible to provide technical support for servicing, maintaining and repairing of elevators and/ or escalators as assigned.

Key Responsibilities

• Maintain, service and repair the elevators, escalators and mechanical-parking systems that includes checking, oiling, greasing, mechanical adjustment, trouble-shooting, testing of safety devices, inspection and parts recommendation and replacement in accordance to local code of practice
• Demonstrate understanding and compliance of Environmental, Health and Safety (EH&S) procedures
• Attend to breakdown maintenance calls at various job sites
• Support Service Operations Team to achieve department objectives on service sales targets and service quality standards

Requirement

• Diploma/ Higher Nitec in Vertical Transportation/ Engineering or relevant disciplines
• A valid CoC Certification
• Min. 2 years of work experiences in servicing and maintaining elevators and escalators
• Basic English Proficiency
• Team player, adaptable and agile

· Provide repair, servicing for building systems & facility maintenance records for traceability needs.

· Supervise term contractors in repair and testing of M&E services.

· Attend to fault reports, breakdowns, and customer service requests.

· Ensure compliance with building and fire safety rules.

· Responsible in overseeing all aspects of safety to ensure compliance to the Workplace and Health Act and other safety related statutory legislations.

· Conducting audits in facilities on relevant risks and support and work with facilities to mitigate these risks.

· Maintaining comprehensive schedules, records and reports on safety and environment management activities.

· Monitor and escort external sub-contractors in carrying out repair and maintenance works within SKTC’s premises.

· To provide support to Property Officers to manage the day-to-day estate operational matters in the Division.

· Ensure all works are carried out safely and in accordance.

· Work closely with Procurement and Admin department to be cost efficient for repair and maintenance tasks.

· Any other related duties as instructed by your HOD

Field Fault analysis - put your investigative traits to the test by determining the cause of failure behind instruments and equipment.

Field calibration of instrument - Be involved in projects, calibrate and install instruments to valves.

Instrumentation includes Pneumatic, Electronical and digital equipment.

Job Description:-

• Provide equipment support to production including preventive maintenance, repair, replacement, communications with suppliers
• Provide facility support including new installations, repair and replacement of damaged components
• Ensure PM activities are carried out according to PM Schedule
• Arrange Calibration activities with Supplier, perform internal verification
  support facility maintenance activities
• Able to read and understand Technical Manual and Work Instructions
  Able to read Electrical Schematic diagrams for electrical/electronic equipment
  Able to perform equipment troubleshooting, and repair where applicable
• Any other ad-hoc task assigned

Job Requirement:-

• NITEC/Diploma in Mechatronic, Electrical, Mechanical, Electronic Engineering etc.
• Minimum 1-2 years of related experience in trouble-shooting and maintenance activities of mechanical and electronic equipment will be given prior consideration
• Keen in learning, team player, self-motivated with good interpersonal and communication skill
• Willing to hands-on and work with tools

About the Company

Casa Creation is the authorized distributor for SK Magic, one of the world’s most advanced home appliance makers originating from Korea. Combining sleek design, effortless use, and amazing health benefits, we believe that our SK Magic product range - particularly state of the art water and air purifiers - are the fast-rising appliances of the future in today’s hectic yet discerning society.

Vision

Creating a clean and safe living environment, through the pursuit of fundamental health care

Core Values

1. Health: We believe in creating a clean and safe environment, through the pursuit of fundamental
   health care
2. Eco-Friendliness: Our products reduce resource consumption, minimise pollution and reduces the production-use-disposal process.
3. Convenience: We aim to minimise labour for all our customers, creating a seamless experience and curating our products to suit each of your needs.

Responsibilities

• Install company water purifiers on-site, including set up of parts, troubleshooting, and quality checks.
• Perform routine maintenance, such as inspecting parts, checking, and replacing filters.
• Perform repair works as necessary.

Skills Required

• Minimum 1 year experience in plumbing or related technician work.
• Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
• Customer oriented with positive work attitude.

Other Requirements

• Possess a valid Class 3/3A driving license.
• Able to work 5.5 days a week.

Our Client:

• Elevators Industry
• 5 days, 8.30am-5.30pm
• Kaki Bukit MRT
• $2300 + Transport allowance + Laundry allowance
• Work & Study Program

Responsibilities:

• Applicants are expected to commit to working as trainee technicians for escalators and elevators and also attend classes for their studies.

