Position Overview:

The Principal Electronics Engineer is a senior leadership role within EOS Defence Systems (EOS DS) and is responsible for solving problems using disciplined engineering techniques (e.g., software, mechanical, electronics, system, testing, project etc) to assure and advise on the development and/or delivery of products. The Principal Electronics Engineer possess deep technical and industry knowledge with the ability to influence and guide company direction, ensuring strategic alignment. The Principal Electronics Engineer is also responsible for developing products and designs that support the product development and product goals of EOS DS.

The Principal Electronics Engineer will lead and mentor engineers, up to and including Senior Engineers. They may provide technical assistance to multiple teams and provide a high level of support to those teams. In consultation with senior leadership, suggest staffing and workflow priorities and monitor and manage performance, health and wellbeing.

The Principal Electronics Engineer will have extensive engineering experience across the product lifecycle in a Defence environment, allowing them to provide leadership across engineering teams and execute technical authority as allocated.

Primary Duties:

Specific Functions & Tasks

• Provide necessary guidance and direction to produce electronics designs and analysis that satisfy defined product development requirements in the specified time frames and exercise allocated technical authority.
• Work with systems engineers to ensure all requirements are identified, captured and analysed.
• Lead conceptual design and schematic capture of complex electronic circuits.
• Ensure test and evaluation activities on electronics and system designs are undertaken to verify and sign-off of all design requirements.
• Initiate and/or participate in planning on electronics designs.
• Develop, review and champion the electronics engineering process within EOS DS.
• Ensure the preparation and review of all documentation to support designs.
• Perform conceptual, preliminary and detailed design of complex electronics assemblies.
• Simulate analogue and digital circuits.
• Document designs including calculations, design options and decisions.
• Prepare for and contribute to design reviews.
• Perform test, evaluation, characterisation, verification & validation of electronic subsystems in collaboration with test engineers.
• Prototype electronic circuits, wiring harnesses and other systems.
• Work closely with other engineering disciplines to ensure cohesive and complete electronic designs are delivered on time and on budget and meet project requirements.
• Apply DFx principles (manufacturability, testability, excellence).
• Review work and provide guidance and mentorship to Senior Electronics Engineers.
• Engage key stakeholders and subject matter experts across technical engineering and specialty areas to understand the concept of operations and user needs to elicit and decompose electrical requirements.
• Adhere to and ensure understanding and compliance with company procedures to achieve a safe and secure work environment.
• Other duties as required.

Strategy and Architecture

• Contribute to and influence strategy for emerging, new, and current technologies, products, services within Defence Systems and have authority over and accountable for the innovation and delivery practices required to assure the implementation of this strategy.
• Assess and ensure a high level of leadership and deep industry, defence system knowledge and systems engineering best practice to maintain competitive advantage, exploit EOS DS technologies and minimise exposure and risk.
• Communicate, advocate and influence persuasively through effective negotiation and communication while fostering an environment of innovation, learning and continuous improvement within and outside the organisation.

Development and implementation of Engineering

• Self-initiated and managed under broad direction and governance to be responsible for demonstrably leading self and others to produce designs and products that satisfy defined requirements in the specified time frames and meet group objectives.
• Undertake cohesive best practice designs and analysis and develop efficient work practices to support product development activities and business outcomes.
• Lead and work collaboratively with engineers across functional teams to solve complex problems as a team and ensure all requirements are identified, captured, and analysed such that the design/product can be developed that satisfies the safety, quality, policy, legislative and design authority requirements.
• Undertake clear and pragmatic tests, evaluation, and verification activities on integrated system designs and prototypes to verify and provide recommendations for sign-off of all design/product requirements to the Chief Engineer and Design Authorities based on relevant legislative requirements, standards, and contracts.
• Prepare and review all documentation required to support designs and provide tailored advice and recommendations to teams and decision makers.

