The Senior Manager, Material Review Board (MRB) will work directly with the Aerostructures Global MRB manager to ensure best practices are developed and deployed across the Value Streams and Manufacturing sites. You will provide expertise between the organization and both internal/external customers to ensure their requirements and expectations are satisfied. You will be responsible for driving the deployment of strategic MRB initiatives across the Aerostructures organization, by collaborating with leaders across all Asian and European sites and value streams. In addition to supporting key initiatives, you will lead and integrate individuals and teams in global locations.

This position will work in a hybrid capacity, located near one of our APAC sites.

Responsibilities:

• Responsible to identify esource needs, to help teams, to attract and retain employees.
• MRB team members development.
• Identify and support the development and implementation of strategic initiatives.
• Provide guidance to the MRB, Engineering, Quality and Program Leaders across all programs and European and Asian sites Collaborate with all functions of the organization to continuously improve the Aerostructures MRB process.
• Provide expertise and participate in the deployment and improvement of process improvement tools and methods.
• Assist in the review and approval of specific quality documents, such as Quality/MRB Plans.
• Participation and preparation for customer, third party regulatory and internal audits.
• Lead MRB Process Reviews and improvements using continuous improvement tools.
• Create and maintain visual controls for management status meetings.
• Review MRB metrics to identify adverse trends and create/deliver impactful presentations to all levels of the organization and customers.

Basic Qualifications:

• Bachelor’s degree and 10 years of prior relevant experience OR
• Advanced Degree in a related field and minimum 7 years of experience
• Travel up to 20% to support multiple global manufacturing sites.
• Experience in Aerospace MRB discipline.
• Experience leading or managing teams across multiple locations.

Preferred Qualifications:

• Certified MRB.
• Experience with aircraft nacelles using composite and metallic structures and its manufacturing processes.
• Experience with composite and metallic repairs on aircraft nacelles.

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• Update the Maintenance Organization Exposition manuals, and associate documents.
• Actively drive the Safety Management System and manage the Hazard Identification & Risk Assessment system
• Conduct internal and vendor audits (SMS, SABRe, Part 145 regulations, ISO, Nadcap) to improve compliance
• Actively support external audits (SMS, SABRe, Regulatory Authorities, Customers, ISO, Nadcap)
• Monitor and analyze audit/investigation/voluntary reporting data and identify issues/opportunities for improvement
• Review / support vendor & customer quality questionnaire
• Develop and conduct regulation trainings
• Manage staff authorisation system by reviewing the qualifications and conduct competency interviews for certifying staff & internal stamp holders
• Actively drive initiatives like Narrate & Demonstrate (N&D), Behavior Based Safety (BBS), Foreign Object Damage (FOD),
• Drive the SAESL Operating System and SAESL Enhanced Work Streams (SEWS) to inculcate strong safety culture
• Take on ad-hoc projects / assignments to promote safety culture

Requirements

• Diploma / Degree in Mechanical / Aerospace Engineering
• Good knowledge on regulatory Part 145 requirements, ISO9000 and Nadcap
• Knowledge on data analysis and its tools (Minitab, Power BI etc) will be added advantage
• Qualified Lead Auditor and have experience in conducting aviation safety and regulation audits
• Min 3 years of experience in managing the Quality Management System and Safety Management System

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling
• Industrialize additive manufacturing capability through the development of new process and procedures
• Manage the transfer of new products and know-hows from pre-production site to manufacturing site for mass production. Successful candidate will be expected to be posted overseas for training and technology transfer
• Implement and deliver new repairs by designing and fabricating new repair fixtures/ tooling; developing process parameters; and validating repair setup through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Effectively apply process control (SPC) to monitor, analyze and define errant processes; and to refine processes to reduce variability
• Function as on-site technical authority and liaise with technical specialists for laser-related processes.
• Lead and own laser blown powder deposition activities
• Any other duties as assigned by supervisor

Requirements

• Bachelor's Degree in Manufacturing, Material Science, Mechanical Engineering or related field
• Possess knowledge (theory and practical) on laser cladding (solid state lasers and blown powder laser) and metallurgical characterization
• Understanding of common component repair processes (welding, heat treatment, machining, NDT) and familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Experience in beam characterization using commerically available equipment
• Ability to read and understand manufacturing drawings and GD&T
• Able to multi-task and work well under pressure as an individual/ team
• Possess good communication, analytical , engineering and project management skills
• Good technical problem solving skills, takes ownership and hands-on approach

