With thousands of hotels in over 100 countries and territories, Hilton offers countless opportunities to delight. From an open door to a welcoming smile and an exceptional experience, we offer the millions of travellers who stay with us every year a welcome they will never forget. In addition to our flagship brand, Hilton Hotels & Resorts, the family of brands includes Waldorf Astoria, LXR, Conrad, Canopy, Curio Collection, DoubleTree, Hilton Garden Inn, Hampton and many others.

If you appreciate the impact global travel can have on the world, you may be just the person we are looking for to work as a Hilton Team Member. Because it’s with Hilton where we never forget the reason we're here: to delight our guests, Team Members, and owners alike.

The Technician assists the Director of Engineering, Asst. Director of Engineering, Engineering Manager, Chief/Senior Maintenance Officer & Maintenance Officer with the day-to-day operations of Engineering, in line with Conrad standards, brand pillars and prescribed Hilton policies and procedures.

What will I be doing?

As the Engineering Technician, you will be responsible for performing the following tasks to the highest standards:

• Ensure all mechanical and electrical including all piping and fittings throughout the hotel are working satisfactory. Fabricate, repair and maintain mechanical and electrical system, structure and equipment inclusive sanitary, plumbing, waste and choke manhole etc.
• Repair and maintain all mechanical equipment, kitchen equipment, laundry equipment, heat recovery, fresh air supply and exhaust air fans, rubbish bin, trolleys, wheels, all mechanical fittings,etc.
• Install or repair meters, starters, switchgears, fitting, wiring, vacuum machines, cables and all electrical, gas and fuel operated machine throughout the hotel.
• Inspect and replaced all fused lamps inside and outside the hotel including grounds, gardens and swimming pool light.
• Report and maintain television sets, antenna, signal booster and amplifiers.
• Observe and report any equipment, switchgears or wiring which are not functioning properly and rectify them.
• Check and conduct weekly test run generator set and also battery water level, engine oil, indicator water etc.
• To maintain daily log sheets for reading of temperature and pressures of electrical, air-conditioning system, water supply and heat recovery system.
• Check and repair defective flushing system, toilet bowls, urinals, basins and ventilation pipes.
• Check and repair all valves for hot and cold water and chilled water system.
• Check all water pumps systems, heat recovery, flush tanks, water tank heater and swimming pool, inclusive of all valves for hot and cold water systems and chilled water systems.
• Do cement and tiling work for all walls, car parks, beams, pillars and post, floor tiles, vinyl tiles, long bath and basin grouting, pipe and service riser and staircases.
• Construct edges, kerbs and pelmets.
• Weld coppers, galvanized and steam pipes.
• Install and repair washbasins, long bath, toilet bowls and urinals.
• Check, repair and replace washers, gaskets for taps and valves.
• Carry out all work in connection to plumbing and masonry.
• Perform duties as per safety and fire operation drill when and there the need arise.
• Respond promptly and positively to all guest requests, even if it does not directly concerned the department or job.
• Carry out shift/split shift or when called upon to perform odd duties whenever a person of the same category/trade fall sick/on vacation/in-camp training or absent from duties or as called upon to do so from time to time as required or directed by supervisors.
• Coordinate and report to Maintenance Officers, on job assignment and inform them of movement to enable easy and quick locate in case of emergency.
• Assist in keeping workshop areas, plant room and other equipment rooms clean at all times.
• Any other job assignments as and when required by his superiors.
• Participate in the annual fire evacuation drill exercise / building inspection conducted by FSSB.
• Carry out any other reasonable duties and responsibilities as assigned.
• The Management reserves the right to make changes to this job description at its sole discretion and without advance notice.

What are we looking for?

An Engineering Technician serving Hilton Brands is always working on behalf of our Guests and working with other Team Members. To successfully fill this role, you should maintain the attitude, behaviours, skills, and values that follow:

• ITE or Diploma graduates or any other relevant license or experience.
• More than 3 years’ experience in related industry.
• Be able to consistently delight and satisfy our guest.
• Ability to read, write and speak in the English language.
• Work in a safe, prudent and organized manner.

What will it be like to work for Hilton?