Relationship and engagement

• Actively listen, share knowledge and experience, provide guidance and mentorship, and work collaboratively to mobilise teams across engineering and other relevant internal and external customers to deliver engineering and business outcomes.
• Work with Production Engineers and Technicians to ensure the best design solutions are delivered to solve production problems and obtain business outcomes under the broad direction of the Chief Engineer.
• Support the leadership alongside with the EOS Executive, Project Managers, and Project Engineers to ensure design solutions are delivered on time and on budget and meet other project management requirements.
• Communicate insights and provide thorough engineering judgement for progress and the advancement of engineering solutions.
• Apply interdisciplinary, collaborative approach to requirements including analysis of functional and non-functional requirements and functional performance specifications to develop effective solutions.

Delivery and operation

• Guide the design and execution of user acceptance testing and other verification activities to provide recommendations to the Chief Engineer and other Design Authorities.
• Support production and review manufacturing and supplier requirements to meet specified timeframes, engineering standards, and business outcomes.

People and skills

Work in cross functional multidisciplinary teams to enable self and others to solve engineering problems and implement solutions.

Key Attributes:

• Ethical Leader.
• Influencer.
• Deep Technical knowledge.
• Problem solver.
• Engineering judgement.
• Details oriented.
• Works Collaboratively.
• Insightful.
• Communicates well.
• Inventive.
• Solution orientated.
• Team builder
• Uses experience for sound judgement

Cyber Security Engineer Job description

- To implement and deploy solutions like SIEM, EDR, and NMS:

o Splunk

o QRadar

o Carbon Black EDR

o SolarWinds NMS

o Other new onboarded products or solutions

- To manage and work/liaise with product vendors, partners, and customers in terms of schedule, expectation, and requirements

- To be able to research and stage test environment for project preparation

- To provide consistent and clear communication to external and internal stakeholders

- To provide informal training to partners and customers

Requirements:

- Diploma/Degree in Computer Engineering, Computer Science, Information Systems or equivalent

- Minimum 2 years of relevant work experience in IT security implementation and deployment

- Minimum 1 year of relevant work experience with relevant product deployment

- Good understanding of operating system technology, such as Unix, Linux, and Windows Server

- Good networking & scripting knowledge

- Technically inclined and hands-on

- Good interpersonal skills, independent, proactive and a team player

- Good communication, presentation, and writing skills

- Able to work independently

- Preferably from a System-Integrator or Distributor background

Job Description

• Undertake detailed design in one or more of the following field of expertise: Civil (drainage, sewage), Bridge/Tunnel, Underground Excavation and Tunnelling works
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Analysis on structural components using various engineering software

Requirements

• Degree in Civil and Structural Engineering or its equivalent
• Prefer degree recognized by the Professional Engineers Board of Singapore for Associate level
• Minimum 5 years relevant experience
• Good exposure in the analysis and design of geotechnical works, concrete structures, steel structures, civil works, or soil-structure interactions
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

Job Responsibilities:

• Handling MEMS modules development related project independently.
• Host regular PRS review meeting with project owners of TD integration and Fab module engineers.
• Provide robust recipe to TD PI for new process developing
• Co work with fab module engineers to provide solutions for projects
• Provide risk assessments for new developing projects.
• Continuous improvement

Job Requirements:

• Bachelor degree in any Engineering discipline
• At least 3 years' experience from Etch/Diffusion/Thin Film/Photo process engineer
• Integration experience is a plus
• Capable of using DPE, 7 QC tools, FMEA, SPC, 3L5W, 8D

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in CVD equipment tools
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in CMP equipment tools
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

(a) Responsibilities:

The candidate is responsible for the end-to-end testing activities of an integrated e-payment system. The primary responsibilities would include carrying out the activities in the testing lifecycle including the test

planning, and analyzing business and system requirements.

The candidate will also be responsible for:

• Preparing the test environment, designing, and developing the test cases.

• Preparing the test environment, and executing the test procedures.

• Automating the test solution based on the system design using scripting or programming languages as well as performance tuning.

• Create traceability to requirements, analyze gaps and address them.

• Logging and tracking defects to closure

• Conducting test reviews with internal and external stakeholders.

• Perform root cause analysis for production and user acceptance defects, and address test gaps to ensure test efficiency.

• Develop design documents and user manuals that would effectively describe and provide clear instructions on the test automation solution to the end users including testers and stakeholders.

