Primary Purpose

-Looking for New/experienced Automotive Technicians (Ex Army Technicians are ideal)

-To conduct automotive maintenance and repair, inclusive of preventative maintenance servicing to vehicles.

-To test and ensure vehicles are properly maintained/repaired to satisfaction.

Qualifications/Education/Certification/Licensure

- No certification required, however AUTOMOTIVE NITEC or diploma holders preferred

- Valid Driver's license (Class 3) or ability to obtain within six months of hire is advantageous

Special Knowledge/Skills Effective communication and interpersonal skills.

-Understand and execute verbal and written instructions.

-Cooperative and show initiative towards improving skills.

-Ability to work productively with minimal supervision.

Experience

No experience required. 3-5 years in the automotive industry preferred.

Major Responsibilities and Duties

1) Perform basic care and maintenance, including changing of oil, replacing of filters and checking oil/fluid levels.

2) Repair/Replace worn or defective parts such as brake pads, sensors and other vehicle parts as required.

3) Troubleshoot and rectify any vehicular faults.

*Please note that new hires may require a Lead time of 2 months before commencement of work*

Please contact +65 80797407 for any enquiries.

Job Responsibilities:

• Installation, termination and performing the electrical wiring for control panel, instruments and machine per drawing.
• Assembly and installation of the components and fittings.

Multinational corporation
Basic + AWS + Variable Bonus + Overtime
Good benefit & welfare including medical insurance

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Job Description & Requirements

Key Responsibilities:

1. Attend to troubleshooting and repairs of equipment

2. Respond to fault calls promptly

3. Provide hands on preventive maintenance service on equipment deployed

4. Ensure good quality of work and abide to safety and environmental regulations

5. Provide and maintain good customer support

6. Any ad-hoc and other duties as assigned by the company

7. Willing to work on night shift

Requirements:

1. A good team player with positive attitude

2. Possess good problem-solving and analytical skills

3. Possess valid driving license will be an advantage

Boiler Technician

for Operation of Industrial Power Plant

We are:

Engineering company specialized in Steam Boilers and Combustion Systems. We have engagement for Operation and Maintenance of Industrial Power Plant with Steam Generation.

Work Scope:

• Supervise operation of Gas Turbine for Power Generation and Waste Heat Steam Boiler.

• Join our team of Technicians for 24 hours operation of the power plant.

• Work will be in 12 hours shift from 8 to 8

• Operation of the plant as per Standard Operation Procedures.

• Perform inspections as per check list.

• Report of any abnormalities to the plant manager.

• Participate in preventive maintenance

• Recording of the plant performance parameters and daily activities.

Work Place:

• Within Tuas Medical Park

Requirements:

• Class 1 or 2 Boiler Attendant Certificate of Competency

• If experience in boiler operation and interested in obtaining Boiler Attendant Certificate.

• Technical competency

• Diploma in Mechanical / Electrical Engineering

• Experience of operation / maintenance of machinery and technical installations.

• Able to work independently

Employment Terms:

• Salary range SGD 4,000.- to 5,000.- based on experience / qualifications.

• Annual Performance Bonus

• Transport allowance

• Overtime allowance

• We will provide on-job training.

Objectives:

• Operating the Antioxidant (AO) manufacturing plant and ensure compliance to all production, Environment, Health & Safety (EHS) and quality standards
• Basic experience in Panel Distributed Control System (DCS) and field operations for all the production lines to progressively attain full familiarity with both panel DCS and field production operations

Responsibilities:

• Operates the production units in accordance with local and company’s EHS rules and regulations, Standard Operations Procedures (SOPs) and as instructed by the Production Engineer
• Good knowledge of process flow of all production units including tank-farm, utility to fulfils the tasks as follows:Familiarity with Emergency procedures for the safe operation and shutdown of units through DCS.
  Perform field operator routines such as raw material and catalyst filling, SAMACO rounds, preparation of equipment for Lock Out Tag Out (LOTO), 5S rounds, filter change outs etc.
  Ensure the correct usage and maintenance of PPEs for all the associated field tasks.
  Learn and Operate Delta V to control process units under close supervision of Senior/Lead Technician.
  Understand the EHS risk associated with their tasks by reading the respective EHS risk assessment.
  Coordinate and work with the team members and contractors to complete plant tasks in a safe and timely manner.
  In case of emergency, performs the activities of a firefighting brigade member after shutting down the plant safely as per the emergency shutdown procedure.
  Perform in-process sampling and testing.
  Perform simple maintenance jobs, opening and boxing up of equipment, handles tools in accordance with safety requirement.
  Troubleshoot where required; initiate corrective measures in accordance with his supervisors and maintains proper documentation trail; update process log-book and hand over documents.
  Participate in plant safety activities and housekeeping and safety programs
  Report all accident, injury, near miss, unsafe conditions and behavior to immediate Supervisor so that remedial actions can be taken to eliminate risk. Ensure full compliance to plant EHS programs such as Behavior Based Safety (BBS) / Hazard Elimination and Control Card (HEC)

Requirements:

• Diploma in Chemical Engineering, Chemistry or other related engineering qualification (e.g. NITEC)
• Minimum 3 years of working experience within Chemical Plant
• Basic understanding of chemical processes
• Able to use Microsoft Office. Experience in SAP PM module will be an added advantage.
• Able to work at Jurong Island.
• Able to work 24/7 shift schedule
• Open to fresh graduates

Responsibilities:

• Install and assemble components into sub-assemblies.
• Integrate the assemblies or components to ensure functionality.
• Align and calibrate mechanical components to achieve functionality.
• Perform coiling of the FCVA filters.
• Fabricate, size, install, and integrate gas, cooling water, and vacuum piping into the machine.
• Conduct vacuum and water leak checks.
• Disassemble and pack the machine.
• Perform additional component steps, such as polishing, filling, and sanding to achieve the required fit.

Requirements:

• "O" Level/Higher Nitec or equivalent in Mechanical, Mechatronics, or Engineering-related fields.
• Proven experience in assembly, integration, and calibration of mechanical components.
• Proficiency in mechanical assembly and sub-assembly processes.
• Experience with gas, cooling water, and vacuum piping fabrication and installation.
• Familiarity with vacuum and water leak testing procedures.
• Ability to perform polishing, filling, and sanding for component fitting.
• Ability to work in a hands-on manufacturing environment.
• Comfortable with occasional heavy lifting and machine disassembly/packing tasks.
• Adhere to safety protocols and quality standards.

Responsibilities

• Assist in advanced rehabilitation therapies, including hydrotherapy and physiotherapy.
• Support the creation of tailored treatment plans for pets.
• Monitor animal progress and ensure accurate, detailed documentation.
• Contribute to maintaining a positive and stress-free clinic environment for pets and their owners.

Requirement:

• AHPC Certified Physiotherapist
• Passionate in helping animals
• Working Arrangement: 1 weekday off + 1 weekend off (can choose)
• Proactive individuals who love working hands-on with animals in a therapeutic setting.

TELE me at @yijingggggg or WA me at https://wa.me/+6598623556 NOW!
Interested candidates, please submit your resume to [email protected]

Alison Chen
Specialist Recruiter
CEI Reg No: R25126657
Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Process Technician / Assistant Process Engineer

Salary: $2,000 - $3,000 + AWS + Bonus

Working Days: Monday - Friday (8.30am - 6.15am)

Working location: Ang Mo Kio Industrial Park 2

Responsibilities

• Perform Lapping / Polishing process, machine installation and training.

