Requirements

• Diploma in Electronics / Electrical / Mechanical engineering or equivalent.
• Bilingual in English & Mandarin is essential to communicate with supplier.
• 3 years relevant working experience in related functions in manufacturing industry.
• Experience in supplier qualification, incoming inspection, source inspection, equipment calibration and ISO9001 documentation.
• Familiar with respective supplier processes.

-Mech examples: metal machining/ welding, plastic machining/welding, surface treatment, metal stamping, casting, molding, …etc.

- Elect examples: wire crimping, cable assembly, continuity testing, PCBA …etc.

• 4. Familiar with APQP / PPAP / QCP / SPC / FMEA / 8D / 5S / GD&T / GR&R / DOE / IPC610 / Weld Joints & Symbols, will be an advantage.

Responsibilities

• Responsible for implementing continuous quality improvement programs with the suppliers as well as reviewing and updating incoming inspection procedures, practices, and part quality plans to ensure that they are implemented effectively.
• Perform supplier performance audit and monitor supplier performance through incoming inspection performance and monthly supplier review meeting.
• Review drawings & customer specification with suppliers on measurement method and reports.
• Train and monitor IQA inspectors’ method & criteria.
• Conduct source inspection when required.
• Conduct MRB to review non-conformance parts disposition.
• Conduct purge control when there is a Quality Alert raise during in-process.
• Monitor and arrange measurement tools/equipment/fixture for calibration.
• Work with suppliers to identify root causes and resolve quality issues.
• Raise VCAR to supplier when supplier failed two consecutive lots on the same defect category.
• Raise vendor improvement plan & review for top five valued suppliers and top five worst suppliers.
• Converge to BDG on customer consign part, if out of specification, the instruction how to dispose the non-conformance part.
• Manage the customer specific requirements and offer technical support to suppliers.
• Responsible for ensuring that the products produced meet quality standards required to minimize quality costs and maximize customer satisfaction whilst ensuring that procedures and processes are adhered to.
• Analyze supplier’s non-conformance data/trend to drive supplier for quality strategic improvement plan.
• Periodically quality meeting with suppliers to ensure quality issues are addressed and CAPA is implemented, effective and closed.
• Work reviewed at project milestones and/or on completion by Senior Management.
• Raise ICAR & VCAR to manufacturing and supplier on quality issue.
• Report abnormality of customer part to CQE & BDG.
• Liaise with suppliers on quality related matters.
• Perform suppliers audit and review.
• Any other duties assigned by his/her superior / Manager.

Job Description:

• Advise appropriate service/repair requirements to meet customer needs.
• Act as a key communication link between customers and the workshop to ensure responsiveness.
• Monitor job progress and update customers on repair status.
• Responsible for daily intake of cars for servicing
• Provide excellent customer service to customers
• Any other ad-hoc job assigned by the supervisor

Job Requirements:

· Basic vehicle knowledge is required for this position.

· Great teammate with initiative and a positive attitude towards learning

· Self-motivated individual with a strong sense of responsibility

· Preferably, a valid class 3 driving license would be an advantage

Job Responsibilities:

• Develop and foster strong relationship with key account.
• Serve as the key liaison person between client and internal departments on request and issue resolution.
• Take ownership of key account’s new program implementation. Engage in initiative and project discussion. Lead and monitor implementation progress.
• Manage, monitor and control stockholding. Prepare stockholding and indent reports for monthly reviews.
• Support monthly KPI metrics and perform root cause analysis to improve metrics & performance, timely submission of internal and external reporting, as well as, present operational KPI.
• Manage Replenishment and inbound Inventory in line with the forecast or indent, commercial and stock holding requirements.
• Review materials forecast and execute Supply Plan, analyses Key Planning Parameters to achieve a balance between Inventory and Forecast.
• Analyse Forecast Variance and identify strategies to improve the Forecasting process to minimize the variance.
• Analyse the variance of demand and supply, pro-actively monitor the fulfillment gaps, drive investigation of root cause and recovery plan
• Establish appropriate safety stock level meeting required service levels.
• Drives continuous improvement initiatives to meet inventory goals
• Reviews slow moving items, block inventories according to Excess and Obsolescence Policy.
• Effectively use ERP system to manage high number of material SKUs.
• Review work processes and initiate process improvement plans.

Job Requirements:

• Degree in Business / Operations Mgmt / Supply Chain Mgmt / Industrial Engr or related discipline.
• Preferably 2 years relevant experience in key account management, logistics, warehousing, pharmaceutical or distribution industry.
• Strong analytical, problem-solving, communication and process mapping skills.
• Working knowledge of SAP system and proficient in Microsoft® Office tools and related software.