• Perform qualification validation of medical device sterilization related equipment and processes
• Perform the release of sterilization batches in accordance to relevant ISO standards
• Ensure the compliance of equipment in accordance to Calibration and Preventive Maintenance requirements.
• Perform complaint handling, investigate root cause of complaint, and perform Corrective Action and Preventive Action as necessary.
• Handle non-conformances and perform disposition of rejected parts, trend yield and rejects, investigate root cause of non-conformance and perform Corrective Action and Preventive Action as necessary.
• Initiate and/or execute engineering changes in compliance with Engineering Change Control procedures
• Participate in Process Failure Mode Effect and Analysis team to mitigate product risk arising from manufacturing
• Participate in external and internal audit to ensure company quality system is effective
• Participate in continuous improvement programs such as 6S program, yield improvement projects etc.
• Support new production introduction as a team member representing quality
• Perform other tasks as assigned by the supervisor

Education

• Bachelors Degree in Engineering, Science (e.g. Microbiology) or equivalent

Experience

• Work experience as a sterilization engineer in a medical device manufacturing environment
• Experience with qualification validation of equipment and processes for sterilization of medical device
• Working knowledge of ISO11135 EtO Sterilization for Medical Devices and/or any other relevant standards such as ISO11137 Gamma Sterilization
• ISO13485 Internal auditor

Skills

• Statistical Analysis (Hypothesis Testing, ANOVA, Gage R&R, DOE etc)
• Root cause analysis (Kepner-Tregoe, 5-Why, 6M etc)
• Problem solving techniques (e.g. DMAIC/8D/PDCA/A3 application in continuous improvement)
• Competent with general PC and Office software application

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling
• Industrialize adaptive manufacturing capability through the development of new process and procedures
• Manage the transfer of new products and know-hows from pre-production site to manufacturing site for mass production. Successful candidate will be expected to be posted overseas for training and technology transfer
• Implement and deliver new repairs by designing and fabricating new repair fixtures/ tooling; developing process parameters; and validating repair setup through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Effectively apply process control (SPC) to monitor, analyze and define errant processes; and to refine processes to reduce variability
• Function as on-site technical authority and liaise with technical specialists for CAM and non-contact measurement related repair processes.
• Lead and own CAM and non-contact measurement activities
• Any other duties as assigned by supervisor

Requirements

• Bachelor's Degree in Manufacturing, Material Science, Mechanical Engineering or related field
• Possess knowledge (theory and practical) on digital manufacturing and conventional machining
• Experience in operating non-contact measurement equipment and Siemens NX multi-axis manufacturing module
• Understanding of common component repair processes (welding, heat treatment, NDT) and familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Ability to read and understand manufacturing drawings and GD&T
• Able to multi-task and work well under pressure as an individual/ team
• Possess good communication, analytical , engineering and project management skills
• Good technical problem solving skills, takes ownership and hands-on approach

Responsibilities:

• Liaise with customers on shipment instructions and booking updates
• Permit declarations and customs clearance
• Coordinate, booking and tracking of Import shipments (Air & Warehouse)
• Handle transportation schedule and operations duties
• Monitor shipment status and update customer and sales team
• Liaise with overseas agents on various requirements and rates
• Prepare necessary documents for internal stakeholders to follow up
• Checking of shipments status
• Perform any ad-hoc duties assigned by superior

Requirements:

• Possess 2-3 years of airfreight experience
• High attention to details
• Able to work well independently
• Working Days: 5.5 days (Sunday / Public Holiday duty, according to work roster)
• Working Hours: 9am - 6pm & 9am - 1pm
• Working Location: 9 Airline Road

Job Description:

1. Provide TRAX technical system support to end-users. This includes assisting with access, system-related inquiries and issues.

2. Perform full testing of TRAX functionalities and enhancement before upgrading to new TRAX version.

3. Conduct trainings to all new TRAX users for formal introduction, briefing, tour and hands-on of the TRAX system.

4. Coordinates with TRAX USA for the resolution of system bugs, queries, update, review and evaluation of new functionalities and processing system modification.

5. Analyzes, evaluates and solves problems in order to ensure smooth workflow process and the attainment of the system implementation commitments.

6. Develop interim application program and reports generator system to our users in order to supplement their needs, which were not included in TRAX but will be integrated on the next upgrade of the said system.