Hilton is the leading global hospitality company, spanning the lodging sector from luxurious full-service hotels and resorts to extended-stay suites and mid-priced hotels. For nearly a century, Hilton has offered business and leisure travellers the finest in accommodations, service, amenities and value. Hilton is dedicated to continuing its tradition of providing exceptional guest experiences across its global brands. Our vision to fill the earth with the light and warmth of hospitality unites us as a team to create remarkable hospitality experiences around the world every day. And, our amazing Team Members are at the heart of it all!

Job Description

An exciting opportunity has arrived at The Garcha Group, Singapore’s boutique hotel group currently with the following hotels:

- Maxwell Reserve, Autograph Collection Hotel (Marriott);

- Duxton Reserve, Autograph Collection Hotel (Marriott);

- The Vagabond Club, a Tribute Portfolio Hotel (Marriott);

- The Serangoon Club, a Tribute Portfolio Hotel (Marriott).

Garcha Group Benefits:

- As an associate of a Marriott hotel, you, your parents or parents-in-laws, children, spouse/domestic partner and

siblings are eligible for discounts on F&B and room rates in 7,000+ hotels world-wide.

- As an associate of a Marriott hotel, you have access to the “Global Learning + Development” tool which creates for you personalized learning experiences designed to help you thrive in their Marriott career journey.

- 3 days 2 nights yearly staycation including all meals and beverage in any of the 4 Garcha Group hotels in

Singapore.

- 20% off Food & Beverage at all Marriott & Garcha Group restaurants and bars.

Job Description:

· Respond and attend to guest repair requests.

· Communicate with guests/customers to resolve maintenance issues.

· Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication.

· Visually inspect tools, equipment, or machines.

· Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings.

· Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.

· Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, energy conservation, and/or general building.

· Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough clean-up of the painting or repair area.

· Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items.

· Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work.

· Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers.

· Display basic computer skills including inputting air handler schedules and making temperature changes.

• Carrying out diagnostic for van and lorry
• Carrying out mechanical repair for van and lorry
• Carrying out electronic repair for van and lorry
• Carry out engine overhaul and chassis repair
• Able to repair air condition
• Conduct preventive maintenance for vehicle
• Ensure that all work order is carried out accordance to the schedule
• In Charge of Vehicle movement and parking

REQUIREMENT

• Min. 5-year relevant workshop experience dealing with commercial vehicle
• Familiar with light to medium size van & lorry and the servicing of major brand such as Toyota, Nissan, Mitsubishi, Isuzu and Hino
• Familiar with both Petrol and Diesel engine
• Possess positive learning attitude & a good team player
• Good interpersonal and communication skill
• Able to work night shift and split shift
• Able to work OT on public holiday and weekends.
• Must be able to work night shift or split shift
• Must be able to work extra hours or weekend if needed

• Troubleshoot and carry out minor repairs (electrical, plumbing, builder, etc) for the building and related facilities.
• Supervise sub-contractors who carry out approved repair works and scheduled maintenance in the building.
• Assist Facilities Executive & officer to execute preventive maintenance regime and/or ad-hoc upgrading project and monitor the work progress.
• Assist Facilities Executive & officer to attend to tenant’s feedback on the building and related facilities.
• Provide guidance and coaching to junior staff when required.

Responsibilities:

• Perform maintenance, repair or overhaul of Air compressor
• Lead the team of technicians and train in troubleshooting, diagnostics and best practices
• Submission of Service Reports timely manner.
• Communicate with Internal/Customers on job related issues, recommendations, unforeseen problems
• Identify potential risks to the team and/or the equipment or job.
• Ensure safety observances on site both for self and team and highlight safety risks to Manager.
• Upkeep of equipment and tools used as well as proper housekeeping of your work surroundings.

Requirements:

• ITE/Diploma in Engineering
• Experience in maintenance and repair of major Air Compressor brands
• Familiar with maintenance and repair of Air treatment equipment like Air Dryer and Filter.
• Knowledge of Vacuum pumps, blowers or other rotating equipment such as pumps is a plus.

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang
EA Personnel No: R21102570
EA License No: 23C1894

The Facilities Technician is responsible for daily engineering sections to support the hotel operations.