Experience & Qualification

• Min. Higher NITEC / Diploma in Electrical or Mechatronics discipline graduates or any technical qualification in Precision Engineering.
• Knowledge of Mitsubishi or Siemens PLC is added advantages.
• Preferred candidates with min 2-3 Years Working Experience in Precision Engineering machine operation or machinery servicing.
• Can read technical drawing
• Able to use the measuring tool example micrometer, height gauge, CMM
• Knowledge on using AutoCAD

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Job Description

• Industry/ Organization Type: Manufacturing – Air Compressor
• Position Title: Service Technician/ Field Service Engineer
• Working Location: Islandwide (Office at Tuas)
• Working Hours: 5.5 days (Mon – Fri: 9.00am – 6.00pm, Sat 9.00am – 1.00pm)
• Salary Package: Up to $4000 + OT + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Provide on-site support including the installation, start-up, testing, and commissioning of compressor and dryer units.
• Conduct troubleshooting, preventive maintenance, and repair of air compressors and refrigeration dryers, focusing on mechanical, electrical, and pneumatic systems.
• Respond to service calls and perform routine servicing at customer sites.
• Assist in overseeing the production process to ensure minimal breakdowns.
• Prepare and submit detailed repair and maintenance quotations for service and spare parts sales.
• Efficiently plan and coordinate individual service jobs on a weekly and daily basis.
• Conduct technical training to customers as necessary.
• Other ad-hoc duties which may be assigned.

APPLY NOW!!!

• Minimum NiTEC, Diploma or Bachelor’s Degree in Engineering (Mechanical) or Engineering (Mechatronics/Electromechanical).
• At least 2 years of relevant experience.
• Possess Class 3 driving license.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71131 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Aerospace Repair Technician

Responsibilities

1. Repair Aviation Components:

• Perform repairs on aviation components in compliance with relevant CMM and the company’s Maintenance Organization Exposition (MOE)

2. Compliance with Procedures:

• Strictly adhere to all company and aviation authority regulations and procedures.

3. Administrative Duties:

• Complete administrative tasks with a high level of accuracy and ensure timely reporting of information.

4. Discrepancy Reporting:

• Identify and report any discrepancies promptly to maintain quality and compliance.

5. Production Targets:

• Consistently meet or exceed production targets while maintaining quality standards.

6. Additional Duties:

• Carry out other tasks as assigned, which may include cleaning containers, pallets, or similar activities to support operational needs.

Job Requirements

• Possess a minimum Nitec in Engineering.
• Possess a minimum of 1 year of technician experience.
• No experience? You are welcome to apply, and training will be provided.
• Prior experience in the automotive or aerospace industry is advantageous.
• Good communication and interpersonal skills.
• General welding / Canvas sewing skills (advantageous).

Other Information

• Working Hours: Monday to Friday (8:00 AM - 5:00 PM), Saturday (8:00 AM - 12:00 PM).
• Basic Salary: $2,000 + Fixed Skill allowance + Overtime.
• Training: Provided.
• Work Location: Changi South.

Job Description

• Industry/ Organization Type: Training courses for sports and games
• Position Title: Technician Installer
• Working Location: Jurong East
• Working Hours: 5 days (Monday to Friday 8.30am – 6pm)
• Salary Package: Basic salary up to $2,000 + OT + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Work at heights to install and maintain adventure facilities.
• Inspect, check, and test all safety devices and features.
• Perform additional duties as assigned.

APPLY NOW!!!

• Ability to work at heights.
• Willingness to work overtime.
• Experience in building or installing facilities is a bonus.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70844 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturer (Commercial Cleaning Equipment)
• Position Title: Service Technician/Technician
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15 AM-5:30 PM)
• Salary Package: Up to $2600 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Perform maintenance and repair tasks on various electrical and electronic systems, both outdoors and within the company workshop.
• Troubleshoot issues effectively to ensure minimal downtime.
• All other assigned duties.

APPLY NOW!!!