7. Draft and solicit business requirements documents

Requirements:

1. Degree / Diploma in Electronics Engineering / Communication Engineering / Computer Engineering / Computer Science / IT

2. Minimum 2-3 years of experience providing IT support in a corporate environment

3. Proven experience as a Systems Administrator or similar role, with a focus on TRAX modules (eMROWeb, Production Control Web, Task Control Web and Shop Control Web) would be advantageous

4. Familiarity with ITIL best practices and experience in IT service management would be a plus.

Job purpose:

The Product Service Technician will work through tasks for specific product line scopes in the form of job cards. Tasks include cleaning, disassembly, servicing, greasing, assembly, and function testing, of mechanical and electrical systems on a marine craft. This includes diesel engines hydraulic, and networked systems. Some degree of fault finding, reporting of progress, and defects will be expected using an extensive range of engineering and operational skills/methodology.

Once the maintenance scope is completed craft will be returned to an operational state to the customer whilst another cycle kicks off.

Your principal accountabilities and other tasks will be carried out in the framework of our valued behaviors:

· Pioneering spirit: You will respond innovatively to our customers’ current and future needs. You will be entrepreneurial and think creatively to solve difficult problems. You will challenge conventional thinking and find better ways.

· Integrity: You will strive to do the right thing. You will treat everyone as you would like to be treated, creating relationships based on trust and fairness. You will collaborate by listening respectfully and speaking honestly.

· Energy: You will go above and beyond, delivering exceptional results to all stakeholders. You will take pride in making a positive impact and making the right decisions quickly.

· Resilience: You will be accountable and courageous and face up to difficult situations. You will be tenacious in the pursuit of the company’s purpose. You will see feedback, you will learn, and you will develop with your team.

At all times you will adhere to, and promote James Fisher and Sons plc's Health, Safety, Environment, and Quality standards in addition to Life Saving Rules.

Principal Accountabilities:

· Be available to report for duty at Changi Naval Base/JFD workshop in accordance with task planning.

· Supervise and conduct the planned maintenance and defective technical activities for the marine systems in accordance with approved technical manuals, plans, and procedures. An ability to read technical drawings and procedures.

· Applying knowledge and experience to delegated maintenance tasks.

· Attention to detail while working across a range of tasks and systems.

· Accurate reporting and planning to support production scheduling. Must display good time management.

· Professionalism displayed is the conduct, behavior and attitude. Maintain a productive working relationship with the customer.

· Ability to work independently without supervision when under stressful situations.

· Demonstrate a willingness to participate in the Company’s Quality Management System

· Demonstrated commitment to following safety procedures and upholding a positive safety culture.

· Assist in maintaining and keeping up to date a technical library of publications, manuals, procedures, and drawings as appropriate. Reporting of discrepancies.

· Develop, regularly review, and maintain risk assessments and safety-related documentation of the system.

· Assist the Project lead with the planned maintenance and defect rectification activities.

· Liaise with the Project Lead in respect of all QA and Safety issues.

· Apply strong leadership and communication skills to influence and enforce a positive safety culture.

· Any other tasks as reasonably requested by the Project lead.

· Performing functional checks on the craft while deployed in test basin.

Accountabilities are not a list of tasks and activities carried out, but are concerned with the reasons why these tasks are undertaken, i.e. WHAT is required of it rather than HOW a job is to be done.

Typically, there will be between 4 and 8 Principal Accountability statements for each job. If there are more than eight it is likely that tasks are being listed. Less than four suggests accountabilities are being grouped together, or the design of the role may need revisiting.

Knowledge, experience and skills required:

The role will require a broad base of experience in the engineering, marine, and associated industries including the following:

· Recognized technical qualification such as diploma-relevant subject.

· A minimum of 5 years’ experience in mechanical/electrical system maintenance, operations and troubleshooting.

· A minimum of 5 years’ experience in pneumatic/hydraulic/marine disciplines

· Medically fit to be deployed and work onboard a ship which will involve working in small spaces and lifting and moving equipment.

· Excellent written and verbal communication skills.

Demonstrate the willingness to participate in the Company’s Quality Management system and undertake auditor training and functions across the Company.

Authorities and Responsibilities

1. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives.
2. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
3. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with customers, production and suppliers to meet the quality requirements.
7. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
8. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
9. Manage the implementation / schedule of calibration control.
10. Participate in the implementation of risk assessment and risk control of medical devices

Competence Requirement

• Preferred to have NTC / Diploma / Degree in Precision / Mechanical Engineering or related discipline.
• Fresh degree may be considered while other educational qualification is required with preferred 3 - 8 years of relevant working experience in related Engineering industry.
• Possess good analytical, verbal, written and interpersonal skills.

