Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

(Customer Interface is essence to fulfilling of functions )

• Manage and maintain existing customer accounts
• Ensure Sales Orders are fulfilled for On Time Delivery
• Work closely with various departments to drive order fulfillment towards customer satisfaction
• Manage risks/issues that might/do arise over the course of program life cycle & take measures to correct them before they occur.
• Participate in Chang Control Board (FA/PILOT/Production ECO) & NPI-Meetings
• Monitor and manage Ageing Stock inventories
  
  The Requirements:
• At least a Diploma / Degree in Engineering field.
• 2 to 5 years’ relevant experience as a Program Engineer preferably serving customers from seimconductor, medical/life science or analytical industry
• Proficient with computers and in using MS word, Excel, Power point.
• Work experience in SAP / Oracle /SUGAR CRM network preferred.
• Possess analytical and problem- solving skills, excellent oral and written communications skills for effective communication.
• Ability to multi-task in a dynamic and fast paced environment.
• Meticulous with strong project management experience.
• Customer and sales service-oriented team player to maintain and improve quality of service.

Other information:

• Working Hours : 8.15am to 5.30pm (Mon-Fri)
• Location : Changi North
• Company Bus : Pick up at Ang Mo Kio, Yishun, Hougang, Punggol, Pasir Ris, Bedok, Tampines MRT/Interchanges

Interested candidates are invited to apply online with an updated resume. Please indicate the below information in your resume:

• Education Background
• Work experience
• Current & Expected salary
• Reason(s) for leaving current/previous job
• Availability / Notice Period

We regret that only shortlisted candidates will be notified.

Thank you for applying!

Job Description

At Applied Materials, our innovations make possible the technology shaping the future. We are the leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. As a part of the hardware engineering team, you will be taking a lead in mechanical design, be the point of contact and interface to the wider product development team and work with the customers to solve challenging problems in multiple domains.

Minimum Qualifications:

• Bachelor's degree in Mechanical Engineering, or related engineering field
• 3D CAD experience – Pro-engineer, Solidworks or UG NX
• 3+ years of hands-on experience designing capital equipment

Key Qualifications:

• Semiconductor equipment design or troubleshooting experience
• Fire in the belly – can do attitude
• Proficient in simulation and analysis methods (FEA, thermal analysis and tolerance analysis)
• Strong in one of the following fields: Thermal or Compressible flow or Design or Machining & manufacturing processes
• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information
• Excellent written and verbal communication skills
• Able to craft clear engineering documentation
• Ability to form effective cross-functional relationships and to communicate product design/mechanical requirements clearly to non-experts
• Ability to prioritize and handle multiple projects simultaneously

Description:

You will own the end-to-end design, development and validation of hardware required to enable chemical vapor deposition (CVD) processes. You will work with a passionate cross-functional team to generate design concepts, and as the mechanical engineering lead you will be responsible for engineering analysis and documentation for your piece of the project:

• Identifying design tradeoffs and risks to choose best path to solution
• Identifying and performing experiments, data analysis and applying scientific methods to reduce design risk early
• Running analysis (tolerance, thermal, flow etc.) to prove designs will meet intended objectives

In the prototyping and validation phases, you will support internal and external teams in identifying, troubleshooting and resolving issues found at the component and system level and will be multidisciplinary in nature. Troubleshooting issues as customer site may involve some international travel.

At the end of every project; with your contribution; Applied Materials will be able to deliver technology that will enable our customers to develop devices for all conceivable applications, sensors, memory, logic, IoT and beyond!

Key Responsibilities

• Develops and applies quality standards in accordance with company and customer requirements. Develops and conducts related tests.
• Develops and uses procedures. Prepares documentation for inspection/ testing procedures. Recommends corrective action for procedural, product, or process deficiencies.
• Analyze operational data; Develop and implement recommendations. Participates in and may lead audits.
• Evaluates work methods, procedures and policies. Tracks progress of qualification status, reviews reliability test results, determines disposition of non-compliant products, reviews and releases qualification packs.
• Utilizes drawings, specifications, industry standards, and sketches, adapting inspection measuring devices and procedures when necessary. Read and interpret technical drawings and specification requirements.

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines.

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market.

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements.

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information.

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies.

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus.

Job Responsibilities:

• Provide excellent customer service to customers.
• Attend to all walk-in enquiries from customers.
• Handle lost-and-found enquiries.
• Handle customers phone call enquiries.
• Ensure customer enquiry are properly addressed and escalate customer complaints to related departments.
• Other ad-hoc customer service related duties as assigned.
• Adhere to workplace safety and health policies, practice safe work procedures and safety rules implemented at the workplace; and not engage in any unsafe or negligent act that may endanger self or others.

Job Requirement:

• Minimum GCE ‘O’ levels and above. Prior 1 – 2 years of working experience in customer service industry would be advantageous.
• Good verbal communication, interpersonal and written skills; with pleasant and positive attitude.
• Computer literacy including Microsoft Office will be an added advantage.
• Working location: Punggol & Pasir Ris interchange.
• Able to commit to shifts.
• 3 / 4 day shift rotation, 7.30am - 8pm.

Go-Ahead Singapore is committed to provide a healthy, safe and secure work environment to all employees. Please visit our website (www.go-aheadsingapore.com) for more details.

Pratt & Whitney is a world leader in the design, manufacture and service of aircraft engines and auxiliary power units. The company offers a well-balanced portfolio of engines for next generation fighters and commercial aircraft, and leads the industry with our game-changing PurePower® family of engines and patented Geared Turbofan™ technology. Today, we are an established aviation player in Asia Pacific, with more than 30 years of presence in the region. We manufacture engine parts including components for PurePower® engines, as well as operate businesses that provide aircraft engines and parts repair and overhaul.

Responsibilities:

• Lead and supervise repair cell; group leaders, technicians and repair specialists, to meet cell targets and goals for quality and on-time delivery.
• Assist manager in production and overtime schedules and procedures, as well as support cell leader on manpower and resources planning.
• Implement management tools to track production activities, material flow and inventory used by the cells to achieve cost, quality and delivery targets.
• Develop & maintain adequate repair process control to achieve consistent quality products.
• Track production and repair yield and quality targets set by management.
• Enhance current repair procedures & improve process robustness & output, through process improvement and standard work.
• Work with the various business functions such as Engineering, Quality, HR, ROCs and Materials to achieve department objectives and company’s goals
• Actively engage and participate in company initiatives such as Customer Oriented Results and Excellence (CORE), Technology & Automation and Lean manufacturing activities
• Support capacity ramp up initiatives through workforce hiring, planned skills training, resource scheduling and development programs.
• Assist the Department Manager in performance reviews on a regular basis in order to facilitate or maintain a high operating efficiency for the repair cells
• Develop potential talent in pipeline and champion employee development to ensure repair team stability and continuity.
• Carry out any other duties as assigned by the Department Manager

Requirements:

• Diploma in Mechanical/Aeronautical/Production Engineering with 3 years of relevant aviation experience
• Experience in aircraft engine workshop practices and maintenance & repair work process will be advantageous.
• Ability to perform basic machining on components using the Lathe, Milling, Jig Bore, EDM and Grinding machines will be advantageous.
• Ability to perform basic bench repair on components will be advantageous.
• Good working knowledge of MS Office software (Word, Excel, Access and PowerPoint)
• Analytical with strong leadership and supervisory skills
• Highly motivated with a strong drive for success
• Good team player with strong communications and interpersonal skills

Why Join Us

• We drive innovation to go beyond with a purpose to transform aviation.
• We grow our people to become leaders with talent & leadership programs.
• We offer employee scholarship program for further education.
• We care for your well-being with comprehensive health, medical & dental benefits.
• We provide island-wide company transport from major MRT stations.
• We provide structured on-the-job trainings and in-house/ external certifications.
• We value trust, safety, integrity, respect, safety, innovation and excellence.
• We provide annual wage supplement (AWS) and variable bonus plan.
• We provide shift & meal allowances (Shift work only).
• We provide overtime benefits as applicable (Shift work only).
• Our ethos is “We Succeed, Together”.

