Job responsibilities:

• Assist the WSH Manager to identify and assess risks arising from the workplace.

• Conduct site safety inspection and enforce compliance on prevailing MOM Safety Acts and Regulations.

• Assist to conduct Safety Committee meetings, organize and promote safety events and campaign, etc.

• Conduct daily toolbox meetings to highlight safety issues.

• Supervise and attend to all issues related to workplace safety, health and environmental control.

• Ensure all documentation / permits / licenses related to work place safety, health and environmental control required by authorities and management are kept in order.

• Assist in conducting periodic WSH cross inspection for all sites to ensure compliance with government safety regulations and industry standards.

• Assist in conducting safety training / briefing such as familiarization on Risk Management’s standardize procedures to the respective site team to ensure safety awareness that the operations are safe and in compliance with statutory regulations and international standards / practices.

• Identify unsafe acts or practice and promptly correct any unsafe condition or practice.

• Any other duties that may be assigned.

Requirements:

• Advance certificate in Workplace Safety & Health/NITEC in Engineering (Environment, Health, Safety) or relevant field.

• Minimum 2 years of relevant working experience

• Familiar with regulatory requirements related to workplace safety and health, and all other aspects of safety

• Possess a high level of the initiative, strong interpersonal and communication skills.

Job Scope:

• Prepare project models and construction documents using BIM software.
• Establish project workflows throughout all project phases.
• BIM project set-up and continued project administration.
• Prepares 2D and 3D shopdrawings and as-built drawings.
• Liaise with Project Document Controller for accurate data transfer.
• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

Requirements:

• Must possess at least Degree/ Diploma in Electrical/ Mechanical/ Civil/ Architectural Engineering with relevant working experience in Construction industry or BIM certificate
• Minimum 2 years working experience in BIM.
• Proficient in BIM, Revit MEP, Bentley,AutoCad and MS Office.
• Able to read and interpret drawings.
• Must be able to work under pressure in fast-paced community with minimum supervision, meeting project deadlines.

Mon to Fri: 8:30am to 6pm

Position Summary

This position is responsible for guiding a team of logistic coordinators associates in the provision of logistics operational functions such as customer service, trucking coordination and the generation and maintenance of operations documents, reports, correspondence and expenses. Assist the Supervisor operations in the daily office activities and communications to customers.

Responsibilities

Primary Responsibilities

• Guide a team of coordinators associates to provide administrative support to the Operations.

• Handle order processing, prepare and maintain reports and files for all operations records, correspondence, plans, and expenses.

• Assist in the coordination and preparation of all necessary documentation for the movement of cargo.

• Perform tracking and tracing functions, and assist in the daily warehouse and administrative activities and communications

• Liaise closely with external parties to ensure shipments are expedited smoothly.

• Correspondence and liaison with customers and to attend to their enquiries.

• Handle any other ad-hoc / administrative duties.

Qualification Summary

Experience:

• This position requires minimum 3 years of relevant experience in Logistics industry.

• Must have prior experience in managing a team

Education:

• Minimum 'O' levels or Diploma in Logistics or Business Administration.

Skills:

• Good working knowledge of the following logistics operations areas – distribution, manufacturing, inventory planning, materials management.

• Good Interpersonal skills

• Good Communication skills

• Good Knowledge in Warehouse Management System (WMS)

• Good customer relationship management skills

• Proficient in MS Word, Excel, Outlook etc..

​Our client is a global leader in gateway services, who is seeking to recruit a Cargo Coordinator. This position is based in Singapore.

Cargo Coordinator

Responsibilities

· Handle and check cargo shipments and documentation.

· Engage airlines and attend to their needs.

· Liaise with third parties like agents.

· Manage a team of cargo handlers.

Requirements

· Nitec or diploma holders.

· Preferably with relevant experience in warehousing and logistics.

· Able to work on rotating shift (6 day work week, rotating shift (can be am, pm or night)

· Location : East

JJ Consulting Services

EA Licence No.: 12C6207

Applicants are invited to send in a MS Word resume to [email protected] stating position applying for/present/expected salaries and earliest available date.