Primary Responsibilities

Daily Engineering Operations

• Operates the equipment to deliver a comfortable room temperature to hotel areas.
• Operates the equipment to deliver clean water to the respective services in the hotel.
• Operates the equipment to deliver hot water to the respective services in the hotel as required.
• Operates the equipment to deliver clear and sharp images from the television and satellites equipment to hotel guest suites as required.
• Operates the equipment to deliver audio visual support to the hotel event as required.
• Assists and supports the emergency operations team during an emergency and a crisis in a timely and efficient manner.

Shift Operations

• Rectifies equipment and facilities breakdown as required.
• Replaces faulty components / lighting bulbs as required.
• Responds to requests relating to technical issues from hotel patrons in a timely and efficient manner.
• Collects daily utilities meter readings and verify plant / equipment are in proper operations as required.
• Patrols hotel grounds to verify fire and safety risk as required.
• Patrols hotel grounds to verify all lightings on hotel grounds operate within the preset timings as required.

Plant and Facilities Services

• Operates plant facilities to support every aspect of hotel operations in a timely and efficient manner.

Preventive Maintenance

• Rectifies / Repairs damaged furniture to the highest quality level and in a timely manner.
• Rectifies / Paints defective building surfaces to the highest quality level and in a timely manner.

Other Responsibilites

• Operates the hotel elevators and dumbwaiters as required.
• Operates the hotel swimming pool and water fountains as required.
• Operates the hotel fire protection services as required.
• Operates the hotel drainage and sanitary system as required.
• Operates the hotel television and satellites system as required.
• Operates the hotel public music system as required.
• Operates the hotel lightings and dimming system as required.

Involvement In Wider Job Function Actions/Relationships

• Upholds Accor Values of Guest Passion, Sustainable Performance, Spirit of Conquest, Innovation, Trust and Respect, in the execution of all duties and responsibilities.
• Participates and supports sustainability in Corporate initiatives and programmes.
• Performs any other duties and responsibilities that may be assigned.

Candidate Profile

Knowledge and Experience

• Nitec Certificate in Building Facilities Maintenance, Electrical / Electronics, Air conditioning servicing and/or Plumbing.
• Minimum of 1 year of relevant experience.
• Good working knowledge of Microsoft Office.

Competencies

• Detailed Engineering knowledge.
• Planning ahead.
• Great communicator.
• Ability to communicate with all levels of colleagues.
• Service oriented professionalism.
• Ability to contribute in a team environment.
• Multicultural awareness to work with colleagues from diverse cultures.
• Responsive to change within the team.
• Sense of urgency and able to set priorities.

Benefits of Joining Raffles Hotel Singapore

• 5-day Work Week.
• Duty Meals are provided.
• Colleagues’ Discount and/or Preferential Room Rates at worldwide Accor Hotels.
• Flexible Benefit – Dental/Optical/Vacation Expenses/Children’s Education.
• Medical and Wellness Benefit.
• Comprehensive Insurance Coverage.
• Local/Overseas Career Development & Growth Opportunities.
• Holistic Learning and Development Opportunities.

About the Role:

• Assist the Building Manager in the daily operations
• Troubleshoot building services failures
• Ensure efficient and effective maintenance of Client's facilities through routine check and preventive maintenance strategies
• Preparation of monthly and incident report pertaining to the site(s)

About You:

• Diploma / Higher Nitec / Nitec in Facilities Management / Mechanical Engineering / Electrical Engineering / Building Services or equivalent.
• Min 3 years relevant Facilities Operation experience.
• Comfortable to work morning and night rotating shift.

We have a vision of the future, where people simply belong.

That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, gender, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status.

We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us.

JOB HIGHLIGHTS

• Attractive medical benefits
• Career development and growth
• 5 day work week
• 5 mins walk from Ubi MRT

Job Description:

• Responsible to troubleshoot and repair PCBAs from production output and customer returns
• Responsible for product quality inspections
• Prepare raw materials for production
• Validate all finished goods to ensure compliance with customer requirements before each delivery
• Other duties as and when assigned

Job Requirements:

• Minimum a NITEC or Diploma in Electronics/ Mechanical/ Manufacturing with at least 2 years of working experience in a manufacturing environment
• Hands-on experience in the production process, PCBA troubleshooting and repair

All resumes are treated with the strictest confidence. We regret that only shortlisted candidates will be notified.