(b) Qualifications & Requirements:

• Tertiary qualification in Information Technology or Engineering

• At least 3 years’ relevant experience in executing testing and

developing test automation solutions involving devices (UI-based

or embedded) and/or back-office systems with familiarity on the full

system development lifecycle from requirement, development, to

testing and deployment;

• Good written and verbal communication skills;

• Able to work well both independently as well as in a team;

• Certification in software testing preferred;

• Experience in micropayments Fare Collection systems using Smart Cards and in diverse test execution phases (System Integration Testing, User Acceptance Testing, Performance testing) would be an advantage;

Job Responsibilities:

• Responsible for the architecture design and construction of the backend for social products and participating in technical planning.
• Responsible for the design of system software architecture, system modules, key components, and interfaces.
• Participate in writing core code, conduct project code reviews, continuously optimize code, and assist in resolving complex bugs.
• Adjust algorithm configurations in real-time based on business requirements.
• Participate in technical architecture reviews, ensuring high-quality technical designs.
• Guide, coordinate, and resolve technical issues that arise during the development process.

Job Requirements:

• Bachelor’s degree or above, majors in Computer Science, Software Engineering, or related fields.
• Minimum 5 years of experience in internet research and development, with experience in designing large-scale application systems. Experience in social product development is preferred.
• Proficient in microservices architecture and distributed architecture design, with experience in system development and optimization for high traffic, high availability, high fault tolerance, and high-load environments.
• Solid backend development skills, proficient in Java, with in-depth understanding and practical experience in data handling, performance optimization, concurrency, online system maintenance, and horizontal scaling.
• Familiar with Spring Cloud, Zookeeper, Redis, Kafka, Elasticsearch, and underlying architectures, including principles, cluster deployment, parameter optimization, and secondary development capabilities.
• Familiarity with recommendation technologies, algorithm engineering, and real-time estimation techniques is a plus.
• Strong communication, team collaboration, and project management skills, with the ability to work under pressure.
• A foundation in data analysis and a willingness to learn deeply, coupled with strong business acumen.
• Fluency in both English and Chinese for professional use.

Job Responsibilities:

• Responsible for the design, deployment, maintenance, and optimization of database systems, including installation, configuration, backup, and recovery.
• Monitor and optimize database performance to improve response speed and stability.
• Plan and expand database capacity to ensure scalability.
• Create and configure cloud servers, networks, storage, and other infrastructure on AWS to ensure a stable and reliable environment.
• Set up and manage monitoring tools to track AWS environment performance and operational status, proactively identifying and resolving potential issues to enhance system performance and reliability.
• Familiar with various AWS services and features, capable of selecting and configuring appropriate services based on business requirements.

Job Requirements:

• Bachelor's degree or higher in Computer Science, Software Engineering, or related fields.
• Minimum 3 years of database management experience, with familiarity with mainstream database systems such as Oracle, MySQL, and SQL Server.
• Proficient in database installation, configuration, maintenance, performance tuning, and troubleshooting.
• Solid knowledge of cloud computing and networking, with expertise in AWS services and architecture; previous experience managing AWS environments is required.
• Strong communication, team collaboration, and project management skills, with the ability to work under pressure.
• A foundation in data analysis and a willingness to learn deeply, coupled with strong business acumen.
• Fluency in both English and Chinese for professional use.

Project Overview

SMART M3S is undertaking a project that includes three key work streams:

1) Content: Developing an ontology encompassing various activities, actors, and processes arranged systematically. This involves:

• Extracting content from databases like the Department of Labor's O*Net.
• Human Curation and editing.
• Utilizing Large Language Models(LLMs) for content generation.
• Applying machine learning and statistical techniques to identify clusters of similar activities.

2) Software Tools: Creating a suite of software tools to :

• Browse, edit, and search the online knowledge base.
• Extract content from diverse sources.
• Facilitate human review.
• Integrate LLMs for content generation.
• Support applications demonstrating the ontology's usefulness.

3) Applications: Developing proof-of-concept applications by the end of the one-year project to showcase the ontology's utility. Potential areas include:

• Rapid identification of use cases for generative AI tools.
• Automated generation of detailed workflows and task assignments.
• Stimulating human creativity to address business and societal challenges like climate change and democratic processes.