We thank all applicants in advance and regret that only short listed candidates will be notified.

Roles & Responsibilities:

• Perform cross checking between architectural drawings & construction drawings for discrepencies and highlight to Project Manager
• Liaise with subcontractors on their works in accordance to design specification and regulations
• Attend progress meeting to assist Project Manager in technical and drawing issues
• Monitor and supervise architectural submissions to ensure smooth and timely delivery according to site progress
• Coordinate with site team and consultants to resolve design discrepencies and issues
• Attend site inspection to ensure works conform to drawing specifications
• Perform all other ad hoc duties as assigned

Requirements:

• Degree in Architecture with minimum 3 years’ relevant experience with a main construction firm.
• Strong ability in interpretation of construction drawings
• Meticulous and highly motivated, good interpersonal skills

We are looking for a candidate to independently administrate the transport operation of our company's various projects.

The role is multi faceted, and has deep involvement in customer service, transport co-ordination, planning and deployment of routes. Having an eye for transport co-ordination and safety procedures as well as being careful and meticulous is an important attribute of this position.

The ability to multi-task, communicate and manage drivers is critical for the success in this role.

The candidate is required to:

1. Receive route orders and plan on-boarding procedures for passengers;

2. Co-ordinate with customers and other stakeholders on their queries in process of onboarding;

3. Ensuring that routes are running effectively and efficiently;

4. Plan, route and co-ordinate with suitable drivers on their routes;

5. Assist in training and ensuring that service quality is upheld;

6. Deal with feedback, queries and complaints positively and effectively;

7. Other duties as required to fullfil the requirement of the position.

To succeed in this role, the candidate must have the following attributes:

1. Strong spoken and written communication skills, is patient and able and comfortable in communicating with people at all levels and from all walks of life;

2. Meticulous, able to multi-task and is focused in cordinating the tasks on hand to ensure deliverables are met to customers' satisfaction;

3. Enjoys multi-faceted co-ordination and is a strong team player;

4. Able to adopt IT processes, is adept in the use of technology and will train crew and drivers in the use of technology to facilitate the workflow;

5. Good sense of road direction;

6. Able to adapt and work independently as well as in a team and can function competently under pressure;

7. A willing and cheerful learner, worker and leader.

Responsibilities:

• Maintaining and monitoring project plans, project schedules, work hours, budgets, and expenditures.
• Organizing, attending, and participating in stakeholder meetings.
• Documentation and following up on important actions and decisions from meetings.
• Preparation of necessary presentation materials for meetings.
• Ensuring project deadlines are met.
• Determining and assisting in project changes.
• Providing administrative support when required.
• Undertaking project tasks as required.
• Assist in the development of project strategies alongside the management.
• Ensuring projects adhere to necessary frameworks and all documentation is maintained appropriately for each project as required.
• Assessment of project risks and issues and providing solutions wherever applicable.
• Ensure stakeholder views are managed and aligned towards the best solution.
• Facilitate meetings where appropriate and distribute minutes to all project team members.
• Adhere to project management calendar for fulfilling each goal and objective.

Requirements:

• Working hours & days : 5.5 days work week.
• Working location - CBD Area.

• Handle general office duties such as receiving all incoming phone enquiries, filing etc.
• Provide support to sales team in handling sales enquiries, preparation of sales quotation and follow-up.
• Maintain existing client's relationship and handle sales enquries as required.
• Coordinate closely with sales team and production team to meet customer’s requirements.
• Coordinate with customers and internal departments for job tasking and deliveries.
• Provide administrative and coordination support to sales team on day to day activities.
• Candidate must possess at least “N" Level or ITE
• Preferred bilingual in English
• Hardworking, polite, honest and punctual
• Prefer to have some mechanical background
• Relevant trainings will be provided

About the Role

As Project Coordinator, you will support our project managers and engineers with project coordination and administration; not limited to planning, initiation, execution, monitoring, controlling and closing; ensuring our projects are delivered within budget, timeline, scope and quality.