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Laboratory Technician to be part of their Labortory Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Laboratory Technician:

• Assist in routine lab tasks such as paint preparation, panel setup, and airless spray applications.
• Conduct sampling, testing, and analysis for paint products.
• Support chemists in development projects, including managing stock levels for panels, raw materials, and lab supplies.
• Participate in trial applications and inspections outside the lab under supervision.
• Handle non-chemical waste disposal and maintain a safe work environment by following ISO, safety, and environmental standards.
• Communicate progress or delays effectively with the line manager.
• Ensure workplace safety, especially in handling chemicals, and follow preventive measures to reduce risks.

Requirements:

• Diploma in related field
• Entry level are welcome to apply. Training provided.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

The position is responsible for daily engineering sections to support the hotel operations.

Primary Responsibilities

Daily Engineering Operations

• To cut, fabricate and install wooden and other structures according to specifications.
• Reads blueprints, drawings and sketches to fully grasp requirement.
• Takes measurements and calculate the size and amount of material needed.
• Cut, shape and smooth lumber and other materials (e.g. fiberglass) according to measurements.
• Builds window frames, doors, staircases and frame buildings by using raw materials or pre-constructed items.
• Lays out floorings, roofing or drywalls ensuring they are leveled and compatible.
• Carves and assembles furniture, cabinets, shelves and other items and install them where designated.
• Builds scaffolding and other construction structures.
• Rectifies equipment and facilities breakdown as required.
• Responds to requests relating to carpentry issues from hotel patrons in a timely and efficient manner.
• Replaces faulty components / parts as required.

Preventive Maintenance

• Rectifies / Repairs damaged furniture to the highest quality level and in a timely manner.
• Rectifies / Repairs defective building surfaces to the highest quality level and in a timely manner.

Involvement In Wider Job Function Actions / Relationships

• Upholds Accor Values of Guest Passion, Sustainable Performance, Spirit of Conquest, Innovation, Trust and Respect, in the execution of all duties and responsibilities.
• Participates and supports sustainability in Corporate initiatives and programmes such as Planet 21 – Corporate Social Responsibility, Diversity and Inclusion, Women at Accor Generation, etc.
• Performs any other duties and responsibilities that may be assigned.

Candidate Profile

Knowledge and Experience

• Proven experience as carpenter
• Hands-on experience in working with carpentry materials
• Excellent understanding of carpentry techniques and methods of installation and construction
• Proficient in using electrical and manual equipment and measurement tools (powered saws, hammers, rulers etc.)
• Ability to read technical documents and drawings
• Willingness to follow safety guidelines at all times
• Good knowledge of English
• Good understanding of basic math
• Good physical condition and endurance
• Related or relevant carpentry training/certification preferred.

Competencies

• Detailed Engineering knowledge.
• Planning ahead.
• Great communicator.
• Ability to communicate with all levels of colleagues.
• Service oriented professionalism.
• Ability to contribute in a team environment.
• Multicultural awareness to work with colleagues from diverse cultures.
• Responsive to change within the team.
• Sense of urgency and able to set priorities.

Benefits of Joining Raffles Hotel Singapore

• 5-day Work Week.
• Duty Meals are provided.
• Colleagues’ Discount and/or Preferential Room Rates at worldwide Accor Hotels.
• Flexible Benefit – Dental/Optical/Vacation Expenses/Children’s Education.
• Medical and Wellness Benefit.
• Comprehensive Insurance Coverage.
• Local/Overseas Career Development & Growth Opportunities.
• Holistic Learning and Development Opportunities.

Reporting to the Engineering Manager, you are responsible for supporting and executing the setup of the Packaging operations. This involves working closely together with the Capital Project team to ensure Safety, Quality, Compliance and Operational aspects of the packaging lines are adequately included during the design and construction phase. Post construction and qualification, as the team prepares for commercial supply, you will support the engineering and maintenance activities to ensure they meet GMP, regulatory and supply requirements.

In this role, you will:

• Participate actively as part of the Site start-up team in equipment FATs and site qualification activities (IQ, OQ and PPQ) for Syringe and Vial Packaging lines.
• Shape data-driven decisions that solve business challenges and deliver on desired outcomes and people experience.
• Drive innovation, every plant area is a model area using MPS.
• Build future-ready manufacturing facility and position Singapore as strategic site for new products and innovation solutions in the Global Network.