Requirements:

• Applicants should have Nitec, Higher Nitec, or Diploma qualifications and must have finished or been excused from full-time NS
• Must be fit to work at height

For interested applicants, please click "Quick Apply"

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Nurul Asilah Binti Ismail | EA Reg No: R24121710

JTE Recruit Pte Ltd | EA Lic No: 14C7215

Responsibilities:

· In-charge of Production Equipment Uptime and Maintenance, doing Repair & Service.

· At all time, follow Operation, Quality & Safety regulations, while maintaining the Equipment.

· Check Equipment hardware, socket and handler device setup at start of shift.

· Troubleshooting for the Handler when alarm occurs. (Site jam, device missing, machine overheat, machine timeout, double tray…etc).

· Write down record per shift and report to the Operation Supervisors.

· Monitor the Equipment/Handler performance for highest performance.

· Change the hardware with preventive maintenance team when necessary.

· Set-up. (Alignment, maintains down sites, change Device setup, adjust offset…)

· Check & verification of the traveller data is correct (step by step).

· Follow OJT & SPEC procedures to perform the required tasks

· House keeping at end of shift, and teamwork with operation to ensure quality & safety.

· Handle other Backend Equipment/Tools to support Production.

· Any additional tasks as assigned by the manager or management.

Requirements:

· Minimum Diploma in Engineering or equivalent

· 1 to 2 years of related working experience in the semiconductor industry is preferred.

· Prior hands-on experience in Test Production manufacturing (i.e. mechanical/electrical, troubleshooting) (Tester, Handler and Final Test Backend Equipment/Tools)

· Able to demonstrate good communication, organizational, and interpersonal skills

· Experience in either a Semiconductor Final Testing Environment or Manufacturing industry

· Willing to work in Cleanroom environment

· Able to perform a 8 hours rotating shifts(Both day & night shift), or

Able to perform a 12 hours rotating shifts(Both day & night shift), when business needs

Maintenance Technician

Responsibilities

• Servicing and repairing industrial cleaning equipment such as high-pressure jet, leaf blower, scrubbing machine, vacuum cleaner, battery operated cart and etc
• Inspecting and assessing the functionality of equipment
• Troubleshooting machineries breakdowns
• Conducting routine maintenance and safety checks
• Preparation and submission of maintenance reports
• Liaise with external vendors for necessary equipment repair
• Inspect and monitor quality standards of equipment / tools
• Perform asset tagging to ensure accountability of equipment
• Prepare inspection finding reports and communicate with internal staff / vendors on any faults, and follow up to ensure rectification
• Any ad-hoc assignments

Requirements

• Valid Singapore Class 3 Driving Licence
• Minimum 2 years of experience in similar capacity and relevant knowledge in electrical and mechanical.
• Good communication and organisational skills
• Basic computer and report writing skills.
• Good time management and planning skills
• Hands-On Physical work required
• Driving company lorry (manual)
• Working hours: 8am to 8pm (Monday to Saturday)

Summary of the role

Carrying out maintenance, inspection and basic repair work for company’s electrical and mechanical vehicle systems

Task and Activities for the role

• Experience with prestige vehicles

• Inspection of components for wear and tear

• Repair/ replacement of broken/ worn out parts

• Verification of vehicle functions and its subsystems

Reporting and Interface

• Provides information to the supervisor about preapproval for additional repair

• Notifies the Service Advisor immediately of work interruptions as a result of additionally required work, complications, missing parts or missed deadlines

Acts diligently according to guidelines

• Uses checklists/ repair instructions, tools and test equipment adhered to current guidelines

• Has co-responsibility for customer satisfaction by optimal technical solutions on customer vehicles

• Handles tools, special tools work clothing etc. properly

• Uses equipment cost- effectively

• Hands over dismantled, replacement or warranty parts to warranty department cleaned and labelled

• Disposes waste according to local legislated guidelines

• Observes accident prevention guidelines and reporting incidents to his or her supervisor

Qualifications

• Technical training (as automotive technician, industrial technician)

• Vocational training at an automotive dealership or at a similar facility

• Driving licence

• Team orientation and customer focused attitude

• Have the required experience and skills level to carry out maintenance , inspection and basic repair

5.5 days

Mon to Fri 8.30am - 5.30pm

Sat 8.30am - 12.30pm

Job Description for Seatrium Digital IOT Field Service Technician

An IoT Field Service Technician is responsible for installing, configuring, maintaining, troubleshooting IoT devices such as Facial Recognition (FR), smart cameras, sensors, network devices, industrial IoT sensors and equipment. The role requires technical expertise, problem-solving skills, and the ability to work with both hardware and software components of IoT systems.