Job Description

Responsibilities

The Environmental, Health and Safety (EHS) Engineer is responsible for developing, implementing, and continually improving company’s safety and health programs and procedures to ensure personnel and plant wide Health and Safety. This individual is required to monitor and conduct EHS audits to identify level of implementation & effectiveness of EHS management system, identify & recommend measures/approaches to close gaps/improve the management system. He/she will also be liaising with inter-departments and external organizations on EHS compliance issues.

• Supports site's compliance with WSH Regulations.
• Monitor and track timely completion of activities, initiatives and action items in Corporate SMART Reporting System, while supporting PDPR Dashboard Reporting.
• Manage and maintain the facilities to ensure compliant with local EHS regulations.
• Ensure organization meets all legal licensing requirements with regards to occupational health and safety.
• Develop and conduct inspection & audit program by identifying root causes of deficiencies and completion of preventive and corrective actions.
• Establish & lead trend analysis, audits, accident investigations and site inspections of operational procedures, facility design, equipment and materials.
• Oversee Industrial Hygiene Screening for site personnel.
• Drive & champion Behavior Based Safety System.
• Conduct trainings to educate organization of best practices and regulatory/corporate requirements when necessary.
  
  Requirements:
• Degree in Safety, Health & Environmental Engineering.
• Degree in Electrical and Electronics Engineering will be considered for the role.
• Specialist Diploma in Occupational Health & Industrial Hygiene is a plus.
• Minimum 3 years’ experience in the EHS profession. Fresh graduates will be considered for the role.
• Experience in planning, development and implementation of EHS management systems and compliance
• Lead and drive hazard identification and risk assessment methodology.
• Good knowledge of local legislation (eg. WSH/NEA/SCDF), BIZSAFE, ISO 14001 & 45001 requirements.
• Fire Safety Manager and/or WSHO is an added advantage.
• Analytical, meticulous, resourceful and able to meet tight deadlines in a fast-paced work environment.
• A team player with good communication, interpersonal and organizing skills.

1.⁠ ⁠Project Design and Implementation

- Design and develop logistics systems, processes, and workflows.

- Create detailed project plans, including timelines, budgets, and resource requirements.

- Oversee the implementation of logistics projects, ensuring adherence to project plans and specifications.

2.⁠ ⁠Process Optimization

- Analyze current logistics operations to identify inefficiencies and areas for improvement.

- Develop and implement strategies to optimize transportation, warehousing, and distribution processes.

- Utilize Lean, Six Sigma, or other process improvement methodologies to enhance logistics performance.

3.⁠ ⁠Data Analysis and Reporting

- Collect and analyze data related to logistics operations and performance metrics.

- Generate reports to provide insights and support decision-making.

- Develop and maintain dashboards to monitor key performance indicators (KPIs).

4.⁠ ⁠Technical Support and Troubleshooting

- Provide technical expertise and support to logistics teams.

- Troubleshoot and resolve issues related to logistics systems and processes.

- Collaborate with IT and other departments to ensure the smooth functioning of logistics technologies.

5.⁠ ⁠Stakeholder Collaboration

- Work closely with suppliers, vendors, and internal departments to coordinate logistics activities.

- Communicate project updates and changes to stakeholders effectively.

- Foster strong relationships with all stakeholders to facilitate smooth project execution.

6.⁠ ⁠Compliance and Risk Management

- Ensure logistics operations comply with all relevant regulations, standards, and company policies.

- Identify potential risks and develop mitigation strategies.

- Conduct regular audits and assessments to ensure ongoing compliance and risk management.

7.⁠ ⁠Continuous Improvement

- Stay updated on industry trends and advancements in logistics and supply chain technologies.

- Implement innovative solutions to enhance logistics operations.

- Promote a culture of continuous improvement within the logistics team.

Working hours

• 5 days work week, fix off on Sun and rostering off day on Sat, Tue, Wed or Thu
• Working hours: 8.30am to 6pm
• Overtime work when required
• Working Location: Changi Cargo Agents Megaplex 1

Job Scope

• To monitor closely assigned customers’ inbound shipments
• Work closely with respective overseas offices to monitor its uplift at point of export till its arrival
• Update customers promptly of delivery date and if any irregularity to inform them
• Maintain close communication with overseas offices, internal customers, authorized contractors and ground handling agents to track closely its arrival and customs clearance
• Other ad-hoc duties as assigned by his/her immediate superior and/or manager

Job Requirements

• Must be familiar with Microsoft Word and Excel
• Must be able to work independently
• Must be able to converse in English fluently through email and phone
• Must possess a sense of urgency and responsibility in work
• Outgoing personality
• Willing to learn with good attitude
• Prior work experience in this industry is not required, but will be advantageous if have

JOB DESCRIPTION

· Liaise with customers

· Deliver services that meet customer services

· Resolve customer management conflicts

· Coordinate with suppliers / contractors

· Plan delivery of services according to customer needs

· Execute appropriate solutions to address customers queries based on sales / customer management knowledge

· Manage key accounts through maintaining contact close contact with existing clients

· Research potential sales opportunities.