Key Responsibilities:

Safety & compliance

• Uphold and comply with safety standards and never compromise on patient, team and personal safety.
• Participate in Safety, Health, and Environment (SHE) improvement initiatives.
• Implement corrective and preventive actions as recommended from investigations, regulatory inspections and internal audits.
• Understand and ensure Safety and cGMP requirements are met. Ensure equipment related activity is completed according to established procedures and all associated documentation is completed to a high standard.
• Participate in Emergency Response Team (ERT) as a team member when assigned.

Enhance and uphold Maintenance quality

• Execute maintenance and improvement activities within the IPT, ensure preventative maintenance is completed according to schedule requirements, and support equipment change control implementations.
• Reduce equipment downtime and enhance equipment performance through quality preventive maintenance works.
• Executes CMMS Work Instruction from Packaging line (e.g. Isolation and Reconnection of electrical supply, replace faulty part, troubleshoot, repair E/I and mechanical faults).

Operations excellence

• Support and meet performance metrics of the assigned operations.
• Proactively assess and carry out preventive maintenance and corrective repair works on packaging, robotic and conveying system.
• Contribute to maintain a high level of good housekeeping and carrying out operations within accepted GMP and HSE practices.
• Resolve issues in a timely manner and minimize equipment down time.
• Participate in Continuous improvement initiatives. Identify and report improvement for routine work activities.
• Highly effective worker; resourceful with a “get-it-done, can-do” attitude.

Problem solving

• Analyze and recommend solutions for identified issues.
• Support Production and Maintenance teams on problem solving and troubleshooting.
• Able to properly assess the situation and understand when to escalate to a higher level.
• Work together with the Engineering team to use 5S tool to maintain the working environment and perform Kaizen for improvement activities.

What are we looking for?

Qualifications & Experience

• Nitec/ Diploma in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering.
• 3-5 years of maintenance experience in the chemical or semiconductor industry.
• Experience or knowledge of PLC’s/HMI’s, electrical protective devices will be an added advantage.
• Good oral/written communication and interpersonal skills.
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Basic knowledge in using Microsoft Office, including MS Word, MS Excel, MS PowerPoint

Professional Competencies

• Resilient and resourceful
• Continuous learning mindset
• Foster teamwork and cross collaboration
• Strong work ethics
• Result driven mindset

Job Requirements

• Physically fit as the job requires employee to stand, walk, crouch, lift, twist, climb and reach.
• In addition, employee may be required to stand for a period of time, climb flights of stairs, and wear hearing protection equipment as required by the job.
• May be required to be on standby for any emergency repair after office hours, weekends and public holidays.

This is a career conversion programme under Workforce Singapore (WSG) and candidates must meet the following criteria and are open to the following conditions:

• Singaporeans/Singapore PRs only.
• PMETs/Mid-Careerist with minimum 2 years working experience.
• Open to two years contract.

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Manufacturing; well-structured career path.
• A state-of-the-art facility that delivers solution to its customers world-wide.
• Highly engaging team that aims to innovate the future.

Permanent Night Shift (11pm-7am)

Our client

MNC facility management /M&E engineering company in building and industrial market

Job scope

· To troubleshoot, repair , maintain mechanical/electrical services, plumbing & sanitary services, aircon servicing and maintenance, ACMV systems, chillers, and electrical control system.

Requirements

· Nitec in Mechanical/Electrical or Facilities Management or its equivalent

· Hands on experience in Building Facility Maintenance services n aircon n chillers

· Training will be provided for fresh graduate

Job Responsibilities

• Home Automation / Systems Integration projects for Hotels and Condos.
• Ensure consistency in execution of project activities.
• Testing and commissioning of project system.
• Identify and resolve project issues.
• Ensure on time submission of work done, certificate duly signed by client representative for monthly progress claims submission.
• Ad-hoc duties assigned.

Job Requirements

• Nitec & above
• Training provided - Welcome entry level
• Mandarin speaking - to work with Chinese Associates
• Office location at Ang Mo Kio
• Able to travel to project sites at Town area
• 5 days work (Monday to Friday , 9am to 6pm)
• Salary up to $2400 - $3200

Interested applicants pls submit your MS word resume. Shortlisted candidates will be contacted soon. Thank you.