Key Responsibilities:

1) Installation and Setup:

• Install and configure IoT devices, sensors, and networks according to stakeholder requirements.

• Perform system integrations, ensuring that devices is able to communicate with the yard central system.

• Ensure network connectivity ie routers, Access Points, wi-fi is properly established for IoT systems.

2) Troubleshooting and Maintenance:

• Diagnose and resolve issues with IoT devices, networks, or platforms, both remotely and on-site.

• Conduct regular inspections and maintenance of IoT devices and systems to ensure optimal performance.

• Perform firmware and software updates on devices as needed.

• Address and resolve connectivity issues, sensor malfunctions, and data reporting errors.

3) Customer Support:

• Provide technical support and training to stakeholder on how to use and maintain their IoT devices.

• Address stakeholder inquiries and concerns, either on-site or remotely, ensuring satisfaction and efficient problem resolution.

• Assist with the integration of IoT systems into existing infrastructure and applications eg digital twin platform

4) Documentation:

• Maintain good records of all service activities, including installations, configurations, maintenance, and stakeholder interactions.

• Provide reports on system performance, usage patterns, and any potential improvements.

• Document troubleshooting steps, solutions, and maintenance schedules.

• Check on System upgrades and System Optimization from vendor

Required Skills and Qualifications:

• Technical Knowledge: Familiarity with IoT devices, sensors, cloud-based platforms, and networking protocols

• Troubleshooting Skills: Strong problem-solving abilities, especially in identifying issues with hardware, software, or connectivity.

• Communication: Ability to explain technical issues and solutions to stakeholder clearly and concisely.

• Networking Knowledge: Understanding of network infrastructure, IP addresses, routers, and firewalls.

• Hands-on Skills: Comfortable working with hardware, including installation, wiring, and setup.

• Field Service: Safety- oriented, need to have interpersonal skills to interact with stakeholders like P&M, Security, Ops teams to coordinate work task

Responsibilities:

1. Inspect, maintain, and repair diving equipment, including helmets, compressors, regulators, and umbilicals.
   Conduct pre-dive and post-dive checks on all equipment.
   Assist in setting up and dismantling diving systems during operations.
   Provide technical support to divers during underwater activities.
   Ensure all equipment meets industry safety standards and certifications.
   Maintain accurate records of equipment maintenance and safety checks.
   Diagnose and resolve technical problems with diving systems promptly.
   Provide immediate support in emergency situations related to equipment malfunction.
   Stay updated on industry advancements and technologies in diving equipment.
   Train and guide junior team members on equipment handling and safety practices.
   

Qualifications:

• Diploma or technical certification in mechanical, electrical, or marine engineering.
• Minimum 2-3 years of experience as a Diving Technician or in a similar technical role.
• Familiarity with surface-supplied diving systems and saturation diving equipment.
• IMCA-approved Diving Technician Certification (preferred).
• Basic Offshore Safety Induction and Emergency Training (BOSIET) or equivalent.
• Strong understanding of diving systems and equipment.

Job Responsibilities:

• Installation, termination and performing the electrical wiring for control panel, instruments and machine per drawing.
• Assembly and installation of the components and fittings.

Multinational corporation
Basic + AWS + Variable Bonus + Overtime
Good benefit & welfare including medical insurance

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Job Description:

• Performs product conversion, machine & process set-up per production order / requirement

• Operates the machine & performs in-process inspection during production

• Ensures quality product is manufactured on schedule to fulfil customer’s requirement

• Assist the Engineer in performing equipment maintenance, process trouble-shooting

• Responsible for equipment repair & maintenance when required

• Ensures good housekeeping & proper segregation of wastes

• Responsible in helping the organization conserve energy & resources

• To comply with all Quality, Environmental, Health, Safety & Security Policies & procedures of the company

Qualifications / Requirements:

• ITE / Diploma in Engineering

• SPM equivalent / GCE “O” level

• Minimum 2 years of experience in manufacturing, mass production in cleanroom environment, preferably in Semi-con / Electronics industry

• Able to handle maintenance & repair tools

• Able to understand & use basic measuring equipment

Working hours:

12 hours Shift (8am - 8pm, 8pm to 8am)

Permanent Day or Night shift

Shift pattern - 3/4/4/3

Our company is currently looking for Maintenance Technician(s) to be station in Changi Airport. The successful candidate will be responsible for the operation and maintenance of the Passenger Boarding Bridges (PBB).