· Communicate requirements and activities to stakeholders

· Other Ad-hoc duties

REQUIREMENTS

· At least 3 years’ experience in related field

· Able to multi-task and work independently without much supervision

· Willing to work overtime whenever required

*Only shortlisted candidates will be notified

• Provide Service Operations support to internal and external customers in accordance with the terms of the customer contract and Service Level Agreements (SLAs)
• Ensure the correct functioning and maintenance of all internal and external systems and products serviced by Service Operations
• When required, act as the customer SPOC and coordinate the scheduling of intervention with Customer's, internal resolver groups, and the Service Desk ensuring the highest level of customer services and communications are maintained to resolve the fault and incident within the prescribed SLA.
• Carry out incident and problem management support to the highest standards and co-ordinate the resolution with the appropriate resolver groups
• Ensure shortest restoral times possible, initiating the timely escalations to specialized resolver groups inside and outside SITA, according to the customer contracts, SLAs and monitoring requirements
• To ensure the Service Operations team adheres to the highest working standards for all incidents and problems by providing guidance, support and direct management.
• Proactively detect problems related to service and infrastructure operations and delivery services, conduct diagnostics and provide service request ownership to ensure resolution of customer problems
• Support the senior team members in the management, reporting, and coordination of day-day tasks during the absence of the Lead Engineer
• Adhere to installation guidelines and industry best practices in order to deliver quality service and infrastructure operations
• Use the appropriate tools and equipment to perform the installation, intervention, and repairs in accordance with Service Operations and Delivery guidelines and instructions where provided
• Report and escalate to the next level those problems which cannot be fixed
• Carry out preventive and proactive maintenance of equipment and monitoring of systems and services in accordance with agreed schedules and customer expectations
• Perform Change Management, Configurations, Design and Implementation of the supported Product & Systems
• Manage local suppliers in the provision of services for the SITA Service Operations centres and report on services provided to management.
• Conducts the analysis, definition, documentation and testing of application & systems enhancements
• To provide onsite support to Users during the cutover of the services
• Continuously identify and document lessons learnt, known errors and operational knowledge for improved services
• When/where required, be contactable for escalations and support, on and on-call standby basis
• When/where required, perform assigned tasks on 12 x 7 shifts basis.

Who you are

• Degree or equivalent Diploma / Certificate in Computer Science, Electronic Engineering or equivalent
• Minimum 8 years experience in the network, and/or application/system support domain.
• Must have dealt directly with external customers delivering to SLAs.
• Exposure to ITIL and IT/network components and principles
• Demonstrated maturity in handling complex customer issues and demanding customers
• Ability to coach new joiners and to facilitate their integration into the team
• Knowledge of Airline and CAA customers use of ACM applications
• Ability to organize the activity of a team and to take ownership of issues until resolution

We are looking for an Application Engineer who can find innovative and creative solutions to challenging problems. As an IoT Application Engineer, you'll evaluate the optimal design and architecture for different use cases of design and develop IoT solutions, including driving the pilot implementation. This role will also be responsible for the integration with the data platform and different application frameworks and platforms within the organization's Industry 4.0 digital solution ecosystem, as well as supporting the exploration of new technology and innovation solutions from a data communication, storage and retrieval perspective.

DESCRIPTION

• Works with the application development team and business unit process experts, as well as technology partners, to design loT and sensor solutions.
• Support the data integration solution for IT and OT technology develop by Innovation Hub.
• Ensure compliance with data management, access control, and usage with the organization's data governance policy.
• Design and implement loT, Sensors and data connectivity into an enterprise data platform.
• Support and provide technical advice for exploration of new technology, POC development of new loT, sensors and controllers development.