Responsibilities:

• Conduct regular inspection repairs and preventive maintenance on equipment, breakdown.
• Identify electrical and mechanical faults. Perform tests and resolve the technical issues
• Order and replace parts, liaise with suppliers to ensure proper procurement.
• Maintain clean work environment and ensure contractors follow safety rules.
• Assist in preventive mainteance and breadk of faciloties
• Assist in administrative duties such as incident report and facilities records.

Requirements:

• ITE/Diploma in Electrical/Mechatronic Engineering
• Min 3 years of relevant experience
• Knowledge in electrical system and components
• Ability to work Overtime when necessary

Interested applicants, send in your updated resume by clicking “Apply Now”.

Lin Weikang
EA Personnel No: R21102570
EA License No: 23C1894

Company’s Profile
Founded in 2008, Global TechSolutions (GTSS) is a trusted name in semiconductor equipment manufacturing, with over a decade of experience serving front-end semiconductor wafer manufacturers. Our team, backed by strong OEM expertise, excels in repairs, refurbishment, installations, and field service support.

Benefits:

• Guaranteed AWS

• Performance bonus

• Increment after probation (subject to performance)

• 1 year cash completion bonus

Salary Package:
- Basic Salary: $2200
- Shift Allowance

- Fixed monthly attendance allowance

- OT pay eligible

Working Location: Kranji

Working Hours: 12 hours shift work, (4 days work, 3 days off | 3 days work 4 days off)

Key Responsibilities:

• Perform robot PM: parts cleaning & greasing, replacement of sensors, motors, motor drivers etc.

• Installation of vacuum valves, fore line pipes, heater jackets.

• Support tool owner engineer to do technical activities in fab: trouble shoot, modification, installation, de-installation.

• Support 6S & logistic activities (parts cleaning, arrangement, label-ling, housekeeping.

Requirements:

• Min. NITEC in any Engineering field or equivalent certification

• Willing to do hands-on work and comfortable to be in clean room suit

• Able to work on weekends

*Able to start work within short notice will be highly advantageous.*

**Please be notified that only shortlisted candidates will be notified**

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: TOH SHIQI

EA Personnel No: R23119083

EA License No: 21C0845

The Water Heater and/Ceiling Fan Technician is responsible for installing, repairing, and maintaining ceiling fans and water heaters in residential and commercial settings. This role involves a combination of technical skills, customer service, and attention to detail.

Responsibilities

• Install and repair ceiling fans and/or water heaters.
• Provide excellent customer service
• Explain work details to clients.
• Ensure safety compliance and adherence to regulations.
• Maintain accurate records of installations and repairs.
• Stay updated on product knowledge and industry advancements.
• Manage work schedules and respond to emergency calls efficiently.
• Conduct quality checks on completed installations.

Requirements

• Valid Singapore Class 3 driving license.
• Technical proficiency in electrical work.
• Relevant certifications and licenses.
• Strong troubleshooting and problem-solving skills.
• Excellent customer service and communication skills.
• Physical stamina for lifting and climbing.
• Commitment to safety protocols.
• Attention to detail in installations and repairs.
• Efficient time management and organizational skills.
• Able to attend relevant company-sponsored compliance training whenever necessary

Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

Global and local businesses have established goals to attain net zero carbon emissions by 2040/ 2050, with a strong emphasis on Green Mark Certification, WELLS, and LEED. Savills will play a significant role to work with Companies to shape their future.

We are looking for a proactive Technician / Senior Technician who will become a member of our team that promotes sustainability to our clients by suggesting numerous creative methods and implementations to reduce their properties' carbon footprint. The role will report to Samuel Han, who will lead the Energy & Sustainability business in Singapore, and be part of a vibrant team to drive an impact through excellent service, solutions and results.

Join our team and shape the future with us.

Roles & Responsibilities

• Assist in installing instruments and equipment for energy audits and gather the relevant data and documentation for the energy audit report
• Conduct walk-through audit, measurement, and verification of building performance in order to analyze and recommend improvements
• Project managing on retrofit/ implementation projects
• Develop engineering solutions that provide the greatest value to our customers
• Manage contractors, subcontractors & suppliers
• Testing and commission of implemented systems
• Maintain a high-level of customer satisfaction
• Assist members of the Energy & Sustainability Management team in other works assigned, as applicable

Requirements

A successful candidate for this position must be able to fulfill each required responsibility properly. This position requires a good background in engineering, energy, and/or sustainability, as well as a strong interest and motivation in the disciplines of Energy and Sustainability. Success requires the ability to learn new topics and adapt to different environments.