Responsibilities

The Full Stack Developer will perform the following:

• Design, develop and maintain software tools essential for creating and managing the ontology and its applications.
• Work closely with a multidisciplinary team of researchers, developers, and content specialists.
• Integrate Large Language Models into software applications to enhance functionality.
• Optimize existing codebases for performance and scalability.
• Conduct code reviews, write unit tests, and ensure software reliability.

Requirements

• Bachelor's Degree with proven experience and a strong portfolio
• Deep knowledge and hands-on experience with the following technologies:

1) Frontend:

• Next.js
• TypeScript
• MUI (Material-UI)
• D3.js

2) Backend:

• Node.js
• Firebase and Firebase Cloud Firestore

3) Testing:

• Jest
• Cypress
• Proficiency in LLM Prompt Engineering.
• Excellent analytical and problem-solving skills.
• Ability to work independently and collaboratively in a team environment.
• Strong verbal and written communication skills.

_________________________________________________________________

Applicants are required to complete the following as part of the screening process:

1) Clone and Optimize

-Clone this code sandbox (https://codesandbox.io/p/sandbox/react-usestate-update-nested-in-another-usestate-functional-update-r4lwq0?file=%2Fsrc%2FApp.js)

-Optimize the code for performance and readability.

2) Submit Solution:

-Provide the URL to your optimized solution.

-Include a detailed description of the optimizations made and the reasoning behind them.

GitHub Respository: Link to your GitHub profile showcasing relevant projects.

To apply, please visit our website at: https://portal.smart.mit.edu/careers/career-opportunities

Interested applicants are invited to send in their full CV/resume, cover letter and list of three references (to include reference names and contact information). We regret that only shortlisted candidates will be notified

What you will do:

The Systems Applications Engineer, National Accounts will Provides sales support to the engineering and sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Oversee the application engineering team, providing configuration, enhancement, and support for technical documentation and presentations to clients.
• Customize and introduce new features to Metasys software and in-house developed applications based on end-user requirements.
• Design and construct new applications tailored to meet customer specifications and needs.
• Guide application engineers in writing and executing tests on complex programming, troubleshooting issues as they arise, and supporting product launches.
• Provide technical support and troubleshoot application issues while performing tests on complex programming and assisting in product launches.
• Assist the application manager in process improvements to enhance productivity and efficiency.
• Collaborate with system integrators (SI) to monitor their performance with quality assurance/quality control checks and ensure completion sign-off.
• Manage vendor relationships, including scoping application services and reviewing deliverables.
• Collaborate as part of a design, engineering, and operations team.
• Knowledge of ACMV and controls associated with Johnson Controls Metasys will be advantageous.
• Deliver customer support by responding to technical queries with detailed analyses of building management systems, tooling costs, and design/process improvements to meet all customer needs.
• Collaborate with engineering, sales, and operations teams to understand standard fabrication techniques, composite materials, and customer demands to develop design details.
• Create and present technical engineering information based on customer proposals, including 3D representations of products and tooling.
• Prepare cost estimates by analyzing blueprints, customer documents, and consulting with engineers and technical personnel.
• Conduct conceptual designs of composite components and assemblies to support proposals.
• Generate accurate CAD models of components and assemblies.
• Develop detailed bills of materials for proposals.

What we look for:

• Bachelor's Degree in Engineering with a minimum of 5 years of relevant experience in Access, Intrusion, and Video Management systems
• Demonstrate strong verbal and written communication skills, including the ability to efficiently articulate technical subject matter
• Good communication skills, with an ability to express and understand complex technical concepts.
• Experience of working with globally distributed teams & matrixed environment

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The job holders are to work with PI and the research team to conduct research characterizing airborne pollutants in urban environment.