Qualification and Education Requirements

• Bachelor's degree in a technical discipline, with emphasis on Computer Science/Computer Engineering/ Electrical & Electronic Engineering
• A passion for Sensors, loT and data collection and signalling via loT sensors
• Min 3-5 years of relevant work experience
• Experiences loT data connectivity platform and data stream solution from loT/sensors, electronic and controller solutions. (e.g. Raspberry Pi, Arduino, industrial loT sensors, controller and PLCs)
• Experience in embedded systems and wireless SOC (e.g. BLE, Wi-Fi, Zigbee, IoT)
• Knowledge in Industrial Standard Communication Protocols such as OPC, MTConnect, ModBus, MQTT, Web Sockets, REST API etc.
• Experience with designing and building electronic modules based on some common platforms such as Arduino, Raspberry Pi, etc.
• Familiar with electronic module design, analysis and development tasks such as performing circuit analysis, understanding analogue/digital filters, designing feedback control, and working with RF
• Carry out Risk Assessment and ensure compliance with Work, Safety, and Health Regulations
• Coordinate procurement and liaison with vendors/suppliers
• To conduct thorough testing and troubleshooting to identify and resolve issues that may arise
• To collaborate with relevant stakeholders to ensure data and its security are not compromised
• To evaluate the risk of security leaks in the IoT system
• To maintain comprehensive documentation of IoT technology research, system designs, and testing procedures
• Great individual performer as well as a contributor to a team
• Strong customer management and problem-solving skills

Preferred Skills:

• Capable of demonstrating excellent analytical ability, communication, and interpersonal skills required to build relationships with team members to solve problems and resolve issues
• Experience with process analysis, design, and implementation; business and technical requirements; problem-solving
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• One of the World's largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• Perform the Manufacturing Engineering activity in Engine Overhaul/Component Repair production areas. Act as Technical Authority, assuring the initial and continuing capability of the Production method to produce conforming product and ensuring the resolution of technical issues/problems/arisings to meet business and customer requirements for safety, cost, delivery rate and leadtime (SQCD). Support integration on all Manufacturing Engineering activities across the product lifecycle and through the supply chain.
• HSE – Practice full compliance to Health, Safety & Environmental Standards and meet the expectations of the Zero Harm programme.
• Product Safety – Understand product safety risks and work on mitigation to meet the required safety levels supporting requirements of the Company’s Safety Management System.
• Quality – Practice a culture of zero defects ensuring that manufacturing processes and methods within the business are developed and deployed to support Right First methodology. Support process and product related Quality investigation, and manage NADCAP accreditation.
• Delivery – Ensure that manufacturing processes and methods of manufacture within the business and suppliers are developed and deployed to support/deliver Right First Time manufacture using SPS, DMAIC and System Engineering tools. Manage FAIR/MSA activities and Source & method change in the cell/area of accountability.
• Delivery – Review issues identified e.g. Troubleshoot Strip / Build, Balancing, Runout, In-situ repair, Component Repair processes and key equipment/toolings (ITT, VTL, BTG, Wash, FTB, CMM, etc), determine resolutions and reestablish the Standards.
• Cost – Support cell/area of accountability to meet cost targets e.g. productivity, CONQ etc.
• Standards – Deploy and sustain the SAESL Operating System Standards by working with the Cell/Area CFT, and where applicable with the suppliers. Identify opportunity to improve the Standards.
• Technical Authority – Specify Manufacturing Engineering and process requirements and make technical decisions in relation to the cell/area of accountability.
• Lean/Improvement – Identify requirements for improvements and innovations in manufacturing processes and methods of manufacture within their cell/area of accountability. Prioritise and promote launch of new projects based on business case. Drive manufacturing processes towards identified best practice.
• Deploy capability (including NPI) – Responsible for production readiness of new product manufacturing capabilities or methods of manufacture. Develop numerate, real time methods for capturing process capability, and ensure it is available and acted on within the facility/supply chain. Maintenance of Production Technical Packages (technical instructions, programmes, tooling, etc) for all parts/assembles which clearly define the manufacturing process ensuring manufacturing processes and/or methods of manufacture meets the requirements for quality, cost, delivery rate and lead time

Requirements

• Degree in Aeronautical / Manufacturing / Mechanical / Industrial Engineering discipline (Candidates with Diploma in Aeronautical / Manufacturing / Mechanical / Industrial discipline and relevant experience may be considered).
• Fresh graduates may be considered.
• Good knowledge of high bypass gas turbine engines.
• Good knowledge of material and component repair processes (e.g. Welding, Machining, Painting, Coating, etc).
• Good communication, analytical, engineering and project management skills.
• Good technical problem-solving skills (Six Sigma) and hands-on approach.

• Study and review M&E Drawings and coordinate M&E works with the consultants, sub-contractors as well as project structural & architectural colleagues team to resolve any technical, site issues and discrepancies.
• To carry out site supervision on M&E works and arrange inspection with RTO
• To supervise M&E subcon works and ensure subcontractors progress in accordance to schedule set
• Arrange all the M&E T&C works
• Ensure timely production and submission of M&E shop drawings, materials and method statement are to be approved before use
• Highlight and advise the project staff on the interfacing of M&E services and the ID works

Provide customer service in monitoring freight to ensure timely arrival, accurate and timely customs declarations for final delivery to consignee within specified / agree timeframe.