Job Description

Key Responsibilities

1. Complete definition and design of complex components, modules and sub systems. Contribute to the system engineering specification both within the field of one's expertise and broadening into other disciplines. Ensure designs meet market requirement specifications (MRS). Coordinate with project marketing and management to understand sub system requirements. Be able to chair architecture brainstorming meetings and drive the systems process to down select to a final architecture of a subsystem.
2. Conduct detailed engineering analysis of sub systems using vast knowledge of design concepts and functional requirements pertaining to field of technical expertise and broadening into other disciplines. Assist in creating concepts for architectural design approaches. Evaluate architectures to provide recommendation for best system solution approach.
3. Build and qualify prototypes of new designs, or procure entire subsystems from outsourced suppliers and test for compliance with detailed specifications
4. Problem identification and troubleshooting a variety of difficult engineering problems in field of technical expertise, including serviceability and manufacturability.
5. Support System Integration during the assembly and final testing of new product designs.
6. Perform and coordinate tests as per internal as well as industry-accepted reliability specifications. Make suitable design or operational changes as required.
7. Support system engineering projects that have a substantial mix of electrical, mechanical, physics, algorithms and software design, and understand the underlying system implications.
8. Provide remote and onsite support to field support personnel as required.

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Job:

• Deliver prompt and efficient service to order processing via call centre hotline, email, sales order
• Perform accurate and prompt entry of orders in the system
• Ensure timely and accurate processing of orders received through the order hotline and email
• Ensure that critical information with regards to urgent delivery, special timing request are communicated and followed up with the delivery section till completion of delivery
• Ensure procedures for processing of item with sales restrictions, orders that require price approval and other principal specified requirements are strictly adhered to
• Provide admin support when necessary [e.g. filing, data entry, retrieval of documents, etc
• Any other duties assigned

Requirements:

• Minimum Diploma
• Good verbal, communication and interpersonal skills
• Call centre experience preferred OR
• Experience in customer service/customer support role advantageous

Job Responsibilities

As a Piping Design Engineer (Drafting) specializing in piping projects, you will be responsible for designing, drafting, and optimizing piping systems within manufacturing facilities. You will work closely with project managers and engineers, and other stakeholders to ensure that piping designs meet regulatory requirements, safety standards, and project specifications. Your role will involve creating detailed drawings, including IFC shop drawings, conducting analysis, and coordinating with multidisciplinary teams to deliver high-quality piping solutions.

Job Requirements:

· Proficient in using CAD software, such as AutoCAD and Plant3D, Inventor, Revit

· Prepare technical drawings, including piping isometrics, 3D/BIM model

· Minimum Diploma in Mechanical Engineering

· 2 to 3 years relevant working experience piping design & drafting

· Experience in pharmaceutical piping design & drafting would be desirable

Working Location:

8 Loyang Crescent Singapore 509016 (head office)

Construction worksites around Singapore (including Tuas)

The ideal candidate is a hardworking, result-orientated and fun team player who is passionate about the travel and tourism industry, and customer service. The candidate will play a critical role in the daily operations of tours for transit passengers in Singapore.

If you are looking to seek growth and challenge yourself in the travel industry, that is only expected to get bigger & better with the recovery from the pandemic, this might just be for you!

Responsibilities:

• 12 hour shift (7am to 7pm), with break in between
• To be stationed at customer service booths at the transit terminals of Singapore Changi Airport
• Provide customer service for the booking, registration, waitlist and enquires of transit tours for passengers
• Upkeep the customer service booths and ensure they are in good working condition and cleanliness
• Maintain all equipment and logistics at the booths and ensure security of items
• Escort passengers to meeting point & liaise with tour guides for commencement of transit tours
• Attend all required trainings and updates
• Uphold a high level of customer service standard
• Manage feedback and complaints in a prompt and professional manner
• Compile daily reports to project manager and supervisor; and
• Other ad-hoc duties as assigned.

Requirements:

• Background of working in customer service role is a plus
• Team player and able to work under minimal supervision
• Excellent verbal and interpersonal skills
• Excellent group management and time management skills
• Competent computer literacy and working with basic software (e.g. Microsoft)
• Detailed oriented
• Willingness to work and continuously learn in a fast-paced environment
• Must be able to work at least 4-5 full day shifts a week as well as PH & Weekends

Job Scope:

As an IT Admin Staff your primary responsibility is to support the IT team in maintaining a smooth and efficient IT environment. You will be part of our dynamic IT team, assisting in the management and maintenance of our organization's network infrastructure. Here is a simplified breakdown of your key tasks:

1. Administrative Support:

Assist the IT Administrator/IT Manager with daily administrative tasks.

Keep track of IT inventory, including hardware and software licenses.

Help with procurement processes by reviewing vendor and preparing purchase orders and tracking deliveries.

Manage and organize IT-related documentation, such as manuals and user guides.