Qualifications

One or more of (but not limited to) the following:

• Experience in applying data analytics, machine learning and handling big data
• Experience in applying Pythons functions of matplotlib, and numPy, pandas, statsmodels
• Fast learner - capable of conducting independent research and proficient literature search, review & summary with strong background in Chemical Engineering / Chemistry / Physics
• Experience in operating instruments measuring physical and/or chemical properties of airborne pollutants
• Proactive in assisting and contributing to quality scientific research publications
• Proficient in technical presentation, slide making, report writing, etc.
• Proven rounded and effective team player with strong initiative and ownership of the research project

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]

Overall Summary:

Mainly supporting security aspect like firewall checkpoint, security appliances - configuration, troubleshooting, capacity planning. Supporting current operation and deployment of resiliency project. This is a 2-year direct contract position.

Roles and Responsibilities:

• Directly reporting to Security Senior Manager
• Assist Architect team on new infrastructure design, implementation, and management of network solutions that form the core infrastructure, ensuring seamless integration across different platforms. This includes procurement of necessary equipment.
• To provide comprehensive product knowledge on the data technology required to deliver, support the networks infrastructure.
• Collaborate with the team to identify network and system needs, monitor performance metrics, troubleshoot, and resolve network-related issues, and implement improvements.
• Deliver project management for network activities encompassing upgrades, deployments, and migrations. Provide technical guidance and user support as required.
• Develop, maintain, and update documentation covering the network environment and operational procedures.
• Generate reports and detailed documentation outlining findings, implemented solutions, and recommendations for further enhancements.
• Oversee network environment to maximize performance, scalability, and minimize downtime.
• Closely coordinate and conform to Change Management policies, process, and procedures on any network changes.
• To implement approved changes, troubleshoot to identify root causes and implement effective solutions.
• Experience on Automating daily network tasks using scripting.
• Be available to provide on-call support as needed.

Qualifications/ Requirements:

• Minimum Bachelor in Computer Engineering or equivalent
• Must equipped with CCNP or CCIE
• Network Infrastructure & Hardware: 5+ years experience managing large enterprise network with a strong focus on F5, Palo Alto, Cisco, and CheckPoint Technology.
• Network Devices: In-depth knowledge and proficiency with switches, firewalls, load balancers, routers, and ISE.
• Network Design & Troubleshooting: Expertise in designing, monitoring, and network & incident management (LAN, WAN, VPN).
• Strong experience with automation tools: Ansible, Python - Automate in operation / project work before
• Experience with Deployment and automation, advantage to have experience building data center
• Proven track record of success in a fast-paced IT environment.
• Excellent communication and interpersonal skills, allowing you to effectively collaborate with both technical and non-technical stakeholders.
• Ability to work under pressure and delivery the project on time with minimum supervision.
• Certified and experienced with the mentioned technologies.

Responsibilities:

· Participate in feature definitions of the leading-edge AI chips

· Lead and participate the microarchitecture design of AI chip SoC and the subsystems

· Lead and participate in the front-end design and the implementation using HDLs

· Perform critical analysis and propose novel chip architectures for performance, power, and area improvement

· Cross-team collaboration with Software, DV, and Physical Design to meet performance, power, and area goals

· Write patents

Qualification:

· Bachelor degree and above in Electrical & Electronic Engineering, Computer Science or equivalent

· Experience in computer architecture, such as AI Accelerator, CPU, network-on-chip, memory hierarchy

· Experience in hardware module development using HDLs

· Experience with Logic Synthesis, Linting, CDC and DFT tools is preferred

· Good understanding of RTL verification flow and environments (e.g., UVM, VIP) is preferred

· Strong learning capability, good communication and collaboration skills

· Mid-senior to senior level positions are available

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Chemical and Biomolecular Engineering, National University of Singapore, is inviting applications for 1 Research Engineer (RE) position under Associate Professor Sibudjing Kawi’s group. The candidate will work on A*STAR LCERFI research project entitled “Methane Pyrolysis for Hydrogen and Carbon Nanotube Production via Novel Catalytic Membrane Reactor System”.

Qualifications

Master degree in chemistry/chemical engineering in the area of catalysts, inorganic membranes and inorganic membrane reactors for high temperature reactions.

• Proven experience (with good research track record in terms of publications and/or patents) in the field of inorganic hollow fiber membrane synthesis, catalyst synthesis/characterization/testing for hydrocarbon pyrolysis and catalytic membrane reactor design.
• Strong team player skills and the ability to work harmoniously with a diverse workforce.