• Follow up on inbound shipments and ensure timely delivery to consignee.
• Monitor flight/vessel arrivals and ensure timely feedback on arrival information to customer
• Ensure to meet all Pharmaceutical & Healthcare requirement as per GDP/GDPMDS regulations and directives, as required.
• Ensure that discrepancy related to shipment is reported to customers and origin offices promptly
• Complete customs competency test and able to file for customs entry whenever necessary/required
• Ensure all paperwork are in proper order that meet customer profile and comply to local rules and regulations
• Ensure Key Performance Indicators on customs entries are met within customers’ requirements. Comply with Singapore Customs / Competent Authorities rules and regulations imposed as well as adhering compliance to Expeditors policy and expectations
• Achieve 100 % customer satisfaction at all times through understanding customers’ needs and handling requirements as well as ensuring 100% compliance
• Respond to customer complaint and query with a sense of urgency and provide solution or improvement plan whenever possible.
• Answer all incoming calls promptly and politely
• Develop good rapport with the customers
• Ensure all data are entered into system timely and accurately
• Ensure that freight and handling charges are billed to customers timely and accurately
• Prepare and submit reports timely whenever required
• Take up additional tasks as required to meet department’s needs

Other skills

• Good working knowledge in computer software applications including E-Mail, Excel, Word and PowerPoint
• Good interpersonal and problem-solving skills
• Good communications skills with good command in written and spoken English

Responsibilities

· Assist senior or principal engineer with solution development.

· Create Test case and work with business for User Acceptance Testing

· Participate in services and software system development and design.

· Work with IT to ensure Business As usual support for factory system.

· Work with capability acquisition team to ensure that future technology improvement aligns with Factory / Enterprise System requirement / expectation.

· Create reports and support business information requirement.

· Assist business during system roll out.

· Can drive the system and deal with routine error message.

Requirements

· Possess a Degree or Diploma in Engineering, IT or related fields

· Experience with Microsoft Power Platform development

· Experience with Microsoft Visual Studio Application development

· Excellent team player, self-motivated and self-driven to deliver result.

· Excellent analytical and problem-solving skills and project management skills

· Experience in leveraging 3rd party partners for support and/or projects.

· Knowledge on Networking and Server Architecture

· Experience with Object Oriented Design will be advantageous.

· Familiarity with Agile/Scrum methodologies

· Experience working in a high availability manufacturing services environment will be advantageous.

· Experience with Six Sigma, LEAN or other Continuous Improvement process will be advantageous.

· Fresh Grad are welcome

Job Description:

· Reports to Geotechnics Manager or Monitoring Manager;

• Maintain and implement ISO 9001, ISO 14001 & OHSAS 18001/ISO 45001 Management System effectively;
• Successful delivery of projects from difference service lines according to the quality plan and procedure;
• Assist the Project Manager in planning, coordination and execution of Soil Investigation and Instrumentation projects;
• Supervise and quality control on work delivery
• Attend meetings, write meeting minutes, method statement and liaise with project stakeholders, if required;
• Coordinate with contractors/sub-contractors on site;
• Implementation of the highest practicable standards of Health, Safety and Environmental Performance and maintenance of the Management Systems to ensure compliance with appropriate International Standards;
• Perform field work as required within the specified budget and allocated time;
• Follow business management system and corporate compliance procedure;
• Act as role model for excellence, exceptionalism, quality, responsibility, professionalism and teamwork.
• Abide to Fugro’s Values.

Requirements:

· Degree in Engineering Geology or related discipline

· Min 2 years of working experience in operational control on soil investigation and instrumentation service line

· Experience in LTA, PUB project will be an advantage

· Fresh graduate will be considered for junior role

· Strong technical knowledge in soil investigation, instrumentation and monitoring service line

· Ability to think strategically and follow through on the successful implementation of plans

· Team player and strong problem-solving skills

· Effective communication skills including verbal and written communication

· Detail oriented and strong organisational skills

· Results driven and highly motivated

· Independent and able to deliver under pressured

· Accreditation Certificate for Geologist with GeoSS membership is a must

Ensure the timely answering of customer sales queries, their bookings and follow up:

- By prioritizing the incoming quotes as per set guidelines

- By following the set guidelines in terms of price offering in order to win the quote

- By swiftly responding to customers ad hoc(spot) requests utilizing the Cargolux’s tools (LEAP)

- By offering multiple options on a quote, so that the customers always find a suitable one (price, time)

- By coordinating special cargo with the relevant stakeholders (RM, Global Logistics, …)

- By promoting Cargolux’s value added services

- By re-directing customers to Cargolux’s digital sales channels to increase the awareness and utilization of such channels

- By assisting customers to confirm the bookings via the digital channels upon potential failure of booking

- By requoting the customers if certain parameters of the initial quotation have changed

- By updating all sectors of a booking pre-flight

- By ensuring the booking is correctly performed, including the applicable Rates, SCC’s, Additional Charges etc.