Job Responsibilities

• Support operations team members (such as project managers, project engineers, service technicians) with project coordination & other assigned tasks.
• Develop, maintain and monitor project plans and project schedules.
• Develop templates/ checklists for use with new acquisitions and ongoing project integration.
• Document and follow up on actions and decisions from stakeholder meetings.
• Ensure projects adhere to frameworks and all documentation is maintained appropriately for each project.
• Research, compile, process and coordinate project data e.g. data entry, report generation, metrics collection.
• Analyze risks and opportunities, manage project costs.
• Act as the point of contact and communicate project status to all participants.
• Receive customer requests/inquiries via mail or phone in a timely and accurate manner.
• Provide price and cost proposals in response to customers’ requests.
• Coordinate with procurement in purchasing items necessary for the projects/service repair.
• Forward invoices and work reports to customers.
• Provide outstanding customer service to improve customer satisfaction and relationships.
• Demonstrate elevated levels of disciplined, professionalism, ethics, and accuracy in delivery of works under limited timeframe pressures.

Who You Are

• You have proven project coordination experience (ideally 1-2 years) in the electronic security industry/ other similar technical environments.
• You possess a background in hardware/ electronic/ systems engineering or will enjoy the technical nature of integrated security solutions/ systems such access control & CCTV systems.
• You have strong interpersonal skills and the ability to communicate across diverse audiences.
• You are a go getter, problem solver with exceptional analytical skills.
• You possess strong organisational skills in dealing with multiple issues & various deliverables.
• You have sound commercial knowledge around financial analysis, cost management & project profit margins.
• You have excellent Microsoft Outlook, Project, Excel, Word and Power Point skills; solid programming skills and proven ability to troubleshoot problems and look for solutions.
• You are resilient, possess a growth mindset & will take on the challenge to deliver results with a keen eye for details.

Job Description

• Develop, update, prepare 3D model and shop drawings for submission to the clients and construction using BIM software.
• Ensure models and/or drawings produced to comply with applicable design codes/standards and specifications.
• Design and detailing of systems.
• Attendance for design and construction reviews.
• Provide onsite support for all matters relating to the BIM models with actual construction progress.
• Develop mechanical/ electrical/ ICA systems and designs, coordinate building services layouts,and manage drawing registers and standards

Requirements

• Preferably with a minimum of 3 years relevant working experience in related field.
• Proficient in Bentley OpenBuildings Designer/OpenPlant Modeller/OpenPlant P&ID will be an advantage.
• Able to work independently with minimum supervision.
• Able to perform tasks accurately and reliably with excellent attention to detail.
• Degree/Diploma holder in Mechanical/ Chemical/ Civil/ Architecture/ Electrical/ Electronics/ Instrumentation Engineering.
• Able to communicate in English and Mandarin

Job Description:

1. Liaise/Coordinate with Supplier/Factory/Customer on delivery status

2. Issue sales and purchase order

3. Issue Invoices, Debit/Credit Notes to vendor and customers

4. Preparation of shipping instructions for overseas shipment

5. RFQ for new model/new projects

6. Issue delivery notes, packing lists, and stock checks

7. Updating of PO record and monthly sales accounts

8. Other duties assigned.

Requirements :

• Diploma Holder
• Though not necessary, some experience using SAP software and sales coordination experiences in electronics manufacturing industry may be advantageous
• Proficient in Microsoft Office Excel

An ACMV (Air Conditioning & Mechanical Ventilation) Installation Site Coordinator plays a crucial role in overseeing and coordinating the installation of ACMV. Their duties and responsibilities are focus on ensuring the project is completed efficiently, safely, and within budget. Detailed breakdown of their responsibilities shall be as below and but not limited to:

1. Project Planning & Scheduling

• Work Scheduling: Coordinate and schedule all activities related to the installation of ACMV systems, ensuring that work is carried out according to the project timeline.
• Resource Allocation: Ensure that manpower, materials, and equipment are available as per project needs and schedules.
• Coordination with Contractors: Collaborate with subcontractors, suppliers, and other vendors involved in the installation process to ensure timely delivery and work execution.