Job responsibilities:

· Carry-out routine preventive maintenance as per standard operation procedure for Passenger Boarding Bridge.

· Respond to emergencies, break-downs and malfunctions of Passenger Boarding Bridge.

· Perform trouble shooting and equipment failure check.

· Conduct visual check on all hardware of Passenger Boarding Bridge after maintenance services.

· Update and maintain spare parts inventory to ensure that necessary components are readily available for repairs and maintenance.

· Record all faulty arise and maintain proper maintenance records.

· Strict adherence to safety rules and regulations

· Any other task as assigned by immediate supervisor/management.

We regret to inform that only short-listed candidates will be notified.

Requirements:

· Min NITEC in Engineering / Electrical / Mechanical / Automotive / Air-Conditioning / related fields

· Min 2 years relevant working experience

· Strong hands-on technical skills

· Proactive attitude

Other Information:

· Location: Changi Airport

· Working hours: 5 days

· Permanent position

· Supervisor position available for candidates with more experience

Job Description & Requirements:

• PC / Notebook / AIO system diagnostic.
• Assist and advising customer the best solution for their repair / upgrade / customization.
• Handling of hardware and software installation.
• Training will be provided.
• Basic Salary + High Commission + Variable Performance Bonus
• 5 days/6 days work week
• Medical Benefits
• Staff Purchase Discounts

Job Responsibilities

• Performing Adjustment, Testing and Commissioning works on Lift and Escalator
• Ensure all Lifts & Escalators installed are safe for public usage through stringent quality checks
• Carry out Testing of Lift & Escalator in accordance with company guidelines and to fully comply with local building code and regulation
• Complete all required documentations of test carried out for submission
• Record abnormalities or defective parts for rectification or replacement works to be carried out
• Other duties as required

Job Requirement

• Candidate must possess at least a NITEC in Mechanical, Electrical, Mechatronics Engineering or NITEC in Building Environment (Vertical Transportation) or equivalent
• Preferably with Minimum 2 years of relevant work experience in engineering sector
• Physically fit and able to work in a Building Construction environment
• Required to work at height and wear all necessary safety PPE
• Required to move and carry heavy test weights
• Must be able to work in a team
• Candidate to be Mature, Responsible and Disciplined

Interested applicants are invited to send your updated resume in MS Word format via APPLY NOW.

We regret that only shortlisted applicants will be notified

We are seeking an experienced Marine Technician to join our team at MODERN AUTOMATION AND ENGINEERING PTE LTD in Singapore. The role involve providing technical support and maintenance for marine equipment and systems.

What you'll be doing

• Perform inspections, troubleshooting, and maintenance on a variety of marine equipment and systems onboard vessels.
• Troubleshoot and repair equipment malfunctions.
• Maintain accurate service records and documentation of inspections and repairs.
• Collaborate with the operations team
• Adhere to all safety protocols and procedures
• Adhoc tasks by supervisors

What we're looking for

• Min. Diploma in any field of Engineering / Proven Experience
• Strong knowledge of marine equipment, systems, and technologies
• Proficient in electrical, mechanical, and electronic troubleshooting and repair
• Ability to read and interpret technical manuals and schematics
• Excellent communication and teamwork skills
• Relevant technical certifications in marine electronics or mechanics are preferred.

Job Description

• Perform Electrical Works including wiring and assembly work
• Set up and install Surveillance equipment and systems
• Maintain and perform troubleshooting for Surveillance equipment and systems
• Any ad-hoc duties as assigned

Requirements

• Min. Diploma in Electrical/Electronic Engineering
• Min. 2 years relevant experience
• Preferable with Class 3 driving license
• Ability to work independently and as a team-player
• Able to perform shift work and work on weekends & public holidays