- By ensuring that bookings, subject to compliance checks are processed prior to departure

- By pro-actively following up on pending offers

Cross divisional collaboration

- By building bridges with other departments to improve communication

- By holding regular meetings with Sales Management to share ideas, strategies, and customer behaviours

- By keeping close liaison with accounting to ensure proper invoicing and addressment of potential challenges

- By being a contact person for all questions regarding freight transport

- By liaising regularly with the Route Management Team concerning short-term pro-active sales, weaknesses and strengths in Cargolux’s network and providing feedback on market dynamics and requirements

Ensure Customer Service and Sales Activities

- By pro-actively contacting potential customers in case of short-noticed space availability

- By redirect received market information to the Sales Management
- By taking care of CVProduct & CVPricing requests in coordination with the relevant responsible team

- By coordination of CVProduct & CVPricing bookings with the appropriate internal departments according the agreed processes and in communication with the customer.

- By monitoring his/her and the teams work based on available/provided data and dashboards.

- By pro-actively starting 1st level escalationsl

- Planning and executing customer visits, if required and in coordination with Sales Management

Responsibilities

• Manage the conceptualization, development, validation and implementation of new repair technologies
• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling for implementing new repair processes
• Implement and deliver new repairs by designing and fabricating repair fixtures/ tooling; developing process parameters; and validating repair set-up through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Any other duties as assigned by supervisor

Requirements

• Bachelor’s Degree in Manufacturing, Material Science, Mechanical engineering or related field
• Good knowledge in component repair processes (welding, machining, painting, inspection etc)
• Possess good communication, analytical, engineering and project management skills
• Good technical problem solving skills (Six sigma), takes ownership and hands-on approach
• Familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Able to multi-task and work well under pressure as an individual/ team
• Ideally 3 years’ experience in a similar capacity in the aviation industry. Fresh graduates and experienced engineers from non-aviation industry are welcome to apply

Job Description:

• Responsible New Product Introduction (NPI) process reviews drawings and specifications.
• Submit Supplier Problem Sheet (SPS) for issues encounter drawing and specifications.
• Drafting 2D drawing for the entire incomplete drawing.
• Design the internal fixture all the process.
• Able to solve drawing issues with production team internally.
• Review Engineering Change Order (ECO) and Engineering Specs Waiver (ESW) process.
• Generate internal OMS (Operational Method Sheets) and WI (work instruction).
• Able to create PTIS (Part Technical Information Sheet) creation base on the drawings Generate internal.
• Able to read multi levels BOM.
• Create multilevel Bill of Materials (BOM) and Routing for job travellers.
• Provide assistance to Purchasing for any material or OEM buying parts related.
• Work with Customer for any design improvements.
• Hand on experience on assist assembly technicians.

Additional Information

• Experience using CAD software such as SolidWorks, AutoCAD, or Autodesk Inventor
• ERP knowledge’s Vantage and Epicor, ex...
• Familiar with ASTM spec, ASME Y14.5M-1994 & ASME Y14.38-1999 and GD&T specification.
• Knowledgeable in DOS, MS Office software such as Word processing, Excel spreadsheets, PowerPoint presentation and other software related to drawings and management system.
• Familiar with all the special process ex. Anodize, EN-plating…
• Knowledge of semiconductor and equipment assembly process.
• Familiar the semiconductors components process.
• Familiar the helium leak, hydrostatic leak test and load test.
• Time-management skills for meeting deadlines

Qualification:

• Diploma or degree with mechanical engineering
• At least 1 or 2 year semiconductor manufacturing experience or Precision Manufacturing

Job Responsibilities

• Perform and certify for routine checks and defects rectification on Boeing 787, 767 and 777 aircraft maintenance tasks.
• Inspect, troubleshoot and repair aircraft systems and/or engines.
• Solving issues related to quality and safety.
• Maintain a high level standard of airworthiness when performing inspections and maintenance.
• Inspect finished work, operation/functional tests and aircraft defect rectification.
• Sign-off all tasks performed and comply with Airworthy Release.
• Co-ordinate maintenance service with relevant maintenance service provider, where necessary.
• Report to headquarter in Tokyo on regular basis to update on maintenance process and issues.
• Manage and maintain tools & equipment store.
• Support and perform maintenance engineer duties in overseas stations, where necessary.