2. Site Supervision

• Site Setup: Oversee the setup of the installation site, ensuring that all necessary equipment and materials are in place.
• Installation Supervision: Monitor the installation of ACMV systems such as ducting, piping, chillers, AHUs (Air Handling Units), FCUs (Fan Coil Units), BMS system, ESCS system, Jet Fan system and other components.
• Safety Compliance: Ensure that the installation is carried out according to safety regulations and that all team members are adhering to safety protocols (e.g., wearing PPE, following safety guidelines).
• Quality Control: Supervise the installation process to ensure that the work is completed to the required quality standards and complies with the project specifications and drawings.

3. Technical Support & Problem Solving

• Troubleshooting: Identify and resolve technical /site issues, constraint that arise during installation, working closely with engineers and technicians to provide solutions.
• Technical Assistance: Provide on-site technical support to ensure the correct assembly and installation of ACMV systems as per the design specifications.
• Adjustment & Modification: Recommend and implement necessary adjustments or modifications during the installation process to address unforeseen issues or improve efficiency.

4. Liaison with Stakeholders

• Client Interaction: Act as the main point of contact between the client and the project team, ensuring that the client's requirements and expectations are met.
• Coordination with Engineers: Work closely with Supervisor, Engineers, Designers, BIM team and Project Manager to ensure the installation meets design specifications and standards.
• Reporting: Provide regular progress updates and reports to Project Managers, Site engineers, and other relevant stakeholders.

5. Documentation and Reporting

• Project Documentation: Maintain accurate records of installation activities, including daily site reports, inspection reports, and material usage logs.
• Variation Management: Track and document any changes or variations to the project scope and ensure they are communicated to the relevant stakeholders.
• Site Meetings: Attend regular site meetings to review progress, discuss challenges, and plan the next phase of work.

6. Inspection & Testing

• Inspection of Installation: Ensure all installed systems and equipment are properly inspected for compliance with design and installation standards.
• Pre-commissioning Tests: Coordinate pre-commissioning tests, including leak testing of ductwork and piping, to verify the systems' integrity and performance. ACMV RI and TOP items inspection preparation and check before RI and TOP inspections.
• Final Commissioning: Assist in the commissioning of ACMV systems, ensuring that all testing, balancing, and adjustments are completed before handing over to the client.

7. Health, Safety, and Environmental Compliance

• Safety Training: Conduct safety briefings and ensure all workers are trained in safety practices specific to ACMV installation.
• Environmental Compliance: Ensure that installation practices are environmentally friendly, reducing wastage, managing emissions, and recycling materials where possible.
• Risk Assessment: Conduct risk assessments to identify and mitigate potential hazards on-site.
• Site Attendance: To attend everyday morning exercise and tool box meeting as per main con scheduled timing, conduct site walk to check and monitor site progress and arrange subcon workers and direct workers for necessary work to carry out.
• Permit Application: Apply Permit to Work (PTW) and other necessary permit such as Work at height, hot work, confined space, etc via main con NOVADE application platform.

8. Coordination of Multiple Trades

• Interfacing with Other Trades: Coordinate with other trade contractors (electrical, plumbing, civil) to ensure smooth progress and avoid conflicts between work activities.
• Sequencing Work: Ensure that ACMV installation is sequenced properly in relation to other trades and that all work is integrated effectively within the overall project.

9. Cost Control

• Material Management: Monitor material usage and inventory to avoid wastage and overstocking.

10. Post-Installation Support

• System Handover: Participate in the handover process, ensuring all necessary documentation and manuals are provided to the client.
• Defect Rectification: Oversee the rectification of any defects found after installation, ensuring they are addressed in a timely manner.

11. Training and Mentoring

• Team Training: Ensure the installation team is well-trained in the latest ACMV technologies, tools, and safety procedures.
• Mentorship: Provide guidance to junior staff and technicians on technical aspects and best practices of installation.