Responsibilities

• Responsible for the quality management of machined products to ensure that product quality
• Ensuring that our internal management systems are well defined and relevant in meeting international standards and customer requirements.
• Lead and monitor the QMS incl. ISO9001 & ISO 14001 quality system certification and promote continuous improvement.
• Lead the quality team to implement quality inspection and control and manage non-conforming products.
• Participate in supplier evaluation and management to ensure the quality of raw materials and purchased parts.

Requirement

• Minimum Bachelor Degree in Mechanical or Industrial Engineering
• At least 3 years of quality management experience in the machining industry
• Proficient in using office software and mintab statistical analysis software, and possessing Six Sigma quality management knowledge and skills, e.g. SPC tools & 8D reports.
• Strong knowledge and experience in leading ISO9001 & ISO 14001 quality system certification.
• Proficiency in English and Chinese, with the ability to communicate effectively with stakeholders in China.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are seeking a Research Engineer to join our research team to work on related Soft Robotics.

Key Responsibilities:

To design, build and test whole hybrid robot systems for specific scenarios.

Qualifications

• Possess a bachelor’s degree in biomedical engineering or related field.
• Have relevant experience with hybrid robot system development and evaluation.
• Have good knowledge of soft robot actuator/sensor/integration fabrication.
• Good written and spoken communication skills and the ability to collaborate effectively in a team environment.
• Open to fixed-term contract.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are seeking a Research Engineer to join our research team to work on related Soft Robotics.

Key Responsibilities:
To design, build and test whole hybrid robot systems for specific scenarios.

Qualifications

• Possess a bachelor’s degree in biomedical engineering or related field.
• Have relevant experience with hybrid robot system development and evaluation.
• Have good knowledge of soft robot actuator/sensor/integration fabrication.
• Good written and spoken communication skills and the ability to collaborate effectively in a team environment.
• Open to fixed-term contract.

Responsibilities:

• Handles the technical aspects of patch deployment and system updates.
• Ensures that patches are tested, scheduled, and deployed with minimal disruption to system availability.
• Responsible for testing patches in a controlled environment before deploying them to production systems.
• Verify that patches do not introduce new issues or conflicts.
• Regular scanning and analysis.
• Scheduled and controlled patch deployment.
• Perform risk-based prioritization.
• Rigorous testing in a controlled environment.
• Collaborate with customer’s IT team for user acceptance testing.
• Emergency response for critical vulnerabilities.
• Understand the customer’s infrastructure and become familiar with the Customer’s infrastructure environment and support processes and procedures to ensure supporting customer with proper SLAs.
• Troubleshoot production issues to fix any user related issues and work with principal vendors and customer to provide the resolution within the proposed timelines.
• Be available for customers’ questions in assisting their needs to support any issues and monitor customer’s environment leveraging appropriate monitoring tools as well for special scheduled activities performed during non-business hours or public holidays due to system upgrades.

The Individual and their Experience:

• Linux OS patching
• MySQL system and patching knowledge
• MSSQL system and patching knowledge
• Maria DB system and patching knowledge
• Eagerness and willingness to pick up & adapt new skills and automation.

Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernizing key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernization.

Logicalis Group has an annualized revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

Interested applicants please submit your application with your expected salary and notice period to be considered for the role.

We regret that only shortlisted candidates will be notified.

As part of any recruitment process, we collect and processes personal data relating to job applicants. We are committed to being transparent about how we collect and use that data and to meeting our data protection obligations. By applying to this post and sending us your resume, you agree to the collection, use and/or disclosure of your personal data in the manner as set out in our Data Protection Notice for Job Applicants which can be found

Logicalis is committed to protecting your privacy.

Click below to view the data protection notice.

https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf.

Location: Tampines

I- Basic Function/General Scope of Work

The position takes overall responsibility of project management for all aspects (contract, commercial and technical) of the projects assigned. The position works closely with Project Manager so as to complete and achieve the projects’ objectives/ metrics as planned.