Requirements

• Degree in Electrical and Electronic Engineering or related professional field in aircraft maintenance from an accredited university.
• Possess aircraft maintenance license and an expert with excellent aircraft engineering and maintenance knowledge for Boeing 787, 767 and 777.
• Possess more than 25 years of airline engineering experiences in the aviation industry.
• Possess qualified certification from Japan Civil Aviation Bureau (JCAB) is highly recommended as part of civil aviation regulations requirement.
• Proficiency in Microsoft office such as Word and Excel for reporting and communication with Head office in Tokyo.
• Proficiency in English as well as Japanese for communication including writing, reading, listening and speaking so as to make coordination with Head office in Tokyo.
• Strong ability to work under pressure due to time sensitive maintenance situation.
• Pleasant personality with good interpersonal and communication skills.
• Pro-active and self-motivated individual who works well independently.

Staff Fringe Benefits includes:

• AWS & Variable Bonus.
• Medical and Hospitalisation coverage
• Concessionary travel to any destinations & discounted travel on ANA and other partner airlines

1. Responsible for arrangement/co-ordination with Japanese /Local accounts for both air/sea import/export and triangle shipments.
2. Language skill both oral/written in Japanese is essential due to communication email/report are in Japanese language.
3. To prepare sales related report, quotation, monthly billing, updating in system.
4. To act and support local staff as translator to english when receiving call from Japanese clientele.
5. To resolve customer queries, complaints or conflicts.
6. Other affairs - general support to Japanese General Manager.

Job Description:

• Responsible New Product Introduction (NPI) process reviews drawings and specifications.
• Submit Supplier Problem Sheet (SPS) for issues encounter drawing and specifications.
• Drafting 2D drawing for the entire incomplete drawing.
• Design the internal fixture all the process.
• Able to solve drawing issues with production team internally.
• Review Engineering Change Order (ECO) and Engineering Specs Waiver (ESW) process.
• Generate internal OMS (Operational Method Sheets) and WI (work instruction).
• Able to create PTIS (Part Technical Information Sheet) creation base on the drawings Generate internal.
• Able to read multi levels BOM.
• Create multilevel Bill of Materials (BOM) and Routing for job travellers.
• Provide assistance to Purchasing for any material or OEM buying parts related.
• Work with Customer for any design improvements.
• Hand on experience on assist assembly technicians.

Additional Information

• Experience using CAD software such as SolidWorks, AutoCAD, or Autodesk Inventor
• ERP knowledge’s Vantage and Epicor, ex...
• Familiar with ASTM spec, ASME Y14.5M-1994 & ASME Y14.38-1999 and GD&T specification.
• Knowledgeable in DOS, MS Office software such as Word processing, Excel spreadsheets, PowerPoint presentation and other software related to drawings and management system.
• Familiar with all the special process ex. Anodize, EN-plating…
• Knowledge of semiconductor and equipment assembly process.
• Familiar the semiconductors components process.
• Familiar the helium leak, hydrostatic leak test and load test.
• Time-management skills for meeting deadlines

Qualification:

• Diploma or degree with mechanical engineering
• At least 1 or 2 year semiconductor manufacturing experience or Precision Manufacturing

• Degree in electrical or mechanical engineering recognised by Singapor PE Board or its equivalent.
• Minimum 5 years of experience in TBM operation, repaire and maintenance.
• Ensure smooth operation of TBM.
• Coordinate with TBM manufacturer for technical issues and spare part requirements.
• Familiar with LTA MRT projects specifications and requirements.
• Applicants are required to submit their detailed CV ans state the current and expected salary.

Main Responsibilities:

* To perform all roles and responsibilities required of site supervisors under the Building Control Act.

* Ensure that the M&E works are constructed in accordance with drawings and specifications and the Building Control Act and Regulations.

* Monitor and report on the progress of works.

* Carry out inspection of M&E engineering works prior to concreting, subsequent construction work and defects rectification works.

* To carry out supervision and inspection of the works as directed by the Supervision QP, CRE, SRE, consultants or Superintending Officer.

* To manage and supervise the Resident Technical Officer under his charge.

* Ensure records of all mechanical and engineering works including records of tests, defect rectification, inspections, work progress, material and equipment on site, safety are timely updated and properly kept.

* Attending site, progress, variation, and coordination meetings.

* Verifying all reports and claims relating to M&E works submitted by the contractors.

* Liaise with all relevant authorities and stakeholders to maintain proper and updated daily records of all works done including records of tests, inspections, status of work, safety, site diary, material on site and equipment on site, labour force, day works, provisional items or provisional quantities etc.

* Keeping accurate record of variations as instructed or approved by the Superintending Officer and to maintain a set of updated drawings on site.

* Check all drawings including shop drawings, construction drawings and specifications for discrepancies and to report to the Supervision QP, consultants or Superintending Officer.

Qualifications:

* Degree/ Diploma in mechanical or electrical engineering degree recognised by the Professional Engineers Board of Singapore.