Assist in data entry and data cleaning.

2. User Support:

Assist with setting up user accounts and access permissions.

Aid in onboarding new employees with IT resources.

3. Maintenance and Monitoring:

Perform routine checks on IT equipment and report issues.

Assist with maintaining backups and monitoring system performance.

4. Security and Compliance:

Assist in enforcing IT security policies and practices.

Promote cybersecurity awareness among colleagues.

Follow data protection measures and user access controls.

5. Documentation and Reporting:

Keep detailed records of IT activities, incidents, and resolutions.

Assist in creating reports on IT performance and usage.

Qualifications:

• High school diploma or equivalent; IT certifications or relevant coursework a plus.
• Strong organizational skills and attention to detail.
• Basic knowledge of computer hardware, software, and operating systems.
• Good communication and teamwork skills.
• Willingness to learn and adapt to new technologies and processes.

Responsibilities:

• Maintain of machinery & facility maintenance records for traceability needs
• Maintaining of air conditioning, electric power, plumbing and lighting system, cleaning, decoration, grounds, building keeping and security of building surroundings.
• Responsible in overseeing all aspects of safety to ensure compliance to the Workplace and Health Act and other safety related statutory legislations.
• Conducting audits in facilities on relevant risks and support and work with facilities to mitigate these risks.
• Maintaining comprehensive records and reports on safety and environment management activities.
• Monitor and escort external sub-contractors in carrying out repair and maintenance works within Company’s premises
• To react actively in recovery of daily machineries & accessories breakdown (To be efficient with least MB downtime)
• To provide support in daily mechanical, electrical or air-conditioning preventive maintenance works inclusive of building maintenance
• Plan, schedule and perform of preventive maintenance program on machinery & facility (Compressor, cooling tower, air-condition, etc)
• Attend to all break downs or complaints promptly and to perform investigation and rectification works
• Ensure all works are carried out safely and in accordance
• Work closely with purchaser to be cost efficient for repair and maintenance tasks

Requirements:

• Possess at least a Professional Certificate/NiTEC, Engineering (Industrial), Engineering (Metal Fabrication/ Tool & Die/ Welding), Engineering (Mechatronic/ Electromechanical) or equivalent;
• Min. 2 years of relevant working experience preferred;
• Candidates holding an Electrician’s license and prior relevant working experience in medical molds industry will be an added advantage.

Responsibilities

1. Providing product information: A customer service representative may answer customer inquiries about DG Packaging Pte Ltd's products, such as the different types of packaging solutions available for dangerous goods and their specifications.
2. Offering guidance on regulations: Providing information on the regulatory requirements for dangerous goods packaging, such as the standards set by the International Air Transport Association (IATA)
3. Assisting with orders: Helping customers with regards to packaging solutions and provide updates on the status of their orders.
4. Addressing customer concerns: Handling customer complaints and concerns related to DG Packaging Pte Ltd's products, delivery, or customer service.
5. Coordinating with other teams: Work closely with DG Packaging Pte Ltd's sales, production, and logistics teams to ensure that customer orders are processed and delivered in a timely and accurate manner.
6. Ensuring customer satisfaction: Ultimately, a customer service representative at DG Packaging Pte Ltd is responsible for ensuring that customers are satisfied with the company's products and services and that their dangerous goods are properly packaged and transported in compliance with regulations.

Requirements

1. Education and experience: Experience in customer service, sales, or logistics.
2. Communication skills: Excellent communication skills, both written and verbal, are essential for a customer service role. The ability to communicate clearly and effectively with customers, as well as with other teams within the company, is crucial.
3. Attention to detail: Attention to detail is critical in a customer service role, as customer orders must be processed accurately and in compliance with regulations. A customer service representative must also be able to quickly identify and resolve any issues or errors.
4. Interpersonal skills: A customer service representative must be able to work well with others and maintain a positive attitude, even when dealing with difficult customers or challenging situations. The ability to work collaboratively with other teams within the company is also important.
5. Technology skills: Proficiency in Microsoft Office and other relevant technology platforms may be required for a customer service role at DG Packaging Pte Ltd.