In summary, the ACMV Installation Site Coordinator is responsible for overseeing the complete installation process, from planning to execution and final handover, ensuring that everything runs smoothly, safely, and according to specifications. They serve as a central point of coordination between the project management team, contractors, engineers, and clients.

Requirements:

- Diploma or above in mechanical engineering or related qualifications

- Min 2 years on site experience

- Experience in BIM is an added advantage

- Strong independence and good communication in English

- Able to work 5.5 days week

.To assist WSH Officer in managing Workplace Safety & Health issues in Construction environment

· Monitor and report all work or operation that violate safety procedures, instructions, or would endanger life and property

· Prepare daily/weekly workplace safe/unsafe observation report

· Accident and incident investigation

· Report all incident and accident as per site/project and company’s emergency reporting protocol

· Conduct safety training of employees

· Conduct regular site checks and takes appropriate corrective actions

· Perform other related duties as directed that correspond to the overall function

· At least 3 years of working experience in HDB (BTO) project

· Possess Certificate in Workplace Safety and Health (WSH)

· Good knowledge in ISO and OSHA safety standards

Responsibilities:

• Generate purchase and delivery orders and invoices
• Check all payment invoices for accuracy and prepare payments to suppliers
• Liaise with suppliers to place order
• Liaise with customers and installation team and manage installation schedule and routes
• Preparation of sales quotation and follow up with customers on confirmed sales orders

Requirements:

• Able to perform and eager to learn
• Good negotiation and communication skills
• Able to work under pressure
• Computer literate and good communication skill
• Immediate Availability/within short notice
• Working hours & days：5 days work week 9am to 6pm
• Working location - Ubi

Responsibilites:

• Maintaining and monitoring project plans, project schedules, work hours, budgets, and expenditures
• Organizing, attending, and participating in stakeholder meetings
• Documentation and following up on important actions and decisions from meetings
• Preparation of necessary presentation materials for meetings
• Ensuring project deadlines are met
• Determining and assisting in project changes
• Providing administrative support when required
• Undertaking project tasks as required
• Assist in the development of project strategies alongside the management
• Ensuring projects adhere to necessary frameworks and all documentation is maintained appropriately for each project as required
• Assessment of project risks and issues and providing solutions wherever applicable
• Ensure stakeholder views are managed and aligned towards the best solution.
• Facilitate meetings where appropriate and distribute minutes to all project team members
• Adhere to project management calendar for fulfilling each goal and objective

Requirements:

• Working hours & days: 5.5 days work week
• Working location: CBD Area

Overview

As a Project Coordinator, you would work closely with clients to schedule, plan, monitor, forecast, resource and manage all the project activities aiming at assuring project accuracy and quality from conception to completion. You will be involved in getting shop-drawings approved and proposed rectifications on any defects found. You will ensure that the documentation system is always up to date and in line with ISO guidelines and customers expectation.

Responsibilities

1) Work closely between Singapore and Malaysia Plant to ensure smooth delivery of materials and precast components at sites.

2) Work closely with cross department team to ensure information and issues are clearly defined and resolved.

3) Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.

4) Attend site meetings, feedback on sites progress and schedules, justify defects components and arrange for rectification, pre-delivery and post-delivery activities, etc.

5) Interact daily with the clients to interpret their needs and requirements and represent them in the field.

6) Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status.

7) Plan, manage and coordinate projects to ensure that the projects are completed on time, within budget and of highest quality.

8) Liaise with the client, consultant, vendors, subcontractors and other relevant parties on field / factory inspection issues pertaining to the quality and project issues.

9) Cooperate and communicate effectively with project manager and other project participants to provide assistances and technical support.

10) Attend required interdepartmental meetings including providing relevant updates on the status of project and QC matters and to obtain and relay information which may impact the project pipeline.

11) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Minimum Degree in Civil / Building / Construction or equivalent.

2) Minimum 1 year of relevant work experience in a Precast or Building & Construction environment with at least 1 year of supervisory capacity.

3) Knowledge of HDB precast construction practices and erection sequence.

4) Knowledge of relevant Statutory requirements and compliances.

5) Familiarity with rules, regulations, best practices and performance standards.