• Minimum Professional Certificate/NiTEC (Electrical & Electronic Engineering / Electrical Engineering).
• At least one year of experience in customer support and repair of forklifts, automobiles, and heavy industrial equipment.
• Must have knowledge of AC & DC motors, single-phase & three-phase systems, lead acid & lithium batteries, electrical control circuits, and hydraulic systems.
• Possess a Class 3 driving license or equivalent.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65053 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Oil and Gas U.S.A. equipment manufacturer's representative located in Paya Lebar area looking for a Trainee Service Technician.

5 day week (Monday - Friday), 8.30am to 5pm

$3,000 / month

Minimum Polytechnic Diploma preferably in Mechanical Engineering with good command of English.

Only Singaporeans.

Job Description

• Industry/ Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Assemble & Test Trainee/Assembly & Test Technician
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $2,300 + OT + AWS + VB
• Duration: Permanent

Key Responsibilities

• Acquire skills in assembling, disassembling, testing, and installing products safely and efficiently in the field.
• Ensure proper maintenance and storage of tools and inventories.
• Adhere to established procedures and quality standards in all tasks.
• Maintain accurate records, notably tracking serial numbers for each part and fixture.
• Comply with all safety protocols to maintain a secure working environment.
• Keep the workshop clean and organized.
• Handle additional tasks as assigned.

APPLY NOW!!!

• Minimum 'N' Levels or a National Trade Certificate or equivalent.
• Comfortable working in a warm or factory environment.
• Comfortable with hands-on work and capable of handling physical demanding tasks.
• Inexperienced candidates are welcome to apply as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70176 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Veterinary clinic looking for a full-time veterinary technician who is reliable, highly motivated and passionate to join our growing team in providing excellent care and service to pawrents and their furkids. Our clinic sees mainly dogs and cats.

The clinic is equipped with the following:

• IDEXX blood analyser suite
• Digital radiography
• Ultrasonography
• Multiparameter patient monitoring facilities
• IM3 dental machine
• Dental radiography
• Endoscopy
• Dedicated cat wards and dog wards/runs

Responsibilities:

• Ensure the quality patient care and to assist the veterinarian.
• Handling and restraint of pets
• Surgical preparation and anaesthetic monitoring
• Assist with surgical and dental procedures
• Triaging of emergency cases
• Care of hospitalized patients
• In-house laboratory/ diagnostic procedures
• General housekeeping
• Some reception duties

Requirements:

• Minimum of Diploma in Veterinary Technology.
• Minimally 1-2 years work experience
• Able to multitask and work in fast paced environment.
• Passionate about pets
• Computer proficiency
• Effective communicator & great interpersonal skills
• Prefer at least 3 years of relevant experience
• Able to work weekends and weeknights.

Please send your resume with a cover letter and expected salary to [email protected] with Veterinary Technician in the subject line. We regret that only short-listed applicants will be notified.

• Installation of air-conditioning systems (eg. FCU)
• Perform testing and commissioning of air conditioning systems
• Supervise and ensure proper installation works done by the sub-contractors
• Perform servicing, maintenance & troubleshooting of air-conditioning systems
• Diagnose and repair of air-conditioning system
• Feasibility pre-installation design proposal as well as installation works
• Chemical Cleaning & Overhaul Cleaning
• Experience with split unit or VRV servicing
• Ensure proper document, service report for maintenance works
• Attend complaint related to Building Air Con and ventilation works
• Supervise and ensure all works are carried out safely with safety procedures
• Any adhoc duties as assigned by supervisor

Job Description

• Efficiently and effectively manage and operate assigned processing or packaging operation according to the standardized operating procedures, guides and manual
• Ensure the correct cleaning and sanitation of processing equipment are rendered following Good Manufacturing practices

Job Requirement

• A good team player to achieve production targets
• Self motivated and work with least supervision
• Able to be on the feet for long hours
• Transportation provided
• Candidates with relevant experience are preferable
• More focused on attitude rather than educational level
• 5.5 days week with OT's & perks

Preventive Maintenance Technician- Troubleshoot, repair and maintain food production equipment