Job Description Summary:

- To maintain all different production equipment to generate the best desired output, overall equipment effectiveness, mean time between failure and mean time to repair.

Responsibilities:

-Production machinery and equipment maintenance • Maintain and repair all different production equipment to generate the best desired output, Overall Equipment Effectiveness (OEE), Mean Time Between Failure (MTBF) and Mean Time To Repair (MTTR)

- Troubleshoot in accordance with the checklists, monitoring procedures, mini specification, and any engineering instructions in compliance with customers’ requirement and internal quality standards.

- Perform real-time equipment troubleshooting, repair, calibration and conduct periodic and non-periodic equipment preventive maintenance

- Manage spare part inventory and maintain the production facility clean and safe. • Ensure that materials are used and handled appropriately to avoid scraps

- Perform daily 5S housekeeping and Total Productive Maintenance (TPM)

Requirements:

- Diploma in Mechanical/Electronics/Mechatronics Engineering or equivalent

- Entry level candidate are welcomed to apply as training provided.

- Able to work on 12 hours shift.

- Manufacturing experience would advantage.

RESPONSIBILITIES

Manufacturing/ Production Line setup, pre-qualification and maintenance.
Provide technical support to customer related to assembly/ manufacturing.
Develop process and generate work instruction.
Review drawing, customer specifications and Bill of Materials cleanup.
Assembly, test, and commissioning of highly automated industrial equipments.
Train, certify and monitor assembly technicians.
Develop necessary technical competencies and equipment capabilities to meet operational performance targets
Work and collaborate with Production to achieve the desired quality and output
Conduct MRB to review non-conformance parts disposition.
Design/Fabricate tools, jigs and fixtures.
In-process yield/reject/scrap rate monitoring.
Lead and drive the team to participate in all continuous improvement projects related to cost, quality, utilisation & productivity using Six-sigma or similar applicable technology such as Cpk, FMEA, Lean etc
Any other duties assigned by his/her superior / Manager.

REQUIREMENTS

Minimum three years of relevant experience in Equipment Manufacturing Industry preferably wire bonding Equipment (Ball Bonding/Wedge Bonding/Die Bonding)
Diploma in Mechanical/Mechatronics/Electrical Engineering or equivalent
Proficiency in equipment troubleshooting techniques
Strong problem solving and analytical skills with good knowledge of SPC
Good leadership / presentation / communication / team building skills
Ability to work proactively and to identify issues and propose solutions
Able to design and implement effective systems, processes and informatio/ reporting mechanisms
Experience in Lean Manufacturing and ISO system

Please indicate your current and expected remuneration.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Key Responsibilities

1. Develop new procedures and Best Known Methods (BKMs) to service new products. Contribute to the FMECA process.
2. Participate in or own first chamber Build & Test in Apps lab. Solve issues, or work with Engineering to address issues identified. Work with Manufacturing to develop procedures and participate (if required) on New Product final test
3. Partner with Quality & Reliability (Q&R) group to review and address Top Field Issues. Participate in or own CAPA process. Conduct or facilitate Failure Analysis (FA) if needed
4. Develop and document procedures to install (start-up), retrofit and maintain the product (Technical Product Manuals)
5. Develop new procedures, Customer Engineering Notices (CENs), Internal Service Bulletins (ISBs) and troubleshooting guides as required
6. Collect process and qualification data to create product Best Known Methods (BKMs)
7. Develop initial training package for new products and work with Global Technical Training (GTT) to develop training class. Train Customer Engineers (CEs), Process Engineers (PSEs) and Technical Product Support (TPS) assigned to customers who will receive ELS Shipments, prior to shipping
8. Identify new parts that require to be stocked by AGS and work with them to ensure parts are stocked in correct locations

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Job responsibilities:

• Overall project planning, schedule and executing the delivery of projects within time, budget and Client’s expectations.

• Monitoring progress and identifying critical activities to expedite smooth progress of works on site to meet targets.

• Coordinate internal resources and third parties/vendors e.g. Consultants and Sub- Contractors/Suppliers for the flawless execution of all projects.

• Ensure that all projects are delivered on-time, within scope and within budget.

• Ensure that work are executed in accordance with approved plans/drawings, contract specifications and regulatory requirements.

• Ensure resource availability and allocation.

• Develop detailed project plan to monitor and track progress.

• Manage changes to projects’ scope, schedule and costs using appropriate verification techniques.