6) Good interpersonal skills to communicate with people of all levels.

7) Willing to work on Sundays or Public Holidays if required.

8) Proficient in Microsoft Office.

9) Someone with a Class 3 Driving License will be advantage.

Job Descriptions

• Support the BIM Manager to develop and implement BEP for the assigned project(s).
• Execute BIM implementation processes as per agreed BEP.
• Responsible for managing and coordinating project BIM standards development, implementation, and enforcement on all related BIM deliverables.
• Coordinate BIM workflows and processes across all project disciplines.
• Manage and maintain the central BIM model, ensuring version control and data integrity.
• Conduct regular BIM model reviews to identify and resolve coordination issues.
• Prepare and deliver BIM deliverables, such as BIM models, clash reports, asset data, 3D visualizations, etc.
• Track and report on BIM progress and identify potential issues.
• Train and support project team members on BIM workflows and software.
• Participate in project meetings and provide BIM expertise.
• Other related project BIM uses implementation and their BIM deliverables submission activities.

Job Requirements

• Degree or Diploma in Civil Engineering, Architectural, Mechanical Engineering or Building Services Engineering with at least 5 years of working experience in design engineering, construction engineering or Integrated Digital Delivery (IDD) project management.
• 4 years of relevant BIM experience as a Project level BIM Coordinator role in a large scale or infrastructure project and has completed one full project cycle at design phase or construction phase is an advantage.
• Candidate possess Certificate in Building Information Modelling (BIM), BIM Management or DDM tier3 is an advantage.
• Conversant in a coordination software such as Navisworks Manage, Autodesk Construction Cloud/BIM360 is an advantage
• Strong analytical and critical thinking skills;
• Good negotiation, communication and stakeholder management skills;
• Resourceful, independent and able to work in a fast-paced environment.

Job Description

• Ensure compliance of operations with Workplace Safety and Health/Environmental Control regulations and statutory requirements
• Follow up with the committee site walk inspection findings for WSH Officer to close up the report and assisting WSH Officer on incident/accident investigation.
• Responsible for daily checklists are properly documented and carry out mass toolbox meeting once a week.
• Coordination with relevant site in-charge on improving the worksite safety and cleanliness.
• Ensure supervisors and workers are following safe work procedures compliance.
• Assist WSHO to organize monthly Safety Committee meetings and put up safety reports, including safety issues
• Compiles all relevant reports and records and carry out daily safety inspection
• Supervise all workers in providing safety measures and procedures in accordance with MOM Regulations
• Any other ad-hoc duties assigned by superior from time to time

Requirements

• Possess a Certificate in Safety Coordinators Course from approved institutes
• Min. 2 years relevant experience in Building and Construction Industry
• Proactive with excellent interpersonal skills and analytical ability
• Ability to work under pressures in a fast pace environment
• Experience in Private Housing and Civil Project will be advantageous.

Please include the projects you have worked on in your resume.

1. Must possess at least Diploma in Construction related field with about 4 years relevant experience in construction supervision
2. Able to start by 3 February 2025

The Site Coordinator will be responsible for overseeing the daily operations of a specified site, ensuring a positive and safe environment for staff, customers, and visitors. This role manages the staff and activities at the site, ensuring that all tasks are completed in a timely and efficient manner.

What You Will Deliver

• Responsible for all delivery route planning for client products
• Process all client job orders into system promptly and accurately
• Tabulate KPI reports, analyse and update findings to management
• Maximise fleet utilisation through effective route planning for delivery and assembly team
• Ensure delivery teams optimum productivity and utilisation rates
• Attend weekly meetings and handle feedback and issues related to route planning
• Perform any other duties assigned to you by your supervisor

Who you are

• Minimum GCE O'Level/Diploma in Supply Chain, Logistics or Business related disciplines
• Preferably equipped with 1-2 years relevant experience in logistics industry with route planning would be a bonus
• Familiar with Singapore street maps and roads
• Dynamic, proactive and able to work independently as well as in a team
• Organised, detailed and able to perform in a deadline-driven environment
• Excellent communication and interpersonal skills
• Proficient in Google Suite and MS office applications
• Experience in Navision will be a plus
• Able to commit to rotating shifts, weekends and public holidays