- Execute emergency breakdown protocols

- Assist in resolving downtime issues

- Clean equipment and maintain equipment hygiene requirements for production use, after installation and/or repairs

- Collate and coordinate maintenance work, at times need to work with contractor

- Comply with cleanliness and safety regulations while setting up and maintaining food manufacturing equipment

- Able to perform ad-hoc duty when require

- Basic electrical and refrigerator knowledge

- Prepare maintenance reports/records in relation to the work assignedRequirements

- Minimum 1 Year of experience in maintenance work and engineering field, preferable in food manufacturing

- “O” leave / NTC3 or NITEC in Mechanical Enginnering

- Able to performance Shift- Willing to learn new skills

- Positive work attitude

Ryobi G is seeking a skilled Field Technician to join our team. In this role, you will be responsible for conducting field utilities detection, identifying and resolving system failures, liaising with construction teams, and compiling data on utility process units.

Job Description & Responsibilities:

1. Conduct field utilities detection to detect existing utilities as per the plan.
2. Report to Utilities Manager on a regular basis.
3. Identify and resolve system failures and perform preventive maintenance.
4. Work closely with utilities agencies to provide updates on progress at construction sites, utilities damages, or unknown services.
5. Liaise and coordinate between the construction team on excavation works, detection work, and reinstatement work near underground or utilities services.
6. Compile data on utility process units, monitoring system efficiency, and energy and material usage.

Requirements:

1. At least 1 year of experience in construction supervision and familiarity with cable detection works would be an advantage.
2. Proficient in Microsoft Office
3. Ability to operate Radio Detection Underground Detector would be an advantage.
4. Educational Qualification or certification; Not compulsory but will be an advantage to have either of the following:

• Diploma in a construction-related course or
• Certification of courses related to Utilities detection, such as a Registered Earthwork Supervisor.

Job Description

• Industry/ Organization Type: Logistics/ Manufacturing & Production
• Position Title: Maintenance Technician/ Facilities Technician
• Working Location: Jurong Island (Company Transportation Provided)
• Working Hours: Monday to Friday, 8 am - 5.45 pm
• Salary Package: Basic Salary + Allowances + OT + Incentive + AWS + PB
• Duration: Permanent

Key Responsibilities

• Perform preventive maintenance and corrective repairs on packaging and conveying equipment, including vehicles, chassis, forklifts, and industrial facilities.
• Troubleshoot and resolve electrical, mechanical, pneumatic, and hydraulic system faults.
• Identify technical issues through inspections and tests; analyze and diagnose malfunctions.
• Use various tools and equipment for diagnosis and repair; order and replace parts, working with suppliers.
• Maintain accurate repair records and parts inventory; communicate findings and repair options.
• Attend to breakdowns, reduce equipment downtime, and enhance performance through quality maintenance.
• Ensure compliance with Health & Safety policies, maintain workplace housekeeping, and follow safe work procedures.

APPLY NOW!!!

• Possession of Diploma, NITEC, NTC-2 or ITC Mechatronic / Electrical Engineering is preferred
• Equipment knowledge - Bagging/ packaging/ conveyor system
• General knowledge of AC drives and electrical motors, pneumatic cylinders and roller/chain conveyors
• Knowledge of PLC, control circuits and electrical system
• Min. 3 years' relevant experience in heavy industry sector
• Experience in Bagging line would be an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65269 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: IT/Rental (Photocopier)
• Position Title: Copier Technician
• Working Location: Ubi Ave
• Working Hours: 5.25 days (Mon-Fri 8.30am–5.30pm, Alternate Sat 8.30am-12.30pm)
• Salary Package: Basic $3,000 + VB + OT Pay + Company Vehicle Provided
• Duration: Permanent

Key Responsibilities

• Install and set up photocopier machines and connectivity at customer locations.
• Diagnose and repair equipment both on-site and off-site.
• Investigate and resolve maintenance and repair issues.
• Manage tool kits, spare parts, and supplies responsibly.
• Conduct preventive maintenance and adjustments on photocopiers.
• Provide excellent support by responding to customer needs promptly.
• Submit meter readings on time.
• Train and advise customers on machine operation and basic maintenance.
• Interact professionally with all customers.
• Build good relationships with customers and colleagues.
• Perform any other duties assigned by supervisors.