II- Key Duties & Responsibilities

1. Conducts site inspection, collects the data and transfers the information to design team to prepare drawings.

2. Verifies all drawings from design team prior to moving to construction phase.

3. Deals with customer requires related to drawings and requirements.

4. Coordinates with design team, customers and sub contractors during construction.

5. Checks and inspects the quality of work carried out by workers of subcontractors.

6. Assists and follows the assignments of project manager in ensuring that the projects are implemented on time, safety and in accordance with the customer requirements

7. Be responsible for testing and commissioning all equipment with subcontractors after installation.

8. Be responsible for customer training after project completed.

9. Be responsible for final inspection and collection the data for as built drawings.

10. The position is accountable for implementing assigned responsibilities and activities to attain project goals and objectives.

11. The position is accountable for strictly complying with Chubb’s Code of Ethics.

12. The position is accountable for implementing assigned responsibilities and activities to attain EH&S goals and objectives and complying with EH&S policies, applicable rules, procedures, and regulations.

III- Qualifications & Compentencies

The incumbent should possess:-

1- a degree in Engineering is required/preferred.

2- a minimum 3 years of Project Management knowledge, skills, experience.

3- Knowledge and experience in any kind of engineering management, problem solving, strong systematic and analytical thinking skills, strong knowledge of commercial terms and conditions, working within an ISO 9000 quality environment, strong coaching, influential and negotiation skills.

4- Good English communications and computer competencies.

5- Adaptability, Analytical Thinking, Teamwork, Communications, Listening and Ethics.

6- Experience in LTA projects is preferred.

Compensation & Benefits

• Annual Increment
• Performance Incentive Bonus
• Career Progression

For quick reply, please contact me at +65 85878287

Registration Number: R21100938

EA Licence No: 22C1301 (Unisearch Services Pte Ltd)

Responsibilities

Operational support and efficiency

• Perform scheduled preventive maintenance (PM) and troubleshoot equipment-related problems to minimize equipment downtime
• Resolve equipment issues and implement corrective and preventive actions
• Always aim to maximize uptime of equipment to sustain equipment performance
• Prepare and execute new equipment start-up by working with cross functional team
• Coordinate with process, integration and manufacturing engineers to ensure work is carried out efficiently to meet module objectives.
• Provide leadership in giving direction and systematic guidance to Equipment Engineer / Technologists/Technicians.

Record and reports

• Review, validate and analyze given reports
• Ensure staff's on-time submission and accuracy on the tool checklist or report

Documentation & Standard Operating Procedures

• Establish and implement all equipment specification, troubleshooting procedures, maintenance procedures, safety related documents and ensure compliance with corporate requirements and procedures
• Documentation of Corrective Action and Best-Known Methods for equipment to allow more efficient troubleshooting
• Lead and work with the supplier and cross function groups on new tool start up with necessary documentation, gantt chart, site preparation, facilities preparation, acceptance preparation, automation preparation and production readiness .

Cost efficiency

• Work with equipment vendors and spare parts suppliers to improve and develop new methods to achieve improvement in maintaining the tools
• Expected to involve actively in yield improvement, cost reduction, 2nd source suppliers and parts sourcing/testing, optimisation of new machine qualification release plan and cycle time reduction projects

Equipment improvement

• Participate in global key equipment exchange to improve and align strategy and plans
• UPkeep, monitor and control equipment performance indices (MTBF, MTTR, UPtime% , Errors Pareto list, WSPC and etc)
• Maintain optimum utilization of equipment and resources and constantly review methods of OEE management to reduce tool downtime and increase equipment throughput
• Develop and implement improvement/safety program of preventive maintenance task of machines
• Lead Technicians to participate in continuous improvement projects

Training and development

• Train/mentor Technicians and Engineers through OJT and continually upgrade their technical skills to cope with technological changes

Quality

• Participate in QIT programs to optimize equipment utilization and cost of maintenance
• Analyze trend, propose areas of quality improvement; Coordinate evaluation and implementation with relevant parties
• Lead or participate in quality related exchange to enhance improvement and preventions

Safety

• Ensure good housekeeping and safety practices in the Fab
• Work with HSE team to establish ,maintain tool and chemical safety related documents