Benefits:

1. Additional 2 days leave
2. Medical, dental and spectacles benefit
3. Hp Claims
4. Birthday voucher
5. Long Service Award
6. Free trainings on IATA course

• Work on electrical/electronic system for product design, design verification and validation activities.
• Participate in solving electronics and software/firmware related problems.
• Generate product documentation such as specifications, risk assessment, test protocols and reports that contribute to the Design History File.
• Involve in design review to ensure the product is designed for testability and manufacturability.
• Develop test fixtures/jigs and test program with R&D and manufacturing teams.
• Provide engineering support for manufacturing and test systems in production.
• Work closely with a multidisciplinary team on design verification, manufacturability, quality and reliability.
• Provide technical ownership for product design aspects for developmental and commercial products throughout their entire lifecycle.
• Resolve technical problems by working closely with internal and external stakeholders.
• Propose solutions for technical problems using systematic problem-solving methodologies and engineering principles.
• Follow Design Control for medical devices to ensure compliance with the company’s Quality Management System and ISO 13485.

Education

· Min Degree in Electronic Engineering or related field.

Experience

· Preferably to have minimum of 3 years professional experience working on electrical/electronic product development and related activities.

· Working experience in product design, design Verification and debugging.

· Candidates with more relevant work experience or expertise might be considered for a senior level position.

· Strong understand of product testing, troubleshooting and test fixture development.

· Experience with electronics hardware design, review, verification and troubleshooting.

· Experience in testing electrical and electronic systems, PCBAs and hand-on experience in configuring equipment (oscilloscope, spectrum analyzer, safety tester, etc.) is a plus.

· Experience with PCB design software (e.g., PADS, Altium Designer) is preferred.

· Experience with EMC and safety regulatory certifications is a plus.

· Experience with IEC60601/IEC61010 is a plus.

Skills

· Good knowledge in power, microprocessor, PCBA, high speed signals designs.

· Strong knowledge of technical standards related to video and electrical safety.

· Outstanding communicator with strong troubleshooting skills.

· Excellent documentation writing skills.

Key Responsibilities

1. Understand, research, and resolve internal and external application and systems issues.
2. Create, test, and verify installation/upgrade instructions for Applied Materials’ product releases.
3. Participate in product testing, documentation reviews, and user conferences.
4. Provide off-hours customer support via pager and cellular telephone as scheduled. Provide telephone coverage as scheduled.
5. Attend Applied Materials’ classes in designated product line and external classes for third-party software.
6. Provide on-going training to customers for technical and systems issues.
7. Deliver updates and reports to managers, partners and peers

Functional Knowledge

• Demonstrates conceptual knowledge of theories, practices and procedures within a discipline

Business Expertise

• Applies general knowledge of business developed through education or past experience

Leadership

• No supervisory responsibilities; accountable for developing technical contribution

Problem Solving

• Uses existing procedures to solve standard problems; analyzes information and standard practices to make judgments

Impact

• Has limited impact on own work team; works within standardized procedures and practices to achieve objectives and meet deadlines

Interpersonal Skills

• Exchanges straightforward information, asks questions and checks for understanding

Key Roles and Responsibilities

· · Software development and coding - write, modify, and debug software for various applications.

· Update and maintain existing software applications to address evolving user requirements, resolve bugs, and enhance performance.

· Perform software unit test based on white box testing, integration and system test based on black box testing.

· Develops and implements software testing protocols to validate product quality and functionality.

· Supports the development, modification, and execution of software test plans.

· Maintains design specification and technical documentation during Product Life Cycle

· Support Software hazard analysis, FMEA and risk analysis for any software design changes.

· Perform other ad-hoc duties as assigned by immediate supervisor.

Requirements

Education

· Min Degree in Computer Science, Engineering, or other related technical degree.

Experience

· Proficiency in one or more programming languages relevant to the job (e.g., C++,Java, Python).

· Familiarity with the principles of IEC 62304

· Familiarity with version control systems, such as Git

· Proficiency in various testing techniques, including manual testing, automated testing, regression testing, and performance testing.

Familiarity with FPGA development tools would be advantageous

Skills

· Strong understanding of software development principles, practices, and methodologies.

· Knowledge of software design patterns, architectural principles, and system design.

· Proficient coding skills and experience in debugging and troubleshooting.

· Ability to develop test plans, test cases, and testing strategies based on software requirements and specifications.

· Strong communication skills and the ability to work effectively in a team environment.

Awareness of and adherence to security best practices in software development.