Responsibilities:

• Coordinate and Monitor progress, quality of worksmanship and compliance with contract requirements.
• Coordinate with sub contractors for all project matters
• Communicate with clients and manage their expectations
• Oversee quality control procedures to ensure adherence to project specifications and industry standards.
• Coordinate project closeout activities, including final inspections, documentation, and handover of completed projects to clients.
• Assists in promoting good team morale and team spirit in the project team
• Ensure all safety regulations are observed at all work sites
• Ad-hoc duties

Requirements:

• Experience in site co-ordination and project management
• Interior Design / Carpentry / Joinery knowledge preferred
• Ability to work independently in a fast pace environment with minimal supervision needed
• At least 2 year(s) of working experience in the related field
• Able to start work within short notice

Job Responsibilities

1. Develop, implement, and maintain comprehensive safety programs to ensure a safe working environment.
2. Ensure that all safety policies and procedures are followed and regularly updated to comply with local, state, and federal regulations.
3. Promote awareness and adherence to safety guidelines across all levels of the organization.
4. Conduct regular safety inspections of the workplace to identify potential hazards or safety violations.
5. Prepare and perform risk assessments (RA), SWP and FPP processes to minimize workplace risks.
6. Ensure corrective actions are taken when necessary, and hazards are reported and managed.
7. Maintain training records and ensure employees are up-to-date with required certifications and safety protocols.
8. Prepare and submit required reports and documentation to regulatory bodies and senior management.
9. Keep up-to-date with new and changing safety regulations and advise the organization on necessary adjustments.
10. Ensure proper reporting and documentation of workplace accidents, injuries, and near-misses.
11. Investigate accidents and incidents to determine the root cause and recommend corrective actions to prevent recurrence.
12. Maintain records of incidents and safety inspections for compliance purposes.
13. Monitor the availability and proper use of personal protective equipment (PPE) and ensure that employees are trained to use it properly.
14. Ensure safety equipment, fire extinguishers, first-aid kits, and other emergency tools are properly maintained and accessible.
15. Assist corporate HSE manager on EHS implementation.

Job Requirements

1. Diploma in relevant discipline or equivalent.
2. Certificate in Safety Coordinator / Advance certificate in Workplace Safety & Health.
3. Minimum two (2) years' of relevant safety experience.
4. Knowledge of Workplace Safety & Health Act.
5. Knowledge of RC work activities and PTW system.
6. Knowledge in preparing EHS report.
7. Willing to travel around project site offices within Singapore.
8. Only Singaporean or Permanent Residents need apply.

Key Responsibilities

• Oversee and coordinate the development of BIM models across various disciplines (architecture, structural, MEP, etc.).
• Ensure the integration of models from different teams and disciplines, ensuring compatibility and alignment with project requirements.
• Facilitate the use of common data environments (CDE) for the management and sharing of BIM data and models.
• Ensure that all team members adhere to project-specific BIM protocols, standards, and workflows.
• Use BIM software (e.g., Navisworks, Revit) to perform clash detection and conflict resolution between models.
• Coordinate the resolution of clashes or conflicts by collaborating with design teams to make necessary adjustments to the models.
• Organize regular coordination meetings to address any model integration or clash issues.
• Ensure that all BIM models are accurate, complete, and up to date, adhering to established quality standards and specifications.
• Conduct regular audits of models to check for consistency, accuracy, and compliance with project requirements.
• Support team members in maintaining the quality of models and data throughout the project lifecycle.
• Provide technical support and training to project teams regarding BIM software, workflows, and best practices.
• Help resolve technical issues related to BIM tools and ensure smooth communication across teams.
• Stay up to date with new BIM tools, technologies, and best practices and share knowledge with the team.
• Prepare and maintain BIM-related documentation, such as BIM execution plans, coordination reports, and model review checklists.
• Generate and distribute regular reports on BIM progress, clash resolutions, and model integration status to project stakeholders.
• Keep track of the project's BIM-related deliverables, ensuring they are completed on time and according to specifications.
• Act as the primary point of contact for all BIM-related matters, facilitating communication between different project teams.
• Attend and participate in project meetings, providing updates on BIM progress and addressing any issues.
• Work closely with project managers, designers, engineers, and contractors to ensure seamless BIM integration across all phases of the project.