• Perform risk management to minimize project risks.

• Measure project performance using appropriate tools and techniques.

• Create and maintain comprehensive project documentation.

• Responsible for the overall project management, planning & control, and execution, including project budget evaluation and profitability.

entify and comply with all applicable statutory/regulatory requirements related to the project.

Lead a team of professional and technical staff in planning and execution of day-to-day operations to achieve all key project target.

Respond swiftly to work delays, emergencies, and other problems.

• Report and escalate to Management as needed.

• Any other duties that may be assigned.

Requirements:

• Proven at least 3 years of working experience in project management in the public and private residential, government and commercial building projects.

• Solid technical knowledge related to structural, architectural (finishing) or M&E works.

• Solid organizational skills including attention to detail and multi-tasking skills.

• Excellent written and verbal communication skills.

• Excellent team player with ability to meet tight deadlines.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

The Customer Services Assistant provides assistance to customers at check-in counters. He/she ensures that passengers’ details match the information on travel documents and handles customer issues regarding flight operations and automated check-in systems. To maintain a safe working environment, he/she complies with all safety and/or security standards and reports safety and/or security breaches to officers and supervisors.

The Customer Services Assistant demonstrates professional behaviour when responding to passenger complaints and acts as a service ambassador for the organisation. He/She works in shifts to accommodate round-the-clock flight arrivals and departures. He/She is physically strong to assist passengers with lifting of their baggage. Furthermore, he/she is service-oriented, possesses good communication skills as well as handles passengers with special needs in an appropriate manner.

Duties and Responsibilities

• Provide quality customer services
• Service customers at the check-in counters
• Verify passengers' identities at the gates
• Verify information on travel documents, passports and/or visas
• Provide support to special needs customers
• Handle customer issues regarding irregular flight operations
• Process customer documentation
• Handle customer issues regarding automated check-in systems
• Uphold safety and/or security standards
• Interpret and follow individual safety and/or security standards in the workplace
• Identify and report breaches of safety and/or security standards in the workplace

Requirements

• Minimum GCE 5 “N” levels and above
• Customer service experience preferred

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job responsibilities:

• Overall project planning, schedule and executing the delivery of projects within time, budget and Client’s expectations.

• Monitoring progress and identifying critical activities to expedite smooth progress of works on site to meet targets.

• Coordinate internal resources and third parties/vendors e.g. Consultants and Sub- Contractors/Suppliers for the flawless execution of all projects.

• Ensure that all projects are delivered on-time, within scope and within budget.

• Ensure that work are executed in accordance with approved plans/drawings, contract specifications and regulatory requirements.

• Ensure resource availability and allocation.

• Develop detailed project plan to monitor and track progress.

• Manage changes to projects’ scope, schedule and costs using appropriate verification techniques.

• Perform risk management to minimize project risks.

• Measure project performance using appropriate tools and techniques.

• Create and maintain comprehensive project documentation.

• Responsible for the overall project management, planning & control, and execution, including project budget evaluation and profitability.

entify and comply with all applicable statutory/regulatory requirements related to the project.

Lead a team of professional and technical staff in planning and execution of day-to-day operations to achieve all key project target.

Respond swiftly to work delays, emergencies, and other problems.

• Report and escalate to Management as needed.

• Any other duties that may be assigned.

Requirements:

• Proven at least 3 years of working experience in project management in the public and private residential, government and commercial building projects.

• Solid technical knowledge related to structural, architectural (finishing) or M&E works.

• Solid organizational skills including attention to detail and multi-tasking skills.

• Excellent written and verbal communication skills.

• Excellent team player with ability to meet tight deadlines.

Job Description

Key Responsibilities

1. Manage customer expectation and issues with software releases providing a prioritized list of requests to business unit per platform. Independently learn and investigate customer's high value problem (HVP), systematic bug or systematic software failures.
2. Troubleshoots a variety of difficult software problems and interface with engineering teams to improve product quality.
3. Interfaces with external customers for requirements analysis and schedule.
4. Manage software proliferation at customer sites. Deliver software implementations and manage customer to achieve project objectives.
5. Performs customer specific software testing and analysis on bugs and enhancements.
6. Track software performance and quality at external customer sites.
7. Provide on-going training to customers and customer engineers (CE) for technical products and systems issues. Deliver updates and reports to managers, partners and peers.
8. Assist in training junior level engineers in departmental procedures, corporate procedures, and detailed product operation. Lead work groups and troubleshooting forums.

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.