* Minimum five (5) years of relevant experience as a mechanical and electrical engineer, of which at least three (3) years shall be in supervision of works similar in nature to major construction works in buildings, services laying and &ol systems.

* Preferably with experience in the supervision of infra services laying, lighting &control systems.

At CAPE, we put talent, hard work, teamwork, and a fun workplace together to learn and grow, approach problems, and solve them creatively and collaboratively.

Join us to be part of the team!

Responsibilities

• Perform structural analysis and design works for building works and civil works.
• Supervise the drafting works related to design and coordinate for deliverables.
• Ensure all engineering works comply with relevant statutory standards, regulations, and Codes of Practice.
• Assist QP/Project Lead in managing projects, liaise with stakeholders, clients, design team, site team and other relevant parties.
• Liaise and coordinate with contractors, project team and design consultants and submission to authorities.
• Working independently in analyses, design, submissions, construction support and coordination works will be advantageous.

Requirements

• Possess a Civil and Structural Engineering degree recognized by the Professional Engineers Board of Singapore/Malaysia.
• Minimum 2 years of C&S design experience.
• With working experiences in Singapore/ Malaysia on structural engineering projects.
• Well verse with structural engineering design to local Codes, Regulations and requirements, and Eurocode.
• Well verse in structural design software, e.g. Tekla, STAAD Pro, SAFE, Prokon, Etabs, SAP 2000 etc.
• Familiar with authority submission requirements for civil-structural works.
• Experience in design/project management works in BIM.
• Conversant with statutory code and requirements for site supervision, quality control procedure and construction administration.

This position is a 3-year contract with the possibility of renewal.

We regret that only shortlisted candidates will be notified. By applying or sending your resume to us, you are consenting to the collection, use and disclosure of the submitted personally identifiable data. We collect and use personal data (including name, address, telephone number and email address) submitted by you for a variety of reasons, including for evaluating job applications, processing information requests, and internal record-keeping of our communications with you. Further information on our Personal Data Protection Policy can be found at www.cai.sg.

Client Service Specialist

The Job:

Client Service Specialist will be responsible for the review of material flow parameters and recommend appropriate levels to support business and customer requirements. And to lead new customer integration by coordinating internally with cross functional teams and externally with business partners. Assisting the Client Service Manager to manage the day-to-day inventory coordination in high volume, fast-paced healthcare distribution environment while ensuring compliance with established procedures.

Responsibilities:

• Develop and foster strong relationship with key account.
• Serve as the key liaison person between client and internal departments on request and issue resolution.
• Take ownership of key account’s new program implementation. Engage in initiative and project discussion. Lead and monitor implementation progress.
• Manage, monitor and control stockholding. Prepare stockholding and indent reports for monthly reviews.
• Support monthly KPI metrics and perform root cause analysis to improve metrics & performance, timely submission of internal and external reporting, as well as, present operational KPI.
• Manage Replenishment and inbound Inventory in line with the forecast or indent, commercial and stock holding requirements.
• Review materials forecast and execute Supply Plan, analyses Key Planning Parameters to achieve a balance between Inventory and Forecast.
• Analyse Forecast Variance and identify strategies to improve the Forecasting process to minimize the variance.
• Analyse the variance of demand and supply, pro-actively monitor the fulfillment gaps, drive investigation of root cause and recovery plan
• Establish appropriate safety stock level meeting required service levels.
• Drives continuous improvement initiatives to meet inventory goals
• Reviews slow moving items, block inventories according to Excess and Obsolescence Policy.
• Effectively use ERP system to manage high number of material SKUs.
• Review work processes and initiate process improvement plans.

Qualification:

• Degree in Business / Operations Mgmt / Supply Chain Mgmt / Industrial Engr or related discipline.
• Preferably 2 years relevant experience in key account management, logistics, warehousing, pharmaceutical or distribution industry.
• Strong analytical, problem-solving, communication and process mapping skills.
• Working knowledge of SAP system and proficient in Microsoft® Office tools and related software.
• Fresh graduates are welcome to apply.

Job Description

• Mechanical Design of Jigs & Fixtures and machine parts;
• Perform reverse engineering drawing'
• Involved all activities include designing, sourcing, installation, assembly and troubleshooting;
• Communicate with customers for design input;
• Coordinate with production floor for design related issues;
• Coordinate with sales, production and suppliers;
• Technical support on-site;
• Supporting QC inspection and assembly.

Requirement

• Degree / Diploma in Mechanical Engineering / Automation / Mechatronics or equivalent;
• Proficient in CAD software, preferably in AutoCad & SolidWorks, able to generate parts in 3D models/assemblies;
• Innovative, pro-active, energetic, can work under minimum supervision.
• Hands on experiences