APPLY NOW!!!

• GCE O-Level or higher.
• Has valid driving license to go on site for servicing.
• Experience in repairing/service of copier machines is preferred.
• Customer service skills.
• Basic PC and network knowledge is a plus.
• Training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70878 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Brief as an Electrician:

As an Electrical Technician, you will perform a range of electrical tasks, including wiring, troubleshooting, and equipment maintenance. Your role involves ensuring the safe and reliable operation of electrical systems and adhering to industry standards and regulations.

Responsibilities as an Electrician:

1. · Install, repair, and maintain electrical systems, equipment, and components, including wiring, fixtures, and appliances.
2. · Read and interpret electrical blueprints, diagrams, and technical specifications to determine wiring layouts and installation procedures.
3. · Test electrical systems and components for functionality, safety, and compliance with regulations.
4. · Troubleshoot electrical problems, identify root causes, and implement corrective actions.
5. · Perform routine inspections and preventive maintenance on electrical systems and equipment.
6. · Replace or repair faulty electrical components, such as switches, outlets, and circuit breakers.
7. · Ensure compliance with electrical codes, regulations, and safety standards in all work activities.
8. · Provide technical support and guidance to other maintenance staff or apprentices.
9. ·· Follow safety protocols and procedures to prevent accidents, injuries, and electrical hazards.
10. · Respond to emergency calls and service requests to address electrical issues promptly

Requirements & Qualifications as an Electrician:

• · High school diploma or equivalent education; completion of an apprenticeship program or technical training in electrical work.
• · Journeyman electrician license or equivalent certification preferred.
• · Proven experience as an electrical technician or electrician, with knowledge of electrical systems and equipment.
• · Familiarity with electrical codes, regulations, and safety standards.
• · Strong troubleshooting and problem-solving skills.
• · Ability to read and interpret electrical blueprints, diagrams, and technical manuals.
• · Proficiency in using electrical tools and equipment, such as multimeters, wire strippers, and conduit benders.
• · Physical stamina and manual dexterity to perform tasks requiring bending, kneeling, lifting, and climbing.
• · Attention to detail and accuracy in performing electrical work.
• · Customer service orientation and professionalism.

Required Skills as an Electrician:

• · Electrical troubleshooting
• · Technical skills
• · Attention to detail
• · Problem-solving abilities
• · Safety awareness
• · Communication skills
• · Physical stamina
• · Teamwork
• · Time management
• · Customer service

Job brief as an Electronic Tecnician:

We are looking for an electronic technician to set up, maintain and repair electronic systems and devices. You’ll test system performance, analyze and report on results.

This role requires hands-on experience using various hand and power tools to calibrate and align system components and circuitry. To succeed in this position, you should also be able to comprehend and follow complex technical manuals.

If you have good problem-solving skills, an eye for detail and good manual dexterity, we’d like to hear from you.

Responsibilities as an Electronic Technician:

1. · Set up electronic systems and devices
2. · Assemble and connect system components (e.g. cables)
3. · Build prototype models based on technical guidelines
4. · Monitor and report on project progress
5. · Estimate damage and calculate the cost of materials
6. · Test system functionality and analyze data
7. · Repair malfunctions in circuitry and other system structures
8. · Read and comprehend complex manuals and diagrams
9. · Update reports and maintain inventory
10. · Collaborate with engineers and other professionals on technical tasks

Requirements and Skills as an Electronic Technician:

• · Previous experience as electronic technician or similar role
• · Hands-on experience with electronic testing and circuitry
• · Familiarity working with various tools and equipment
• · MS Office and diagnostic software (e.g. PC-based)
• · Excellent physical condition and hand-eye coordination
• · An associate’s degree or apprenticeship as electronic technician
• · Certification in engineering or electronics is required

Our client is specialized in the production and distribution of disposable medical devices.