Job Description

Key Responsibilities

• Develops code and documentation for a variety of difficult software projects, and design and implement bug fixes.
• Designs a variety of difficult software projects.
• Defines software specifications.
• Interfaces with internal customers for requirements analysis and schedule.
• Troubleshoots a variety of difficult software problems.
• Performs software tests on code and enhancements.
• Interfaces with external customers regarding software issues.
• Compiles data for regularly scheduled or special reports, analysis and statements.

Requirements

• Bachelor's degree in Computer Engineering, Software Engineering, Computer Science or equivalent
• Have experience in C++, C#, Python and object-oriented programming
• Expected in business travel
• Vision algorithm, machine language and automation skill preferred
• Ability to speak Mandarin would be an additional advantage in order to liaise with Chinese-speaking counterparts

Job Description

Key Responsibilities

• Design, collect data, analyze and compile reports on a variety of difficult CVD process engineering experiments, within safety guidelines
• Perform CVD hardware characterization on a variety of difficult systems, within safety guidelines
• Troubleshoot a variety of complex problems, perform Root Cause Analysis and resolve a variety of difficult process engineering issues
• Generate internal and external documentation for products, presentations and technical reports
• Interact with customers to resolve a variety of difficult process engineering issues/problems with limited supervision
• Measure film properties and interpret data
• Identify, select and work with vendors and suppliers with limited supervision
• Implement new technology, products and analytical instrumentation

Requirements:

• PhD/ Master Degree in relevant Engineering/ Science/ Physics studies
• At least 5 years of relevant working experiences in semiconductor process development
• Prior experience with CVD technology is highly desirable
• Ability to work in cleanroom/ lab environment
• Resourceful, meticulous and problem-solving attitude

Working location: Changi Cargo Agent Building

Client Communication: Communicate with clients via phone or email to provide updates on shipments, and resolve issues related to transportation and delivery.

Order Processing: Ensuring all necessary documentation is completed and submitted. This includes verifying and arranging transportation, and scheduling deliveries.

Problem Resolution: Proactively identify and resolve issues that may arise during transportation and delivery, such as delays, damages, or discrepancies. Work closely with drivers and warehouse personnel.

Tracking and Monitoring: Monitor the status of shipments and track their movement from origin to destination. Keep clients informed of any changes or delays and provide real-time updates as needed.

Documentation: Maintain accurate records of all transactions, including order details and shipping documents.

Service Technician required to work on a wide range of NOV Manufactured equipment including Pressure Control Equipment. Zoned certified Diesel engines and Winch units. Must be able to read technical drawings and follow detailed engineering procedures.

Job Description

• Familiar with the standard products of the Company and be fully conversant with the assembly drawings and Bill of materials
• Ensure products are assembled in accordance with approved drawings and specifications
• Complete all service-related documentations, including service reports, work orders & assembly data sheets
• Proficient in using all components, equipment, tools and techniques used in the workshop
• Reporting observation of any mistakes, omissions or alterations necessary to drawings or bills of materials

Job Requirement:

• Preferably 2 years working experience in a workshop environment or with servicing of oilfield equipment.
• At least 2 years' Mechanical experience on diesel engines and pressure testing
• Ability to read complex engineering drawing
• Proficient in the use of small tools
• Computer literate and competent with Microsoft Office
• Diploma or minimum Higher NTEC or NTC2 or 3
• Candidate requires to travel for onsite field work at customer locations and offshore installations

Job Description

• Assist to prepare transshipment documentations
• Reporting and data entry
• Coordinate all shipping requirements in respect to transshipments
• Prepare and check through t/s documentation
• Attend to customer’s inquiries pertaining to rates and assist in queries/bookings/followups/complaints
• Track shipments and updates
• Manage and follow-up on any discrepancies
• Any other duties as assigned by the Management

Requirements

• GCE ‘N’/’O’ level/Diploma or equivalent
• 1 year of related experience, preferably in Freight Forwarding/Transportation/Logistics industry. Fresh school leavers with the right aptitude are welcomed to apply
• Proficient in MS-Office applications
• Prior experience with Cargowise system not essential but would be a bonus
• Proficient in Basic English
• Organised and meticulous
• Great sense of responsibilities and commitment
• Comfortable and able to liaise with Chinese speaking customers in the Asia regions
• Willing to learn
• Good team player

Benefits:

• Transport allowance
• Annual leave 16 days for the first year. additional 1 day per year of service.
• 13th month AWS + corporate bonus
• Medical + dental + optical benefits