• Pursuing education in a related technical subject (e.g. Engineering, Sustainability, Energy, Environmental Science)
• Experience in installing Energy Audit equipment & instruments
• Good communication abilities, including report writing and visual and verbal presentation approaches
• Interest in energy & sustainability
• Handling ACMV knowledge/ experience is preferred
• Ability to read and comprehend technical reports and drawings
• Flexible, analytical and efficient in problem-solving
• Excellent planning and organizing skills
• Able to work well in a team yet can be independent and accountable

Buildings now have multiple waste management and recycling equipment that are expected to operate 24 hours a day with minimal downtime. We are looking for technicians that will be stationed on-site to conduct the following:

Key Responsibilities

1. Maintenance and Repair of on-site food waste treatment system(s).

- Requires basic mechanical and electrical engineering knowledge

- Willingness to handle the odour from food waste - don't worry, we all get used to the smell after awhile

- Personnel required to clear chokages, if any.

2. Engage in operations of on-site food waste treatment system(s).

- For premises that have the tenants bringing the food waste directly to the system and feeding it in themselves, our on-site personnel just need to make sure tenants are using the system properly and that majority of what they provide is food waste

- For premises where the tenants only bring the food waste to the bin centre and leave it there, our on-site personnel must conduct the transfer of the food waste via automatic lifters to the food waste treatment system.

- For premises where we need to bring the food waste from the tenant outlets to the bin centre together with our cleaning partners, our on-site personnel must assist in the whole process (ie push a big bin to the tenants, they will empty their food waste into the bin, and then push the bin back to the bin centre)

3. Managing all other equipment in bin centre

- For projects where our company has to handle other equipment in the bin centre, personnel has to oversee proper usage of all equipment

- Personnel to conduct area cleaning of bin centre to ensure all recyclables are stored neatly

Key Skills

1. Technical skills - NITEC level know how in mechanical, electronics, and/or electrical engineering is a must

2. People and communication skills - you will be site client's first point of contact with us

Other details

- Direct report to site(s) at North East Area

- 5.5 days week

Hiring: air conditioner technician assistant

Must have 3-5 years of experience in air conditioning maintenance

Salary composition:

• Basic Salary: 3000-5000 SGD + OT including allowances
• Good progression and chance for promotion, higher basic salary and S Pass.
• Monday to Saturday 9am-6pm
• Good work culture
• Friendly boss and co-worker
• Fast growing company with great potential!

Job Scope:

• Servicing of air conditioner units
• Topping up coolant / gas for compressors
• Fixing of leaking air conditioner units
• Fixing of air conditioner units that are not cold
• Installation of new air conditioner units / replacement aircon units
• Qualify leads and set meetings by qualifying key decision-makers to penetrate accounts and develop new prospects.
• Lead and accurately record contact information in the company CRM

Must have:

- 3-5 years of experience in air conditioning maintenance

- Self motivated

Kindly whatsapp Jay at 88341414 / wa.me/88341414

• Handle daily operational tasks and participate in plant troubleshooting
• Perform field logging, routine sampling and plant testing work
• Prepare process equipment for mechanical work according to SOP procedures
• Carry out loading/unloading and raw material charging activities
• Operates utility and process plant

Requirements:

• NTC 2/Diploma holder in Chemical Process Technology
• 1-2 years’ experience in chemical industry preferred
• High awareness of job safety and housekeeping

Bayes provides career opportunities with reputable and progressive Employers and prioritizes the interests of all whom we represent. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

All personal data supplied will be treated in confidence, and as permitted by law. For further enquiries, please visit our website which shares our Privacy and Data Protection Policy.

Dickson KOH | Managing Partner
Head, Infrastructures Practice
EA Registration R1103367

• Conduct regular fuel farm operations and maintenance tasks following SOPs and safety guidelines.
• Preparation the daily logs and supervise the troubleshooting processes carried out by contractors, and reports all equipment abnormalities to the maintenance teams.