• Perform technical support for daily manufacturing operation.
• Ensure all equipment are well maintained.
• Assists in machine and equipment improvement and upgrade.

Requirements:

• Nitec in Engineering or equivalent
• At least 3 years of troubleshooting equipment failure and handling technical issues experience in cGMP manufacturing environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Be part of a leader of specialty materials.
• Be exposed to cutting-edge technologies and solutions.

About Our Client

The client is a company that specializes in providing advanced chemical solutions and services, catering primarily to industries like semiconductor manufacturing, specialty chemicals, and related high-tech fields. They likely focus on producing, testing, and improving chemical compounds and formulations used in precision-driven environments. Their emphasis on quality assurance, analytical metrology, and R&D reflects their commitment to technological innovation and customer satisfaction.

Job Description

Job Responsibilities:

• Collaborate with chemists to lead a team of lab analysts and technicians in executing daily laboratory operations.
• Ensure compliance with accreditation standards and implement quality systems to maintain operational excellence.
• Develop and validate analytical methods for testing chemical compounds, ensuring accuracy, precision, and reliability.
• Identify and drive initiatives to enhance laboratory efficiency and productivity.
• Oversee equipment calibration, troubleshooting, and maintenance planning to meet quality and operational standards.
• Ensure analytical tools are in proper working condition for accurate testing and analysis.
• Provide technical support in new product development processes, analytical metrology, and quality assurance.
• Work with other departments on continuous improvement projects to achieve business objectives and operational excellence.
• Conduct quality control tests, inspections, and analyses to ensure products meet standards and specifications.
• Investigate deviations, out-of-specification results, and quality issues, implementing corrective and preventive actions (CAPAs).
• Serve as a quality expert to ensure products meet customer requirements.

The Successful Applicant

Requirements

• Master's/Bachelor's Degree in Chemistry with relevant experience.
• Proficient in operating advanced laboratory instruments, such as: ICP/MS (Inductively
• Coupled Plasma Mass Spectrometry), GC/MS (Gas Chromatography-Mass Spectrometry), HPLC (High-Performance Liquid Chromatography), UV-Vis, GC/FID/TCD, IC, ICP/OES, NIR, and other analytical tools
• Experience in specialty chemicals or semiconductor wafer fab environments is an advantage.
• Hardworking, adaptable, and capable of multitasking in a dynamic environment.
• A team player with excellent interpersonal skills and a strong sense of ownership and accountability.
• Ability to work under pressure, prioritize tasks systematically, and make sound decisions in a fast-paced setting.
• Ability to travel as required for the role.

What's on Offer

Exciting opportunity to work in a dynamic and innovation-driven environment at the forefront of chemical solutions for high-tech industries like semiconductors and specialty chemicals. The client offers exposure to cutting-edge analytical instruments and methodologies, enabling candidates to enhance their technical expertise and leadership skills. With a strong emphasis on quality and continuous improvement, this position provides a platform for professional growth, collaboration across departments, and contribution to impactful R&D and product development initiatives. Additionally, candidates will benefit from working in a supportive team culture that values ownership, accountability, and excellence, along with opportunities for career advancement and industry recognition.

Contact

Timothy Huang (Lic No: R1980928/ EA no: 18S9099)

Quote job ref

JN-122024-6623130

Phone number

+65 6416 9863

Michael Page International Pte Ltd | Registration No. 199804751N

Our client is specialized in the production and distribution of disposable medical devices.

• Perform technical support for daily manufacturing operation.
• Ensure all equipment are well maintained.
• Assists in machine and equipment improvement and upgrade.

Requirements:

• Nitec in Engineering or equivalent
• At least 3 years of troubleshooting equipment failure and handling technical issues experience in cGMP manufacturing environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740