Qualifications

• Bachelor’s degree/Diploma in Architecture, Engineering, Construction Management, or a related field.
• Certification in BIM (e.g., Autodesk Certified Professional, Revit certification).
• Minimum of 3 years of experience in BIM coordination or a related role within the architecture, engineering, or construction industry.
• Proven experience with BIM software such as Autodesk Revit, Navisworks, AutoCAD, and BIM 360.
• Experience with clash detection and coordination tools is highly preferred.
• Familiarity with BIM standards, protocols, and the implementation of BIM processes in construction projects.
• Strong understanding of BIM processes and workflows, including model creation, coordination, and integration.
• Proficiency in BIM software (e.g., Autodesk Revit, Navisworks, BIM 360, etc.).
• Ability to manage and coordinate complex projects across multiple teams and disciplines.
• Excellent problem-solving skills and ability to troubleshoot model coordination and technical issues.
• Strong organizational and time-management skills.
• Excellent communication skills, both written and verbal, to interact with internal teams and external stakeholders.
• Attention to detail and a commitment to quality and accuracy in BIM models.

Job Responsibilities

1. Develop, implement, and maintain comprehensive safety programs to ensure a safe working environment.
2. Ensure that all safety policies and procedures are followed and regularly updated to comply with local, state, and federal regulations.
3. Promote awareness and adherence to safety guidelines across all levels of the organization.
4. Conduct regular safety inspections of the workplace to identify potential hazards or safety violations.
5. Prepare and perform risk assessments (RA), SWP and FPP processes to minimize workplace risks.
6. Ensure corrective actions are taken when necessary, and hazards are reported and managed.
7. Maintain training records and ensure employees are up-to-date with required certifications and safety protocols.
8. Prepare and submit required reports and documentation to regulatory bodies and senior management.
9. Keep up-to-date with new and changing safety regulations and advise the organization on necessary adjustments.
10. Ensure proper reporting and documentation of workplace accidents, injuries, and near-misses.
11. Investigate accidents and incidents to determine the root cause and recommend corrective actions to prevent recurrence.
12. Maintain records of incidents and safety inspections for compliance purposes.
13. Monitor the availability and proper use of personal protective equipment (PPE) and ensure that employees are trained to use it properly.
14. Ensure safety equipment, fire extinguishers, first-aid kits, and other emergency tools are properly maintained and accessible.
15. Assist corporate HSE manager on EHS implementation.

Job Requirements

1. Diploma in relevant discipline or equivalent.
2. Certificate in Safety Coordinator / Advance certificate in Workplace Safety & Health.
3. Minimum two (2) years' of relevant safety experience.
4. Knowledge of Workplace Safety & Health Act.
5. Knowledge of RC work activities and PTW system.
6. Knowledge in preparing EHS report.
7. Willing to travel around project site offices within Singapore.
8. Only Singaporean or Permanent Residents need apply.

Job Description

• Responsible for the implementation of Structured Cabling System (Voice/Data/Fiber Optics);
• Presales support;
• Prepare layout / Shop / Schematic Drawings;
• Implement and maintain high quality / safety standards at site;
• Perform User Acceptance Test and Handing Over of Projects with Clients & Consultants;
• Prepare, compile, and maintain proper documentation for all projects;
• Attend site meetings & liaise with contractors/consultants;
• Co-ordinate, manage resources, personnel & execute project works within the designated time frame;

Requirements

• Min GCE “O” level equivalent, ITE or Diploma in Electrical/Mechanical or related fields
• Good in computer software especially in Autocad, MS Visio & MS Project
• Ability to multi-task
• A team-player with pleasant personality and positive mind-set