Requirements:

• NITEC and above
• At least 2 years of experience in Aviation industry.
• Possess valid class 4/5 and forklift license
• Proficient in utilizing applications with a strong awareness of cybersecurity.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Manufacturing Technician

(1 year contract)

About the Company:

Our client is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. They design, build and service manufacturing equipment for the semiconductor and display industries.

Primary Responsibilities:

In this role, you will be responsible for all or subset of the key responsibilities below:

• Utilizes routine work orders, schematics, wiring diagrams, parts, and wire lists, written and/or verbal instructions to build, repair and/or test electrical, electro-mechanical, vacuum, pneumatic assemblies, subassemblies, and components.
• Performs electro-mechanical assembly operations, troubleshooting and repair. Identifies and corrects errors.
• Observes all safety standards. Maintains a secure, safe, clean, and healthy work environment. Attends required health and safety training and follows safety and security policies, procedures, and practices. Promptly reports accidents, injuries, safety hazards, or emergencies to supervisor or Safety dept. Follows operating instructions, uses protective equipment when required, and uses equipment and materials properly. Actively strives to prevent accidents and injuries.
• Utilizes test fixtures, electronic measurement equipment, leak detectors, and/or vacuum pumps to test assemblies, subassemblies, and components. Enters data on computer terminal, such as progress, work expense and labor details. May perform computer programming, repair, or software installs
• Details finished work. Receives parts and performs audits to ensure all necessary parts are available to perform built, test and repair. Inspects parts for defects. Troubleshoots and improves processes and involved in test.

Requirements:

• Minimum ITE certifications or Diploma in related engineering education background
• At least 1 year of experience in manufacturing technician role within semiconductor industry
• Familiar with DDP and MDP tools in semiconductor industry

Reg No: R22104540

EA License no: 94C3609

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• At least 2 years of experience with Advantest 93000/Teradyne J750.
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

You will assist pharmacists in ensuring the availability of medications and facilitate patient care through processing of medication orders which includes typing, packing and counselling. You will also be required to prepare extemporaneous syrups and to provide customer service and handle simple enquiries on Over-The-Counter medications and other available retail products.

In addition, you will be required to perform administrative duties e.g. pre-packing, cycle counts and topping up of stocks. You may also be given supervisory duties such as roster planning etc.

Requirements

• Diploma in Pharmaceutical Science from local Polytechnic, WSQ Advanced Certificate in Pharmacy Support or equivalent
• Work experience in retail/hospital/clinic will be an advantage
• Able to work on weekends and public holidays (PHs)

Responsibilities:

• Site execution of pre-commissioning, commissioning and function testing of LV Switchgears, UPS systems, transformers, VFDs, distribution panels, generators, lighting circuits, etc.
• Carry out isolations / de-isolations on electrical equipment up to and including 690V as an Authorized Electrical Person (AEP) as approved by Responsible Electrical Person (REP).
• Attend daily Tool Box Talks to ensure full understanding of work scope as per PTW requirements.
• Carry out commissioning testing activities safely to comply with site PTW/LOTO and safety regulations and procedures.
• Assist vendors in carrying out pre-commissioning and commissioning scope of work related to vendor packages.
• Carry out troubleshooting of faults arising during commissioning tests.
• Filling up checksheets, test records and prepare red-line mark-up drawings, etc. during commissioning tests.
• Maintain latest drawings / documentation on site including all red-line markup drawings.
• Planning and undertaking scheduled maintenance.
• Responding to breakdowns
• Diagnosing faults
• Supervising engineering and technical staff.

Requirements:

• Diploma in Electrical Qualification.
• At least 7 years working experience in electrical equipment commissioning / operation & maintenance.
• Experience in testing and fault-finding troubleshooting of HV/LV transformers, UPS, batteries, motors, LV switchboards, VT, CT, motor starters, control panel, power distribution panels, lighting system, socket outlets, heat tracing, Nav Aids etc.
• Effective team player and ability to communicate in English.
• Familiar with Permit –To-Work system.
• Familiar with ATEX and Hazardous Area Equipment.
• Understanding and application of Electrical Safe Working Practices on Live equipment.
• Class 3 driving licence in advantage
• Abel to work rotating shift.