Requirements

• Possess at least a Bachelor’s degree in engineering (Material Science, Chemical Engineering, Electronic/Electrical Engineering, Physis) with min 3 years experience as tool owner
• Preferable hands on experiences with knowledge on

1. Vapor phase decomposition- inductively coupled plasma-mass spectrometry(VPD -ICPMS)
2. Film measurement system
3. Visual and Sorter systems
4. Sem Vision
5. Bagging tool and Box cleaner tools
6. Automation material systems

• Skilled in JMP, Python and driven on root cause analysis techniques to aid on troubleshoot complex problems and provide root-cause fixes to recover/improve the tool and/or process
• A critical thinker team player who loves challenges, thrive on complex issues, multitasker and possess passion for learning
• Have good communication skills and time management discipline.

able to work comfortably and independently in construction site environment .

coordinate , meeting with consultant and maincon . plan and liaise with site drafter to prepare

required drawing .

able to read and understand construction drawing . assist project manger in site work .

upadte BQ and monitor inventories movement .

understand security and cctv system and equipment . have no bad record and need clearance from MHA .

submit drawing and attend RTO inspection .

Responsibilities of Process Engineer

· Process Technology development for Silicon wafer manufacturing

· Manage wafer manufacturing process in achieving quality, yield, quality and production targets.

· Collaborate with Technology counterparts globally on process alignment and qualification of new processes, suppliers and consumables if needed

· Work with cross-functional teams on process capability improvement and yield enhancement projects

· Coordinate troubleshooting of process issues and yield losses

· Drive for continuous process improvement and permanent solutions to resolve chronic process and quality issues.

· Develop best practices, routines and innovative solutions for continuous improvement

· Perform Statistical data analysis for process improvement and interpretation of data

· Apply problem solving methods (8D, Fishbone, DOE etc.) and risk analysis (like FMEA)

Requirements of Process Engineer

· University degree in Engineering or Science

· Min. 3 years relevant semicon/ manufacturing experience

· Knowledge of quality management systems, data analysis, Design of Experiments (DOE) and statistical process control (SPC)

· Proficient in statistical software like JMP, visual basic, database and queries will be an added advantage

· Self-motivated and able to work well in a team

· Good analytical and communication skills

· Willingness and curiosity to learn attitude

About the Role:

To maintain the service education system for trainers and distributors. This includes training on repair processes, installation, maintenance, and troubleshooting, as well as introducing new products by preparing training schedules and materials. The role also involves promptly tracking technical inquiries and providing remote support to other Business Centres and distributors, ensuring that all administrative documentation is accurate and complete to enhance efficiency and service quality. Additionally, it includes planning and reviewing the Quality Management System to improve repair quality in the repair centre.

Roles and responsibilities:

• ·Conduct in-service training on medical devices and related products for trainers in other Business Centres and distributors, including:

o Repair processes (assembly and disassembly)

o Installation and maintenance processes

o Troubleshooting

• Prepare service training and manage the introduction of new product repairs, including training materials and schedules.
• Establish a service education system for medical devices and related products for engineers in other Business Centres.
• Address technical inquiries and provide technical support (installation, maintenance, etc.) to Business Centres and distributors, both remotely and on-site (e.g., at hospitals).
• Ensure proper documentation, notification, tracking, and follow-up on all technical inquiries.
• Support Business Centres and distributors with all service and technical-related inquiries and activities.
• Escalate issues to higher-level support when necessary and act as a contact point between Business Centres and headquarters.
• Plan and review the Quality Management Systems of repair centers to secure and enhance repair quality.
• Perform any other tasks as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Diploma or Degree in any Electrical/Electronics/Mechanical Engineering Discipline
• At least 3 years of related experience in the medical device industry is highly preferred.
• Experience in technical support, including technical training.
• Experience with lean manufacturing and Six Sigma is preferred
• Strong hand-on skills and good eyesight.
• Willingness to travel to the Asia Pacific region if required.
• Proficient in the use of MS Office and its applications.
• Possess strong communication and troubleshooting skills.
• Able to work in a team environment and collaborate with staff across different age groups.
• A team player with enthusiasm for learning and the ability to work with minimal supervision.
• Strong troubleshooting and analytical skills.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg